Guys, currently I'm on October 1st, 2018 Security Patch. I have the system image of April 1st, 2018 for flashing through fastboot, both android 8.0.0.
If I flash it, will my phone get stuck in bootloop or will it work?
My last phone got hardbricked because I unintentionally flashed android 6 Marshmallow after updating to Nougat, so now I'm afraid of hardbricking my new smartphone just because of the security patch.
Please someone give me an advise. (If there would be a link for a system image of october 2018 I'd appreciate haha)
My device was on Oct security before I unlocked it, I am now on the stock April patch firmware with no issues. However, I wish to relock my bootloader now and this is not possible because there is no later firmware than April available. When trying to lock, it fails with security downgrade.
Cupcake 1.5 said:
My device was on Oct security before I unlocked it, I am now on the stock April patch firmware with no issues. However, I wish to relock my bootloader now and this is not possible because there is no later firmware than April available. When trying to lock, it fails with security downgrade.
Click to expand...
Click to collapse
Thanks for your feedback, however there IS a later firmware, more precisely the October firmware.
Thanks to @Junior Passos for this: https://androidfilehost.com/?fid=11410932744536987421
xdaVTU said:
Thanis for your feedback, however there IS a later firmware, more precisely the October firmware.
Thanks to @Junior Passos for this: https://androidfilehost.com/?fid=11410932744536987421
Click to expand...
Click to collapse
Oh thanks, didn't know. I shall try lock bootloader with this one.
Cupcake 1.5 said:
Oh thanks, didn't know. I shall try lock bootloader with this one.
Click to expand...
Click to collapse
Please, do it at your own risk. I just shared the link, credits go to Junior. If you care about the file's source, this is the link:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
xdaVTU said:
Please, do it at your own risk. I just shared the link, credits go to Junior. If you care about the file's source, this is the link:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Should be fine, I am on OPSS27.76-12-25 which is April. The October patch was on my device before unlocked.
Although there is an extra S in this one. Mine is OPS27.
Could you show where the junior shared the link?.
Cupcake 1.5 said:
Should be fine, I am on OPSS27.76-12-25 which is April. The October patch was on my device before unlocked.
Although there is an extra S in this one. Mine is OPS27.
Could you show where the junior shared the link?.
Click to expand...
Click to collapse
Sorry, he didn't share on the forum yet, however it's in his afh. He took from the last link I shared here.
If you pay attention to the image below, which is my smartphone settings, the version has 2 "S", and it's the stock one. I've never unlocked this phone. So it's okay, the october patch has the second S.
xdaVTU said:
Sorry, he didn't share on the forum yet, however it's in his afh. He took from the last link I shared here.
If you pay attention to the image below, which is my smartphone settings, the version has 2 "S", and it's the stock one. I've never unlocked this phone. So it's okay, the october patch has the second S.
Click to expand...
Click to collapse
I see, so the other S could be something with the new security patch. Unless we have different Z2p. Mine is UK one, but I am sure I read somewhere that there is only one line of firmware for this device, unlike my G5 plus before this that had several versions of the G5 plus.
Yours is Brazil retail mine is Vodafone UK which is a different software Chanel. But the device is same I am sure.
Cupcake 1.5 said:
I see, so the other S could be something with the new security patch. Unless we have different Z2p. Mine is UK one, but I am sure I read somewhere that there is only one line of firmware for this device, unlike my G5 plus before this that had several versions of the G5 plus.
Click to expand...
Click to collapse
Mine ir BR, idk if there is a difference about it
But yes, the other S is normal on october patch
xdaVTU said:
Mine ir BR, idk if there is a difference about it
But yes, the other S is normal on october patch
Click to expand...
Click to collapse
Is yours xt1710-09 in hardware info?
Cupcake 1.5 said:
Is yours xt1710-09 in hardware info?
Click to expand...
