Related
Hi,if u like V4A audio efect.ill share how u can use V4A in AEX rom.
First,u must rooted and install busybox.
-Ok if u done upper step,lets boot your zuk z2 into twrp
flash v4a4.2.zip(V4A 4.2) and reboot system.
-Now launch V4A,install driver and reboot
Ok,now its time to update latest V4A version 2.5.0.5
-Install RootExplorer (optional) or u can use twrp file manager to delete V4A 4.2 apk in system.
-Flash V4A 2.5 in twrp and u done.
Optional you can delete apk in system or disable MusicFx.
thank you, but i didn't find or couldn't do the delete part with root explorer or twrp, but it worked anyhow.
raketman said:
thank you, but i didn't find or couldn't do the delete part with root explorer or twrp, but it worked anyhow.
Click to expand...
Click to collapse
If you using root explorer try find viper4android 4.2 folder in root/system/priv-app.
Thank you for your information. I have got much easier way to use it(if you have magisk installed). First install the viper4android zip using twrp. Reboot. Then open mgix go to download and select viper4android. Just tap on the arrow and tap on install. After installing it will ask your permission to reboot. Just reboot your device and enjoy. Sounds tricky but process is as simple as water.
I flashed ARISE and it worked normally. But as for sound quality...meh
n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
I don't think sound quality would still be lacking after you installed ARISE. Do share your setup (pm me, this isn't the correct thread) so we could get to the bottom of your issue.
Sorry for OT!
n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
Im just done with arise before..still nid v4a 2.5.0.4 driver. U have seen driver 2.5.0.5?nope,there only 2.5.0.4 driver.v4arise is modded apk and not original one.
arch_geek said:
I don't think sound quality would still be lacking after you installed ARISE. Do share your setup (pm me, this isn't the correct thread) so we could get to the bottom of your issue.
Sorry for OT!
Click to expand...
Click to collapse
zakwanPHG said:
Im just done with arise before..still nid v4a 2.5.0.4 driver. U have seen driver 2.5.0.5?nope,there only 2.5.0.4 driver.v4arise is modded apk and not original one.
Click to expand...
Click to collapse
If the hardware is ****e any kind of software is not going to make it good. It's not magic.
does it work on aex 5.1 ,( the january update)?
Haha, very timely post. I was trying to get Viper for the first time on Oreo two days ago.
One question, are apps other than music players processed by Viper as well? I ask because I installed Arise but emulators and games didn't get audio processing, only my music players.
Thanks!
I'm getting driver install failed error I/o while setting up v4a on Validus 8.1
I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?
Hey I was wondering if viper is working on Oreo or not.
Ronnie2017 said:
I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?
Click to expand...
Click to collapse
Same on AEX v5.1
Ronnie2017 said:
I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?
Click to expand...
Click to collapse
I'm having same error
I'm on bootleggers ROM March build 8.1 Oreo
Pls help
I finally installed it via magisk
And it's working
Pls suggest some settings to get max phone speaker volume
Stuck on booting
n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
After flashing arise+magnum opus phone stuck in booting.it takes half an hour & nothing happen..
help me
Hey guys which dolby atmos version should i flash, which uses all hardware capability of oneplus 3. Also im on latest stable Oxygen OS.
wahabisbest said:
Hey guys which dolby atmos version should i flash, which uses all hardware capability of oneplus 3. Also im on latest stable Oxygen OS.
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 Using this on my OP3 seems to work fine had no issues with it
How's the sound while using it.
Flashed arise but it didn't show up in app drawer
i tried installing arise mod i flashed it with no error but it didn't show up in app drawer what to do..
Hi guys,
I just tested several Sound Mods for Android. So I want to share my best settings for the HTC U11 + U sonic Earphones with you.
Working on:
Stock based ROM (8.0 based)
LOS based ROM (8.1 based)
Install Viper4Android via MagiskManager (Get it from here or directly under Downloads in Magisk, I am using Viper4Android 2.6.0.4 with the new Material Design)
Reboot
Install the AINUR Audio Mod (Get it from here or install it directly through Magisk Manager -> Downloads -> Ainur Sauron.)
Reboot
Install AML(Audio Modification Library) via Magisk or flash it from here
Reboot
Open Viper4Android. Driver Status should be working now. If not dirty Flash your ROM and start again at 1.
