[HELP][EML-L09] Data partition corrupted. Failed to mount \odm and \vendor - Huawei P20 Guides, News, & Discussion

Hi guys, sorry for my bad english...
I have installed an update in my eml-l09c432, as always using hurupdater 0.4. The recovery told me that this firmware may relock the bootloader. Anyway i continued. But, ad the end of the installation, a red text has appared: Failed to mount \vendor and \odm. So i rebooted the twrp again (reflashing it) and i tried to install an older sistem. But it locked with a text: Unable to mount \data. I tried to wipe all partitions (data too) but without success... Now I really don't know what to do...
Please help me
Thank you

EnricoOrlando said:
Hi guys, sorry for my bad english...
I have installed an update in my eml-l09c432, as always using hurupdater 0.4. The recovery told me that this firmware may relock the bootloader. Anyway i continued. But, ad the end of the installation, a red text has appared: Failed to mount \vendor and \odm. So i rebooted the twrp again (reflashing it) and i tried to install an older sistem. But it locked with a text: Unable to mount \data. I tried to wipe all partitions (data too) but without success... Now I really don't know what to do...
Please help me
Thank you
Click to expand...
Click to collapse
Try to download software using erecovery

madoxx77 said:
Try to download software using erecovery
Click to expand...
Click to collapse
It Is impossible. The erecovery does not exist because the os Is not installed

EnricoOrlando said:
It Is impossible. The erecovery does not exist because the os Is not installed
Click to expand...
Click to collapse
Can you access Twrp?

madoxx77 said:
Can you access Twrp?
Click to expand...
Click to collapse
No more... Now the display is full black. There is not any recovery. But if i connect it to computer, adb recognize it as a fastboot device. I tried to flash kernel, cust, system, recovery_ramdisk. There aren't errors, but it is still black

EnricoOrlando said:
Hi guys, sorry for my bad english...
I have installed an update in my eml-l09c432, as always using hurupdater 0.4. The recovery told me that this firmware may relock the bootloader. Anyway i continued.
Click to expand...
Click to collapse
On which were you and which did you install?
EnricoOrlando said:
But, ad the end of the installation, a red text has appared: Failed to mount \vendor and \odm.
Click to expand...
Click to collapse
Maybe not a problem.
EnricoOrlando said:
So i rebooted the twrp again (reflashing it) and i tried to install an older sistem.
Click to expand...
Click to collapse
Here the downgrade problems are coming...
EnricoOrlando said:
But it locked with a text: Unable to mount \data.
Click to expand...
Click to collapse
Not a problem.
EnricoOrlando said:
I tried to wipe all partitions (data too) but without success...
Click to expand...
Click to collapse
In twrp, i guess : that move was dumb...
EnricoOrlando said:
Now I really don't know what to do...
Please help me
Thank you
Click to expand...
Click to collapse
---------- Post added at 16:33 ---------- Previous post was at 16:31 ----------
EnricoOrlando said:
No more... Know the display is full black. There is not any recovery. But if i connect it to computer, adb recognize it as a fastboot device. I tried to flash kernel, cust, system, recovery_ramdisk. There aren't errors, but it is still black
Click to expand...
Click to collapse
Try hisuite restore option.

oslo83 said:
On which were you and which did you install?
Maybe not a problem.
Here the downgrade problems are coming...
Not a problem.
In twrp, i guess : that move was dumb...
---------- Post added at 16:33 ---------- Previous post was at 16:31 ----------
Try hisuite restore option.
Click to expand...
Click to collapse
I was installing eml-l09c432b160 firmware in twrp using HuRupdater v0.4
I tried to use HiSuite, but it said me that the phone isn't compatible

have you already tried the e-recovery method? Or do you have there also a black screen?

