Just want to sharing some alternative to making our D6603 sounds boom... and seems can implement to other phone because all of components that i have installed are universal (wish work on all phone other than D6603), just try it but don't blame me
After fighting about 2 weeks to getting DOLBY (effect) including VIPER4 in my D6603 with latest CARBON Rom, finally i found an alternative for that.
Because when i try to install Dolby Atmos (standard/unity) always "unsuccessful", installed but no app in drawer that made me headache
My phone configuration :
- Magisk 17.1 + init.d injector
- SELinux permissive.
- AML and ACP installed. Get in here (for supersu seems AML modul not necessary because the installer will search magisk directory, so you just need ACP modul)
- Viper4 FX from here
- DOLBY DIGITAL PLUS for 8.x (i found in somewhere at XDA, thanks already make it work on OREO :good: really appreciate it)
Step: i am installing all components below via TWRP (you can try with your own way)
1. DDP.
2. VIPER4FX. (to escape from Viper4 FX asking the driver installing repeatedly, please install it after DDP or other sound mod.)
3. ACP (additional).
4. AML (essential), better doing at last because will detect and patching audio module on DDP and VIPER4 for compatibility.
On each step i do reboot then back again to TWRP (only want to making sure the components already installed).
When all done let try boot to system and open Viper4 (check the driver is installed or no), next playing the music, the lasting is open DDP to getting more bass. ENJOYING your music.
Noted: for compatibility reason i remove musicfx/audiofx from system. please do backup first.
Results :
- Phone speaker, WORK.
- Headset, WORK.
- Bluetooth speaker, WORK.
- Jack 3.5, WORK.
Playing music via Spotify and internal player all work.
If it work on different Phone than OP, please report back. Would be appreciate it.
Thanks to
- @Myself5 for Carbon Rom
- @guitardedhero @worstenbrood for DOLBY DIGITAL PLUS 8.x
- @nailyk for the TWRP
- @ahrion @Zackptg5 for Viper4 FX AML ACP
- @topjohnwu for Magisk
- @matt1313 that already provide DDP installer for 8.x
Work like a charm
Thank you
Can I somehow only get the Dolby?
RaySupreme said:
Can I somehow only get the Dolby?
Click to expand...
Click to collapse
Yes, you can.
Simply flashing the package right? No need of anything else
RaySupreme said:
Simply flashing the package right? No need of anything else
Click to expand...
Click to collapse
Correct. Just flashing all packages, and i suggest you to install Viper4 at the end (if you prefer)
If SELinux is enforcing this won't work?
vinoxflame said:
If SELinux is enforcing this won't work?
Click to expand...
Click to collapse
DDP need permissive mode, will set by dolby.sh in init.d
If your rom doesn't have init.d but you use Magisk, just copy dolby.sh to /sbin/.core/img/.core/ service.d or post-fs-data.d
Viper4 can work on enforcing mode.
alfan.y said:
DDP need permissive mode, will set by dolby.sh in init.d
If your rom doesn't have init.d but you use Magisk, just copy dolby.sh to /sbin/.core/img/.core/ service.d or post-fs-data.d
Viper4 work on enforcing mode.
Click to expand...
Click to collapse
Will this work on S7 Oreo supersu root?
COOL
slimcyril said:
Will this work on S7 Oreo supersu root?
Click to expand...
Click to collapse
Why not try it and report back
For supersu i think you just need DDP, ACP, VIPER4 and making sure your init.d and permissive are work.
Those modules can install on Magisk or System.
alexaander said:
COOL
Click to expand...
Click to collapse
it's work for you?
alfan.y said:
Why not try it and report back
For supersu i think you just need DDP, ACP, VIPER4 and making sure your init.d and permissive are work.
Those modules can install on Magisk or System.
Click to expand...
Click to collapse
Didn't work on stock S7 supersu root
slimcyril said:
Didn't work on stock S7 supersu root
Click to expand...
Click to collapse
For dolby or Viper4 that don't work? Have you set permissive mode for dolby?
alfan.y said:
For dolby or Viper4 that don't work? Have you set permissive mode for dolby?
Click to expand...
Click to collapse
Yes & was permissive, viper works but Dolby force closes
slimcyril said:
Yes & was permissive, viper works but Dolby force closes
Click to expand...
Click to collapse
your init.d work, right? Because i just try installed DDP only on 5.x firmware with supersu and work :good:. How about /system/su.d any issue or no?
