Develop Bugs

[26-7-12]AndroPlus Ultimate |High Quality|Fast|Smooth|GB 2.3.3|Sense 2.1+3.0+3.5+4.0

Finally After Many days work & Debugging , I`m Release Great Rom... ​ Please Don`t share My ROM in other site without my permission ,Thanks Guy​
Specific Q&A/T thread for AndroPlus Ultimate ROM​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
​
Features
Android 2.3.3 - HTC WWE 2.50.405.2 (Ace) and 3.14.405.1 (Bravo) Very Stable , Fast , Smooth
First HD2 Rom with Aroma Installation
Kernel: marc1706's 2.6.35.14 Sense Kernel [v0.2.3]
This is improved version of stock ROM - no visual changes!
Very fast, clean & stable!
Full HTC Sense 2.1 + 3.0 Interface (You Can Select Needed Stuff For Sense 3.0)
SD Speed Increase (buffer = 3072) it`s faster than 2048, Copying into my SD-card class 4 over 4.3 MBps
Camera & Camcorder working and capture 800*480
Add Grate Tweak : Auto O/C + Auto Change Governor when ,Screen On/Off Max 1113600/Min 96000 ,for now Save lots Battery, usually 3 mhA
Grate Ram Script , Speed + Multitasking + Battery + Responding + Lag-free ( Now My Rom Very Fast )
Make Grate installation For Rom + Addons You Can All Time Add/Remove App In Your Rom ( I`m Work it over 50 Hour :$ )
Super Lite & Typical Mod installation For Advance user & Normal user (in super lite MOD after first boot ~ 280Mb free ram ) it`s Great
Add huge APN
Add Battery Percent % (Can Be Select Active/Inactive Or use stock style )
Sony Bravia-XLoad (Can Be Select Active/InActive)
Sony Bravia-Engine
Add free
HTC_IME + Dic From Sense 3.0
Arabic and Hebrew languages support!
Fully optimized and tweaked
Zipaligned (Improved RAM management)
Zipalign on boot (for user applications on data partition)
Fully de-odexed
Improved virtual memory management
Speed optimizations
60 MB ZRAM ready!
Swap ready (if you have swap partition in sd-card)
Advanced Power Menu (Can Be Select Fix/Unfix)
CRT Animation ON/Off (You can Active/Inactive )
Battery auto-calibration script, Now Don`t Need to use any app for calibrate battery
Excellent battery life! usually 3-5 mhA ( If you have more amount drain ,certainly you have Low signal strength )
Movie 720p Play Grate Without Any Lag
Auto cLK/MAGLDR Detect & Auto Fix Network
Add Theme Sense 4 Woooooooooow Its Very Beautiful
Multi-language (WWE)
4EXT Recovery support
Support almost 24h a day
Newest BusyBox 1.19.4 Stable
No Needed Full Wipe before installation
Super Fast Installation
and many more. . . !!!
Working
everything
Not Working
Nothing:laugh:
Requirements
CLK Or MAGLDR Boot Loader ( if you using cLK , Recommended use my link ,before install my cLK , take task29 )
CWM (CWM Recovery Touch Beta 8 Release Candidate 1, it`s better than other CWM )
Radio (2.15 Recommended)
Optional: 128Mb of swap partition
Brain
EU and TMOUS ROM Partition Size : 5/135/5 ( boot / system / cashe )
You must have an ext 2/3/4 partition on your SD-Card (512MB - 1GB recommended) ( You just Allow only one extX )
Your partitions in SD-card ,it should be similar :
FAT32------> ext X --------> SWAP
(XXXX MB)-( 512-1024 MB )-(128-256 MB)
​
Installation
After install CLK/MAGLDR
Go To CWM
Install Main Package ( --- AndroPlus(+).v X.X --- ) ( --- You must select Typical Or Lite --- )
Install Add-ons Package ( This section is important ,please read elucidation text`s and chose correct options )
Reboot
First boot takes approximately 5-7 minutes ( If the initial boot took more than 8 minutes , You must be a mistake , and you must follow these steps )
Format SD-Crad with SD Formater (select option and set FORMAT SIZE.... To > ON)
Go to CWM and select it`s ==> Advanced ==> Partition SD Card ==> 1024 or 512M ==> 128M
task 29
Go to First Row Installation
Follow instructions on screen ( Setup )
High Recommended Instructions
important suggestion 01: Previous install my rom , Go to SD card and remove All Folder for Previous Android Rom
important suggestion 02: High Recommended for you ,for increase speed and most free ram always , Use light installations and chose needed apps
important suggestion 03: Package sense 3.0 without lock-screen is faster than with lock-screen
After First Boot : Give Rom ~2 minutes to settle after lock screen before setting up. (setup will be faster)
Give it ~2 minutes to settle then reboot before use
go to All Apps/Superuser and press windows key then in Preferences/Automatic response, select allow
go to All Apps/Effect Control and Set Visible speed & Transition speed to 3 (Important for have nice Transition)
go to All Apps/faster fix for changing GPS Location To your Region ( faster GPS )
go to All Apps/A2SDGUI And in dalvik panel chose Dalvik Cash On SD-EXT then click on Move and Rebuild key ( For more space in internal storage )( Optional )
go to All Apps/DSPManager /Headset and in Bass Boost set to Enable , change select Effect Strength to Moderate ,in Headset Virtual Room... Set to Enable and change Room type to Stage (--- important ----)
if you have any problem about send or receive mms or GPRS Go to setting And set manually APN`s
Read F.A.Q (--- important ----)
Enjoy the fastest Sense Rom
Warnings
Please don`t use setcpu and other like app for change O/C or Governor ( Don`t need to O/C ,Rom work fast without any lag )
You Don't allow Restore System app with Titanium Backup or other like app , on previous
rom into this rom ( crash and have bug into system ) you can only restore user app with data ( ---- it's important ----- )
You Don`t allow restore User Data with CWM
Please don`t use any app for auto kill app ( like advance task killer or other app ) These are useless app`s
Tips to increase battery life
Avoid using live wallpaper, especially weather LWP
Change Wi-Fi Sleep policy: Settings ==> Wireless & networks ==> Wi-Fi Settings ==> Advanced ==> WiFi sleep policy ==> 15min
If you don't care about faster 3G consider switching to 2g only: Settings ==> Wireless & networks ==> Mobile Networks ==> Network Mode ==> GSM Only
Do not login to HTC HUB / HTC Sense account !
Disable Phone Finder : Settings ==> Location
Disable weather sounds & clock widget full screen animation ( But i love this )
Increase Facebook/twitter/stocks sync interval to 4hours or more
Now,i send big Thanks to all Dev in XDA and other site for hard working
and special Thanks for good Dev & great my friend :
XxXPachaXxX , e334 , dungphp , marc1706 , carl1961 ,TarekNajem04 , edward3120 ( for make video )
kuzibri ( for Create Q/A/T Thread )
Specific Q&A/T thread for AndroPlus Ultimate ROM
​​

Don`t Forget to thank about my Hard Working...
Rom & Add on:
​
.
.
Fast Fix : (Facebook Fix)​.
.
.
Mirror V3 (Tell me if is have error)
Rom
Addon
[/CENTER]
Rosie Mod Drawer 4.4 : Download
Mirror AndroPlus Ultimate : Rom --- & ---Addons
Mirror AndroPlus V2.0 : Rom --- & ---Addons (Thanks beileroord)

