I would like to present you first kernel for nitrogen for Pie ROMS (MIUI+GSI)
Installation steps:
1)Download latest kernel zip
2)Reboot to recovery
3)Mount vendor partition in recovery
4)Flash kernel zip
5)Wipe cache+dalvik-cache
6)Reboot
Features:
-Overclock+Underclock+Undervolt
-sdFAT(exFAT) support
-KCAL
-Governors: cultivation, nightmare, darknessV5, darkness, alucard
-Maple I/O scheduler
-GPU undervolt
-CRC on/off support
-FSYNC on/off support
-Fast charge via USB port
-Wireguard
-Power Efficient Workqueue by default
-Headphones sound gain control
-Microphone gain control
-320K AAC encoding (for audiophiles mostly)
-Powersuspend!
-many power efficient workingueues patches
-ZRAM/SWAP disabled by default
Feel free to join to my Telegram group where you will get available ROMs list, fixes and latest test versions of ResurrectedKernel! :
JOIN!
DOWNLOAD LINKS:
Click here for old versions
Click here for newest versions
IM NOT RESPONSIBLE FOR ANY PROBLEMS OR BUGS THAT MIGHT HAPPEN WITH YOUR DEVICE
XDA:DevDB Information
ResurrectedKernel, Kernel for the Xiaomi Mi Max 3
Contributors
mario_R
Cirno/remicaa- big help with sources
afr- bringup kernel source upstreamed to 4.4.180
Makshow- tester
opasha- tester
Source Code: Click
Kernel Special Features:
Version Information
Status: Beta
Current Stable Version: ----
Stable Release Date: ----
Current Beta Version: v5
Beta Release Date: 2019-04-28
Created 2018-09-15
Last Updated 2019-04-28
Reserved
Every version is tested before pushing it on XDA
Changelog:
V7.0:
-Android 10 support
-MIUI and GSI compatible
V6.2:
-kernel updated to 4.4.189 version
-added missing touch drivers (thanks to @afr30010)
-added version for MIUI STABLE
V6.1:
-wireguard updated
-reverted CPU voltages to the previous state (unstability fix for some users)
V6:
-kernel upstreamed from 4.4.153 to 4.4.183
-Westwood TCP added and set by default
-GPU: unlock 19MHz for idle state
-improvement: system will now boot with maximum CPU frequency
-undervolted 1.1GHz/1.8GHz/2.1GHz/2.2GHz frequencies
-default pwrlvl for GPU changed from 2 to 3 (now GPU can sit down to 160MHz instead of constantly running at 266MHz even when it's not necessary)
-CRC check enabled by default
-improvements for RAM utilization
-improvements for CPU when it's in idle state
-Wireguard updated
-mine kernel presets when system boot up
More info here CLICK
V5.1:
-fix for sound+videos on latest beta MIUI versions
V5.01:
-re-enabled zRAM and SWAP as some users complain about low memory with a lot of apps in background on 4GB RAM variant
V5:
-added KCAL
-Governors: cultivation, nightmare, darknessV5, darkness, alucard
-Maple I/O scheduler (from now it's set as default since it offers best file system performance)
-GPU undervolt
-CRC on/off support (off by default for better performance)
-FSYNC on/off support (off by default for better performance)
-Fast charge via USB port
-Wireguard
-Power Efficient Workqueue by default
-Headphones sound gain control
-Microphone gain control
-320K AAC encoding (for audiophiles mostly)
-Powersuspend!
-many power efficient workingueues patches
-ZRAM/SWAP disabled by default
V4:
-ResurrectedKernel for Pie ROMs, same features as the Oreo version
-new features coming soon!
-update: sound doesn't work on latest miui 9.3.28 and latest stable
V3:
-added sdFAT (exfat) support
-undervolt (as you wanted me to do it few days ago) up to -500000 uV (depends on frequency)
V2:
-Overclock both big and little cores
-Underclock for more battery juice
-WiFi fixed
V1:
-- Initial release
Reserved
Features please
Zanr Zij said:
Features please
Click to expand...
Click to collapse
It's initial release, so it's just compiled from Xiaomi sources. As i said, i don't have this device yet, so i need you guys to test if Xiaomi's sources are complete and everything works fine. If it boots up, then i will add features to it
I'm guessing the kernel should be flashed on top of this rom?
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
SUPERUSER said:
I'm guessing the kernel should be flashed on top of this rom?
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
Click to expand...
Click to collapse
Yes, it's for any Oreo ROM. MIUI and Custom. I'm not sure about if it works on Pie GSI
Do not boot. Xiaomi eu
Boots into fastboot
Mikromama said:
Do not boot. Xiaomi eu
Boots into fastboot
Click to expand...
Click to collapse
Yep, same here with pitch black recovery and twrp recovery. Flashed over 8.8.9 xiaomi.eu rom.
Flash on miuipro 8.9.13
- Cannot boot, it auto boot into fast boot
- After flash magisk 17.1 , it can boot to UI but cannot power on Wifi and Network data
Can you add overclocking?
souljaboy said:
Can you add overclocking?
Click to expand...
Click to collapse
For now, im just fighting with WiFi drivers
Did ya we're able to fix the wifi issue?
Did ya we're able to fix the wifi issue?
jacky3362 said:
Did ya we're able to fix the wifi issue?
Click to expand...
Click to collapse
Yep, he's releasing it soon. Just undergoing some tests. Wifi fixed and overclocked too.
V2 Version is ouot
jacky3362 said:
Did ya we're able to fix the wifi issue?
Click to expand...
Click to collapse
V2 Version is out guys! Check out the changelog and enjoy Snapdragon 660 CPU performance in your Mi Max 3 equiped with Snapdragon 636
Changelog:
V2:
-Overclock both big and little cores
-Underclock for more battery juice
-WiFi fixed
Just installed on xiaomi eu 8.9.20(latest) it works fine.
edit. Wifi don't working even with fix.
In antutu i have got 119K on stock kernel and 131.7k on ResurrectedKernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shlyify said:
Just installed on xiaomi eu 8.9.20(latest) it works fine.
edit. Wifi don't working even with fix.
In antutu i have got 119K on stock kernel and 131.7k on ResurrectedKernel
Click to expand...
