Tested with BLN-L22 but should work in every Honor 6x model with emui 5
THIS WILL CHANGE YOUR DEVICE TO CHINESE VARIANT!!!
Warning: I'm not responsible if you bricked Your device,loose your warranty while rebranding and updating etc
Downlaod:HWOTA from HERE
Extract it inside local disk C: or Desktop
1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives:
update.zip
update_data_full.zip
BLN-AL20_update_full_all_cn.zip
5. Add the downloaded files to the folder "HWOTA7\Update" and rename two files same as mentioned below->
- update_data_full_public.zip to update_data_public.zip
- update_full_BLN-AL20_all_cn.zip to update_all_hw.zip
-update.zip don't rename.
6.Connect your phone to PC using fastboot and run update.bat in HWOTA 7 folder,it will ask for unlock code if your device is locked,follow instructions,Reboot to TWRP>By holding power button,when its shows yellow warning hold volume up key it will Reboot to TWRP
7.When its ask for
update from> Using the script
select >change location>BLN-AL 20
It will copy firmware and install everything automatically,just wait for your device to boot
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
8. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
Google Apps:here Requires stock recovery to install, You need to install playstore from hi app gallery or other source.
Bugs Fixing:
Unknown or invalid IMEI:Use any root file manager and go to cust/all/cn/prop/local.prop and edit local.prop change the line full network support: true to false
Sound bug or any other bugs:Flash the whole firmware again using HuRu updater it will completely install the firmware which fixes the sound bug.Follow this guide for HuRu Updater> HuRu Updater
Buy me a coffee
CREDITS: @Alexxxx1 , @vovan1982 and huge thanks to @arshilhonor6x ?
With this guide there are any bugs like no imei etc...?
Salva2000 said:
With this guide there are any bugs like no imei etc...?
Click to expand...
Click to collapse
Yes,imei bug,sound bug but both can be fixed
arshilhonor6x said:
Yes,imei bug,sound bug but both can be fixed
Click to expand...
Click to collapse
Hiw to root, is there any bootloop while flashing magisk
Khan ubaid said:
Hiw to root, is there any bootloop while flashing magisk
Click to expand...
Click to collapse
Flash magisk 16.4,not faced any bootloop with 16.4
Khan ubaid said:
Hiw to root, is there any bootloop while flashing magisk
Click to expand...
Click to collapse
Give me feedback after installing emui 8
List of Roms available in emui8: Elemental rom had fingerprint bug will be fixed in two months.
GSI roms only phhusson roms are working. I'm using this one https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
list of bugs: some gapps crashes,adb and mtp not working,headphones without mic wont detect but gsi roms will update frequently so these bugs will be gone.
final stock emui8 no bugs you can flash gapps and use it as stock emui8.
be careful with gsi roms. if you accidentally enter into e recovery while on any gsi rom you need to factory reset otherwise your internal storage wont detect.
Finally you need to factory reset after every gsi rom you have flashed and factory reset only works with stock recovery. flash this https://mega.nz/#!cbJFAIQD!qvp1KnZ0qxlg6nHDFmpM5qyZ9QUVIDe5PoZE0BQf8fs
this stock recovery for emui8 will do factory reset otherwise gsi roms wont boot.
Battery life in EMUI8 is awesome
new battery saving settings really working.
Ramesh006 said:
new battery saving settings really working.
Click to expand...
Click to collapse
Where is this setting, did you switch to low resolution mode ?
Ramesh006 said:
new battery saving settings really working.
Click to expand...
Click to collapse
U are using emui 8 now
Which TWRP are you guys using for Oreo? I am aware of the changes in partitions and the recovery_ramdisk. I tried twrp versions for other Huawei phones that are Oreo-ready but couldn't flash magisk (I think it was encryption related).
galapagos said:
Which TWRP are you guys using for Oreo? I am aware of the changes in partitions and the recovery_ramdisk. I tried twrp versions for other Huawei phones that are Oreo-ready but couldn't flash magisk (I think it was encryption related).
Click to expand...
Click to collapse
Try twrp recovery inside 'elemental rom' thread
is there a way to update the phone without pc?
yunamunchy said:
is there a way to update the phone without pc?
Click to expand...
Click to collapse
Yes but i didnt test it,flash oeminfo of bln-al20 using twrp and flash emui 8 full firmware using HuRu updater
Khan ubaid said:
Where is this setting, did you switch to low resolution mode ?
Click to expand...
Click to collapse
It was in battery section
to flash by huru updater should flash oem info first
---------- Post added at 02:34 PM ---------- Previous post was at 02:34 PM ----------
to flash by hurupdater should flash oem info first
---------- Post added at 02:34 PM ---------- Previous post was at 02:34 PM ----------
to flash by hurupdater should flash oem info first
arshilhonor6x said:
Tested with BLN-L22 but should work in every Honor 6x model with emui 5
THIS WILL CHANGE YOUR DEVICE TO CHINESE VARIANT!!!
Warning: I'm not responsible if you bricked Your device,loose your warranty while rebranding and updating etc
Downlaod:HWOTA from here https://mega.nz/#!CXRnEaAb!XYodFoS9CDqJkHx0Uv2fdFmzycCvTrexcvYzrwnjfGI
Extract it inside local disk C: or Desktop
1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3196/g1699/v147280/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...80/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...N-AL20_all_cn/update_full_BLN-AL20_all_cn.zip
5. Add the downloaded files to the folder "HWOTA7\Update" and rename two files same as mentioned below->
- update_data_full_public.zip to update_data_public.zip
- update_full_BLN-AL20_all_cn.zip to update_all_hw.zip
-update.zip don't rename.
