Develop Bugs

[Q] viper x reboots when receiving calls

all the viperx version reboots while receiving calls! but sometimes it wont reboots....
i've changed it with other rom problem solved,but i love viperx more.... anyone know how to fix it?

Which one are you on now, the JB ? And if you are using the aosp lockscreen mod in the venom tweaks....turn it off and use the standard lockscreen. Might solve your issue

Also Make sure you have deleted the OTA update file from downloads folder.
Apparently recovery goes hyper if you dont (according to viperx thread )

A noobs solution
My One X rebooted on every incoming call, but it didn't do that from the start. So, I tried to backtrack any changes that I might have done to the setting and found that I had enabled “AOSP Lockscreen”.
After unchecking this setting everything was back to normal again.
Maybe this can be of some help to others...

webDing said:
My One X rebooted on every incoming call, but it didn't do that from the start. So, I tried to backtrack any changes that I might have done to the setting and found that I had enabled “AOSP Lockscreen”.
After unchecking this setting everything was back to normal again.
Maybe this can be of some help to others...
Click to expand...
Click to collapse
Yeah it was a problem in a (very old) previous version. Its fixed. That's why this thread is from January

Mr Hofs said:
Yeah it was a problem in a (very old) previous version. Its fixed. That's why this thread is from January
Click to expand...
Click to collapse
Wow, 3.7.0 (my version) is very old...well at least I didn't post a stupid question, just a stupid answer...

What are you saying ! Ow wow another sarcastic reply !? You have it on 3.7.0 ? Then just answer that you still have that problem. Did you install 3.7.0 with a full wipe ? Did you restore stuff from previous builts ?
I will advise you strongly to leave the sarcasm behind if it was ment that way in the first place. It won't get you far here. Then its better to give more info on your situation so we can come up with better solutions. I really hope this is a case of misunderstanding and bad communication.
Edit : I ticked the aosp lockscreen tweak and tested it, no random reboots on 3.7.0 what so ever.

Mr Hofs said:
What are you saying ! Ow wow another sarcastic reply !? You have it on 3.7.0 ? Then just answer that you still have that problem. Did you install 3.7.0 with a full wipe ? Did you restore stuff from previous builts ?
I will advise you strongly to leave the sarcasm behind if it was ment that way in the first place. It won't get you far here. Then its better to give more info on your situation so we can come up with better solutions. I really hope this is a case of misunderstanding and bad communication.
Edit : I ticked the aosp lockscreen tweak and tested it, no random reboots on 3.7.0 what so ever.
Click to expand...
Click to collapse
No, that was no sarcasm, I'm completely new to rooting phones and I thought progress was very quick and that my version had become obsolete very fast, or that I downloaded an old version.
I still have the problem, well not after disabling the setting...
I did a full wipe.
...but I flashed an old version, noticed my mistake, and then flashed 3.7.0.
The problem is that I know I did a full wipe before flashing the old version, but I'm not 100 per cent sure that I did it the second time. It sounds like missed it. So starting all over again would solve my problem? No short cuts?
Sorry about the misunderstanding!

Misunderstandings do happen in life mate, that's why i stated it as nicely i could
I think a full wipe and reinstall of 3.7.0 might solve it. I have a clean installed viper rom and tested now with several workcalls,no issue

Mr Hofs said:
Misunderstandings do happen in life mate, that's why i stated it as nicely i could
I think a full wipe and reinstall of 3.7.0 might solve it. I have a clean installed viper rom and tested now with several workcalls,no issue
Click to expand...
Click to collapse
Sorry, but it didn't solve the problem. I still get reboots when the lock screen is enabled. Even though I swiped and reinstalled.
FWIW