S2kT68m said:
have you already tried the e-recovery method? Or do you have there also a black screen?
Click to expand...
Click to collapse
I Always have black screen... Also fastboot isn't working. Or Better, It works for the computer, but the screen Is off. And now the led Is Red and Is flashing

Download eml-l09 firmware at androidhost .ru /search.html (sorry I can't post links), put the dload folder in an ext formatted usb, delete the eml-l29 folder and then boot your phone with the volume buttons both pressed, let me know if it works

hydrosh said:
Download eml-l09 firmware at androidhost .ru /search.html (sorry I can't post links), put the dload folder in an ext formatted usb, delete the eml-l29 folder and then boot your phone with the volume buttons both pressed, let me know if it works
Click to expand...
Click to collapse
I took my to assistance.. now i have to wait for two weeks. Anyway, thank you very much

Related

HTC One X : The Disaster Fix

Hye XDAs members..I want to share my experience with you..
I have been through with a lot of trouble since I made something, kinda stupid with my phone..
The 'disaster', than I mention on the title is, when:
1. I have made full wipe
2. No ROM on sdcard (forgot to place it!)
3. I can't restore my nandroid backup due to md5 mismatch error!
4. Bootloop
So with that problem, means that I can't open my sdcard to place any ROM in it. Bootloop is not a big issue here, but the real deal was I can't have the access to my sdcard. Then the trouble begin when I can't boot, and stuck on HTC boot screen.
This was what I have done, to recover my phone. Hope I can help someone out there that having the same problem as I am. I have access to fastboot, so:
1. I flash a custom recovery, in my case I chose ClockwordMod Touch Recovery:
http://forum.xda-developers.com/showthread.php?t=1594819
fastboot boot recovery-clockwork-touch-5.8.4.0-endeavoru.img
2. After that, I put in these command to made my sdcard opened:
adb devices
adb shell
echo /dev/block/mmcblk0p14 > /sys/devices/platform/fsl-tegra-udc/gadget/lun0/file
3. The sdcard was opened successfully! I copied my choice of custom ROM, which was Charmeleon v5.0.0, to the sdcard. I also copied Super Wipe script from here: http://forum.xda-developers.com/showthread.php?t=1562603
4. After that I go to fastboot, flash the kernel, and went back straight to the recovery. I flashed the Super Wipe script, and then I flashed the ROM, reboot.
5. Finally I have my phone fully functioning again!
This tutorial was done in Windows 7. I have tried this on Windows 8 but unfortunately Windows 8 failed to recognize the commands due to lack of HTC drivers support. I haven't tried it on Ubuntu, yet.
Before you make everything, make sure you have charge you battery fully!
So I hope this thread here will be able to help somebody. Finally thanks to everybody here. Have a good day mates!
Referrals:
1. http://forum.xda-developers.com/archive/index.php/t-1609660.html
2. http://forum.xda-developers.com/showthread.php?t=1609190
3. http://forum.xda-developers.com/showthread.php?t=1605720&page=3
If you thought this was usefull, please hit 'Thanks' button for me..
Why would anybody use the adb commands to copy anything to the SD card, it is already included/enabled (mount -->mount USB memory-->done) in the new recovery
muamers said:
Why would anybody use the adb commands to copy anything to the SD card, it is already included/enabled (mount -->mount USB memory-->done) in the new recovery
Click to expand...
Click to collapse
I will definitely DO THAT, if I can..in my case, I CAN'T..
That is why I wrote this, for those who can't..I don't know what is wrong with cwm, but because of that error, I have to do all of that command..
Freddy1X said:
I will definitely DO THAT, if I can..in my case, I CAN'T..
That is why I wrote this, for those who can't..I don't know what is wrong with cwm, but because of that error, I have to do all of that command..
Click to expand...
Click to collapse
What can cause that:
1. You didnt instal the latest CWM
2. You didnt mount the right thing ...
3. You have bad drivers ...
But it is most probably the first one...
Sent from my HTC One X using XDA
muamers said:
What can cause that:
