Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Features
I/O Schedulers (these were actually added in upstream kernel source)
BFQ
CFQ
DEADLINE
FIOPS
NOOP
ROW [DEFAULT]
ZEN
CPU hotplugs: intelli_plug (ENABLED BY DEFAULT)
CPU thermal control: intellithermal (ENABLED BY DEFAULT)
Governors
conservative
elementalX
intelliactive
interactive
ondemand
powersave
performance
zzmoove [DEFAULT, profile: 3 (ybatext)]
CPU
Support for Multi-Core Power Saving, reduce CPU usage (available in CPU tab of Kernel Adiutor).
Reduced CPU Average-Load drastically (Less CPU-Load=Cool Device=More Battery-Life).
Support userspace CPU voltage controlling
GPU
Support for Adreno Idler algorithm, reduce high GPU frequencies usage for better battery performance
Support for Simple GPU Algorithm
Memory
Support for Adaptive Low Memory Killer (ALMK) (kill any process that cause thrashing scenario)
Support for Kernel Samepage Merging (KSM).
Support for zRAM compression algorithm (updated to upstream Linux 4.8)
Support for LZ4HC (LZ4 high-compression rate) compression algorithm for zRAM
Other tweaks and optimizations
Init.d support
Support Faux Sound Control (use Faux Sound app to set audio gain profiles)
Optimized Integer SQRT. for upto 3x faster operation.
OVERCLOCKED CPU to 2,5GHz
Westwood TCP congestion algorithm (small boost on network speed)
Hacked swappiness up to 200 by using hacks from Samsung kernel sources (default swappiness is 130)
SELinux Permissive (for V4A and etc...)
Disabled some battery-hogging WAKELOCKS
Support zswap for better memory compression
Double Tap 2 Wake (default off)
Download
RZ kernel v3.5 for Amami PIE
RZ kernel v3.0.2 for Amami OREO
RZ_kernel_v3.0_Amami_Android_NOUGAT
Click to expand...
Click to collapse
Supported ROMs:
AICP 14.0
AICP 13.1
Lineage 15.1
ROMs on based Lineage OS 14.1 (use version for Android N)
Source code: https://github.com/remilia15/android_kernel_sony_msm8974
XDA:DevDB Information
RZ Kernel, Kernel for the Sony Xperia Z1 Compact
Contributors
raschad, remilia15
Kernel Special Features:
Version Information
Status: Beta
Beta Release Date: 2018-10-25
Created 2018-10-25
Last Updated 2019-02-02
Changelogs
v3.0.2
- Updated display driver for non-original screens
- The use of full source code provided an increase in CPU up to 2.5 GHz maximum (as originally planned)
- Min GPU 27 MHz ( less battery consumption is expected)
Is this kernel going to work with AICP or its for stock?
zlata said:
Is this kernel going to work with AICP or its for stock?
Click to expand...
Click to collapse
Should work on AICP 14.0
Update v3.0.2
- Updated display driver for non-original screens
- The use of full source code provided an increase in CPU up to 2.5 GHz maximum (as originally planned)
- Min GPU 27 MHz ( less battery consumption is expected)
The kernel should work on all N, O and P ROMs for sure, as it's based on my Sony msm8974 fork, which Z1 has all those capabilities
Does the kernel work on Android 9?
Does the kernel work on Android 9? I tried to put, after the installation got a black screen.
Slavintir said:
Does the kernel work on Android 9? I tried to put, after the installation got a black screen.
Click to expand...
Click to collapse
Yes, it works on android 9 (AICP 14.0)
Here are the results
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
raschad said:
Yes, it works on android 9 (AICP 14.0)
Here are the results
View attachment 4630649View attachment 4630650
Click to expand...
Click to collapse
The screen is not native, is it a problem? Do you think this can be fixed?
After the kernel firmware there is no image.
TWRP also black screen, version 3.0.1
After reinstalling, TWRP works, but the firmware does not load (black screen).
But if you connect the charging cable, charging is displayed on the screen.
Slavintir said:
The screen is not native, is it a problem? Do you think this can be fixed?
After the kernel firmware there is no image.
TWRP also black screen, version 3.0.1
After reinstalling, TWRP works, but the firmware does not load (black screen).
But if you connect the charging cable, charging is displayed on the screen.
Click to expand...
Click to collapse
I used the fixed display drivers to make the non-original screen work ( Changed the kernel sources are based on changes SpiritCroc)
What kernel version do you install? And what's your ROM?
raschad said:
I used the fixed display drivers to make the non-original screen work ( Changed the kernel sources are based on changes SpiritCroc)
What kernel version do you install? And what's your ROM?
Click to expand...
Click to collapse
I am using AICP 14.0
TWRP version 3.0.1
screenshot:
https://1drv.ms/u/s!AmjNpI2xsRY2gaN8hf2ChbYWg9__hg
Slavintir said:
I am using AICP 14.0
TWRP version 3.0.1
screenshot:
https://1drv.ms/u/s!AmjNpI2xsRY2gaN8hf2ChbYWg9__hg
Click to expand...
Click to collapse
Strange, but this is kernel tested on this ROM and everything is working.