Hmm buggers, i can't really help you on this because i can't reproduce the reboots. Weird ! But at least thanks for testing

webDing said:
Sorry, but it didn't solve the problem. I still get reboots when the lock screen is enabled. Even though I swiped and reinstalled.
FWIW
Click to expand...
Click to collapse
I'm now pretty sure what the problem is.
It's a conflict between the "built-in" screen lock (like pin code or face recognition) and the Viper screen lock. At least on my phone it's impossible to run both (in my case Viper and pin code) simultaneously.
HTH

webDing said:
I'm now pretty sure what the problem is.
It's a conflict between the "built-in" screen lock (like pin code or face recognition) and the Viper screen lock. At least on my phone it's impossible to run both (in my case Viper and pin code) simultaneously.
HTH
Click to expand...
Click to collapse
I’ve been a Beta tester for a an American software company during a period of 7-8 years and I’ve written some simple plug-ins for their web design software. So, I tried to use that experience to do some testing and trying to minimize the number of factors that could trigger the problem.
What I did was a factory reset, a wipe and then I installed 3.7.0.
Before installing any apps, launchers and whatnot, I tried running the phone with both pin code and Viper screen lock enabled.
The result was the same every time.
I then tried to enabled the two settings in different orders, first pin code, then Viper and vice versa, but to no avail.
My conclusion, whatever it’s worth, is that it’s easy to get a problem when two pieces of code are trying to manage the same event. Maybe it’s possible to find the line/lines in the code that might trigger the conflict..?
…or maybe Viper just don’t like Sweden/Swedes?
Well, with a little (bad) luck maybe some other people run into this problem, but there might be very few of us who use Viper in this type of configuration…
I don’t think I can add anything more than this, so I’ll leave this issue in the competent hands of those who wrote Viper.
Thanks!

Phone gets bricked no matter what ROM and recovery is flashed, stuck on 3.1.2 OOS

I request all to first please understand the problem and give me suggestions as this gets slightly bonkers.
Thanks in advance.
So I had my OnePlus3 A3003 repaired for water Damage from a professional non OnePlus service called Yaantra. They basically replaced the Mother Board is what they say.
I have no reason to doubt, the Phone works flawlessly, everything is working nicely, from the camera to the battery performance and charging and SOT, the performance is as expected.
Only it runs on Oxygen OS 3.1.2.
Now I first got an OTA update notification for 4.5.1 and I immediately started downloading and attempted install. It went through the whole cycle of installing smoothly and after the first reboot, it splashed a linux Penguin Logo and then turned off, never turned back on. I manually pressed the power button after a long time but it again showed the Penguin for a few seconds and powered off. I figured that the phone is bricked. (this time my boot loader was Locked)
I had to follow the 2nd Method of the Mega Unbrick guide and got my phone up and running back on 3.1.2
I still get the OTA update but this time i thought I'll download the latest stable build of 5.0.1 and install it via ADB sideload. with the appropriate recovery
The phone got bricked again.
Then I thought of Installing regular TWRP after unlocking bootloader and flashed 5.0.1, No luck. had to unbrick it again.
Then I tried bluspark.
Then I flashed Experience OS with the latest firmware. It went through the entire cycle and installed but this time after it turned off and on again I was greeted to a new error.
it was in red saying "Battery does not match" in English and then in some Asian language. I was able to unbrick from that state as well.
After that I have tried Lineage OS but with same result. I get "Battery does not match"
Then I unbricked the device and i tried #*808# and checked Charger option. it says "itech_3000mah" that doesn't sound original, is it?
Basically no matter what I flash my phone gets bricked.
With Custom ROMs I get the "Battery does not match error"
With Official ROM I get the penguin Logo.
I've tried all sorts of Combination of Recovery and ROMs to no luck.
So far the only thing I haven't tried is flashing another Kernal.
Have to come back to 3.1.2 after unbricking which works flawlessly every time with no problems AT ALL. I wish to upgrade to the latest Official build of OOS (but i am ok with unofficial as well)

Alright, this is a new one.
Have you checked your system information with the app "AIDA64"? Download that app, and post a screenshot of what's under the System tab.

thes3usa said:
Alright, this is a new one.
Have you checked your system information with the app "AIDA64"? Download that app, and post a screenshot of what's under the System tab.
Click to expand...
Click to collapse
Thanks for the eyeball

AbhiM7 said:
Thanks for the eyeball
Click to expand...
Click to collapse
Okay, although AIDA64 doesn't indicate that your Motherboard is a Chinese mockup Mobo, I still suspect that the "Penguin" logo is some kind of third-party under the hood software.
Have you tried the unbrick tool which includes 5.x.x?

thes3usa said:
Okay, although AIDA64 doesn't indicate that your Motherboard is a Chinese mockup Mobo, I still suspect that the "Penguin" logo is some kind of third-party under the hood software.
Have you tried the unbrick tool which includes 5.x.x?
Click to expand...
Click to collapse
Oh I thought there was only the 3.1.2 available in the unbrick tool.
I would appreciate a link for the 5.x.x unbricking tool.
Which should hopefully include all he required firmware and recovery stuff.
What are other ways I can know if my Mobo is a Chinese mock-up?