6.Connect your phone to PC using fastboot and run update.bat in HWOTA 7 folder,it will ask for unlock code if your device is locked,follow instructions,Reboot to TWRP>By holding power button,when its shows yellow warning hold volume up key it will Reboot to TWRP
7.When its ask for
update from> Using the script
select >change location>BLN-AL 20
It will copy firmware and install everything automatically,just wait for your device to boot
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
8. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
Bugs Fixing:
Unknown or invalid IMEI:Use any root file manager and go to cust/all/cn/prop/local.prop and edit local.prop change the line full network support: true to false
Sound bug or any other bugs:Flash the whole firmware again using HuRu updater it will completely install the firmware which fixes the sound bug.Follow this guide for HuRu Updater> https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
CREDITS: @Alexxxx1 , @vovan1982 and huge thanks to @arshilhonor6x
Click to expand...
Click to collapse
Hi, I need to know how I can get back to emui 5.0 from 8.0
jamesxantt said:
Hi, I need to know how I can get back to emui 5.0 from 8.0
Click to expand...
Click to collapse
U need rollback package
yunamunchy said:
is there a way to update the phone without pc?
Click to expand...
Click to collapse
No for emui5 to emui8 you need hwota7. Huru is for changing firmwares in emui8 like al10 to al20 . so your gonna need a pc to do hwota7.
---------- Post added at 02:08 AM ---------- Previous post was at 02:04 AM ----------
jamesxantt said:
Hi, I need to know how I can get back to emui 5.0 from 8.0
Click to expand...
Click to collapse
Use hwota8 but be careful small mistake will brick your phone. My advice instead of downgrade go to openkirin.net and try los 15. Very stable os than stock and got stock hauwei camera,gapps and good battery backup.
arshilhonor6x said:
U need rollback package
Click to expand...
Click to collapse
I tried but it did not work ?
Related
Description
This toolkit is a integrated pack tool for Zenfone 5 base on SKU WW 3.24.40.87. All file is come from the original firmware. None of them modified. So it wont harm your phone. Do not change any single file inside or the script will not run.
For kitkat version go here :
http://forum.xda-developers.com/zenfone-5/general/zenfone-toolkit-kitkat-2-22-40-540-t3409045
How to run
Just extract to any folder and run Zenfone_Toolkit_3.24.40.87.exe then select what you need to do. We know almost all of selected choice do. I wont explain everything here.
Selected Tool From Menu as seen on attachment
1. Wipe Cache
2. Factory Reset
3. Flash Boot
4. Flash Recovery
5. Flash Fastboot
6. Flash Stock ROM
This is the flashable stock ROM Pre-root 3.24.40.87 with SuperSU v2.65. Its create using Zenfone System Image Creator. Backup your data first before select this tool, because the script will erase all incl your data before flash system.img
7. Root
8. Unroot
9. Unlock Bootloader
10. Relock Bootloader
11. Zenfone Rescue aka Debrick
How to use
Turn off your phone. Press and hold volume down, connect your phone via usb cable. If your phone detected as iSocUSB then release volume down. Now select this tool to run. Your phone will reboot itself and droidboot will load temporary to your phone and will fix automate.
12. Fixing Generic IMEI 004999010640000
13. Backup MicroSD
14. Flash Boretz Kernel Lollipop
This tool will flash the latest kernel 12.06.2016 from Boretz.
Credit :
1. @shakalaca aka Shaka Huang for root, unroot, unlock relock bootloader, Zenfone System Image and Zenfone Rescue.
2. @boretz for Kernel Lollipop.
3. @X AnwarMov for twrp 3.0
4. @ryanjms07 for ZenStorage
Download
Zenfone Toolkit Lollipop
New revision ZenfoneToolkit_20160719
Update New Menu
1. Update Adb Platform Tool to v1.035
2. Add Fix Serial Number in Droidboot
3. Add Install Unofficial TWRP 3.0-2.0
4. Add Drivers Installer
5. Add Xposed Installer
6. Add Uninstaller Menu
7. Update New ZenFoneRootKit_20160323 Suport All Zenfone Series.
8. Zenstorage v4 Installer
Update New System Image
1. Updating SuperSU to v2.76
2. Add ZenMotion
3. Add enable RW on MicroSD
4. Add Busybox Binary v1.242
Attention
Use this tool at your own risk.
Great! It'd be very useful! Thanks!
need assistance: twrp recovery shows message -E:/ unable to find
need assistance: twrp recovery shows message -
E: Unable to find partition size for '/recovery'
E: Unable to find partition size for '/boot'
E: Unable to find partition size for '/misc'
nilesh.chordiya said:
need assistance: twrp recovery shows message -
E: Unable to find partition size for '/recovery'
E: Unable to find partition size for '/boot'
E: Unable to find partition size for '/misc'
Click to expand...
Click to collapse
First time use twrp?
Ignore that messages, since twrp dont need to backup them.
In twrp 3.0 we backup system, data and config partition
Sent from my ASUS_T00F using XDA-Developers mobile app
paktepu said:
First time use twrp?
Ignore that messages, since twrp dont need to backup them.
In twrp 3.0 we backup system, data and config partition
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
thanks for prompt reply on my query. yes, i am first time user of custom recovery to install big rom v13.0.
im on rr marshmallow,. can i use this to revert to stock rom?
---------- Post added at 08:22 AM ---------- Previous post was at 08:18 AM ----------
please fix link,.
iel0000 said:
im on rr marshmallow,. can i use this to revert to stock rom?
---------- Post added at 08:22 AM ---------- Previous post was at 08:18 AM ----------
please fix link,.
Click to expand...
Click to collapse
Im add some extra menu and fix some script there. Link will be ready tomorrow.
Sent from my ASUS_T00F using XDA-Developers mobile app
paktepu said:
Description
This toolkit is a integrated pack tool for Zenfone 5 base on sku ww 3.24.40.87. All file is come from the original firmware. None of them modified. So it wont harm your phone. Do not change any single file inside or the script will not run.
For kitkat version go here :
http://forum.xda-developers.com/zenfone-5/general/zenfone-toolkit-kitkat-2-22-40-540-t3409045
How to run
Just extract to any folder and run Zenfone_Toolkit_3.24.40.87.bat then select what you need to do. We know almost all of selected choice do. I wont explain everything here.