Changelog​
Ultimate 25,Jul,2012
finally Fix Camcorder 800*480 in GB (but it need some debugging and improvement , hope other developer can help me for ... ,So for better capturing use 640*480 ) and you must use lgcamera App for capturing ,and i suggest to you, all time use lgcamera pro its more stable as lgcamera free,you can find it (lgcamera pro) in Google
Fix Auto-Brightness Level
Fix Call Sound Problem
Fix Some Wrong Code in Aroma installer
Fix Xloud
Add Fancy Rotation Animation Like Sense 3.5
Add Rotatable Rosie
Add Roise app Drawer 4.5 & 4.4
Add Documents To Go 3.0
Add DSP Manager last version
Add Slide to Remover Notification
Add New Marc1706 Kernel 0.2.3
Add AndroPlus Boot Animation
Add Green theme Sense 4
Remove Google Play
Remove PDF Viewer
Update Aroma Installer to V2.0
Fix Some wrong code in aroma installer
and more more ...
Click to expand...
Click to collapse
V2.0 07,May,2012
More Free Ram ~280 MB in Lite Mode lol
Add Stock battery style with fixed Slide Downing Notification Panel
Add Beautiful GB Animation Transition to Stock Framework-res.apk
Add some nice Sound & Ringtone from Sense 4.0
Add New Market( Google Play 3.5.16 )
Add UI Sense 3.5 ,all popup menu and button from Sense 3.5 ( Now My Rom very like sense 3.5 )
Add New marc kernel 0.2.1
Add One item in aroma installation for Revert back to stock weather sense 2.1
Add Auto Fix permission script
Add more Smoothness tweak + some lib
Fix Friend Stream
Fix thing Lag For unlock screen
Fix YouTube HD Movie Playback ( Now you can ,see HD movie in YouTube )
Fix wrong code in Aroma Installer and alot of change
Fix Freezing in Aroma Installer ( Please wait... )
Fix Auto Reboot issue ( need test )
Fix crashing Clock widget on Theme Sense 4
fix Chinese IME
fix switch network connection
fix turn on network connection issue
fix All Force close in Package Sense 3.0
a lot of edit and added code in Aroma Installer
Reduce Auto-Brightness Level For more battery Saving
Remove Transparent background in some panel in Sense 3
change default font to conffora
Revert back up-datable app to /data/app
Update Facebook
Update tweeter
Update Gmail
Update Google map
Update Google+
Removed Paid App
more more more...
Click to expand...
Click to collapse
V1.0 17.Apr.2012
Add huge APN
Addfree
Add HTC_IME + Dic Frome Sense 3.0
Add Stock HTC boot screen
Add Stock HTC Bootsound (Can Be Select Active/InActive)
Add Effect Control For Change Speed, Visible & Transition
Add Newest BusyBox 1.19.4 Stable
Add Messageing Sense 3
Add MX Video Player pro 1.5a
Add Auto cLK/MAGLDR Detect & Auto Fix Nerwork
Add VM Managment Tweaks
Add 128MB Zram
Add Auto Zipalign For Data/app
Add Titanium Backup Pro 4
Add Faster Fix For Change GPS location
Sony Bravia-XLoad (Can Be Select Active/InActive)
Sony Bravia-Engine
Hacked Build.Prob (By Me )
Boost Speed & Performance (Now my Rom Work Without Any lag )
Speed Up WIFI & GPRS
Updated SU
Fix Lag For Slid Downing Notification Panel ,Now Is Fastest Drop Down
Fix Market Downloading Problem
Fix VPN
Fix Tmous MMS issue (need test)
Fix Arabic and Hebrew languages support!
Lot Tweak in init.gz
Make Grate installation For Rom + Addons You Can All Time Add/Remove App In Your Rom ( I`m Work it over 50 Hour :$ )
Revert bake To Stock Auto Brithness Level
Add Theme Sense 4 Woooooooooow Its Very Beautiful
Add Beautiful GB Animation and Some Icon For Stock GB ,Very Nice
Disable USB Debugging notification (Bigger space in notification panel)
And MUCH more!
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
F.A.Q​
Q 1: I can't send/receive MMS or I can't connect with mobile data connection. How can I fix it?
A: Please check your MMS settings or mobile data connection APN settings.for better please set manually APN`S
Click to expand...
Click to collapse
Q 2: My GPS signal is very weak or GPS is not working at all. How can I fix it?
A: There are some solutions:
1. You can use FasterFix to improve your signal strength.
2. You can download and install GPS Status & Toolbox to manage your GPS settings.
Click to expand...
Click to collapse
Q 3: My clock/weather widget doesn't show my location. How can I fix it?
A: Please clear data from Google Maps, Clock Widget, Weather, HTC weather sync provider and Weather Provider.
Click to expand...
Click to collapse
Q 4: My Quadrant score is not as high as on different ROM. What does it mean?​ A: It means absolutely nothing. Benchmarks on Android System are more or less lottery and they are not showing the real system performance.
There are many settings that can force Quadrant to show more then 1800 points but it's faked performance, that actually can slow down your phone in some circumstances.
What I always emphasize is a real performance, the one you can feel under your fingers. Remember that I/O has some limit and surpassing it shows just a numbers without true ratio.
Click to expand...
Click to collapse
Q 5: in my rom sometime have lag where is problem?​ A: this rom after many test don`t have any lag,then certainly you have Low signal strength in all android device this problem exist Low signal strength = must battery drain & add lagy in sense,you can test it when you have this problem please set device to offline ,now you can work smoothly and fast with rom but this is no problem for rom
Click to expand...
Click to collapse
Q 4: My phone ,after installaled Rom pack & Addons freeze on first boot screen (loading...) where problem?
A: you don't read requirements. And installation steps,please go this steps and read it.
Click to expand...
Click to collapse
Q 5: How to understand about calibrated battery?
A: With Root Explorer Go to this address /data/data ==> and go to the end off the list ,if file .battery-calibrated is exist ,the battery is calibrated well and there is no need to use other app for calibrate it ,
B: if can`t see this file ==> .battery-calibrated ,you must connect your battery charger and wait to created this file
Click to expand...
Click to collapse
Q 6: How To Add / Remove system app ?
A: it`s very easy, Go to CWM ==> AndroPlus(+).vX.0.zip (--- Rom package ---) in Install Type page select Add / Remove , Now you can install or uninstall everything
Click to expand...
Click to collapse
Q 7: Q: We how can thanks to you?
A: Just press the thanks button, and if you really want to thank me then read here: Soon I add Donate link
Click to expand...
Click to collapse
Q 8:My keyboard don`t Auto showed in Message app and i have thing lag in Message app, where is it Problem?
A: Go to contacts and change name contact to English Character ,if you typed Name Your Contact with Arabic Or Persian Character with all sense rom have like problem.
Click to expand...
Click to collapse

I need this one sorry !! hahaha j/k ... waiting for your release!

Waiting for release
GL

efebe said:
I need this one sorry !! hahaha j/k ... waiting for your release!
Click to expand...
Click to collapse
yz.hd said:
Waiting for release
GL
Click to expand...
Click to collapse
loooool your guys very fast

I'm going to sleep, I'll download and taste it tomorrow, if it's ready to download.
I like the combination of old Sense, with Ginger rom.

Working like a "CHARM" Thanks a lot for you hard and great work mate!!

guys please waiting ,i`m don`t sleep for 20h

Thank you
waiting .....

Giggity!
...waiting here also...