AbhiM7 said:
Oh I thought there was only the 3.1.2 available in the unbrick tool.
I would appreciate a link for the 5.x.x unbricking tool.
Which should hopefully include all he required firmware and recovery stuff.
What are other ways I can know if my Mobo is a Chinese mock-up?
Click to expand...
Click to collapse
Hi firstly, you shouldnt have trusted your OnePlus3 with 3rd party service like Yaantra. After service they will deny any changes to your hardware and ask stupid questions "isn't your phone receiving call when we gave it back?"
After seeing your posts, it seems that they didn't flash the device properly. I seriously doubt your battery has been Jacked and replaced with some 3rd party mockup.
A simple search in forums can lead you to 5.x.x unbricking tool.
And your final question. If your phone doesn't bootup even after this, most probably you're dealing with some kind of mockup in the chipset.
Did you solve this issue? If so post how here so that others can use it later.
Thanks

SivaMaxwell said:
Hi firstly, you shouldnt have trusted your OnePlus3 with 3rd party service like Yaantra. After service they will deny any changes to your hardware and ask stupid questions "isn't your phone receiving call when we gave it back?"
After seeing your posts, it seems that they didn't flash the device properly. I seriously doubt your battery has been Jacked and replaced with some 3rd party mockup.
A simple search in forums can lead you to 5.x.x unbricking tool.
And your final question. If your phone doesn't bootup even after this, most probably you're dealing with some kind of mockup in the chipset.
Did you solve this issue? If so post how here so that others can use it later.
Thanks
Click to expand...
Click to collapse
I am downloading this msm recovery
https://forum.xda-developers.com/on...k-phone-msmdownloadtool-v3-0-6-t3575801/page2
and try for now.
I'll post my experience soon.
An official technician from OnePlus told me that fake batteries don't work well / won't find with OnePlus at all so there is 99% chance that it's not a mock-up.

thes3usa said:
Okay, although AIDA64 doesn't indicate that your Motherboard is a Chinese mockup Mobo, I still suspect that the "Penguin" logo is some kind of third-party under the hood software.
Have you tried the unbrick tool which includes 5.x.x?
Click to expand...
Click to collapse
The penguin is the old school linux kernel panic screen. It used to come on when kernel panic prevented the device from booting.
What I am thinking is that is not the right board for that device, which explains the battery error. The custom rom battery error could be gotten around I am sure. Just so it boots.

zelendel said:
The penguin is the old school linux kernel panic screen. It used to come on when kernel panic prevented the device from booting.
What I am thinking is that is not the right board for that device, which explains the battery error. The custom rom battery error could be gotten around I am sure. Just so it boots.
Click to expand...
Click to collapse
I see, do you know how can I get around the battery error?
And should I flash a new kernal to get around the Linux penguin warning?
What are my options other than the mega unbricking with a newer version of OOS

AbhiM7 said:
I see, do you know how can I get around the battery error?
And should I flash a new kernal to get around the Linux penguin warning?
What are my options other than the mega unbricking with a newer version of OOS
Click to expand...
Click to collapse
Sure. You will have to hook up the device to the pc while it is trying to boot and grabbing a logcat. This will tell you exactly what is failing. The build a rom that goes around the issue.
To be honest. I don't know what will work for sure but the logcat will tell you just what you need to know.
Piece of advice. If you are gonna do repairs like this. Do them yourself. Even if you fail you will be sure of the parts at least which you can't be with amature repair techs. Too many use knock off parts.

zelendel said:
Sure. You will have to hook up the device to the pc while it is trying to boot and grabbing a logcat. This will tell you exactly what is failing. The build a rom that goes around the issue.
To be honest. I don't know what will work for sure but the logcat will tell you just what you need to know.
Piece of advice. If you are gonna do repairs like this. Do them yourself. Even if you fail you will be sure of the parts at least which you can't be with amature repair techs. Too many use knock off parts.
Click to expand...
Click to collapse
Am not that much of an expert. I don't know about using logcat but I just read a little about it and am going to try.
I'll post my experience soon.
Should I also take the phone to an official OnePlus technician and ask them to check if the chipset/battery is a mock up, they should be able to tell right?

