Develop Bugs

[ROM] TWRP Flashable Stock Firmware [7.0][8.1.0]

[size=+2]TWRP Flashable Stock builds for the Moto G4/G4 Plus[/size]
As you all know, Moto has finally released the first Oreo soak test for select users to test. Thanks to @rajatgupta1998, we all get to try it out
[size=+1]About these builds[/size]
This is the stock firmware, repackaged to be flashable in TWRP Recovery. In an effort to make these zips safer, I have removed all bootloader and gpt (partition table) related items.
[size=+1]Requirements[/size]
-> Unlocked bootloader
-> TWRP Recovery Installed (or booted)
[size=+1]Installation[/size]
-> Download the TWRP Flashable zip (Links below)
-> Place zip on device (internal or external storage)
-> Reboot to TWRP (or boot it)
-> Flash zip && Profit
[size=+1]Downloads[/size]
Nougat 7.0 (April 1st Security Patch)
• AFH -- TWRP-athene-7.0.0-NPJS25.93-14-18.zip
• G-Drive -- TWRP-athene-7.0.0-NPJS25.93-14-18.zip
md5sum == 71cab7a1bdebb067c569366dcaa26968
Oreo 8.1.0 Soak Test (November 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.108.zip
• G-Drive -- TWRP-athene-8.1.0-OPJ28.108.zip
md5sum == c995bcb22215346e362195447de686f8
Oreo 8.1.0 (December 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.111-12.zip
• G-Drive -- TWRP-athene-8.1.0-OPJ28.111-12.zip
md5sum == d7f7a0acdbb8e4bd24fa89e8513ec21c
Oreo 8.1.0 (December 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.111-22.zip <-- coming soon
• G-Drive -- TWRP-athene-8.1.0-OPJ28.111-22.zip
md5sum == coming soon
[size=+1]Other Notes[/size]
* If you want to root, use Magisk and just flash in TWRP immediately after flashing the newest Oreo build. The latest build now fully passes SafetyNet and shows the device as being Certified in the Play Store.
* If you're already on the previous Oreo build (OPJ28.108 - November Security Patch), you can easily update to the latest Oreo build (OPJ28.111-12 - December Security Patch) by dirty flashing. If you want to keep root, you'll still need to flash Magisk again after flashing the newer build.
* To root the Nougat build(s), you will need to flash a custom kernel, then flash Magisk (same as before).
[size=+2]XDA:DevDB Information[/size]
[size=+1]TWRP Flashable Stock Builds, ROM for the Moto G4/G4 Plus[/size]
Contributors
@Jleeblanch, @rajatgupta1998, Motorola Mobility LLC
ROM OS Version: Android Oreo 8.1.0 - December 1st Security Patch
ROM Kernel: v3.10.84
Version Information:
Status: Beta
Created: 2018-11-26
Last Updated: 2019-01-09

**Reserved**

Coming from Pixel Experience 9.0 rom, wiped and installed. Working great so far. I hope we see an official rom soon.

zerocoolriddler said:
Coming from Pixel Experience 9.0 rom, wiped and installed. Working great so far. I hope we see an official rom soon.
Click to expand...
Click to collapse
these ROM have the same problems with camera like a soak test bulid?
all wipes needed to install these ROM?

vlrgamaley said:
these ROM have the same problems with camera like a soak test bulid?
Click to expand...
Click to collapse
This IS the Moto Soak test build. I've just made it TWRP flashable and safer for everyone to use. But yes, to answer your question, the issue with the Camera and Flashlight tile taking a few (5 or more) seconds to open is present here. There isn't anything I can do about that, however when Moto releases a future OTA update and have fixed the issue, I will make a new zip and post it here.
I will also make a nougat build of NPJS25.93-14-18 that is TWRP flashable as well for anyone who would like to be on stock nougat or easily revert back to stock nougat.

Thanks for your Hard Work.

Jleeblanch said:
ROM OS Version: Android Oreo 8.1.0 - November 1st Security Patch
ROM Kernel: v3.10.84
Click to expand...
Click to collapse
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?

