Charging issues - Samsung Galaxy Watch

Hi gang,
has anyone noticed odd charging issues - especially around fast charging - where the phone will get to like 70 or 80% and then just stop charging?
I noticed it happening several times with my watch on fast charging. The other thing i noticed is that when i remove the watch from teh charger and then put it back, it will eventually get to 100% but the charger light stays red.
Is the watch potentially overheating? I did buy a protective case from Spigen for it. I'm wondering if that's the root cause. Will try charging again tonight without the case and see if that changes things but thought i'd ask ahead of time.
Thanks.

Just confirmed; Seems a protective case on the watch will cause it to overheat if you fast charge.
Now I gotta decide if I want the case and slow charge or say eff it.

Related

[Q] Galaxy Nexus Charging Problem Backlight Keeps Coming On

I am REALLY unhappy with this phone. Aside from the poor signal and other issues well known to the Nexus, I now have a phone that has a charging problem. Sometimes when I plug the phone in, it does not recognize that it is plugged in and will not charge. This is not an issue in itself, because if I unplug and plug back in a few times it will eventually charge. The big problem is when it is NOT plugged in. The phone will often switch between charging and not charging on the battery indicator.... even though it is NOT plugged in.
I read up on this and found that... shocker.. this is just one more issue plaguing Nexus owners. The real problem for me is that everytime the phone switches from thinking it is charging to not charging, about every two seconds mostly, the screen comes on. This results in the screen constantly going on an off and the battery draining extremely fast. It is 8:17 am, and I unplugged the phone at 6:40 this morning. In less than an hour and a half, the battery has fallen to 38% and I have not used the phone at all today. It is sitting on my desk, flashing like a disco club.
I have searched but have only found an option to keep the phone ON while charging. Is there an option or app available that will prevent the screen from lighting everytime it thinks I have plugged it in to charge? I am rooted, so any option known would be helpful.
I cannot wait to throw this thing in the garbage, but I am not happy with any of the other options currently available. I like the look of the Galaxy S3 but the Gnex has left a bad taste in my mouth for Samsung... it was my first Samsung phone and I'm not sure if I should judge the product line on all the problems I have had with this phone. I loved the HTC Incredible it just got a little old.
Can anyone help me with this problem... please! It is now at 30% since I typed the last few lines. I can sit and watch this thing draining like a bathtub.
Jim
try changing the usb port on the phone
http://www.ifixit.com/Guide/Repairi...zon-LTE-Micro-USB-Charge-Port-Main-Mic/9641/1
I had this issue caused by water damage quite recently - it was in my pocket during some absolutely unprecedented rain here in the UK, and although it seemed I could charge it without problems, when it was off the charger it'd be confused and flash on and off as you say. I just threw it in some rice and took it out at midnight, problem solved (whether the rice was actually responsible for solving it, I have no idea). Has your phone been used in the rain or anything like that, or been in the pocket of clothes that aren't very 'rainproof' during rain? Could be it.
Is it the charger? I had a bad car charger that did the same thing. If not, I would contact Samsung and see what they can do for you.
Sent from my GSM Galaxy Nexus using Tapatalk 2
I read about the water damage being a possible culprit but I cannot remember it getting wet anytime recently. It is not the charger, it does the same thing with two different chargers and the car charger. It does actually charge, thats not the problem. The problem is when I am away from the charger the screen just comes on all the time and the battery is drained rapidly. It has been having issues for a week or two now but just recently started having the problem when not actually plugged in.
Someone just needs to make an app with an option NOT to turn on the touchscreen when first plugged in.
Jim
calaski8123 said:
I read about the water damage being a possible culprit but I cannot remember it getting wet anytime recently. It is not the charger, it does the same thing with two different chargers and the car charger. It does actually charge, thats not the problem. The problem is when I am away from the charger the screen just comes on all the time and the battery is drained rapidly. It has been having issues for a week or two now but just recently started having the problem when not actually plugged in.
Someone just needs to make an app with an option NOT to turn on the touchscreen when first plugged in.
Jim
Click to expand...
Click to collapse