1. You didnt instal the latest CWM
2. You didnt mount the right thing ...
3. You have bad drivers ...
But it is most probably the first one...
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
I have install the latest CWM..I think it was caused by the Windows 8, that didn't support HTC drivers..I tried this on my wife laptop which is powered by Windows 7, and wal-lah, the drivers installed successfully..Windows 8 Release Preview still need some final touch before it goes to the market..I love Windows 8, but have to stick with Windows 7 after this case happened to me..
I don't really care if I haven't flash the latest CMW, what I do care is about people out there who have the same problem as I am..I just wanted to help them, and myself..
muamers said:
Why would anybody use the adb commands to copy anything to the SD card, it is already included/enabled (mount -->mount USB memory-->done) in the new recovery
Click to expand...
Click to collapse
My thoughts exactly.
That supports the theory above that the incorrect CWM was installed.
The previous versions couldn't mount the USB Storage, but as of the latest CWM, you can.
While that was a cool trick, I think installing the lastest CWM recovery image would have solved a lot of these issues from the get-go
Quiksilver78 said:
My thoughts exactly.
That supports the theory above that the incorrect CWM was installed.
The previous versions couldn't mount the USB Storage, but as of the latest CWM, you can.
While that was a cool trick, I think installing the lastest CWM recovery image would have solved a lot of these issues from the get-go
Click to expand...
Click to collapse
Thanks..I will definitely try it again.. :good:
Recovery
Hello,
After the fastboot command did you then reboot into recovery?
Once in recovery, my windows XP does not see any device attached. Should I see a device attached while in recovery?
If I should, where can I get this driver? I tried installing PDA.net to get this, but still there is no device found, and so no way to use ADB.
I'm stuck because I have to send system modules after sending a boot.img, but there is no way.
Edit: Ahh I fixed this by updating my CWM from 5.8.3.1 to 5.8.4.0!
md5 mismatch error
greetings...
first off i m very new (noob) in these rooting, ROMing etc of the HOX
i have a question on the mismatch error
recently i tried the JB ROM, got bootloop
then i tried to restore my backup with CWM 5.8.2.7
i got 2 backups, the stock rom and revolution hd rom
both backups return md5 mismatch error when i tried to restore
what actually gone wrong
need help... :crying:
zool80me said:
both backups return md5 mismatch error when i tried to restore
what actually gone wrong
need help... :crying:
Click to expand...
Click to collapse
You renamed them.
BenPope said:
You renamed them.
Click to expand...
Click to collapse
ooo cant renamed the folder eh?
thanks will try it now...
---------- Post added at 10:32 PM ---------- Previous post was at 10:17 PM ----------
BenPope said:
You renamed them.
Click to expand...
Click to collapse
halfway worked, manage to restore but still got the boot loop :crying:
zool80me said:
ooo cant renamed the folder eh?
thanks will try it now...
---------- Post added at 10:32 PM ---------- Previous post was at 10:17 PM ----------
halfway worked, manage to restore but still got the boot loop :crying:
Click to expand...
Click to collapse
You need to push the correct boot.IMG via fastboot before you flash the Rom that's usually cause of bootloop plus not clearing cache
sent from a powerhouse HTC one X quad core nvidia beast
grinder19 said:
You need to push the correct boot.IMG via fastboot before you flash the Rom that's usually cause of bootloop plus not clearing cache
sent from a powerhouse HTC one X quad core nvidia beast
Click to expand...
Click to collapse
will redo everthings agains, thanks
zool80me said:
ooo cant renamed the folder eh?
thanks will try it now...
---------- Post added at 10:32 PM ---------- Previous post was at 10:17 PM ----------
halfway worked, manage to restore but still got the boot loop :crying:
Click to expand...
Click to collapse
You have to flash the kernel of your ROM from bootloader..
fastboot flash boot boot.img
fastboot erase cache
Then try to restore your backup..