Load my HTC U11 Profile that I attached to this post. When using Viper4Android FX greater or equal to version 1.6 than use the v2 Profile. Everything lower than Viper4Android FX 1.6 just use the v1 Profile. Unzip the attached File to the Viper4Android Folder at the Internal Storage of your Device. Dont forget to load the Profile in V4A.
Hope you are enjoing this as much as I do. If you got any recommendations or suggestions let me know.
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Zimty86 said:
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Click to expand...
Click to collapse
Great that yours also working .
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
xx00xx1990 said:
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
Click to expand...
Click to collapse
Did you already installed another soundmod? This happened to me after I flashed ARISE. Only a full wipe helped me out. I am also using Leedroid R124.
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
xx00xx1990 said:
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
Click to expand...
Click to collapse
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Malle355 said:
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Click to expand...
Click to collapse
I saw in Leedroid thread that you have to change a line in arise_parameters1.prop , to avoid bootloops
After flashed as your instructions, everything works like a charm bur only ANC not work anymore
I finally got it to work, but sound quality is not as good as on Dolby Atmos Nougat, I think I will stick to V4A + usb dongle boost mod till dolby is updated
Will just the viper4Android work and give good sound quality
Sent from my 2PZC5 using XDA Free mobile app
Actual Dolby can't work while V4A works, at least with me, I have to disable one of them so the other work, but anyway actual dolby on oreo is not good as audio quality, it was way better on Nougat
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
schmeggy929 said:
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
Click to expand...
Click to collapse
I can use Ahrion's version, but it has to be the v1.5.2/2.5.0.5 version. I've never been able to get any 2.3.4.0 versions to work on Oreo, due to the driver not being able to install.
Anybody get Dolby to install? I'm getting Api error
Should we install Unity or standard version from the official thread?
vegetaleb said:
Should we install Unity or standard version from the official thread?
Click to expand...
Click to collapse
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
I must reckon the new Dolby port on Oreo is pretty good, I am using dynamic selection to boost both surround and bass. Always be sure to have Dolby surround mode On (green icon)
bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
How did u get Dolby to run? Mine opens up and close right away. I'm on ledroids rom.
Can anyone get the profile to work on updated viper on Magisk. I can see it in my profiles but can't get it to take
Hi i have i tried dolby atmos mods in app section but all went bootlooped im using AOSiP 8.1. any dolby atmos mod working for this device? Im a fan of dolby atmos i hope someone can help or i'm willing to try any sound mod the have the same quality as dolby atmos thanks!
I have dolby atmos and Viper4android working on RR 8.1 - The only way that works for me was trying to intall the "Arise mod audio", but you have to modify the script in order to tell what is going to be installed in the device.
alexaander said:
I have dolby atmos and Viper4android working on RR 8.1 - The only way that works for me was trying to intall the "Arise mod audio", but you have to modify the script in order to tell what is going to be installed in the device.
Click to expand...
Click to collapse
Guide please? Thanks!
t0per666 said:
Guide please? Thanks!
Click to expand...
Click to collapse
Have you tried the ported versions from Magisk?
attitude12 said:
Have you tried the ported versions from Magisk?
Click to expand...
Click to collapse
Link please. Thanks!
Up?
I used the attached file through magisk (you cannot flash in twrp). Enjoy!
Just want to sharing some alternative to making our D6603 sounds boom... and seems can implement to other phone because all of components that i have installed are universal (wish work on all phone other than D6603), just try it but don't blame me
After fighting about 2 weeks to getting DOLBY (effect) including VIPER4 in my D6603 with latest CARBON Rom, finally i found an alternative for that.
Because when i try to install Dolby Atmos (standard/unity) always "unsuccessful", installed but no app in drawer that made me headache
My phone configuration :
- Magisk 17.1 + init.d injector
- SELinux permissive.
- AML and ACP installed. Get in here (for supersu seems AML modul not necessary because the installer will search magisk directory, so you just need ACP modul)
- Viper4 FX from here
- DOLBY DIGITAL PLUS for 8.x (i found in somewhere at XDA, thanks already make it work on OREO :good: really appreciate it)
Step: i am installing all components below via TWRP (you can try with your own way)
1. DDP.
2. VIPER4FX. (to escape from Viper4 FX asking the driver installing repeatedly, please install it after DDP or other sound mod.)