Did you install Magisk? You try again flash ROM without wipe, then flash RZ-kernel.
raschad said:
Strange, but this is kernel tested on this ROM and everything is working.
Did you install Magisk? You try again flash ROM without wipe, then flash RZ-kernel.
Click to expand...
Click to collapse
Okay, if it doesn't work, I'll send a link to the video how it happens.
Best settings ?
First, thanks for your work, everything works fine, I've got no issue on AICP 8.1. :highfive:
I was wondering if you can give a profile or the best setting for more batterie saving pls
lukstheboss said:
First, thanks for your work, everything works fine, I've got no issue on AICP 8.1. :highfive:
I was wondering if you can give a profile or the best setting for more batterie saving pls
Click to expand...
Click to collapse
I've tried this kernel on AICP 8.1 and my phone doesn't get past the Sony logo with a couple of restarts until there.
firestone9x said:
I've tried this kernel on AICP 8.1 and my phone doesn't get past the Sony logo with a couple of restarts until there.
Click to expand...
Click to collapse
Yeah me too, seems to not work with the latest update
But worked with older builds
On my z1compact i got a black screen (no Sony logo) how to fix this, my display is original aicp 14.1
sorry noob questions , N zip is for N android and the other one for M/O ? just flash it with twrp ?
JIJOK said:
sorry noob questions , N zip is for N android and the other one for M/O ? just flash it with twrp ?
Click to expand...
Click to collapse
First version for Android Oreo and Pie
Version N only for Nougat
raschad said:
First version for Android Oreo and Pie
Version N only for Nougat
Click to expand...
Click to collapse
Another one ( sorry ) now to use features I need a kernel manager, right ? Kernel Adiutor I guess or what would you recommend me ?
Related
Optimus Kernel
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on lollipop roms only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Enjoy!
Note: This kernel is for Moto G 2014 only(TITAN). Don't flash it on other devices
Custom Features:
- Updated to latest CM12.1 Sources
- Bumped to 3.4.109
- Compiled With Custom Uber 5.2 Toolchain
- Compiled With -O3 & Graphite Flags
- Compiled With Strict-Aliasing & Cortex A7 Tweaks
- ARM v7 Optimizations
- Replaced Qcom's hotplug binary with msm_mpdecision (aka bricked hotplug, better battery life + performance)
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- DoubleTap2Wake & Sweep2Wake
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- IntelliThermal V2 by Faux
- Adreno Idler Algorithm
- State Notifier Driver by Neobuddy89
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
You need ROM's default kernel before flashing this. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.Pls reboot after tweaking the kernel.
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
DOWNLOADS:
AndroidFileHost
PLS DON'T MIRROR THE LINKS
Recommended app:
Kernel Adiutor or Synapse
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store
Credits : (In no specific order,pls pm me if i missed someone)
faux123
Cl3Kener
savoca
Anas Karbila
pinkflozd
YoshiShaPow
DC07
luca020400
And more
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G 2014
Contributors
Flashhhh
Source Code: https://github.com/desaishivam26/Optimus_Reborn
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: R1
Beta Release Date: 2015-04-24
Created 2015-04-24
Last Updated 2015-09-30
Mine!
One More!!
Good to see this awesome kernel on our Titan!!
Anas Karbila said:
Good to see this awesome kernel on our Titan!!
Click to expand...
Click to collapse
Oh lol Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It just booted fine. Going to do some fine tuning with kernel Adiutor now!
Sent from my XT1068 using Tapatalk.
Brilliant! Gonna flash it right away!!!
Can this be used on Stock based roms ?
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
observingi said:
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
Click to expand...
Click to collapse
Impulse or yankactive
zakee94 said:
Can this be used on Stock based roms ?
Click to expand...
Click to collapse
NO
Will it work on Stock based 5.0.2? More specific TP? Thanks
ptambo91 said:
Will it work on Stock based 5.0.2? More specific TP? Thanks
Click to expand...
Click to collapse
seriously where you too lazy to read 1 post above yours -_-
If this kernel won't work on Stock based ROMs it would be good to mention it in OP... @Flashhhh @Shawn5162
ptambo91 said:
Will it work on Stock based 5.0.2? More specific TP? Thanks
Click to expand...
Click to collapse
No it won't work. It's for CM12 and AOSP roms only
zakee94 said:
If this kernel won't work on Stock based ROMs it would be good to mention it in OP... @Flashhhh @Shawn5162
Click to expand...
Click to collapse
Already updated the OP.
I'm sorry ... ten minutes ago... I'm working and I didn't realize to refresh page. My bad.
observingi said:
No install hiccups, running smoothly.
BTW, which governor gives a better battery life, not compromising on the performance extensively, but little above balanced?
Thanks
Click to expand...
Click to collapse
I recommend smartmax governor for that
smitharro said:
View attachment 3279459
It just booted fine. Going to do some fine tuning with kernel Adiutor now!
Sent from my XT1068 using Tapatalk.
Click to expand...
Click to collapse
All set up now! I really was on the lookout for a kernel like this! Hope it is as stable as it promises to be.
Sent from my XT1068 using Tapatalk.
im testing this right now with reccommended settings, post my benchmark scores later
scores 18608
If you guys have other settings to reach the full potential of the hardware with great battery life please post :angel:
Works Fine and fast....