Click to collapse
Xt1710-07, brazillian variant
I don't think it's difference between each variant
xdaVTU said:
Xt1710-07, brazillian variant
I don't think it's difference between each variant
Click to expand...
Click to collapse
Ok, I gonna try it because I really would like to know if I can relock.
Cupcake 1.5 said:
Ok, I gonna try it because I really would like to know if I can relock.
Click to expand...
Click to collapse
Good luck! Really hope everything goes fine for you
xdaVTU said:
Good luck! Really hope everything goes fine for you
Click to expand...
Click to collapse
It booted, and gpt and bootloader passed with no errors, meaning I can lock with this firmware.
Cupcake 1.5 said:
It booted, and gpt and bootloader passed with no errors, meaning I can lock with this firmware.
Click to expand...
Click to collapse
Everything working?
xdaVTU said:
Everything working?
Click to expand...
Click to collapse
It was lol. I tried to lock and it would not boot. Also lost recovery, just black screen. I got twrp back on so should be recoverable.
Cupcake 1.5 said:
It was lol. I tried to lock and it would not boot. Also lost recovery, just black screen. I got twrp back on so should be recoverable.
Click to expand...
Click to collapse
So it's not working... Sorry for that.. btw, do you remember what is the name of the version of April security patch?
xdaVTU said:
So it's not working... Sorry for that.. btw, do you remember what is the name of the version of April security patch?
Click to expand...
Click to collapse
This one: https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153
I have recovery back. That was a close one!
Cupcake 1.5 said:
This one: https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153
I have recovery back. That was a close one!
Click to expand...
Click to collapse
If you want to try again, try following this video https://www.youtube.com/watch?v=PqcF9blgBdA&feature=youtu.be
but obviously with the october patch
Related
Updates for people who can't get updates. All files are ADB sideload. Remember any of this files will wipe your phone, so make sure you have backup.
I'm not responsible for what happens to phone after you flash.
Unreleased updates :
All of files below are released by AT&T already :
N920AUCS4EQH1-to-S4EQJ1 -November 7th 2017 with October 1st security
N920AUCS4EQG1-to-S4EQH1 - August 25, 2017 with August 1st security
N920AUCS4EQF1-to-S4EQG1 Released on July 31st with July 1st 2017 security
N920AUCS4EQE1 to S4EQF1 Released on June 21st with June 1st 2017 security
N920AUCS4EQD1-to-S4EQE1 - Released on May 24th with May 1st security
N920AUCU4EQC6-to-S4EQD1 - Released on April 27 with April 1st security
norbarb said:
Updates for people who can't get updates. All files are ADB sideload. Remember any of this files will wipe your phone, so make sure you have backup.
I'm not responsible for what happens to phone after you flash.
All of this files are from AT&T servers.
N920AUCS4EQD1-to-S4EQE1 - Unreleased yet
N920AUCU4EQC6-to-S4EQD1 - Released on April 27 with April 1st security
Click to expand...
Click to collapse
Thanks very much, any info on what this update does? A security patch I'm guessing!? Also thanks for keeping us updated, I really appreciate your time taken out
Aurey24 said:
Thanks very much, any info on what this update does? A security patch I'm guessing!? Also thanks for keeping us updated, I really appreciate your time taken out
Click to expand...
Click to collapse
It s small update and i think this is only security update
I updated OP with last security update.
On Edge of Galaxy
norbarb said:
Updates for people who can't get updates. All files are ADB sideload. Remember any of this files will wipe your phone, so make sure you have backup.
I'm not responsible for what happens to phone after you flash.
All of this files are from AT&T servers.
N920AUCS4EQD1-to-S4EQE1 - Released on May 24th with May 1st security
N920AUCU4EQC6-to-S4EQD1 - Released on April 27 with April 1st security
Click to expand...
Click to collapse
What's new on the updates?
nedo_iv said:
What's new on the updates?
Click to expand...