Have you been able to fix your issue? I've had zero issues with my Galaxy Nexus for months, and now I'm having the same problem you describe. Initially I thought it was the ROM, but last Sunday I noticed that the phone will simply not sleep without being charged. The USB port appeared to be bent downward, so I used a tiny flat head screwdriver to raise the port. This seemed to fix the issue for a few minutes, but then the phone kept waking up. It's murdering my battery, and I'd like to fix this situation. The problem seems to be intermittent, and occasionally it will work for hours at a time. This leads me to believe that the problem could be internal.
I'm wondering if you tried anything else? I don't have a problem replacing the USB port myself because it seems like an easy and cheap fix. I'm not a novice when it comes to repairing phones, but I'd rather not open the device quite yet.
The new part is $8.00 shipped, and the seller is in the US. You can't go wrong. I will report back once I fix the problem.
Not really, the problem just sort of went away a week ago... I'm getting the Galaxy S3 end of October so I'm not going to replace the USB port. I messed around with the usb thing too, bent it with a knife so it wasnt touching anything. I also tried cleaning the contacts and blowing it out with air... not sure if any of these things helped or not. Like I said if I made it worse didnt matter as I'm getting GS3 soon. So for now its working but not sure why or how or how long...
Jim
calaski8123 said:
I am REALLY unhappy with this phone. Aside from the poor signal and other issues well known to the Nexus, I now have a phone that has a charging problem. Sometimes when I plug the phone in, it does not recognize that it is plugged in and will not charge. This is not an issue in itself, because if I unplug and plug back in a few times it will eventually charge. The big problem is when it is NOT plugged in. The phone will often switch between charging and not charging on the battery indicator.... even though it is NOT plugged in.
I read up on this and found that... shocker.. this is just one more issue plaguing Nexus owners. The real problem for me is that everytime the phone switches from thinking it is charging to not charging, about every two seconds mostly, the screen comes on. This results in the screen constantly going on an off and the battery draining extremely fast. It is 8:17 am, and I unplugged the phone at 6:40 this morning. In less than an hour and a half, the battery has fallen to 38% and I have not used the phone at all today. It is sitting on my desk, flashing like a disco club.
I have searched but have only found an option to keep the phone ON while charging. Is there an option or app available that will prevent the screen from lighting everytime it thinks I have plugged it in to charge? I am rooted, so any option known would be helpful.
I cannot wait to throw this thing in the garbage, but I am not happy with any of the other options currently available. I like the look of the Galaxy S3 but the Gnex has left a bad taste in my mouth for Samsung... it was my first Samsung phone and I'm not sure if I should judge the product line on all the problems I have had with this phone. I loved the HTC Incredible it just got a little old.
Can anyone help me with this problem... please! It is now at 30% since I typed the last few lines. I can sit and watch this thing draining like a bathtub.
Jim
Click to expand...
Click to collapse
I've got the exact same issues, it's ruining my battery life. Has anyone found a fix for this yet?
Its a physical problem. You need to replace the charging port, or get new phone like me.
calaski8123 said:
Its a physical problem. You need to replace the charging port, or get new phone like me.
Click to expand...
Click to collapse
@calaski8123 -> how would I replace the charging port? Should I contact samsung/google?? I have the exact same issue being discussed here and its driving me nuts. And I got this phone just a couple months ago so getting a new phone is not a solution...
best,
-Nripesh
If its new I'd take it back under warranty. If not, you can buy the parts on ebay and other sites... Search the Forums here, there are details. You can also search Youtube for a guide. Samsung probably would fix but it would cost much more.
Mine is better, but not sure what fixed it. The battery still doesn't last but half a day so I'm still getting the S3 in week or so.
Jim
Gnex Charging Issue
Hi all! Yes, I am another one of the unfortunate owners of a Gnex with this issue. I wanted to send out a reply to everyone that says to replace the USB charging port. I just had mine replaced, and it did not fix the problem. I have also tried different batteries, and I have read where some people are fixing this by *** gently *** bending the USB connector up ( toward the screen ). That also did not fix my problem. A few days ago I installed AOKP 4.2.1, and that was ineffective as well. I am stumped. My Samsung Fascinate was a very good phone, but the Gnex is really making me wonder if I ever want another Samsung. Has anyone found a solution for this? Unfortunately for me, I bought mine used and don't have the option of returning to Verizon for help. Thanks!