CPU underclocking is THE BEST
I have a doubt : Under the Hotplug[CPU] Should the MPDecision be Enabled for the kernel addon MSM MPDecision Hotplug to work? ALSO should i Disable faux's Intelliplug?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Llama Sweet For AOSP
Code:
/* *** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* BOOM goes the Dynamite
*/
I just started Developement (since early 2015) i have a lot to learn but i want to share that i already learn. The main goal of this kernel is performance and battery life as well as user friendliness.
Rules
1. if you have any issue do some research before posting
2. I want Respect, No troll and limited off-topic
Let's talk about that big baby
FEATURES
-Built with ubertc 6.0 linaro toolchain
- Based on Boeffla Works
- Powersuspend
- Modified MPdecision and Intelliplug from faux
- Intellithermal
- Intelliactive and IntelliMM from Faux
- FIOPS, ROW, BFQ-v7, SIO, DEADLINE, NOOP, CFQ Schedulers
- More governor
- Sound Control
- Frandom
- USB Fast Charge (ON/OFF Toggle)
- New LZ4 Compressor
- Dynamic FSync
- Kcal driver
- Simple GPU Algorithm
- Kexec Hardboot
- Working dt2w
- What you ask !
For kernel tuning i recommand you to flash UKM and use Synapse on google play store
INSTRUCTION
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip corresponding to your variant
* Reboot
Download
LP Download
Thanks
I would like to thanks every developer that help me RenderBroken, REV3NT3CH, Lord Boeffla , Dorimanx, Neobuddy89, Savoca, Faux123, and Many More!
And of course every user that enjoy this kernel and every donators
XDA:DevDB Information
[KERNEL][5.1][CAF] Llama Sweet kernel , ROM for the LG G2
Contributors
genesixxbf3
Source Code: https://github.com/LlamaOpenSourceProject/msm8974_caf_G2
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CAF
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2015-05-31
Last Updated 2015-06-13
Reserved
Personal setting (soon as i know how to do i'll make them as default) :
CPU MAX FREQ 1497 MHz
CPU MULTICORE POWER SAVING aggressive
CPU GOV Nightmare
ENABLE Intellithermal (IMPORTANT)
CPU VOLT -20
IO Read-Ahead size 2048 KB and Scheduler ZEN
GPU GOV simple_ondemand
Sound +3 for Headset boost and +2 for Speaker boost
POWER SUSPEND kernel mode
FAST CHARGE enable
WIFI SCAN interval 150 sec
Reserved
Credit for the logo to @electrikjesus
Habemus Llama Kernel!
Any reason behind using the max at 1497 ?
dharani1234 said:
Any reason behind using the max at 1497 ?
Click to expand...
Click to collapse
for more battery life
genesixxbf3 said:
for more battery life
Click to expand...
Click to collapse
K .. that's what I thought .. but I feel that browsing slows down when you set it to that low. I use 1958 MHz
Thanks for the quick response .
802= stuck on LG Logo
Gesendet von meinem LG-D802 mit Tapatalk
It is a great work .And I want to know that it can use for blisspop , remix and CM12.1?All my best .
energizer5680 said:
802= stuck on LG Logo
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
Are you sure you are on a CAF 5.1 ROM? It works here fine on my D802
liusi522 said:
It is a great work .And I want to know that it can use for blisspop , remix and CM12.1?All my best .
Click to expand...
Click to collapse
If they are based on CAF and android 5.1.X then it should work fine. If you are using a non CAF ROM then you will encounter that it will not boot or inverted display etc.
wulsic said:
Are you sure you are on a CAF 5.1 ROM? It works here fine on my D802
If they are based on CAF and android 5.1.X then it should work fine. If you are using a non CAF ROM then you will encounter that it will not boot or inverted display etc.
Click to expand...
Click to collapse
Understand, thank you for your answer and your kernel.
liusi522 said:
It is a great work .And I want to know that it can use for blisspop , remix and CM12.1?All my best .
Click to expand...
Click to collapse
make sure they are CAF (ok for bliss and remix )
energizer5680 said:
802= stuck on LG Logo
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
Great logs and information.
Thank you for your work, just asking if it works with thishttp://forum.xda-developers.com/lg-g2/development/cm12-1-caf-5-1-1-variants-dt2w-t3122206rom?
Yes it should work with http://forum.xda-developers.com/lg-g2/development/cm12-1-caf-5-1-1-variants-dt2w-t3122206rom?
wulsic said:
Are you sure you are on a CAF 5.1 ROM? It works here fine on my D802
If they are based on CAF and android 5.1.X then it should work fine. If you are using a non CAF ROM then you will encounter that it will not boot or inverted display etc.
Click to expand...
Click to collapse
Thanks for your answer. What do you mean with CAF? I'm on Blisspop v3.3; 5.1.1
D803 will not be until there is source code Lollipop for him?
So blisspop 3.4 Compatible ? Is it the same kernel as in blisspop 3.4 ?
Can I use kernel auditore or should I remove it and use synapse?
---------- Post added at 05:53 PM ---------- Previous post was at 05:47 PM ----------
energizer5680 said:
Thanks for your answer. What do you mean with CAF? I'm on Blisspop v3.3; 5.1.1
Click to expand...
