KERNEL XPERIA XA1
Hello . Today I want to present kernel based on stock , but dedicated for my rom and not only !! (you can use this kernel on stock rom , but he can brick your device . On stock you can flash it on your own risk !!) .
Soon I publish my own port of Lineage os based on android 8.1 , and I publish too AOSP (AOSP is port too from nexus device) .
Whats new :
-Kernel have added new features
-Disabled boot animation
-Check ini was disabled
-Better speed of lte but soon I add patch for better signal of 2G/3G/LTE networks
-Low ram mode enabled
-Go apps support enabled
-Decrease boot time
-Fixed dalvik vm heapsize
-Disabled adb notify
-Enabled support for treble (latest updates get options for use treble on XA1 , now kernel have support later ROM get support for treble !!)
V2:
-Signal Performance
-Save Battery Without Performance Drop
-Allow Purge of Assets To Free Ram
-Smooth Video Stream
-Increase General Performance
-Support for Xperia XA1 PLUS - kernel tested work's fine only G3412 , but can to be sometimes and series speaker bug ... - Than you flash my boot img please make a backup of actual
HOW TO UPGRADE XA1 FOR CORRECT WORKING KERNEL AND OPTIMIZE FOR MY ROM :
1.DOWNLOAD ROM FOR G3112 (CIS)
2.AFTER ,,MAKE'' ROM VIA FLASHTOOL OPEN HIM VIA 7ZIP
3.OPEN META INF
4.CHANGE DEVICE TO YOUR DEVICE MODEL
Manifest-Version: 1.0
Created-By: FlashTool
version: 48.1.A.2.21
branding: Customized
cda: 1311-7593
revision: R1A
device: XXXX
cmd25: false
noerase: APPS_LOG,DIAG,QNOVO,USERDATA,CUST-RESET
XXXX - IS YOUR MODEL
5.SAVE FILE AND EXIT (NOW 7 ZIP SAVE MODIFICATIONS)
6.EXIT 7 ZIP
7.START FLASH TOOL
8.FLASH NEW ROM WITH ALL WITHOUT : USERDATA,PARTITIONS,OSV-RESTRICTION,CUST-RESET
THIS DON'T BRICK YOUR DEVICE , THIS PROCEDURE UPDATE YOUR DEVICE AND PARTITIONS TO USE MY ROM AND KERNEL !!
NOW YOU CAN USE CIS STOCK ROM WITH MY KERNEL OR INSTALL MY ROM AND MY KERNEL .
HOW IT WORKS :
STOCK ROM + MY KERNEL = NORMAL PERFORMANCE LITTLE FASTER THAN NORMAL
MY ROM + MY KERNEL = 80% MORE FASTER ROM AND PERFORMANCE OF YOUR DEVICE !!
Kernel was dedicated for xperia XA1 (all variants tested and fully working !! )
Kernel:
Android version : stock 8.0 / Lineage os 15.1 (8.1) / AOSP (8.1) / OREO 8.1 (FIRST EDITIONS OF OREO GO WITH DISABLED SOME FUNCTIONS VIA GOOGLE ,WITH PORTED SOME APPS OF SONY TO ROM)
Kernel version : 4.4.83+
Platform : 32bits/64bits
Build number : 48.1.A.2.21
Flashing is very easy because , you can flash new boot img via recovery or fastboot !!
Than you flash my kernel please make backup of actual kernel !!
Backup is for your safe not my .
DEVICES:
All Xperia XA1 - all variants .
Plus and Ultra - This variants to be available soon , Temporarily is not available .
If you download my kernel or rom please press thanks and buy me good beer
V2 you can install on stock rom !!
All links is short links , click skip ad and download from google drive img file .
Download :
CLICK HERE
V2 - CLICK HERE
reserved
MAREK10747 said:
KERNEL XPERIA XA1
Hello . Today I want to present kernel based on stock , but dedicated for my rom and not only !! .
Soon I publish my own port of Lineage os based on android 8.1 , and I publish too AOSP (AOSP is port too from nexus device) .
Whats new :
Kernel have added new features , disabled boot animation , check ini was disabled , better speed of lte but soon I add patch for better signal of 2G/3G/LTE networks .