Wireless charging full battery behavior

I get a weird behavior when my G3 reaches full battery while wirelessly charging. The phone and charger connect and disconnects about every 3 seconds.
For comparison Using the same charger with my nexus 5 my phone would stay connected even at full capacity (I'm sure it has a internal safeguard for overcharging rather than disconnecting continuously)
I'm using one of those aftermarket qi wireless charging stickers.
(edit) I ended up buying a OEM LG battery door with qi built in. I get the same result. It's the phone.
Anyone else experience this or have a solution?
I have not. I bought an unbranded LG back plate and am using an old nexus 4 orb without any issues. I do not get the "battery 100%" notification, but on the lock screen is says battery fully charged every time I check it, all without any sounds during this time.
Now I'm considering just buying a OEM battery door. ****ing Hassel and waste of money to get the removed functionality back in this phone
LG G3 wireless charging full behavior: http://youtu.be/6e6lfrg2n8I
At least your working... Mine is broken i think.. I have 2 unbranded orb. Charging commenced for 2 weeks. Then suddenly it cannot wireless charge anymore. I think my back cover is broken...
robobear said:
At least your working... Mine is broken i think.. I have 2 unbranded orb. Charging commenced for 2 weeks. Then suddenly it cannot wireless charge anymore. I think my back cover is broken...
Click to expand...
Click to collapse
My concern is for the health of my phone's battery.
Just get insomnia. Then your phone won't stay fully charged that much. LoL I get a new phone a lot so I doubt the batttery will be a issue for me.
I have this issue with the factory USB charger, as do many others. I think it's just something they're going to have to patch out of the software.
I called LG support. They gave me the usual run around. Not to be racists but it was a Indian call center. I could tell that they have never even held the phone on their hands before and they were just reading through the typical responses.
One guy said it was similar to bluetooth disconnecting and re-connecting. I told him please transfer me to someone who knows something about phones. Then I got a girl who said pull the battery out and put it back in. This is the best support I could get...
Sounds like Sprint. LoL
Is my problem a isolated issue? I don't get much feedback from G3 owners
What battery app are you using to see that it disconnects and starts charging again when full. Do you charge the phone when you sleep? Can you charge the phone some before you sleep and then when you wake up? I'm thinking it would take a year + before you have any battery issues if any at all. I think it's software related and who knows if and when it gets fixed. If it bothers you that much why even use wireless charging?
sweets55 said:
What battery app are you using to see that it disconnects and starts charging again when full. Do you charge the phone when you sleep? Can you charge the phone some before you sleep and then when you wake up? I'm thinking it would take a year + before you have any battery issues if any at all. I think it's software related and who knows if and when it gets fixed. If it bothers you that much why even use wireless charging?
Click to expand...
Click to collapse
First I use lightflow to show my charging/charged led indication. Second my actual wireless charger has a led charging /not charging indicator.
All abnormal behavior compared to my nexus 5
This happened to me once but it wasn't while the battery was full. I turned off the phone and took the battery out and after it restarted it hasn't happened again since.

Weird battery and charging issue I need help with!

