[size=+2]TWRP Flashable Stock builds for the Moto G4/G4 Plus[/size]
As you all know, Moto has finally released the first Oreo soak test for select users to test. Thanks to @rajatgupta1998, we all get to try it out
[size=+1]About these builds[/size]
This is the stock firmware, repackaged to be flashable in TWRP Recovery. In an effort to make these zips safer, I have removed all bootloader and gpt (partition table) related items.
[size=+1]Requirements[/size]
-> Unlocked bootloader
-> TWRP Recovery Installed (or booted)
[size=+1]Installation[/size]
-> Download the TWRP Flashable zip (Links below)
-> Place zip on device (internal or external storage)
-> Reboot to TWRP (or boot it)
-> Flash zip && Profit
[size=+1]Downloads[/size]
Nougat 7.0 (April 1st Security Patch)
• AFH -- TWRP-athene-7.0.0-NPJS25.93-14-18.zip
• G-Drive -- TWRP-athene-7.0.0-NPJS25.93-14-18.zip
md5sum == 71cab7a1bdebb067c569366dcaa26968
Oreo 8.1.0 Soak Test (November 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.108.zip
• G-Drive -- TWRP-athene-8.1.0-OPJ28.108.zip
md5sum == c995bcb22215346e362195447de686f8
Oreo 8.1.0 (December 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.111-12.zip
• G-Drive -- TWRP-athene-8.1.0-OPJ28.111-12.zip
md5sum == d7f7a0acdbb8e4bd24fa89e8513ec21c
Oreo 8.1.0 (December 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.111-22.zip <-- coming soon
• G-Drive -- TWRP-athene-8.1.0-OPJ28.111-22.zip
md5sum == coming soon
[size=+1]Other Notes[/size]
* If you want to root, use Magisk and just flash in TWRP immediately after flashing the newest Oreo build. The latest build now fully passes SafetyNet and shows the device as being Certified in the Play Store.
* If you're already on the previous Oreo build (OPJ28.108 - November Security Patch), you can easily update to the latest Oreo build (OPJ28.111-12 - December Security Patch) by dirty flashing. If you want to keep root, you'll still need to flash Magisk again after flashing the newer build.
* To root the Nougat build(s), you will need to flash a custom kernel, then flash Magisk (same as before).
[size=+2]XDA:DevDB Information[/size]
[size=+1]TWRP Flashable Stock Builds, ROM for the Moto G4/G4 Plus[/size]
Contributors
@Jleeblanch, @rajatgupta1998, Motorola Mobility LLC
ROM OS Version: Android Oreo 8.1.0 - December 1st Security Patch
ROM Kernel: v3.10.84
Version Information:
Status: Beta
Created: 2018-11-26
Last Updated: 2019-01-09
**Reserved**
Coming from Pixel Experience 9.0 rom, wiped and installed. Working great so far. I hope we see an official rom soon.
zerocoolriddler said:
Coming from Pixel Experience 9.0 rom, wiped and installed. Working great so far. I hope we see an official rom soon.
Click to expand...
Click to collapse
these ROM have the same problems with camera like a soak test bulid?
all wipes needed to install these ROM?
vlrgamaley said:
these ROM have the same problems with camera like a soak test bulid?
Click to expand...
Click to collapse
This IS the Moto Soak test build. I've just made it TWRP flashable and safer for everyone to use. But yes, to answer your question, the issue with the Camera and Flashlight tile taking a few (5 or more) seconds to open is present here. There isn't anything I can do about that, however when Moto releases a future OTA update and have fixed the issue, I will make a new zip and post it here.
I will also make a nougat build of NPJS25.93-14-18 that is TWRP flashable as well for anyone who would like to be on stock nougat or easily revert back to stock nougat.
Thanks for your Hard Work.
Jleeblanch said:
ROM OS Version: Android Oreo 8.1.0 - November 1st Security Patch
ROM Kernel: v3.10.84
Click to expand...
Click to collapse
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Thanks, I guess I won't be bored until I decide to unlock my G6 Plus
Jleeblanch said:
[size=+1]TWRP Flashable Stock builds for the Moto G4/G4 Plus[/size]
As you all know, Moto has finally released the first Oreo soak test for select users to test. Thanks to @rajatgupta1998, we all get to try it out
About this build
What is different about this versus what's already available? Basically what I have done is taken the previous 7.0 (nougat) firmware and directly patched it using the 8.1.0 (oreo) OTA zip from this thread. In an effort to make this build safer for everyone to use, I have left out any bootloader related items which is what can potentially prevent you from being able to downgrade. If this had been an official release, I would also have removed dm-verity (and forced encryption) as needed also. But being this is a test build from Moto, they have yet to enable such features. Now, on to the good stuff.