This looks very promising, can't wait to give it a test.Thanks for your hard work and lack of sleep

is it possable to add beats audio and data2ext mod inside?
it looks grate, waiting for dl link

TiltMasta said:
This looks very promising, can't wait to give it a test.Thanks for your hard work and lack of sleep
Click to expand...
Click to collapse
thanks ,yes it`s really better than all sense 2.1+3.0 and think all over rom for hd2 ,Because I tried that make one Ultimate rom with work all stuff,
for now this rom with great installation & super fast & most complete rom for HD2
only one problem exist and its camcoder lag,like other build,but in next plane hope fix comcoder lag,
i over 2 week day and night ,work and debugging on this great build for fix any problem,now you can`t find any lag in sense

kane159 said:
is it possable to add beats audio and data2ext mod inside?
it looks grate, waiting for dl link
Click to expand...
Click to collapse
beats audio really use less option for hd2 because beats audio work great with original headset for beats,but we don`t have this headset
for data2ext yes possible but now i don`t have Enough time

essi_baba said:
beats audio really use less option for hd2 because beats audio work great with original headset for beats,but we don`t have this headset
for data2ext yes possible but now i don`t have Enough time
Click to expand...
Click to collapse
The rom looks really promising. Will give it a try once you have the links up. Thankx a lot for your hard work. Looking at the screens i can say this must have been your life priority atleast for a few days.
AS for beats audio. Please, please dont add it. Its just a nonsense. I cant understand why some would actually prefer it. If anyone wants it badly please consider leaving it as an optional add-on.
Since some may argue about my judgement, all i can say is there is a special audio chip integrated into the newer devices which gets activated when it detects the beats audio headphone is inserted. thus chip+BA headphone drives the awesome sound. But HD2 does not. All it really does is take an extra space.

essi_baba said:
thanks ,yes it`s really better than all sense 2.1+3.0 and think all over rom for hd2 ,Because I tried that make one Ultimate rom with work all stuff,
for now this rom with great installation & super fast & most complete rom for HD2
only one problem exist and its camcoder lag,like other build,but in next plane hope fix comcoder lag,
i over 2 week day and night ,work and debugging on this great build for fix any problem,now you can`t find any lag in sense
Click to expand...
Click to collapse
I anticipate it will be a great addition to HD2 Sense roms library, looks like you have put a lot of hard work and dedication into it and thank you for that keep up the good work and can't wait to provide some feedback to help you further improve things, if that is even necessary . Hope you get some sleep soon my friend!

looking very gud cant wait for this , is ad hoc and wifi hotspot working makesure abt that thanks a lot

Wait for download link.

sagarchow said:
looking very gud cant wait for this , is ad hoc and wifi hotspot working makesure abt that thanks a lot
Click to expand...
Click to collapse
for me work great

[How To] Work Around With Facebook Lag

Hey, mate. Let me tell you my trick to solve this issue.
Facebook apps need a lot of resource, both Processor and RAM. Since the app will render image, JavaScript, and HTML 5. Our device is low-end-device which is having bad Processor and Memory (RAM). To solve this issue, we need to give a lot of free space of RAM and Processor.
NOTE: We can't do much things to solve the App, but we can manage Processor and Memory consumption
I usually using greenify at this point.
Skip * steps if you're using greenify free version
1. Install Greenify(Free version is OK though)
2. Install SuperSU. I recommend this app if you having issue the apps are not hibernated automatically when the device is entering sleep mode.
* 3. Install Xposed Installer
4. (skip this step if you already have superSU) Open SuperSU, then update SU binary through CWM - the phone will reboot to recovery and updating SU binary automatically
* 5. Open Xposed Installer - Choose Framework - Choose Install / Update
* 6. Reboot
* 7. Open Xposed Installer - Choose Modules - Check Greenify
* 8. Reboot
9. Open Greenify - Tap on + Icon
10. Choose any apps you want to hibernate
* TIPS *
- If you using Hangouts with SMS / MMS feature, don't greenify this app. Otherwise, you won't get any notification when new SMS is arrived.
- Don't greenify (hibernate) Instant Messaging like WhatsApp, LINE, etc. BBM using a lot of RAM, you can greenify this app to get rid of lag.
11. When you're done with those apps, tap option button (Letf soft key from "HOME" hard key) - Still in greenify
12. Choose Experimental features
13. Check boost mode
14. Check Keep Notifications
15. Check Wake-up Tracker & Cutoff
16. Check Block App State Abuse
Don't wory with dark options, those option are only available on Donation Package. That's it, and you are done.
NB:
- I don't care if I can't receive notification from Facebook immediately. I'd rather keep my phone cold, calm, and my battery is save.
- If you like Greenify App, Please Buy Donation Package on Google Play

You don´t need Xposed if you are just using the free version of Greenify.
You only need it when you are willing to use the paid donation version to greenify system apps too. So you tutorial is either not complete or you skipped this information for some reason.

Edited
honeyx said:
You don´t need Xposed if you are just using the free version of Greenify.
You only need it when you are willing to use the paid donation version to greenify system apps too. So you tutorial is either not complete or you skipped this information for some reason.
Click to expand...
Click to collapse
Edited. Thanks for the correction, Sir. :highfive:

one thing i don't like about greenify is it takes too long to start fb app after hibernate it. for now i just use disable service to disable most of fb app service
Maido Ari...

xSmart007x said:
one thing i don't like about greenify is it takes too long to start fb app after hibernate it. for now i just use disable service to disable most of fb app service
Maido Ari...
Click to expand...
Click to collapse
But this is not the fault of Greenify but because FB is so bloated. Personally this is a must have app and if you ask me it should be part of each Android ROM or at least something simmilar build in.

honeyx said:
But this is not the fault of Greenify but because FB is so bloated. Personally this is a must have app and if you ask me it should be part of each Android ROM or at least something simmilar build in.
Click to expand...
Click to collapse
yea i know
Maido Ari...

Thank you! Very helpful.

This is a great thread! Thanks for posting this. I needed some answers about this too..

In kitkat 4.4 , when you install xposed framework, the runtime changing won't work.
If you remove it, it works.So those those who change runtimes can forget Xposed Framework.
Sent from my GT-I8150 using XDA Premium 4 mobile app