help rooting please

Hello any help would be much appreciated.. Looking for a link to root my mi max it's running the latest version global 8.2.01 stable if anyone could point me in the right direction I'd be well grateful... Thanks ????
I have same issue that my mi max was updated to latest Mi developer rom which is Android 7 and I have lost my root privileges, even I can not downgrade to old version that I've backed up in twrp. I can't log in to twrp and my own language was gone in latest rom, please someone help me to guide us for rootting, thanks in advance.
What ever way I try I just cannot put twrp recovery on my phone bootloaders unlocked tried 4 different ways... It's driving me crackers!!!
denny1970 said:
What ever way I try I just cannot put twrp recovery on my phone bootloaders unlocked tried 4 different ways... It's driving me crackers!!!
Click to expand...
Click to collapse
Hi, sure way for me to install recovery it`s just put your recovery image in adb folder placed preferred in main drive, in my case disk c:, rename recovery with this name to simplify operation and reboot your device to fastboot mode (pressing vol- and pwr and open a terminal windows in your pc with right click mouse and shift at same moment, write to verify device is recogniced; fastboot devices, then write; fastboot flash recovery recovery.img. At second chance you have a tool flasher that works ever for me https://forum.xda-developers.com/mi...-xiaomi-twrp-flasher-mauronofrio-win-t3405207
tinkko said:
I have same issue that my mi max was updated to latest Mi developer rom which is Android 7 and I have lost my root privileges, even I can not downgrade to old version that I've backed up in twrp. I can't log in to twrp and my own language was gone in latest rom, please someone help me to guide us for rootting, thanks in advance.
Click to expand...
Click to collapse
I've read that upgrading to the beta can re-lock your bootloader. So, first check if your bootloader is locked, and if so just unlock using the same process as before. Your Mi Account should still have unlock privileges
MikusP said:
I've read that upgrading to the beta can re-lock your bootloader. So, first check if your bootloader is locked, and if so just unlock using the same process as before. Your Mi Account should still have unlock privileges
Click to expand...
Click to collapse
Thanks, will check for it, cheers
---------- Post added at 08:04 PM ---------- Previous post was at 07:57 PM ----------
denny1970 said:
What ever way I try I just cannot put twrp recovery on my phone bootloaders unlocked tried 4 different ways... It's driving me crackers!!!
Click to expand...
Click to collapse
Try this link: I can log into TWRP and installed SuperSU but Wifi doesn't work, can't turn on, No SIM shows in status bar, in latest Mi Developer ROM, now I am going back to Android 6 version,
SubwayChamp said:
Hi, sure way for me to install recovery it`s just put your recovery image in adb folder placed preferred in main drive, in my case disk c:, rename recovery with this name to simplify operation and reboot your device to fastboot mode (pressing vol- and pwr and open a terminal windows in your pc with right click mouse and shift at same moment, write to verify device is recogniced; fastboot devices, then write; fastboot flash recovery recovery.img. At second chance you have a tool flasher that works ever for me https://forum.xda-developers.com/mi...-xiaomi-twrp-flasher-mauronofrio-win-t3405207