Need:
1. Intel Android USB Driver
2. Asus PC Link
3. iSocUSB-Driver
4. USB Debug Enable
Selected Choice
1. Wipe Cache
2. Factory Reset
3. Flash Boot
4. Flash Recovery
5. Flash Fastboot
6. Flash Stock ROM
This is the flashable stock ROM Pre-root 3.24.40.87 with SuperSU v2.65. Backup your data first before select this tool, because the script will erase all incl your data before flash system.img
7. Root
8. Unroot
9. Unlock Bootloader
10. Relock Bootloader
11. Zenfone Rescue aka Debrick
This tool is to fix USB Logo, Droidboot and Recovery. Not like AFT or Debrick Tool, this tool will not repartition your phone. This tool is base on xfstk-dldr-documentation.
How to use
Turn off your phone. Press and hold volume down, connect your phone via usb cable. If your phone detected as iSocUSB then release volume down. Droidboot will load temporary to your phone and will flash automate boot, droidboot and recovery. This tool will not erase your data. If its succed your phone will reboot itself. Check if its ok.
12. Fixing Generic IMEI 004999010640000
Its from my thread before :
http://forum.xda-developers.com/zenfone-5/help/sim1-sim2-imei-004999010640000-t3385238
And base from this thread :
http://forum.xda-developers.com/and...00e-me372cg-stock-t2914113/page2#post61757298
I create this tool to fix generic IMEI number 0049. It will not fix null IMEI.
13. Backup MicroSD
This tool will copy everything on your MicroSD Card to backup folder.
14. Flash Boretz Kernel Lollipop
This tool will flash the latest kernel 12.06.206 from Boretz.
Credit :
1. @shakalaca aka Shaka Huang for root, unroot, unlock and relock bootloader.
2. @boretz for Kernel Lollipop.
3. @X AnwarMov for twrp 3.0
Download
Zenfone Toolkit Lollipop
https://drive.google.com/folderview?id=0B0AFmAAcGS5xSVpJeDNPdDZ6Skk
Attention
Use this tool at your own risk.
Click to expand...
Click to collapse
Will this work on ZenFone 6?
tej12345 said:
Will this work on ZenFone 6?
Click to expand...
Click to collapse
No
Sent from my ASUS_T00F using XDA Labs
waiting new rev, i really need this to fix my bootloader.
nttL said:
waiting new rev, i really need this to fix my bootloader.
Click to expand...
Click to collapse
New rev release
iel0000 said:
im on rr marshmallow,. can i use this to revert to stock rom?
---------- Post added at 08:22 AM ---------- Previous post was at 08:18 AM ----------
please fix link,.
Click to expand...
Click to collapse
Its fix now
still cannot download....
anggabastian said:
still cannot download....
Click to expand...
Click to collapse
Sorry, no longer support this.
I move to Zenfone 3 Deluxe forum if they are ready
Please update the link.
iel0000 said:
im on rr marshmallow,. can i use this to revert to stock rom?
---------- Post added at 08:22 AM ---------- Previous post was at 08:18 AM ----------
please fix link,.
Click to expand...
Click to collapse
plz fix the link of Zenfone Toolkit Lollipop 3.24.40.87 it will unavailable to download
abhishek_wood said:
plz fix the link of Zenfone Toolkit Lollipop 3.24.40.87 it will unavailable to download
Click to expand...
Click to collapse
I think nobody need this anymore, besides i have a full space on go drive. I will make another g account for this.
Sent from my ASUS_T00F using XDA-Developers mobile app
Angristan said:
Please update the link.
Click to expand...
Click to collapse
Done
Sent from my ASUS_T00F using XDA-Developers mobile app
abhishek_wood said:
plz fix the link of Zenfone Toolkit Lollipop 3.24.40.87 it will unavailable to download
Click to expand...
Click to collapse
Done
Sent from my ASUS_T00F using XDA-Developers mobile app
please provide google drive access permission.
kindly resolve the following issue to download the tool kit.
HwOTA7 + HwOTA8 for Huawei P10 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
and will be repack firmware (only HwOTA8)!!!
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA_WARSAW.zip
Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Locked Bootloader
GizmoTheGreen said:
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Click to expand...
Click to collapse
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
---------- Post added at 10:43 PM ---------- Previous post was at 10:11 PM ----------
vovan1982 said:
HwOTA for Huawei P10 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
Hello!
I need your help with the update.bat file
When I try to execute the file, it just shows a cmd screen for a couple of seconds and nothing happens
what am I possibly doing wrong?
Plus, theres no instrutions for pluggin the phone into the PC, what I being doing its plug in it on bootloader mode
I hope you can understand me, english is not my mother language.
And thank you in advance
EDIT: Forget it man, I make it work, I just copied the HWOTA directory to C: and it works
So far i just used the update firmware option and everything is working
GizmoTheGreen said:
used this to update my phone, to oreo... but no twrp works now, recovery fails to boot! so... no way to get root xD
Click to expand...
Click to collapse
Hi, of couse, on Oreo not TWRP. TWRP from Nougat does not work.
kristoff_andxp said:
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
---------- Post added at 10:43 PM ---------- Previous post was at 10:11 PM ----------
Hello!
I need your help with the update.bat file
When I try to execute the file, it just shows a cmd screen for a couple of seconds and nothing happens
what am I possibly doing wrong?
Plus, theres no instrutions for pluggin the phone into the PC, what I being doing its plug in it on bootloader mode
I hope you can understand me, english is not my mother language.
And thank you in advance
EDIT: Forget it man, I make it work, I just copied the HWOTA directory to C: and it works
So far i just used the update firmware option and everything is working
Click to expand...
Click to collapse
Yes, I can understand you. You did the right thing, way to HwOTA as short as possible.
vovan1982 said:
Hi, of couse, on Oreo not TWRP. TWRP from Nougat does not work.
Click to expand...
Click to collapse
so need to wait for twrp port... ok ^^
kristoff_andxp said:
If you read the instructions, the bootloader will be locked after the process is completed, therefore, you're gonna have to unlock it and reflash the custom recovery that you had before
Click to expand...
Click to collapse
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
GizmoTheGreen said:
so need to wait for twrp port... ok ^^
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
Click to expand...