Been using my Moto 360 for months, no problem. Yesterday I was travelling so I used up more battery before going back to the dock than I usually would. I want to say it was down to maybe 10%. Maybe lower.
Threw it on the charging dock. I see the small blue circle, charging, and I walk away. Come back a few minutes later and the screen was off and white LED on charging dock was off. Couldn't do anything to get the white LED back and show that it was charging. I could pick up the watch and use it, but had very low battery. At some point I think it died, and again, I could never charge it.
Got frustrated, left it off the dock (because I read something on a moto support page about leaving it off the dock for 30 minutes?), and went to bed.
This morning, woke up, and put it on the charger. The white LED came on and the watch booted up. At first it shows charging and even says 13%. How that's possible I don't know, but the white LED wouldn't stay on. It would go off, at which point the regular watchface would show up and also the warning about being below 15%. Then a few seconds later the white LED would come back on and I'd get the charging screen. but that would only last a few seconds, then it would go off, and my watch face would show up. I just watched as it did this and you should see from the times the charging screen did pop up that it was actually draining battery (if you believe I was even at 13% this morning, which I don't). After a few minutes of this, the white LED was off and I can't get it back to charge at all. I'm sitting here this morning just as I did last night: watch won't come on and no white LED light on the dock and what looks like no charging.
What is going on here? Again, ZERO problems until this. Now my battery is so low that it shut off and I'm just leaving it on the dock hoping that somehow it is charging, even though the white LED on the dock is not coming on. I know I shouldnt have let my battery get so low before juicing it up, but that doesn't mean I should be sitting here unable to charge up my watch. I really don't think something all of a sudden yesterday happened to my watch and dock.
Anyone have any ideas here? Im on the road, so no qi plate here to test using a different method to charge it up (I have it at home, but I really wanted my watch to use for this trip!). Don't know anyone with a moto 360 either.
Thank you!!
Try a different USB cable/charging brick combination, they could be bad. If this doesn't work, most likely a bad dock.
Well I tried a different cable, no change. Left it sitting on the dock all day, nothing happened. Came home from going out and the charging/not charging is happening now ( and all of a sudden the watch got juice? Makes no sense to me.). I videoed it. Does this video shed any light on the cause? Thanks! I ask because it's hard to believe the dock is bad after no issues for months now.
Video: https://youtu.be/jmMH15ThOwg
Thanks again.
HEHE, same issue mate:
https://drive.google.com/open?id=0B_Qhf7E5ZWBTbW56elNSVUZLR1E
I have sent mine to Motorola twice now for the same problem.
They just sent the watch back to me and I don't get the issue anymore, however they have introduce a new problem for my watch where I can't even use tilt to wake anymore...
Fed up with their repair team, just asked them to replace the watch now because either their repair team has no clue how to fix it or that there is some other fault they cannot find.
pappy97 said:
tagging pappy97
Click to expand...
Click to collapse
i have a similar issue. it seems that the craddle connection is not as strong as it used to be. I often times see my watch charge all the way to 100%, and then begin to slowly dwindle down. I have to take the watch off the charger and then place it back in "more securely", and then it would charge again.... anyone else?
i think i figured it out. i had a dual USB wall adapter that both my phone and watch were plugged into. only recently did I get a QI wireless charging pad. it appears that when both devices are charging, the phone took up all of the juice, leaving none for the watch (until the phone reached 100%). when I separated the two into different USB wall plugs, then they both charge up as normal.
hope this helps others.
I'm experiencing this exact same issue right now. I'm leaving it on the dock hoping that it starts to charge at some point. Have you discovered a fix or a possible cause for this issue so far?
I'm having the same issue. Started yesterday afternoon. I have 2 charge cradles and its the same on both so it leads me to believe its not a cradle issue. When I put the watch on the cradle, the charge light will come on for a few seconds and then go back off. After this happens a couple times it just wont come on anymore. Any help would be greatly appreciated.
I have the watch for almost 2 weeks and it never charge full and it loose all its charge in minutes I only used it 2 and it was off charge. Wife wi go home I am tired I like the watch. But I didn't use it I tried everything from the above mentioned proposals but seriously nothing worked I'm from Egypt and I bought online from USA from Nordstrom what should I do

