{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
** Disclaimer
I am not responsible if flashing this ROM bricks your
phone or causes thermonuclear war and ends the
world as we know it. You have been warned.
ROM Information
ROM Target Device: Samsung Galaxy Tab E SM-T560NU | SM-T377P
ROM Status: Testing
ROM OS: LineageOS/LineageOS Go 16.0
Project GitHub Repositories: https://github.com/Galaxy-MSM8916
Project Gerrit Review site: https://review.msm8916.com/
Telegram Channel (for ROM build/completion notifications): https://telegram.me/Samsung_MSM89XX
Telegram Group (for Q&A): https://telegram.me/joinchat/AJrZvz_pGY7Pvfis9kzMwA
Click to expand...
Click to collapse
Device Names
Verify your device codename before downloading any firmwares or recovery images for your device. Any device not on this list is not supported on this thread: If you install firmware from this list onto an unsupported device, any issues are your responsibility entirely, and I am not obligated to help in any way.
Code:
[B]SM-T560NU[/B] - [COLOR="DarkSlateBlue"][B]gtelwifiue[/B][/COLOR]
[B]SM-T377P[/B] - [COLOR="DarkSlateBlue"][B]gtesqltespr[/B][/COLOR]
Click to expand...
Click to collapse
Download
If you are completely new to flashing custom ROMs and have no idea how to begin, start by downloading a TWRP image for your device from the link below and flash it using the ODIN tool (see Instructions below). You cannot flash a custom ROM over stock recovery, so downloading a custom recovery is the first thing you will need to do:
TWRP Builds: https://download.msm8916.com/TWRP/
Click to expand...
Click to collapse
ROM Downloads can be found at:
LineageOS builds: https://download.msm8916.com/LineageOS/16.0/
LineageOS GO builds: https://download.msm8916.com/LineageOS_Go/16.0/
Click to expand...
Click to collapse
You will probably need to install GApps (Google Apps Suite) as well if you want access to Play Store, and other Google apps. There are two versions:
GApps: https://download.msm8916.com/OpenGApps/
or (recommended for lineage) :
GApps: https://download.msm8916.com/MindTheGapps/
Click to expand...
Click to collapse
Instructions
Installation via recovery (TWRP/LineageOS Recovery)
* Download a recent .zip file from the links above for your device.
* Reboot into recovery mode [Press Power+Volume Up+Home].
* Wipe your data and cache partition (equivalent to doing a Factory Reset)
if you are coming from a stock ROM.
* Either: Plug in your phone into your computer, copy the zip file to a location on your Internal or External Storage on a device, click Install on TWRP on your phone and locate the zip file in the phone, or:
* Plug in your phone into your computer, and open Advanced->ADB Sideload on TWRP on your phone and swipe the slider to enter sideload mode.
Then open a command prompt/terminal on your computer in the folder you put the file by Shift-Clicking (Shift+Right Click) and selecting "Open Command Prompt/Terminal Here" (you will need to have adb installed) and type:
adb sideload name_of_zip.zip
to sideload the file. Replace name_of_zip.zip with the name of the file. If you are running Linux you may need to type adb kill-server and use sudo adb sideload if you get an `Insufficient Permissions` error.
* Download and flash GApps in the same way.
Click to expand...
Click to collapse
How to provide logcats
Under Windows:
Code:
[B]* Install samsung device drivers and then
the adb utils from here:[/B]
[url]https://forum.xda-developers.com/showthread.php?t=2588979[/url]
[b]* Then enable developer mode, connect your phone to usb,
and from [B]cmd[/B] paste this command:[/b]
[I]adb logcat > %userprofile%/Desktop/logcat.txt[/I]
[b]then try to reproduce the bug.[/b]
[b]* The logcat file will be on your desktop.[/b]
Under Linux:
Code:
[b]* Install the adb utils from your distribution's
package manager and execute the command:[/b]
[I]adb logcat > ~/logcat.txt[/I]
[b]then try to reproduce the bug.[/b]
[b]* The logcat file will be on your home directory.[/b]
* Submit the logcat here on the forums, or on the Telegram group.
* If you cant connect the device through adb on windows because the drivers, connect the device over wifi, enable adb over network on the quick setting tiles, and type:
Code:
adb connect [ip address here]
And then the adb logcat command for windows.
Click to expand...
Click to collapse
FAQ
Q: Are you taking device requests?
A: No.
Q: Are you accepting feature requests?
A: No.
Q: Can you make XXX ROM as well as LOS?
A: No.
Q: Can I throw money at you?
A: Most certainly. Donations are always welcome.
Click to expand...
Click to collapse
XDA:DevDB Information
[UNOFFICIAL][ROM] LineageOS/Go 16.0 for Galaxy Tab E [SM-T377P/SM-T560NU], ROM for the Samsung Galaxy Tab E
Contributors
vince2678, minz1, deadman96385, vlw, Danil_e71
Source Code: https://github.com/Galaxy-MSM8916
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: >= 5.0 (Lollipop)
Based On: LineageOS
Version Information
Status: Beta
Created 2018-09-26
Last Updated 2019-09-08
Reserved
If this is your first time flashing P, you will need to install the latest unofficial TWRP image for your device from the links above before flashing a zip image, otherwise installation of a zip will invariably fail.
Reserved
What works
Code:
[B]
[STRIKE]* RIL (in-call audio, messaging, [I]data possibly[/I])[/STRIKE]
* Bluetooth (including audio)
* WiFi
* Audio (music, etc)
* Camera (including video recording)
* Flash
* Sensors
* GPS
[/B]
Known Issues
Code:
[COLOR="RoyalBlue"][B]All devices[/B][/COLOR]
* [B][[COLOR="Red"]BUG[/COLOR]][/B] [B] Audio is buggy (music playback through speaker/headphones in particular) [/B]
* [B][[COLOR="Red"]BUG[/COLOR]][/B] [B] RIL (telephony) is broken [/B]
* [B][[COLOR="Red"]BUG[/COLOR]][/B] [B] Encryption does not work. This is indefinitely broken[/B]
Changelog
Code:
[COLOR="Black"][B]27/09/2018[/B][/COLOR]
* [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] WiFi should be working on the latest build [/B]
Code:
[COLOR="Black"][B]26/09/2018[/B][/COLOR]
* [B][[COLOR="Green"]NOTE[/COLOR]][/B] [B] First working image built. [/B]
i chose gapps 32 or 64 bit for sm-t560nu???
mrmaximebarry said:
i chose gapps 32 or 64 bit for sm-t560nu???
Click to expand...
Click to collapse
32 bit
vince2678 said:
32 bit
Click to expand...