Kernel was dedicated for xperia XA1 (all variants tested and fully working !! )
Kernel:
Android version : stock 8.0 / Lineage os 15.1 (8.1) / AOSP (8.1)
Kernel version : 4.4.83+
Platform : 32bits/64bits
Build number : 48.1.A.2.21
Flashing is very easy because , you can flash new boot img via recovery or fastboot !!
Than you flash my kernel please make backup of actual kernel !!
Backup is for your safe not my .
If you download my kernel or rom please press thanks
Download :
Download link to be added today !! Please don't delete this thread .
Click to expand...
Click to collapse
Wow nice to hear that, will it work on XA1 Plus G3412 Build. 48.1.A.2.21
Now only XA1 . Plus and ultra to be soon !! . AOSP to be first release , but now i test bug's on actual AOSP based on stock
Treble on AOSP . This is only on my rom , but recovery have problem with restore and after restore my rom via recovery wifi don't working correct .
New ROM based on stock Kernel to be soon .
Will you make a video to show us how to install this safetly? , because 1 Month ago i tried to install a ROM on my XA1 and i totaly bricked, but was repaired in warranty,and i don't want again to happen.
AlinPletea said:
Will you make a video to show us how to install this safetly? , because 1 Month ago i tried to install a ROM on my XA1 and i totaly bricked, but was repaired in warranty,and i don't want again to happen.
Click to expand...
Click to collapse
Via Fastboot
Fastboot flash boot boot-v2.img
That's all . You don't need more . Fastboot is very safe and you can install boot img via fastboot .
MAREK10747 said:
Via Fastboot
Fastboot flash boot boot-v2.img
That's all . You don't need more . Fastboot is very safe and you can install boot img via fastboot .
Click to expand...
Click to collapse
But I must to have rooted phone,unloock bootloader,instaled custom rom or I just to use fastboot on the curent Android Oreo?
AlinPletea said:
But I must to have rooted phone,unloock bootloader,instaled custom rom or I just to use fastboot on the curent Android Oreo?
Click to expand...
Click to collapse
You should have the bootloader unlocked, so you can use the fastboot to flash this kernel. Just it.
boyrock said:
You should have the bootloader unlocked, so you can use the fastboot to flash this kernel. Just it.
Click to expand...
Click to collapse
check your link is for v2 file
Link for V2 is working correct . Link is shorted because is better . I have statistics how many users download my kernel or rom
this didn't work for me got stuck in boot loop
teamtatty11 said:
this didn't work for me got stuck in boot loop
Click to expand...
Click to collapse
First one hour can stay on sony logo , but later all will be work correct and faster . Your rom must to be the same as kernel . What is your model ????
it doesn't stick on the sony logo though it keeps restarting and not progressing any further , i am using xa1 g3121 i had stock rom so should of worked fine i think ? . Any way to restore twrp as i used a different recovery.img before and now i can't use twrp either lol
teamtatty11 said:
it doesn't stick on the sony logo though it keeps restarting and not progressing any further , i am using xa1 g3121 i had stock rom so should of worked fine i think ? . Any way to restore twrp as i used a different recovery.img before and now i can't use twrp either lol
Click to expand...
Click to collapse
Soo TWRP at this moment don't working . If you have stock rom in your G3121 (i have too G3121 but reworked to G3112) , you must upgrade your device , not only rom, bootloader, software etc. You must upgrade all ... next you restore rom and kernel . I add soon medium rom and know how about upgrade device .
OK I keep looking see for updates will you be able to get recovery working with your kernel and rom? for now I rolled back to nougat and managed to get rooted with twrp again. Frustrating there seems to be no way to get this to work on oreo though. The firmware I have now makes camera pretty rubbish as autofocus doesn't seem to work.
teamtatty11 said:
OK I keep looking see for updates will you be able to get recovery working with your kernel and rom? for now I rolled back to nougat and managed to get rooted with twrp again. Frustrating there seems to be no way to get this to work on oreo though. The firmware I have now makes camera pretty rubbish as autofocus doesn't seem to work.
Click to expand...
Click to collapse
In next releases I add recovery working fully with kernel . At this moment re-work your phone without some partitions to G3112 , and use my oreo with kernel in last version (v5 - v5 i upload today) with working autofocus and other nice functions .