Click to collapse
I think this are just security updates, but I did not update yet of my wife's note 5
On Edge of Galaxy
jaritico said:
why says this? :crying:
Click to expand...
Click to collapse
Because 99.9% of the time when something bad happens to devices are user error. I did flash so many times so many things to my phones and never had any problem. Also I know this files are good because so many users flash them. So if you flash this and your phone do not start in example, this mean you did something wrong and I'm not responsible for what you did.
On Edge of Galaxy
something new about note 5 in july, I'm at QE1 now
thien191189 said:
something new about note 5 in july, I'm at QE1 now
Click to expand...
Click to collapse
I did update first page
norbarb said:
I did update first page
Click to expand...
Click to collapse
tks brother, ilive outside us so i need your help so much, tks again
Thx man.. thx for keeping us from outside US updated.
Thank
thanks!
Thanks Bro
Thanks, bro.
Have a good day.
norbarb said:
Updates for people who can't get updates. All files are ADB sideload. Remember any of this files will wipe your phone, so make sure you have backup.
I'm not responsible for what happens to phone after you flash.
All of this files are from AT&T servers.
N920AUCS4EQE1 to S4EQF1
N920AUCS4EQD1-to-S4EQE1 - Released on May 24th with May 1st security
N920AUCU4EQC6-to-S4EQD1 - Released on April 27 with April 1st security
Click to expand...
Click to collapse
redklaver said:
Thx man.. thx for keeping us from outside US updated.
Click to expand...
Click to collapse
quynhchi2901 said:
Thank
Click to expand...
Click to collapse
huynhlam said:
thanks!
Click to expand...
Click to collapse
ductruong91 said:
Thanks Bro
Click to expand...
Click to collapse
prosecutor_Rin said:
Thanks, bro.
Have a good day.
Click to expand...
Click to collapse
I updated OP with some more updates
BTW just for venting here... In OP over 150 people download attachment and just 8 (eight) have it click "Thank You" . What is going on with rest of 146. They think they deserved this just because they exist... Get this files by your self next time, we see how you do..
norbarb said:
BTW just for venting here... In OP over 150 people download attachment and just 8 (eight) have it click "Thank You" . What is going on with rest of 146. They think they deserved this just because they exist... Get this files by your self next time, we see how you do..
Click to expand...
Click to collapse
Feel bad about that. Hey, XDAer, Please respect the efforts. Without norbarb's contribution, getting an update on time with easy download would be much difficult. Just express your express.:good:
Thank u so much.
tks again brother, need u every month hihi!
Hi, I've been through a problem with my MZP after I flashed retbr stock rom. I'm in the latest security patch level, android 7.1.1, everything is okay, but the camera does not focus in nothing. I'm not able to take photos of the computer because it gets veeeeery blurry, and even if the photo is not about the computer, it doesn't focus, like, I tried to take a photo of a box in front of me, I was like 15cm away and i can't read anything written in the box.
Can someone help me? Where are the official stock roms? Because it seems to be a fake stock rom...
I agree something is wrong with the camera after this latest update my camera also didnt focus iam on reteu version . I have gone to lineage 14.1 and the camera is ok again.
Same here also
sam00561 said:
I agree something is wrong with the camera after this latest update my camera also didnt focus iam on reteu version . I have gone to lineage 14.1 and the camera is ok again.
Click to expand...
Click to collapse
Maybe next release(i guess 7.1.2) will fix it?
Yes.. I can confirm it.. It`s in dec patch.
So I`m flash nov patch ))))
St.Noigel said:
Yes.. I can confirm it.. It`s in dec patch.
So I`m flash nov patch ))))
Click to expand...
Click to collapse
Thanks for sharing the specific update with this error!
St.Noigel said:
Yes.. I can confirm it.. It`s in dec patch.
So I`m flash nov patch ))))
Click to expand...
Click to collapse
Can you do that without risk of bricking now or with the next update?
Could you post a link for Nov patch so people can fix the problem as well?