Thanks, I guess I won't be bored until I decide to unlock my G6 Plus

Jleeblanch said:
[size=+1]TWRP Flashable Stock builds for the Moto G4/G4 Plus[/size]
As you all know, Moto has finally released the first Oreo soak test for select users to test. Thanks to @rajatgupta1998, we all get to try it out
About this build
What is different about this versus what's already available? Basically what I have done is taken the previous 7.0 (nougat) firmware and directly patched it using the 8.1.0 (oreo) OTA zip from this thread. In an effort to make this build safer for everyone to use, I have left out any bootloader related items which is what can potentially prevent you from being able to downgrade. If this had been an official release, I would also have removed dm-verity (and forced encryption) as needed also. But being this is a test build from Moto, they have yet to enable such features. Now, on to the good stuff.
Requirements
-> Unlocked bootloader
-> TWRP Recovery Installed (or booted)
-> You may or may not need to be on stock nougat prior, need confirmation on this
Installation
-> Download the TWRP Flashable zip (Links below)
-> Place zip on device (internal storage or external)
-> Reboot to TWRP (or boot it)
-> Flash zip && Profit
Downloads
Oreo 8.1.0 Soak Test (November 1st Security Patch)
AFH - TWRP-athene-OPJ28.108.zip
G-Drive - TWRP-athene-OPJ28.108.zip
md5sum = c995bcb22215346e362195447de686f8
Other Notes
Currently as mentioned in the other thread, the build doesn't fully pass SafetyNet as it's a test release. You can use Magisk modules to fix this if needed.
You can also easily root by flashing Magisk immediately after the TWRP zip or any time afterwards.
[size=+2]XDA:DevDB Information[/size]
[size=+1]TWRP Flashable Stock Builds, ROM for the Moto G4/G4 Plus[/size]
Contributors
@Jleeblanch, @rajatgupta1998, Motorola Mobility LLC
ROM OS Version: Android Oreo 8.1.0 - November 1st Security Patch
ROM Kernel: v3.10.84
Version Information:
Status: Beta
Created: 2018-11-26
Last Updated: 2018-11-26
Click to expand...
Click to collapse
Thanx your .zip fixed the sim issues . Thanx mate

Jleeblanch said:
This IS the Moto Soak test build. I've just made it TWRP flashable and safer for everyone to use. But yes, to answer your question, the issue with the Camera and Flashlight tile taking a few (5 or more) seconds to open is present here. There isn't anything I can do about that, however when Moto releases a future OTA update and have fixed the issue, I will make a new zip and post it here.
I will also make a nougat build of NPJS25.93-14-18 that is TWRP flashable as well for anyone who would like to be on stock nougat or easily revert back to stock nougat.
Click to expand...
Click to collapse
Waiting for the Nougat build! Really need to go back to stock. Thank you for your work!

Awesome work dont stop keep up the good work

I`ve had previously RR 5.8 (Nougat 7.1, no custom kernels) and try install your ROM (without wipes, like you describe in instruction). Result? Bootloop. I have Moto 2g RAM/16 Gb Flash, install through rajatgupta recovery v 3.2.1-r3. Try now with wipes, but i don`t have confidence for good result.
try again with wipes, works normally. woah

jer194 said:
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Click to expand...
Click to collapse
I doubt any of the stock kernels currently available would work as they're intended for nougat (7.0).
corlatemanuel said:
Thanks, I guess I won't be bored until I decide to unlock my G6 Plus
Click to expand...
Click to collapse
Fair enough. I'm surprised you haven't unlocked the bootloader yet, LineageOS is pretty good for the G6+ and also is used as a base ROM for flashing GSI's. I'll be making a stock based custom kernel (and one for the custom rom's/GSI's soon too).
DanFaraday777 said:
Waiting for the Nougat build! Really need to go back to stock. Thank you for your work!
Click to expand...
Click to collapse
I gotta finish up some TWRP flashable builds for the Moto G6 and then I'll upload the one I made for nougat when I upload those [emoji41]

luv u
thanks a lot

Thanks for zip :good:

What do you mean by "Stock nougat prior"?
Sorry for the dump question

Henry Markle said:
What do you mean by "Stock nougat prior"?
Sorry for the dump question
Click to expand...
Click to collapse
I mean the latest stock nougat build NPJS25.93-14-18

jer194 said:
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Click to expand...
Click to collapse
To expand on Jleeblanch's reply, you may have to wait for Motorola to release the Oreo kernel source code, so developers can work on improving the kernel. Best thing to do is to check the Motorola Mobility GitHub page every so often, where you may see a request for the Oreo source code for our device appear https://github.com/MotorolaMobilityLLC/kernel-msm/issues Once there's a request made, Motorola should release the code when it's ready for release and then pave the way for custom Oreo kernels

echo92 said:
To expand on Jleeblanch's reply, you may have to wait for Motorola to release the Oreo kernel source code, so developers can work on improving the kernel. Best thing to do is to check the Motorola Mobility GitHub page every so often, where you may see a request for the Oreo source code for our device appear https://github.com/MotorolaMobilityLLC/kernel-msm/issues Once there's a request made, Motorola should release the code when it's ready for release and then pave the way for custom Oreo kernels
Click to expand...
Click to collapse
I would make the request myself, same as I've done for other devices (currently have a request up for beckham) but being that this is supposed to be a private soak test, not sure if they'll appreciate it just yet. But best believe, when they release the official Oreo build, I'll be all over it (assuming someone doesn't beat me to it [emoji6])

Jleeblanch said:
I would make the request myself, same as I've done for other devices (currently have a request up for beckham) but being that this is supposed to be a private soak test, not sure if they're appreciate it just yet. But best believe, when they release the official Oreo build, I'll be all over it (assuming someone doesn't beat me to it [emoji6])
Click to expand...
Click to collapse
Oh yup, it'd probably be a bit soon to put in a request, and I imagine they may change the kernel source code for the final release anyway (e.g. if they update to the latest security patch). Thanks for keeping a close eye on it - exciting times ahead

TWRP 3.2.3 release 0330 for Android Pie Mi 8 Lite

I am not a developer and have no connection with this recovery but thought it would be helpful to make a new post to highlight its availability. The previously-posted versions (4pda & wzsx150) work with Oreo but not Pie. wzsx150 has released an update that works with Pie and I'll post a link to the most recent version (0330). I have installed it on my Mi 8 Lite and it works fine but accept no responsibility if it breaks yours!
https://www.mediafire.com/file/eafg...RP-3.2.3-0330-XIAOMI8LITE-CN-wzsx150.img/file

dwl99 said:
I am not a developer and have no connection with this recovery but thought it would be helpful to make a new post to highlight its availability. The previously-posted versions (4pda & wzsx150) work with Oreo but not Pie. wzsx150 has released an update that works with Pie and I'll post a link to the most recent version (0330). I have installed it on my Mi 8 Lite and it works fine but accept no responsibility if it breaks yours!
https://www.mediafire.com/file/eafg...RP-3.2.3-0330-XIAOMI8LITE-CN-wzsx150.img/file
Click to expand...
Click to collapse
Its seems to work, but touch doesnt work for me.

For me work but i can official rom beta update with twrp?

Xiaomi.eu

Hey guys,
Tempted to install the Xiaomi EU ROM as I've heard it is very good for battery and performance. I have a few questions with regards to updates however. Does xiaomi.eu support OTA updates after the first flash, does it support major software update flashes OTA without the need to wipe data, and does it work with custom recoveries? I have orangeFox downloaded right now but I can change to TWRP.
Thanks
EDIT: Just flashed Lineage, then Arrow, then dotOS, prefer Dot out of the 3, great ROM would reccomend.

fizzy900 said:
Hey guys,
Tempted to install the Xiaomi EU ROM as I've heard it is very good for battery and performance. I have a few questions with regards to updates however. Does xiaomi.eu support OTA updates after the first flash, does it support major software update flashes OTA without the need to wipe data, and does it work with custom recoveries? I have orangeFox downloaded right now but I can change to TWRP.
Thanks
Click to expand...
Click to collapse
Coming from F2 Pro EU ROM it wasn't OTA updates, you needed to manually download and flash via TWRP. That could be different with OrangeFox as we only had TWRP on F2. Even when flashing manually you didn't need to wipe even when going from A10 to A11 as long as you kept on Stable route or the weekly route (I went stable)

I'm tempted by this device since mi-globe ROM is since ca. a week also available. It is based on xiaomi.eu Builds but you can customize the build by removing a bunch of MIUI apps (BugReport, Browser, Weather, Email, LiveWallpaper, File-Explorer) and block the Xiaomi Sync Daemon. See mi-globe FAQ.
I would be interested on any reports and feedbacks of xiaomi.eu or mi-globe users on this device compared to the Stock ROM , I'm particularly interested in the Cam performance (Stock ANX and/or GCam builds).