How do I rework to a different model? I'm not sure how to do that
With the same method . I wrote how to in post . Important is the same model not other !! If you have xa1 you can rework to xa1 too , not to xa1 plus , ultra etc.
Related
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Change UBOOT to match device build (included the the archive)
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- Busybox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @Hyperion70 (Original thread)
- @Sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- http://d-h.st/KNvT
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- http://d-h.st/4g9q
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2015-03-08
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Looking forward for ur new project sir
good job sir remzej, keep up the good work
Many Thanks Sir remzej, Hoping for a Kitkat Colossus... :fingers-crossed:
Thanks you so much sir Rem zej
thanks sir for the great and hard work on our device
Nice work bro, thanks for making good ROM for our devices, downloading it.
Sir Remz,
do you have a mirror for this link? like mediafire? i can't download it here, thanks a lot... more power
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Sir @remzej thnx for the update..
---------- Post added at 09:36 AM ---------- Previous post was at 09:35 AM ----------
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Sir @remzej thnx for the update..
Thank you Sir Rem Zej...!!!
I am flashing it now and will keep u updated with any lag or issues...:good:
Super Fine Works...!!!
Flashed an hour ago...
This rom is rocking my Xolo Q1000... I Bow to your work Sir RemZej...:good::victory:
Working superfine just like your previous rom PureXperia Z2 v4.3.7a...
Gonna enjoy this KITKAT you brought us (Ofcourse Kitkat ROM) until your next release....Thank you Again Dude...:good:
---------- Post added at 05:56 PM ---------- Previous post was at 05:23 PM ----------
Sir can i flash PurePerformance X v1.4 to this rom?
Please guide
Till now known issues...
Proximity sensor malfunctions during calls...
HELP
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
cygnis said:
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
Click to expand...
Click to collapse
Bro flash the Stock JB firmware using sp tools...then it will be fine just like before..
cygnis said:
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
Click to expand...
Click to collapse
Can you give me the link you downloaded and flashed to your phone? I think you flash the bq Aquaris 5 HD firmware.
abhipanthi said:
Proximity sensor malfunctions during calls...
Click to expand...
Click to collapse
My proximity sensors works well during calls bro.
everytime i flash this, using spftool on first boot i have baseband and IMEI, but the next time i restart my phone i lost my baseband and IMEI, tried all procedures in restoring nvram nothing works
please sir @remzej help
TheCardinal said:
everytime i flash this, using spftool on first boot i have baseband and IMEI, but the next time i restart my phone i lost my baseband and IMEI, tried all procedures in restoring nvram nothing works
please sir @remzej help
Click to expand...
Click to collapse
Be sure to backup your previous IMEI/NVRAM so you can restore it using MTK Droid Tools.
abhipanthi said:
Flashed an hour ago...
This rom is rocking my Xolo Q1000... I Bow to your work Sir RemZej...:good::victory:
Working superfine just like your previous rom PureXperia Z2 v4.3.7a...
Gonna enjoy this KITKAT you brought us (Ofcourse Kitkat ROM) until your next release....Thank you Again Dude...:good:
Click to expand...
Click to collapse
Please sir, I get an error message when flashing the Unofficial AOSP via so flastool, after loading scatter file and clicking on firmware upgrade, the error says " please make sure all necessary image file are checked to be downnloaded for "firmware upgrade"", please sir how did you pass through firmware upgrade when all files are not selected in scatter file?
Almost after an year of black patch problem in playstore and various other apps are fixed... Its a delight to use your app.. Thanks a lot.
TWRP for Huawei P10 Lite
Working
Code:
[CENTER]* Touchscreen
* Adb
* Backup
* Wipe
* File manager
* MTP
[/CENTER]
Not Working
Code:
[CENTER]You tell me
[/CENTER]
Installation
Code:
[CENTER]* put you phone in fastboot mode and type
"fastboot flash recovery_ramdisk <grab_here_the_img>"
* reboot
[/CENTER]
Download
Code:
[CENTER][URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P10%20Lite/Pie/TWRP/"]TWRP[/URL]
[/CENTER]
Credits:
@Pretoriano80
@haky 86
@OldDroid
@DarkDroidDev
Please support my work, it's very important! Thanks
DONATIONS
Regards !