Problems charging watch when switched off - overheating

Hi!
I bought my Sony Smartwatch 3 about two months ago. I've always updated the watch and now I'm on the latest build MWD49B.
I don't know precisely when the problem started, but for sure also before updating to the latest build it already showed it.
Basically if the watch is turned off it won't charge and it'll overheat a lot. I mean it maybe charges at an absurd rate, like from 60% to 100% in about 4 hours.
I tried changing charger (1A and 2A) and charging cable, but it doesn't change. It's like stuck in some way. The funny thing is that when it is stuck in this state if I turn it on (with the same chargers and cables) it starts charging fast (normal charging times) and funny enough it gets colder than when it's turned off charging (I mean slightly hot but colder than when it's stuck).
Do any of you has this problem?
Could it be a SW problem too or just HW? I haven't tried to reset it yet, but would rather lose time in resetting it and reinstalling all my stuff than losing time in the RMA process and waiting time to have it repaired, even because thinking of running without it makes me feel already mad!
I also have MWD49B and I'm charging my watch with (AFAIK) a charger which was bundled with Xperia PLAY docking station. Its output is around 500mA. Sometimes I was charging the watch with EP880 charger (output 1,5A) and I was charging it with BlitzWolf charger (output 2,4A). I've never had any problems with overheating and I pretty much never turn off my watch even when charging.
The problem is that some watches (especially the fresh ones from 2014 with glossy grey cap on microUSB port, not the full rubber ones like my watch have) might have faulty battery. If it overheats, charges 4 freaking hours... well it's REALLY long... my 500mA charger charges my watch up to one hour and I have no problems at all...
If you still have warranty, I'd suggest returning the watch, this overheating might be dangerous.
Hi!
Thanks for the answer.
My watch is from an April 2016 batch (written on the box), and it's one of those with the rubber cover on the charging port.
Just to be clear, if I charge the watch when it's ON, I don't have any problem and it is charged in less than one hour, the overheating problem and non-functional charging is present only when the watch is switched off and it is charging.
Me too...
I bought my Sony Smartwatch 3 about one years ago...
Whan I first charge it from PC's USB port , the same problem with you..
I don't know why...even I reset watch , it's the same...
So..I always charge the watch when it's ON...
jackal992 said:
Hi!
Thanks for the answer.
My watch is from an April 2016 batch (written on the box), and it's one of those with the rubber cover on the charging port.
Just to be clear, if I charge the watch when it's ON, I don't have any problem and it is charged in less than one hour, the overheating problem and non-functional charging is present only when the watch is switched off and it is charging.
Click to expand...
Click to collapse
I have the same, "new" batch, with rubber cover on USB port.
I'm not sure if I missed some of your text from the original post or you edited it. I'm talking about switching the watch on so it does not overheat.
I've noticed my watch behaves exactly the same! If it's turned off and charging - it's hot like hell and not even fully charged after two hours and if turned on and charging - cold and fully charged after like... one hour.
Strange because on earlier Android Wear builds everything was ok.
Same over here.
But I didn't try charging it while it is running.
But when it's off, it only charges up to 75% and gets insanely hot. Then, when used it drains normally until around 50%. After that, the battery dies within 1-2h
I also never had any issue with the battery before the last update.
zapp_em said:
Same over here.
it drains normally until around 50%. After that, the battery dies within 1-2h
Click to expand...
Click to collapse
Sign of dead lithium battery
jackal992 said:
Hi!
I bought my Sony Smartwatch 3 about two months ago. I've always updated the watch and now I'm on the latest build MWD49B.
I don't know precisely when the problem started, but for sure also before updating to the latest build it already showed it.
Basically if the watch is turned off it won't charge and it'll overheat a lot. I mean it maybe charges at an absurd rate, like from 60% to 100% in about 4 hours.
I tried changing charger (1A and 2A) and charging cable, but it doesn't change. It's like stuck in some way. The funny thing is that when it is stuck in this state if I turn it on (with the same chargers and cables) it starts charging fast (normal charging times) and funny enough it gets colder than when it's turned off charging (I mean slightly hot but colder than when it's stuck).
