Develop Bugs

twrp problem

Hi anyone can help me. Before i restart my device it automatically boots in bootloader mode. I manage to fix it via fastboot command "fastboot oem fb_mode_clear"
But after that my problem now is when i restart my device it boots on twrp recovery. When i reboot system it also goes back to twrp mode. What is this problem? Any fix for this? Thanks everyone.

Kdx10 said:
Hi anyone can help me. Before i restart my device it automatically boots in bootloader mode. I manage to fix it via fastboot command "fastboot oem fb_mode_clear"
But after that my problem now is when i restart my device it boots on twrp recovery. When i reboot system it also goes back to twrp mode. What is this problem? Any fix for this? Thanks everyone.
Click to expand...
Click to collapse
try hold power & -volume when logo appear hold again to buttons for 10 sec then check

hamad94 said:
try hold power & -volume when logo appear hold again to buttons for 10 sec then check
Click to expand...
Click to collapse
Tried it but it wot fix. Anyways thanks for reaching up bro

What version of TWRP are you using?
If you are on the latest one, try the version before.
https://www.androidfilehost.com/?w=files&flid=126925

Jimi Mack said:
What version of TWRP are you using?
If you are on the latest one, try the version before.
https://www.androidfilehost.com/?w=files&flid=126925
Click to expand...
Click to collapse
I have the latest v3.1.1-0
How can i flash the old one?
Edit. Tried it sir but no success :angel:

Kdx10 said:
I have the latest v3.1.1-0
How can i flash the old one?
Edit. Tried it sir but no success :angel:
Click to expand...
Click to collapse
To flash in TWRP you need to flash it as an image, the option is in there. It will allow you to flash an older or newer version when with in TWRP.

Jimi Mack said:
To flash in TWRP you need to flash it as an image, the option is in there. It will allow you to flash an older or newer version when with in TWRP.
Click to expand...
Click to collapse
Yes sir tried it but still not solved. Now i lost my hope in recovering my device :crying:

Kdx10 said:
Yes sir tried it but still not solved. Now i lost my hope in recovering my device :crying:
Click to expand...
Click to collapse
Just to double check, you have a rom installed right, you did not accidentally wipe that?

Jimi Mack said:
Just to double check, you have a rom installed right, you did not accidentally wipe that?
Click to expand...
Click to collapse
Yes sir. I have 4 different roms in my sd card. The aex, xperience, crdroid and aokp. Im in aex rom before everything is smooth no error when restarting. Until then i decided to try the aokp rom 05/21 nightly build, and after that i flash also a modified boot logo to get rid of the unlock bootloader warning iflash it using fastboot commamd but when i power it on and set up the aokp rom everything goes well but then i need to restart my phone then the problem now is appearing. It directly boot in twrp recovery.

Moto G5 automatically boots into TWRP

Hey guys, hello there. I need a little help over here.
The other day I made the mistake to install an OTA on my rooted Moto G5 (dual SIM). I had the stock image, TWRP & unlocked bootloader. Of course it failed to install the OTA, but the weird thing is that it always boots to TWRP recovery. No matter if I choose to reboot completely or to boot to system from the TWRP reboot menu, it always goes back to TWRP.
Tried a few things, but none of them worked. Mainly I remember trying the "fastboot oem fb_mode_clear" and did nothing. I didn't try this solution even though problem looks similar. Mainly I didn't want to have to unlock the bootloader and install recovery all over again.
Later I discovered that if I go to the bootloader and hit START from there, boots into OS. So it is functional.
Anyway, I installed Atomic OS ROM thinking I'll get rid of the problem and gain a custom ROM, and everything works, but the problem stays. If I reboot the phone, I have to do TWRP -> Bootloader -> System in order to get it to the OS.
Anyone has any idea on how to fix it?

I have the same problem, it comes back to recovery all the time and we can tell you about it, some help please
---------- Post added at 09:59 PM ---------- Previous post was at 09:43 PM ----------
Hi, I've come back, hahaha, I installed resurrection remix 7.1, previous all the wipes and reboot in bootloader I gave start and started, great.