Click to collapse
Caf means that the kernel is on lollipop source, lollipop modem bootstack and so.
As far as I know blisspop 3.3 is not caf cause it's on jb boot stack
vitök said:
So blisspop 3.4 Compatible ? Is it the same kernel as in blisspop 3.4 ?
Can I use kernel auditore or should I remove it and use synapse?
Click to expand...
Click to collapse
yes it's compatible
you can use both
Great kernel, only a single bug in synapse using the posted UKM:
Under Misc, the default power suspend mode is set to User Mode. Below it is a bar named "Power Suspend State". Changing its value to anything but 0 causes com.af.synapse.utils.RunCommandFailedException: echo: write error: Invalid argument
Using RR5.1.1 CAF on a d802.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a port of Optimus Kernel by Flashhhh for Titan
Make sure to thank him - Here
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work ONLY on Marshmallow roms(Not for stock roms) only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Custom Kernel Features:
- Updated to latest cm-13.0 Sources
- Compiled With Custom UBER 5.2.1 Toolchain
- Compiled With -O3 & Graphite Flags
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- Intelliplug
- Mpdecision hotplug driver(Using custom powerhal by CM)
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- Adreno Idler Algorithm
- PowerSuspend Driver v1.5
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- LMK tweaks
- block: disable add_random
- Enable unaligned capability for ARM
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Power Efficient WorkQueues
- Kexec patched
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Pls Read This before flashing:
You need ROM's default kernel before flashing this, as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX. Some useful battery saving tipshttp://forum.xda-developers.com/showpost.php?p=64850959&postcount=198
DOWNLOADS:
Grab it here
#ROM infos on the 4th post, be sure to check it
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik Cache and Cache partitions
5. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Synapse or Kernel Adiutor
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store.
I would like to say thanks to @flashhhh for allowing me to port the kernel. Also a big thanks to @faux123 @YoshiShaPow @fermasia @Alberto97 @TeamMex @Quasar @Mazda @FabioSan @Blechdose @neobuddy89 @RenderBroken @savoca @deadman96385 @pinkflozd @alin.p @Cl3Kener @Shivam Kuchhal @cust0mworx for the awesome graphics and CYANOGENMOD TEAM
and MANY MORE...
XDA:DevDB Information
Optimised CM and Viper Kernel for Titan, Kernel for the Moto G 2014
Contributors
Vatsal
Source Code: https://github.com/koradiavatsal/Viper-kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v6
Stable Release Date: 2016-01-15
Created 2015-12-02
Last Updated 2016-01-17
FAQ
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on hastebin.com and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM13 based roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.[/QUOTE]
Info
Many thanks to showp1984 for this info
What is msm_mpdecision?
100% kernel based multi core decision! (should cpu1/2/3 be online or not?)
This is a special version modded by neobuddy Plus the idle frequency and some load thresholds have been adjusted by me.
Some Configuration:
startdelay = time until mpdecision starts doing it's magic (20000)
delay = time between checks (130)
pause = if something else plugs in the cpu, fall asleep for 10000ms (10 secs)
scroff_single_core = if the screen is off, don't plug in cpu1/2/3. Additionally: Unplug all cpus except cpu0 when screen is turned off (1)
enabled = enable(1) or disable(0) mpdecision. This does not affect scroff_single_core!
min_cpus = min cpus to be online, cannot be < 1. Default: 1
max_cpus = max cpus to be online, cannot be > 4. (if you set it to 2 and min_cpus to 1 you will basically have a dualcore) Default: 4
idle_freq = a value against that will be checked if a core +/- is requested. (600 MHz)
mpdecision's input event boost, aka project butter
This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value on every online cpu. This boosts overall reaction times and smoothness a lot. (works similar to the qcom mpdecision binary)
So here's the surprise
Hello folks,
I am using my own optimised builds since initial phase of CM13. Rom and kernel are both build with Uber 5.2.1 and few more optimisations on the kernel (It's same like in the first post). The Uber Toolchain developer said due to new neon optimisations in Uber toolchains, the battery life has increased by 25%. Well using since a long time, I almost get 6hrs+ SOT(Ofcourse will vary with you) and a mindblowing performance. So I am going to provide weekly Uber CM13 builds with optimisations(It is somewhat close to pf-cm by Diamond Bond). The people interested, could use it , It will stay really close to CM and few picks here and there. I would really appreciate feedbacks I am using the build posted and it's really rock stable.
Download :-
All optimised buildshttps://www.androidfilehost.com/?w=files&flid=44644
Installation :-
A clean wipe is mandatory.
Wipe cache,dalvik cache, system, data
Flash the zip
Flash gapps ( I use slim zero gapps)
Reboot, Enjoy!
FAQ:-
Differences between UBERTC and other Toolchains
Changelog for the 1st December Toolchain updates
Regards
Awesome work brother
Vat Bro
This is cool.
Good going
Keep it UP
Check #4th post for the Optimised cm13 builds, Really didn't feel like making a new thread..
Is it fully functional, Like Working mobile data , camera Themes Etc... Is there any way you can provide delta updates to ur rom instead of downloading the whole file.. I'm currently using cm 13 which has no Major issues as of now , so is this rom(dec 2 build) Recommend or should I wait for future builds ?