Do any of you has this problem?
Could it be a SW problem too or just HW? I haven't tried to reset it yet, but would rather lose time in resetting it and reinstalling all my stuff than losing time in the RMA process and waiting time to have it repaired, even because thinking of running without it makes me feel already mad!
Click to expand...
Click to collapse
I've had this exact problem. One thing I discovered is the battery will stop charging when it reaches a certain temperature. Try placing a fan to blow directly on it while it's charging. This has worked for me.
Sent from my SM-N920T using Tapatalk
jackal992 said:
Hi!
I bought my Sony Smartwatch 3 about two months ago. I've always updated the watch and now I'm on the latest build MWD49B.
I don't know precisely when the problem started, but for sure also before updating to the latest build it already showed it.
Basically if the watch is turned off it won't charge and it'll overheat a lot. I mean it maybe charges at an absurd rate, like from 60% to 100% in about 4 hours.
I tried changing charger (1A and 2A) and charging cable, but it doesn't change. It's like stuck in some way. The funny thing is that when it is stuck in this state if I turn it on (with the same chargers and cables) it starts charging fast (normal charging times) and funny enough it gets colder than when it's turned off charging (I mean slightly hot but colder than when it's stuck).
Do any of you has this problem?
Could it be a SW problem too or just HW? I haven't tried to reset it yet, but would rather lose time in resetting it and reinstalling all my stuff than losing time in the RMA process and waiting time to have it repaired, even because thinking of running without it makes me feel already mad!
Click to expand...
Click to collapse
Same problem here.
I've got the SW3 of 2015 vintage (it does have a cover over USB - I thought they all did?)
Since updating, if watch is off while charging it gets very hot, charges very slowly and never to 100%.
The solution is simple enough - charge it while OS is running.
If the watch is out of juice: Start charging, let it get enough to boot and then again allow it to complete charging with Android Wear running. Then charges normally (about an hour) and doesn't get hot.
My feeling is this is a software issue too. I'm running M1D63G.
Since we all know batteries don't appreciate getting cooked, I'm wary of leaving it charging for long when off, I'm betting it will cause battery damage eventually.
Conspiracy theorist's might even suggest it's Sony's way of ensuring our SW3 batteries die, so we're ready to update to the SW4 - I'm not that cynical.
Hello everyone, here's the matter don't know where to ask it so this thread is similar...
I have 2 Sony3 watches, one with screen partially broken and the second I got it secondhand with a charging base made by the previous owner.
The watch that came with the charge base it always has the charge icon on screen even if it's not charging, sometimes if i reboot it dissapears but most of times it STAY :/
if i turn off watch vibrates and start "charging" all alone without connecting it so i don't know what to do with that cause it obv drains battery and its never really off...
Second thing, my old watch with broken screen worked well since i plug it into that base.... then is doing the same as the other watch, charging forever without charger seems like the base charge illness has affected my old watch too... XD
So pleaaase anybody know something about this? i've restarted them several times and with pcCompanion and the icon remains maybe a custom rom will solve or is hardware issue?
I am using may sony smart watch 3 for long time and i kept it for some month after then i carry it and begin to charge it but it will only show sony and then will not proceed i kept it again after i carry it i plug the charger and it only vibrate
This watch needs to be recalled or have an emergency firmware update. My smartwatch 3 overheated while plugged in overnight and melted apart. Thankfully it was on a metal computer case and not some paperwork. This annoyance has become a real safety issue. It's a shame because I loved this watch otherwise.
Just a general FYI to all of you, use a USB Port or a charger that charges slow and always turn it on when you charge it.
Our watch is really different compared to anything nowadays. It shouldn't but still charges faster than it (should) be allowed.
My Watch is still with it's first Battery and it holds for at least a day, just be careful