[UPDATED] How to have the best battery life possible in S3 Neo

In this thread I'll share with you what I use and what I did to have the best battery life I could with our phone.​
I don't know if this will work with all the models, but with mine (GT-I9301I) it works like a charm
WARNING
This "tutorial" is just for the stock KitKat ROM!!
What we need:
Root Access
Xposed
Custom Recovery (CWM or TWRP)
Busybox
So, before I start to tell you guys how to do what I did, I'll tell you all the apps/xposed modules you'll need:
Apps:
Kernel Adiutor
Amplify
PowerNap (you need to become a alpha tester to have access to this app)
Greenify (if you have donation packake it's even better)
Root Uninstaller
Xposed Modules:
Gravity Box [KK]
ApsOpsXposed
All the apps listed above, except Kernel Adiutor and Greenify, will need Xposed to be launched! But all, except Greenify, need root
Let's start with this kind of tutorial
First thing I recommend to do is flashing the Sev3n Kernel! You can download it from here.
If you have your phone rooted and with custom recovery you must know how to do this
After flashing the kernel, go to Kernel Adiutor and in the CPU tab change the minimum frequency to 300 and the maximum frequency to 1401, change the CPU Governor to "smartmax".
Now go to CPU Hotplug tab and disable MPDecision and enable MSM Hotplug.
Now go to the Scheduler tab and change the Scheduler to "cfq".
Now, to finish, go to the Profiles tab, click on the "+", click select all and name that what you want. Why should we create a profile? Well, that's because everytime you reboot your phone your settings are going to be lost. That way you just need to go to Kernel Adiutor and select the profile instead of modifying all the things again.
Now we'll start configuring the apps and the modules!
Amplify:
This app is needed to change Wakelocks and Alarms values.
If you don't know what a Wakelock is, search on google
You'll need to have the donation package to do the following steps.
Be very carefull when writing/copy-pasting the wakelocks/alarms, because if there is a extra letter, it can even be a blank space, you'll not going to be able to find them. So, be meticulous (hope this is how you write it )
Wakelocks to change:
"NetworkStats" - 800
"Wakeful StateMachine: GeofencerStateMachine" - 10800
"GCoreFlp" - 10800
"*net_scheduler*" - 10800
"Icing" - 10800
"NfcService:mRoutingWakeLock" - 10800
"SyncLoopWakeLock" - 10800
"NlpWakeLock" - 41400
"AsyncService" - 10800
Alarms to change:
"com.google.android.intent.action.SEND_IDLE" - 43200
"com.google.android.finsky.services.ContentSyncService" - 7200
"com.google.android.intent.action.GCM_RECONNECT" - 43200
"com.google.android.gms/ .checkin.EventLogService$Receiver" - 86400
"com.android.server.action.NETWORKS_STATS_POLL" - 10800
"android.net.ConnectivityService.action.PKT_CNT_SAMPLE_INTERVAL_ELAPSED" - 10800
"com.google.android.gms.gcm.ACTION_CHECK_QUEUE" - 43200
"com.google.android.gms.common.receiver.LOG_CORE_ANALYTICS" - 9999999
"com.google.android.apps.hangouts.CLEANUP_DB" - 10800
"android.content.syncmanager.SYNC_ALARM" - 43200
Now, to finish the Amplify configuration, go to the "Alarms" section and click on the middle icon in the top right corner.After that, click on plus and, in the first spot, write "ALARM_WAKEUP[0-9]{4,}" and on the second spot write "86400".
PowerNap:
In this app we just need to change one thing.
Open the app and click on "Endurance Mode". Once you're there, click on "Activation" and drag the circle all the way to the right and select the "Enable while charging" option. Now just press "OK".
Greenify:
This app is a piece of cake to configure!
If you have Donation Package, go to "Experimental feature..." in the 3dot menu. Once you're there, change the working mode to "Boost" and select the "Greenifying System Apps" option.
Now return the the app's home screen and tap the "+" button.
Now you'll see a list of apps and things they do. Select the most 3rd party apps you can and choose, but very carefully, some system apps, like "S Memo" and stuff like that. But never choose "SuperSU"!!
Gravity Box [KK]:
The only good thing to the battery we can do on this app is lowering the minimum brightness level to 1.
To do this, tap on the "Display Tweaks" tab and then tap "Brightness Settings". There, switch the top button to "ON" and drag the "Minimum brightness level" circle all the way to the left.
ApsOpsXposed:
This app doesn't have too much to learn, but takes a bit off time to reach the configs we need.
What I did was just removing all the Location permissions and removing all the Startup permissions.
Root Uninstaller:
Well, our stock ROM comes with a service called "Exchange Service", and it drains battery A LOT!!
So, the only solution to solve that drain is either freeze it or uninstall it! I recommend you to freeze the app, but if you decide to uninstall it, make a backup of it
Believe me, this will save you A LOT of battery
And this is it, we reached the finish line. Well, hope I could help you guys!!
This worked for me, I can't promisse it'll work for you. If you need something, just reply to this and I'll help as soon as I can
Kisses :*
Threads/posts used to create this thread:
http://forum.xda-developers.com/showpost.php?p=65725420&postcount=5
✭[GUIDE][07-02-2016]Extreme Battery Life Thread(Greenify+Amplify+Power Nap)✭

GUIDE: FIX S7 LAG FROM ROOT! Works on ALL S7 Variants (& Almost ALL Android Phones)