Requirements
-> Unlocked bootloader
-> TWRP Recovery Installed (or booted)
-> You may or may not need to be on stock nougat prior, need confirmation on this
Installation
-> Download the TWRP Flashable zip (Links below)
-> Place zip on device (internal storage or external)
-> Reboot to TWRP (or boot it)
-> Flash zip && Profit
Downloads
Oreo 8.1.0 Soak Test (November 1st Security Patch)
AFH - TWRP-athene-OPJ28.108.zip
G-Drive - TWRP-athene-OPJ28.108.zip
md5sum = c995bcb22215346e362195447de686f8
Other Notes
Currently as mentioned in the other thread, the build doesn't fully pass SafetyNet as it's a test release. You can use Magisk modules to fix this if needed.
You can also easily root by flashing Magisk immediately after the TWRP zip or any time afterwards.
[size=+2]XDA:DevDB Information[/size]
[size=+1]TWRP Flashable Stock Builds, ROM for the Moto G4/G4 Plus[/size]
Contributors
@Jleeblanch, @rajatgupta1998, Motorola Mobility LLC
ROM OS Version: Android Oreo 8.1.0 - November 1st Security Patch
ROM Kernel: v3.10.84
Version Information:
Status: Beta
Created: 2018-11-26
Last Updated: 2018-11-26
Click to expand...
Click to collapse
Thanx your .zip fixed the sim issues . Thanx mate
Jleeblanch said:
This IS the Moto Soak test build. I've just made it TWRP flashable and safer for everyone to use. But yes, to answer your question, the issue with the Camera and Flashlight tile taking a few (5 or more) seconds to open is present here. There isn't anything I can do about that, however when Moto releases a future OTA update and have fixed the issue, I will make a new zip and post it here.
I will also make a nougat build of NPJS25.93-14-18 that is TWRP flashable as well for anyone who would like to be on stock nougat or easily revert back to stock nougat.
Click to expand...
Click to collapse
Waiting for the Nougat build! Really need to go back to stock. Thank you for your work!
Awesome work dont stop keep up the good work
I`ve had previously RR 5.8 (Nougat 7.1, no custom kernels) and try install your ROM (without wipes, like you describe in instruction). Result? Bootloop. I have Moto 2g RAM/16 Gb Flash, install through rajatgupta recovery v 3.2.1-r3. Try now with wipes, but i don`t have confidence for good result.
try again with wipes, works normally. woah
jer194 said:
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Click to expand...
Click to collapse
I doubt any of the stock kernels currently available would work as they're intended for nougat (7.0).
corlatemanuel said:
Thanks, I guess I won't be bored until I decide to unlock my G6 Plus
Click to expand...
Click to collapse
Fair enough. I'm surprised you haven't unlocked the bootloader yet, LineageOS is pretty good for the G6+ and also is used as a base ROM for flashing GSI's. I'll be making a stock based custom kernel (and one for the custom rom's/GSI's soon too).
DanFaraday777 said:
Waiting for the Nougat build! Really need to go back to stock. Thank you for your work!
Click to expand...
Click to collapse
I gotta finish up some TWRP flashable builds for the Moto G6 and then I'll upload the one I made for nougat when I upload those [emoji41]
luv u
thanks a lot
Thanks for zip :good:
What do you mean by "Stock nougat prior"?
Sorry for the dump question
Henry Markle said:
What do you mean by "Stock nougat prior"?
Sorry for the dump question
Click to expand...
Click to collapse
I mean the latest stock nougat build NPJS25.93-14-18
jer194 said:
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Click to expand...