AbhiM7 said:
Am not that much of an expert. I don't know about using logcat but I just read a little about it and am going to try.
I'll post my experience soon.
Should I also take the phone to an official OnePlus technician and ask them to check if the chipset/battery is a mock up, they should be able to tell right?
Click to expand...
Click to collapse
That depends on how good they are but to be honest if it is a really good fake then it may fool even the best. But it cant hurt.

Actually I got stuck in the same situation. I also tried different ROMs but with custom ones I get the Replace Battery error and with official Roms I get the penguin. Is there any way to get rid of the Battery error by modifying the kernel or something?

You've a motherboard of OP3T not OP3
Try oneplus 3t full ota
Cheers

Lineage OS on A2 lite?

Is it possibleto flash the Lineage treble rom to mi A2 lite?

I still didn't tried this (I must search for a spare phone to use while experimenting with daisy) but you can precede me, simply reset your phone and flash via fastboot with
Code:
fastboot flash system lineagetreblerom.img
You must use the A/B image type.
If something goes wrong you can flash the stock firmware.

BubuXP said:
I still didn't tried this (I must search for a spare phone to use while experimenting with daisy) but you can precede me, simply reset your phone and flash via fastboot with
Code:
fastboot flash system lineagetreblerom.img
You must use the A/B image type.
If something goes wrong you can flash the stock firmware.
Click to expand...
Click to collapse
As far as i understood treble, it is only the vendor partition which is not flashed. So you would still need a LOS compatible kernel to flash (or you are lucky and the original kernel works). Also, LOS needs to be adjusted for specific things on this phone (like resolution, dpi, options to show up in settings, avaiable ram/storage, etc).
So we have to wait until xiaomi or a proper dev releases a kernel source. It would probably also be possible to adjust the build environment to fit the original kernel.
Or did i understand sth wrong here?
edit:
Flashing GSI's should work, it is a nice way to have another rom with more features on the device, but it is not a homebuilt n optimized rom (probably similar perf/battery to stock).

treble gsi rom don't need the vendor partition that's what makes treble great . you just flash the gsi rom into system on a treble compatible device

Hi
sgi ab images works (does not handle well rounded corners as icons are a bit near corners) but works

lineage booted. I will test and report
Both Lineage and RR boots but they are laggy. Camera quality is quite bad.
Both can be used as daily drivers
*can not handle well rounded corners as max-232 said

BubuXP said:
I still didn't tried this (I must search for a spare phone to use while experimenting with daisy) but you can precede me, simply reset your phone and flash via fastboot with
Code:
fastboot flash system lineagetreblerom.img
You must use the A/B image type.
If something goes wrong you can flash the stock firmware.
Click to expand...
Click to collapse
fastboot erase system
fastboot -u flash system name_of_system.img

The Xiaomi MI A2 Lite stock comes compatible with treble, has it been tested with an image of Androoid 9?

menphis said:
The Xiaomi MI A2 Lite stock comes compatible with treble, has it been tested with an image of Androoid 9?
Click to expand...
Click to collapse
yes, I did before.
it booted, but the sgi I used needs a lot of work, many things didn't work.
but, yes, I confirm, it booted

max-232 said:
yes, I did before.
it booted, but the sgi I used needs a lot of work, many things didn't work.
but, yes, I confirm, it booted
Click to expand...
Click to collapse
What SGI you use?

forum.xda-developers.com/project-treble/trebleenabled-device-development/aosp-9-0-phh-treble-t3831915
This above

max-232 said:
yes, I did before.
it booted, but the sgi I used needs a lot of work, many things didn't work.
but, yes, I confirm, it booted
Click to expand...
Click to collapse
max-232 said:
forum.xda-developers.com/project-treble/trebleenabled-device-development/aosp-9-0-phh-treble-t3831915
This above
Click to expand...
Click to collapse
I recently received my A2 Lite, because you do not test the next one that is more stable, as everything works: https://androidfilehost.com/?fid=5862345805528067642
All the files:
https://androidfilehost.com/?w=files&flid=280192

How can flash these post zips with out twrp?