Click to collapse
Thx mister
steps to flash from stock rom 4.4.4
Hi i just acquired 2 of the SM-T560 models, firstly would this current stock 4.4.4 rom work with above ROM, secondly i see it needs a MM firmware beforehand, any help GREATLY appreciated.
device type: gtelwifi
csc code: BTU (uk)
Bootloader, CSC & PDA version: T560XXUOAPL1
ProductCode: SM-T560NZKABTU
Any steps on flashing this ROM or recommendtions for other ROMS which will work with above device
PS : No cellular only wi-fi
CirrusUK said:
Hi i just acquired 2 of the SM-T560 models, firstly would this current stock 4.4.4 rom work with above ROM, secondly i see it needs a MM firmware beforehand, any help GREATLY appreciated.
device type: gtelwifi
csc code: BTU (uk)
Bootloader, CSC & PDA version: T560XXUOAPL1
ProductCode: SM-T560NZKABTU
Any steps on flashing this ROM or recommendtions for other ROMS which will work with above device
PS : No cellular only wi-fi
Click to expand...
Click to collapse
The device supported is the SM-T560NU, aka gtelwifiue.
The device you have is not supported.
The links for this rom isn't working
reinerbraun2 said:
The links for this rom isn't working
Click to expand...
Click to collapse
For me it took a couple of minutes just for the file to load in my browser. Downloading the file has been slow (~30-100 KB/s) & it's taken a little over 3 hours to download.
Amazing work @vince2678. I am going to give it a try. My first flash after 3 years.
Were the Go builds intentionally wiped?
The latest gtelwifiue builds are here:
Normal build: https://github.com/Galaxy-MSM8916/releases/releases/tag/lineage-16.0-j14-20181015-NIGHTLY-gtelwifiue
GO build: https://github.com/Galaxy-MSM8916/r...ineage-go-16.0-j1-20181015-NIGHTLY-gtelwifiue
Does anyone know how to quickly sort or search the builds on github? It takes a while to hunt through them.
On the bright side, the latest (non-Go) build is working really well. Other than the Pie recents menu which is just awful... Music playback seems to be fine, they must have fixed that bug. Even my sdcard, which did not work on the Lineagte 15.1 builds, works properly here on 16.0. Great work by the dev team.
Can I install SuperSU via TWRP on this ROM
BigJ30039 said:
Can I install SuperSU via TWRP on this ROM
Click to expand...
Click to collapse
You should be able to, if SuperSU supports Android 9. I'm using Magisk for su and root management, seems to work well.
This ROM is great. The only problem I've encountered on this and your 15.1 ROM is with the YouTube app. I can load the YouTube app just fine, but it will just try and load any type of feed in the app forever and no videos will ever show up.
Trylr said:
This ROM is great. The only problem I've encountered on this and your 15.1 ROM is with the YouTube app. I can load the YouTube app just fine, but it will just try and load any type of feed in the app forever and no videos will ever show up.
Click to expand...
Click to collapse
I actually fixed my problem. I flashed the latest stock rom for my device, then I reflashed this rom and it is working now.
1. So, " Android 9 (Pie)" or "ROM OS Version: 8.x Oreo" ??
2. Still "RIL (telephony) is broken "? (GO build) Calls/texts - most important for me on my SM-T377P. BTW, installed call app and text app?
does this support SM-T561 model ?
any 3rd party mirrors for the Roms?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Support
LineageOS 17.1 for Samsung S4 I9505
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device. All the source code for LineageOS is available in the LineageOS Github repo. If you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Code:
* [B][U]Your warranty is now void.[/U][/B]
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
What all works
Boot
RIL (Calls, SMS, Data)
Camera
Video
Audio
Flash
Led
GPS
Sensors
Rotation
Wifi
Bluetooth
USB
Hotspot
What doesn't work
Possibly other things that aren't listed.
Creates a full backup of the system
Installation Clean :
Before you begin, save
Remove the PIN protection and then restart for TWRP recovery.
Erase data under Advanced (do not format data - this will erase the internal memory)
Delete system and cache under Advanced
Flash ROM + Gapps or for microG user flash microg_installer_revived
Optional - Flash magisk for root
Restart
!!! OTA-update is like in all my Roms set up !!!
Updates can be downloaded and installed via lineageos_updates on your mobile phone.
if it should not be possible to install the update automatically or you want to install it manually, proceed as follows,
(Selects in twrp) install/selects memory/internal memory/parent folder/data/lineageos_updates.
chooses the build and installs it and everything else you want to install and restarts after that.
to activate root navigate to Settings->About Phone and tap on build number 7 times,
go back to System on developer options and scrolls to root access and activates it.
to be able to boot from the power key to recovery on long press, it simply activates it in the developer options under Extended Restart.
Download Rom
https://www.los-legacy.de/17.1/jfltexx
Downlad Bootloaders with modems
- I9505XXUHQK1_I9505XXUHQK1.tar
Download Root
https://github.com/topjohnwu/Magisk
Download MicroG
GitHub - nift4/microg_installer_revived: Install microG GmsCore, GsfProxy, FakeStore (or Play Store if you want so) and MapsV1 to /system/
Install microG GmsCore, GsfProxy, FakeStore (or Play Store if you want so) and MapsV1 to /system/ - GitHub - nift4/microg_installer_revived: Install microG GmsCore, GsfProxy, FakeStore (or Play Sto...
github.com
Download
F-Droid - Free and Open Source Android App Repository
F-Droid ist ein installierbarer Katalog mit FOSS-Apps (Free and Open Source Software) für Android. Der Client vereinfacht die Suche und Installation von Apps und behält den Überblick über Aktualisierungen.
f-droid.org
Alternative Playstore
Aurora Store | F-Droid - Free and Open Source Android App Repository
An open-source alternative to Google Play Store with privacy and modern design
f-droid.org
Take a note that a lot of LineageOS features have not been completed yet this is not a device bug and please do not report those
in this rom thread
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) data/tombstones
d) dmesg
Credits
-go to LineageOS and ,Nolen Johnson,Arne Coucheron
and every other open source developer and tester who contributes directly or indirectly to the LineageOS community in the development of and in providing feedback for the Samsung S4 .
Support for german users
Root / Custom-ROM's - Los-Legacy
Deine Android Community
forum.los-legacy.de
Contributors
Exodusnick
Source Code: https://github.com/LineageOS
Kernel
GitHub - LineageOS/android_kernel_samsung_jf at lineage-17.1
Contribute to LineageOS/android_kernel_samsung_jf development by creating an account on GitHub.
github.com
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2023-02-26
Created 2019-05-28
Last Updated 2023-02-26
new update
I recommend a clean installation.
you'll find everything else in the op.