Thanks IA ��
james11705 said:
Is it fully functional, Like Working mobile data , camera Themes Etc... Is there any way you can provide delta updates to ur rom instead of downloading the whole file.. I'm currently using cm 13 which has no Major issues as of now , so is this rom(dec 2 build) Recommend or should I wait for future builds ?
Thanks IA ��
Click to expand...
Click to collapse
Everything working same as CM, No OTA/delta updates sorry..
Vatsal said:
Everything working same as CM, No OTA/delta updates sorry..
Click to expand...
Click to collapse
Thanks for the quick response , I'll try it out and let you know .., . And thanks for the rom ��
I can't install your kernel over CM's stock kernel. there's an error with the updater-script. I am using the 02/12 CM13 build, how can I help?
(zip placed on the root of internal storage)
Vatsal said:
Everything working same as CM, No OTA/delta updates sorry..
Click to expand...
Click to collapse
Does that mean XT1068 users with one sim cannot use this?
Sent from my Moto G 2014 using Tapatalk
Vidhanth said:
Does that mean XT1068 users with one sim cannot use this?
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
I guess thats fixed in cm as well
Vatsal said:
I guess thats fixed in cm as well
Click to expand...
Click to collapse
Sweet. Have you tried it though? Cuz I can't risk 310 MB lol
Sent from my Moto G 2014 using Tapatalk
Vidhanth said:
Sweet. Have you tried it though? Cuz I can't risk 310 MB lol
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
I have msim
mpeL said:
I can't install your kernel over CM's stock kernel. there's an error with the updater-script. I am using the 02/12 CM13 build, how can I help?
(zip placed on the root of internal storage)
Click to expand...
Click to collapse
Installs really fine here, can someone else confirm the issue?
Vatsal said:
I have msim
Click to expand...
Click to collapse
Thanks man. I'll try it asap. I always wanted to be on 6.0 but the battery life held me back. But now that u have said its increased by 25%, I'll have to try it
Sent from my Moto G 2014 using Tapatalk
Vatsal said:
Installs really fine here, can someone else confirm the issue?
Click to expand...
Click to collapse
Same here , I tried flashing this Kernel over ur rom(didnt know it already had this kernel) , I tried mounting n unmounting system, still got error updating binary...
james11705 said:
Same here , I tried flashing this Kernel over ur rom(didnt know it already had this kernel) , I tried mounting n unmounting system, still got error updating binary...
Click to expand...
Click to collapse
Yes rom has the same kernel inbuilt. I'll reupload kernel.
EDIT : Uploaded Download
Please test this and tell me
Vatsal said:
Yes rom has the same kernel inbuilt. I'll reupload kernel.
EDIT : Uploaded Download
Please test this and tell me
Click to expand...
Click to collapse
Still the same error, tried it on crdroid 6.0 also .. Other than the kernel, the rom is awesome, better than cm 13 official in performance n also is bAttery Friendly ?
Some amazing stats with quiet heavy use
Sent from my Moto G 2014 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Code:
If you have anything against me, my projects, this project hurts you,
you don't like this project or you are here just to insult me change thread
because you aren't welcome here.
I won't answer at the useless, spam and flame comments and I will report
them. If you want to troll or ruin a thread this isn't the right one.
Hello Guys, today I'm here with my new and I think the first real Custom Kernel for the Zuk z2/z2 plus.
DarkMoon
Features
Here are the major features of the kernel (feel free to explore Github)
Upstream Linux versions 3.18.31-3.18.58
Upstream patches from CAF (LA.UM.5.5.r1-04900-8x96.0)
Support for overclocking to 2419MHz on big and 1766MHz on little (stock values by default)
Support for the GPU overclocking to 652MHz (stock frequencies as default)
Simple_ondemand set as default GPU governor
CPU governors: interactive, conservative, ondemand, userspace, powersave, performance
Touchboost disabled by default
KCAL color control
Zram
I/O schedulers: bfq, cfq, fiops, maple and noop
Wakelock controls: sensor_ind, Ipa, Netlink, Timerfd, Wlan, Qcom rx, Wlan extscan (all disabled as default)
Vibration Strength percentage control
Fsync
Arch Power
CRC control
Gentle Fair Sleepers control
Power suspend mode: Autosleep, Userspace, LCD Panel, Hybrid (default)
Fingerprint sensor speeded up
TCP algorithms: cubic, highspeed, dctcp, hybia, illinois, lp, reno, scalable, vegas, veno, westwood (default)
F2FS support (latest from here)
Compiled with a Linaro 7.1.1 toolchain built with @The Flash 's script (located here).