Click to collapse
Did you mount /vendor partition before flash both .zip files?
Btw. nice score. 12k points more
mario_R said:
Did you mount /vendor partition before flash both .zip files?
Click to expand...
Click to collapse
yes I did both,100% mount/vendor
first i installed kernel than 2x reboot phone cause 1st reboot was laggy, than i install wifi fix
Shlyify said:
yes I did both,100% mount/vendor
first i installed kernel than 2x reboot phone cause 1st reboot was laggy, than i install wifi fix
Click to expand...
Click to collapse
Maybe try manually replace qca_cld3_wlan.ko from the zip file in /vendor/lib/modules/qca_cld3 with a file manager for example, root explorer
Set permission to 644 and reboot
SUPERUSER said:
Maybe try manually replace qca_cld3_wlan.ko from the zip file in /vendor/lib/modules/qca_cld3 with a file manager for example, root explorer
Set permission to 644 and reboot
Click to expand...
Click to collapse
still not working. Here what i did:
1. copy file "qca_cld3_wlan.ko" from WiFi_fix.zip
2. I didn't know where the file should excatly be,so I paste the file in 2 places:
- vendor/lib/
- vendor/lib/modules/
3. set permission 644 for the file in both places - vendor/lib/ and - vendor/lib/modules/
4. reboot
any ideas?
Related
Hi guys, I have proposed to make a kernel for the falcon and here they have it <3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot:
Click to expand...
Click to collapse
Old builds history:
http://pastebin.com/RqyTpYna
New Build Evolution Kernel-R10 , For Nougat and Marshmallow Roms
- Linux code updated to lastest LineageOS source: 3.4.113 :good:
- Based on a new clean source for greater stability
- Compiled with latest simple GCC 4.8 (great for this) :good:
- Some optimizations for kernel compression (lzma)
- Many optimization for memory usage and reduce Lag
- Added Customs TCP
- New AsCaRex custom TCP by TeamMex Added (nice)
- Lzma compression (very nice)
- No more useless mods
- Added and improved SIO, SIOPLUS, VR, ZEN v2 I/O schedulers and default BFQ, etc...
- Row I/O scheduler is recommended by me :good:
- Added toggles for wakelocks
- MSM Hotplug stable rules (Nice deep sleep Now)
- Powersuspend updated (Use in Hybrid mode)
- Kcal v2 support
-Dt2w added but does not work for the moment (disable)
- Selinux enabled in permissive mode by default
- WQ Power Efficient tweaks
- State notifier driver added
- Lcd notify driver Removed (NO MORE START SCREEN FREEZE)
- New Governors added: zzmoove, Xperience by @TeamMex , Bioshock, Lionheart and ElementalX (testing)
- Interactive and Ondemand governor updated for better efficiency
- Added Sound Control v3.6
- Fast Charge enable by default
- Fix memory leaks for better perfomance
- Many more optimizations for performance and battery saving (check source)
- New TCP congestion driver called AsCaRex by @TeamMex Added
AsCaRex employs end-to-end bandwidth measurements to set cwnd and ssthresh after packet loss. The probing phase is as the original Reno, have a modified control mechanism for use with large congestion windows. A table indicates how much to increase the congestion window when an ACK is received.
Click to expand...
Click to collapse
[/SIZE]
Important: Use the kernel adiutor application to tune this kernel
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
-If you use SUPERSU or Magisk, after installing my kernel install again
-Reboot and Enjoy :good:
If you like my work, contribute for more updates please:
Download:
https://www.androidfilehost.com/?fid=889764386195904758
**No mirrors please**
Suggestions for balance perfomance/battery
-Use interactive gov with hispeedfreq on 787mhz and min freq 300mhz....
-For more conservative use Bioshock or Xperience governor and min freq 300mhz
-For most battery life use zzmoove gov and select profile #2 (Some lags)
-Cpu hotplug as default msm_hotplug
-Sheduler ROW
-In misc features select suspension mode on hybrid (default) and TCP select AsCaRex or westwood
Consider please
Hi friends, I appreciate your support testing my work, If you like my kernel, contribute please, actually I'm studying at the university, I do this in my free time, I would appreciate a little help if it is at your disposal, thank you very much!
Evolution Turbo Kernel Oreo Updated
-Kernel build with QUVNTNN 6.4 2018.01 Custom ToolChain
-Improved Cortex-A7 configs
-Improved XZ kernel compression
-def_config regenerate
-Updated cpufreq and gpu drivers configs for better performance
-MSM_HOTPLUG
-Spinlocks changes
-Significant lag in oreo reduced
-Simple Adreno GPU algorithm added
-New governors distribution: Default govs, XPerience, SmartMax and BioShock govs
-All TCP cong is activated (AsCaRex default)
-Many more changes for you..
Source: https://github.com/willizambrano/android_kernel_motorola_msm8226
Download: https://androidfilehost.com/?fid=746163614322268638
How to install:
-Paste the zip on internal memory
Backup of you stock boot.img
-Install zip with twrp recovery
-Reboot and Enjoy :good:
Thanks to:
-CodeAurora
-CyanogenMod team
[email protected] for Sound Control
[email protected]
[email protected] for Kcal Screen Control
[email protected] for cherry-picks
[email protected] for cherry-picks
[email protected] Arriaga
- @TeamMex
Click to expand...
Click to collapse
XDA DevDB Information
Evolution_Kernel, Kernel for the Moto G
Contributors:
@willizambrano01
Click to expand...
Click to collapse
Sources:
https://github.com/willizambrano/android_kernel_motorola_msm8226
Click to expand...
Click to collapse
XDA:DevDB Information
Evolution Kernel unified for Oreo-MM/Nougat roms, Kernel for the Moto G 2014
Contributors
willizambrano01, willizambrano01
Source Code: https://github.com/willizambrano/android_kernel_motorola_msm8226
Kernel Special Features:
Version Information
Status: Beta
Stable Release Date: 2018-06-03
Current Beta Version: TURBO
Created 2016-12-07
Last Updated 2018-10-23
Downloaded and testing. Thank you
Good work,but its just for CM ROMs? :/
DeluxeMark said:
Good work,but its just for CM ROMs? :/
Click to expand...