GUIDE: FIX S7 LAG FROM ROOT! Works on ALL S7 Variants (& Almost ALL Android Phones)
Hey All,
I've found a GREAT PROGRAM that'll fix ALL your lag issues after rooting the S7, called Gov-Tuner.
I've tested by ODIN-ing back to stock (PE1 firmware) and my results were INCREDIBLE, though you do not have to (YMMV)!!
I'm also including Install instructions for Viper4Android Sony Beats 4.8 Universal Edition, SELinux Mode Changer, and what apps to freeze with BootManager - An XPOSED Module - below as these will also help speed up the phone AND provide even more compatibility to install most apps! (for example, SELinux MUST be set to permissive for V4A if you want to install any version OTHER THAN V4A Sony Beats 4.8 Universal Edition).
UPDATE: I just tested a "Ram Expander" type program and I had VERY different results each time I tried. However, my overall result was that it DID help - though there are costs. Read More Below!
I TAKE NO CREDIT for GovTuner, SELINUXChanger, V4A (And all variants) are NOT my programs! Please support the developer(s) of these incredible mods if it works for you! They have spent a LOT of time and effort to make something amazing & should be supported if you use them!
Now on to the instructions...
DISCLAIMER:
You take FULL responsibility for installing this mod. IF it brick's your phone, causes nuclear disaster, or blows up the planet, do not blame me... Well, if you do blow up the planet and I'm not one of the survivors, then you can blame me - otherwise, it's YOUR fault!!
(Now that I've covered myself, on to the instructions)
Install on a new, clean, and/or reset phone -
1)Reset phone completely to stock (no root) to PE1 or PF2 firmware (PE1 worked best for me for some reason)
2) Root Phone (g930v) - Follow guide from here: http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
3) Flash v15 FIX universal from OP located here: http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
I had trouble with the v15 Universal Fix on PF2 firmware, but Others have reported it works. So it's up to you...
4) Flash XPosed firmware IF you want to run XPOSED (You can use Wanam's framework v86.0 or Topjo's v86.2 - It's been mentioned that topojo's framework is smoother, but I've NEVER used it. Please report back and let use know. (let phone reboot) -
Install XPOSED APK at any time
5) Flash Gov-Tuner (v2.6 Latest Version as of writing this) (reboot phone)
Download From here: http://forum.xda-developers.com/devdb/project/?id=16012#downloads
GovTuner's Project Thread: http://forum.xda-developers.com/and...mod-gov-tuner-project-29th-june-2016-t3407828
6) Install Universal INIT.D and set the toggle to "ON" (From playstore) - Or flash a mod to give INIT.D support without needing an app
7) Install L-SPEED (Playstore) and either use my settings to make your phone INSANELY BLAZING FAST (available below) OR the settings suggested from this site after the LSPEED button -
http://forum.xda-developers.com/ver...uide-fine-tuning-performance-battery-t3417804
8) Install Terminal app (From Playstore)
9) Install an app to change your governor (ir. Kernel Auditor, Rom Toolbox, etc... from Play store)
10) Use app to select the Governor you want to use - (ie. interactive, ondemand, etc) - I prefer INTERACTIVE & suggest you select it - (if it's not already selected & running)
11) Open your preferred terminal app (from phone) to run GOVTUNER
(instructions with commands below - also available on Gov-Tuners Project Thread)
http://forum.xda-developers.com/and...mod-gov-tuner-project-29th-june-2016-t3407828
11a) in terminal, type "su" (without quotes and hit enter)
11b) in terminal, type "govtuner" (without quotes and hit enter) - Program will make sure you meet all requirements
11c) You should see a menu with 3 profiles available - Battery, Balanced, and Performance. (1, 2, & 3 respectively)
11d) Select the number the corresponds to the profile you want and then hit enter. After it configures you should see up at the top left the profile you selected running in some kind of color - (For instance, Performance is written in blue)
Gov-Tuner Project Thread here: http://forum.xda-developers.com/and...mod-gov-tuner-project-29th-june-2016-t3407828
12) PROFIT!!! Change & Test different governors AND profiles to get your phone to whatever you prefer.
Whenever you want to change profile, use the govtuner command.
Whenever you change your governor (through romtoolbox, kernel auditor) and you still want to use the same profile you last selected, then you only need to run the "tune" command.
*** Scroll Down to view a list of apps you should freeze ***
Install Gov-Tuner without Resetting Phone
(MUST HAVE ROOT)
1) Download GovTuner from here: http://forum.xda-developers.com/devdb/project/?id=16012#downloads
2) Install Universal INIT.D (Playstore) - Open app and set toggle to "ON"
3) Install Terminal (Playstore)
4) Install L-SPEED (Playstore) - Use my L-SPEED BLAZING FAST settings offered below (at reduced run time) OR the suggested settings from this thread - http://forum.xda-developers.com/ver...uide-fine-tuning-performance-battery-t3417804 where you'll get a slight performance increase with more run time. (Reboot phone)
4) install an app that'll change your governor (ie. Kernel Auditor, Rom Toolbox, etc.) (Playstore) - Only if you want to change governor
5) Flash Govtuner (v2.6 is latest version at time of writing) with Flashfire's - use OTA flashing option
6) Change governor ONLY IF YOU WANT - (interactive, ondemand, etc) -
I suggest selecting "INTERACTIVE" governor if it's not already running.
7) Open terminal app from phone and run GOVTUNER with the following commands (link to GovTuner Thread above)
7a) in terminal, type "su" (without quotes and hit enter)
7b) in terminal, type "govtuner" (without quotes and hit enter)
7c) You should see a menu with 3 profiles available - Battery, Balanced, and Performance. (1, 2, & 3 respectively)
7d) Select the number the coorosponds to the profile you want (1-Battery, 2-Balanced, 3-Performance) and then hit enter. After it configures you should see up at the top of terminal windows the profile you selected - in some kind of color - (For instance, Performance is written in blue)
8) PROFIT! You may want to test each profile with the different governor(s) until you get EXACTLY what you want. (Long battery life, More performance, etc)
*** Scroll Down for a list of apps to freeze ***
My L-SPEED Settings for an
INSANE PERFORMANCE BOOST!
My Governor is set to "INTERACTIVE" (used Kernel auditor) & the GOVTUNER profile is set to "PERFORMANCE"! (used govtuner within terminal app).These settings will give you an INSANE performance boost, and my runtime is usually 18 hours.
L-SPEED Settings:
Main tweaks Option (From MAIN MENU options)
You can "KILL MEDIA SERVER" manually from within lspeed - It will automatically run on startup.
Kernel Modifications:
Kernel Tweak - Disabled
Kernel Sleepers Optimization - Enabled
Under System Tweaks
Battery Improvement - Enabled
Faster Boot - Enabled
WiFi Sleeper - disabled (you preference)
Flag Tuner - Enabled (I recall a much better flag tuner mod that could be flashed. If its still available, you should use/flash it & disable this setting. The developer of LSPEED was the one who said this & suggested it to us when LSPEED was a flashed mod.
Assertive Display - Enabled
UI Optimizations:
Improve Scrolling - Enabled
Liquid Smooth UI - Enabled
Debugging Options Menu:
Disable Debugging - Enabled
Disable Kernel Panic - disabled
Other Tweaks Menu:
Better In Call audio - enable
Improve image quality - enable
MISC Tweaks - disabled
CPU Tuner Option From main Menu Options
CPU TUNING MENU:
CPU Optimizer - Enabled (Might not need with govtuner running, but I've used with this enabled and hasn't cause a prob - YET... lOl)
LNET OPTIMIZER (From MAIN MENU)
LNET Tweaks Options
NET BUFFERS - BIG
RIL Tweaks - enabled
LNET OPTIMIZATIONS Options
Google DNS - Disabled (Your choice)
Faster Streaming - Enabled
Fast Dormancy - Enabled
IO Tweaks (From Main menu)
Storage IO Tweaks Options
SD Tweak -Aggressive (This sets SD CARD cache amount. I'm using a 256GB Micro SD card and the aggressive setting changes the cache to 2048kb - for me)
IO Boost - Enabled
IO Extended Queue - Enabled
Partition Remount - Enabled
Virtual Memory (From main Menu)
Memory Management Tweaks
OOM Killer - Enabled
Cache Reclaiming - DOUBLE (This option WILL drain battery faster)
Cache Allocation - Medium
RAM Manager (From main Menu)
RAM Manager Options
Ram Manager - (I change this depending on what I'm doing between Multitasking or Gaming - though I hardly EVER play games)
Seeder (Main Menu)
Seeder Options
Seeder - Aggressive (This will drain battery a little faster but has given me AMAZING performance increases!) I'd suggest you try aggressive and work your way through each option to see where it takes you and how much battery / speed you gain / lose!
Cleaner (From Main Menu)
Cache Cleaner
(You can run whatever you'd like - I'd suggest running "Clean Junk Files and wipe cache partition & dalvik cache)
Cleaner Options:
Run Cleaner On Boot - Enable (You do NOT have to set it to enabled, but I prefer to clean things up at boot)
FSTRIM (From Main Menu)
FSTrin On Boot - Enabled (Again, it's not necessary to run this, but I do to keep things clean at all times and trimmed, too!) heh
Create a backup of these settings from within LSPEED just in case - you never know when you'll need to restore the settings.
Make SURE you create a backup of the setting you've just set, AND be certain that LSPEED can launch upon startup / bootup! (VERY IMPORTANT!)
SELinux Mode Changer v3.2
(Change From Enforcing To permissive)
1) Download SELinuxModeChanger from here - http://forum.xda-developers.com/devdb/project/dl/?id=12506
2) Install App
3) Run App and select permissive
4) Enjoy
As a side note, Viper4Android requires SELinux to be set to permissive (EXCEPT Viper4Android Sony Beats v4.8 Universal Edition located here with install instructions)! Can anyone confirm that V4A's latest version worked on the S7 with SELinux set to permissive? I will be testing later on, but please let us all know if possible! Thanks!
ROEHSOFT RAM Expander
(Additional SWAP File) To Speed Up S7
Here are the install instructions -
1) Download ROEHSOFT Ram Expander from the Play Store: https://play.google.com/store/apps/details?id=com.swapit.expander.de&hl=en (There is a FREE & PAID version - get paid version IF it works for you!)
2) You will now need to create, on your MICROSD card (External Storage) a 4GB partition - Please be warned, when you create a partition you can lose ALL your data. I would suggest MiniTool Partition. I'd make the first partition your storage partition (where you store pictures taken, music, etc), and the second partition as the the SWAP partition. Again, ONLY MAKE THE SWAP PARTITION 4GB! You can format the swap partition as a SWAP file system OR in ext4. Either way, it's your call. I found the SWAP file system to be a little better, but you'll need to try them out and see what works best for you.
3) Put microSD back in phone and launch ROEHSOFT's Ram Expander. Give SU permission. Click the menu at the top right and select swap location.
4) Run the app - At the bottom select the "Optimal Values".
5) It will ask you want profile you want (similar to GOVTUNER, but they have NOTHING to do with each other!). You can select Balanced, Gamers, Multitaking, etc...
6) It will ask you to select the directory to use as the swap location - MAKE SURE YOU SELECT THE CORRECT LOCATION BECAUSE it will DELETE ALL INFO ON THAT PARTITION SELECTED! BE EXTRA SURE as I'm not responsible if you select the wrong partition and lose EVERYTHING!
7) Let it do it's thing and enjoy! You'll only need to change the swappiness and possibly the cache.
7b) DO NOT SELECT PERFECT KERNEL unless you KNOW it will work!
7c) DO NOT SET TO AUTORUN until you know it works and does not cause boot loops, probs, etc..
8) ENJOY!
This really did speed up my phone (G930V - S7), and I was amazed because I didn't believe it would, HOWEVER, there is a cost. This CAN heat up your phone since it's writing to the microSD card. If you're playing games and using it a lot, your phone will heat up and the battery will be drained at an insane rate! But, the speed increase was impressive. Like everything else, it's a trade off...
Please post and let me / us know how this works for you!
Suggested Apps To Freeze with
BOOT MANAGER (Xposed App) and/or TitaniumBackup
Here are the apps that CAN be FROZEN with your favorite app (Titanium Backup, App Disabler, etc)
1)Game Launcher (ONLY If you want)
2)EMERGENCY Launcher (ONLY THE EMERGENCY LAUNCHER - do NOT confuse with ANY of the other launchers. Double check to make sure you are freezing the correct one, otherwise you will be in a WORLD of trouble!! - Located in system/app/emergencylauncher/emergencylauncher.apk)
3)SamsungDLPService (system/spp/SamsungDLPService/SamsungDLPService.APK)
4)Security Policy updates (system/priv-app/SPDClient/SPDClient.apk) - Freezing this SHOULD help those who haven't had success running XPOSED due to constant reboots.
5)SecurityLogAgent (system/app/SecurityLogAgent/SecutiryLogAgent.apk)
6)System Updates (system/app/SDM/SDM.APK)
7)Verizon Store Demo Mode (system/priv-app/com.customermobile.preload.vzw/com.customermobile.preload.vzw.apk)
----------------------------------------
Apps To Disable Through BOOTMANAGER
(FREE XPOSED App through the download section of XPOSED APP)
You can disable ALMOST EVERY APP that is running, however... DO NOT disable ANY SYSTEM apps unless you know what you're doing.
The ONLY APPS I can suggest you DO NOT "STOP" are the following:
1) Universal INIT.D
2) L-SPEED
3) Kernel Modification Programs (if Any) - Kernel Auditor, Rom ToolBox, etc...
4) IF by some chance you have an issue after disabling an app, just launch BOOTMANAGER and re-enable the app!
5) You can also "FASTBOOT" through bootmanager where it will disable EVERY SINGLE USER APP you have. Use this if your having a problem with bootup, an app, etc... It's great for diagnostic purposes OR to really speed up your phone if/when needed!
ViperATMOS Sony Beats v4.8 Universal Edition OR
ViperAtmos Sony Beats 5.5 Edition Installation Instructions for phones with
SELinux PERMISSIVE or ENFORCING!
BOTH versions DOES work with the Galaxy S7 Verizon Variant (G930V)!
This version of V4A (Viper4ATMOS Sony Beats v4.8 Universal Edition) runs with SELINUX set to enforcing or permissive unlike other versions! (Thanks to @srish2 for the info)!
1) Download the flashable zip (Direct Download Link: http://forum.xda-developers.com/attachment.php?attachmentid=3701983&d=1459364213)
2) Open flashfire and select OTA flash option
3) Select the downloaded zip file to flash from within flashfire
4) FLASH (let phone reboot)
5) Look in your app drawer and you SHOULD see a DOLBY APP & the Viper4Atmos or Viper4Android app.
Set your audio to whatever you prefer from within those apps. (You may want to go to the project's thread to see what is suggested) Here is the Link To Viper4Android, DOLBY, Viper4ATMOS, & Viper4DD's Project Thread - http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
5a)PLEASE NOTE - RUNNING THIS AUDIO TWEAK can (and most likely will) INCREASE your audio quality, BUT it will drain your battery slightly!
6) ENJOY Viper4Android, Viper4ATMOS, Viper4DD+, etc
You should be able to install other V4A variations versions as long as you have SELinux changed to whatever is required per the app's directions in the OP. V4A's Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12506
A Few More things...
You SHOULD get an app like bootmanager (xposed module) so you can select certain app's from loading at startup.
Hope this helps,
Swick