Click to expand...
Click to collapse
Yeah did all the above mate finds the phone and when type the other part in it just says failed to load recovery image or something like that...
denny1970 said:
Yeah did all the above mate finds the phone and when type the other part in it just says failed to load recovery image or something like that...
Click to expand...
Click to collapse
It`s your bootloader is unlocked you don`t must have any issue with this, some screenies to look at
Mine does all of your screen shots It's the last screen shoot yours looks OK mine says fail.... To load recovery image....
denny1970 said:
Mine does all of your screen shots It's the last screen shoot yours looks OK mine says fail.... To load recovery image....
Click to expand...
Click to collapse
can you upload your last screenie? did you try with tool in the link posted?
Check if your bootloader status is indeed unlocked, some rom & using miflash can let your bootloader relock again.
Use
fastboot oem device-info
in adb command to check
used the tool it works but i dont have the twrp password and wont even boot back up to normal ????
cant get off the mi logo ,,,i can get in to fast boot and flash twrp but dont seem to work ..how can i restart me phone
denny1970 said:
used the tool it works but i dont have the twrp password and wont even boot back up to normal ????
cant get off the mi logo ,,,i can get in to fast boot and flash twrp but dont seem to work ..how can i restart me phone
Click to expand...
Click to collapse
No, password is just to decrypt data, don`t worry for that, just slide and go on, if you loosed your data, do a format data to decrypt and never more twrp will ask for password
SubwayChamp said:
can you upload your last screenie? did you try with tool in the link posted?
Click to expand...
Click to collapse
i usedthe tool but hit a problem...im stuck on the mi logo after i come out of twrp the phone wont boot and i dont have the twrp password
SubwayChamp said:
No, password is just to decrypt data, don`t worry for that, just slide and go on, if you loosed your data, do a format data to decrypt and never more twrp will ask for password
Click to expand...
Click to collapse
ive done a factory wipe and format data its still on the mi logo not sure if ive killed the phone
denny1970 said:
i usedthe tool but hit a problem...im stuck on the mi logo after i come out of twrp the phone wont boot and i dont have the twrp password
Click to expand...
Click to collapse
Go to recovery again with hw keys, don`t worry for password, just xiaomi knows, it`s not relevant, when ask for just slide and go main menu, format data (only data) and mount system, then reboot normally. I don`t know if factory reset probably you delete your system, if this is so flash again rom and then supersu
SubwayChamp said:
Go to recovery again with hw keys, don`t worry for password, just xiaomi knows, it`s not relevant, when ask for just slide and go main menu, format data (only data) and mount system, then reboot normally. I don`t know if factory reset probably you delete your system, if this is so flash again rom and then supersu
Click to expand...
Click to collapse
Thanks for the reply...... I flash the original rom all sorted now thanks maybe twrp is not for me lol way to many problems for me...