Reserved
sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!
Great .. after testing on WAS-LX1A
i dunno why you're telling that mtp/backups doesn't work !
For me Backups work and internal storage / SD shown on windows normally
*Edit
Can't copy files
Thanks for your precious work .
-CALIBAN666- said:
sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!
Click to expand...
Click to collapse
I've installed RR and Bootleggers ROM's on P8 Lite 2017 and it works. All ROM's and Recoveries for hi6250 based devices (Kirin 655, 658, 659) will work on each other.
Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?
GizmoTheGreen said:
Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?
Click to expand...
Click to collapse
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.
NeoPreacher said:
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.
Click to expand...
Click to collapse
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;
GizmoTheGreen said:
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;
Click to expand...
Click to collapse
yeah, this is going to happen soon !
@DarkJoker360
How could I know if my device is hi6250 or warsaw?
chiduja said:
@DarkJoker360
How could I know if my device is hi6250 or warsaw?
Click to expand...
Click to collapse
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.
NeoPreacher said:
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.
Click to expand...
Click to collapse
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.
chiduja said:
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.
Click to expand...
Click to collapse
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.
NeoPreacher said:
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.
Click to expand...
Click to collapse
The first time that I tried to do the flashing I had to put my patron, but I've never did the decrypt, It's ****ty I tried a lot of "Solutions" but It doesn't worked.
ok alright the problembis that i tried to use "warsaw" codename instead of "hi6250" but it is not working for some reason, it is a flashing issue, and probably i have to revert my changes...
EDIT: before reverting my changes I wanted to try with LineageOS 16.0
Hi
Is there a prerequisite to use this recovery, I'm still using twrp 3.1.1-2 made by KingofMezi so still emui 5.0 but that recovery doesn't allow data backup because of the encryption. So I tried to flash yours it was ok in the command window but when I try to boot in recovery I get an error. I tried flashing again, downloading again and flashing but still doesn't work any idea?
I didn't want to upgrade the rom without a proper backup but none of the recoveries have been working.
Hi! Does someone try to install on a p20 lite?
@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0
diy_solomun said:
@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0
Click to expand...
Click to collapse
I asked myself the same question and tried to flash twrp on android 7.0 but it didn't work. I tried to upgrade to android 8 via erecovery but it failed. So i managed to upgrade it to B366 Emui 8 with dload (https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946) but i still could not flash twrp. So i entered erecovery mode again (press power, volume up & down for a few seconds) and with android 8 i could recover it to the official 8.0.0.376. After this step the flashing of twrp was finally successful. Thanks to darkjoker!!
New TWRP update is up !
Changelog
Code:
[CENTER]* Synced with latest TWRP source code
* FIxed flashing errors[/CENTER]
DONATIONS
Check OP for more info and download !
This is a custom recovery flashable pure stock firmware. It is based on the A.07 ozip which was released as RMX1901EX_11_OTA_0070_all_6m8Kht2yFPh5.ozip on official realme website. Until kernel source is completed, i'll keep working on it.
Prerequisites
Unlocked bootloader
Custom recovery installed (TWRP/PBRP/Orange Fox)
Recommended:
TWRP Here
PBRP : Here
Instructions
Dirty Flash:
1. Download
2. Reboot to recovery
3. Select install & choose the zip
4. Swipe to flash
5. Reboot
Clean Flash:
1. Download
2. Reboot to recovery
3. Wipe all (cache, dalvik-cache, system, data, internal storage)
4. Select install & choose the zip
5. Swipe to flash
6. Format data
7. Reboot
Recommended: Clean Flash
Features
For now, it's pure stock. Nothing fancy here.
Just a life saver for whom who messed with system/vendor and have no backup.
Bugs
Clean Flash:
1. Nothing, you tell me.
2. Didn't tested OTG, i don't have one.
Dirty Flash:
1. Maybe it is going to inherit the bugs you have currently, again maybe it could fix them (i.e i dirty flashed when the google/fb/twitter sign in are crashing with blank screen and it fixed that)
2. MTP didn't let linux to access the files though it was showing all.
3. You report me yours.
Stock Firmware Info
Build Number: RMX1901EX_11_A.07
Security Patch: August 5, 2019
To Do
1. remove bloatwares.
