Develop Bugs

[Soundmod] How to install SwanSong (Viper4Arise) on Moto G4 Plus

Please read this post in detail to know all the details about viper4arise and the great team behind A.R.I.S.E
Sound Systems™ (Auditory Research in Sound Enhancement™ ).
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
I have installed SwanSong and the sound is amazing. SwanSong have an aroma interface during the installation in TWRP and it will be easy for you to install it with all the guides inside the installer. Here are the steps I have done to install it (Thanks to @tywinlannister).
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. (This is important, but you can do it during the installation of SwanSong).
3. Download Arise Sound Systems zip from the link https://www.androidfilehost.com/?w=files&flid=151719
(Click Aroma & look for ARISE+Deuteronomy+X.XX+Modular+AROMA+Installer.zip )
4. Reboot to TWRP and flash the downloaded file. Aroma will start and guide you through the installation process. (There will be many number of modules which will make you confused as to whether it is needed or not. Refer the below recommended setup to get the best experience).
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
This is the recommended setup from the developer itself while flashing SwanSong in Aroma. (Thanks to guitardedhero).
I would recommend Core (mandatory, if not already installed), ViPER4Arise™ 2.5.0.5, Profiles, Arkamys™, ICEsound™, Skip Config and Preset, MusicFX (unless you know it's already installed, this script will leave an existing MusicFX installation intact and end, just in case), permissive (do not, if Enforcing Mode is preferred), Repair SD Card Permissions (allow up to 3-5 minutes of additional time for this script).
Don't flash deep buffer unless you absolutely need to. It's a last resort to get streaming apps to process and should never be flashed as part of your normal installation unless it's been found from flashing previous ARISE version that it's necessary on your device.
Once booted:
Android Settings > Apps > Menu > Show System > Arkamys > Enable Phone Permissions
Android Settings > Apps > Menu > Show System > ViPER4Arise > Enable Storage Permissions
Open ViPER4Arise™ and select Audiophile™ X profile from the Load Effect Profile option in Menu.
On displayed output tab:
Master Power > Off
Master Power > On
Menu > Device Status
Should show Enabled, Normal, and Processing: Yes (at least during audio playback for some scenarios)
If you want to select ViPER4Arise™ through a media player's Equalizer option (not necessary, recommended for users that prefer to get to ViPER4Arise™ through a media player rather than launch the app from Recents or App Drawer):
Android Settings > Apps > Menu > Show System > MusicFX > Disable
Reboot for good measure.
Hope it will help for you. If anything bad happens or you want to uninstall viper, just dirty flash your rom (only wipe cache and dalvik) and everything will be good.
Please note that the selinux mode shall be set to permissive for viper4arise to work. If the selinux mode will not stick to permissive, you may need to disable inbuilt root (if there) and flash latest supersu and then everything will be fine.
There will be a lot of modules during the aroma installation which you can skip (Toolkit, Dolby Plus, Dolby Atmos etc) if it is not mentioned in the recommended setup. Its your choice. Enjoy a crystal clear sound from the great developers.
:good:
NB: I hope I have covered everything that needs to know. Sorry for my bad english and errors if any. I was always a fan of viper4android and been using it for last 3 years and viper always made the music much better to my ears. My only intention is to help others who may be confused with all those modules which will come during the installation of this massive all-in-one package.

Hey! First of all, thank you very much for this great guide. I've followed your instructions, but it seems like I'm experiencing some kind of lag when changing songs. It's like the effects needs to catch up for 1 or 2 seconds after changing songs.. I have done everything mentioned in the guide, and I'm using Spotify, by the way. Any help is appreciated

Lankern98 said:
Hey! First of all, thank you very much for this great guide. I've followed your instructions, but it seems like I'm experiencing some kind of lag when changing songs. It's like the effects needs to catch up for 1 or 2 seconds after changing songs.. I have done everything mentioned in the guide, and I'm using Spotify, by the way. Any help is appreciated
Click to expand...
Click to collapse
I think that your problem with lag is caused by an ondemand-governor or a governor, which set the mhz of cores too low for battery-saving features or whatever.
Which rom are you on. Are you using any battery saving tweaks (for viper with super audio quality driver, i think, need 2 cores on with 600mhz the minimum for non-stuttering sound-processing).
Either setting the governor to interactive or manually adjusting the lower CPU speeds may solve your problem.