Click to collapse
7.1 roms baseds on cm14.1 or aosp 7.1
willizambrano01 said:
7.1 roms baseds on cm14.1 or aosp 7.1
Click to expand...
Click to collapse
Nice! So i'll test it
Edit: When i've flashed the kernel,my superSU is gone,its normal?
And when i reflash the superSU,my sim doesnt work :/
Keep up the good work! smooth butter with RR Rom!
DeluxeMark said:
Nice! So i'll test it
Edit: When i've flashed the kernel,my superSU is gone,its normal?
And when i reflash the superSU,my sim doesnt work :/
Click to expand...
Click to collapse
It have in build root permission.. Goto developer options and activate root access for apps&adb..
.
No need to flash supersu
captian_jb said:
It have in build root permission.. Goto developer options and activate root access for apps&adb..
.
No need to flash supersu
Click to expand...
Click to collapse
Actually im using tesla N rom and it isnt pre rooted
Is this for titan?
do you have any plans on supporting GPU/CPU underclock overclock and undervolt?
DeluxeMark said:
Actually im using tesla N rom and it isnt pre rooted
Click to expand...
Click to collapse
Goto developer options find root access menu.. See the attachment...
Its not there u need SuperSU..
Otherwise activate root access for apps&adb
anybody using RR 7.1.1 ? have laggy issues?
captian_jb said:
Goto developer options find root access menu.. See the attachment...
Its not there u need SuperSU..
Otherwise activate root access for apps&adb
Click to expand...
Click to collapse
This rom isnt prerooted man
Can some1 review the battery and OS performance after using this kernel ?
New build For CM13
-Evolution CM13 - R1 - New Happy Christmas Edition
-Linux 3.4.51
-Linaro 4.9 CortexA7 optimization
-Many optimization for memory usage and reduce Lag
-Added TCP modes like westwood
-Optimized when compiling: pipeFlags, -O3, Gzip
-Added fast charge v2
- Optimized BFQ planner
-Added toggles for wakelocks (activate them with kernel adiutor)
-Advanced Intellidemand and Intelliactive Governors
-Hotplug AutoSMP added
-Powersuspend added and optimized
-Fsync enabled by default
-DT2W/S2W features
-Added Kcal v2 support
-Many more optimizations for performance and battery saving
Click to expand...
Click to collapse
Download:
https://www.androidfilehost.com/?fid=673368273298918120
**No mirrors please**
Click to expand...
Click to collapse
***Very soon update for nougat***
Waiting update for nougat !
-Evolution_N-R3 is ready (need test it, My device is a falcon and works perfectly)
-Linux 3.4.100
-Linaro 4.9 CortexA7 optimization
-Many optimization for memory usage and reduce Lag
-Added TCP modes like westwood
-Optimized when compiling: pipeFlags, -O3, Lzma compression (very nice)
-Added fast charge v2 deleted (not work correctly)
- More BFQ optimizatios
-Added toggles for wakelocks
-Hotplug MSM (Very nice)
-Powersuspend v1.5 added and optimized
-Fsync enabled by default
-SoundControl 3.5 added
-Added Kcal v2 support
-DT2W/S2W features woohooo
-Selinux enabled in permissive mode
-Many more optimizations for performance and battery saving (check source)[/QUOTE]
Download:
https://www.androidfilehost.com/?fid=529152257862690587
?? downloading !! ??
Wonderful kernel. Zero lag anywhere even on snapchat. My titan feels like a 6p lol. Thanks
EXO_K said:
Wonderful kernel. Zero lag anywhere even on snapchat. My titan feels like a 6p lol. Thanks
Click to expand...
Click to collapse
Thanks for you feedback bro, enjoy??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][FONT="Tahoma"][COLOR="Black"]/*
* I Do not Become Responsible For The Bad Installation
* Now Your Warranty Is Mine, Before Flashing Investigate
* You Decide to Make All These Modifications to Your Device
* Under Your Own Risk, If You Spoil Your Device, I Will Laugh At You
*/[/COLOR][/FONT][/B]
Requirements:
-Huawei P10 Lite WAS-L01,L01A,LX1,LX1A,LX2,LX2J,L22,L22J,LX3,L23,L03
-Huawei P10 Lite-Recovery Twrp EMUI 8.0.0
https://forum.xda-developers.com/p1...-emui-8-0-0-huawei-p10-lite-dual-sim-t3780780
-Only For Free Versions (Dual Sim And Single Sim)
-Bootloader Unlocked
-Activate OEM Unlock
CONTENTS...
- Credits :angel:
- Features
- Bugs
- Installing Procedure
- Downloads :laugh:
- How to use
- Test
BUGS...
- Not found yet.
INSTALLING PROCEDURE...
- Download CUSTOM KERNEL and install Recovery Twrp, The files You are in the download section.
- Copy it to your device sdcard(outside the folder)
- Go into recovery mode
(Make Sure to be in F2FS data partition)
- Select Elemental-Kernel.zip
- Installation Starts
-Make,Wipe,Davilk Cache
- Reboot Now
- Done.
The Group Telegram: Huawei Development
https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
The THANKS button encourages me to keep working for free. You decide if it's worth pressing
XDA:DevDB Information
Kernel For The Huawei P10 Lite
Contributors
KingOfMezi
Chisetdel31260
Neondragon1909
vovan1982
ginnocenti
Alexxxx1
-KangVIP Framework & Team HRT
-Team Win Recovery Project For P10 Lite
-Huawei Technologies Co, Ltd. 华为技术有限公司
Kernel-Source: https://github.com/KingOfMezi/Kernel-Elemental.git
ROM OS Version: Android 8.0.0 Oreo
ROM Kernel: Linux 4.4.23+
ROM Firmware Required: EMUI 8.0.0
Version Information
Status: Stable
Current Stable Version: 2018-10-10
Stable Release Date: 2018-10-10
Created: 2018-10-10
Last Updated: 2018-10-10
The THANKS button encourages me to keep working for free
You decide if it's worth it to press or donate
https://www.paypal.me/KingOfMezi
ChangeLog:
(2018-10-16) Elemental-KernelV5.8-EMUI8.0.zip
Elemental-KernelV5.8-EMUI8.0 https://mega.nz/#!rE5kUCpL!RWyDWXq4YZXWccIp4yT_T7qfbITebkZ2YoLKrahIGIA
-Removed Root Check Hi6250 All models:
Hey, I just tried the kernel, without root but WITH an unlocked boot loader and its kernel and it goes to safetynet and it works with pokemon without magisk root, so thank you very much for this amazing kernel. It's simply the best thing that could happen for all hi6250 devices.