In my opinion, this DPP actually can running on 5.x-8.x firmware with supersu/magisk. See this video to confirm on 5.x ...sorry, no idea probably the issue came from stock rom.
alfan.y said:
your init.d work, right? Because i just try installed DDP only on 5.x firmware with supersu and work :good:. How about /system/su.d any issue or no?
In my opinion, this DPP actually can running on 5.x-8.x firmware with supersu/magisk. See this video to confirm on 5.x ...sorry, no idea probably the issue came from stock rom.
Click to expand...
Click to collapse
DDP doesn't work on all 8.x firmware & works on older android, it might work for you but not everyone, thus it was said in Arise thread that DDP won't work on all 8.x, init.d & su.d works here.
Im using redmi 4x with latest aex oreo rom
- works on speaker
- DDP crashes sometimes
- when using headset both DDP and Viper doesnt works on spotify and music player, but in youtube or other video player it works well.
Maybe you can help me fixing this problems, thanks
Related
Hey guys. I'm trying to get viper4android working on my Nexus 5x running the most recent stable version of Dirty Unicorns.
I tried just normally installing the apk. Changing selinux to permissive. I have the newest version of su and BusyBox installed and yet the driver refuses to install. Every time I restart my phone it says I need to install the driver.
I've been looking around online and I can't seem to find a good answer for what exactly I need to do to get it working.
The popular thread in the Nexus 6 section has way to much info and I just can't follow it to install it properly. I basically want viper4android so I can use pulse with Spotify.
Any help would be appreciated. Thank you!
Flash either of these ViperAudio or ViperAtmos (if you want Dolby Atmos too) in TWRP. It works even with systemless root and enforcing SELinux.
przemcio510 said:
Flash either of these ViperAudio or ViperAtmos (if you want Dolby Atmos too) in TWRP. It works even with systemless root and enforcing SELinux.
Click to expand...
Click to collapse
Worked great! Thank you very much for the help!
Hello everybody. I have Magisk and couldn't install Viper module, neither the usual viper .zip via TWRP.
Have you been able to install any of the available audio mods on your Z2 Play?
I too am interested.
I prefer the Atmos version, ViPERAtmos 4.8 Sony Beats Universal Edition, but I don't think it's compatible with Nougat.
Any advice would be greatly appreciated!
I installed ARiSE sound system in my z2 play, which contains Viper and Dolby Atmos
I have a module called viper 4arise installed and its working very well
danielmn97 said:
I installed ARiSE sound system in my z2 play, which contains Viper and Dolby Atmos
Click to expand...
Click to collapse
Could you post a link to the download / thread that worked for you? I can try to install and make a simple tutorial for other folks.
Thanks!
Here https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 install the last stable version
Thanks! I've looked at ARISE a few times, but it seems life meant steps to install. I guess I'm going to have to bear it.
Does it sound as good at Atmos?
I manage to install it. It's overall pretty simple. You can extract the installation .prop file to /emulated/0 and edit it there to get a 1 cycle install. Otherwise your first try will do just that and return an error (so you'll have to edit the file anyways).
I tried all versions of viper there but none worked (all showed abnormal status) also, remember to mark for installation the Magisk compatibility.
I'm using Atmos, working very nicely, but still wish Viper had worked...
dainezi said:
I manage to install it. It's overall pretty simple. You can extract the installation .prop file to /emulated/0 and edit it there to get a 1 cycle install. Otherwise your first try will do just that and return an error (so you'll have to edit the file anyways).
I tried all versions of viper there but none worked (all showed abnormal status) also, remember to mark for installation the Magisk compatibility.
I'm using Atmos, working very nicely, but still wish Viper had worked...
Click to expand...
Click to collapse
That's weird, I have Viper and atmos working in my device. Previously I set SElinux permissive and installed Busybox
Oh that must be it. I have it on enforcing. Will test with permissive then. Thanks!
Well, it worked! AriSE with SELinux mode changer set to permissive.
Thanks a lot!
With Dolby and viper our speakers sound WAY better! Headphones are even more awesome!
Good news for Mi A1 user's
I tested Dolby Atmos™ Axon 7 Oreo port
Standard 20180219 -
- Expiration met for the Dolby Atmos
Demo Video component after confirmation
of its lack for volume support indicated a
native "bug" and not a porting shortcoming.