Perfect!
My long wait to have an audio mod on stock N ends here.. Thanks for the wonderful share.

krossifix said:
Perfect!
My long wait to have an audio mod on stock N ends here.. Thanks for the wonderful share.
Click to expand...
Click to collapse
Always happy to help :good:

Nothing came....Already installed viper4android does it affect this package??

naveen135 said:
Nothing came....Already installed viper4android does it affect this package??
Click to expand...
Click to collapse
This is the latest version of viper4android. If any other sound mod is installed (including old viper), it should be removed by dirty flashing your rom and then proceed with this.

nazim7 said:
I think that your problem with lag is caused by an ondemand-governor or a governor, which set the mhz of cores too low for battery-saving features or whatever.
Which rom are you on. Are you using any battery saving tweaks (for viper with super audio quality driver, i think, need 2 cores on with 600mhz the minimum for non-stuttering sound-processing).
Either setting the governor to interactive or manually adjusting the lower CPU speeds may solve your problem.
Click to expand...
Click to collapse
Hey again!
I'm running RR 5.8.2 [09/03 update], and no, I'm not using any type of battery-saving tweaks. With Viper4Arise disabled, I still experience the lag. Check the screenshots for the governor setting i set inside the EX Kernel Manager app. Any ideas on how to further troubleshoot/fix this?

Lankern98 said:
Hey again!
I'm running RR 5.8.2 [09/03 update], and no, I'm not using any type of battery-saving tweaks. With Viper4Arise disabled, I still experience the lag. Check the screenshots for the governor setting i set inside the EX Kernel Manager app. Any ideas on how to further troubleshoot/fix this?
Click to expand...
Click to collapse
Thanks for the screenshots. I have used viper in stock nougat and lineage oms, I haven't faced any kind of lags in these. Maybe it is specific to RR rom.
Or you can check with the viper installation; start fresh and install only core and viper4 arise(skip all other modules) and check if there is any lags. If there is still lag, you will have to switch the rom. If there is no lag, try installing the modules one by one until you find which module is causing the lag and avoid using it.

nazim7 said:
Thanks for the screenshots. I have used viper in stock nougat and lineage oms, I haven't faced any kind of lags in these. Maybe it is specific to RR rom.
Or you can check with the viper installation; start fresh and install only core and viper4 arise(skip all other modules) and check if there is any lags. If there is still lag, you will have to switch the rom. If there is no lag, try installing the modules one by one until you find which module is causing the lag and avoid using it.
Click to expand...
Click to collapse
Okay, so I've done some troubleshooting for the past 30 minutes.. It seems like it is the ICEsound™ that is causing the lag for some reason. Everything else seems to work, and thank you again for your help!

Doesnt work while using play music. Works with YouTube, though.
Noticed the "Processing" is set to No while on play music and to Yes while on YouTube. Help?

radichification said:
Doesnt work while using play music. Works with YouTube, though.
Noticed the "Processing" is set to No while on play music and to Yes while on YouTube. Help?
Click to expand...
Click to collapse
Which rom you are on. Try disabling the audiofx or music fx in apps(check show system apps in options ) and reboot. It will work then.

nazim7 said:
Which rom you are on. Try disabling the audiofx or music fx in apps(check show system apps in options ) and reboot. It will work then.
Click to expand...
Click to collapse
I'm on Lineage OMS. Already disabled both and rebooted. Still Processing: No

radichification said:
I'm on Lineage OMS. Already disabled both and rebooted. Still Processing: No
Click to expand...
Click to collapse
Do you have busybox installed, give root permissions "always" , selinux mode set to permissive. I was on lineage OMS before and viper was working, but I didn't tried google play music. Can you try in any other player and reply back.

nazim7 said:
Do you have busybox installed, give root permissions "always" , selinux mode set to permissive. I was on lineage OMS before and viper was working, but I didn't tried google play music. Can you try in any other player and reply back.
Click to expand...
Click to collapse
Yes I followed your guide step by step. So unfortunate

radichification said:
Yes I followed your guide step by step. So unfortunate
Click to expand...
Click to collapse
Sometimes, Viper stops processing after plugging in earbuds, but it will start processing after a reboot with the earbuds plugged in. Check if this is what happening to you. If still not processing, try to freeze icesound service in system apps. It can also mess up with some roms. There is a minor glitch somewhere, hopefully we will find it.