Exodusnick said:
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Click to expand...
Click to collapse
A "4.x" Kernel for the S4? How is that possible?
sorry, typing mistake
<3 <3
new update available via OTA
Upload to OTA server
Create MD5 checksum file
Transfer Rome to database
Download direkt https://www.los-legacy.de/16.0/jfltexx
Filename: lineage-16.0-20190707-UNOFFICIAL-jfltexx.zip
Device: jfltexx
Storage Directory:data/lineageos_updates
OS_patch_level 05.07.2019
OS Version: 16.0
2019-07-07 19:57:24
Romtype: unofficial
MD5SUM: 5ffb8b803779cedec35d379951411446
SIZE: 395601062
Changelog
- Synced with LOS Source
- Security updates 05.07.2019
https://www.los-legacy.de/jfltexx/16.0/changes/
Attention OP Name Has been changed all post are no longer valid. my rom has Signature Spoofing and is microg ready]
phatwhomper said:
If I flash to twrp 3.2+ I can't load twrp on my m919 to start the OS install.
It only loads on 3.1.1.0 or below. But if I try to install lineage 15.1 on 3.1.1.0 or below, I get an error 7 and can't install the OS.
Seems like I can't install it either way because of a conflict with twrp and lineage versions. Is anybody able to get around this?
Click to expand...
Click to collapse
I had the same problem and used this successfully
https://forum.xda-developers.com/ga...p/jdcteam-twrp-3-3-0-0-custom-builds-t3925619
Some report success with this
https://dl.twrp.me/jflte/
How can I delete post?
rophiroth said:
How can I delete post?
Click to expand...
Click to collapse
You can't. You may edit it (and tell us a good joke).
ANT+ support
Hi,
I'm using lineageos 16 on my 9505, but I'm missing ANT+ -Support for using my cycling-sensors. Will this coming or what shall I do to work with it?
Thanks for a reply.
so new update is on the way via OTA, had to test it first, as always everything in order
changelog
- Synced with LOS Source
somehow the changelog on our site doesn't work :/
but here everything is in it too
https://www.lineageoslog.com/16.0
download:
https://www.los-legacy.de/16.0/jfltexx
New update available via ota
Upload to OTA server
Create MD5 checksum file
Transfer Rom to database
URL: https://www.los-legacy.de/16.0/jfltexx
Filename: lineage-16.0-20190727-UNOFFICIAL-jfltexx.zip
Device: jfltexx
Storage Directory:data/lineageos_updates
OS Version: 16.0
2019-07-27 00:38:06
Romtype: unofficial
MD5SUM: 8601ddd8c8ad466eb8ca9f3459dda70f
SIZE: 396518967
Changelog
- Synced with LOS Source
https://www.lineageoslog.com/16.0
Is MHL working?
Hi peoples,
can anyone test if MHL is working?
thanks
@vectorsigma2099
Can't you test it yourself and then report because you have MHL or not ?
@vectorsigma2099
Can't you test it yourself and then report because you have MHL or not ?
Hi guys!
I tried to install the rom but my S4 seems to be in bootloop (it keeps rebooting, showing the classic Samsung Galaxy S4 GT-I9505 singature) and I don't know what to do, since i have all set up (twrp 3.2.3, latest firmware I9505XXUHQK1, did all the wipe for a clean installation).
Any suggests?
New build via OTA - update available
Upload to OTA server
Create MD5 checksum file
Transfer Rom to database
URL: https://www.los-legacy.de/16.0/jfltexx
Filename: lineage-16.0-20190805-UNOFFICIAL-jfltexx.zip
Device: jfltexx
Storage Directory: data/lineageos_updates
OS Version: 16.0
OS_patch_level 05.07.2019
2019-08-05 09:16:34
Romtype: unofficial
MD5SUM: 969517e90821f8fbd4cbb05d3cb0d94d
SIZE: 394877794
Changelog
Synced with los sources
https://www.los-legacy.de/jfltexx/16.0/changes/
MaxTuccia said:
Hi guys!
I tried to install the rom but my S4 seems to be in bootloop (it keeps rebooting, showing the classic Samsung Galaxy S4 GT-I9505 singature) and I don't know what to do, since i have all set up (twrp 3.2.3, latest firmware I9505XXUHQK1, did all the wipe for a clean installation).
Any suggests?
Click to expand...
Click to collapse
Up. None can help me? Basically it reboot, buzzes twice then start again and again.
@MaxTuccia
how is your installation process described in detail?
current twrp
https://dl.twrp.me/jflte/
Well, I flashed TWRP 3.2.3 via Odin, did full wipe then uploaded rom and gapps (tried both via Odin and with microsd), flashed these 2 zips, reboot and then its stucked. I also tried with different modems and bootloader like xxuhqk1, xxuhqc2, xxuhpk1/2 but the result is always the same. The only 2 things that work are TWRP installing (I had to install it many times cause I went back to stock firmware to check stuff like what is the actual version, and it’s with snapdragon 600 etc) and firmware stock installing (but now WiFi on stock firmware doesn’t work, I ****ed up prolly with modems and bootloaders...).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
** Disclaimer
I am not responsible if flashing this ROM bricks your
phone or causes thermonuclear war and ends the
world as we know it. You have been warned.
ROM Information
ROM Target Device: Samsung Galaxy Grand Prime SM-T377p | SM-T560NU
ROM Status: Beta
ROM OS: RessurectionRemix 6.x.x
Project GitHub Repositories: https://github.com/Galaxy-MSM8916
Project Gerrit Review site: https://review.msm8916.com/
Telegram Channel (for ROM build/completion notifications): https://telegram.me/Samsung_MSM89XX
Telegram Group (for Q&A): https://telegram.me/joinchat/AJrZvz_pGY7Pvfis9kzMwA
Bug reports: https://bugs.msm8916.com/
Click to expand...
Click to collapse
Device Names
Verify your device codename before downloading any firmwares or recovery images!
Code:
[B]SM-T377P[/B] - [COLOR="DarkSlateBlue"][B]gtesqltespr[/B][/COLOR]
[B]SM-T560NU[/B] - [COLOR="DarkSlateBlue"][B]gtelwifiue[/B][/COLOR]
Click to expand...
Click to collapse
Download
Lineage/Android builds: https://download.msm8916.com/ResurrectionRemix/
GApps: https://download.msm8916.com/OpenGApps/
or (recommended) :
GApps: https://download.msm8916.com/MindTheGapps/
TWRP Builds: https://download.msm8916.com/TWRP/
Click to expand...
Click to collapse
Instructions
If you are completely new to flashing custom ROMs and have no idea how to begin, start by downloading a TWRP image for your device from the links above and flash it using the ODIN tool (see below).