I had this problem trying to install the rom ViperOS. I solved it with one of these steps:
- Boot into Fastboot, select "Start" with volume Keys.
- Flash "boot.img" directly from the zip that is ROM, do this using a PC.
- If you're using stock rom, reflash boot.img
Greetings

CypherPotato said:
I had this problem trying to install the rom ViperOS. I solved it with one of these steps:
- Boot into Fastboot, select "Start" with volume Keys.
- Flash "boot.img" directly from the zip that is ROM, do this using a PC.
- If you're using stock rom, reflash boot.img
Greetings
Click to expand...
Click to collapse
Does not work for me.
I have flash boot.ini Atomic-OS-1.5 and OCT-N-WEEKLY ...
My phone boot always in recovery
regards
Sry for my bad english.

SuperUtilisateur said:
Does not work for me.
I have flash boot.ini Atomic-OS-1.5 and OCT-N-WEEKLY ...
My phone boot always in recovery
regards
Sry for my bad english.
Click to expand...
Click to collapse
Have you tried to boot from Fastboot?

Yes, it works once...
But if I have to restart it (or turn off and start with the power button), the phone boot always in recovery.
It is then necessary to restart fastboot then press "start".

Haxorkat said:
Hey guys, hello there. I need a little help over here.
The other day I made the mistake to install an OTA on my rooted Moto G5 (dual SIM). I had the stock image, TWRP & unlocked bootloader. Of course it failed to install the OTA, but the weird thing is that it always boots to TWRP recovery. No matter if I choose to reboot completely or to boot to system from the TWRP reboot menu, it always goes back to TWRP.
Tried a few things, but none of them worked. Mainly I remember trying the "fastboot oem fb_mode_clear" and did nothing. I didn't try this solution even though problem looks similar. Mainly I didn't want to have to unlock the bootloader and install recovery all over again.
Later I discovered that if I go to the bootloader and hit START from there, boots into OS. So it is functional.
Anyway, I installed Atomic OS ROM thinking I'll get rid of the problem and gain a custom ROM, and everything works, but the problem stays. If I reboot the phone, I have to do TWRP -> Bootloader -> System in order to get it to the OS.
Anyone has any idea on how to fix it?
Click to expand...
Click to collapse
Try do a full reset through fastboot and then try installing whatever you need through fastboot and recovery. Much more reliable han ota installs/updates

Haxorkat said:
Hey guys, hello there. I need a little help over here.
The other day I made the mistake to install an OTA on my rooted Moto G5 (dual SIM). I had the stock image, TWRP & unlocked bootloader. Of course it failed to install the OTA, but the weird thing is that it always boots to TWRP recovery. No matter if I choose to reboot completely or to boot to system from the TWRP reboot menu, it always goes back to TWRP.
Tried a few things, but none of them worked. Mainly I remember trying the "fastboot oem fb_mode_clear" and did nothing. I didn't try this solution even though problem looks similar. Mainly I didn't want to have to unlock the bootloader and install recovery all over again.
Later I discovered that if I go to the bootloader and hit START from there, boots into OS. So it is functional.
Anyway, I installed Atomic OS ROM thinking I'll get rid of the problem and gain a custom ROM, and everything works, but the problem stays. If I reboot the phone, I have to do TWRP -> Bootloader -> System in order to get it to the OS.
Anyone has any idea on how to fix it?
Click to expand...
Click to collapse
install resurrection remix and lock with the update of the security patch as we know, then install via fastboot the original firmware, after rebooting install resurrection and now bootea normalmally greetings

grosobart said:
install resurrection remix and lock with the update of the security patch as we know, then install via fastboot the original firmware, after rebooting install resurrection and now bootea normalmally greetings
Click to expand...
Click to collapse
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--

SuperUtilisateur said:
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--
Click to expand...
Click to collapse
It always says that
As long as it says at the end
Write OK
It flashed successfully