Click to collapse
The greater question is: can be the bootloader locked after Oreo update ?
Eurofighter_ty said:
The greater question is: can be the bootloader locked after Oreo update ?
Click to expand...
Click to collapse
Don't know, I'm not going to try
My Bootloader is Unlocked after successful installation.
But why my PC says the prone is PRA-LX1 instead of WAS-LX1?
GizmoTheGreen said:
Don't know, I'm not going to try
Click to expand...
Click to collapse
Did u relocked bootloader?
Alexxxx1 said:
Did u relocked bootloader?
Click to expand...
Click to collapse
no. it did not relock bootloader automatically and I want it unlocked. also afraid of brick if I lock it with this rom.
GizmoTheGreen said:
no. it did not relock bootloader automatically and I want it unlocked. also afraid of brick if I lock it with this rom.
Click to expand...
Click to collapse
Yes, with this method bootloader stay unlock same as on p10 plus, but if you can enter in stock recovery no afraid of any brick if you relock bootloader.
Poslato sa VKY-L29 uz pomoć Tapatoka
for anyone wondering, I solved Magisk installation on oreo!
use .app extractor to get the RAMDISK image, patch it with magisk app on the phone. then use fastboot to install to ramdisk partition, like so
Code:
fastboot flash ramdisk patched_image.img
hope this helps
GizmoTheGreen said:
for anyone wondering, I solved Magisk installation on oreo!
use .app extractor to get the RAMDISK image, patch it with magisk app on the phone. then use fastboot to install to ramdisk partition, like so
Code:
fastboot flash ramdisk patched_image.img
hope this helps
Click to expand...
Click to collapse
Did you try it? Someone said he wasn't able to do it.
Jaizu said:
Did you try it? Someone said he wasn't able to do it.
Click to expand...
Click to collapse
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
GizmoTheGreen said:
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
Click to expand...
Click to collapse
So, what's the first impressions of Emui 8?
Sent from my WAS-LX1 using Tapatalk
GizmoTheGreen said:
yes I have magisk working
now that I think about it I tried earlier with the kernel image as well, there is no "boot" image.
maybe you need to do both kernel and ramdisk images seperately
either way, magisk working here, I already replaced the emojis
Click to expand...
Click to collapse
Mind sharing patched .img files? What device model are you using?
GizmoTheGreen said:
so need to wait for twrp port... ok ^^
1. it was not locked. and even if it was I can easily unlock it.
2. I flashed the recovery succesfully, it just gives an error when trying to enter it
so, need new twrp for oreo...
Click to expand...
Click to collapse
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
vovan1982 said:
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
Click to expand...
Click to collapse
Got a link?
vovan1982 said:
On P10 Lite with Oreo worked TWRP with P Smart Oreo.
Click to expand...
Click to collapse
If you mean that: http://www.mediafire.com/file/icpfjhw9eysjlao/FIGO321.img (TWRP-3.2.1-0 for Huawei P Smart)
I've not test yet if it's fully comatible, but you can enter into TWRP and seems to works.
Reboot into fastboot and enter the command:
fastboot flash recovery_ramdisk FIGO321.img
recovery_ramdisk partition in Android 8 is the Recovery
I'm not the Author, the author is wzsx150 from LR.TEAM
WZSX’s TWRP is well-known as the Chinese version of TWRP due to the language default is in Chinese. However, you can switch to English within TWRP user settings it's easily. switched. You can follow the instructions on this link to change the language to English: https://miui.blog/any-devices/lr-tea...inese-english/
Xiaomi 8's LR.Team customized version of Twrp
Automatically decrypts data, Includes root functionality, clear the power-on password, multi-function restart.
Disclaimer: I have installed it and for me it works fine. However, it is not guaranteed to work for you especially if you currently have encryption. Use at your own risk
If you need help flashing TWRP : Follow instructions here: https://miui.blog/mi-8/flash-twrp-root-mi-8/
Downloads
Latest
Version for Miui 11 Android 10/Q : https://www.androidfilehost.com/?fid...26312261636230
MD5: 2f5f2e7dc8f32b5a999828c9370b7de2
Version for Miui 10 or 11 Android 9/P : https://www.androidfilehost.com/?fid...26312261636232
MD5: 4681f9bd6367f934218da71fd528e39b
Old Versions
TWRP-3.2.3.1-FireDance-Edition (English) ( img)
TWRP 3.2.3-1208 (English) ( zip - img )
TWRP 3.2.3-1110 (English) ( zip - img )
TWRP 3.2.3-1110 ( zip - fastboot - img )
TWRP 3.2.3-0918 (zip - fastboot - img)
TWRP 3.2.3-0908 (zip - fastboot - img)
TWRP 3.2.2-0703 (zip - fastboot - img)
TWRP 3.2.2-0611 (zip - fastboot - img)
TWRP 3.2.2-0609 (zip - fastboot - img)
Changelog (Google Translated)
2018.11.10 update Contents:
1. Update the new rom that supports the official Android 9.
2. Update and optimize some functions
3. Increase the option to restart after the automatic upgrade is completed. In the twrp setting, the default is automatic restart. Uncheck the box and you can not restart. After the automatic upgrade, some operations are performed to prevent twrp from being overwritten, etc.
4. Update the built-in root to magisk 17.1, and fix the problem that the module cannot be brushed. Other features are also updated and optimized
5. After the new version of the system root, restarting the system requires manual installation of the magisk app, the official system problem, this can only be so
. 6. If Kami may need the root system or remove the dm check operation.
7. Prevent the functions covered by the official rec: root system, signature boot, remove dm check, cancel forced encryption, etc.
2018.9.8 update:
1. Support the official Android 9.0 system, including automatic decryption data
2. About data decryption, this may not be particularly stable now, sometimes need to reboot into the system and then restart Twrp can be decrypted.