You cannot flash a custom ROM over stock recovery, so downloading a custom recovery is the first thing you will need to do.
Click to expand...
Click to collapse
If you are completely new to flashing custom ROMs and have no idea how to begin, start by downloading a TWRP image for your device from the links above and flash it using the ODIN tool (see below).
You cannot flash a custom ROM over stock recovery, so downloading a custom recovery is the first thing you will need to do.
Click to expand...
Click to collapse
Installation via recovery (TWRP/LineageOS Recovery)
* Download a recent .zip file from the links above for your device.
* Reboot into recovery mode [Press Power+Volume Up+Home].
* Wipe your data and cache partition (equivalent to doing a Factory Reset)
if you are coming from a stock ROM.
* Either: Plug in your phone into your computer, copy the zip file to a location on your Internal or External Storage on a device, click Install on TWRP on your phone and locate the zip file in the phone, or:
* Plug in your phone into your computer, and open Advanced->ADB Sideload on TWRP on your phone and swipe the slider to enter sideload mode.
Then open a command prompt/terminal on your computer in the folder you put the file by Shift-Clicking (Shift+Right Click) and selecting "Open Command Prompt/Terminal Here" (you will need to have adb installed) and type:
adb sideload name_of_zip.zip
to sideload the file. Replace name_of_zip.zip with the name of the file. If you are running Linux you may need to type adb kill-server and use sudo adb sideload if you get an `Insufficient Permissions` error.
* Download and flash GApps in the same way.
Click to expand...
Click to collapse
How to provide logcats
Under Windows:
Code:
[B]* Install samsung device drivers and then
the adb utils from here:[/B]
[url]https://forum.xda-developers.com/showthread.php?t=2588979[/url]
[b]* Then enable developer mode, connect your phone to usb,
and from [B]cmd[/B] paste this command:[/b]
[I]adb logcat > %userprofile%/Desktop/logcat.txt[/I]
[b]then try to reproduce the bug.[/b]
[b]* The logcat file will be on your desktop.[/b]
Under Linux:
Code:
[b]* Install the adb utils from your distribution's
package manager and execute the command:[/b]
[I]adb logcat > ~/logcat.txt[/I]
[b]then try to reproduce the bug.[/b]
[b]* The logcat file will be on your home directory.[/b]
* Create a bug report at https://bugs.msm8916.com/ and paste the logcat there.
* If you cant connect the device through adb on windows because the drivers, connect the device over wifi, enable adb over network on the quick setting tiles, and type:
Code:
adb connect [ip address here]
And then the adb logcat command for windows.
Click to expand...
Click to collapse
FAQ
Q: Are you taking device requests?
A: No.
Q: Are you accepting feature requests?
A: No.
Q: Can you make XXX ROM as well as LOS?
A: No.
Q: Can I throw money at you?
A: Most certainly. Donations are always welcome.
Click to expand...
Click to collapse
XDA:DevDB Information
[UNOFFICIAL][ROM] RessurectionRemix 6.x.x for Galaxy Tab E [SM-T377P/SM-T560NU], ROM for the Samsung Galaxy Tab E
Contributors
vince2678, minz1, deadman96385, vlw, Danil_e71
Source Code: https://github.com/Galaxy-MSM8916
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: >= 5.0 (Lollipop)
Based On: LineageOS
Version Information
Status: Beta
Created 2018-08-10
Last Updated 2018-10-10
Reserved
If this is your first time flashing O, you will need to install the latest unofficial TWRP image for your device from the links above before flashing a zip image, otherwise installation of a zip will invariably fail.
Reserved
What works
Code:
[B]
* RIL (messaging, [I]data possibly[/I])
* Bluetooth (including audio)
* WiFi
* Audio (music, etc)
* Camera (including video recording)
* Flash
* Sensors
* GPS
[/B]
Known Issues
Code:
[COLOR="RoyalBlue"][B]All devices[/B][/COLOR]
* [B][[COLOR="Red"]BUG[/COLOR]][/B] [B] Encryption does not work. This is indefinitely broken[/B]
Changelog
Code:
[COLOR="Red"][B]09/02/2018[/B][/COLOR]
* [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Camera recording should be working again.
This was broken due to upstream android security change. [/B]
* [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Telephony should be working on the gtes (T377P). [/B]
* [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Core control has been disabled permanently, in-kernel. [/B]
* [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] NFC may (or may not) be working this build on capable devices.
This is Untested. [/B]
* [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Rebased lineage-15.1 branches in repos. This is mostly
for our benefit; just to tidy up the repos and make commit history more descriptive,
accurate and give proper credits to commit authors. [/B]
* [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Reworked zram support in ROM. There are now two zram properties:
[I]ro.config.zram.enabled[/I] and [I]ro.config.zram.size[/I]
Set [I]ro.config.zram.enabled[/I] [I]true[/I] to enable zram;
and [I]ro.config.zram.size[/I] to set the size of the zram disk.
If you set this too large the system will slow down. You can also just use a zram
zip from the download server to do this automatically.[/B]
Code:
[COLOR="Red"][B]08/12/2018[/B][/COLOR]
* [B][[COLOR="Red"]BUG[/COLOR]][/B] [B] Camera recording is broken.
This is due to upstream android security change. [/B]
* [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Reworked zram support in ROM. There are now two zram properties:
[I]ro.config.zram.enabled[/I] and [I]ro.config.zram.size[/I]
Set [I]ro.config.zram.enabled[/I] [I]true[/I] to enable zram;
and [I]ro.config.zram.size[/I] to set the size of the zram disk.
If you set this too large the system will slow down. You can also just use a zram
zip from the download server to do this automatically.[/B]
* [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Enabled zram by default for low-ram (1GiB) devices [/B]
I can't seem to find the ROM for the 377p, there's no gtesqltespr listed in the ResurrectionRemix directory.
silver9990 said:
I can't seem to find the ROM for the 377p, there's no gtesqltespr listed in the ResurrectionRemix directory.
Click to expand...
Click to collapse
There was a build issue with RR yesterday (something broke upstream) which made builds fail at literally the last step (99%). I'll be rerunning them today.
Does this work on the sm-t377v?
I have a SM-T377T and I hate it, can this rom work on it?
Yes, when will a version that works be available? I have the sm-t560nu and tried to flash the 0804 update, and it comes up with Error 7. Is there a reason for this? What's going on?
ElsaReyes said:
Yes, when will a version that works be available? I have the sm-t560nu and tried to flash the 0804 update, and it comes up with Error 7. Is there a reason for this? What's going on?
Click to expand...
Click to collapse
Read the second post.
vince2678 said:
Read the second post.