OK,
After flash,
boots automatically into recovery ...
--
I tried with various boot.img. (linéage, AOSP, OctOS, ... )
Does not work ..
I started (into fastboot), I was errors. (Process stopped)
I just restored my phone ( https://mirrors.lolinet.com/firmware/moto/cedric/official/RETAIL/ )
... boot correctly.
Never mind ...
thank you all

SuperUtilisateur said:
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--
Click to expand...
Click to collapse
https://forum.xda-developers.com/g5/how-to/fyi-recovered-g5-xt-1676-to-stock-t3626088
try this first, regards

SuperUtilisateur said:
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--
Click to expand...
Click to collapse
you should flash the correct firmware on your device and it should work, I did it several times and it works perfect

Moto G5 boots to TWRP
I have the same issue. But the suggestions posted wouldn't help me. I have the stock ROM and I'm rooted with Magisk using TWRP recovery. I want to keep the stock ROM and don't want to go through the trouble of backing my data again. So, I was wondering if there was any work around. Would flashing the stock ROM, Boot and recovery without deleting user data partition help??

Noel Carson said:
I have the same issue. But the suggestions posted wouldn't help me. I have the stock ROM and I'm rooted with Magisk using TWRP recovery. I want to keep the stock ROM and don't want to go through the trouble of backing my data again. So, I was wondering if there was any work around. Would flashing the stock ROM, Boot and recovery without deleting user data partition help??
Click to expand...
Click to collapse
Back up your stuff. By cloud or other means. Then reset and load your back up on boot or boot setup

rajibahmed said:
Back up your stuff. By cloud or other means. Then reset and load your back up on boot or boot setup
Click to expand...
Click to collapse
Backing up Gigs of data is a huge pain. Even if I have to copy to my pc. So, just something that's less cumbersome.

Noel Carson said:
I have the same issue. But the suggestions posted wouldn't help me. I have the stock ROM and I'm rooted with Magisk using TWRP recovery. I want to keep the stock ROM and don't want to go through the trouble of backing my data again. So, I was wondering if there was any work around. Would flashing the stock ROM, Boot and recovery without deleting user data partition help??
Click to expand...
Click to collapse
rajibahmed said:
Back up your stuff. By cloud or other means. Then reset and load your back up on boot or boot setup
Click to expand...
Click to collapse
Read the faq section (2nd post) - answer is there
https://forum.xda-developers.com/g5/development/official-twrp-3-1-1-0-moto-g5-t3699737

grosobart said:
you should flash the correct firmware on your device and it should work, I did it several times and it works perfect
Click to expand...
Click to collapse
Anyone get the stock for 16gb/2gb version?

Mix 3 - installed GLOBAL rom and error after run

Hi. I have installed this global rom from here:
https://www.xda-developers.com/xiaomi-mi-mix-3-miui-10-global-stable-android-pie-download/
flashed it with TWRP, wiped cache and after system boot i have:
select language
select region
and after that i got message: "function find device has been closed", and the settings menu just restart. I can't do nothing bcs of this loop error...
Any ideas how to fix this?
Also after entering recovery by vol+ & power it's running xiaomi recovery, not TWRP... why?

Ok please delete, already wiped once again cache and now is fine

haxigi said:
Ok please delete, already wiped once again cache and now is fine
Click to expand...
Click to collapse
I'm running into the same problem... I did the following steps:
Reboot into the bootloader
Flashed TWRP
Held Volume UP and Power Botton to boot into TWRP
Wiped Cache and Dalvik Cache
However, this does not fix the problem. Can you further explain what you did step by step?