Thanks Nazim7 for this awesome guide!!
Viper screams on my phone and audio quality is improved drastically....u can feel the thump and bass!!!
Some people reported that processing was : no...I faced the same issue...What I did was plugged in earphones -- restarted phone --- make sure selinux set to permissive before restarting...
Go to viper4arise settimgs and set fx to compatible...then play song ..

nazim7 said:
This is the latest version of viper4android. If any other sound mod is installed (including old viper), it should be removed by dirty flashing your rom and then proceed with this.
Click to expand...
Click to collapse
Thanks!!!!It worked

naveen135 said:
Thanks!!!!It worked
Click to expand...
Click to collapse
Glad to know that it worked for you. Enjoy..

help
i'm on stock rom and elemental x kernel, unable to install busybox and after installing viper, in driver status everything says 'no'. Please help.

Tutorial Viper4AndroidFX on AEX ROM

Hi,if u like V4A audio efect.ill share how u can use V4A in AEX rom.
First,u must rooted and install busybox.
-Ok if u done upper step,lets boot your zuk z2 into twrp
flash v4a4.2.zip(V4A 4.2) and reboot system.
-Now launch V4A,install driver and reboot
Ok,now its time to update latest V4A version 2.5.0.5
-Install RootExplorer (optional) or u can use twrp file manager to delete V4A 4.2 apk in system.
-Flash V4A 2.5 in twrp and u done.
Optional you can delete apk in system or disable MusicFx.

thank you, but i didn't find or couldn't do the delete part with root explorer or twrp, but it worked anyhow.

raketman said:
thank you, but i didn't find or couldn't do the delete part with root explorer or twrp, but it worked anyhow.
Click to expand...
Click to collapse
If you using root explorer try find viper4android 4.2 folder in root/system/priv-app.

Thank you for your information. I have got much easier way to use it(if you have magisk installed). First install the viper4android zip using twrp. Reboot. Then open mgix go to download and select viper4android. Just tap on the arrow and tap on install. After installing it will ask your permission to reboot. Just reboot your device and enjoy. Sounds tricky but process is as simple as water.

I flashed ARISE and it worked normally. But as for sound quality...meh

n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
I don't think sound quality would still be lacking after you installed ARISE. Do share your setup (pm me, this isn't the correct thread) so we could get to the bottom of your issue.
Sorry for OT!

n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
Im just done with arise before..still nid v4a 2.5.0.4 driver. U have seen driver 2.5.0.5?nope,there only 2.5.0.4 driver.v4arise is modded apk and not original one.

arch_geek said:
I don't think sound quality would still be lacking after you installed ARISE. Do share your setup (pm me, this isn't the correct thread) so we could get to the bottom of your issue.
Sorry for OT!
Click to expand...
Click to collapse
zakwanPHG said:
Im just done with arise before..still nid v4a 2.5.0.4 driver. U have seen driver 2.5.0.5?nope,there only 2.5.0.4 driver.v4arise is modded apk and not original one.
Click to expand...
Click to collapse
If the hardware is ****e any kind of software is not going to make it good. It's not magic.

does it work on aex 5.1 ,( the january update)?

Haha, very timely post. I was trying to get Viper for the first time on Oreo two days ago.
One question, are apps other than music players processed by Viper as well? I ask because I installed Arise but emulators and games didn't get audio processing, only my music players.
Thanks!

I'm getting driver install failed error I/o while setting up v4a on Validus 8.1

I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?

Hey I was wondering if viper is working on Oreo or not.

Ronnie2017 said:
I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?
Click to expand...
Click to collapse
Same on AEX v5.1

Ronnie2017 said:
I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?
Click to expand...
Click to collapse
I'm having same error
I'm on bootleggers ROM March build 8.1 Oreo
Pls help
I finally installed it via magisk
And it's working
Pls suggest some settings to get max phone speaker volume

Stuck on booting
n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
After flashing arise+magnum opus phone stuck in booting.it takes half an hour & nothing happen..
help me

Installing V4A or other audio mods

Hello everybody. I have Magisk and couldn't install Viper module, neither the usual viper .zip via TWRP.
Have you been able to install any of the available audio mods on your Z2 Play?

I too am interested.
I prefer the Atmos version, ViPERAtmos 4.8 Sony Beats Universal Edition, but I don't think it's compatible with Nougat.
Any advice would be greatly appreciated!