Sent from my XT1635-02 using Tapatalk
Zeljko1234 said:
Can you do that without risk of bricking now or with the next update?
Could you post a link for Nov patch so people can fix the problem as well?
Sent from my XT1635-02 using Tapatalk
Click to expand...
Click to collapse
If you have unlocked BL it`s not a problem for you to flash nov patch.
The better way - flash this with TWRP.
Original thread of this ROM here but only with link to dec patch
P.S. Don`t use OTA with this ROM
St.Noigel said:
If you have unlocked BL it`s not a problem for you to flash nov patch.
The better way - flash this with TWRP.
Original thread of this ROM here but only with link to dec patch
P.S. Don`t use OTA with this ROM
Click to expand...
Click to collapse
I don't want to unlock BL for now (and first time since I have Android). Thx for the info about broken security update, reason to skip this one. Let's see how 8.0 will work. Moto mentioned camera, whatever that means.
Zeljko1234 said:
I don't want to unlock BL for now (and first time since I have Android). Thx for the info about broken security update, reason to skip this one. Let's see how 8.0 will work. Moto mentioned camera, whatever that means.
Click to expand...
Click to collapse
At first they broke it... But - in next OTA they`ll fix it ))... But can broke something else - as usual )))))
Zeljko1234 said:
I don't want to unlock BL for now (and first time since I have Android). Thx for the info about broken security update, reason to skip this one. Let's see how 8.0 will work. Moto mentioned camera, whatever that means.
Click to expand...
Click to collapse
You are not wrong about being afraid of unlocking BL, but my advice is to do so, since it sets you free to customize your stock rom, install custom recoveries/roms, debloat(but moto isn't that bloated) and many other very nice things. It's not a difficult thing to do, and is very useful.
If you're afraid, ok, but think about doing it in some months maybe!?
Good lucky dude!
xdaVTU said:
You are not wrong about being afraid of unlocking BL, but my advice is to do so, since it sets you free to customize your stock rom, install custom recoveries/roms, debloat(but moto isn't that bloated) and many other very nice things. It's not a difficult thing to do, and is very useful.
If you're afraid, ok, but think about doing it in some months maybe!?
Good lucky dude!
Click to expand...
Click to collapse
I'm not afraid, lol. I did that many times (even using exploit on Verizon Moto). Just not finding good reason to do so. Against unlocking bl is that my bank app will stop to work, then I have to use magisk... Quite a headache when stock works just fine. I'm even thinking to not accept any further update, including 8.0.
Zeljko1234 said:
I'm not afraid, lol. I did that many times (even using exploit on Verizon Moto). Just not finding good reason to do so. Against unlocking bl is that my bank app will stop to work, then I have to use magisk... Quite a headache when stock works just fine. I'm even thinking to not accept any further update, including 8.0.
Click to expand...
Click to collapse
Zeljko1234 said:
(and first time since I have Android)
Click to expand...
Click to collapse
Lol, for this i thought it was your first time hahahaha
I don't think unlocking is a problem for bank apps since we've got magisk hahaha, it's a very good root app, why not?
I told, no good reason to do it. Another one, I don't really have time to play with Android as I used to.
I have to fix gapps on damn Fire tablet and postponing that as well.
Sent from my XT1635-02 using Tapatalk
I have found that this varries by camera app - some are better at it than others. True for any 8.x at this point.
Just to let you know, camera focuses fine on 8.0. Even faster than before!
Zeljko1234 said:
Just to let you know, camera focuses fine on 8.0. Even faster than before! [/QUOTE
You seem soaked!! Question from the lesser mortals - do we finally have 64 bit?
Click to expand...
Click to collapse
vivebatu said:
Zeljko1234 said:
Just to let you know, camera focuses fine on 8.0. Even faster than before! [/QUOTE
You seem soaked!! Question from the lesser mortals - do we finally have 64 bit?
Click to expand...