Click to expand...
Click to collapse
Thank you! I feel stupid for not having noticed that.
Now though while the rom is flashing fine, the gapps is failing. lol. And I got it from here. It says the zip is corrupt.
---------- Post added at 11:07 PM ---------- Previous post was at 11:00 PM ----------
ElsaReyes said:
Thank you! I feel stupid for not having noticed that.
Now though while the rom is flashing fine, the gapps is failing. lol. And I got it from here. It says the zip is corrupt.
Click to expand...
Click to collapse
Nevermind, got it working. Guess the first download messed up somehow.
Hey Vince, sorry to bug you again but is the ROM for the 377p going to be available soon?
silver9990 said:
Hey Vince, sorry to bug you again but is the ROM for the 377p going to be available soon?
Click to expand...
Click to collapse
As of today, this moment, builds are up for all devices.
I was only able to do a bit of testing on this rom, as soon as I get more time I'll do some deeper testing. I was only able to get a partial logcat but I'll include what I have.
The audio on the latest RR build isn't working through wired headphones or Bluetooth.
reinerbraun2 said:
The audio on the latest RR build isn't working through wired headphones or Bluetooth.
Click to expand...
Click to collapse
The Rom is still a beta, its listed as such in the first post. Usually with unofficial builds it takes a few releases to work out the kinks, but for the most part everything is working beautifully. Give them some time and they'll work out the issue. You just gotta be patient.
---------- Post added at 08:33 PM ---------- Previous post was at 08:29 PM ----------
vince2678 said:
Code:
** Disclaimer
I am not responsible if flashing this ROM bricks your
phone or causes thermonuclear war and ends the
world as we know it. You have been warned.
ROM Information
Device Names
Download
Instructions
Installation via recovery (TWRP/LineageOS Recovery)
How to provide logcats
FAQ
XDA:DevDB Information
[UNOFFICIAL][ROM] RessurectionRemix 6.x.x for Galaxy Tab E [SM-T377P/SM-T560NU], ROM for the Samsung Galaxy Tab E
Contributors
vince2678, minz1, deadman96385, vlw, Danil_e71
Source Code: https://github.com/Galaxy-MSM8916
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: >= 5.0 (Marshmallow)
Based On: LineageOS
Version Information
Status: Beta
Created 2018-08-10
Last Updated 2018-08-10
Click to expand...
Click to collapse
Thank you for this man! I've been using a broken version of Lineage from a while back and there was no development for over a year so Its been sitting in my drawer. I also couldn't find a build of TWRP past 2.8.7 that would work and both your TWRP and rom worked beautifully! Thanks again much appreciation!
---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------
vince2678 said:
Code:
** Disclaimer
I am not responsible if flashing this ROM bricks your
phone or causes thermonuclear war and ends the
world as we know it. You have been warned.
ROM Information
Device Names
Download
Instructions
Installation via recovery (TWRP/LineageOS Recovery)
How to provide logcats
FAQ
XDA:DevDB Information
[UNOFFICIAL][ROM] RessurectionRemix 6.x.x for Galaxy Tab E [SM-T377P/SM-T560NU], ROM for the Samsung Galaxy Tab E
Contributors
vince2678, minz1, deadman96385, vlw, Danil_e71
Source Code: https://github.com/Galaxy-MSM8916
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: >= 5.0 (Marshmallow)
Based On: LineageOS
Version Information
Status: Beta
Created 2018-08-10
Last Updated 2018-08-10
Click to expand...
Click to collapse
Thank you for this man! I've been using a broken version of Lineage from a while back and there was no development for over a year so Its been sitting in my drawer. I also couldn't find a build of TWRP past 2.8.7 that would work and both your TWRP and rom worked beautifully! Thanks again much appreciation!
New builds are up (if you've not seen the announcement).
RE: See the link in the announcement (or third post on the thread for changelog).
NB: The bootloop bug on lineage may have been fixed on devices on which this happened, but this is just a guess, and I can't be certain for sure.
props
vince2678 said:
New builds are up (if you've not seen the announcement).
RE: See the link in the announcement (or third post on the thread for changelog).
NB: The bootloop bug on lineage may have been fixed on devices on which this happened, but this is just a guess, and I can't be certain for sure.
Click to expand...
Click to collapse
Great rom by the way. Can you recommend any custom Kernels ?
thnx:good:
does this support SM-T561 model ?
ANY Lineage/RR ROM, this too, with broken telephony, no mobile network on SM-T377P ("insert SIM card".).
vince2678 said:
If this is your first time flashing O, you will need to install the latest unofficial TWRP image for your device from the links above before flashing a zip image, otherwise installation of a zip will invariably fail.
Click to expand...
Click to collapse
I don't get it. I'm able to flash stock Rom but not RR or Lineage for that matter
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications,
*/
About:
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Introduction:
This is the unofficial Lineage OS thread for the Motorola G7, codename river.
We support all the T-Mobile, International, and Project Fi variants, as their bootloaders are unlockable, while we can't support the Verizon and AT&T variants, as their bootloaders are permanently locked.
ROM:
lineage-16.0-20191001-UNOFFICIAL-river.zip
Stock Firmware:
Official Firmware
Recovery:
Unofficial TWRP
Copy Partitions: (To setup slot_b)
copypartitions.zip
(courtesy of @filipepferraz)
Open GApps:
http://opengapps.org
Preparation for A/B Roms:
01. Download TWRP and the Firmware for your variant from the links above.
02. Remove your google account under Settings > Accounts then factory reset your device as FRP is enforced.
03. Unlock your bootloader Instructions here.
04. Flash your factory firmware image on slot_A
Hold power + Volume down untill you reach bootloader (fastboot mode)
In your extracted firmware folder open a terminal and flash your firmware files with these commands.
NOTE-1: This last step installs vendor.img to slot_b as well.
05. Use terminal to boot latest twrp.img "fastboot boot twrp.img"
06. ## Take a backup of EFS, Persist1, Persist2 then store this on your computer in a safe place!! ##
07. While on Slot_A Flash copypartitions.zip (This step only needs to be completed Once only after updating from stock factory firmwares.)