I installed ARiSE sound system in my z2 play, which contains Viper and Dolby Atmos

I have a module called viper 4arise installed and its working very well

danielmn97 said:
I installed ARiSE sound system in my z2 play, which contains Viper and Dolby Atmos
Click to expand...
Click to collapse
Could you post a link to the download / thread that worked for you? I can try to install and make a simple tutorial for other folks.
Thanks!

Here https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 install the last stable version

Thanks! I've looked at ARISE a few times, but it seems life meant steps to install. I guess I'm going to have to bear it.
Does it sound as good at Atmos?

I manage to install it. It's overall pretty simple. You can extract the installation .prop file to /emulated/0 and edit it there to get a 1 cycle install. Otherwise your first try will do just that and return an error (so you'll have to edit the file anyways).
I tried all versions of viper there but none worked (all showed abnormal status) also, remember to mark for installation the Magisk compatibility.
I'm using Atmos, working very nicely, but still wish Viper had worked...

dainezi said:
I manage to install it. It's overall pretty simple. You can extract the installation .prop file to /emulated/0 and edit it there to get a 1 cycle install. Otherwise your first try will do just that and return an error (so you'll have to edit the file anyways).
I tried all versions of viper there but none worked (all showed abnormal status) also, remember to mark for installation the Magisk compatibility.
I'm using Atmos, working very nicely, but still wish Viper had worked...
Click to expand...
Click to collapse
That's weird, I have Viper and atmos working in my device. Previously I set SElinux permissive and installed Busybox

Oh that must be it. I have it on enforcing. Will test with permissive then. Thanks!

Well, it worked! AriSE with SELinux mode changer set to permissive.
Thanks a lot!
With Dolby and viper our speakers sound WAY better! Headphones are even more awesome!

Sound Mod | Viper4Android | Magisk 16 |Oreo | 25.04.2018

Hi guys,
I just tested several Sound Mods for Android. So I want to share my best settings for the HTC U11 + U sonic Earphones with you.
Working on:
Stock based ROM (8.0 based)
LOS based ROM (8.1 based)
Install Viper4Android via MagiskManager (Get it from here or directly under Downloads in Magisk, I am using Viper4Android 2.6.0.4 with the new Material Design)
Reboot
Install the AINUR Audio Mod (Get it from here or install it directly through Magisk Manager -> Downloads -> Ainur Sauron.)
Reboot
Install AML(Audio Modification Library) via Magisk or flash it from here
Reboot
Open Viper4Android. Driver Status should be working now. If not dirty Flash your ROM and start again at 1.
Load my HTC U11 Profile that I attached to this post. When using Viper4Android FX greater or equal to version 1.6 than use the v2 Profile. Everything lower than Viper4Android FX 1.6 just use the v1 Profile. Unzip the attached File to the Viper4Android Folder at the Internal Storage of your Device. Dont forget to load the Profile in V4A.
Hope you are enjoing this as much as I do. If you got any recommendations or suggestions let me know.

for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works

Zimty86 said:
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Click to expand...
Click to collapse
Great that yours also working .

Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.

xx00xx1990 said:
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
Click to expand...
Click to collapse
Did you already installed another soundmod? This happened to me after I flashed ARISE. Only a full wipe helped me out. I am also using Leedroid R124.

I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.

xx00xx1990 said:
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
Click to expand...
Click to collapse
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.

Malle355 said:
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Click to expand...
Click to collapse
I saw in Leedroid thread that you have to change a line in arise_parameters1.prop , to avoid bootloops

After flashed as your instructions, everything works like a charm bur only ANC not work anymore

I finally got it to work, but sound quality is not as good as on Dolby Atmos Nougat, I think I will stick to V4A + usb dongle boost mod till dolby is updated

Will just the viper4Android work and give good sound quality
Sent from my 2PZC5 using XDA Free mobile app

Actual Dolby can't work while V4A works, at least with me, I have to disable one of them so the other work, but anyway actual dolby on oreo is not good as audio quality, it was way better on Nougat

I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.

schmeggy929 said:
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
Click to expand...
Click to collapse
I can use Ahrion's version, but it has to be the v1.5.2/2.5.0.5 version. I've never been able to get any 2.3.4.0 versions to work on Oreo, due to the driver not being able to install.