Makefile optimizations (check it here)
Graphite
Hides bootloader unlock from SafetyNet (can still fail through other means)
Spectrum Support
Custom Ramdisk
Stock Kernel backup (if you want to restore the stock kernel you just need to flash the zip located here)
Flashed with AnyKernel2 (thanks to @osm0sis)
Downloads:
Current Release (004.1): Download here
Current Release Longtap: Download here
Other Releases:
https://www.androidfilehost.com/?w=files&flid=167771
Don't mirror my builds
Changelogs:
Release 002: Here
Release 003: Here
Release 004:
Kernel completely rebased on the latest caf tag available at the moment (LA.UM.5.5.r1-04300-8x96.0) and then updated to the LA.UM.5.5.r1-04900-8x96.0
Kernel upstreamed to the 3.18.58
Some governors removed (really not even added)
Removed Adreno Idler (we don't need it)
Added some optimizations from the AOSPA op3 kernel
Upstreamed F2FS
Upstreamed SDCARDFS (but the device tree need the support for it)
Overclocked CPU and GPU
Added the spectrum support
Added an abort script for some roms
Check the sources for the rest, I can't remember all
Release 004.1:
Fixed a typo in the ramdisk that bugged the GPU frequency change with the spectrum profiles (thanks to AnjoVingador that reported this problem)
Installation Instructions:
Your bootloader must be unlocked
Download the kernel and flash it in the
twrp and wipe cache and dalvik/art cache if you're doing a dirty flash
If you're doing a clean flash flash ROM, gapps, SuperSU and then the kernel
Current Version Informations:
DarkMoon Kernel Version: Release 004
Linux Kernel Version: 3.18.58
GCC Version: Linaro 7.1.1
Current CAF Tag: LA.UM.5.5.r1-04900-8x96.0
Source Code:
https://github.com/DD3Boh/android_kernel_zuk_msm8996
A thank to:
@FireLord1 [https://GitHub.com/FireLord1]
@KriiX-001 for the Kernel Logo
Fedor917 [ https://GitHub.com/cryscript ]
@davidevinavil [ https://GitHub.Com/Davidevinavil ]
@varotone [ https://GitHub.com/ontherunvaro ]
CallMeSuper [ https://github.com/18712886438 ]
If you like my work donate me, it would be very appreciated:
Donation link:
https://PayPal.me/dd3boh
Zuk z2/z2 plus telegram international group:
https://telegram.me/ZukCustomGoodies
Enjoy
Beautiful bro
Enviado desde mi Z2 Plus mediante Tapatalk
First charge
Enviado desde mi Z2 Plus mediante Tapatalk
Finally a new kernel to play around with. Good work @DD3Boh
Test on D.U march 03/17
So far so good, no bugs from capturing image to capturing video.
For AOSP or stock ROM?
Ritik17 said:
For AOSP or stock ROM?
Click to expand...
Click to collapse
Maybe for all ROM.
I use Citrus CAF ROM, no problem.
When the next version will be released?
Is possible to use the file "zImage" inside DarkMoon-Kernel-z2_plus-Release-002.zip and use
Code:
fastboot flash boot zImage
to flash kernel instead of use TWRP Install method?
Thanks
oh, OC clocks were removed I liked hitting 160k on antutu just for fun haha
SiRiusCb said:
Is possible to use the file "zImage" inside DarkMoon-Kernel-z2_plus-Release-002.zip and use
to flash kernel instead of use TWRP Install method?
Thanks
Click to expand...
Click to collapse
Yes it's possible but I don't suggest that because probably you will have broken wlan. If you want you can try
ar_15 said:
oh, OC clocks were removed I liked hitting 160k on antutu just for fun haha
Click to expand...
Click to collapse
Ahahahah
Anyway I removed them because already weren't working. Maybe I'll add them another time in the future but the problem is to make them working without set them as default. Setting an overclock value as default is something that I don't want to do
Ritik17 said:
For AOSP or stock ROM?
Click to expand...
Click to collapse
Technically for all the custom ROMs nougat, then I heard some people that said it works on the marshmallow ROMs and on the stock ROMs too. I only can grant for the custom ROMs (it seems not the Jaguar... Lol) so I don't know about the zui. If you want to try and then tell us it will be very appreciated.
tlxxxsracer said:
BATTERY:
USB Fast charge (when connected to a USB port)??
When charging isnt it always connected to a usb port...? Any extra heating?
Click to expand...
Click to collapse
I didn't know how to say that. When connected to a USB port of a computer or something like that is the meaning. I haven't hearing issues, others have. I'll try to fix these completely with the next release. I hope you will like the kernel
Does it has any impact in the battery life of the phone ? If so its better or worse ?
DD3Boh said:
Technically for all the custom ROMs nougat, then I heard some people that said it works on the marshmallow ROMs and on the stock ROMs too. I only can grant for the custom ROMs (it seems not the Jaguar... Lol) so I don't know about the zui. If you want to try and then tell us it will be very appreciated.
Click to expand...
Click to collapse
I'm not really a stock rom guy, I always prefer custom rom. I was only confirming whether is it for stock or custom cause I didn't wanted to go through making nandroid backup and etc. I did try the kernel and I liked it, nice work.
Arul Stark said:
Does it has any impact in the battery life of the phone ? If so its better or worse ?
Click to expand...
Click to collapse
No, no impacts at the battery life, just the charging speed changes. It can't damage the battery because with a normally charge it still charge faster
Hey DD3Boh, a bit offtopic since I didn't find the specific thread, but are you still updating Darkness Redefined or now you're only developing this Kernel and Citrus? I saw some people asking about it on zukfans's thread but you seem to be more active here lately.
ar_15 said:
Hey DD3Boh, a bit offtopic since I didn't find the specific thread, but are you still updating Darkness Redefined or now you're only developing this Kernel and Citrus? I saw some people asking about it on zukfans's thread but you seem to be more active here lately.