edit: after updating magisk to 17.1, Pokémon go is working
-Activate Lazyplug:
Awesome changes coming,options , lazyplug (arters new awesome project which increases performance and battery ) new gpu drivers , new malloc ( Jcmalloc 4.0.0 )
kernel is going to be awesome !! ... https://github.com/KingOfMezi/Kernel-Elemental/commit/cf5803b88bf7d0d45c1f2cfac6c6699d7b3b7ad5
-Activate Huawei Einstein Music https://drive.google.com/file/d/1sV_Ju-Une77vR2KJjB7FW2FAlnThMyQw/view
-Enabled call recorder for any version https://drive.google.com/file/d/1it-78sL_hJzLIP2kRHkbF1EqM4229pLf/view
Click to expand...
Click to collapse
-Fixed Wifi and Bluetooth everything works
-Deleted Virtual fingerprint
-Compiled with latest Linaro 4.9 toolchain GCC 8.1.0
-Activate additional TCP congestion algorithms
https://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957
+ Performance and new codes
-I/O Scheduler (Zen, tripndroid, sio, sioplus)
-Adds Bluactive Governor
-Adds Impulse Governor
-Enabled Selinux Permissive
-Updates to reduce kernel size
-Config.Video_Fullscreen (Unlimited)
-Enabled screen rotation automatic
-Enabled screen 4x4,4x5,5x5,6x5 https://drive.google.com/file/d/10Br79of4Q7PfffGcsSDaHAHcldJRAz7S/view
-Enabled CloudFolder
-Config.SlowMotionZoom
-Config.Videosize.1080p
-Enabled Facial Unlock 100% https://drive.google.com/file/d/1L2d-DVMi4hJ2FV_d7_EoSsNKfRspDMpG/view
-Twin application
-Support DTS
-Frp_unlock
-Optimizations Etc
-Is More Stable And Fluid
-Activated All Huawei Hidden Functions
(2018-10-14) Elemental-KernelV5-EMUI8.0.zip
Download: Link Available: https://mega.nz/#!2RJEzC4Z!NBd5h1JUjmLl0u4nlXs6Cx-8C92Kb9OJZ0T4FmgfqEc
-Fixed Wifi and Bluetooth everything works
-Deleted Virtual fingerprint
-Compiled with latest Linaro 4.9 toolchain GCC 8.1.0
-Activate additional TCP congestion algorithms
https://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957
+ Performance and new codes
-I/O Scheduler (Zen, tripndroid, sio, sioplus)
-Adds Bluactive Governor
-Adds Impulse Governor
-Enabled Selinux Permissive
-Updates to reduce kernel size
-Config.Video_Fullscreen (Unlimited)
-Enabled screen rotation automatic
-Enabled screen 4x4,4x5,5x5,6x5
-Enabled CloudFolder
-Config.SlowMotionZoom
-Config.Videosize.1080p
-Enabled Facial Unlock 100%
-Twin application
-Support DTS
-Frp_unlock
-Optimizations Etc
-Is More Stable And Fluid
-Activated All Huawei Hidden Functions
(2018-10-10) Elemental-KernelV4-EMUI8.0.zip
Download: Link Available: https://mega.nz/#!OEgnzSwb!_mLi1k6BK5EXtvRHJETDyMJJgdbMV-zL5eZzmVWJVGY
-Compiled with latest Linaro 4.9 toolchain
-Adds Bluactive Governor
-Adds Impulse Governor
-Enabled Selinux Permissive
-Updates to reduce kernel size
-Added zen, fiops I/O schedulers
-Config.Video_Fullscreen (Unlimited)
-Enabled screen rotation automatic
-Enabled screen 4x4,4x5,5x5,6x5
-Enabled CloudFolder
-Enabled Fingerprint Virtual
-Config.SlowMotionZoom
-Config.Videosize.1080p
-Enabled Facial Unlock 100%
-Twin application
-Support DTS
-Frp_unlock
-Optimizations Etc
-Is More Stable And Fluid
-Activated All Huawei Hidden Functions
After flashing, I'm not able to turn WiFi on.
dawid9706 said:
After flashing, I'm not able to turn WiFi on.
Click to expand...
Click to collapse
ok I will solve that detail and upload again to Kernel V4.1 do not worry :good:
The THANKS button encourages me to keep working for free. You decide if it's worth pressing
edit: source code released https://github.com/KingOfMezi/Kernel-Elemental
Even when.I flash the kernel and I open about phone it shows that I have V2 ... do I need to.change the twrp recovery from @KingOfMezi
ameshiya said:
Even when.I flash the kernel and I open about phone it shows that I have V2 ... do I need to.change the twrp recovery from @KingOfMezi
Click to expand...
Click to collapse
The elemental rom comes by default with its kernel,sorry
edit: Use it in emui 8.0.0 stock, you will have many incredible functions,luck :highfive:
Sorry there are two things that I didn't undestand:
Removed Root Check Hi6250 All models means that the kernel is not rooted?
-Make,Wipe,Davilk Cache means that I have to wipe only the Dalvik cache or that I have to wipe everything plus the Dalvik Cache?
Thanks
Another question, installing your kernel still I pass SafetyNet in magisk?
TIA
Harlock1978 said:
Another question, installing your kernel still I pass SafetyNet in magisk?
TIA
Click to expand...
Click to collapse
Everything is working good but if u have september+ patch u will get USSD code error.
About wipe: just click here and swipe.
Thank you, I have the latest firmware installed (.376) so I think if I installed this kernel I will have the USSD error.
If I flash this, will I continue to get OTA updates?