benfleet5 said:
Coming from F2 Pro EU ROM it wasn't OTA updates, you needed to manually download and flash via TWRP. That could be different with OrangeFox as we only had TWRP on F2. Even when flashing manually you didn't need to wipe even when going from A10 to A11 as long as you kept on Stable route or the weekly route (I went stable)
Click to expand...
Click to collapse
Hey, I just remembered I posted this lol. You're right, you can dirty flash over your existing build, but I went for DotOS after all haha

ChriMo said:
I'm tempted by this device since mi-globe ROM is since ca. a week also available. It is based on xiaomi.eu Builds but you can customize the build by removing a bunch of MIUI apps (BugReport, Browser, Weather, Email, LiveWallpaper, File-Explorer) and block the Xiaomi Sync Daemon. See mi-globe FAQ.
I would be interested on any reports and feedbacks of xiaomi.eu or mi-globe users on this device compared to the Stock ROM , I'm particularly interested in the Cam performance (Stock ANX and/or GCam builds).
Click to expand...
Click to collapse
Hey, I know its not Xiaomi EU but I found DotOS and ArrowOS to be miles better than MIUI, the camera performance isn't great with the pre-installed cam on both ROMs but with GCam PX it's actually very very good!

fizzy900 said:
Hey, I know its not Xiaomi EU but I found DotOS and ArrowOS to be miles better than MIUI, the camera performance isn't great with the pre-installed cam on both ROMs but with GCam PX it's actually very very good!
Click to expand...
Click to collapse
Thx, I also prefer clean fast CustomROMs over Stock in general, but thaught that at this stage gauguin has not yet such stable daily driver cROMs and until that I would go with xiaomi.eu/mi-globe - without at least those I would not buy a Xiaomi device.
For Custom ROMs I prefer those with Signature Spoofing Support and particularly like crDroid. If I order this device (depends if RN10 Pro does not become more interesting soon) I guess I have to try out by myself Nice to see the community growing here.
EDIT: Redmi Note 10 Pro Max is rumored to have Snapdragon 768G, Amoled, 108 Mpx - so definitely will wait if it gets that and will be availanle at a price point under Mi 10T Lite and will soon get Custom ROMs.

fizzy900 said:
Hey, I know its not Xiaomi EU ...
Click to expand...
Click to collapse
Has anybody tested Miracast (screen mirror) on Stock/xiaomi.eu or Custom ROMs? Seems to be present in LOS 14.1 but not in crDroid 6.x

Update firmware with LineageOS

Hello, I was wondering if I need to update my firmware on my Xiaomi Redmi Note 5 Pro (whyred).
The reason for it is because it shows "1. November 2018" as latest vendor security patch level.
I am currently running LineageOS 17.1 which is based on Android 10 together with the Lineage recovery.
Mainly I have these questions:
1. Do I need to update the vendor firmware? In other words would that even increase the Vendor security patch level?
2. When I checked this website: https://xiaomifirmwareupdater.com/firmware/whyred/ it shows the latest Vendor Firmware to be from 2021, however with Android 9.0, would that even work with LineageOS 17.1 which is Android 10 level?
3. Would I need to flash back to the official Rom on Android 9.0 in order to then flash to the 2021 firmware ( should be included in the latest official rom anyway) and then flash back to LineageOS 17.1?
Any help is greatly appreciated as this is my first phone on LineageOS. (I did had a couple of other phones in the past with unofficial Roms so I am not a completely noob.)
Thanks and have a good day

StriKe_jk said:
Hello, I was wondering if I need to update my firmware on my Xiaomi Redmi Note 5 Pro (whyred).
The reason for it is because it shows "1. November 2018" as latest vendor security patch level.
I am currently running LineageOS 17.1 which is based on Android 10 together with the Lineage recovery.
Mainly I have these questions:
1. Do I need to update the vendor firmware? In other words would that even increase the Vendor security patch level?
2. When I checked this website: https://xiaomifirmwareupdater.com/firmware/whyred/ it shows the latest Vendor Firmware to be from 2021, however with Android 9.0, would that even work with LineageOS 17.1 which is Android 10 level?
3. Would I need to flash back to the official Rom on Android 9.0 in order to then flash to the 2021 firmware ( should be included in the latest official rom anyway) and then flash back to LineageOS 17.1?
Any help is greatly appreciated as this is my first phone on LineageOS. (I did had a couple of other phones in the past with unofficial Roms so I am not a completely noob.)
Thanks and have a good day
Click to expand...
Click to collapse
LOS has old version of vendors. Yes from 2018.. they build on that... if you wanna updated version go to LOS github and ask there.. that's how it is, nothing can be done here. Only LOS team can help you.
Good luck and stay safe!