Anybody get Dolby to install? I'm getting Api error

Should we install Unity or standard version from the official thread?

vegetaleb said:
Should we install Unity or standard version from the official thread?
Click to expand...
Click to collapse
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great

bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
I must reckon the new Dolby port on Oreo is pretty good, I am using dynamic selection to boost both surround and bass. Always be sure to have Dolby surround mode On (green icon)

bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
How did u get Dolby to run? Mine opens up and close right away. I'm on ledroids rom.

Can anyone get the profile to work on updated viper on Magisk. I can see it in my profiles but can't get it to take

[Mod/Magisk] Dolby Atmos™ [A9-12 ][OOS A10 + A11 Custom](Updated 6-25-21) full brightness fixes

So recently @guitardedhero release and version of Dolby atmos for android Pie and i was excite about it but it only for for android pie only,so i try downgrade back to 9.0.17 but apparently the mod cause the phone go straight to crashdump mode and like hour ago he release couple more version but i was already on android 10 but after messing around with flash script i was able flash it on OOS10 imma attach the file i mod here for specific only for OOS10 only since this the only version that work flawless on OOS10 other test version i try they either force close the app or audio loss, highly recommended flash it along with Ainur Narsil---haven't test with other mod yet but in my opinion Dolby itself already better
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508​
UPDATE: latest dolby re-port by reiryuki fixes full brightness issue working on (maybe)all custom rom available now for Oneplus 6t and maybe other device has FOD custom rom ! please head to his github repo link below for the download!
Download
Credit:
@guitardedhero (for The Port)
-Me (for testing and mod the file to work on OOS10)
-Reiryuki for the fix and new port
-Dolby (for Dolby Atmos)

_BГ@ckθut said:
So recently @guitardedhero release and version of Dolby atmos for android Pie and i was excite about it but it only for for android pie only,so i try downgrade back to 9.0.17 but apparently the mod cause the phone go straight to crashdump mode and like hour ago he release couple more version but i was already on android 10 but after messing around with flash script i was able flash it on OOS10 imma attach the file i mod here for specific only for OOS10 only since this the only version that work flawless on OOS10 other test version i try they either force close the app or audio loss, highly recommended flash it along with Ainur Narsil---haven't test with other mod yet but in my opinion Dolby itself already better
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
Credit:
@guitardedhero (for The Port)
-Me (for testing and mod the file to work on OOS10)
-Dolby (for Dolby Atmos)
Click to expand...
Click to collapse
Can u help me why it would not open and crashing. I'm on iOS 10.3.0

tswb said:
Can u help me why it would not open and crashing. I'm on iOS 10.3.0
Click to expand...
Click to collapse
You had any sound mod install? And what magisk version you had?

I have install the Dolby atoms only and no audio mod. Latest magisk 20.3 and I try to set the storage it won't open the permission.how to get granted permission to the storage.

tswb said:
I have install the Dolby atoms only and no audio mod. Latest magisk 20.3 and I try to set the storage it won't open the permission.how to get granted permission to the storage.
Click to expand...
Click to collapse
Like dolby ask you to granted storage permission or magisk? Cause dolby not require to Grant any permission as far as i know!there is couple people has successful installed it without any issue so far

tswb said:
I have install the Dolby atoms only and no audio mod. Latest magisk 20.3 and I try to set the storage it won't open the permission.how to get granted permission to the storage.
Click to expand...
Click to collapse
Use Magisk 20.1 try it and test if works then update to Magisk 20.3 done

Mervingio said:
Use Magisk 20.1 try it and test if works then update to Magisk 20.3 done
Click to expand...
Click to collapse
OK I will try it. Thanks

it works this is the good news, the bad news is that my bluetooth then stops working, it can no longer be switched on

tswb said:
OK I will try it. Thanks
Click to expand...
Click to collapse
did you find a chance to try it ?
i wonder we loose modules or not after we downgrade to 20.1 ?
also dolby still works when we upgrade back to 20.3 ?