Click to expand...
Click to collapse
I'm more active there because I won't publish on zukfans anymore. For now there is only the zukfans thread for the DND, with the next update I'll post it here too. I still develop it.
DD3Boh said:
Hello Guys, today I'm here with my new and I think the first real Custom Kernel for the Zuk z2/z2 plus.
DarkMoon
Features:
CPU:
Governors:
zzmoove
blu active
chill
elemental X
impulse
nebula
interactive
conservative
ondemand
userspace
powersave
bioshock
performance
Tuch Boost switch
GPU:
Governors:
spdm bw hyp
cache hwmom
mem latency
bw hwmon
msm vidc vmem+
msm vidc vmem
msm vidc ddr
bw vbif
gpubw mon
msm adreno tz
cpufreq
userspace
powersave
performance
simple ondemand
Adreno Idler:
An efficient workaround for msm adreno tz's overheads by Arter97
THERMAL:
Intellithermal:
An in-kernel replacement for Qualcomm's Thermald by faux123
SCREEN:
Screen's Colors editing
Saturation Intensity
Minimum RGB Value
Grayscale Mode switch
Sreen Hue
Screen Value
Screen Contrast
BATTERY:
USB Fast charge (when connected to a USB port)
MISC:
Vibration Strength
Wakelocks switches:
sendor_ind Wakelock
msm_hsic_host Wakelock
wlan_rx Wakelock
wlan_ctrl Wakelock
wlan Wakelock
BlueSleep Wakelock
INFO:
Linux Kernel version: 3.18.48
DarkMoon Kernel Release: Release 002
GCC: Uber TC 6.x
DOWNLOADS:
Release 001: https://www.androidfilehost.com/?fid=529152257862716201
Release 002:
https://www.androidfilehost.com/?fid=457095661767152450
Changelog Release 002:
https://www.androidfilehost.com/?fid=673368273298945966
SOURCE CODE:
https://github.com/DD3Boh/android_kernel_zuk_msm8996
CONTRIBUTORS:
@miju12 [https://github.com/miju12]
A thank to:
@FireLord1 [https://GitHub.com/FireLord1]
Fedor917 [ https://GitHub.com/cryscript ]
@davidevinavil [ https://GitHub.Com/Davidevinavil ]
@varotone [ https://GitHub.com/ontherunvaro ]
If you like my work donate me, it will be very appreciated:
Donation link: https://PayPal.me/dd3boh
Zuk z2/z2 plus telegram international group: https://telegram.me/ZukCustomGoodies
Enjoy
Click to expand...
Click to collapse
A new update is out. The Release 002. Really it was already out on zukfans but I didn't updated the thread here. Now I'll publish only on XDA so the next update will be always there
I would like to present you first kernel for nitrogen for Pie ROMS (MIUI+GSI)
Installation steps:
1)Download latest kernel zip
2)Reboot to recovery
3)Mount vendor partition in recovery
4)Flash kernel zip
5)Wipe cache+dalvik-cache
6)Reboot
Features:
-Overclock+Underclock+Undervolt
-sdFAT(exFAT) support
-KCAL
-Governors: cultivation, nightmare, darknessV5, darkness, alucard
-Maple I/O scheduler
-GPU undervolt
-CRC on/off support
-FSYNC on/off support
-Fast charge via USB port
-Wireguard
-Power Efficient Workqueue by default
-Headphones sound gain control
-Microphone gain control
-320K AAC encoding (for audiophiles mostly)
-Powersuspend!
-many power efficient workingueues patches
-ZRAM/SWAP disabled by default
Feel free to join to my Telegram group where you will get available ROMs list, fixes and latest test versions of ResurrectedKernel! :
JOIN!
DOWNLOAD LINKS:
Click here for old versions
Click here for newest versions
IM NOT RESPONSIBLE FOR ANY PROBLEMS OR BUGS THAT MIGHT HAPPEN WITH YOUR DEVICE
XDA:DevDB Information
ResurrectedKernel, Kernel for the Xiaomi Mi Max 3
Contributors
mario_R
Cirno/remicaa- big help with sources
afr- bringup kernel source upstreamed to 4.4.180
Makshow- tester
opasha- tester
Source Code: Click
Kernel Special Features:
Version Information
Status: Beta
Current Stable Version: ----
Stable Release Date: ----
Current Beta Version: v5
Beta Release Date: 2019-04-28
Created 2018-09-15
Last Updated 2019-04-28
Reserved
Every version is tested before pushing it on XDA
Changelog:
V7.0:
-Android 10 support
-MIUI and GSI compatible
V6.2:
-kernel updated to 4.4.189 version
-added missing touch drivers (thanks to @afr30010)
-added version for MIUI STABLE
V6.1:
-wireguard updated
-reverted CPU voltages to the previous state (unstability fix for some users)
V6:
-kernel upstreamed from 4.4.153 to 4.4.183
-Westwood TCP added and set by default
-GPU: unlock 19MHz for idle state
-improvement: system will now boot with maximum CPU frequency
-undervolted 1.1GHz/1.8GHz/2.1GHz/2.2GHz frequencies
-default pwrlvl for GPU changed from 2 to 3 (now GPU can sit down to 160MHz instead of constantly running at 266MHz even when it's not necessary)
-CRC check enabled by default
-improvements for RAM utilization
-improvements for CPU when it's in idle state
-Wireguard updated
-mine kernel presets when system boot up
More info here CLICK
V5.1:
-fix for sound+videos on latest beta MIUI versions
V5.01:
-re-enabled zRAM and SWAP as some users complain about low memory with a lot of apps in background on 4GB RAM variant
V5:
-added KCAL
-Governors: cultivation, nightmare, darknessV5, darkness, alucard
-Maple I/O scheduler (from now it's set as default since it offers best file system performance)
-GPU undervolt
-CRC on/off support (off by default for better performance)
-FSYNC on/off support (off by default for better performance)
-Fast charge via USB port
-Wireguard
-Power Efficient Workqueue by default
-Headphones sound gain control
-Microphone gain control
-320K AAC encoding (for audiophiles mostly)
-Powersuspend!