I really hope we get more going ons here it's dead and i cant stand android one if nothing happens soon im going to sell this phone.

mortmaru said:
I really hope we get more going ons here it's dead and i cant stand android one if nothing happens soon im going to sell this phone.
Click to expand...
Click to collapse
I don't think what happening right now is dead, it is still very active and you can flash Lineage or RR if you want
For a few weeks old phone, i consider this as reasonable

mortmaru said:
I really hope we get more going ons here it's dead and i cant stand android one if nothing happens soon im going to sell this phone.
Click to expand...
Click to collapse
This device is new, barely has a month that went on the market, also comes with factory Oreo, also Android 9 came out a few days ago official ...
What development do you need urgently?

menphis said:
This device is new, barely has a month that went on the market, also comes with factory Oreo, also Android 9 came out a few days ago official ...
What development do you need urgently?
Click to expand...
Click to collapse
Some custom roms the base version is awful it is missing so much you cant even backup all stuff from miui to this even app data doesn't transfer over using googles so called backup
With it being month old i expected modded versions even if it was based on the current andriod one loaded with new look bunch of extra options

Can anyone confirm if on AOSP/LOS systems notification LED od still single color (white only)?

Doman said:
Can anyone confirm if on AOSP/LOS systems notification LED od still single color (white only)?
Click to expand...
Click to collapse
It's impossible to have other colors on mi a2, as the phisical LED is only white, not rgb

Another month passes and still nothing.
Hopefully some one will come up with something soon even the official updates for this phone are really slow

Sensors are not working !

I am using Pixy Os 9.0 on Default Kernel And Phone Sensors are stopped Working like (accelerometer, proximity etc.).
I've tried going back to Oreo roms but not success.
Should I try changing kernel or something?

Try flashing this

satyen_ said:
Try flashing this
Click to expand...
Click to collapse
That worked. Thank You

That sensor flashing is easy way. However I took a different time consuming way. Writing it down so that it may help some one else.
When I switched from Oreo AiCP to latest Pie AEX, I went via the hard way. You may read it here https://forum.xda-developers.com/le...bootloader-t3868174/post78256476#post78256476
AEX 6.0 worked well but I too was facing sensor issue. I re-flashed the ROM but no effect. CPU-Z sensor page was complete blank. Yes, I knew the sensor.zip available for flashing but I went ahead to REDO the entire ZUI 1.9 to AEX flashing process.
This time around, all sensors are working fine.

satyen_ said:
Try flashing this
Click to expand...
Click to collapse
How to flash the sensor.zip fie?
I have ZUK Z2131, Android 9 and a problem with proximity sensor, when I answer to a call the display goes black, but I hold the phone in my hand and I can stop the call only with the power button. Will this zip helpinng me? And please tell me how to use it! Many thanks!

mirkios said:
How to flash the sensor.zip fie?
I have ZUK Z2131, Android 9 and a problem with proximity sensor, when I answer to a call the display goes black, but I hold the phone in my hand and I can stop the call only with the power button. Will this zip helpinng me? And please tell me how to use it! Many thanks!
Click to expand...
Click to collapse
Just goto recovery and flash the sensor.zip file.
Yes if the is due to sensors not working then it will help you but if the issue is from rom side code then it might not resolve the issue.
Are other sensors such as auto rotation working? If yes that might indicate that the issue is from rom side

satyen_ said:
Just goto recovery and flash the sensor.zip file.
Yes if the is due to sensors not working then it will help you but if the issue is from rom side code then it might not resolve the issue.
Are other sensors such as auto rotation working? If yes that might indicate that the issue is from rom side
Click to expand...
Click to collapse
I don't know what about the rom, because in the first place I changed the entire frame+screen+touch, all came in one piece. Until then the phone has no OTA, was stock international rom. I changed to Chinese rom because of this problem and step by step, I updated the stock rom until I reached the last version. After that I tried a custom room (this is actually on the phone, Android 9/AospExtended-v6.5-OFFICIAL), but with all rom the phone has the same behavior. So, what do you think?