Click to collapse
To expand on Jleeblanch's reply, you may have to wait for Motorola to release the Oreo kernel source code, so developers can work on improving the kernel. Best thing to do is to check the Motorola Mobility GitHub page every so often, where you may see a request for the Oreo source code for our device appear https://github.com/MotorolaMobilityLLC/kernel-msm/issues Once there's a request made, Motorola should release the code when it's ready for release and then pave the way for custom Oreo kernels
echo92 said:
To expand on Jleeblanch's reply, you may have to wait for Motorola to release the Oreo kernel source code, so developers can work on improving the kernel. Best thing to do is to check the Motorola Mobility GitHub page every so often, where you may see a request for the Oreo source code for our device appear https://github.com/MotorolaMobilityLLC/kernel-msm/issues Once there's a request made, Motorola should release the code when it's ready for release and then pave the way for custom Oreo kernels
Click to expand...
Click to collapse
I would make the request myself, same as I've done for other devices (currently have a request up for beckham) but being that this is supposed to be a private soak test, not sure if they'll appreciate it just yet. But best believe, when they release the official Oreo build, I'll be all over it (assuming someone doesn't beat me to it [emoji6])
Jleeblanch said:
I would make the request myself, same as I've done for other devices (currently have a request up for beckham) but being that this is supposed to be a private soak test, not sure if they're appreciate it just yet. But best believe, when they release the official Oreo build, I'll be all over it (assuming someone doesn't beat me to it [emoji6])
Click to expand...
Click to collapse
Oh yup, it'd probably be a bit soon to put in a request, and I imagine they may change the kernel source code for the final release anyway (e.g. if they update to the latest security patch). Thanks for keeping a close eye on it - exciting times ahead
Related
Since joeyhuab has removed the link from his post, but many of us use the 10.0.2.0 firmware combined with his 11.12 update of PE, i have re-posted the december 10.0.2.0.PDHMIFK 9.0 modem update.
**Do not use this with update 16.12 or 17.12 of PE. The developer have told you that those updates requires a firmware downgrade to 9.6.8.0, and i'm telling you again!!
It works perfectly and tested by me on;
LOS 16 r21
PE (The perfect combo if you ask me)
Liquid Remix
AEX
and HavocOS
it will probably work on any pie rom but i didn't test any other rom than those listed above.
Gdrive Download
Xiaomi Just released Pie version 10.0.3.0 OTA. Curious if LTE problems will be resolved with the firmware of this ROM. I think OP will extract and publish firmware soon.
Thank you for this!
It mostly works with Mi A1 + Treble + Pixel Experience (Pie), but calls don't have audio at all (!).
rstacruz said:
Thank you for this!
It mostly works with Mi A1 + Treble + Pixel Experience (Pie), but calls don't have audio at all (!).
Click to expand...
Click to collapse
Hi, I'm having the same problem with audio in calls. I already used many ROMs and nothing worked. Does anyone know what to do?
I have uploaded a fix, check the new thread.
https://forum.xda-developers.com/mi-a1/themes/twrp-voice-calls-fix-10-0-3-0-firmware-t3882745
MVPAsafS said:
Since joeyhuab has removed the link from his post, but many of us use the 10.0.2.0 firmware combined with his 11.12 update of PE, i have re-posted the december 10.0.2.0.PDHMIFK 9.0 modem update.
**Do not use this with update 16.12 or 17.12 of PE. The developer have told you that those updates requires a firmware downgrade to 9.6.8.0, and i'm telling you again!!
It works perfectly and tested by me on;
LOS 16 r21
PE (The perfect combo if you ask me)
Liquid Remix
AEX
and HavocOS
it will probably work on any pie rom but i didn't test any other rom than those listed above.
Gdrive Download
Click to expand...
Click to collapse
hi, can you re upload this firmware file, the link is broken currently. thanks.
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on chiron
Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (choose ARM64 as Platform and 9.0 as Android, use the Variant you want. Recommended nano package)
Required TWRP recovery
twrp-3.3.1-chiron-20190608.img
Official root addon and weather provider
LineageOS Extras
Changelog:
Changes for chiron
Bug reports:
How to submit a bug report
LineageOS GitLab
Donate to support development:
Donate via PayPal to mikeioannina
Donate via PayPal to wight554
Donate via PayPal to LineageOS
XDA:DevDB Information
Official LineageOS 16.0 for Mi MIX 2, ROM for the Xiaomi Mi Mix 2
Contributors
mikeioannina, wight554
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI Stable V10.4.1.0
Based On: LineageOS
Version Information
Status: Nightly
Created 2019-06-09
Last Updated 2019-08-19
MiuiCamera
I have created a flashable ZIP based on @NeoArian Mi 6 ZIP to get MiuiCamera on LineageOS 16.0 for Xiaomi Mi MIX 2 with the new android 9.0 blobs.