- A reduction of 67MB, uncompressed, now
totaling 15.49MB uncompressed, without
the Dolby Atmos Demo Video component.
- Abandonment of the recently introduced
libsurround_proc.so library (suspect of recent
audio unpleasantness) from the Nokia
6 Official Oreo build that was paired with
that same firmware's Dolby Surround Sound
Settings' menu as an additional apk that is
currently still included and still in its trial
period.
- SUBSTANTIAL adjustments, additions, and
improvements to every script - installation
and boot scripts, the most comprehensive
update for this shell component thus far.
Warning !!!
Originally Posted by Ni9e.
If after flashing this you are stuck on bootloop or boot screen then dont worry it happened with me aswell and here is the complete tutorial to successfully install this module. Follow step by step:
1. Reboot to recovery and flash Dolby file
2. Goto Reboot menu in recovery and select partition B
3. Now Reboot to recovery again
4. Flash Dolby file again
5. Goto Reboot menu and this time select partition A
6. Reboot system now and enjoy !!!
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
Flash ok with TWRP 3.2.1.2 Magisk v16.4
Could you give me a feedback on your audio impressions of this Dolby Atmos ....
Works fine on mi a1 with last firmware.
Thanks for share.
app force closes before even starting
Does it require the magisk audio modification library?
Alexx237 said:
app force closes before even starting
Does it require the magisk audio modification library?
Click to expand...
Click to collapse
Same here , it says "DolbyAtmos has stopped"
Alexx237 said:
app force closes before even starting
Does it require the magisk audio modification library?
Click to expand...
Click to collapse
AlwaysWin said:
Same here , it says "DolbyAtmos has stopped"
Click to expand...
Click to collapse
Have installed SELinux permissive script module in Magisk?
pedrazadixon said:
Have installed SELinux permissive script module in Magisk?
Click to expand...
Click to collapse
Yes have it installed already v1.1
---------- Post added at 03:47 PM ---------- Previous post was at 03:45 PM ----------
Device Mi A1 , with Magisk v15.3 and TWRP 3.2.1 SELinux permissive v1.1
it force closed on me too, i have installed selinux permissive script v1.2
pedrazadixon said:
Have installed SELinux permissive script module in Magisk?
Click to expand...
Click to collapse
Yes, I have the 1.2 version installed
Alexx237 said:
Yes, I have the 1.2 version installed
Click to expand...
Click to collapse
Works fine here .
Working fine for me now , The issue was with the SELinux magisk module , I just completely removed it and reboot , everything works fine now
Alexx237 said:
app force closes before even starting
Does it require the magisk audio modification library?
Click to expand...
Click to collapse
AlwaysWin said:
Same here , it says "DolbyAtmos has stopped"
Click to expand...
Click to collapse
AlwaysWin said:
Yes have it installed already v1.1
---------- Post added at 03:47 PM ---------- Previous post was at 03:45 PM ----------
Device Mi A1 , with Magisk v15.3 and TWRP 3.2.1 SELinux permissive v1.1
Click to expand...
Click to collapse
jack404 said:
it force closed on me too, i have installed selinux permissive script v1.2
Click to expand...
Click to collapse
Alexx237 said:
Yes, I have the 1.2 version installed
Click to expand...
Click to collapse
Reinstall pemissive module restart
If still not working
Flash dolby zip again without deleting it
Working fine for me now
t0per666 said:
Reinstall pemissive module restart
If still not working
Flash dolby zip again without deleting it
Working fine for me now
Click to expand...
Click to collapse
Working fine here too , prblm was with the module itself!
Thanks though
Alexx237 said:
Yes, I have the 1.2 version installed
Click to expand...
Click to collapse
No other mod sound installed ?
give me screenshot of module in magisk
For all who have trouble to run Dolby Atmos make sure that you have no other sound module that could cause a bug ... and install selinux magisk 1.2 before flashing dolby Atmos zip with TWRP 3.2.1.1 ok Boys
laugeek57 said:
No other mod sound installed ?
give me screenshot of module in magisk
Click to expand...
Click to collapse
So, I did a fresh rom install;
I then installed magisk, through magisk I installed the SElinux permissive script(v1.2), and proceeded to flash dolby atmos.
But still... It force closes...
Alexx237 said:
So, I did a fresh rom install;
I then installed magisk, through magisk I installed the SElinux permissive script(v1.2), and proceeded to flash dolby atmos.
But still... It force closes...
Click to expand...