-many power efficient workingueues patches
-ZRAM/SWAP disabled by default
V4:
-ResurrectedKernel for Pie ROMs, same features as the Oreo version
-new features coming soon!
-update: sound doesn't work on latest miui 9.3.28 and latest stable
V3:
-added sdFAT (exfat) support
-undervolt (as you wanted me to do it few days ago) up to -500000 uV (depends on frequency)
V2:
-Overclock both big and little cores
-Underclock for more battery juice
-WiFi fixed
V1:
-- Initial release
Reserved
Features please
Zanr Zij said:
Features please
Click to expand...
Click to collapse
It's initial release, so it's just compiled from Xiaomi sources. As i said, i don't have this device yet, so i need you guys to test if Xiaomi's sources are complete and everything works fine. If it boots up, then i will add features to it
I'm guessing the kernel should be flashed on top of this rom?
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
SUPERUSER said:
I'm guessing the kernel should be flashed on top of this rom?
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
Click to expand...
Click to collapse
Yes, it's for any Oreo ROM. MIUI and Custom. I'm not sure about if it works on Pie GSI
Do not boot. Xiaomi eu
Boots into fastboot
Mikromama said:
Do not boot. Xiaomi eu
Boots into fastboot
Click to expand...
Click to collapse
Yep, same here with pitch black recovery and twrp recovery. Flashed over 8.8.9 xiaomi.eu rom.
Flash on miuipro 8.9.13
- Cannot boot, it auto boot into fast boot
- After flash magisk 17.1 , it can boot to UI but cannot power on Wifi and Network data
Can you add overclocking?
souljaboy said:
Can you add overclocking?
Click to expand...
Click to collapse
For now, im just fighting with WiFi drivers
Did ya we're able to fix the wifi issue?
Did ya we're able to fix the wifi issue?
jacky3362 said:
Did ya we're able to fix the wifi issue?
Click to expand...
Click to collapse
Yep, he's releasing it soon. Just undergoing some tests. Wifi fixed and overclocked too.
V2 Version is ouot
jacky3362 said:
Did ya we're able to fix the wifi issue?
Click to expand...
Click to collapse
V2 Version is out guys! Check out the changelog and enjoy Snapdragon 660 CPU performance in your Mi Max 3 equiped with Snapdragon 636
Changelog:
V2:
-Overclock both big and little cores
-Underclock for more battery juice
-WiFi fixed
Just installed on xiaomi eu 8.9.20(latest) it works fine.
edit. Wifi don't working even with fix.
In antutu i have got 119K on stock kernel and 131.7k on ResurrectedKernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shlyify said:
Just installed on xiaomi eu 8.9.20(latest) it works fine.
edit. Wifi don't working even with fix.
In antutu i have got 119K on stock kernel and 131.7k on ResurrectedKernel
Click to expand...
Click to collapse
Did you mount /vendor partition before flash both .zip files?
Btw. nice score. 12k points more
mario_R said:
Did you mount /vendor partition before flash both .zip files?
Click to expand...
Click to collapse
yes I did both,100% mount/vendor
first i installed kernel than 2x reboot phone cause 1st reboot was laggy, than i install wifi fix
Shlyify said:
yes I did both,100% mount/vendor
first i installed kernel than 2x reboot phone cause 1st reboot was laggy, than i install wifi fix
Click to expand...
Click to collapse
Maybe try manually replace qca_cld3_wlan.ko from the zip file in /vendor/lib/modules/qca_cld3 with a file manager for example, root explorer
Set permission to 644 and reboot
SUPERUSER said:
Maybe try manually replace qca_cld3_wlan.ko from the zip file in /vendor/lib/modules/qca_cld3 with a file manager for example, root explorer
Set permission to 644 and reboot
Click to expand...
Click to collapse
still not working. Here what i did:
1. copy file "qca_cld3_wlan.ko" from WiFi_fix.zip
2. I didn't know where the file should excatly be,so I paste the file in 2 places:
- vendor/lib/
- vendor/lib/modules/
3. set permission 644 for the file in both places - vendor/lib/ and - vendor/lib/modules/
4. reboot
any ideas?