This resolves lag -- what about the obscene battery drain?

w0rdie said:
This resolves lag -- what about the obscene battery drain?
Click to expand...
Click to collapse
it fixed the INSANE battery drain AND insane LAG. Bottom line, it fixes both, FOR ME! (And the other 16 phones I have installed it on for my employees!) - Full disclosure, I did install it on a 17th phone, but that phone turned out to have a physical defect, so I dont really count that one, heh!
With govtuner, I can go for at least 18 hours in performance mode profile and over a DAY in battery mode profile. (You'd select the profile that you want through GovTuner in a Terminal app on phone).
But it saved my arse, big time. BEFORE govtuner, I would only get 6-8 hours battery time if LUCKY.
Now, I get a HECK of a lot more!

I've got an S7E and S7 -- I rooted and 'tuned' the E but couldn't live with the battery drain, overheating and lag (in order of severity) so I've opted to leave my S7 unmodified but welcome a viable root solution.
Going to give your steps a try on the Edge.

Also...
L-SPEED will help in MANY WAYS to either increase or decrease your battery usage, depending on the settings you use. That will CERTAINLY help a lot to decrease battery drain, too!

w0rdie said:
I've got an S7E and S7 -- I rooted and 'tuned' the E but couldn't live with the battery drain, overheating and lag (in order of severity) so I've opted to leave my S7 unmodified but welcome a viable root solution.
Going to give your steps a try on the Edge.
Click to expand...
Click to collapse
Thanks, that means a lot to me. I appreciate it! Let me know how it works.
FYI, I have mine set to performance mode and changed some of the settings in LSPEED to be even more performance enhancing than was suggested in the post / guide (link provided in that step to the settings suggested. Just scroll down to the LSPEED title). So my phone CAN run VERY hot. however, I've changed my phone to battery profile (within govtuner) and changed LSPEED settings to more battery conservation - taking a slight hit to performance - it ran cool and smooth and I did NOT notice ANY lag. Plus, my phones have close to 600 apps.
Oh, also... I would seriously suggest getting a program that'll allow you to stop certain apps from loading at start up. Forgot to add that to the directions. That's certainly helped as well!

Early read: performance seems on par with stock -- battery life isn't as solid as unmodified, but does appear to be much improved

w0rdie said:
Early read: performance seems on par with stock -- battery life isn't as solid as unmodified, but does appear to be much improved
Click to expand...
Click to collapse
Thanks for the early read - Glad the mod worked. Those developers for govtuner are amazing!
Appreciate it!
Don't forget, try other governors and then pick a profile that u wanna use. I've found interactive in battery profile to give good batt life & that same governor in performance profile to be very fast - alongside L-SPEED, of course!