haxigi said:
Hi. I have installed this global rom from here:
https://www.xda-developers.com/xiaomi-mi-mix-3-miui-10-global-stable-android-pie-download/
flashed it with TWRP, wiped cache and after system boot i have:
select language
select region
and after that i got message: "function find device has been closed", and the settings menu just restart. I can't do nothing bcs of this loop error...
Any ideas how to fix this?
Also after entering recovery by vol+ & power it's running xiaomi recovery, not TWRP... why?
Click to expand...
Click to collapse
Each time you flash an official ROM twrp gets over written on reboot

xreactx said:
I'm running into the same problem... I did the following steps:
Reboot into the bootloader
Flashed TWRP
Held Volume UP and Power Botton to boot into TWRP
Wiped Cache and Dalvik Cache
However, this does not fix the problem. Can you further explain what you did step by step?
Click to expand...
Click to collapse
Same problem, also I only have china as region.

giodani97 said:
Same problem, also I only have china as region.
Click to expand...
Click to collapse
Search for miui_region_fix.zip on en.miui.com and flash in TWRP after rom.
EDIT: link is https://drive.google.com/file/d/1-g2zeY_avSZ9qqvNbFb-zP3CNp6k9GZR/view

No way to install it without twrp ?

Thanks, fixed location and force close of find device :good:

I can't get it to install with this Chinese TWRP. It says zip compatibility err. Did you guys have to do something else to get it installed.

PWn3R said:
I can't get it to install with this Chinese TWRP. It says zip compatibility err. Did you guys have to do something else to get it installed.
Click to expand...
Click to collapse
Delete the compatibility zip from the main zip and flash it again

Mackay53 said:
Delete the compatibility zip from the main zip and flash it again
Click to expand...
Click to collapse
Thanks, done and live on the Global version without wiping data.

Nice but if Zip is available, the fastboot rom is coming very soon I think maybe it's better to wait no ?

whats differences between this global and xiaomi.eu ROM?

palexis06 said:
Nice but if Zip is available, the fastboot rom is coming very soon I think maybe it's better to wait no ?
Click to expand...
Click to collapse
Will flash the same rom so doesn't matter

orsoraro said:
whats differences between this global and xiaomi.eu ROM?
Click to expand...
Click to collapse
Stay where you are, they will build an EU ROM based on global.

james1089 said:
Stay where you are, they will build an EU ROM based on global.
Click to expand...
Click to collapse
Wouldn't be too confident about that, It's always been based on the Chinese version.

Mackay53 said:
Wouldn't be too confident about that, It's always been based on the Chinese version.
Click to expand...
Click to collapse
Ah, right, I don't use miui usually. When I do it seems EU ROM was better over the years.

installed the rom, everything working fine until i flashed magisk 17.1 and stuck on the bootloop now. Anyone has the solution for this?

haris.bajramovic. said:
installed the rom, everything working fine until i flashed magisk 17.1 and stuck on the bootloop now. Anyone has the solution for this?
Click to expand...
Click to collapse
Uninstall magisk in TWRP. Don't think any works at the moment

Did you by chance tried also 16.3?

[RECOVERY][Official] TWRP 3.4.0-6 [T83x][mtp][otg]

TWRP 3.4 for Android 10 SM-T83x
This build of TWRP is now Official.
Official TWRP web link
Built using OMNI source
TWRP v3.4
See post #2 for install steps
Changelog...
1.0
Initial build
MTP, OTG and SDcard all working
4.0
Now in portrait mode
Brightness fixed
5.0
Updated for Android 10
TWRP Downloads
Download folder
Official device tree on twrp.me
--------------------->
Kernel Source
Source
Device Tree
Source
--------------------->
Beer fund

You can flash TWRP two ways, either directly from an existing TWRP install, using the linked TWRP.img file. Or you can flash using Odin and the TWRP.tar file.
You will need a custom kernel with dm-verity disabled to be able to boot up afterwards. You will also need to disable encryption and format data to be able to read from the sdcard (encryption isn't supported).
The flashing process is as follows.
Get yourself onto stock Pie firmware, using Odin to flash the complete package. Before proceeding. Boot up and make sure you have OEM unlock switch and its activated.
1. Boot into Download mode and Flash TWRP (Download) using Odin (use AP)
2. Immediately boot into TWRP after flashing takes place, hold vol up and power.
3. Format data partition (wipe/format data)
4. Reboot recovery
5. Copy WETA Kernel + Encryption disabler + Magisk zip to device. - (Download Kernel - Encryption disabler)
6. Flash WETA Kernel + Encrypt disabler + Magisk zip.
7. Boot up system, if it hangs on Samsung logo after 3min perform hard reboot.
8. Connect to internet and go to dev settings and check oem unlock is present before any rebooting.
** Custom kernel is universal for all bootloader v4 firmware.
--->