mirkios said:
I don't know what about the rom, because in the first place I changed the entire frame+screen+touch, all came in one piece. Until then the phone has no OTA, was stock international rom. I changed to Chinese rom because of this problem and step by step, I updated the stock rom until I reached the last version. After that I tried a custom room (this is actually on the phone, Android 9/AospExtended-v6.5-OFFICIAL), but with all rom the phone has the same behavior. So, what do you think?
Click to expand...
Click to collapse
I think the issue is not with any ROM, it is due to the screen and all other replacements, may be after the replacement your proximity sensor is always covered or blocked with something. There are apps on playstore to see the proximity sensor data check if the always shows the same distance/reading i.e. 0 while waving your hand over it, and if yes then the issue might be what I mentioned above. If that's the case you would have to take of the screen and adjust the proximity sensory properly.
Check with this app :
https://play.google.com/store/apps/details?id=imoblife.androidsensorbox

satyen_ said:
Try flashing this
Click to expand...
Click to collapse
I have AOSP 10 on my ZUK. The sensors did not work.
Thank you. Now everything works well.

Question Mobile data disconnects every 25 seconds

Hello
I have a issue on my phone
I rooted my phone with magisk a few days ago and now it has a large issue.
Every 25 seconds, the mobile data shows a cross with a circle. This issue happens about 10 seconds. Then it returns to normal. And then the same thing happens.
It showed IMEI unavailable in my phone settings. Then I typed "chmod 550 NVD_IMEI" and then the issue began.
How do I fix it
Video is down below:
I use the SM-A325F with Android 11
Can I just fix it by flashing the pit file?
Your browser is not able to display this video.

i am apparently facing the same problem on the newest firmware which is A325FXXU2BVG3. I switched to a GSI because this problem was getting on my nerves. this problem doesnt exist in GSI so its a bug with samsung's own firmware.

Captain_cookie_200 said:
i am apparently facing the same problem on the newest firmware which is A325FXXU2BVG3. I switched to a GSI because this problem was getting on my nerves. this problem doesnt exist in GSI so its a bug with samsung's own firmware.
Click to expand...
Click to collapse
Is the 25 seconds mobile data issue also happening to you? Or does it happen permanently?

Franzyy said:
Is the 25 seconds mobile data issue also happening to you? Or does it happen permanently?
Click to expand...
Click to collapse
my mobile data only dies when i hit it with a load e.g. a speed test. and sometimes it dies randomly. its not permanent. calling works fine. when i hit it with a load like loading images the service just goes away permanently for 5 seconds and then comes back. and this keeps repeating.

Captain_cookie_200 said:
my mobile data only dies when i hit it with a load e.g. a speed test. and sometimes it dies randomly. its not permanent. calling works fine. when i hit it with a load like loading images the service just goes away permanently for 5 seconds and then comes back. and this keeps repeating.
Click to expand...
Click to collapse
Should I try doing a nand erase in odin or will it erase imei entirely?

Franzyy said:
Should I try doing a nand erase in odin or will it erase imei entirely?
Click to expand...
Click to collapse
i am sorry i have no such expirience. i dont know what will happen. i am currently just using crdroid 8.8 bgN since that fixes my issue. i have accidently erased my imei before but i restored it by deleting my efs partition then factory resetting (WONT RECOMMEND AT ALL. IF YOU DO THIS DO AT YOUR OWN RISK AND BACKUP THE EFS PARTITION)

Captain_cookie_200 said:
i am sorry i have no such expirience. i dont know what will happen. i am currently just using crdroid 8.8 bgN since that fixes my issue. i have accidently erased my imei before but i restored it by deleting my efs partition then factory resetting (WONT RECOMMEND AT ALL. IF YOU DO THIS DO AT YOUR OWN RISK AND BACKUP THE EFS PARTITION)
Click to expand...
Click to collapse
Nand erase also didnt work, idk what i should do to fix the issue. The thing is if i call someone, i only can call them for 25 seconds before the mobile data disconnects which is stupid.

Captain_cookie_200 said:
i am sorry i have no such expirience. i dont know what will happen. i am currently just using crdroid 8.8 bgN since that fixes my issue. i have accidently erased my imei before but i restored it by deleting my efs partition then factory resetting (WONT RECOMMEND AT ALL. IF YOU DO THIS DO AT YOUR OWN RISK AND BACKUP THE EFS PARTITION)
Click to expand...
Click to collapse
Fixed it, i installed a GSI (phh treble 12 june update), now the mobile data works again with no problems, but the issue is that it laggs.