The file is attached to this post. Note that it will overwrite the default Snap Camera app so that you don't have two apps. Because of the included addon.d script the Snap Camera will automatically gets overwritten and MiuiCamera will gets installed over upcoming OTA's. If you want to get rid of this Module just remove /system/addon.d/69-MiuiCamera.sh and reflash the build of you choice, MiuiCamera will get removed and Snap will be added back.
Frequently asked Questions
Which firmware should i use?
Since the 4th of August 2019 You need the firmware of any 9.0 miui. Download the Global Stable firmware here: https://androidfilehost.com/?fid=6006931924117930761
Click to expand...
Click to collapse
Which recovery should i use?
You should use this TWRP: https://androidfilehost.com/?fid=6006931924117891791 because the official one is not up to date with this ROM and can't decrypt your data. Don't use a recovery for System as Root because this official LineageOS does not use System as Root.
Click to expand...
Click to collapse
Awesome! thank you @mikeioannina !!! I'll test tomorrow !
Link to the recommended firmware 10.0.2.0: https://osdn.net/projects/xiaomifir...2Global_V10.0.2.0.ODEMIFH_4766e733e7_8.0.zip/
Link to Orangefox recovery (compatible with this build and detects previous encryption): https://sourceforge.net/projects/orangefox/files/chiron/OrangeFox-R9.0-1-chiron.zip/download
I might be a dumbass but the download page only displays 15.1 downloads, no?
yeyeoke said:
I might be a dumbass but the download page only displays 15.1 downloads, no?
Click to expand...
Click to collapse
You are right!
Mike thanks for the update! We're waiting to upload it!
16.0 Not released yet
krasny2k5 said:
Awesome! thank you @mikeioannina !!! I'll test tomorrow !
Link to the recommended firmware 9.1.24: https://github.com/XiaomiFirmwareUp...n_miui_MIMIX2Global_9.1.24_33b7dc74ff_8.0.zip[/
Another question, i come from che latest Eu pie 9.6.5 beta, will i have any problem? Thanks guy
Click to expand...
Click to collapse
Brunaldo77 said:
but in the op there is no mention of any firmware. Si it necessary or not?
Another question, i come from che latest Eu pie 9.6.5 beta, will i have any problem? Thanks guy
Click to expand...
Click to collapse
OP clearly says "ROM Firmware Required: MIUI 9.1.24".
Don't even think about pairing a Pie FW with this. Flashing a FW doesn't take you a minute.
AndyYan said:
OP clearly says "ROM Firmware Required: MIUI 9.1.24".
Don't even think about pairing a Pie FW with this. Flashing a FW doesn't take you a minute.
Click to expand...
Click to collapse
Yes sorry, i edit my post immediatelly, thanks for the reply
It seems that there was a problem with today's and yesterday's builds. It will be fixed soon. More info at https://builds.lineageos.org/ and https://www.reddit.com/r/LineageOS/comments/bykqrx/160_lineageos_builder_fail_20190609_security_bump
Yes there seems to be an issue with signing and the guy responsible for it (zifnab) is currently away for a few days :/
We can only hope it fixes itself or wait until saturday
0w0 lets see if theres luck
Just tried flashing, it just ends in Error 7, using the recommended firmware and twrp. I formated everything and then tried to flash.
Verifying package compatibility...
I:Extracting updater binary 'META-INF/com/google/android/update-binary'
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment not used in updater.
SELinux: Loaded file_contexts
script aborted: assert failed: xiaomi.verify_trustzone("TZ.BF.4.0.6-00124","TZ.BF.4.0.6-00130") == "1"
yeyeoke said:
Just tried flashing, it just ends in Error 7, using the recommended firmware and twrp. I formated everything and then tried to flash.
Verifying package compatibility...
I:Extracting updater binary 'META-INF/com/google/android/update-binary'
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment not used in updater.
SELinux: Loaded file_contexts
script aborted: assert failed: xiaomi.verify_trustzone("TZ.BF.4.0.6-00124","TZ.BF.4.0.6-00130") == "1"
Click to expand...
Click to collapse
The same for me, arb
---------- Post added at 07:15 AM ---------- Previous post was at 07:00 AM ----------
Brunaldo77 said:
The same for me, arb
Click to expand...
Click to collapse
Any solution to remove arb?