Twrp in honor 7x after oreo update

Hi.. I have recently updated my honor 7x to emui 8 based on android oreo. However when I try to flash TWRP I get an error notification as 'partition length get error'. Can someone help how to install TWRP on honor 7x after update to oreo.
Ypk2020 said:
Hi.. I have recently updated my honor 7x to emui 8 based on android oreo. However when I try to flash TWRP I get an error notification as 'partition length get error'. Can someone help how to install TWRP on honor 7x after update to oreo.
Click to expand...
Click to collapse
the partions changed in oreo to flash new recovery you have to type ( fastboot flash recovery_ramdisk ) and it will work
Not working
dcraffam said:
the partions changed in oreo to flash new recovery you have to type ( fastboot flash recovery_ramdisk ) and it will work
Click to expand...
Click to collapse
Thanks for the reply. I tried adding ramdisk but doesnt work..
Ypk2020 said:
Thanks for the reply. I tried adding ramdisk but doesnt work..
Click to expand...
Click to collapse
You must do it exactly as I put it the new partion is (recovery_ramdisk) it won't work without the underscore
Not working
dcraffam said:
You must do it exactly as I put it the new partion is (recovery_ramdisk) it won't work without the underscore
Click to expand...
Click to collapse
Yess I did exactly the same.. This time I didn't even get any etror message. It said okay.. Still my phone boots normal with stock recovery..
Ypk2020 said:
Yess I did exactly the same.. This time I didn't even get any etror message. It said okay.. Still my phone boots normal with stock recovery..
Click to expand...
Click to collapse
The trick is to hold vol up and vol down plus power button if your usb is connected. Wait till it sais rebooting. If no USB connected just vol up and power.
Having same problem
allrockedout said:
The trick is to hold vol up and vol down plus power button if your usb is connected. Wait till it sais rebooting. If no USB connected just vol up and power.
Click to expand...
Click to collapse
I tried but it didn't worked
Kakshi Naresh said:
I tried but it didn't worked
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-7x/development/oreo-twrp-complete-backup-t3764500
Kakshi Naresh said:
I tried but it didn't worked
Click to expand...
Click to collapse
please add screenshots of fastboot flashing the recovery, maybe picture tells wore detail than you notice.
same problem sir....
plz help me
Can it comfortable with BND-AL10,with running official oreo
---------- Post added at 08:14 AM ---------- Previous post was at 08:02 AM ----------
Can it comfortable with BND-AL10,with running official oreo
Kakshi Naresh said:
I tried but it didn't worked
Click to expand...
Click to collapse
Kakshi Naresh said:
mrmazak said:
So you are all ok?
Click to expand...
Click to collapse
Dude I flashed twrp
But it is stucked what to do
Click to expand...
Click to collapse
stucked at logo screen?
from that page only use / try these two
imagemount.img
twrp_complete.img
but there is twrp from p10 lite that works better--- it has working encryption
abd today someone found that twrp for p20 lite also works better.
mrmazak said:
stucked at logo screen?
from that page only use / try these two
imagemount.img
twrp_complete.img
but there is twrp from p10 lite that works better--- it has working encryption
abd today someone found that twrp for p20 lite also works better.
Click to expand...
Click to collapse
Where can I find that
Kakshi Naresh said:
Where can I find that
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p20-lite/development/recovery-testing-t3783587
Not able to boot into TWRP
I have tried a dozen image files until now...
I am using honor 7x...
My software is bricked... I am trying to flash TWRP... On pc, there are no errors... But in phone, stock recovery comes up
Yeah recovery_ramdisk is working for me but can anyone tell what is the new partition name for erecovery or recovery2 earlier??
Ypk2020 said:
Yess I did exactly the same.. This time I didn't even get any etror message. It said okay.. Still my phone boots normal with stock recovery..
Click to expand...
Click to collapse
I'm facing the same problem
- Boot phone normally
- Connect USB Cable
- Enable USB Debugging
(Make sure adb is installed, and you pressed "Yes" when device asked for allowing adb on your PC)
- type in cmd: adb reboot recovery
This should boot your device into TWRP. Works for me.
SaranGoda said:
I have tried a dozen image files until now...
I am using honor 7x...
My software is bricked... I am trying to flash TWRP... On pc, there are no errors... But in phone, stock recovery comes up
Click to expand...
Click to collapse
The same thing happens in my case (mine is BND Al 10) When flashing Twrp it say 'okay' but later, it boots normally I to the system or shows that 'your phone is unlocked' page