08. While in TWRP choose Reboot > bootloader
09. Now you're ready for ROM Steps below
ROM - Installation:
01. Download the ROM, TWRP and GApps from the links above.
02. Use terminal to boot latest twrp.img "fastboot boot twrp.img"
03. Flash ROM.zip + TWRP_Installer.zip
04. Reboot > Recovery
05. Install Gapps + Magisk (if you choose)
06. Reboot > System
Updating (AKA 'dirty flash'):
01. Download the updated ROM
02. fasboot boot twrp.img
03. Install ROM.zip + TWRP_Installer
04. Reboot > Recovery
05. flash gapps + Magisk (if you choose)
06. Reboot > System
Notes:
Any time your internal storage aka "Userdata" is from a stock install you must use 'fastboot -w' to erase it before using ROMS
XDA:DevDB Information
Lineage OS 16.0, ROM for the Moto G7, ROM for the Moto G7
Contributors
SyberHexen, erfanoabdi, LineageOS Team
Source Code:
[url]https://github.com/LineageOS[/URL]
android_kernel_motorola_msm8953
android_device_motorola_river_prebuiltvendor
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Stock Vendor.img
Version Information
Status: Testing
Created 2019-08-19
Last Updated 2019-10-01
BUGS
====
1. Mobile Data can be intermittent (potentially carrier specific)
2. LiveDisplay: Default mode causes screen inversion
- Please Switch under Settings > Display > LiveDisplay > Color Profile > To Hal_Native/Standard
Release Notes:
(09/17/2019)
Device:-
* Adoptable Storage Support
* Added support HBM support for all known panels
(fixes non boot with certain screen suppliers)
Kernel:-
* Upstream Kernel [4.9.112] --> [4.9.165]
(09/08/2019)
* Included Patch for Magisk Support
* Different IMS/Telephony Implementation
(which should allow calls on VoLTE)
* LiveDisplay Adjustments
Can you share .repo/local_manifests/roomservice.xml that you use to build the rom?
I'd like to build too.
Thanks.
Great work.
Irrelevant reply, mostly due to error in OP thread;
In the first paragraph of the About it says this LineageOS is for Android Oreo (8.0) while at the bottom it is claimed for Android Pie (9.0)
Will be installing soon for better feedback, but just thought you'd like to be aware of that.
Also, would this include the Security Patch of the most recent official release or is that something not to concern myself over with LineageOS releases?
zenful said:
Irrelevant reply, mostly due to error in OP thread;
In the first paragraph of the About it says this LineageOS is for Android Oreo (8.0) while at the bottom it is claimed for Android Pie (9.0)
Will be installing soon for better feedback, but just thought you'd like to be aware of that.
Also, would this include the Security Patch of the most recent official release or is that something not to concern myself over with LineageOS releases?
Click to expand...
Click to collapse
Gotta love xda thanks for letting me know that xda reverted all my corrections to the main post over night.
So it's android 9.0 built with latest sources
Does this work for the Amazon variant of the Moto g7?
Hi, I apologize if this isn't the best place to post this, but I get an error when following installation instructions. While flashing stock firmware to slot A, I run the command `fastboot flash partition gpt.bin` and get the following output:
Code:
fastboot: core/libsparse/sparse.cpp:131: int write_all_blocks(struct sparse_file *, struct output_file *): Assertion `pad >= 0' failed.
zsh: abort (core dumped) fastboot flash partition gpt.bin
I tried googling for the error, but wasn't able to come up with a clear idea of what to do to fix it. If anyone can point me in the right direction, I'd really appreciate the help. Thanks a lot.
jleprincehoff said:
Does this work for the Amazon variant of the Moto g7?
Click to expand...
Click to collapse
Last i knew Amazon Devices couldnt not be Boot Loader Unlocked
Yes they can be unlocked my g7 power Amazon is unlocked
A lightning said:
Hi, I apologize if this isn't the best place to post this, but I get an error when following installation instructions. While flashing stock firmware to slot A, I run the command `fastboot flash partition gpt.bin` and get the following output:
I tried googling for the error, but wasn't able to come up with a clear idea of what to do to fix it. If anyone can point me in the right direction, I'd really appreciate the help. Thanks a lot.
Click to expand...
Click to collapse
Try updating adb drivers or using different version
Cam Work!!! I can Capture Images and Record Video
Google Gapps - OpenGapps ARM64 Work Fine!!!
Magisk Not Work But the addonsu arm64 for lineage os 16 work!!! :good:
SyberHexen said:
Try updating adb drivers or using different version
Click to expand...
Click to collapse
I'm using the latest Android platform tools on Linux. I should have included this in my first message, but this is a Project Fi phone. I tried both builds in the Fi folder of the lolinet link in the OP, and both had the same problem. The model numbers on these do match my phone. (XT1962-1) I'm really struggling to find an explanation for my error message anywhere online.
Code:
fastboot: core/libsparse/sparse.cpp:131: int write_all_blocks(struct sparse_file *, struct output_file *): Assertion `pad >= 0' failed.
zsh: abort (core dumped) fastboot flash partition gpt.bin
A lightning said:
I'm using the latest Android platform tools on Linux. I should have included this in my first message, but this is a Project Fi phone. I tried both builds in the Fi folder of the lolinet link in the OP, and both had the same problem. The model numbers on these do match my phone. (XT1962-1) I'm really struggling to find an explanation for my error message anywhere online.
Code:
fastboot: core/libsparse/sparse.cpp:131: int write_all_blocks(struct sparse_file *, struct output_file *): Assertion `pad >= 0' failed.
zsh: abort (core dumped) fastboot flash partition gpt.bin
Click to expand...
Click to collapse
Post result of
Code:
fastboot --version
adb --version
ptn107 said:
Post result of
Code:
fastboot --version
adb --version
Click to expand...
Click to collapse
Code:
1% fastboot --version
fastboot version 29.0.2-ArchLinux
Installed as /usr/bin/fastboot
% adb --version
Android Debug Bridge version 1.0.41
Version 29.0.2-ArchLinux
Installed as /usr/bin/adb
In addition to my Linux distro's package, I also tried downloading platform-tools with Android sdkmanager and got the same errors,
I've used lineageos 14 in the past but it's been a while.
What advantages does lineageos 16 bring compared to Moto's pie?
ptn107 said:
I'm using the latest Android platform tools on Linux. I should have included this in my first message, but this is a Project Fi phone. I tried both builds in the Fi folder of the lolinet link in the OP, and both had the same problem. The model numbers on these do match my phone. (XT1962-1) I'm really struggling to find an explanation for my error message anywhere online.
Click to expand...
Click to collapse
I'm on FI with the same model.
Have you tried using older fastboot drivers or a different USB-c /USB port?
I sent the OP a pm asking if they would like any help or if they are willing to link us github information so we can start building and improving this for the River device.
Waiting to hear something back
Hell-Razor said:
I sent the OP a pm asking if they would like any help or if they are willing to link us github information so we can start building and improving this for the River device.
Waiting to hear something back
Click to expand...
Click to collapse
https://github.com/SyberHexen Here is his work.
flintman said:
https://github.com/SyberHexen Here is his work.
Click to expand...