2. make it a very minimal zip.
3. another variant with pre root.
4. any other good things if i forgot to mention.
Note: I don't have broadband bandwidth to frequently update this. I'll update once it's debloated or on some major changes.
Screenshots
I forgot to take screenshots because i was recording. Again it's 2 GB of recording and compressing to upload to youtube tomorrow. Though i have some pictures from other device. You can find those in screenshots section.
Downloads
Google Drive
Support Development
If you are capable, you should support development. I have the device in hand, have a good pc only thing missing is the bandwidth. I use mobile internet & have to do recharge for every upload or download. If you are willing to support, below is my address.
Google Pay (UPI): [email protected]
See you in future update.
XDA:DevDB Information
Recovery Flashable Stock ROM For Realme X, ROM for the Realme X
Contributors
chankruze
Source Code: https://www.realme.com/in/support/software-update
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery
Based On: RMX1901EX_11_A.07
Version Information
Status: Stable
Current Stable Version: 0.0.2
Stable Release Date: 2019-09-29
Created 2019-09-28
Last Updated 2019-09-29
Can China variant flash this? Thx
is everything working fine? volte, camera, fingerprint?
At last have been asking Ajit for long time xD
nickyip123 said:
Can China variant flash this? Thx
Click to expand...
Click to collapse
Which firmware you use ?
If you use official firmware from here, then it should work.
vikasjangid said:
is everything working fine? volte, camera, fingerprint?
Click to expand...
Click to collapse
Yes, Camere (both front and back), fingerprint and VoLTE.
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
can i flash into my china realme x, i am running RMX1901CN_A17 version.
Its Just the same old color OS.
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
indroider said:
At last have been asking Ajit for long time xD
Click to expand...
Click to collapse
what?
About this flashable a07 zip .. Remember in group.. Raunaq ..?
@4j17h
I asked u about making this zip few weeks ago
Does jio volte work on Indian variant?
ghostEye said:
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
Click to expand...
Click to collapse
The title says stock os ,
The features says stock os nothing fancy. You got exactly what is said. Nothing is misleading here.
---------- Post added at 07:41 PM ---------- Previous post was at 07:35 PM ----------
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
it is color os as described clearly.
indroider said:
About this flashable a07 zip .. Remember in group.. Raunaq ..?
@4j17h
I asked u about making this zip few weeks ago
Click to expand...
Click to collapse
ahha Raunaq yes, I remember you.
Can we flash it on oppo k3 ?
Oppo k3 have the same hardware as realme X just the camera is 16mp ( same sensor as realme 3 pro), so can we flash this rom and change the camera app ?
Hello, on chinese model I receive error 7 (error patching system image), can you help me?
Hey
I am new to this segment
Please explain, if I wipe my internal storage also, from where will I install the custom rom?
Isn't the custom rom should be kept in the internal storage before installing?
phone is stuck in bootloop.
my phone is stuck on realme logo and reboot to recovery what should i do now?i am not able to boot my phone even with other roms like aosp. please help!!
Please make it flashable in Chinese variant too.thanks in advance
How to root this rom? What magisk do you use?
djozgandoz said:
How to root this rom? What magisk do you use?
Click to expand...
Click to collapse
Note:- Rooting stock rom with magisk will only work in core only mode. Hence no modules are going to be loaded.
Both 19.4 & 20.0 working. Flash the zip from recovery mode.
Project Treble for F8131/2 [Android 10]ReadMe
Hello, everyone, I'm Sjll. Tone family(Xperia msm8996 devices) will stay at kernel 4.9 for Android 10. Our treble support for Android 10 has been released. There are some differences between Treble Pie, you need to know that:
1. GSI should be A/B ARM64. NOT A only as Pie.
2. TWRP should use a new version for Android 10.
3. Never flash software binaries from SODP, it has been included in vendor.img
I am not responsible for bricked devices, dead SD cards
Required Files
Treble Files::
AndroidFileHost: Download Link
TWRP for Android 10.0::
Download Link
How to flash:
1. Download Treble Files and extract it.
2.
Code:
fastboot flash boot boot.img
fastboot flash oem vendor.img
fastboot flash system <Path of GSI.img>
3.Flash Twrp and other MODs.