Can anyone help me unbrick my moto z2 play

Anyone available to assist?
bootloader is unlocked.
BL:C0.CD
i can boot into TWRP that is about it.
Can't boot into OS?
Mark2014 said:
Can't boot into OS?
Click to expand...
Click to collapse
correct
nflnetwork29 said:
correct
Click to expand...
Click to collapse
if u have any rom backup, just restore it.
If not, download the rom below,
https://forum.xda-developers.com/z2-play/development/rom-firehound-v4-6-1-moto-z2-play-t3811949
copy it into your sdcard
and than flash it via TWRP.
tried that got error 255
nflnetwork29 said:
tried that got error 255
Click to expand...
Click to collapse
What did you do?
Try upgrade TWRP to newest version.
Mark2014 said:
What did you do?
Try upgrade TWRP to newest version.
Click to expand...
Click to collapse
I am running TWRP version 3.2.3-0 which is latest verison
nflnetwork29 said:
I am running TWRP version 3.2.3-0 which is latest verison
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=1322778262904007189
Try wiping the entire device (DON'T wipe recovery/bootloader if even possible), then try to flash that ROM again...
nflnetwork29 said:
I am running TWRP version 3.2.3-0 which is latest verison
Click to expand...
Click to collapse
Try another TWRP version with 64bit
https://forum.xda-developers.com/z2-play/development/twrp-moto-z2-play-t3729531
Good luck.
i used
twrp_albus_treble_3.2.2_r23_64.img
Now i receive ERROR 7
Dubstepwolf123 said:
Try wiping the entire device (DON'T wipe recovery/bootloader if even possible), then try to flash that ROM again...
Click to expand...
Click to collapse
can you share the step by step ?
Using TWRP i am assuming ?
nflnetwork29 said:
can you share the step by step ?
Using TWRP i am assuming ?
Click to expand...
Click to collapse
I AM NOT RESPONSIBLE FOR ANYTHING THAT MIGHT BREAK
Yes in TWRP...
1) Enter TWRP
2) Press Wipe
3) Select "Dalvik, Cache, Data, System, Internal Storage"
4) Swipe the slider
5) Then try flashing the ROM
Dubstepwolf123 said:
Try wiping the entire device (DON'T wipe recovery/bootloader if even possible), then try to flash that ROM again...
Click to expand...
Click to collapse
Dubstepwolf123 said:
I AM NOT RESPONSIBLE FOR ANYTHING THAT MIGHT BREAK
Yes in TWRP...
1) Enter TWRP
2) Press Wipe
3) Select "Dalvik, Cache, Data, System, Internal Storage"
4) Swipe the slider
5) Then try flashing the ROM
Click to expand...
Click to collapse
Tried that still getting ERROR 7
nflnetwork29 said:
i used
twrp_albus_treble_3.2.2_r23_64.img
Now i receive ERROR 7
Click to expand...
Click to collapse
Do not use treble. Use r12 or r18 pls
https://drive.google.com/drive/folders/1NP4IQo4SkV8jz_93QK-r1qV6RwbrSE4i
still getting "Updater process ended with ERROR: 7"
I tried r12 & r18
Are you from original rom?
Mark2014 said:
Are you from original rom?
Click to expand...
Click to collapse
i upgraded phone to oreo some time ago and unlocked.
nflnetwork29 said:
i upgraded phone to oreo some time ago and unlocked.
Click to expand...
Click to collapse
try to flash another rom:
https://forum.xda-developers.com/z2-play/development/rom-pixel-experience-t3859477
nflnetwork29 said:
Anyone available to assist?
bootloader is unlocked.
BL:C0.CD
i can boot into TWRP that is about it.
Click to expand...
Click to collapse
Boot into recovery, wipe internal storage, dalvik, cache, sdcard, etc (just tick everything... don't worry, u won't wipe ur recovery)
Then connect to PC, copy over any ROM made for the Z2 Play (I use the Pixel Experience ROM for Albus)
Flash, wipe cache/dalvik, then reboot into system
Should be working...

Touchscreen not working in TWRP

Im using official TWRP but the touchscreen does not work, how can i get around this?
Try to hold power button for 9-10 seconds
hogze94 said:
Im using official TWRP but the touchscreen does not work, how can i get around this?
Click to expand...
Click to collapse
same here, did you get any solution?
Same to me... help!
lupomarano said:
Same to me... help!
Click to expand...
Click to collapse
what screen do you have?
Sprut_name said:
what screen do you have?
Click to expand...
Click to collapse
I have a MI A2 lite,
reflash twrp .. i had the same issue yesterday ..
Connect the phone to the computer (fastboot mode)
Launch the command line and go to the folder where you put all the prerequisites (cd Folder_name)
Boot the recovery image: fastboot boot twrp-daisy-3.3.0-0-offain.img
You will see the recovery on your phone, prompting to enter the password. Choose "Cancel"
Click to expand...
Click to collapse
solved said:
reflash twrp .. i had the same issue yesterday ..
Click to expand...
Click to collapse
tried it over and over again. still having this issue.
TWRP loads up showing me the "Keep System Read only?" page. Touchscreen wont work.
using twrp-installer-3.3.0-dees_troy-daisy
flash a stock rom , then use offain 3.3.0-0 twrp
I have the same problem, this should help https://forum.xda-developers.com/mi-a2/how-to/guide-flashing-roms-twrp-black-screen-t3913052
Thats because u dont have OS, You need to flash OS with MiFlash, unlock bootloader and flash TWRP

Categories

Resources