Click to collapse
Alberto's AOSP 8.1 IS 64bit.
Click to expand...
Click to collapse
vivebatu said:
Zeljko1234 said:
Just to let you know, camera focuses fine on 8.0. Even faster than before! [/QUOTE
You seem soaked!! Question from the lesser mortals - do we finally have 64 bit?
Click to expand...
Click to collapse
On Intel page I've found command line:
Code:
addison:/ $ cat /proc/cpuinfo | grep arc
CPU architecture: 7
CPU architecture: 7
CPU architecture: 7
CPU architecture: 7
CPU architecture: 7
CPU architecture: 7
CPU architecture: 7
CPU architecture: 7
addison:/ $ getprop ro.product.cpu.abi
armeabi-v7a
addison:/ $ getprop
...
[ro.product.cpu.abilist]: [armeabi-v7a,armeabi]
[ro.product.cpu.abilist32]: [armeabi-v7a,armeabi]
[ro.product.cpu.abilist64]: []
...
Missing value in the last line probably means no 64bit support.
Just googling how to check that and so far only way is to install Antutu and I don't want to do that during the testing period.
If you find another way, let me know.
Click to expand...
Click to collapse
Zeljko1234 said:
vivebatu said:
Missing value in the last line probably means no 64bit support.
Just googling how to check that and so far only way is to install Antutu and I don't want to do that during the testing period.
If you find another way, let me know.
Click to expand...
Click to collapse
Yep, armeabi-v7a means that it's not 64 bit. No surprise though, updating android from 32 to 64 could bring a lot of problems with app compatibility.
Click to expand...
Click to collapse
4/23/2018 Update:
Seems Big Red made a big snafu in their announcement on their update page about the latest OTA being an Oreo update. Whoops!
http://www.androidguys.com/2018/04/2...alaxy-s7-oreo/
Also, they have fixed their software update page and removed all references to Oreo from the latest OTA:
https://www.verizonwireless.com/support/samsung-galaxy-s7-update/
It looks like we'll be seeing it before the end of May possibly:
https://androidcommunity.com/samsun...0-oreo-update-coming-in-a-few-weeks-20180424/
=========================================
Per Android Community, the finishing touches are being done on Oreo for the S7 family which includes those of us on Verizon's version of the phone as well as unlocked phones.
No firm date has been set yet, but it could be any day now.
https://androidcommunity.com/samsung-galaxy-s7-s7-edge-to-receive-android-8-0-oreo-update-20180418/
Per SamMobile, the US variants have been certified with Oreo.
https://www.sammobile.com/news/galaxy-s7-oreo-update-inches-closer
For many, this may not be a big deal, especially if you root and flash. But for those of us that have no need to root and flash custom ROMs, this is big news. But sadly, it probably also marks the last official upgrade for the S7s. We'll probably get one more year of security updates and then we're on our own at that point.
FYI: https://www.verizonwireless.com/support/samsung-galaxy-s7-update,
the update hasn't been release just yet
invmini said:
FYI: https://www.verizonwireless.com/support/samsung-galaxy-s7-update,
the update hasn't been release just yet
Click to expand...
Click to collapse
Just got the update for BRC3 on my S7 but still no Oreo What gives? Link you provided says Oreo comes with this update
djh816 said:
Just got the update for BRC3 on my S7 but still no Oreo What gives? Link you provided says Oreo comes with this update
Click to expand...
Click to collapse
Yes, there has been some misunderstanding at Verizon. The changelog for the BRC3 says Oreo and lists all the features but it's actually still Nougat OS. Can you share the screenshot from your device of the software info screen showing the Android OS and build no. both?
itskapil said:
Yes, there has been some misunderstanding at Verizon. The changelog for the BRC3 says Oreo and lists all the features but it's actually still Nougat OS. Can you share the screenshot from your device of the software info screen showing the Android OS and build no. both?
Click to expand...