If the new version of twrp is not supported, you can try to use the old version of
2018.8.6 update:
1. Update twrp 3.2.3 source code
2. Built-in magisk16.7, temporarily build this version first
3. Optimize data decryption problem, fix some problems
4 Support the new version of miui10 data decryption
5. Decrypt the plaintext display input password, easy to check whether the password input is correct
6. Update to try to repair the decryption data scheme, set the lock screen password to the machine, enter twrp need to enter the lock screen Password, otherwise you cannot temporarily decrypt data.
7. After brushing in twrp, the first time you enter twrp may restart once. This is normal. If you restart repeatedly, or you can't decrypt data, please give me feedback on Weibo.
8. Regarding data decryption, this may not be particularly stable now. Sometimes you need to reboot into the system and restart into twrp to decrypt.
If the new version of twrp is not supported, you can try to use the old version of
Thanks. I was already using the EN version you posted in the Dogsly(that may be wrong) thread.
Great job
arifqur said:
Thanks. I was already using the EN version you posted in the Dogsly(that may be wrong) thread.
Great job
Click to expand...
Click to collapse
@gulp79 is to thank for the English version
mikefallen said:
@gulp79 is to thank for the English version
Click to expand...
Click to collapse
if you want to add to op, this is the img version of TWRP-3.2.3-1110-XIAOMI8-EN-wzsx150
(with a minor modifications of prop.default, and also with chinese language, in previous version chinese was removed, btw english is set as default).
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
gulp79 said:
if you want to add to op, this is the img version of TWRP-3.2.3-1110-XIAOMI8-EN-wzsx150
(with a minor modifications of prop.default, and also with chinese language, in previous version chinese was removed, btw english is set as default).
https://mega.nz/fm/M4oDgLxA
Click to expand...
Click to collapse
that link doesn't seem to work for me, just redirects to the home page of mega
mikefallen said:
that link doesn't seem to work for me, just redirects to the home page of mega
Click to expand...
Click to collapse
try this
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
gulp79 said:
try this
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
Click to expand...
Click to collapse
yup added to OP Thanks!
Help!!!
It works for mi 8 miui 10.0.3.0 global?, i cant figure out how install the eu rom, in the twrp show me only folders encrypted :C, somebody knows how ?
Looks like you will have to format Dara partition in recovery by typing yes
So, boot the img and then flash the zip for TWRP to stick permanently?
Can't use gapps Aroma installer using twrp .. any ideas ?
could this twrp support amora installer
could this twrp support amora installer?
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
cyaneo said:
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
Click to expand...
Click to collapse
in twrp go to file manager, data, system and delete locksettings file. reboot and you're good to go again
Hi!
Help me, please!
I can't exit from recovery mode on MI8
cyaneo said:
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
Click to expand...
Click to collapse
Go into recovery mode, format internal memory.
---------- Post added at 06:24 AM ---------- Previous post was at 06:22 AM ----------
Coolesha said:
Hi!
Help me, please!
I can't exit from recovery mode on MI8
Click to expand...
Click to collapse
You need to format your device.
bahuy2003 said:
Go into recovery mode, format internal memory.
Click to expand...
Click to collapse
ok, but doesn't this delete all my settings & personal files (aka reset to default)?
Thank you!
cyaneo said:
ok, but doesn't this delete all my settings & personal files (aka reset to default)?
Thank you!
Click to expand...
Click to collapse
If you device can't reboot, you can flash eu or global rom, format again and reboot system.
bahuy2003 said:
If you device can't reboot, you can flash eu or global rom, format again and reboot system.
Click to expand...
Click to collapse
Hu? never wrote it doesn't reboot etc. - It reboots, everything seems to be OK - I "just" can't login after restore a backup....
so, again: does "format internal memory" reset my phone, delete setting or personal files? If so, how does this solve the problem? After a fresh EU ROM install, everything works fine like a new install does.
cyaneo said:
Hu? never wrote it doesn't reboot etc. - It reboots, everything seems to be OK - I "just" can't login after restore a backup....
so, again: does "format internal memory" reset my phone, delete setting or personal files? If so, how does this solve the problem? After a fresh EU ROM install, everything works fine like a new install does.
Click to expand...
Click to collapse
Flash this zip in TWRP and your login password would be deleted, which by the way gets jumbled up after a restore.
Hi All
Note: This procedure is for Windows PC only.
I can see there is a similar thread to help on rooting your device.
I created this thread it make it more easier and focussed just on rooting your device rather with additional information.
This menthod is to root your device without TWRP.
There is a detailed guide by @Freak07 which you can find here.
Prerequisite:
1. Your device bootloader is unlocked
2. You have enabled your Developer Options and enabled USB debugging (Settings > System > About phone > Software information, tap build number 7 times to enable Developer options)
3. Flash Tools, download from here and extract to your PC
4. Latest Magisk Manager which you can download from the relevant thread (search or click here)
BOOT IMAGES
Stock Boot images:
Firmware WW_16.1220.1906.174_0 >>>> Click here
Firmware WW_16.1220.1908.189_1.1.1 >>>> Click here
Patched Boot images:
Firmware WW_16.1220.1906.174_0 (patched with Magisk 19.3 stable version) >>>> Click here
Firmware WW_16.1220.1908.189_1.1.1 (patched with Magisk 19.3 stable version) >>>> Click here
Steps to Root:
1. Connect your device with USB cable
2. Go to the folder where you copied Flash Tools and double click to run cmd-here.exe
3. In the command prompt run the command adb devices, this will run the Deamon and show your device under List of devices attached. If doesn't show your device, check your device is connected and USB debugging is enabled.
4. Now run the command adb reboot bootloader to boot your device in to Fastboot mode
5. Now flash the patched boot image with the command fastboot flash boot magisk_patched.img
Restart your device with the fastboot command fastboot reboot and enjoy your ROOTED device
It works great, thanks!!
But then I installed miracast magisk module and now everytime I flash magisk patched boot, my phone is stuck on Asus logo so I have to flask stock boot to use my phone.
I think I should flash system image but when I unzip firmware from Asus site ( https://www.asus.com/Phone/ZenFone-6-ZS630KL/HelpDesk_Download/ ) on my mac,
It doesn't show any system image (or even boot image), only "compatibility" , "payload" and some other stuff.