Have stayed farr away from root, for lag and battery issues. Will give this a try though, thanks for putting this together!

swick1981 said:
Thanks for the early read - Glad the mod worked. Those developers for govtuner are amazing!
Appreciate it!
Don't forget, try other governors and then pick a profile that u wanna use. I've found interactive in battery profile to give good batt life & that same governor in performance profile to be very fast - alongside L-SPEED, of course!
Click to expand...
Click to collapse
Thanks for the guide sir. Heat is gone using interactive and balanced and lag is noticeably reduced. Great find. Out of curiosity, do govtuner tweaks set on reboot, or do I have to rerun and reset profile after I reboot the phone? Also would love to see what settings you use for most balanced performance under kernel auditor and govtuner.
Update: upon further review, this really really does work. For those of you who have held off rooting because of engboot lag/heat issues, rest assured this does a good enough job that it mitigates any problems I was having. I had followed all steps before trying this (flashing fixes v15, l speed, greenify, doze, amplify) but this is what did the trick. Thank you OP again

ororick said:
Thanks for the guide sir. Heat is gone using interactive and balanced and lag is noticeably reduced. Great find. Out of curiosity, do govtuner tweaks set on reboot, or do I have to rerun and reset profile after I reboot the phone? Also would love to see what settings you use for most balanced performance under kernel auditor and govtuner.
Click to expand...
Click to collapse
Govtuner SHOULD run at boot. You should only rerun the tune (or govtuner) command IF you've changed the governor OR soemthing within the kernel!
My Governor is set to "INTERACTIVE" & my GOVTUNER profile is set to "PERFORMANCE".
Here are my LSPEED settings
(Please understand that I sacrifice battery run time for performance and allows my phone to run for a little under a day!)
within the Main tweaks Option (From MAIN MENU options)
Kernel Modifications:
Kernel Tweak - Disabled
Kernel Sleepers Optimization - Enabled
Under System Tweaks
Battery Improvement - Enabled
Faster Boot - Enabled
WiFi Sleeper - disabled (you preference)
Flag Tuner - ENABLED (DEFINATLY ENABLE THIS!) - there is a better flag tuner available as a flashed tweak somewhere on XDA, but I can't remember where. However, the tweak is VERY GOOD within LSPEED. I'll update OP if I find the better one!
Assertive Display - ENABLED
UI Optimizations:
Improve Scrolling - Enabled
Liquid Smooth UI - Enabled
Debugging Options Menu:
Disable Debugging - Enabled
Disable Kernel Panic - disabled
Other Tweaks Menu:
Better In Call audio - enable
Improve image quality - enable
MISC Tweaks - disabled
CPU Tuner Option From main Menu Options
CPU TUNING MENU:
CPU Optimizer - Enabled (Might not need with govtuner running, but I've used with this enabled and hasn't cause a prob - YET... lOl)
LNET OPTIMIZER (From MAIN MENU)
LNET Tweaks Options
NET BUFFERS - BIG
RIL Tweaks - enabled
LNET OPTIMIZATIONS Options
Google DNS - Disabled (Your choice)
Faster Streaming - Enabled
Fast Dormancy - Enabled
IO Tweaks (From Main menu)
Storage IO Tweaks Options
SD Tweak -Aggressive (This sets SD CARD cache amount. I'm using a 256GB Micro SD card and the aggressive setting changes the cache to 2048kb - for me)
IO Boost - Enabled
IO Extended Queue - Enabled
Partition Remount - Enabled
Virtual Memory (From main Menu)
Memory Management Tweaks
OOM Killer - Enabled
Cache Reclaiming - DOUBLE (This option WILL drain battery faster)
Cache Allocation - Medium
RAM Manager (From main Menu)
RAM Manager Options
Ram Manager - (I change this depending on what I'm doing between Multitasking or Gaming - though I hardly EVER play games)
Seeder (Main Menu)
Seeder Options
Seeder - Aggressive (This will drain battery a little faster but has given me AMAZING performance increases!) I'd suggest you try aggressive and work your way through each option to see where it takes you and how much battery / speed you gain / lose!
Cleaner (From Main Menu)
Cache Cleaner
(You can run whatever you'd like - I'd suggest running "Clean Junk Files and wipe cache partition & dalvik cache)
Cleaner Options:
Run Cleaner On Boot - Enable (You do NOT have to set it to enabled, but I prefer to clean things up at boot)
FSTRIM (From Main Menu)
FSTrin On Boot - Enabled (Again, it's not necessary to run this, but I do to keep things clean at all times and trimmed, too!) heh
Once finished, PLEASE SAVE THESE CHANGES to you can load them and not go through all this again. Furthermore, make sure you do not disable LSPEED from running at start up! (Several people have had that problem and not realized it)!
I HOPE you're phone goes so fast it flies into the future to tell you the world is going to end! heh
Enjoy!
Swick

Govtuner did help out I used to use it when I was rooted but I still had stability issues battery did improve but still drained to fast for me. I'm back on stock
Sent from my SM-G930V using XDA-Developers mobile app

ickedmel said:
Govtuner did help out I used to use it when I was rooted but I still had stability issues battery did improve but still drained to fast for me. I'm back on stock
Sent from my SM-G930V using XDA-Developers mobile app
Click to expand...
Click to collapse
I'm sorry to hear that! Plus, that's extremely odd - did you test other governor's on all the govtuners profiles? Did you flash the v15 fix on the PF2 firmware (if you did that, it WILL cause stability issues - I can attest to that, sadly)!
I've setup on 16 S7's and they all work like a charm - no joke! I've NEVER had a phone this fast in my life, frankly!
Further, I do suggest starting from a clean install as that usually works best. PLUS, PE1 firmware seems, so far, to be the best and most stable firmware when flashing v15 fix.
I have setup on the PF2 firmware on 2 S7's, but they were not my phones, and though th owners have told me on several occasions that their phones are much faster, etc... I cannot swear to that because I do not know and have not seen them for some time. But, it did work and has helped significantly!
Anyway, I'd be happy to help you if you want... I hate to hear it didn't work for you!
Really sorry about that!
Swick

This solution is quite solid -- I do notice quite a bit of lag when the phone wakes up from sleep but it subsides quickly. Well played swick.

w0rdie said:
This solution is quite solid -- I do notice quite a bit of lag when the phone wakes up from sleep but it subsides quickly. Well played swick.
Click to expand...
Click to collapse
That's odd... You should try changing setting from within LSPEED app to change that behavior. It may not be possible depending on the profile you're using and the governor your using with govtuner, but... I know my phone has NO LAG, literally. (I'm swearing on my grandfather's gave & my 2 uncles' gaves, too) Seriously!
You may want to TRY my settings from OP - I know they will use more battery, BUT. See if that solves and and work back from there. Maybe you can find what is causing the lag when waking up, and fix it? just a suggestion...
In any case, I am glad it worked (mostly) for you. At least I know that ALL my phones are rooted and have ZERO LAG. That's all I care about. Plus, if you get a MOPHIE case for your S7 you can have WELL OVER 24 hours of battery life/run time!
BTW, the S6 mophie cases work JUST as well as the s7 mophie case - the only down side to the S6 mophie case - they do NOT have wireless charging, the S7 mophie case does! HOWEVER, the S6 case is far superior because it fully locks the phone into place. Whereas the S7 mophie case has a frame that you snap in place around the phone - the S7 mophie case provides FAR LESS "protection" because a small drop will cause the frame to pop off instantly! - Just thought I'd let you know in case you were wondering... heh
Swick
PS. LMK if you'd like me to help - tbh, I'm not sure what I can do to help, but am more than happy to try! But working back from my faster settings from within LSPEED should do the trick! LMK what happens!