Franzyy said:
Fixed it, i installed a GSI (phh treble 12 june update), now the mobile data works again with no problems, but the issue is that it laggs.
Click to expand...
Click to collapse
try crdroid 8.8 from here. its way more stable i think. and it has the latest august patch. i love it
Gsi_projects - Browse /v415-Aug/crDroid-8.8 at SourceForge.net
sourceforge.net

Hey I just noticed gaming performance on crdroid is terrible for this phone. I switched to arrow OS. And God demn.. ITS SMOOTH. THE UI ITSELF IS SMOOTH I have yet to check gaming performance. The customization feature ain't that much but this is amazing. If you want to get a lil bit smoother expirience then switch to this GSi. The download link is same as above Just go to files tab AUG-v415 arrow os.

Captain_cookie_200 said:
Hey I just noticed gaming performance on crdroid is terrible for this phone. I switched to arrow OS. And God demn.. ITS SMOOTH. THE UI ITSELF IS SMOOTH I have yet to check gaming performance. The customization feature ain't that much but this is amazing. If you want to get a lil bit smoother expirience then switch to this GSi. The download link is same as above Just go to files tab AUG-v415 arrow os.
Click to expand...
Click to collapse
mm, did you try it already on games feel like going to switch too , also is everything smooth as it used to be on a32 stock rom

bruno244 said:
mm, did you try it already on games feel like going to switch too
Click to expand...
Click to collapse
Oh yeah I am downloading a very heavy game. It will probs take a lot of time (thanks internet) so I'll update here once I test it out. otherwise I'll go back since crdroid had more customization and it also had a game centre that showed fps, changed performance mode and more.

Captain_cookie_200 said:
Oh yeah I am downloading a very heavy game. It will probs take a lot of time (thanks internet) so I'll update here once I test it out. otherwise I'll go back since crdroid had more customization and it also had a game centre that showed fps, changed performance mode and more.
Click to expand...
Click to collapse
Although swiping from guesture navigation is wayy smoother

Captain_cookie_200 said:
Oh yeah I am downloading a very heavy game. It will probs take a lot of time (thanks internet) so I'll update here once I test it out. otherwise I'll go back since crdroid had more customization and it also had a game centre that showed fps, changed performance mode and more.
Click to expand...
Click to collapse
I like crdroid because of all customization and so whatever. I'll just wait for an update from you, so maybe I'll switch then
edit: is fingerprint working?

bruno244 said:
I like crdroid because of all customization and so whatever. I'll just wait for an update from you, so maybe I'll switch then
edit: is fingerprint working?
Click to expand...
Click to collapse
Hey I am back. Sorry for the wait. I didn't test the big game it didn't download yet. But I did test COD Mobile and it works great. Since my phone is rooted I installed gl tools and faked my device unlocking alot of graphics settings. I set all of em to high and the performance is good. I haven't tested with genshin tho. The only thing that makes me sad is that this GSi doesn't come with game space which is included in crdroid. Even tho it's supposed to come with latest versions of arrow os. Although I guess you could install a port and get away with it. Anywho I guess you can test It out for yourself. I'll install a fps counter to check for fps lag too. also I don't know about fingerprint. MY PHONE'S SENSOR IS PHYSICALLY BROKEN so I can't tell since in Samsung stock firmware it doesn't work sooo. Another thing again that this ROM doesn't come with face recognition although I installed LSposed and then installed a module to fix it. Works just like crdroid. Soooooo if you want it tell me and I'll post the links along with instructions.