Can you tell me what I am doing wrong?
EMJI79 said:
But then I installed miracast magisk module and now everytime I flash magisk patched boot, my phone is stuck on Asus logo so I have to flask stock boot to use my phone.
I think I should flash system image but when I unzip firmware from Asus site ( https://www.asus.com/Phone/ZenFone-6-ZS630KL/HelpDesk_Download/ ) on my mac,
It doesn't show any system image (or even boot image), only "compatibility" , "payload" and some other stuff.
Can you tell me what I am doing wrong?
Click to expand...
Click to collapse
Hi ASUS firmware for Zenfone do not have system img and instead it is the payload.bin which holds all system files. You can extract system image using python based tools.
You can remove the module if you flash TWPR and using file manger in TWRP to remove magix folder. This will remove magisk completely. Or, reset system via stock recovery. Completely switch off your device. Now, press and hold volume up button and press power button. It will help you to boot in to stock recovery. Or you can follow the guide here
If you still want to flash stock firmware, this link may help.
smohanv said:
Hi ASUS firmware for Zenfone do not have system img and instead it is the paylod.bin which holds all system files. You can extract system image using python based tools.
You can remove the module if you flash TWPR and using file manger in TWRP to remove magix folder. This will remove magisk completely. Or, reset system via stock recovery. Completely switch off your device. Now, press and hold volume up button and press power button. It will help you to boot in to stock recovery. Or you can follow the guide here
If you still want to flash stock firmware, this link may help.
Click to expand...
Click to collapse
If I just reset system via stock recovery, will I lose user data?
EMJI79 said:
If I just reset system via stock recovery, will I lose user data?
Click to expand...
Click to collapse
Yes you do. But you will not loose the files and folder in internal storage like photos etc..
You have to install all user applications again.
I would suggest you to follow the thread to flash TWRP and just remove magisk folder in TWRP file manager.
smohanv said:
Yes you do. But you will not loose the files and folder in internal storage like photos etc..
You have to install all user applications again.
I would suggest you to follow the thread to flash TWRP and just remove magisk folder in TWRP file manager.
Click to expand...
Click to collapse
I will do that.
Just another question: can I just boot in Twrp without installing it?
EMJI79 said:
I will do that.
Just another question: can I just boot in Twrp without installing it?
Click to expand...
Click to collapse
You can boot in to TWRP without permanently flashing it.
Take few cautions before you attempt to boot in to TWRP using this option,
1. Remove fingerprint in security settings (settings > Security & lock screen > Fingerprint)
2. Remove screen lock PIN in settings > security & lock screen > screen lock > select NONE here and also make sure Fingerprint is not enabled in this screen
How to boot in to TWRP:
Download TWRP from here
Use the command in Fastboot > fastboot boot twrp-3.3.1-15-ASUS_I01WD.img
Now you can use file manager in TWRP and remove magisk folder. You have to mount system folder to do so.
EMJI79 said:
I will do that.
Just another question: can I just boot in Twrp without installing it?
Click to expand...
Click to collapse
Did you try the method I explained here >> https://forum.xda-developers.com/showpost.php?p=80100285&postcount=8
smohanv said:
Did you try the method I explained here >> https://forum.xda-developers.com/showpost.php?p=80100285&postcount=8
Click to expand...
Click to collapse
I will do that now. I just came back home.
Thanks.
---------- Post added at 04:28 PM ---------- Previous post was at 03:58 PM ----------
Do you think I can this:
https://magiskroot.net/uninstall-magisk-module-twrp/
edit: it's for older versions of Magisk
Still I can't see the Magisk modules or Magisk folder in /data or /system/data , it appears empty
EMJI79 said:
I will do that now. I just came back home.
Thanks.
---------- Post added at 04:28 PM ---------- Previous post was at 03:58 PM ----------
Do you think I can this:
https://magiskroot.net/uninstall-magisk-module-twrp/
edit: it's for older versions of Magisk
Still I can't see the Magisk modules or Magisk folder in /data or /system/data , it appears empty
Click to expand...
Click to collapse
Are you able to boot in TWRP recovery as I mentioned. Please confirm.
Have you mounted system in twrp. It won't go anywhere. You should find it. I have done this several times.
Read here for some more help.
https://magiskroot.net/uninstall-magisk-module-twrp/
Sent from ASUS ZenFone 6 (2019) using Tapatalk
smohanv said:
Are you able to boot in TWRP recovery as I mentioned. Please confirm.
Have you mounted system in twrp. It won't go anywhere. You should find it. I have done this several times.
Read here for some more help.
https://magiskroot.net/uninstall-magisk-module-twrp/
Sent from ASUS ZenFone 6 (2019) using Tapatalk
Click to expand...
Click to collapse
Yes I am able to boot in TWRP and browse inside the files.
I am checking system square in TWRP mount section however I tried to mount data also and it isn't possible.
I will try the advised link later today, thanks for the help.
EMJI79 said:
Yes I am able to boot in TWRP and browse inside the files.
I am checking system square in TWRP mount section however I tried to mount data also and it isn't possible.
I will try the advised link later today, thanks for the help.
Click to expand...
Click to collapse
Yes. I did try as well. It seems like TWRP is loading in READ ONLY mode. I doubt whether you can flash the uninstall mod as well. But worth trying as you can save all your installed apps.
smohanv said:
Yes. I did try as well. It seems like TWRP is loading in READ ONLY mode. I doubt whether you can flash the uninstall mod as well. But worth trying as you can save all your installed apps.
Click to expand...
Click to collapse
Which method from the link do you advise to try first?
smohanv said:
Yes. I did try as well. It seems like TWRP is loading in READ ONLY mode. I doubt whether you can flash the uninstall mod as well. But worth trying as you can save all your installed apps.
Click to expand...
Click to collapse
Check this link and follow. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242
smohanv said:
Check this link and follow. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242
Click to expand...
Click to collapse
No luck, can't flash anything in TWRP ...
Guess I have to wait TWRP is updated.