I've just gathered some local feedback, and it seems that the 9.1.24 FW requirement Mike posted is simply incorrect - keep using Stable V10.0.2.0 (as all other Pie ROMs that are based on Oreo FW do), else you'd get that TZ mismatch error.
Given that I've been building unofficial LOS from Wight's trees for quite some time, which Wight also pushed to official, and we've been using V10.0.2.0 all along until Pie FW dropped, I believe this is reasonable. Plus, we've never seen another ROM require 9.1.24 either.
Same here: assert failed: xiaomi.verify_trustzone("TZ.BF.4.0.6-00124","TZ.BF.4.0.6-00130") == "1"
TWRP: twrp-3.3.1-chiron-20190608.img
Firmware: tried with 9.1.4_8.0 (and also by mistake with 9.5.8_9.0)
But thanks anyway- I'm sure everything will work in some days!
AndyYan said:
I've just gathered some local feedback, and it seems that the 9.1.24 FW requirement Mike posted is simply incorrect - keep using Stable V10.0.2.0 (as all other Pie ROMs that are based on Oreo FW do), else you'd get that TZ mismatch error.
Given that I've been building unofficial LOS from Wight's trees for quite some time, which Wight also pushed to official, and we've been using V10.0.2.0 all along until Pie FW dropped, I believe this is reasonable. Plus, we've never seen another ROM require 9.1.24 either.
Click to expand...
Click to collapse
i've checked and and my result is anti: 1
Am I stuck with custom rom? I have active arb? Thanks in advance Andy
Brunaldo77 said:
i've checked and and my result is anti: 1
Am I stuck with custom rom? I have active arb? Thanks in advance Andy
Click to expand...
Click to collapse
We've been Anti=1 since last September. Go ahead. As I've said, there are already successful local attempts at it.
Hello guys, for those who have problems with the flash of the rom, I can say that if you'll use the firmware from andyyan repo (fw_chiron_miui_MIMIX2Global_V10.0.2.0.ODEMIFH) you won't have problems with the installation.
ck007 said:
Hello guys, for those who have problems with the flash of the rom, I can say that if you'll use the firmware from andyyan repo (fw_chiron_miui_MIMIX2Global_V10.0.2.0.ODEMIFH) you won't have problems with the installation.
Click to expand...
Click to collapse
I have it in my SF folder as a mirror; the original is here: https://osdn.net/projects/xiaomifir...X2Global_V10.0.2.0.ODEMIFH_4766e733e7_8.0.zip
This is a custom recovery flashable pure stock firmware. It is based on the A.07 ozip which was released as RMX1901EX_11_OTA_0070_all_6m8Kht2yFPh5.ozip on official realme website. Until kernel source is completed, i'll keep working on it.
Prerequisites
Unlocked bootloader
Custom recovery installed (TWRP/PBRP/Orange Fox)
Recommended:
TWRP Here
PBRP : Here
Instructions
Dirty Flash:
1. Download
2. Reboot to recovery
3. Select install & choose the zip
4. Swipe to flash
5. Reboot
Clean Flash:
1. Download
2. Reboot to recovery
3. Wipe all (cache, dalvik-cache, system, data, internal storage)
4. Select install & choose the zip
5. Swipe to flash
6. Format data
7. Reboot
Recommended: Clean Flash
Features
For now, it's pure stock. Nothing fancy here.
Just a life saver for whom who messed with system/vendor and have no backup.
Bugs
Clean Flash:
1. Nothing, you tell me.
2. Didn't tested OTG, i don't have one.
Dirty Flash:
1. Maybe it is going to inherit the bugs you have currently, again maybe it could fix them (i.e i dirty flashed when the google/fb/twitter sign in are crashing with blank screen and it fixed that)
2. MTP didn't let linux to access the files though it was showing all.
3. You report me yours.
Stock Firmware Info
Build Number: RMX1901EX_11_A.07
Security Patch: August 5, 2019
To Do
1. remove bloatwares.
2. make it a very minimal zip.
3. another variant with pre root.
4. any other good things if i forgot to mention.
Note: I don't have broadband bandwidth to frequently update this. I'll update once it's debloated or on some major changes.
Screenshots
I forgot to take screenshots because i was recording. Again it's 2 GB of recording and compressing to upload to youtube tomorrow. Though i have some pictures from other device. You can find those in screenshots section.