problem download
From croatia I cannot access this link. Can you upload on mega.
Thanks

macakfelix said:
From croatia I cannot access this link. Can you upload on mega.
Thanks
Click to expand...
Click to collapse
Your kidding? Usually people say upload anywhere but mega because of access.. haha. But sure. I'll mirror it to mega
Sent from my SM-N9600 using Tapatalk

macakfelix said:
From croatia I cannot access this link. Can you upload on mega.
Thanks
Click to expand...
Click to collapse
Mega mirrors are up,
Sent from my SM-N9600 using Tapatalk

Tested and working on T835 Pie. Finally good to have a TWRP with MTP & adb working. Thanks mate.

Mentalmuso said:
TWRP 3.3.0 for PIE SM-T83x
--------------------->
Beer fund
Click to expand...
Click to collapse
Hi friend, i flashed with odin but seems not to work, same as without flashing... im on pie now, but when on oreo was not so easy to flash twrp as this... i remember had to flash 1 or 2 more files, but not sure... any help?
EDIT im talking about TabS4_oreo_forced_encryption_disabler... do you get it work just flashing twrp or do you need any extra procedure?
Thanks in advance
My device is a SM-T835N

wallyhenderson said:
Hi friend, i flashed with odin but seems not to work, same as without flashing... im on pie now, but when on oreo was not so easy to flash twrp as this... i remember had to flash 1 or 2 more files, but not sure... any help?
EDIT im talking about TabS4_oreo_forced_encryption_disabler... do you get it work just flashing twrp or do you need any extra procedure?
Thanks in advance
My device is a SM-T835N
Click to expand...
Click to collapse
Sorry, I completely forgot that
Flash TWRP with Odin
Reboot straight to twrp.
Flash encryption disabler.
Format data.
Reboot recovery.
Mount data make sure you can read it .
Then you can flash a rom, kernel etc. I'll update the op in a bit
Sent from my SM-N9600 using Tapatalk

macakfelix said:
From croatia I cannot access this link. Can you upload on mega.
Thanks
Click to expand...
Click to collapse
https://mega.nz/#F!TZNgRYyB!7wa-W3moNILsezgkuj3nKA

Mentalmuso said:
Sorry, I completely forgot that
Flash TWRP with Odin
Reboot straight to twrp.
Flash encryption disabler.
Format data.
Reboot recovery.
Mount data make sure you can read it .
Then you can flash a rom, kernel etc. I'll update the op in a bit
Sent from my SM-N9600 using Tapatalk
Click to expand...
Click to collapse
Friend i have
Flash "TWRP-ODIN_Pie_3.3.0_sm-t83x_mentalmuso.tar" with Odin OK
Reboot straight to twrp OK
Flash encryption disabler "T83x_PIE_encrypt_disabler_+++.zip" OK
Format data OK
Reboot recovery OK
Mount data make sure you can read it OK (think ok, didnt know what to do)
And now im in a loop boot... can you help me i use phone to work and sadly will have to solve today or have to flash stock pie rom
Thanks in advance
Restored stock pie rom... seems to work fine without twrp but when trying to flash TWRP-ODIN_Pie_3.3.0_sm-t83x_mentalmuso and it says "only official released binaries allowed to be flashed (recovery)