I have TWRP from Pretoriano-twrp_p10_lite_0.4.img. Can i flash this kernel? One more thing if i want to back to stock kernel its possible? Thanks in advance.
noslen69 said:
I have TWRP from Pretoriano-twrp_p10_lite_0.4.img. Can i flash this kernel? One more thing if i want to back to stock kernel its possible? Thanks in advance.
Click to expand...
Click to collapse
Yes and yes.
Who i make to reverte back to stock kernel? Thanks for the help. I make this questions because i am afraid to make something wrong and i have only this phone.
noslen69 said:
Who i make to reverte back to stock kernel? Thanks for the help. I make this questions because i am afraid to make something wrong and i have only this phone.
Click to expand...
Click to collapse
You have stock kernel on team pheanom blog I downloaded it and if u can't find I will upload...
nemanjsb said:
You have stock kernel on team pheanom blog I downloaded it and if u can't find I will upload...
Click to expand...
Click to collapse
One last question, i am in stock rom 8.0 i have F2FS data partition or i have to do something before flash the kernel.
Please upload the stock kernel. Thanks for you help.
noslen69 said:
One last question, i am in stock rom 8.0 i have F2FS data partition or i have to do something before flash the kernel.
Please upload the stock kernel. Thanks for you help.
Click to expand...
Click to collapse
Bootloader unlocked?
Stock kernel
nemanjsb said:
Bootloader unlocked?
Stock kernel
Click to expand...
Click to collapse
Yes unlocked. And stock kernel.
noslen69 said:
Yes unlocked. And stock kernel.
Click to expand...
Click to collapse
It's ok go on.
nemanjsb said:
It's ok go on.
Click to expand...
Click to collapse
I flash it everything ok. Looks like its a bitte more slow. Can i do something, do we have any settings? Another thing do you know any Google camera that works whit our phone. Thanks for your help.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Features
I/O Schedulers (these were actually added in upstream kernel source)
BFQ
CFQ
DEADLINE
FIOPS
NOOP
ROW [DEFAULT]
ZEN
CPU hotplugs: intelli_plug (ENABLED BY DEFAULT)
CPU thermal control: intellithermal (ENABLED BY DEFAULT)
Governors
conservative
elementalX
intelliactive
interactive
ondemand
powersave
performance
zzmoove [DEFAULT, profile: 3 (ybatext)]
CPU
Support for Multi-Core Power Saving, reduce CPU usage (available in CPU tab of Kernel Adiutor).
Reduced CPU Average-Load drastically (Less CPU-Load=Cool Device=More Battery-Life).
Support userspace CPU voltage controlling
GPU
Support for Adreno Idler algorithm, reduce high GPU frequencies usage for better battery performance
Support for Simple GPU Algorithm
Memory
Support for Adaptive Low Memory Killer (ALMK) (kill any process that cause thrashing scenario)
Support for Kernel Samepage Merging (KSM).
Support for zRAM compression algorithm (updated to upstream Linux 4.8)
Support for LZ4HC (LZ4 high-compression rate) compression algorithm for zRAM
Other tweaks and optimizations
Init.d support
Support Faux Sound Control (use Faux Sound app to set audio gain profiles)
Optimized Integer SQRT. for upto 3x faster operation.
OVERCLOCKED CPU to 2,5GHz
Westwood TCP congestion algorithm (small boost on network speed)
Hacked swappiness up to 200 by using hacks from Samsung kernel sources (default swappiness is 130)
SELinux Permissive (for V4A and etc...)
Disabled some battery-hogging WAKELOCKS
Support zswap for better memory compression
Double Tap 2 Wake (default off)
Download
RZ kernel v3.5 for Amami PIE
RZ kernel v3.0.2 for Amami OREO
RZ_kernel_v3.0_Amami_Android_NOUGAT
Click to expand...
Click to collapse
Supported ROMs:
AICP 14.0
AICP 13.1
Lineage 15.1
ROMs on based Lineage OS 14.1 (use version for Android N)
Source code: https://github.com/remilia15/android_kernel_sony_msm8974
XDA:DevDB Information
RZ Kernel, Kernel for the Sony Xperia Z1 Compact
Contributors
raschad, remilia15
Kernel Special Features:
Version Information
Status: Beta
Beta Release Date: 2018-10-25
Created 2018-10-25
Last Updated 2019-02-02
Changelogs
v3.0.2
- Updated display driver for non-original screens
- The use of full source code provided an increase in CPU up to 2.5 GHz maximum (as originally planned)
- Min GPU 27 MHz ( less battery consumption is expected)
Is this kernel going to work with AICP or its for stock?
zlata said:
Is this kernel going to work with AICP or its for stock?
Click to expand...
Click to collapse
Should work on AICP 14.0
Update v3.0.2
- Updated display driver for non-original screens
- The use of full source code provided an increase in CPU up to 2.5 GHz maximum (as originally planned)
- Min GPU 27 MHz ( less battery consumption is expected)
The kernel should work on all N, O and P ROMs for sure, as it's based on my Sony msm8974 fork, which Z1 has all those capabilities
Does the kernel work on Android 9?
Does the kernel work on Android 9? I tried to put, after the installation got a black screen.
Slavintir said:
Does the kernel work on Android 9? I tried to put, after the installation got a black screen.
Click to expand...
Click to collapse
Yes, it works on android 9 (AICP 14.0)
Here are the results
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
raschad said:
Yes, it works on android 9 (AICP 14.0)
Here are the results
View attachment 4630649View attachment 4630650
Click to expand...
Click to collapse
The screen is not native, is it a problem? Do you think this can be fixed?
After the kernel firmware there is no image.
TWRP also black screen, version 3.0.1
After reinstalling, TWRP works, but the firmware does not load (black screen).
But if you connect the charging cable, charging is displayed on the screen.
Slavintir said:
The screen is not native, is it a problem? Do you think this can be fixed?
After the kernel firmware there is no image.
TWRP also black screen, version 3.0.1
After reinstalling, TWRP works, but the firmware does not load (black screen).
But if you connect the charging cable, charging is displayed on the screen.
Click to expand...