Click to collapse
Thats not a guarantee its all the work he has done. He may still be pulling from multiple gits in a script. I would much rather talk to the op and check before trying to jump through loops that could easily be there.
EDIT: I sound like a **** there, I dont mean to be. I am just not great at this stuff so it may be nice to get a little help.
Hi,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 17.1 for Huawei P10 Lite
*** Stable Version ***
About
Code:
[CENTER]LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage OS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
[/CENTER]
Working
Code:
[CENTER]* Touchscreen
* Adb / Mtp
* Audio
* Boot
* Bluethoot
* Internal/External storage
* Sensors
* Wifi
* RIL
* Camera
* Android 10 gestures
* NFC
* FP gestures
[/CENTER]
Not Working
Code:
[CENTER]* Offline charge (It works by switching to permissive selinux)
[/CENTER]
Installation
Code:
[CENTER]* you must also have this recovery version installed : [URL="https://forum.xda-developers.com/p10-lite/development/recovery-twrp-huawei-p10-lite-t3953890"]TWRP[/URL]
* go to TWRP and do a full wipe (system, data, cache, dalvik/art cache) !
* reboot to bootloader
* extract Lineage.zip
* run: fastboot flash system <drag system.img here>
* reboot to TWRP
* reboot to TWRP
* flash gapps(optional)
* flash root(optional)
* flash los_patches_warsaw.zip
NOTE: this zip is needed for having a working build. DO NOT IGNORE IT !
* reboot system
* Enjoy !!![/CENTER]
Update
Code:
[CENTER]* extract the new update of AOSP
* reboot device to : TWRP
* wipe cache, dalvik cache and system
* reboot to bootloader
* extract Lineage.zip
* run: fastboot flash system <drag system.img here>
* reboot to TWRP
* install gapps(optional, needed it you previously had it)
* install los_patches_warsaw.zip
* NOTE: this zip is needed for having a working build. DO NOT IGNORE IT !
* reboot to System
* Enjoy !!![/CENTER]
Download
Code:
[CENTER][URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P10%20Lite/Android-10/LineageOS/"]LineageOS 17.1 and los_patches_warsaw[/URL]
[URL="https://opengapps.org/"]Gapps[/URL]
[URL="https://forum.xda-developers.com/attachment.php?attachmentid=4882825&d=1574332554"]Magisk Phh v19.3[/URL][/CENTER]
Credits:
@phhusson
@Flex1911
@haky 86
@DIl3mm4
@Hami_Do
Please support my work, it's very important! Thanks
DONATIONS
Regards !
XDA:DevDB Information
LineageOS, ROM for the Huawei P10 Lite
Contributors
DarkJoker360
Source Code: http://github.com/DarkJoker360
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x with Unlocked bootloader and TWRP installed
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 17.1
Stable Release Date: 2020-03-09
Created 2020-03-09
Last Updated 2020-03-09
** Reserved **
NOTE: If get error 70 while flashing gapps resize system in TWRP !
Screnshots
just installed this rom after repairing my display and replacing the battery. The rom is smooth and don't seem to have problems till now.
The only thing i noticed is the fingerprint doesn't work.. but i can't say if it's a my problem, i could've attached bad the flat cable.
Chueven said:
just installed this rom after repairing my display and replacing the battery. The rom is smooth and don't seem to have problems till now.
The only thing i noticed is the fingerprint doesn't work.. but i can't say if it's a my problem, i could've attached bad the flat cable.
Click to expand...
Click to collapse
Here it is working as expected.
Very nice rom! ty
Why all roms for p10 lite have Magisk 19.3 and not latest version? And everyone recommend against updating.
Does your version of Lineage support microG?
Thanks!
You said fingerprint gestures work, but does fingerprint work for unclocking the phone? That is the one thing I need to know before installing. Great work though!
popescucr said:
Why all roms for p10 lite have Magisk 19.3 and not latest version? And everyone recommend against updating.
Does your version of Lineage support microG?
Click to expand...
Click to collapse
No
Minecrafted said:
You said fingerprint gestures work, but does fingerprint work for unclocking the phone? That is the one thing I need to know before installing. Great work though!
Click to expand...
Click to collapse
Yes
A good news guys, offline charging has been fixed !
@DarkJoker360 I installed it today. It is great. Ringtones and other sound are missing, must download to work.
EDIT: Solved previous issue with format data to decrypt.
Hi, ive been stuck at installing open gapps.
I get eror 70 insufficent storage space on /system.
I used pico package.
I have WAS-LX1 32GB.
I saw someone had this problem in the aosp thread, and the solution is repartitioning system. Any help on how to do it the safe way?
Thanks!
csoller said:
Hi, ive been stuck at installing open gapps.
I get eror 70 insufficent storage space on /system.
I used pico package.
I have WAS-LX1 32GB.
Any idea?
Thanks!
Click to expand...
Click to collapse
Resize system in TWRP.
DarkJoker360 said:
Resize system in TWRP.
Click to expand...
Click to collapse
Is there a terminal command for it?
I cant find a definitive answer.
Thanks!
csoller said:
Is there a terminal command for it?
I cant find a definitive answer.
Thanks!
Click to expand...
Click to collapse
In TWRP
Wipe> advanced>click on system and click in repair or change> resize system> swipe
DarkJoker360 said:
In TWRP
Wipe> advanced>click on system and click in repair or change> resize system> swipe
Click to expand...
Click to collapse
Thats where I checked.
I only have change file system, I have no resize file system, or repair file system. The buttons are missing. If i select data, its there...
I am using your twrp, should i use the other one?
csoller said:
Thats where I checked.
I only have change file system, I have no resize file system, or repair file system. The buttons are missing. If i select data, its there...
I am using your twrp, should i use the other one?
Click to expand...
Click to collapse
Try with another one, I m fixing that issue...
Thanks, ill try. Its weird because system partition is already 4.8 GB and only 1800 MB is used. I doubt gapps takes up more than 3 gigs...
If I swype right, wil it ask for a partition size, or it will make up its mind?
csoller said:
Thanks, ill try. Its weird because system partition is already 4.8 GB and only 1800 MB is used. I doubt gapps takes up more than 3 gigs...
If I swype right, wil it ask for a partition size, or it will make up its mind?
Click to expand...
Click to collapse
No jt won t ask.
DarkJoker360 said:
No jt won t ask.
Click to expand...
Click to collapse
The option isnt present on Pretoriano80s twrp_p10_lite_0.6_test.img either.
Is there another way to resize system?
I still dont get it how 4.8GB isnt enough tho, the system img is 1.7GB the rest is peanuts, shouldnt the whole thing be like 2.5GB max?