wallyhenderson said:
Friend i have
Flash "TWRP-ODIN_Pie_3.3.0_sm-t83x_mentalmuso.tar" with Odin OK
Reboot straight to twrp OK
Flash encryption disabler "T83x_PIE_encrypt_disabler_+++.zip" OK
Format data OK
Reboot recovery OK
Mount data make sure you can read it OK (think ok, didnt know what to do)
And now im in a loop boot... can you help me i use phone to work and sadly will have to solve today or have to flash stock pie rom
Thanks in advance
Click to expand...
Click to collapse
What version of Android are you on?
Sent from my SM-N9600 using Tapatalk

wallyhenderson said:
Friend i have
Flash "TWRP-ODIN_Pie_3.3.0_sm-t83x_mentalmuso.tar" with Odin OK
Reboot straight to twrp OK
Flash encryption disabler "T83x_PIE_encrypt_disabler_+++.zip" OK
Format data OK
Reboot recovery OK
Mount data make sure you can read it OK (think ok, didnt know what to do)
And now im in a loop boot... can you help me i use phone to work and sadly will have to solve today or have to flash stock pie rom
Thanks in advance
Click to expand...
Click to collapse
Have you flashed a custom kernel? Or at least flashed magisk?
You cant boot using a stock kernel, when you have any other custom features on your device.
Sent from my SM-N9600 using Tapatalk

Mentalmuso said:
Have you flashed a custom kernel? Or at least flashed magisk?
Sent from my SM-N9600 using Tapatalk
Click to expand...
Click to collapse
it is mandatory to flash a custom kernel? will do if nessesary... i didnt... and didnt flashed magisk
---------- Post added at 11:05 PM ---------- Previous post was at 10:57 PM ----------
Mentalmuso said:
What version of Android are you on?
Sent from my SM-N9600 using Tapatalk
Click to expand...
Click to collapse
im on pie T835NKOU2BSD1

wallyhenderson said:
it is mandatory to flash a custom kernel? will do if nessesary... i didnt... and didnt flashed magisk
---------- Post added at 11:05 PM ---------- Previous post was at 10:57 PM ----------
im on pie T835NKOU2BSD1
Click to expand...
Click to collapse
Kernel - pre rooted should boot. https://nextcloud.justbeca.us/s/JMgdcpt6kxdwNzo
Sent from my SM-T830 using Tapatalk

What are the steps for flashing the twrp 3.3.0 img via an existing twrp install?

hpc305 said:
What are the steps for flashing the twrp 3.3.0 img via an existing twrp install?
Click to expand...
Click to collapse
install - img - select the img file - select recovery
Sent from my SM-N9600 using Tapatalk

Encryption Disabler was broken
Updated to V2, please use this or there will be problems.
See post #2 for downloads.
--->

Mentalmuso said:
You can flash TWRP two ways, either directly from an existing TWRP install, using the linked TWRP.img file. Or you can flash using Odin and the TWRP.tar file.
You will need a custom kernel with dm-verity disabled to be able to boot up afterwards. You will also need to disable encryption and format data to be able to read from the sdcard (encryption isn't supported).
The flashing process is as follows.
Get yourself onto stock Pie firmware, using Odin to flash the complete package. Before proceeding. Boot up and make sure you have OEM unlock switch and its activated.
1. Boot into Download mode and Flash TWRP (Download) using Odin
2. Immediately boot into TWRP after flashing takes place, hold vol up and power.
3. Format data partition (wipe/format data)
4. Reboot recovery
5. Copy Encryption disabler and WETA_Kernel or WETA_Rom to device - (Download Enryption disabler) (Download WETA_Kernel)
6. Flash Encryption disabler, Flash WETA_Kernel or WETA_Rom
7. Boot up system, if it hangs on Samsung logo after 3min perform hard reboot.
8. Connect to internet and go to dev settings and cheeck oem unlock is present before any rebooting.
**Custom kernel is pre-rooted with magisk.
**You will need to manually install magisk manager app.
--->
Click to expand...
Click to collapse
Some things to note:
0. Requirements are:
USB Cable (Samsung Tab S4 default cable recommended)
A computer where Odin works (ie. my AM4 X370 Ryzen 7 system did not work, maybe some driver issue?)
Best is to put encryption disabler & Kernel onto the micro SD card in the Tab S4 already, you can flash from SD card in TWRP!
1. Flash TWRP in AP slot - beware if you did not untick Auto Reboot, it will immediately restart and you miss 2.
2. Hold those buttons before the vibration kicks in, otherwise you are too late
4. I couldn't do that from TWRP itself for some reason (it just shut off), but button combo worked perfectly
5. [Edit] Do that before hand, I recommend the micro SD card you can put into the Tab S4
6. I flashed encryption disabler (V2) first, then you have to flash the kernel image, flash it to BOOT!
7. Don't just wait 3 min, my Tablet booted after 10 min without issue! I had this before aswell, you just need to give it more time!
Question: Can I update Magisk with this?