4.Boot and enjoy
For F8132:
Flash a dual patch in twrp: You can download it from here.
For Devs:
See @local__hero's post: Link
Update and bugs:
V2.10:
Update to android-10.0.0-R31.
V1.96:
Update: Minimum brightness fixed.
V1.90:
Update: Rotation is fixed.
V1.86:
Update: Hotspot is fixed.
Bugs: Rotation is wrong.
V1.0:
Bugs: Hotspot is broken.
XDA:DevDB Information
Treble, ROM for the Sony Xperia X Performance
Source Codes
Link
Contributors
Sjll
ROM OS Version: 10.0
ROM Kernel: Linux 4.x
Paypal
I am very happy to receive your donation.
Version Information
Status: Beta
Created 2020-01-25
Last Updated 2020-03-18
Reserved
Reserved
hi sjjll ... thanks a lot .. the rom is very good and nice to use ... but this treble project doesn't support erfan GSi like your AOnly treble project ... almost all erfan ported ROMs that can boting the AOnly treble project can't boot at this treble project .. is there a solution ..? Thank you very much
edy sunanto said:
hi sjjll ... thanks a lot .. the rom is very good and nice to use ... but this treble project doesn't support erfan GSi like your AOnly treble project ... almost all erfan ported ROMs that can boting the AOnly treble project can't boot at this treble project .. is there a solution ..? Thank you very much
Click to expand...
Click to collapse
Hello, I think you'd better ask the GSI devs for help.
ok ... thanks a lot ... very good project ... bluetooth can't be connected in my device
Finally new treble project.. Thanks sjll.. Very appreciate it!
hi! i have a problem, my phone dont start, i try few gsi's ( AB arm64 format) and no one dont start, only trying finish bootanimations, can you help me? I have a f8132, and trying flash your fix for dual, but with it or whithout - dont work..
Hello.. Which gsi you were trying to use?
This vendor based on aosp pure gsi.. This will compatible with phhuson's gsi,expressluke's gsi,..you can try Pixel Experience by expressluke latest build.. Its already tested and booted.. Havoc os 3.1 Expressluke also working fine with this sjll's vendor..
Fhcker90 said:
Hello.. Which gsi you were trying to use?
This vendor based on aosp pure gsi.. This will compatible with phhuson's gsi,expressluke's gsi,..you can try Pixel Experience by expressluke latest build.. Its already tested and booted.. Havoc os 3.1 Expressluke also working fine with this sjll's vendor..
Click to expand...
Click to collapse
yes this treble project works well on havoc 3.1 expressluke .. i've tried it .. cooler and feels lighter ..
Thank's to sjll
Z3r0.v said:
hi! i have a problem, my phone dont start, i try few gsi's ( AB arm64 format) and no one dont start, only trying finish bootanimations, can you help me? I have a f8132, and trying flash your fix for dual, but with it or whithout - dont work..
Click to expand...
Click to collapse
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Sjll said:
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Click to expand...
Click to collapse
I trying lineage from you, trying havoc 3.1 expressluke and nothing
On lineage bootanimation dont start, on havoc problem with bootloop, idk how i cat solved this problem..
Sjll said:
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Click to expand...
Click to collapse
f8132. The patch for dual sim does not work. in single SIM card mode - it doesn’t work with all operators, I live in Kazakhstan - the beeline and the asset work without problems, Altel and Body 2 do not work. Wi-Fi also turns off after 10 minutes of use. is there any way to solve the communication problem? I liked everything, but for work I need two sims - Beeline and Altel. And it’s not convenient to carry two phones with you.
DAC doesn't work
what is the difference between v1 and v2?
OTG does not work
Cannot get this to work. Installing latest Oreo stock rom via flashtool. Booting it once. Then I put the device into fastboot mode, flashing everything exactly as described. I have tried several GSIs (PixelExperience, Lineage, HavocOS 3.1). Of course arm64 AB. When I reboot, I always end in a boot loop after the boot logo. When I boot into TWRP recovery, I see error messages like "cannot mount /data and unable to find crypto footer. Failed to mount /data…" and so on. But formatting /data in TWRP does not help: When I reboot afterwards it is just the same. Boot logo, reboot, boot logo, reboot.... forever.