Click to collapse
I used the fixed display drivers to make the non-original screen work ( Changed the kernel sources are based on changes SpiritCroc)
What kernel version do you install? And what's your ROM?
raschad said:
I used the fixed display drivers to make the non-original screen work ( Changed the kernel sources are based on changes SpiritCroc)
What kernel version do you install? And what's your ROM?
Click to expand...
Click to collapse
I am using AICP 14.0
TWRP version 3.0.1
screenshot:
https://1drv.ms/u/s!AmjNpI2xsRY2gaN8hf2ChbYWg9__hg
Slavintir said:
I am using AICP 14.0
TWRP version 3.0.1
screenshot:
https://1drv.ms/u/s!AmjNpI2xsRY2gaN8hf2ChbYWg9__hg
Click to expand...
Click to collapse
Strange, but this is kernel tested on this ROM and everything is working.
Did you install Magisk? You try again flash ROM without wipe, then flash RZ-kernel.
raschad said:
Strange, but this is kernel tested on this ROM and everything is working.
Did you install Magisk? You try again flash ROM without wipe, then flash RZ-kernel.
Click to expand...
Click to collapse
Okay, if it doesn't work, I'll send a link to the video how it happens.
Best settings ?
First, thanks for your work, everything works fine, I've got no issue on AICP 8.1. :highfive:
I was wondering if you can give a profile or the best setting for more batterie saving pls
lukstheboss said:
First, thanks for your work, everything works fine, I've got no issue on AICP 8.1. :highfive:
I was wondering if you can give a profile or the best setting for more batterie saving pls
Click to expand...
Click to collapse
I've tried this kernel on AICP 8.1 and my phone doesn't get past the Sony logo with a couple of restarts until there.
firestone9x said:
I've tried this kernel on AICP 8.1 and my phone doesn't get past the Sony logo with a couple of restarts until there.
Click to expand...
Click to collapse
Yeah me too, seems to not work with the latest update
But worked with older builds
On my z1compact i got a black screen (no Sony logo) how to fix this, my display is original aicp 14.1
sorry noob questions , N zip is for N android and the other one for M/O ? just flash it with twrp ?
JIJOK said:
sorry noob questions , N zip is for N android and the other one for M/O ? just flash it with twrp ?
Click to expand...
Click to collapse
First version for Android Oreo and Pie
Version N only for Nougat
raschad said:
First version for Android Oreo and Pie
Version N only for Nougat
Click to expand...
Click to collapse
Another one ( sorry ) now to use features I need a kernel manager, right ? Kernel Adiutor I guess or what would you recommend me ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C.A.F 4.9 KERNEL
What is this kernel ?
This Kernel is designed for stability , security optimized as possible with latest caf tag update .
What is features included in this Kernel ?
driver stable from daisy-o-oss in majority ( exept peelir and touchscreen... )
majority change driver come from : @33bca & @rama982
latest CAF Kernel from LA.UM.8.6.2.r1-07800-89xx.0
latest Prima WLAN LA.UM.8.6.2.r1-07800-89xx.0
latest Techpack audio LA.UM.8.6.2.r1-07800-89xx.0
compiled witch latest proton-clang 11 release
upstreamed to 4.9.231
-fp fpc/goodix gestures
-dt2w enabled for all screen !
*underclock clock GPU 19mhz
*GPU timeout 62s
*ttl support
*full support ipv6
*lz4 zram enabled
*governor cpu available : schedutil , powersave , performance
*schedutil governor improved ( cleaned and added lot commit linaro )
*cpufreq fix linaro
*exfat support
*scheduler i/o available :
- cfq (enabled in default ) , bfq , deadline , noop
*thermal change
*vdso32
*TCP congestion controller available:
TCP BIC
TCP CUBIC ( default enabled )
TCP WESTWOOD
TCP HTCP
TCP HSTCP
TCP HYBLA
TCP VEGAS
TCP NV
TCP SCALABLE
TCP LP
TCP VENO
TCP YEAH
TCP ILLINOIS
TCP DCTCP
TCP CDG
TCP BBR ( commit fix added )
*franco cpu-boost & Pull in Modified version for EAS cpu-boost
*touchboost option ( disabled in default )
*Wakelock blocker { block list enabled by nathanchance and franco }
*devfreq optimization
*sched optimization
*genirq optimization
*cpuidle / s2idle optimization
and probably more check sources for more information about features and change ...
Compatible Systems with this Kernel
This kernel is only compatible for Android 10 custom rom !
Stock android 10.0 and gsi from @phhusson is no supported , all stock vendor no support kernel 4.9 also !
DOWNLOAD
This Kernel will receive updates with new CAF tags and new upstream
Guide Install :
Boot into TWRP recovery
Flash the Kernel ZIP file & re-flash magisk if installed
wipe dalvik-cache & Reboot to System- enjoy!
Thanks for :
Xiaomi kernel sources
Code Aurora forum for caf 4.9 release
@rama982
@33bca
@krasCGQ
-and all other no mentionned in sources
XDAevDB Information
C.A.F Kernel 4.9 for Mi a2 lite and Redmi 6 pro (daisy / sakura)
Contributors :
@ada12
Source Code: https://github.com/RebornDaisyProject/daisy_msm8953/
Status: Stable
Update 13/06/2020 :
*everything is rebased check post
Update 24/06/2020 :
*big changelog see here : https://pastebin.com/z7zR7T6q
Update 29/06/2020 :
*changelog >>> https://del.dog/celytuconi.txt
Update 23/07/2020 :
*changelog >>> https://del.dog/yuworfimyk.txt
OMG... A powerful kernel!
Thanks guy
Thank you! need miui version ! ^^
miui cant support kernel 4.9 sadly same as stock vendor ! no video codec, cant take camera record and no fp fpc its need custom vendor ...
alcopsy said:
Thank you! need miui version ! ^^
Click to expand...
Click to collapse
Now installed on my phone with POSP on it. So far it's good.
good work <3
this kernel normally working with pexel experience rom with android 10?
After switch mobile data in other sim needs reboot phone for eneble mobile data
That bug is due to your rom ( trees sources ) . report to your maintener rom witch full log for help dev
andrey1981 said:
After switch mobile data in other sim needs reboot phone for eneble mobile data
Click to expand...