Downloads
Google Drive
Support Development
If you are capable, you should support development. I have the device in hand, have a good pc only thing missing is the bandwidth. I use mobile internet & have to do recharge for every upload or download. If you are willing to support, below is my address.
Google Pay (UPI): [email protected]
See you in future update.
XDA:DevDB Information
Recovery Flashable Stock ROM For Realme X, ROM for the Realme X
Contributors
chankruze
Source Code: https://www.realme.com/in/support/software-update
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery
Based On: RMX1901EX_11_A.07
Version Information
Status: Stable
Current Stable Version: 0.0.2
Stable Release Date: 2019-09-29
Created 2019-09-28
Last Updated 2019-09-29
Can China variant flash this? Thx
is everything working fine? volte, camera, fingerprint?
At last have been asking Ajit for long time xD
nickyip123 said:
Can China variant flash this? Thx
Click to expand...
Click to collapse
Which firmware you use ?
If you use official firmware from here, then it should work.
vikasjangid said:
is everything working fine? volte, camera, fingerprint?
Click to expand...
Click to collapse
Yes, Camere (both front and back), fingerprint and VoLTE.
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
can i flash into my china realme x, i am running RMX1901CN_A17 version.
Its Just the same old color OS.
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
indroider said:
At last have been asking Ajit for long time xD
Click to expand...
Click to collapse
what?
About this flashable a07 zip .. Remember in group.. Raunaq ..?
@4j17h
I asked u about making this zip few weeks ago
Does jio volte work on Indian variant?
ghostEye said:
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
Click to expand...
Click to collapse
The title says stock os ,
The features says stock os nothing fancy. You got exactly what is said. Nothing is misleading here.
---------- Post added at 07:41 PM ---------- Previous post was at 07:35 PM ----------
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
it is color os as described clearly.
indroider said:
About this flashable a07 zip .. Remember in group.. Raunaq ..?
@4j17h
I asked u about making this zip few weeks ago
Click to expand...
Click to collapse
ahha Raunaq yes, I remember you.
Can we flash it on oppo k3 ?
Oppo k3 have the same hardware as realme X just the camera is 16mp ( same sensor as realme 3 pro), so can we flash this rom and change the camera app ?
Hello, on chinese model I receive error 7 (error patching system image), can you help me?
Hey
I am new to this segment
Please explain, if I wipe my internal storage also, from where will I install the custom rom?
Isn't the custom rom should be kept in the internal storage before installing?
phone is stuck in bootloop.
my phone is stuck on realme logo and reboot to recovery what should i do now?i am not able to boot my phone even with other roms like aosp. please help!!
Please make it flashable in Chinese variant too.thanks in advance
How to root this rom? What magisk do you use?
djozgandoz said:
How to root this rom? What magisk do you use?
Click to expand...
Click to collapse
Note:- Rooting stock rom with magisk will only work in core only mode. Hence no modules are going to be loaded.
Both 19.4 & 20.0 working. Flash the zip from recovery mode.
Hello, I was wondering if I need to update my firmware on my Xiaomi Redmi Note 5 Pro (whyred).
The reason for it is because it shows "1. November 2018" as latest vendor security patch level.
I am currently running LineageOS 17.1 which is based on Android 10 together with the Lineage recovery.
Mainly I have these questions:
1. Do I need to update the vendor firmware? In other words would that even increase the Vendor security patch level?
2. When I checked this website: https://xiaomifirmwareupdater.com/firmware/whyred/ it shows the latest Vendor Firmware to be from 2021, however with Android 9.0, would that even work with LineageOS 17.1 which is Android 10 level?
3. Would I need to flash back to the official Rom on Android 9.0 in order to then flash to the 2021 firmware ( should be included in the latest official rom anyway) and then flash back to LineageOS 17.1?
Any help is greatly appreciated as this is my first phone on LineageOS. (I did had a couple of other phones in the past with unofficial Roms so I am not a completely noob.)
Thanks and have a good day
StriKe_jk said:
Hello, I was wondering if I need to update my firmware on my Xiaomi Redmi Note 5 Pro (whyred).
The reason for it is because it shows "1. November 2018" as latest vendor security patch level.
I am currently running LineageOS 17.1 which is based on Android 10 together with the Lineage recovery.