neuer31 said:
Some things to note:
0. Requirements are:
USB Cable (Samsung Tab S4 default cable recommended)
A computer where Odin works (ie. my AM4 X370 Ryzen 7 system did not work, maybe some driver issue?)
Best is to put encryption disabler & Kernel onto the micro SD card in the Tab S4 already, you can flash from SD card in TWRP!
1. Flash TWRP in AP slot - beware if you did not untick Auto Reboot, it will immediately restart and you miss 2.
2. Hold those buttons before the vibration kicks in, otherwise you are too late
4. I couldn't do that from TWRP itself for some reason (it just shut off), but button combo worked perfectly
6. I flashed encryption disabler (V2) first, then you have to flash the kernel image, flash it to BOOT!
7. Don't just wait 3 min, my Tablet booted after 10 min without issue! I had this before aswell, you just need to give it more time!
Question: Can I update Magisk with this?
Click to expand...
Click to collapse
Yeah flashing magisk should be fine once your data partition is unencrypted.
Sent from my SM-N9600 using Tapatalk

Mentalmuso said:
install - img - select the img file - select recovery
Sent from my SM-N9600 using Tapatalk
Click to expand...
Click to collapse
F###, thanks, bro.
Just flashed it as recovery and have this now.
Can you delete this suggestion? It should be flashed as Boot, GOD!

Unable to flash custom ROM

Hello,
I am unable to flash a custom ROM on my note 9 pro (joyeuse), I tried xiaomi.eu, havocos, evolutionx, lineageos, etc.
Also tried every possible recovery, no matter what I do when I hit system reboot, I land on the fastboot screen.
Followed the procedure, format data, wipe dalvik/cache tried disabling encryption, flash magisk, I'm out of ideas.
please help.

Logs would help.
Or even screenshots of any errors.

käsesockel said:
Hello,
I am unable to flash a custom ROM on my note 9 pro (joyeuse), I tried xiaomi.eu, havocos, evolutionx, lineageos, etc.
Also tried every possible recovery, no matter what I do when I hit system reboot, I land on the fastboot screen.
Followed the procedure, format data, wipe dalvik/cache tried disabling encryption, flash magisk, I'm out of ideas.
please help.
Click to expand...
Click to collapse
Follow rom install guide to the letter (and no extra steps either). If unsuccessful ask in the rom thread. You didn't have to open a new thread mentioning all these roms. It's hard to help you because each rom has a different procedure.

I've already tried everything.
Either bootloop or fastboot screen.
I followed the instructions exactly.
I would like to install Lineage-OS

have you unlocked your bootloader?

OrGiMaSu said:
have you unlocked your bootloader?
Click to expand...
Click to collapse
of course

Againandagain said:
of course
Click to expand...
Click to collapse
what recovery did you use?
copy all the file name

Oh, it is terrible.
After using MiFlash it is MI Recovery 3.0
I have to flash a new recovery. What is the best for flashing LOS?
I am currently loading "twrp-3.4.0.14-joyeuse-mauronofrio.img"

Againandagain said:
Oh, it is terrible.
After using MiFlash it is MI Recovery 3.0
I have to flash a new recovery. What is the best for flashing LOS?
I am currently loading "twrp-3.4.0.14-joyeuse-mauronofrio.img"
Click to expand...
Click to collapse
try this revocery

Againandagain said:
Oh, it is terrible.
After using MiFlash it is MI Recovery 3.0
I have to flash a new recovery. What is the best for flashing LOS?
I am currently loading "twrp-3.4.0.14-joyeuse-mauronofrio.img"
Click to expand...
Click to collapse
After installing TWRP are you immediately and succesfully rebooting to TWRP recovery before doing anything else? - if you do not do that, then you can end up back at MIUI recovery.