Click to collapse
Attached
did they push the wrong update? or publish the wrong change log?
i think it was a fix for the update we had earlier this month , it was sucking my battery.
quantum tao said:
did they push the wrong update? or publish the wrong change log?
i think it was a fix for the update we had earlier this month , it was sucking my battery.
Click to expand...
Click to collapse
I definitely had an update applied in last two days at least that is BRC3 so looks like wrong changelog. Verizon support is clueless but is forwarding it to their IT team supposedly..
Edit: Also they mention April 1st security patch in Oreo/BRC3 changelog, I do have that as well but I think those can be pushed without OS update. None of the Oreo features are anywhere to be found though and still 7.0 according to about this phone.
or maybe its a multi-stage update.
an update to prepare for the update.
Just checked system update
Just checked system update and received this notice
4GivenByChrist said:
Just checked system update and received this notice
Click to expand...
Click to collapse
I update to oreo ,but can not connect network ,because I use in HongKonng can you help me to solve this problem
hcn427 said:
I update to oreo ,but can not connect network ,because I use in HongKonng can you help me to solve this problem
Click to expand...
Click to collapse
If you're not on Verizon's network, you own't receive the update. You'll have to wait for someone to upload the Verizon image and then ODIN it.
hcn427 said:
I update to oreo ,but can not connect network ,because I use in HongKonng can you help me to solve this problem
Click to expand...
Click to collapse
If you're not on Verizon's network, you won't receive the update. You'll have to wait for someone to upload the Verizon image and then ODIN it.
iBolski said:
If you're not on Verizon's network, you won't receive the update. You'll have to wait for someone to upload the Verizon image and then ODIN it.
Click to expand...
Click to collapse
By being on Verizon's network..does a Straight Talk on Verizon's network count?
iBolski said:
If you're not on Verizon's network, you own't receive the update. You'll have to wait for someone to upload the Verizon image and then ODIN it.
Click to expand...
Click to collapse
THANK YOU SO MUCH。。。BUT I WANT TO ROOT AND RECOVERY Can you help me
hcn427 said:
THANK YOU SO MUCH。。。BUT I WANT TO ROOT AND RECOVERY Can you help me
Click to expand...
Click to collapse
No root yet for oreo.
Hemidrosis said:
No root yet for oreo.
Click to expand...
Click to collapse
Thank you very much
---------- Post added at 11:57 AM ---------- Previous post was at 11:56 AM ----------
Hemidrosis said:
No root yet for oreo.
Click to expand...
Click to collapse
Thank you very much!
Just got the December security patch in retin, does anyone also got the December security patch update???
riyan65 said:
Just got the December security patch in retin, does anyone also got the December security patch update???
Click to expand...
Click to collapse
retbr too - https://i.imgur.com/EdD8T09.jpg
Someone, please share.
Retbr here too. Received yesterday.
Guys who got the update please give the update to Nzpred he will make the twrp flashable file for all
Arrived 10 minutes ago on reteu.
Germany - reteu
Has anyone managed to capture the OTA OPPS28.85-16-4. Please share with the community. Thanks much!
This morning, December 2018 OTA update notification came on my phone (Slovakia, reteu, XT1676 DualSIM). I'll capture it and upload it to the GDrive as soon as I get home from school.
Running OPPS28.85-13-2, got OPPS28.85-13-4 update.
Andrej_SK said:
This morning, December 2018 OTA update notification came on my phone (Slovakia, reteu, XT1676 DualSIM). I'll capture it and upload it to the GDrive as soon as I get home from school.
Build number: OPPS28.85-13-4
Click to expand...
Click to collapse
you modified 2 with 4?
I found these 3 updates on this link https://mirrors.lolinet.com/ar/downloads/
Here they mention that both OPPS28-85-13-4 and OPPS28-85-16-4 correspond to the builds with the December security patch, but the build marked which is OPQS28-85-13-4 to which corresponds?