Mainly I have these questions:
1. Do I need to update the vendor firmware? In other words would that even increase the Vendor security patch level?
2. When I checked this website: https://xiaomifirmwareupdater.com/firmware/whyred/ it shows the latest Vendor Firmware to be from 2021, however with Android 9.0, would that even work with LineageOS 17.1 which is Android 10 level?
3. Would I need to flash back to the official Rom on Android 9.0 in order to then flash to the 2021 firmware ( should be included in the latest official rom anyway) and then flash back to LineageOS 17.1?
Any help is greatly appreciated as this is my first phone on LineageOS. (I did had a couple of other phones in the past with unofficial Roms so I am not a completely noob.)
Thanks and have a good day
Click to expand...
Click to collapse
LOS has old version of vendors. Yes from 2018.. they build on that... if you wanna updated version go to LOS github and ask there.. that's how it is, nothing can be done here. Only LOS team can help you.
Good luck and stay safe!
drnightshadow said:
LOS has old version of vendors. Yes from 2018.. they build on that... if you wanna updated version go to LOS github and ask there.. that's how it is, nothing can be done here. Only LOS team can help you.
Good luck and stay safe!
Click to expand...
Click to collapse
Does this mean 2018 is the latest vendor security patch level?
StriKe_jk said:
Does this mean 2018 is the latest vendor security patch level?
Click to expand...
Click to collapse
If you use LOS, than yes.
Maybe I am a bit dense to understand this, but shouldn't all have the same? I thought Vendor security patch level are bugfixes from the vendor, so it only makes sense to me to include the latest patches in all roms to get this baseline patch level. Ofc every ROM can feel free to increase security even further with additional patches on top of that.
StriKe_jk said:
Maybe I am a bit dense to understand this, but shouldn't all have the same? I thought Vendor security patch level are bugfixes from the vendor, so it only makes sense to me to include the latest patches in all roms to get this baseline patch level. Ofc every ROM can feel free to increase security even further with additional patches on top of that.
Click to expand...
Click to collapse
Yap, but every custom Rom has it's own vendor version. LOS has old one and many custom ROMs. It's actually developer decision what version he's gonna use to build rom. That's it. Yes MIUI ROM uses latest. You can't mix them because you'll get bootloop or bricked device.
For latest version you need to ask developer to update it.
StriKe_jk said:
1. Do I need to update the vendor firmware? In other words would that even increase the Vendor security patch level?
Click to expand...
Click to collapse
The vendor security patch level is just a setting configured here: https://github.com/LineageOS/androi...0038ae0340b1da03ae9c00ff50/BoardConfig.mk#L56
The official LOS 18.1 rom contains at least some vendor blobs from the latest MIUI V12.0.2.0.PEIMIXM rom.
That probably means the vendor security patch level date is not accurate and can be ignored.
StriKe_jk said:
2. When I checked this website: https://xiaomifirmwareupdater.com/firmware/whyred/ it shows the latest Vendor Firmware to be from 2021, however with Android 9.0, would that even work with LineageOS 17.1 which is Android 10 level?
Click to expand...
Click to collapse
Yes, it works. Considering you are currently using even older firmware.
StriKe_jk said:
3. Would I need to flash back to the official Rom on Android 9.0 in order to then flash to the 2021 firmware ( should be included in the latest official rom anyway) and then flash back to LineageOS 17.1?
Click to expand...
Click to collapse
You can flash the firmware ZIP from https://xiaomifirmwareupdater.com/firmware/whyred/. It only updates the various firmware partitions without touching the "boot", "system" and "vendor" partitions (on which LOS is installed).
For some reason the firmware ZIP is missing the new boot logo. It can be updated manually by extracting the file "/firmware-update/splash.img" from the latest MIUI Rom and flashing it in Fastboot Mode with
Code:
fastboot flash splash splash.img
I'm on Lineage OS 18.1 now with Android 11 and figured I just leave it as is. But thanks all for the help
Derpfest A13 (Tango) for the OnePlus 9 Pro.
Unofficial for now, will apply for official momentarily.
Just Posting links for now, Thread will be properly formed and Cleaned Up Later this Weekend.
Requirements : C66 FW
Known Info
Uses ZPOS and Oss display Stack, so probably third party kernels won't be supported for now, if you change the
Possible issues will be caused like broken FOD./UDFPS.
Enforcing Build.
System/ROM works just fine .
Jan security patch QPR build.
Don't panic if first boot acts weird.