Click to collapse
Rom? prerooted 16 jan bye Sooti or other?
Screenshot modules in magisk
laugeek57 said:
Devices and Rom ??
Screenshot modules in magisk
Click to expand...
Click to collapse
I tried it on both A-ONE 8.0 - OPR1.170623.026 Jan, and 7.12.29 - OPR1.170623.026.
But the result is the same
Oh, and The only modules in magisk are dolby atmos, SElinux permissive script v1.2
Alexx237 said:
I tried it on both A-ONE 8.0 - OPR1.170623.026 Jan, and 7.12.29 - OPR1.170623.026.
But the result is the same
Oh, and The only modules in magisk are dolby atmos, SElinux permissive script v1.2
Click to expand...
Click to collapse
There is a step that did not work properly because before posting this thread I installed and reinstalled this module several times and it worked perfectly
What version of Dolby Atmos ?
laugeek57 said:
There is a step that did not work properly because before posting this thread I installed and reinstalled this module several times and it worked perfectly
What version of Dolby Atmos ?
Click to expand...
Click to collapse
I don't know what I may have done wrong, mate :/
The version of dolby I flashed is: DolbyAtmos_Axon7_Oreo_20180122-2(I also tried 20180122-1)
I have had Redmi Note 8 Ginkgo since December. From then on, I am waiting patiently for the appearance of refined custom roms. Recently, roms have finally appeared where all camera lenses work! But I miss one thing very much... Since I had the RN4x I have been using the Dolby Plus mod. In the RN8 it clearly improves the sound, has more bass and is louder. I mean the sound on the built-in speaker, not on the headphones. Dolby Plus can handle bass better on the built-in speaker than the Viper4Android.
This mod however requires SeLinux to be permissive. All android 10 roms that I tried have a SeLinux Enforced kernel - for some reason switching between enforce and permissive is blocked. Even some roms do not allow flash another kernel.
How do I unlock the ability to switch Selinux enforced to perrmisive when the magisk SELinux Manager module is not working?
kaem84 said:
I have had Redmi Note 8 Ginkgo since December. From then on, I am waiting patiently for the appearance of refined custom roms. Recently, roms have finally appeared where all camera lenses work! But I miss one thing very much... Since I had the RN4x I have been using the Dolby Plus mod. In the RN8 it clearly improves the sound, has more bass and is louder. I mean the sound on the built-in speaker, not on the headphones. Dolby Plus can handle bass better on the built-in speaker than the Viper4Android.
This mod however requires SeLinux to be permissive. All android 10 roms that I tried have a SeLinux Enforced kernel - for some reason switching between enforce and permissive is blocked. Even some roms do not allow flash another kernel.
How do I unlock the ability to switch Selinux enforced to perrmisive when the magisk SELinux Manager module is not working?
Click to expand...
Click to collapse
Try the following Magisk module. Download and install it via TWRP: SELinux Switch
shadowstep said:
Try the following Magisk module. Download and install it via TWRP: SELinux Switch
Click to expand...
Click to collapse
Please read the last sentence of my post. I used two ways to change selinux, they work on miui, on
other custom android pie roms. Is this module from you unique?
kaem84 said:
Please read the last sentence of my post. I used two ways to change selinux, they work on miui, on
other custom android pie roms. Is this module from you unique?
Click to expand...
Click to collapse
I did read your entire post. I was just offering an alternative, so whether or not you want to give it a shot, is upto you. If it works for you, great. If it doesn't, get in touch with your ROM developer. Over, and out. :good:
SELinux
There's an app called SELinux mod changer, try that. I used that to change permission to permissive on my ginkgo(Android 10) and it works perfectly.
shadowstep said:
I did read your entire post. I was just offering an alternative, so whether or not you want to give it a shot, is upto you. If it works for you, great. If it doesn't, get in touch with your ROM developer. Over, and out. :good:
Click to expand...
Click to collapse
Respect man, this magisk module works!
The few modules that I was using apparently did not work properly with android 10. I thought the kernel was blocked in some way, and this is a matter of choosing the latest selinux switcher.
Here is the link to the source where this magsik SELinux Switch module comes from:
https://github.com/nipunnarang/selinux-switch
Do you know how with some magisk module or buildprop modification to:
- set the back button to close / kill the application
- the appearance of recent applications was like in android oreo?
I found scripts for it once, modules and now I can't. I prefer not to install xposed
kaem84 said:
Respect man, this magisk module works!