This link only contains installable firmware through fastboot, here another link from previous builds https://mirrors.lolinet.com/firmware/moto/cedric/official/
Still nothing here in Poland. (RETEU)
k3lcior said:
Still nothing here in Poland. (RETEU)
Click to expand...
Click to collapse
Got the update today on 2 devices - Moto G5 3Gb Ram (reteu) bought from retail.
PsyClip-R said:
Got the update today on 2 devices - Moto G5 3Gb Ram (reteu) bought from retail.
Click to expand...
Click to collapse
Yeah actually i just got it aswell. :good:
woozie.2007 said:
you modified 2 with 4?
Click to expand...
Click to collapse
I don't understand your question. Could you explain it better, please?
the last number must be 2, from actual version, 4 will be after apply the update
woozie.2007 said:
the last number must be 2, from actual version, 4 will be after apply the update
Click to expand...
Click to collapse
I've meant a build number of the update, but u r right - it's a bit confusing. I'll edit it.
anybody captured xxx-16-4 OTA?
Got updates here in Poland for 13-2 to 13-4, but not 16-2.
rafaelbarreto22 said:
I found these 3 updates on this link https://mirrors.lolinet.com/ar/downloads/
Here they mention that both OPPS28-85-13-4 and OPPS28-85-16-4 correspond to the builds with the December security patch, but the build marked which is OPQS28-85-13-4 to which corresponds?
This link only contains installable firmware through fastboot, here another link from previous builds https://mirrors.lolinet.com/firmware/moto/cedric/official/
Click to expand...
Click to collapse
Thanks for the warning.
See Post #2 for the Link to Odin Files
It doesn't appear that Firmware.Science is updating their site any longer. I'm removing the link since it's useless to us now. I'll continue to try and get the Odin files as they drop and add them to post #2 for everyone
Understanding the Firmware labels
Here's a better understanding of how these are broken down
G=Galaxy S series
975U or F etc, the model of device
SQ, FX etc = CPU and model specific
U,S,E = Update, Security, Engineering, respectively
1,2,3,4,5 etc = bootloader rev(this is important!)
A = Pie rev 1(This starts off with "A" as the build that is the initially shipped on the device. S10 series is Pie)
(If you ever see a build that contains a "Z" such as this: U5ZSBA, that means the build is part of Samsung's Official Beta program. The "Z" in this context replaces the Android Version letter which hides what OS it actually is.)
R,S,T = Year (R is 2018, S is 2019, T will be 2020)
A,B,C etc = month (January A - December L).
1 - 9 and then A - Z =build compilation. This basically means how many builds there are in a month. They start at 1 and go to Z.
So G975USQU1ASBA would be
G975-U-SQ-U-1-A-S-B-A
G975U (Galaxy S10+ Carrier version), SQ (Snapdragon), U (Update), 1 (Bootloader version), A (Build Pie), S (2019), B (February), A (Build)
**You CANNOT downgrade to a lower Bootloader. So if you are on a Bootloader 2 rom, you can not go to a Bootloader 1 rom.
Current AT&T Stock - DTF6 July 1, 2020 Security Patch
Stock Odin Files
G975USQS4DTF6 LINK July Security Patch ATT/TMB/SPR
G975USQU3DTF1 LINK USC June 1
G975USQS3DTD5 LINK TMB June 1
G975USQU3DTE8 LINK ATT and SPR June1
G975USQS2BSIV LINK
G975USQS2ASGB LINK
G975USQU2ASG8 LINK
G975USQU1ASD9 LINK
G975USQU1ASD3 LINK
G975USQU1ASBA LINK
Use this version of Odin when flashing the above files
Odin3_v3.13.3b: HERE
I think it can also help to go into recovery and do a couple factory resets before flashing a Firmware.
Might need this one too, you never know
How come when I check for an update it's says I'm up to date but I have build ASAT?
acidburn76 said:
How come when I check for an update it's says I'm up to date but I have build ASAT?