3. ACP (additional).
4. AML (essential), better doing at last because will detect and patching audio module on DDP and VIPER4 for compatibility.
On each step i do reboot then back again to TWRP (only want to making sure the components already installed).
When all done let try boot to system and open Viper4 (check the driver is installed or no), next playing the music, the lasting is open DDP to getting more bass. ENJOYING your music.
Noted: for compatibility reason i remove musicfx/audiofx from system. please do backup first.
Results :
- Phone speaker, WORK.
- Headset, WORK.
- Bluetooth speaker, WORK.
- Jack 3.5, WORK.
Playing music via Spotify and internal player all work.
If it work on different Phone than OP, please report back. Would be appreciate it.
Thanks to
- @Myself5 for Carbon Rom
- @guitardedhero @worstenbrood for DOLBY DIGITAL PLUS 8.x
- @nailyk for the TWRP
- @ahrion @Zackptg5 for Viper4 FX AML ACP
- @topjohnwu for Magisk
- @matt1313 that already provide DDP installer for 8.x
Work like a charm
Thank you
Can I somehow only get the Dolby?
RaySupreme said:
Can I somehow only get the Dolby?
Click to expand...
Click to collapse
Yes, you can.
Simply flashing the package right? No need of anything else
RaySupreme said:
Simply flashing the package right? No need of anything else
Click to expand...
Click to collapse
Correct. Just flashing all packages, and i suggest you to install Viper4 at the end (if you prefer)
If SELinux is enforcing this won't work?
vinoxflame said:
If SELinux is enforcing this won't work?
Click to expand...
Click to collapse
DDP need permissive mode, will set by dolby.sh in init.d
If your rom doesn't have init.d but you use Magisk, just copy dolby.sh to /sbin/.core/img/.core/ service.d or post-fs-data.d
Viper4 can work on enforcing mode.
alfan.y said:
DDP need permissive mode, will set by dolby.sh in init.d
If your rom doesn't have init.d but you use Magisk, just copy dolby.sh to /sbin/.core/img/.core/ service.d or post-fs-data.d
Viper4 work on enforcing mode.
Click to expand...
Click to collapse
Will this work on S7 Oreo supersu root?
COOL
slimcyril said:
Will this work on S7 Oreo supersu root?
Click to expand...
Click to collapse
Why not try it and report back
For supersu i think you just need DDP, ACP, VIPER4 and making sure your init.d and permissive are work.
Those modules can install on Magisk or System.
alexaander said:
COOL
Click to expand...
Click to collapse
it's work for you?
alfan.y said:
Why not try it and report back
For supersu i think you just need DDP, ACP, VIPER4 and making sure your init.d and permissive are work.
Those modules can install on Magisk or System.
Click to expand...
Click to collapse
Didn't work on stock S7 supersu root
slimcyril said:
Didn't work on stock S7 supersu root
Click to expand...
Click to collapse
For dolby or Viper4 that don't work? Have you set permissive mode for dolby?
alfan.y said:
For dolby or Viper4 that don't work? Have you set permissive mode for dolby?
Click to expand...
Click to collapse
Yes & was permissive, viper works but Dolby force closes
slimcyril said:
Yes & was permissive, viper works but Dolby force closes
Click to expand...
Click to collapse
your init.d work, right? Because i just try installed DDP only on 5.x firmware with supersu and work :good:. How about /system/su.d any issue or no?
In my opinion, this DPP actually can running on 5.x-8.x firmware with supersu/magisk. See this video to confirm on 5.x ...sorry, no idea probably the issue came from stock rom.
alfan.y said:
your init.d work, right? Because i just try installed DDP only on 5.x firmware with supersu and work :good:. How about /system/su.d any issue or no?
In my opinion, this DPP actually can running on 5.x-8.x firmware with supersu/magisk. See this video to confirm on 5.x ...sorry, no idea probably the issue came from stock rom.
Click to expand...
Click to collapse
DDP doesn't work on all 8.x firmware & works on older android, it might work for you but not everyone, thus it was said in Arise thread that DDP won't work on all 8.x, init.d & su.d works here.
Im using redmi 4x with latest aex oreo rom
- works on speaker
- DDP crashes sometimes
- when using headset both DDP and Viper doesnt works on spotify and music player, but in youtube or other video player it works well.
Maybe you can help me fixing this problems, thanks