drnightshadow said:
LOS has old version of vendors. Yes from 2018.. they build on that... if you wanna updated version go to LOS github and ask there.. that's how it is, nothing can be done here. Only LOS team can help you.
Good luck and stay safe!
Click to expand...
Click to collapse
Does this mean 2018 is the latest vendor security patch level?

StriKe_jk said:
Does this mean 2018 is the latest vendor security patch level?
Click to expand...
Click to collapse
If you use LOS, than yes.

Maybe I am a bit dense to understand this, but shouldn't all have the same? I thought Vendor security patch level are bugfixes from the vendor, so it only makes sense to me to include the latest patches in all roms to get this baseline patch level. Ofc every ROM can feel free to increase security even further with additional patches on top of that.

StriKe_jk said:
Maybe I am a bit dense to understand this, but shouldn't all have the same? I thought Vendor security patch level are bugfixes from the vendor, so it only makes sense to me to include the latest patches in all roms to get this baseline patch level. Ofc every ROM can feel free to increase security even further with additional patches on top of that.
Click to expand...
Click to collapse
Yap, but every custom Rom has it's own vendor version. LOS has old one and many custom ROMs. It's actually developer decision what version he's gonna use to build rom. That's it. Yes MIUI ROM uses latest. You can't mix them because you'll get bootloop or bricked device.
For latest version you need to ask developer to update it.

StriKe_jk said:
1. Do I need to update the vendor firmware? In other words would that even increase the Vendor security patch level?
Click to expand...
Click to collapse
The vendor security patch level is just a setting configured here: https://github.com/LineageOS/androi...0038ae0340b1da03ae9c00ff50/BoardConfig.mk#L56
The official LOS 18.1 rom contains at least some vendor blobs from the latest MIUI V12.0.2.0.PEIMIXM rom.
That probably means the vendor security patch level date is not accurate and can be ignored.
StriKe_jk said:
2. When I checked this website: https://xiaomifirmwareupdater.com/firmware/whyred/ it shows the latest Vendor Firmware to be from 2021, however with Android 9.0, would that even work with LineageOS 17.1 which is Android 10 level?
Click to expand...
Click to collapse
Yes, it works. Considering you are currently using even older firmware.
StriKe_jk said:
3. Would I need to flash back to the official Rom on Android 9.0 in order to then flash to the 2021 firmware ( should be included in the latest official rom anyway) and then flash back to LineageOS 17.1?
Click to expand...
Click to collapse
You can flash the firmware ZIP from https://xiaomifirmwareupdater.com/firmware/whyred/. It only updates the various firmware partitions without touching the "boot", "system" and "vendor" partitions (on which LOS is installed).
For some reason the firmware ZIP is missing the new boot logo. It can be updated manually by extracting the file "/firmware-update/splash.img" from the latest MIUI Rom and flashing it in Fastboot Mode with
Code:
fastboot flash splash splash.img

I'm on Lineage OS 18.1 now with Android 11 and figured I just leave it as is. But thanks all for the help

Development Derpfest A13 for OnePlus 9 Pro (Unofficial) (c66FW)

Derpfest A13 (Tango) for the OnePlus 9 Pro.
Unofficial for now, will apply for official momentarily.
Just Posting links for now, Thread will be properly formed and Cleaned Up Later this Weekend.
Requirements : C66 FW
Known Info
Uses ZPOS and Oss display Stack, so probably third party kernels won't be supported for now, if you change the
Possible issues will be caused like broken FOD./UDFPS.
Enforcing Build.
System/ROM works just fine .
Jan security patch QPR build.
Don't panic if first boot acts weird.
Todo: Cleanup Thread
Remove some more oplus ****s
Flashing Instr: Same like any Roms.
flash boot, vendor_boot and dtbo and sideload/ Flash with TWRP.
C66 FW: https://t.me/area51lemonade/452
Download here :
DerpFest-13-Initial_Build-OnePlus9Pro.zip
drive.google.com
Report and feedback can be done at TG group
Provided : https://t.me/area51lemonade
Kernel source : https://github.com/LineageOS/android_kernel_oneplus_sm8350
Rom source :
DerpFest AOSP
"German Engineering". DerpFest AOSP has 188 repositories available. Follow their code on GitHub.
github.com