OrGiMaSu said:
try this revocery
Click to expand...
Click to collapse
I will try
... and now? Which Lineage-OS (17.1) and GApps.
Sorry, you have to help me.

OrGiMaSu said:
try this revocery
Click to expand...
Click to collapse
or this?
PBRP-miatoll-3.0.0-20201215-2038-UNOFFICIAL.zip

lineage-17.1-20201213-UNOFFICIAL-miatoll.zip
I found that on androidfilehost. Is that okay?

käsesockel said:
Hello,
I am unable to flash a custom ROM on my note 9 pro (joyeuse), I tried xiaomi.eu, havocos, evolutionx, lineageos, etc.
Also tried every possible recovery, no matter what I do when I hit system reboot, I land on the fastboot screen.
Followed the procedure, format data, wipe dalvik/cache tried disabling encryption, flash magisk, I'm out of ideas.
please help.
Click to expand...
Click to collapse
No need use recovery, Just download this gsi rom（https://sourceforge.net/projects/he...5011-HBTRIA-10-12-2020-GSI-Aonly.7z/download） and extract the 7z file, rename the extracted rom as system.img ,and type in fastboot cmd:
fastboot flash system C:\system.img, Which“ C:\system.img ” should be replaced by your rom's directory.
for powershell type .\fastboot flash C:\system.img
then fastboot reboot

I do not trust myself.
The last time always bootloop.
Can someone give me step by step instructions.
for example:
1. Wipe ...
2. do not Format ...
...
F**k off
Mi Recovery again.

Againandagain said:
I do not trust myself.
The last time always bootloop.
Can someone give me step by step instructions.
for example:
1. Wipe ...
2. do not Format ...
...
F**k off
Mi Recovery again.
Click to expand...
Click to collapse
use pbrp that I shared to you, and tell me your step installing recovery.
tell me, are u Indonesian? if yes hit me up on PM

OrGiMaSu said:
use pbrp that I shared to you, and tell me your step installing recovery.
tell me, are u Indonesian? if yes hit me up on PM
Click to expand...
Click to collapse
Sorry, german
Start ADB on Windows
Start Phone on fastboot-mode
fastboot flash recovery (renamed) PBRP.img
restart Phone
everything is okay, but Start Recovery again - MI-Recovery 3.0

Againandagain said:
Sorry, german
Start ADB on Windows
Start Phone on fastboot-mode
fastboot flash recovery (renamed) PBRP.img
restart Phone
everything is okay, but Start Recovery again - MI-Recovery 3.0
Click to expand...
Click to collapse
do this instead
copy pbrp.img to your internal
(on pc)
fastboot boot recovery pbrp.img
when you booted to pbrp, flash pbrp.img
reboot recovery
if you have telegram, it's better to join our discussion group t.me/miatollofficial

OrGiMaSu said:
do this instead
copy pbrp.img to your internal
(on pc)
fastboot boot recovery pbrp.img
when you booted to pbrp, flash pbrp.img
reboot recovery
if you have telegram, it's better to join our discussion group t.me/miatollofficial
Click to expand...
Click to collapse
Thank you
Telegram and many other tricks bring me Lineage-OS.
Now, I am trying to root.
Bootloop again

Againandagain said:
Thank you
Telegram and many other tricks bring me Lineage-OS.
Now, I am trying to root.
Bootloop again
Click to expand...
Click to collapse
what magisk version did u use?
use magisk 21.1