Mauronofrio telling that one have to install 3.3.1-15 to write on data:
https://forum.xda-developers.com/ze...cial-twrp-recovery-asus-t3937844/post80108953
EMJI79 said:
Mauronofrio telling that one have to install 3.3.1-15 to write on data:
https://forum.xda-developers.com/ze...cial-twrp-recovery-asus-t3937844/post80108953
Click to expand...
Click to collapse
yes. I can see that there is an installer (magisk module) which has to be flashed in magisk in order for TWRP to write on data partition.
In your case, you cannot boot your device with rooted image as you have a module which is causing bootloop. Catch 22 sistuation.
In this situation I think you have only one option left which is resetting your device loosing all installed apps. Sorry mate. Could not help you at this time.
New Update
smohanv said:
yes. I can see that there is an installer (magisk module) which has to be flashed in magisk in order for TWRP to write on data partition.
In your case, you cannot boot your device with rooted image as you have a module which is causing bootloop. Catch 22 sistuation.
In this situation I think you have only one option left which is resetting your device loosing all installed apps. Sorry mate. Could not help you at this time.
Click to expand...
Click to collapse
Hello Smohanv,
Say I want to update to the latest Firmware that got released yesterday, and I am currently rooted via the method you introduced on the first page with firmware 16.1220.1906.174_0, how do I go about it?
If I do the Manual update, will I loose root? Or should I wait for you to release a patched one, and then do the manual update?
Thanks.
Damionix said:
Hello Smohanv,
Say I want to update to the latest Firmware that got released yesterday, and I am currently rooted via the method you introduced on the first page with firmware 16.1220.1906.174_0, how do I go about it?
If I do the Manual update, will I loose root? Or should I wait for you to release a patched one, and then do the manual update?
Thanks.
Click to expand...
Click to collapse
Yes you will loose root. Why do you go for build 171 when 189 is available now.
Official link: >>> https://www.asus.com/us/Phone/ZenFone-6-ZS630KL/HelpDesk_Download/
New build can be downloaded from here >>> Download
FIrst off many thanks to @vhercastillojr (as this thread is essentially his) and Chicken from the Vietnam telegram group for providing the RAW's/img's
********** DO THIS AT YOUR OWN RISK!!! I am not liable to any damage if you accidentally brick your device. This will void your warranty, if you had one. Also, using this method you won't be able to revert back to CN roms, lock your bootloader again and recieve OTAs, your device will be blacklisted by Asus ************
NOTE: To check your current fingerprint, download and install device info HW from the playstore. Under 'system' you'll find the current rom (CN or WW), the product id and fingerprint - they all need to match to be able to update your device later
NOTE 2: The main guide below skips early roms straight to last Android 9 for ROG II. For one user it didn't work and they had to use the previous, unedited guide which was based on 1910.35 RAW. If the below guide fails to update follow the additional guide at the end of this post.
----------
0) Download the ROG phone unlock tool and copy it on your phone and install it then run it. The phone will boot twice. DO NOT PRESS POWER TO STOP THE BOOT. It will wipe your data automatically. This will unlock your bootloader. EDIT: NEWER VERSION OF THE TOOL CAN BE FOUND here
NOTE: this will void your warranty, if you had one, with Asus, even if you re-lock your bootloader later... (Although, having bought mine as an import from China, I'm think the warranty only stands with the seller - in my case, 1 year, not Asus - but i may be wrong)
1) Download the WW International RAW rom from here
2) Extract the file on your PC. Boot the phone into fastboot mode (hold volume up then press and hold power button, Fastboot mode is the 1st screen you come across, the one with the options to Start, boot to recovery, etc...) connect to the side port and run "flashall_AFT.cmd" wait for it to finish and the phone will restart itself (it will take a number of minutes to complete, with the cmd window open all the time. If the cmd window only flashes up and closes down, then check the rest of the notes with this step).
NOTE: you need to remove or delete the original zip from the raw folder once extracted as it confuses the Flashall_AFT.cmd with the raw rom and zip having the same name. Also, it can help to extract to the root of C drive.
3) Download and install Minimal ADB and Fastboot app (windows). Install it on your PC to root of C drive
4) Download the rootww191064.img and place it in the Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot) from here
5) Run Minimal ADB and Fastboot by double clicking ''cmd-here.exe''. Switch the phone into fastboot mode (hold volume up then press and hold power button) then type "fastboot flash boot rootww191064.img" without quotation marks
NOTE: you can also check your device is recognised in fastboot mode by the pc/laptop by running ''fastboot devices'' cmd which should show your device serial
6) Reboot the phone and connect it to PC, copy and install Magisk and Root Explorer
Magisk
root explorer
-run magisk, (update if necessary) and grant access to root explorer (after opening root explorer you should be prompted by magisk to gain root access, click 'allow')
7) Open the Root Explorer App on you phone. Then from the app, select Mount R/W to R/O. Search for "/vendor/factory" folder and Edit the file content COUNTRY from CN to WW (ALL Capital). Scroll to "/system/etc/AsusTheme/themes" then delete the hidden file to enable the hidden themes.
8) Restart the Phone. You are done. Check again with device info HW that your fingerprint has indeed been successfully changed.
From here, if you want to be on latest Android 10, download version 2004.60 from here (full zip), place it in root of internal storage and reboot. That'll bring you to A10.
NOTE: For those of you that are rooted: Download the full zip, move to root of internal storage and reboot. System will detect and prompt to update, click update. Wait until it finishes but DON'T click 'restart', instead, click 'restart later'. Go to Magisk manager. Click 'install' for Magisk. Click the last option 'install to inactive slot after OTA'. Click confirm force flash. Reboot when prompted. Done - root kept intact.