Am I missing something? Do I have to disable encryption or soemthing like that? Thanks for any hints.
atlantix1 said:
Cannot get this to work. Installing latest Oreo stock rom via flashtool. Booting it once. Then I put the device into fastboot mode, flashing everything exactly as described. I have tried several GSIs (PixelExperience, Lineage, HavocOS 3.1). Of course arm64 AB. When I reboot, I always end in a boot loop after the boot logo. When I boot into TWRP recovery, I see error messages like "cannot mount /data and unable to find crypto footer. Failed to mount /data…" and so on. But formatting /data in TWRP does not help: When I reboot afterwards it is just the same. Boot logo, reboot, boot logo, reboot.... forever.
Am I missing something? Do I have to disable encryption or soemthing like that? Thanks for any hints.
Click to expand...
Click to collapse
After flashing stock and booting it once. Make sure to wipe everything except internal storage and SD and then flash the files. Also, have you tried flashing trough a PC?
Some random said:
After flashing stock and booting it once. Make sure to wipe everything except internal storage and SD and then flash the files. Also, have you tried flashing trough a PC?
Click to expand...
Click to collapse
Okay, I now also wiped everything *before* flashing the treble Images. But the result is the same. I flash via PC and the current version of fastboot. I have also tried now version 1.96 of the treble Images (tried 2 before) with no luck. Anyway, thanks for the advice.
atlantix1 said:
Okay, I now also wiped everything *before* flashing the treble Images. But the result is the same. I flash via PC and the current version of fastboot. I have also tried now version 1.96 of the treble Images (tried 2 before) with no luck. Anyway, thanks for the advice.
Click to expand...
Click to collapse
Hmmmmmmmm.
Sad
Sadly, thats all that comes to mind... What Rom Were you trying to install? (GSI)
I have installed on Oneplus 7T (using on latest OOS 11.0.0.2 Global rom) . Device booted , sound , wifi , camera (both) , bluetooth are working . Only problem that I see mobile is detected but not working . Overall running very well and smooth .
Breaking: Android 12 Beta GSI goes live ahead of Google I/O 2021
The Android 12 Beta 1 GSI packages are already available for download from Google's server. Go grab then now!
www.xda-developers.com
Thats Nice Can Post Some Screenshots and pics
intana said:
I have installed on Oneplus 7T (using on latest OOS 11.0.0.2 Global rom) . Device booted , sound , wifi , camera (both) , bluetooth are working . Only problem that I see mobile is detected but not working . Overall running very well and smooth .
Breaking: Android 12 Beta GSI goes live ahead of Google I/O 2021
The Android 12 Beta 1 GSI packages are already available for download from Google's server. Go grab then now!
www.xda-developers.com
Click to expand...
Click to collapse
Do you have an unlocked bootloader?
Also, did you do it from developer settings, or via fastboot?
Gave it a try this morning, but I get into kernel crash dump when I click restart.
Akhilesh Das K said:
Thats Nice Can Post Some Screenshots and pics
Click to expand...
Click to collapse
Added some screenshots . Not so impressive . I couldn't find how to change icons square to circle
morphvale said:
Do you have an unlocked bootloader?
Also, did you do it from developer settings, or via fastboot?
Gave it a try this morning, but I get into kernel crash dump when I click restart.
Click to expand...
Click to collapse
Bootloader is unlocked (always for custom roms ) . Installed using regular fastboot commands .No crush dump when I click restart .
Installed OOS 11.0.0.2 (Global) (from extracted payload.bin using fastboot)
fastboot reboot fastboot
fastboot flash system system.img
fastboot -w
fastboot reboot
how did you get google apps? I flashed my tablet (Galaxy Tab S5e) with the links here https://www.xda-developers.com/android-12-beta-gsi/ and they have no gapps
EDIT just saw ones say GMS and the others don't XD
intana said:
Added some screenshots . Not so impressive . I couldn't find how to change icons square to circle
Click to expand...
Click to collapse
Only Pixel devices would receive Material You Overhaul at the moment
we might have for the full release
intana said:
I have installed on Oneplus 7T (using on latest OOS 11.0.0.2 Global rom) . Device booted , sound , wifi , camera (both) , bluetooth are working . Only problem that I see mobile is detected but not working . Overall running very well and smooth .