Captain_cookie_200 said:
Hey I am back. Sorry for the wait. I didn't test the big game it didn't download yet. But I did test COD Mobile and it works great. Since my phone is rooted I installed gl tools and faked my device unlocking alot of graphics settings. I set all of em to high and the performance is good. I haven't tested with genshin tho. The only thing that makes me sad is that this GSi doesn't come with game space which is included in crdroid. Even tho it's supposed to come with latest versions of arrow os. Although I guess you could install a port and get away with it. Anywho I guess you can test It out for yourself. I'll install a fps counter to check for fps lag too. also I don't know about fingerprint. MY PHONE'S SENSOR IS PHYSICALLY BROKEN so I can't tell since in Samsung stock firmware it doesn't work sooo. Another thing again that this ROM doesn't come with face recognition although I installed LSposed and then installed a module to fix it. Works just like crdroid. Soooooo if you want it tell me and I'll post the links along with instructions.
Click to expand...
Click to collapse
UPDATE: GAME SPACE DOES EXIST IN THE GSI. ITS HIDDEN IN THE APP MENU. SORRY I DIDNT CHECK EARLIER

Captain_cookie_200 said:
Hey I am back. Sorry for the wait. I didn't test the big game it didn't download yet. But I did test COD Mobile and it works great. Since my phone is rooted I installed gl tools and faked my device unlocking alot of graphics settings. I set all of em to high and the performance is good. I haven't tested with genshin tho. The only thing that makes me sad is that this GSi doesn't come with game space which is included in crdroid. Even tho it's supposed to come with latest versions of arrow os. Although I guess you could install a port and get away with it. Anywho I guess you can test It out for yourself. I'll install a fps counter to check for fps lag too. also I don't know about fingerprint. MY PHONE'S SENSOR IS PHYSICALLY BROKEN so I can't tell since in Samsung stock firmware it doesn't work sooo. Another thing again that this ROM doesn't come with face recognition although I installed LSposed and then installed a module to fix it. Works just like crdroid. Soooooo if you want it tell me and I'll post the links along with instructions.
Click to expand...
Click to collapse
my fingerprint has been broken since I deleted the efs folder ( that must be the reason it stopped working since then), and yeah please send me the links along with the instructions
also can you please instruct me with these ones too and send links to all of them
"I installed gl tools and faked my device unlocking alot of graphics settings. I set all of em to high and the performance is good. although I installed LSposed and then installed a module to fix it"
Thanks.

bruno244 said:
my fingerprint has been broken since I deleted the efs folder ( that must be the reason it stopped working since then), and yeah please send me the links along with the instructions
also can you please instruct me with these ones too and send links to all of them
"I installed gl tools and faked my device unlocking alot of graphics settings. I set all of em to high and the performance is good. although I installed LSposed and then installed a module to fix it"
Thanks.
Click to expand...
Click to collapse
Oh thats strange. my fingerprint broke even broke i touched the phone. it was full stock with stock recovery and i did not trip knox yet nor did i unlock the boot loader. i dont know my sensor died physically ig. Anyways for the links here you go
Links
Arrow OS 12.1
Face Unlock XDA THREAD (use LSposed) (ROOT)
I think thats all. if i missed anything then tell me. anyways hope you have a smooth experience with this rom.
TO FIX BLUETOOTH AUDIO: go to phh's treble settings go to misc and check the "disable ad2p force offload" or something. should fix it.

Captain_cookie_200 said:
Oh thats strange. my fingerprint broke even broke i touched the phone. it was full stock with stock recovery and i did not trip knox yet nor did i unlock the boot loader. i dont know my sensor died physically ig. Anyways for the links here you go
Links
Arrow OS 12.1
Face Unlock XDA THREAD (use LSposed) (ROOT)
I think thats all. if i missed anything then tell me. anyways hope you have a smooth experience with this rom.
TO FIX BLUETOOTH AUDIO: go to phh's treble settings go to misc and check the "disable ad2p force offload" or something. should fix it.
Click to expand...
Click to collapse
"I installed gl tools and faked my device unlocking alot of graphics settings. I set all of em to high and the performance is good" what about this one

Captain_cookie_200 said:
Oh thats strange. my fingerprint broke even broke i touched the phone. it was full stock with stock recovery and i did not trip knox yet nor did i unlock the boot loader. i dont know my sensor died physically ig. Anyways for the links here you go
Links
Arrow OS 12.1
Face Unlock XDA THREAD (use LSposed) (ROOT)
I think thats all. if i missed anything then tell me. anyways hope you have a smooth experience with this rom.
TO FIX BLUETOOTH AUDIO: go to phh's treble settings go to misc and check the "disable ad2p force offload" or something. should fix it.
Click to expand...
Click to collapse
I don't feel any difference also the scrolling animations are the same as in crdroid, I might stick to the crdroid