Repeat the process for latest (currently 2012.65) using the same link above. Your phone should hopefully skip the other versions and be straight to latest. If not, you'll have to go through 2007.27, 2009.49 and finally to current latest 2012.65. Repeat the process mentioned above for keeping root if so desired
----------
For anyone still running early roms that 1910.64 won't flash directly to, use the same guide above but with the following corrections:
2) Follow the exact same instructions but using this 1910.35 RAW
4) Download root and stock boot img's and extract them to Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot)
5) Run Minimal ADB and Fastboot by double clicking ''cmd-here.exe''. Switch the phone into fastboot mode (hold volume up then press and hold power button) then type "fastboot flash boot rootww191035.img" without quotation marks
NOTE: you can also check your device is recognised in fastboot mode by the pc/laptop by running ''fastboot devices'' cmd which should show your device serial
After doing the ammended steps above for 1910.35, follow the rest of the guide to change fingerprint, then update to 1910.64 zip, place it in root of internal storage and reboot.
NOTE: For those of you that are rooted: Download the full zip, move to root of internal storage and reboot. System will detect and prompt to update, click update. Wait until it finishes but DON'T click 'restart', instead, click 'restart later'. Go to Magisk manager. Click 'install' for Magisk. Click the last option 'install to inactive slot after OTA'. Click confirm force flash. Reboot when prompted. Done - root kept intact.
******************* Thanks to @Barbatos19, who suggested I make video. Sorry to say I wont be, BUT several of you guys have recommended THIS VIDEO as a good reference guide... Hope it helps some others *******************
Finally(!!!), apologies that this post has become cluttered with instructions, I have tried to cater for all you and all eventualities!! Good luck
Thanks for this guide bro. Fully converted from CN to WW.
It wilk work if i have now flashed WW rom but with CN fingerprint? It was like this when i bought from GearBest
Zdrpkamil said:
It wilk work if i have now flashed WW rom but with CN fingerprint? It was like this when i bought from GearBest
Click to expand...
Click to collapse
Which rom version are running, if it's already 1910.35 then you can skip the flashing rom part. But if it's different, you need to follow each step
reg66 said:
Which rom version are running, if it's already 1910.35 then you can skip the flashing rom part. But if it's different, you need to follow each step
Click to expand...
Click to collapse
1906.19
Zdrpkamil said:
1906.19
Click to expand...
Click to collapse
You need to follow each step then
reg66 said:
You need to follow each step then
Click to expand...
Click to collapse
Ok, thanks. I'll do it at weekend and tell if works
what to do when the phone gets stuck on bootloop after flashing rootww191035.img and holding the power button doesnt work either?
Spawn_Ishan said:
what to do when the phone gets stuck on bootloop after flashing rootww191035.img and holding the power button doesnt work either?
Click to expand...
Click to collapse
Edit; didn't realise you were at this stage... Are you sure the flashing of the raw rom worked OK? Did you a cmd window open for a good 5-10 mins while the rom flashed?
Will KingRoot app work to root this phone? Don't want to have to wipe data to root.
I am pretty sure it won't, but humor me. Or is their something else out there that works?
jkeener88 said:
Will KingRoot app work to root this phone? Don't want to have to wipe data to root.
Click to expand...
Click to collapse
No idea... But im doubtful
hi bro
your link unlock tool its 190702..i can use it?
my rom ww1908.12 with finger CN
your file link name in step 4 is not same and file name is step 5..
its a same file to use?step 4 name boot&rootww and step 5 file ne to use rootww..do need to rename file step 4 to rootww?
and u have link l file to unroot 191035?
thx bro
wilsen1985 said:
hi bro
your link unlock tool its 190702..i can use it?
my rom ww1908.12 with finger CN
your file link name in step 4 is not same and file name is step 5..
its a same file to use?step 4 name boot&rootww and step 5 file ne to use rootww..do need to rename file step 4 to rootww?
and u have link l file to unroot 191035?
thx bro
Click to expand...
Click to collapse
One moment, I'll check the links... And yes, that is the only unlock tool available from asus website...
EDIT: yes, the zip file to download in step 4 needs to be extracted. it contains both the root boot img and stock img for later on when you unroot etc (both root and stock boot img's are for 1910.35). you need to place the rootww191035.img in the same folder as adb... and do the same for the stock boot.img for later use... read the instructions carefully...
reg66 said:
One moment, I'll check the links... And yes, that is the only unlock tool available from asus website...
Click to expand...
Click to collapse
i can't find link unroot 191035..
do u have thats link?
wilsen1985 said:
i can't find link unroot 191035..
do u have thats link?
Click to expand...
Click to collapse
in step 4) you download a .zip file that conatins BOTH rootww191035.img AND boot.img - the boot.img IS the stock boot for unrooting 1910.35, you need to extract both img's to adb folder on your pc.
reg66 said:
One moment, I'll check the links... And yes, that is the only unlock tool available from asus website...
EDIT: yes, the zip file to download in step 4 needs to be extracted. it contains both the root boot img and stock img for later on when you unroot etc (both root and stock boot img's are for 1910.35). you need to place the rootww191035.img in the same folder as adb... and do the same for the stock boot.img for later use... read the instructions carefully...
Click to expand...
Click to collapse
oh ok thx bro
1 question again
yesterday i download file raw ww1910.35 zip on asus website
can i use its raw file to this tutor or must download raw file in page 1?
wilsen1985 said:
oh ok thx bro
1 question again
yesterday i download file raw ww1910.35 zip on asus website
can i use its raw file to this tutor or must download raw file in page 1?
Click to expand...
Click to collapse
What you downloaded is not, I think, the raw rom, its the update zip for those who have already changed fingerprint and are simply updating... Please use the links in 1st page...
reg66 said:
What you downloaded is not, I think, the raw rom, its the update zip for those who have already changed fingerprint and are simply updating... Please use the links in 1st page...
Click to expand...
Click to collapse
oh ok bro
i download raw in page 1 n when its complete i start for flash..
hope im succes for all convert
thx bro..
wilsen1985 said:
oh ok bro
i download raw in page 1 n when its complete i start for flash..
hope im succes for all convert
thx bro..
Click to expand...
Click to collapse
Good luck, make sure you read it all and follow each step accurately
reg66 said:
Good luck, make sure you read it all and follow each step accurately
Click to expand...
Click to collapse
ok bro very thx..