The few modules that I was using apparently did not work properly with android 10. I thought the kernel was blocked in some way, and this is a matter of choosing the latest selinux switcher.
Here is the link to the source where this magsik SELinux Switch module comes from:
https://github.com/nipunnarang/selinux-switch
Do you know how with some magisk module or buildprop modification to:
- set the back button to close / kill the application
- the appearance of recent applications was like in android oreo?
I found scripts for it once, modules and now I can't. I prefer not to install xposed
Click to expand...
Click to collapse
Good to know it works. I made it. The link you've provided is my GitHub. Also, no, I don't know if there's a Magisk module for those two things. For the former, you can try using Button Mapper. It requires root, but not Xposed. And for old Oreo style recents, it needs a modification to the ROM, which can't be done via a simple Magisk module.
Hello,
Has anyone here been able to use some Magisk module or any other way to enable Dolby Atmos on these phones? I've tried 3 or so different Atmos Magisk modules now and every one of them froze the phone on either the Google logo or on the boot animation (and I had to manually reflash, remove the module files and reinstall Magisk).
The three I've tried already:
some random one from the forums (author hellboy017, for 1+ 8 series) - I don't remember where I got it from anymore
Dolby Atmos Magic Revision
Dolby Atmos Razer Phone 2
None of these worked. By the way I'm not running stock but Evolution X instead - latest build of it. I don't think it matters but I mentioned just in case it does.
I'd like to get Atmos working because I got a 3mo trial of Apple Music which supports Atmos but not on Pixels. My $300 Samsung supports it...
I can't help with Dolby Atmos but you can use viper4android re
GitHub - AndroidAudioMods/ViPER4Android: ViPER4Android app configuration files
ViPER4Android app configuration files. Contribute to AndroidAudioMods/ViPER4Android development by creating an account on GitHub.
github.com
Well, I installed porting Moto G52 dolby and it's working in my Pixel 6 pro.
Kris Chen said:
Well, I installed porting Moto G52 dolby and it's working in my Pixel 6 pro.
Click to expand...
Click to collapse
Link?
Kris Chen said:
Well, I installed porting Moto G52 dolby and it's working in my Pixel 6 pro.
Click to expand...
Click to collapse
Using Magisk Delta? I tried installing it multiple ways - direct install, recovery sideload, patching boot image with and without uninstalling normal Magisk before, but I get the same issue - the EvoX boot animation stops after a few seconds, then it resumes after a few seconds and this goes on without booting... Tried ADB to get some insight but windows says that the device couldn't be recognized.
KszKristof said:
Using Magisk Delta? I tried installing it multiple ways - direct install, recovery sideload, patching boot image with and without uninstalling normal Magisk before, but I get the same issue - the EvoX boot animation stops after a few seconds, then it resumes after a few seconds and this goes on without booting... Tried ADB to get some insight but windows says that the device couldn't be recognized.
Click to expand...
Click to collapse
Yes, I use Magisk Delta but stock A13 ROM with May security patch.
Suavie103 said:
Link?
Click to expand...
Click to collapse
*** As modder's suggestion, you may need to have magisk delta and make it work ***
1. Install Moto Core in Magisk Manager(https://www.pling.com/p/1978575/)
2. Install G52 in Magisk Manager(https://www.pling.com/p/1908400/)
3. If you have multi audio mod, remeber to install AML(https://www.pling.com/p/1981006/)
4. Install this EQ profile patch in Magisk Manager(https://djxmaza.in/when-to-hoard-and-cash-out-in-crypto-trading/)
Good luck !
Kris Chen said:
*** As modder's suggestion, you may need to have magisk delta and make it work ***
1. Install Moto Core in Magisk Manager(https://www.pling.com/p/1978575/)
2. Install G52 in Magisk Manager(https://www.pling.com/p/1908400/)
3. If you have multi audio mod, remeber to install AML(https://www.pling.com/p/1981006/)
4. Install this EQ profile patch in Magisk Manager(https://djxmaza.in/when-to-hoard-and-cash-out-in-crypto-trading/)
Good luck !
Click to expand...
Click to collapse
the step 4 link not right?
chen1136a said:
the step 4 link not right?
Click to expand...
Click to collapse
Why don't you think it's not right ?
That version is the mod of AML to make it more compatible with multi audio mod in your phone.
Don't know when will be blocked by admin but I I still posted the discussion board here