General Pixel Stand 2 stops charging

This started happening a couple of weeks ago, prior to the latest update.
When I put my P6P on the Stand 2 at the end of the day, I get the little sound and animation that it started charging. After a few seconds I see the message at the bottom that it's "charging wirelessly" and a time until full. I have the stand set on Max Charging and adaptive charging turned off. After a minute or two, the fan comes on. About 10-15 minutes later, it stops charging, (the message goes away and the current % is shown), and the phone is really hot. No matter how long I leave it, even overnight, it never starts charging again. The phone remains really hot until I remove it from the stand.
About 50% of the time, if I reboot it, it will behave normally again, but last night nothing I did would get it to charge wirelessly. I ended up plugging it into the wire. It never gets warm when charging on the wire.
It has been working fine since I purchased it in Nov. This just started a few weeks ago. Has anyone else seen this?
Dave
Try cable charging.
Charging will disengage if the battery temperature gets too hot, about >103F
Fast charging may disengage if the temperature gets beyond 95-100F.
Ideal charging battery start temp is 82F.
Erratic charging can indicate a failed battery.
Any swelling is a failure, replace asap if so.
blackhawk said:
Try cable charging.
Click to expand...
Click to collapse
As indicated in my OP, cable charging works fine every time. The phone doesn't even get warm. It's only wireless charging that's an issue, and not every time I try to charge it wirelesly. It's like the phone decides to stop accepting the power, and it starts to heat up because of it.
I take it you don't have a second wireless stand to rule out if it's the phone or your STand 2 that's behaving badly?
I have been using a genric set-up from charger to stand with my P6P and did have charging issues a few months ago with wireless charging not working correctly but the May update fixed it.
Dataman100 said:
As indicated in my OP, cable charging works fine every time. The phone doesn't even get warm. It's only wireless charging that's an issue, and not every time I try to charge it wirelesly. It's like the phone decides to stop accepting the power, and it starts to heat up because of it.
Click to expand...
Click to collapse
May be a hardware failure in the phone or stand.
Remove a case if it has one and try.
C ports generally last for thousands of charge cycles and cable charging is better for the battery, produces less heat.
FoneWatcher said:
I take it you don't have a second wireless stand to rule out if it's the phone or your STand 2 that's behaving badly?
Click to expand...
Click to collapse
No, unfortunately I only have one stand. I'll keep trying things to see if I can narrow down the exact situation when it occurs. I was mainly checking to see if anyone else had something similar happen and there was a quick fix.
blackhawk said:
C ports generally last for thousands of charge cycles and cable charging is better for the battery, produces less heat.
Click to expand...
Click to collapse
Yeah, and I've always used cable charging on all my phones in the past with no issues. I thought the stand was cool in that it could fast charge and keep the phone upright so it's easy to read in the middle of the night. I'd really like to keep using it. It was stupid expensive and I'd hate to let it go unused for that price.
Thanks!
Dave
I've been experiencing similar problems with my Stand. Sometimes it charges normally, sometimes it charges REALLY, and I mean really slow... And sometimes I get the "Not charging" message for whatever reason.
I think it's gotta be an issue with the adaptive charging on the Pixel 6 Pro, because every time I put my other phone on the stand, my S21U, it charges without any issues.
Dataman100 said:
Yeah, and I've always used cable charging on all my phones in the past with no issues. I thought the stand was cool in that it could fast charge and keep the phone upright so it's easy to read in the middle of the night. I'd really like to keep using it. It was stupid expensive and I'd hate to let it go unused for that price.
Thanks!
Dave
Click to expand...
Click to collapse
Yeah, I feel you. It could be firmware, a SEU which are rare but do happen. A reflash would fix it if so. Probably not worth the trouble to try and more likely to be hardware.
Cable charging be the best plan for now I think.
The old micro connectors were horrible and invariably would fail. The C connectors are much more robust. This N10+ is heavily used and the C port jack is still tight and has well over a thousand cycles plus a few drops and pulls. Even the original cable is still AOK.
Just came across this thread while looking for similar problems on my P4 with a 1st Gen stand. The phone showed the normal 'xx% charging wirelessly' display then at 79% it changed to simply '79%'. After a while the message went back to 'xx%charging wirelessly'. I took the phone off the charger and using a utility app called 'inware' I looked at the battery temp which was at 41.5C/106F.
So I'm guessing that the phone will stop charging when the battery gets hot and resume when it cools down a bit. What is 'too hot' and when does it cause damage, I have no idea. Google told me in a chat session the other day that it's perfectly acceptable to leave the phone on the stand all day. Personally, I take it off at about 80% charge which lasts me all day.
Mine also has this behaviour, taking it off and placing it back on continues to charge
I just sent my stand back for similar reasons - not good when a $12 Qi charger from Amazon was doing a better (and faster!) job charging.
I sent mine back too & am now using a charger that I bought at IKEA for £5. It's a shame as I thought that Google would have made more effort to integrate the charger & phone. Oh well, bling gone!

Categories

Resources