Ill try aosp 10, maybe ill have more luck I like how u can just enter into erecovery and download the official base via wifi. So easy this phone.
AOSP 10 works great, and I still have 2.7 gigs of free space out of 4.6. I sincerely doubt lineage takes up an extra 2.7 gigs, so I think somethings fishy here.
Thanks for the help!
Selinux Status Permissive
Not Working
Code:
[CENTER]* Offline charge (It works by switching to permissive selinux)
I am struggeling! How can I change the Status to pemissive? I already tried an App, tried to setenforce 0 it via terminal and also flashed an permissive Zip via magisk.
Pls help me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Bugs
- NFC
Note: SELinux is enforcing
Installation instructions
- Flash my recovery (see below)
- Go to fastbootd
- Execute the following commands with a PC:
Code:
fastboot erase system
Code:
fastboot erase vendor
Code:
fastboot erase product
- Format data and cache
- Flash the ROM
- (Optional) Flash gapps and/or Magisk
- Reboot
Download
Note: ROM abandoned in favor of miatoll (unified ROMs for curtana, joyeuse and excalibur) builds, please flash other ROMs
- ROM
- Recovery
- GApps aren't included, OpenGapps pico or nano recommended
Sources
- Xiaomi SM6250 common device tree
- Redmi Note 9 Pro device tree
- Xiaomi SM6250 kernel sources
- Xiaomi vendor blobs
Thanks to:
- Erfan Abdi for common device tree
- All the testers that helped me
XDA:DevDB Information
[ROM][UNOFFICIAL][Q] LineageOS 17.1 for Redmi Note 9 Pro [joyeuse], ROM for the Redmi Note 9 Pro
Contributors
SebaUbuntu
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2020-08-08
Last Updated 2020-08-10
Reserved
Thanks for the ROM!
Thanks for this ROM. Finally someone decided to work on Joyeuse LineageOS.
Is it possible to use signature spoofing on this ROM? (MicroG)
Wow. Thanks.
Great work ! Thanks ! It runs perfectly and I enjoy it
Did you sign the build with your own keys or with the public LineageOS keys the come by default?
As in, does LineageOS Trust complain about the keys used for signing?
Can't erase any of the partitions. What to do?
Code:
[Unixsystem ~]$ fastboot erase system
Erasing 'system' FAILED (remote: 'Check device console.')
fastboot: error: Command failed
heyadmwutanime said:
Can't erase any of the partitions. What to do?
Click to expand...
Click to collapse
You must do first : "fastboot reboot fastboot" to inter on fastbootd
DICKO1984 said:
You must do first : "fastboot reboot fastboot" to inter on fastbootd
Click to expand...
Click to collapse
Thank you very much! It worked.
I installed MIUI V11.0.5 before. At flashing LineageOS (ADB sideload inside LOS recovery) it said "patching firmware images". Did it overwrite the firmware then?
How should I root this LineageOS ROM? Same way as https://forum.xda-developers.com/re.../how-to-unlock-root-redmi-9-9s-9-pro-t4108913 and extract boot.img from V11.0.5 vendor image?
This doesnt work on Curtana, does it?
@SebaUbuntu : thank you so much!!! Great work!
@heyadmwutanime : take the boot image from the lineageOS zip and then use the Magisk manager app to create a patched version. goto fastboot and flash patched boot image.
Playing with cams: anx(cannot get portrait to work) gcam versions(different lenses do not work well) Gonna try all over again tomorrow.
kheno said:
[MENTION=9769628]
Playing with cams: anx(cannot get portrait to work) gcam versions(different lenses do not work well) Gonna try all over again tomorrow.
Click to expand...
Click to collapse
Did you install OpenGapps or MicroG to use GCam? I tried sideloading nanodroid zip (including MicroG and patch spoofing) but no recovery (LineageOS recovery or PBRP) is able to do it. Why the heck isn't there a good TWRP recovery yet? :crying:
edit: Sideloading in PBRP isn't possible. Only possible to install zip from internal storage or MicroSD. Bad thing LineageOS boot animation is running forever. :crying: Then how would you even flash OpenGapps?
installed opengapps with the recovery provided. Its the lineage recovery and works.
You can only sideload with this recovery. Make sure you have the latest adb tools.
I had problems with sideloading before, and found out that the adb exec was not the latest version (although the "install" tool was the latest version)
Anx camera is being installed as Magisk module. Or gcam versions were installed as apk and an xml file.
About pbrp, I saw there is a 3.0.0 version available on telegram : joyeuse discussion group.
I have not tried this on yet, still
I also note that some errors (cannot mount system/product/ ...) can be resolved to first unmount those partitions in twrp/pbrp before flashing the file.
If boot anim is running forever, goto recovery and erase cache/data, then reboot.
kheno said:
Playing with cams: anx(cannot get portrait to work) gcam versions(different lenses do not work well) Gonna try all over again tomorrow.
Click to expand...
Click to collapse
Did you install the ANXCustlibs addon from the website? That's needed for portrait mode. This one should be the right version:
MOD EDIT: Link Removed
(taken from their website. Don't own this phone yet so can't test it)
M47Z said:
Did you install the ANXCustlibs addon from the website? That's needed for portrait mode. This one should be the right version:
MOD EDIT: Link Removed
(taken from their website. Don't own this phone yet so can't test it)
Click to expand...
Click to collapse
For me working variant is:
ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip
48MPFixQ_181.GlossyIntelligentCock.zip
Ultra pixel works, camera works, but Portrait mode doesn't work.
Additionally infrared doesn't work.
Auto brightness is too high on daylight. Could you please lower it overall and also bring it to 0% when it's completely dark?
julle131 said:
Did you sign the build with your own keys or with the public LineageOS keys the come by default?
As in, does LineageOS Trust complain about the keys used for signing?
Click to expand...
Click to collapse
I don't use custom keys to sign the build
Yes Trust will complain, but you can ignore the warnings
M47Z said:
Did you install the ANXCustlibs addon from the website? That's needed for portrait mode. This one should be the right version:
MOD EDIT: Link Removed
(taken from their website. Don't own this phone yet so can't test it)
Click to expand...
Click to collapse
I used the 48MPFixQ_170.SophisticatedFatBetafish.zip addon and that one contains CustLibs already it seems.
Tried installing the latest customlibs after uninstalling the 48mpxfix, but that made portrait and 64mpx function not working.
Thanks for the suggestion anyways! it was worth a try. :good:
Sadly the download links for the ROM and Recovery are failing...
---------- Post added at 11:38 PM ---------- Previous post was at 11:23 PM ----------
zzzardoz said:
Sadly the download links for the ROM and Recovery are failing...
Click to expand...
Click to collapse
Never mind, links are working now