Click to expand...
Click to collapse
I used the firmware science website to update my 975U1 to 975U1UEU1ASBA how long should it take on the starting Android screen? I dirty flashed may have to reset then flash...
acidburn76 said:
How come when I check for an update it's says I'm up to date but I have build ASAT?
Click to expand...
Click to collapse
They can roll them out in waves. You can try to clear cache and data in the Software Update app
charrog said:
I used the firmware science website to update my 975U1 to 975U1UEU1ASBA how long should it take on the starting Android screen? I dirty flashed may have to reset then flash...
Click to expand...
Click to collapse
It should typically not take TOO long. I would recommend a reset if you're having issues
kangi26 said:
It should typically not take TOO long. I would recommend a reset if you're having issues
Click to expand...
Click to collapse
Ok that worked now have ASBA does that mean when AT&T push updates my phone will get them?
Thanks.
kangi26 said:
Might need this one too, you never know
Click to expand...
Click to collapse
Jus t got OTA Version: ASBA
I do not know what changed..... I can't find the changelog. I'm with AT&T still on Feb, 1st Security patch as well.. Anybody know what has changed????
charrog said:
Ok that worked now have ASBA does that mean when AT&T push updates my phone will get them?
Thanks.
Click to expand...
Click to collapse
Not if you've flashed G975U1UEU1ASBA, that is a Unlocked Firmware. G975USQU1ASBA is the Carrier version and you would get OTA (AT&T/Spr/T-Mo/AZW)
iteam said:
Jus t got OTA Version: ASBA
I do not know what changed..... I can't find the changelog. I'm with AT&T still on Feb, 1st Security patch as well.. Anybody know what has changed????
Click to expand...
Click to collapse
I had read that, aside from the basic security patch, they made some improvements to the fingerprint scanner (and I'll have to go look for what else, I dont remember right now)
kangi26 said:
I had read that, aside from the basic security patch, they made some improvements to the fingerprint scanner (and I'll have to go look for what else, I dont remember right now)
Click to expand...
Click to collapse
Hmmm My feb 1st security patch was the same before and after the OTA....
thanks
---------- Post added at 02:25 PM ---------- Previous post was at 01:35 PM ----------
kangi26 said:
Not if you've flashed G975U1UEU1ASBA, that is a Unlocked Firmware. G975USQU1ASBA is the Carrier version and you would get OTA (AT&T/Spr/T-Mo/AZW)
Click to expand...
Click to collapse
With my unlocked phone will there be any issues if I download and flash the G975USQU1ASBA version?
Thanks
They made some tweaks to the camera to improve quality too.
ARGGG! Thought I might have included the front camera ring notifications simpler than the APK on the Play store.
LINK:
https://play.google.com/store/apps/details?id=com.used.aoe
charrog said:
thanks
---------- Post added at 02:25 PM ---------- Previous post was at 01:35 PM ----------
With my unlocked phone will there be any issues if I download and flash the G975USQU1ASBA version?
Thanks
Click to expand...
Click to collapse
If you've got an AT&T SIM, then there should be no issues at all. You will get the AT&T bloat, but you can disable it and you will also get the "features" like Wi-Fi calling...
kangi26 said:
If you've got an AT&T SIM, then there should be no issues at all. You will get the AT&T bloat, but you can disable it and you will also get the "features" like Wi-Fi calling...
Click to expand...
Click to collapse
Thanks I can deal with the bloat, quick question later if I decide to go back to another firmware will that be an issue?
Thanks
charrog said:
Thanks I can deal with the bloat, quick question later if I decide to go back to another firmware will that be an issue?
Thanks
Click to expand...
Click to collapse
It shouldn't be an issue (aside from having to set up again)
kangi26 said:
It shouldn't be an issue (aside from having to set up again)
Click to expand...
Click to collapse
Thanks again
My build is still showing asat and up to date. Cleared data and cache. Oh well guess I'll have to wait.