Todo: Cleanup Thread
Remove some more oplus ****s
Flashing Instr: Same like any Roms.
flash boot, vendor_boot and dtbo and sideload/ Flash with TWRP.
C66 FW: https://t.me/area51lemonade/452
Download here :
DerpFest-13-Initial_Build-OnePlus9Pro.zip
drive.google.com
Report and feedback can be done at TG group
Provided : https://t.me/area51lemonade
Kernel source : https://github.com/LineageOS/android_kernel_oneplus_sm8350
Rom source :
DerpFest AOSP
"German Engineering". DerpFest AOSP has 188 repositories available. Follow their code on GitHub.
github.com
Update 2:
Standy Issue Solved (kinda, its like hit or miss now)
Sepolicy Cleaned up a bit
User build
January SP
Improved Haptics Implementation (oos like).
here are few of the builds which might be worth trying, also includes initial build.
idk which build to be specific but one of it has everything working and less display crashes and fully working oos cam
Im having my exams starting Friday, so i wont be doing AOSP for some while.
thanks and here are the links
Release - Google Drive
drive.google.com
Res
Res
Thank you friend.
Very nice. Hopefully DerpFest official for our OP9P very soon. Thank you
C.66 firmware is included in rom ?
ElitePotato said:
C.66 firmware is included in rom ?
Click to expand...
Click to collapse
no, you have to flash the FW or flash some roms which already includes them like Xtended.
Sherif Rahim said:
Derpfest A13 (Tango) for the OnePlus 9 Pro.
Unofficial for now, will apply for official momentarily.
Just Posting links for now, Thread will be properly formed and Cleaned Up Later this Weekend.
Requirements : C66 FW
Known Info : Oos Cam - Only Photo Mode works, rest all are Broken.
Userdebug Build for now, next on it will be user release type.
Uses ZPOS and Oss display Stack, so probably third party kernels won't be supported for now.
Possible issues will be caused like broken FOD./UDFPS.
Enforcing Build.
System/ROM works just fine .
December security patch QPR build.
Don't panic if first boot takes some time, give it some time.
Expect the Next build on or before 15th Jan.
Todo: Cleanup Thread
Remove some more oplus ****s
shift to user build
Merge oplus camera fully
Add Dolby
And some other under the hood improvements planned.
Download here :
DerpFest-13-Initial_Build-OnePlus9Pro.zip
drive.google.com
Report and feedback can be done at TG group
Provided : https://t.me/area51lemonade
Kernel source : https://github.com/LineageOS/android_kernel_oneplus_sm8350
Rom source :
DerpFest AOSP
"German Engineering". DerpFest AOSP has 188 repositories available. Follow their code on GitHub.
github.com
Click to expand...
Click to collapse
Amazing work i like Derpfest so much! Hope you keep update
Sherif Rahim said:
no, you have to flash the FW or flash some roms which already includes them like Xtended.
Click to expand...
Click to collapse
Are you sure it is included in Xtended ? There is a separate C.66 firmware flasher on sourceforge. Can I just flash C.66 firmware over OOS13 and flash rom ?
ElitePotato said:
Are you sure it is included in Xtended ? There is a separate C.66 firmware flasher on sourceforge. Can I just flash C.66 firmware over OOS13 and flash rom ?
Click to expand...
Click to collapse
not adviced
phone is not waking up from standby
habobababo said:
phone is not waking up from standby
Click to expand...
Click to collapse
Could you maybe grab logs?
Sherif Rahim said:
Could you maybe grab logs?
Click to expand...
Click to collapse
here you go.
I don't see any flashing instructions. So my guess is just use los recovery and flash?
NameIsOptional said:
I don't see any flashing instructions. So my guess is just use los recovery and flash?
Click to expand...
Click to collapse
Yes but you need C.66 firmware which you can find in xtended rom instructions.
NameIsOptional said:
I don't see any flashing instructions. So my guess is just use los recovery and flash?
Click to expand...
Click to collapse
will cleanup and organise the thread this weekend
Does someone got problems with standby?
habobababo said:
Does someone got problems with standby?
Click to expand...
Click to collapse
yes its an known issue, will work on the rom this weekend
Standy Issue Solved
Sepolicy Cleaned up a bit
User build
January SP
Improved Haptics Implementation (oos like)
More Camera modes on Ooscam is now there, but i wasnt able to figure out Video mode.
Also Let me know if Alert Slider was working for everyone?, Because rn its ded .
Lmk