Update 2:
Standy Issue Solved (kinda, its like hit or miss now)
Sepolicy Cleaned up a bit
User build
January SP
Improved Haptics Implementation (oos like).
here are few of the builds which might be worth trying, also includes initial build.
idk which build to be specific but one of it has everything working and less display crashes and fully working oos cam
Im having my exams starting Friday, so i wont be doing AOSP for some while.
thanks and here are the links
Release - Google Drive
drive.google.com

Res

Res

Thank you friend.

Very nice. Hopefully DerpFest official for our OP9P very soon. Thank you

C.66 firmware is included in rom ?

ElitePotato said:
C.66 firmware is included in rom ?
Click to expand...
Click to collapse
no, you have to flash the FW or flash some roms which already includes them like Xtended.

Sherif Rahim said:
Derpfest A13 (Tango) for the OnePlus 9 Pro.
Unofficial for now, will apply for official momentarily.
Just Posting links for now, Thread will be properly formed and Cleaned Up Later this Weekend.
Requirements : C66 FW
Known Info : Oos Cam - Only Photo Mode works, rest all are Broken.
Userdebug Build for now, next on it will be user release type.
Uses ZPOS and Oss display Stack, so probably third party kernels won't be supported for now.
Possible issues will be caused like broken FOD./UDFPS.
Enforcing Build.
System/ROM works just fine .
December security patch QPR build.
Don't panic if first boot takes some time, give it some time.
Expect the Next build on or before 15th Jan.
Todo: Cleanup Thread
Remove some more oplus ****s
shift to user build
Merge oplus camera fully
Add Dolby
And some other under the hood improvements planned.
Download here :
DerpFest-13-Initial_Build-OnePlus9Pro.zip
drive.google.com
Report and feedback can be done at TG group
Provided : https://t.me/area51lemonade
Kernel source : https://github.com/LineageOS/android_kernel_oneplus_sm8350
Rom source :
DerpFest AOSP
"German Engineering". DerpFest AOSP has 188 repositories available. Follow their code on GitHub.
github.com
Click to expand...
Click to collapse
Amazing work i like Derpfest so much! Hope you keep update

Sherif Rahim said:
no, you have to flash the FW or flash some roms which already includes them like Xtended.
Click to expand...
Click to collapse
Are you sure it is included in Xtended ? There is a separate C.66 firmware flasher on sourceforge. Can I just flash C.66 firmware over OOS13 and flash rom ?

ElitePotato said:
Are you sure it is included in Xtended ? There is a separate C.66 firmware flasher on sourceforge. Can I just flash C.66 firmware over OOS13 and flash rom ?
Click to expand...
Click to collapse
not adviced

phone is not waking up from standby

habobababo said:
phone is not waking up from standby
Click to expand...
Click to collapse
Could you maybe grab logs?

Sherif Rahim said:
Could you maybe grab logs?
Click to expand...
Click to collapse
here you go.

I don't see any flashing instructions. So my guess is just use los recovery and flash?

NameIsOptional said:
I don't see any flashing instructions. So my guess is just use los recovery and flash?
Click to expand...
Click to collapse
Yes but you need C.66 firmware which you can find in xtended rom instructions.

NameIsOptional said:
I don't see any flashing instructions. So my guess is just use los recovery and flash?
Click to expand...
Click to collapse
will cleanup and organise the thread this weekend

Does someone got problems with standby?

habobababo said:
Does someone got problems with standby?
Click to expand...
Click to collapse
yes its an known issue, will work on the rom this weekend

Standy Issue Solved
Sepolicy Cleaned up a bit
User build
January SP
Improved Haptics Implementation (oos like)
More Camera modes on Ooscam is now there, but i wasnt able to figure out Video mode.
Also Let me know if Alert Slider was working for everyone?, Because rn its ded .
Lmk