Breaking: Android 12 Beta GSI goes live ahead of Google I/O 2021
The Android 12 Beta 1 GSI packages are already available for download from Google's server. Go grab then now!
www.xda-developers.com
Click to expand...
Click to collapse
what bugs are you facing now
fp?
screen padding ?
alert sider?
tomatoketchup said:
how did you get google apps? I flashed my tablet (Galaxy Tab S5e) with the links here https://www.xda-developers.com/android-12-beta-gsi/ and they have no gapps
EDIT just saw ones say GMS and the others don't XD
Click to expand...
Click to collapse
There are two different images on GSI download page . One is pure aosp other is aosp+GMS . I installed both of them and both worked . SS's from aosp+GMS . Google apps already included .
Akhilesh Das K said:
what bugs are you facing now
fp?
screen padding ?
alert sider?
Click to expand...
Click to collapse
Phone app force closed . Sims detected but mobile is not working (data+phone call) .
No FP option in security .
No Alert slider option (Alert Slider is OP's specific feature) .
Wifi is ok .
Camera is ok .
Sound is ok .
Bluetooth is ok .
No screen padding issues.
intana said:
There are two different images on GSI download page . One is pure aosp other is aosp+GMS . I installed both of them and both worked . SS's from aosp+GMS . Google apps already included .
Click to expand...
Click to collapse
yepppp that's what I meant by my edit, I found that out. thanks nevertheless!!!
Akhilesh Das K said:
Only Pixel devices would receive Material You Overhaul at the moment
we might have for the full release
Click to expand...
Click to collapse
oh really?! that's what made me jump
still the UI changes that trickled to AOSP are very welcomed. I love the new ripple effect
any suggestion for launcher tho? closest to pixel
intana said:
Added some screenshots . Not so impressive . I couldn't find how to change icons square to circle
Click to expand...
Click to collapse
you can change the shapes to squircle with
Code:
adb shell cmd overlay enable com.android.theme.icon.squircle
just replace squircle with circle
tomatoketchup said:
you can change the shapes to squircle with
Code:
adb shell cmd overlay enable com.android.theme.icon.squircle
just replace squircle with circle
Click to expand...
Click to collapse
Thanks for the trick . I will try it .
Vbmeta? May help ril
HueyT said:
Vbmeta? May help ril
Click to expand...
Click to collapse
I used stock OOS's vbmeta . I want to try DSU loading . May be it can work with DSU .
Once ril works for gsi, then we can expand our custom ROM choices
intana said:
Bootloader is unlocked (always for custom roms ) . Installed using regular fastboot commands .No crush dump when I click restart .
Installed OOS 11.0.0.2 (Global) (from extracted payload.bin using fastboot)
fastboot reboot fastboot
fastboot flash system system.img
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
I see you are able to boot a GSI. On the latest Android 12 beta 5, 7t shows black screen. Do you have any idea how to fix this?
murimoney said:
I see you are able to boot a GSI. On the latest Android 12 beta 5, 7t shows black screen. Do you have any idea how to fix this?
Click to expand...
Click to collapse
I have just installed nippon Android 12 gsi for pixel 5a . It is almost running most of the things . Radio , Wifi and screen are running very well . Deserve to try it if you didn't . . MOst probably other nippn gsi's for pixel devices (3,4,5,5a) will work on OP7T . I have used latest stock OOS11 11.0..3.1 as a base .
Nippon GSI Updates - Browse /Pixel - Pixel5a_Beta5 - NP3WNG5PSR at SourceForge.net
GSI Porting Project using Erfan's GSIs tool
sourceforge.net
intana said:
I have just installed nippon Android 12 gsi for pixel 5a . It is almost running most of the things . Radio , Wifi and screen are running very well . Deserve to try it if you didn't . . MOst probably other nippn gsi's for pixel devices (3,4,5,5a) will work on OP7T . I have used latest stock OOS11 11.0..3.1 as a base .
https://sourceforge.net/projects/nippongsi/files/Pixel - Pixel5a_Beta5 - NP3WNG5PS
Click to expand...
Click to collapse
Thanks. I installed Nippon GSI and everything you mentioned works except voip calls like Whatsapp and telegram. I get tiny chipmunk Voice from the other end of the call. Experienced this?