Can it work simultaneously with Dolby digital plus?
Also do I need to install anything (AML)?

lazye53 said:
Can it work simultaneously with Dolby digital plus?
Also do I need to install anything (AML)?
Click to expand...
Click to collapse
Give it a try! Haven't has time to test yet but i guess it should work!

the_poseidon said:
did you find a chance to try it ?
i wonder we loose modules or not after we downgrade to 20.1 ?
also dolby still works when we upgrade back to 20.3 ?
Click to expand...
Click to collapse
I got working on 20.1 but i notice the Bluetooth not working after I install the zip file.

tswb said:
I got working on 20.1 but i notice the Bluetooth not working after I install the zip file.
Click to expand...
Click to collapse
If you remove module Bluetooth is not longer working

Well guy there is a news testing zip... currently at work now but ill test it after work and let you guy know! I still using the same zip and don't has any problem with Bluetooth or anything but ill update the new zip here a little bit!

https://forum.xda-developers.com/an...-atmos-axon-7-oreo-port-t3740508/post81515331

I was reading through a lot of that thread and it looks like it's still based for pie and there was a section in there saying that you have to change your build prop setting to SDK level 28 if you are on oxygen 10 and Android 10 you'll be SDK 29 so I was getting force closes and I took a big risk when do the build prop edited my SDK level 228 and went straight into a bootloop. So I had to actually do a factory reset. I then restore from twrp, but I screwed up and restored everything what I should have just done a system and data restore only because then I did a soft brick and had to use the MSM tool and start all over again at Android 9! Lol.. so I know guitardedhero was making special media files for audio library they were . so extensions... I'm going to keep digging because on Android 10 I've got ice sound working which is an Asus driver and I can even change the four configurations as well as the 11 different sound profiles fall through terminal emulator. I also have a flashable DTS 2.0

groovemetal81 said:
I was reading through a lot of that thread and it looks like it's still based for pie and there was a section in there saying that you have to change your build prop setting to SDK level 28 if you are on oxygen 10 and Android 10 you'll be SDK 29 so I was getting force closes and I took a big risk when do the build prop edited my SDK level 228 and went straight into a bootloop. So I had to actually do a factory reset. I then restore from twrp, but I screwed up and restored everything what I should have just done a system and data restore only because then I did a soft brick and had to use the MSM tool and start all over again at Android 9! Lol.. so I know guitardedhero was making special media files for audio library they were . so extensions... I'm going to keep digging because on Android 10 I've got ice sound working which is an Asus driver and I can even change the four configurations as well as the 11 different sound profiles fall through terminal emulator. I also have a flashable DTS 2.0
Click to expand...
Click to collapse
Yeah that what im concerned about to change the builprop SDK to 28 instead of that i change a code on the zip so it bypass the SDK check to able it flash on SDK 29....it was a test but apparently i didn't has any problem about a Bluetooth or anything! And there is couple people successful flash it as well but imma caught up with lastest zip and lemme see if i could mod it to work on OOS 10!and yep by default it only support Android pie only! So imma try troubleshooting as much as possible before releasing it!

Updated to latest Dolby Atmos 0.727 zip and it attached on the first page... I'll leave 0.64 zip there just in case anyone need it! And once 727 zip it work without any problem on 10.3.0 for me at least (testing on AAC,LDAC even aptx HD) but let me know

groovemetal81 said:
I was reading through a lot of that thread and it looks like it's still based for pie and there was a section in there saying that you have to change your build prop setting to SDK level 28 if you are on oxygen 10 and Android 10 you'll be SDK 29 so I was getting force closes and I took a big risk when do the build prop edited my SDK level 228 and went straight into a bootloop. So I had to actually do a factory reset. I then restore from twrp, but I screwed up and restored everything what I should have just done a system and data restore only because then I did a soft brick and had to use the MSM tool and start all over again at Android 9! Lol.. so I know guitardedhero was making special media files for audio library they were . so extensions... I'm going to keep digging because on Android 10 I've got ice sound working which is an Asus driver and I can even change the four configurations as well as the 11 different sound profiles fall through terminal emulator. I also have a flashable DTS 2.0
Click to expand...
Click to collapse
I would like to personally apologise to you for posting information that caused much frustration and inconvenience for you.
That was irresponsible of me to state workarounds to circumvent a restriction I implemented without knowing the risks that could be involved and not just taking out the restriction myself.
Thank you for sharing your experience. If I had not seen it just now, I would have still assumed such an action you took to be harmless.
I did remove this restriction many versions ago after learning that many were having success on Android 10 and the latest zip a couple hours ago seems to provide a much higher success rating and the support for existing audio mods and their effects seems to now be in place if you ever get an itch to try again without needing to do any hacky, ill-advised stuff like what I said last week.
:good:

My Bluetooth stops working after flashing. Reflash of OOS was necessary to get it back.