Click to collapse
This kernel is compatible witch all rom custom android 10.0
andrey1981 said:
this kernel normally working with pexel experience rom with android 10?
Click to expand...
Click to collapse
Which governor in this kernel saves maximum energy?
dt2w function not working in hx8399c touch panel in this kernel.
Other functuinons working normal.
thanks for great work!
Please fix dt2w for hx8399c touch panel for Redmi 6pro.
blu_schedutil save more energy ...
about hx8399c touch panel, thanks for report I will look on it for add
andrey1981 said:
Which governor in this kernel saves maximum energy?
dt2w function not working in hx8399c touch panel in this kernel.
Other functuinons working normal.
thanks for great work!
Please fix dt2w for hx8399c touch panel for Redmi 6pro.
Click to expand...
Click to collapse
ada12 said:
blu_schedutil save more energy ...
about hx8399c touch panel, thanks for report I will look on it for add
Click to expand...
Click to collapse
hx8399c doesn't work on many kustom roms and kernels. in stock miui work normal. this is original xiaomi panel
View attachment 4935969
ok... maybe driver no shared by xiaomi like fts before , If I find driver I tell you
andrey1981 said:
hx8399c doesn't work on many kustom roms and kernels. in stock miui work normal. this is original xiaomi panel
View attachment 4935969
Click to expand...
Click to collapse
Thanks bro, in latest kernel dt2w normal working with hx8399c.
Great work!!!
where are you take this driver?
Hi,
thanks for ur work.
My concern is unexpected shutdown. When battery gets old phone shutdowns himself at %30 battery level or so. Apple fixed it with reducing overall system power draw. At least we can play with Cpu voltages using these kernels. Can you develop simple button for it?
More info
1- https://forum.xda-developers.com/android/help/android-fail-safe-unexpected-shutdown-t4042257
2- https://support.apple.com/en-us/HT208387
3- Xiaomi Mi A2 Lite user experiencing unexpected shutdown.
https://www.reddit.com/r/Xiaomi/comments/eueg14/battery_problems/
1- For have better life battery, you can use battery charge limit [Root] app for limit your charge to 80%
2- in custom version kernel from Smartpack kernel manager you can set all perfctl value to -10mv for good undervolting phone
perfect_ said:
Hi,
thanks for ur work.
My concern is unexpected shutdown. When battery gets old phone shutdowns himself at %30 battery level or so. Apple fixed it with reducing overall system power draw. At least we can play with Cpu voltages using these kernels. Can you develop simple button for it?
More info
1- https://forum.xda-developers.com/android/help/android-fail-safe-unexpected-shutdown-t4042257
2- https://support.apple.com/en-us/HT208387
3- Xiaomi Mi A2 Lite user experiencing unexpected shutdown.
https://www.reddit.com/r/Xiaomi/comments/eueg14/battery_problems/
Click to expand...
Click to collapse
Update 23/02/2020 :
*ainur sound enabled
*state notifier
*voltage controls setting ( no default under )
*arm64: msm8953-regulator: >Optimized the regulator for good performance
*oc cpu 2152 mhz and oc 2208mhz
*oc gpu 725mhz
*under 19mhz gpu
*TTL fix
*lz4 zram updated and set in default
*adreno idler
*added 4 governor eas :
blu_schedutil
pixutil
smurfutil
pixel_smurfutil
waiting 4.9.215 OC version...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 5330295
aRise Kernel X2 is here for Alioth!
Initial Changelog:
- Based on Lineage Kernel
- Upstreamed to 4.19.225
- Added WireGuard Support
- Introduced Simple Low Memory Killer(And Tweaked Them)
- crypto and x86 BACKPORTS and UPSTREAMS
- kgsl BACKPORTS (To match with Fuse)
- Use 100Hz tick Rate (300Hz its too much)
- Fix in some roms vibration doesn't work
- Some Idle optimizations
- Nuked Binder Logspams
- Ext4: Fsync: Optimize Double-fsync() a bunch
- Fixed in China Miui blobs based roms wif i not working
- Kill Userspace CPU Boosting entirely
- lz4: Removed unused functions
- Fixed Alioth not changing volume levels with Headphones on
- Add cpu7 Max frequency for Sd870
- locking/rwsem BACKPORTS
- UnderVolt 670Mhz
- Introduced Dynamic Stune Boost
- Introduced Stune Assist
- Reduced alot of Latency (Smoother)
Downloads:
Download
Support Group
JOIN HERE <-- Discussion group for support
Credits:
- Thx to SM8250 https://github.com/xiaomi-sm8250-devs/android_kernel_xiaomi_sm8250 for source
- Thx to all testers
XDAevDB Information
neXus Kernel, Kernel for Poco F3
Contributors
Zeeta
Source Code: https://github.com/xiaomi-sm8250-devs/android_kernel_xiaomi_sm8250
neXus Source: https://github.com/NotZeetaa/android_kernel_xiaomi_sm8250
Version Information
Status: STABLE
Current Stable Version: Public Stable 1
Created 2021-11-20
Last Updated 2022-01-18
@Zeetaa thnx man - going to give it a try as well
raystef66 said:
@Zeetaa thnx man - going to give it a try as well
Click to expand...
Click to collapse
Enjoy!
Zeetaa said:
Enjoy!
Click to expand...
Click to collapse
Will be tested in our TG group
Just flashed it.. I'll see how it goes
Thank you!!
nikosrs4 said:
Just flashed it.. I'll see how it goes
Thank you!!
Click to expand...
Click to collapse
Pls give some review to improve better and better
All look good thus far! I'm in the middle of searching what causes my phone to reboot while charging for some weeks now, one thing to do was flashing another kernel but no luck
Apart from my issue, phone is very snappy, no hiccups at all. Idle drain looks great. All functions work as they should, BT with smartwatch and car display. Stable wifi and data connection, stable GPS.
So all good!!
I will try this for a while but on the first run everything is good and get one of the best result on geekbench.
It is working fine for me but I think it is messing the otg flash drive. it is always "the disk need to be check" something after I used my otg so I can't use it the next time. It's fine though when I'm on OD kernel.
@Zeetaa
Thanks for your kernel!