swick1981 said:
Govtuner SHOULD run at boot. You should only rerun the tune (or govtuner) command IF you've changed the governor OR soemthing within the kernel!
My Governor is set to "INTERACTIVE" & my GOVTUNER profile is set to "PERFORMANCE".
Here are my LSPEED settings
(Please understand that I sacrifice battery run time for performance and allows my phone to run for a little under a day!)
within the Main tweaks Option (From MAIN MENU options)
Kernel Modifications:
Kernel Tweak - Disabled
Kernel Sleepers Optimization - Enabled
Under System Tweaks
Battery Improvement - Enabled
Faster Boot - Enabled
WiFi Sleeper - disabled (you preference)
UI Optimizations:
Improve Scrolling - Enabled
Liquid Smooth UI - Enabled
Debugging Options Menu:
Disable Debugging - Enabled
Disable Kernel Panic - disabled
Other Tweaks Menu:
Better In Call audio - enable
Improve image quality - enable
MISC Tweaks - disabled
CPU Tuner Option From main Menu Options
CPU TUNING MENU:
CPU Optimizer - Enabled (Might not need with govtuner running, but I've used with this enabled and hasn't cause a prob - YET... lOl)
LNET OPTIMIZER (From MAIN MENU)
LNET Tweaks Options
NET BUFFERS - BIG
RIL Tweaks - enabled
LNET OPTIMIZATIONS Options
Google DNS - Disabled (Your choice)
Faster Streaming - Enabled
Fast Dormancy - Enabled
IO Tweaks (From Main menu)
Storage IO Tweaks Options
SD Tweak -Aggressive (This sets SD CARD cache amount. I'm using a 256GB Micro SD card and the aggressive setting changes the cache to 2048kb - for me)
IO Boost - Enabled
IO Extended Queue - Enabled
Partition Remount - Enabled
Virtual Memory (From main Menu)
Memory Management Tweaks
OOM Killer - Enabled
Cache Reclaiming - DOUBLE (This option WILL drain battery faster)
Cache Allocation - Medium
RAM Manager (From main Menu)
RAM Manager Options
Ram Manager - (I change this depending on what I'm doing between Multitasking or Gaming - though I hardly EVER play games)
Seeder (Main Menu)
Seeder Options
Seeder - Aggressive (This will drain battery a little faster but has given me AMAZING performance increases!) I'd suggest you try aggressive and work your way through each option to see where it takes you and how much battery / speed you gain / lose!
Cleaner (From Main Menu)
Cache Cleaner
(You can run whatever you'd like - I'd suggest running "Clean Junk Files and wipe cache partition & dalvik cache)
Cleaner Options:
Run Cleaner On Boot - Enable (You do NOT have to set it to enabled, but I prefer to clean things up at boot)
FSTRIM (From Main Menu)
FSTrin On Boot - Enabled (Again, it's not necessary to run this, but I do to keep things clean at all times and trimmed, too!) heh
Once finished, PLEASE SAVE THESE CHANGES to you can load them and not go through all this again. Furthermore, make sure you do not disable LSPEED from running at start up! (Several people have had that problem and not realized it)!
I HOPE you're phone goes so fast it flies into the future to tell you the world is going to end! heh
Enjoy!
Swick
Click to expand...
Click to collapse
Awesome! What screen on time are you getting? With BT, wifi always on, location services, bunch of data apps, whether on unrooted U firmware, rooted or V firmware, I always seem to hover around 4 hours screen on time. My phone does sleep well though in all cases (90%+ deep sleep if untouched for an hour). With these settings OP, would you say your phone is now faster than stock?

davidisflash said:
Awesome! What screen on time are you getting? With BT, wifi always on, location services, bunch of data apps, whether on unrooted U firmware, rooted or V firmware, I always seem to hover around 4 hours screen on time. My phone does sleep well though in all cases (90%+ deep sleep if untouched for an hour). With these settings OP, would you say your phone is now faster than stock?
Click to expand...
Click to collapse
Hey, real quick - take a look on the OP in this thread - there are 2 settings that are missing under the kernel tweaks in my LSPEED settings! (Those settings are a big deal, too! SORRY!!!!)
I really can't answer your question because I ONLY run my BT for a few hours and my WiFi is on all the time. My screen brightness is set to auto (but I try to keep it as low as possible).
All I can say is test EACH governor (android has a LOT of governors that it supports) with govtuner's profiles and see what combination is best for YOU. It's possible that you'll get results similar to mine, where I actually got a near doubling of the battery. (Again, it was in conjunction with LSPEED & GOVTUNER and doing LOT of testing / tweaks).
As to your other question - HECK YES, my phone is FAR FASTER than stock. In fact, when I loaded a large spreadsheet (in excel) it would take about 30-40 seconds to load at best. Now, my phone loads these spreadsheets up in about 10 seconds (or less, though that's unusual)!
So, yes - it is FAR FASTER than stock, and I'm not understating things at all (nor am i exaggerating).
Sorry I couldn't be of more help... But I am EXTREMELY confident that you'll get an improvement - I just do not know how much!
Swick

swick1981 said:
Install Universal INIT.D and set the toggle to "ON" (From playstore)
Click to expand...
Click to collapse
Hi @swick, thanks for the comprehensive guide. I'm excited to try it.
The only problem I had with the steps was with Universal Init.D: it was crashing when I tried to run it. No SuperSu popup, nada. I recorded a logcat to troubleshoot.
It turns out I was using JRummy's BusyBox for Android, but after I installed BusyBox from stericson, it started working, popping up a SuperSu permissions request. Must have been some missing file or something.
Thanks again for putting this together.

When you enter su govtuner in terminal what exactly are you supposed to see? Nothing comes up when I enter it

srish2 said:
Hi @swick, thanks for the comprehensive guide. I'm excited to try it.
The only problem I had with the steps was with Universal Init.D: it was crashing when I tried to run it. No SuperSu popup, nada. I recorded a logcat to troubleshoot.
It turns out I was using JRummy's BusyBox for Android, but after I installed BusyBox from stericson, it started working, popping up a SuperSu permissions request. Must have been some missing file or something.
Thanks again for putting this together.
Click to expand...
Click to collapse
No prob, happy to help! I was bound and determined to find a fix, or make one, because of thedarn lag. Thankfully govtuner works!
On another note, I am using jrummy's busybox without trouble. you probably just needed to reinstall busybox from within the jrummy 's app again to update links? (Just a guess though)!
I'm glad its finally working for you! Make sure you test each governor & profile to see what works best for you! There are a LOT of combinations, so enjoy! heh
Swick

[MOD][N] extra features J5 2016

wellcom
NOTE : stock rom have good battrey backup and Superb performance in the game but dont have any extra features ..... so me and AF7 add extra and needed features
its only work on stock rom
With this mod you shoud get:
----------------------------------------
1. Floating messages
2. Record calls
3.Show network speed
4.Data Usage View in QuickPanel
5.s secure
6.Ultra Data Saving Mod (data compression works only with Opera Max)
7.Camera Shutter sound on/off in camera options.
8.AppLock with more options.
9.S Power Planning
10.S Clean ( to work defrost MemorySaver.apk with Titanium backup)
11.Screen record
12.Secure WiFi (works only with Opera Max, and privacy on)
13. UHQ Upscaler quick pannel toggels
14.S Bike Mod
15.Places option on keypad
16.Advanced WiFi Menu
17.Messages with more options
18.VoLteon setting (i dont think it works, you need more lines and files to work, and depends of your provider)
19. HearingAids, Enhanced LTE services, Toast SIM unlock...
18. face trusted ( need google log on)
20. multi user on QP
21.samsung NOTE
21. only LTE
downlaod :
https://mega.nz/#!e5F2GCwQ!dqaWAq72-ZRdpv9opjR6GHsrxipuuesSdDjKl7y01js
INSTRUCTIONS:
go to twrp
install zip file
flash last su or magisk root
wipe delavik/cash
than reboot ( waiting 10 min)
thanks by:
@AF7 best friend and tester
@kubura2999 for csc features 
 @MRKING0151 for help

I don't if it has but if not can you add AOD and reply to messages from the notification?

I've installed it but it doesn't pass safety net... any fixes???

RicardoArantes said:
I've installed it but it doesn't pass safety net... any fixes???
Click to expand...
Click to collapse
Flash another Magisk zip, everything is running as it should on my J510FN.

The_LLH said:
Flash another Magisk zip, everything is running as it should on my J510FN.
Click to expand...
Click to collapse
Thanks, I'll try that.
Do you know any way for the phone to run smoother?

Can anyone help me out? I add odyssey v1 with magisk and it worked, why doesn't it work with stock + this mod?

Thread closed at OP's request