I installed your kernel (+ BatterySaverModV1.1 flashed with Magisk) yesterday and can now compare it with ODK 11.21 (based on Immensity) regarding battery consumption.
I use a standardized scenario that always runs the same and roughly corresponds to my usage. Touch interaction (browsing, messaging) is completely missing in the scenario, because that is difficult to standardize (for me).
Full charge to 100%.
1hr NewPipe (WiFi, always the same video)
1hr call (LTE)
1hr video recording
8hrs idle (in flight mode)
1hr NewPipe (WiFi, always the same video)
2hrs Idle (Cell standby)
All timings are exact. The phone is always at the same place and in the same position. The brightness of the display is always the same. Apps that I do not actively use are frozen. A triggered autostart of these apps is prevented. The OS of the phone is Havoc 4.11. I note the battery level after each step.
Results
Unfortunately, I can't tell yet if it's because of the kernel or the installed mod, but the consumption is slightly higher than ODK, espacially in idle mode. The difference isn't huge, but noticeable.
In the 8hrs that the phone was idle and in flight mode, it consumed 2% with Nexus, but 0% with ODK.
At the end of the scenario, 66% of the battery was left (70% with ODK).
I will test tonight how my phone behaves when I use the BatteryMod together with ODK. Then I will see the influence of the mod.
I agree with @esszett conclusion, while we do have the same result on benchmark and gaming. The battery is worst than OD 11.25 (I am using AICP)
Hey, could one of you please send a link to that batterysavermod? Thanks.
@Zeetaa
Yesterday I started the new scenario with ODK (11.25) and BatterySaverMod. What I can say so far: It is the Nexus kernel that causes the higher drain, not the BatterySaverMod. However, whatever the BatterySaverMod does in detail, it has no effect on my battery in my usage pattern.
fadedave said:
Hey, could one of you please send a link to that batterysavermod? Thanks.
Click to expand...
Click to collapse
You can find it in the Telegram support group. I think I'm not allowed to share an external link to it.
Sry I dont use batterysavermode @Zeetaa
blasev said:
I will try this for a while but on the first run everything is good and get one of the best result on geekbench.
Click to expand...
Click to collapse
nikosrs4 said:
All look good thus far! I'm in the middle of searching what causes my phone to reboot while charging for some weeks now, one thing to do was flashing another kernel but no luck
Apart from my issue, phone is very snappy, no hiccups at all. Idle drain looks great. All functions work as they should, BT with smartwatch and car display. Stable wifi and data connection, stable GPS.
So all good!!
Click to expand...
Click to collapse
Thx for the feedback
aRise Kernel X1 is here for Alioth!
Initial Changelog:
- Based on Lineage Kernel
- Merged Linux 4.19.221
- Introduced KProfiles(Use #kprofile in group)
- Switched to Proton Clang
- Don't let Google Camera run in the background(Avoid 100% Cpu)
- Disable readahead by default
- Introduced Efficient Frequencys with a new energy model
- Introduced Schedhorizon(Thx to libxzr)
- Disable I/O stats
- Disabled Cpu Boost (We are using Cib Now)
- Use schedutil rate-limits from Pixel 3
- Switch sched scaling to linear(Improves Performance)
- Use 100Hz Tick Rate
- Introduced Dc Dimming
- zRam Backports and Optimizations
- Enabled zRam Write Back
- Increase vmstat interval to 20 seconds(Less Jitter)
- mm: Optimizations
- Nuked alot of logspams
Downloads:
Download
Support Group
JOIN HERE <-- Discussion group for support
Credits:
- Thx to SM8250 https://github.com/xiaomi-sm8250-devs/android_kernel_xiaomi_sm8250 for source
- Thx to all testers
XDAevDB Information
neXus Kernel, Kernel for Poco F2 Pro
Contributors
Zeeta
Source Code: https://github.com/xiaomi-sm8250-devs/android_kernel_xiaomi_sm8250
neXus Source: https://github.com/NotZeetaa/android_kernel_xiaomi_sm8250
Version Information
Status: STABLE
Current Stable Version: Public Stable 1
Created 2021-11-20
Last Updated 2021-12-14
thanks for this kernel just one question does flashing this kernel detect Magisk if installed and automatically patch boot image like drunk kernel after flashing or I have to flash Magisk after kernel flashing thanks.
Zeetaa said:
View attachment 5482465
aRise Kernel X1 is here for Alioth!
Initial Changelog:
- Based on Lineage Kernel
- Merged Linux 4.19.221
- Introduced KProfiles(Use #kprofile in group)
- Switched to Proton Clang
- Don't let Google Camera run in the background(Avoid 100% Cpu)
- Disable readahead by default
- Introduced Efficient Frequencys with a new energy model
- Introduced Schedhorizon(Thx to libxzr)
- Disable I/O stats
- Disabled Cpu Boost (We are using Cib Now)
- Use schedutil rate-limits from Pixel 3
- Switch sched scaling to linear(Improves Performance)
- Use 100Hz Tick Rate
- Introduced Dc Dimming
- zRam Backports and Optimizations
- Enabled zRam Write Back
- Increase vmstat interval to 20 seconds(Less Jitter)
- mm: Optimizations
- Nuked alot of logspams
Downloads:
Download
Support Group
JOIN HERE <-- Discussion group for support
Credits:
- Thx to SM8250 https://github.com/xiaomi-sm8250-devs/android_kernel_xiaomi_sm8250 for source
- Thx to all testers
XDAevDB Information
neXus Kernel, Kernel for Poco F2 Pro
Contributors
Zeeta
Source Code: https://github.com/xiaomi-sm8250-devs/android_kernel_xiaomi_sm8250
neXus Source: https://github.com/NotZeetaa/android_kernel_xiaomi_sm8250
Version Information
Status: STABLE
Current Stable Version: Public Stable 1
Created 2021-11-20
Last Updated 2021-12-14
Click to expand...
Click to collapse
Will it have any improvement in the battery
ale82to said:
thanks for this kernel just one question does flashing this kernel detect Magisk if installed and automatically patch boot image like drunk kernel after flashing or I have to flash Magisk after kernel flashing thanks.
Click to expand...
Click to collapse
Yes
How to enable/disable dc dimming?