Related
Hello, I can not post on the developer forums yet, so I will post what I can here.
I was able to get root access to my Samsung ATT Note 8 (SGH-i467). See attached image.
Thank you;
lyriquidperfection: for the packing tools. http://forum.xda-developers.com/show....php?t=2411243
globula_neagra: for the comments on system.img. http://forum.xda-developers.com/show....php?t=1971249
SkipKelley: for starting me off. http://forum.xda-developers.com/show....php?t=2385265
The XDA Forums: for being available.
chainfire: for obvious reasons. http://www.chainfire.eu/
I will try to put together a complete how to when I can. For now I will link to the image files I created.
DO THIS AT YOUR OWN RISK! I DO NOT TAKE ANY RESPONSIBILITY FOR YOUR DEVICE NOT WORKING.
Here we go.
1. Download the i467 firmware from http://www.sammobile.com
1a. Extract the main zip file you downloaded. Leave the .tar.md5 files intact. They are the files you select with Odin in steps six (6) and nine (9).
2. Download Odin 3.07 from http://forum.xda-developers.com/show....php?t=1738841
2a. Extract and launch Odin.
3. Download the pre-rooted I467UCAMF1 images from SAMSUNG-SGH-I467I467UCAMF1-ROOT.tar
3a. Do not extract or modify this file.
4. Do a factory reset of the device either in system settings or using recovery (volume up). Yes, I have found you must do this.
5. Boot into download mode. (Home + Volume Down + Power)
Step 6 is only required if you accepted the OTA "CAMF2".
6. Use Odin to flash all four files downloaded in step 1. BOOTLOADER, CODE, MODEM and CSC files.
6a. Let the device finish install and boot.
6b. Boot into download mode. (Home + Volume Down + Power)
This is the fun part.
7. Select PDA in Odin and select the file downloaded in step 3. Make sure all other files are not checked. Flash... Odin will say it failed. Yes, don't worry, recovery is still there.
8. Reboot into download mode (Home + Volume Down + Power)
9. Using Odin only flash the BOOTLOADER, MODEM, and CSC from step 1. Do not flash the CODE file or the modified image. In other words, leave PDA unchecked in Odin.
10. Let the device install and reboot.
You should now be able to run SuperSU.
If you want to update to OTA CAMF2 then follow these steps BEFORE DOING ANYTHING ELSE;
Thanks to DanMc85 and others for testing. Also, usernamenotfound wrote instructions in the next post, thank you.
1. Start SuperSU and in the settings enable Survival mode.
2. Connect to a Wifi network. (Thanks aTt)
3. Go to system Settings and select About Device at the bottom of the list.
4. Select Software update on the right.
5. Go through the update process and the device will reboot. You should be at version CAMF2.
[EDIT]
Bootloader = BOOTLOADER...tar.md5
PDA = CODE...tar.md5 - Don't select this in step nine (9). Leave blank.
PHONE = MODEM...tar.md5
CSC = CSC...tar.md5
Thank you ZeroxCorbin, this method works flawlessly!
Thanks to DanMc85, crazymikey, & Danno5150 for the following:
If you are looking to update to MF2 after you root, make sure that you enable Survival Mode within SuperSU Pro and then perform the update BEFORE you remove any bloatware or make any changes to the file system, as changes in the system will cause the update to fail.
Remember to do a backup of any apks before removal as this will allow you to put them back in place in preparation for future updates. (MF3?)
Hope this helps mitigate some of the questions.
Thanks again guys!
usernamenotfound said:
usernamenotfound
Click to expand...
Click to collapse
I think we posted at the same time. :highfive:
I updated the instruction to include the update to CAMF2. Thanks for testing it out and letting us know.
Step 3 link not working
ZeroxCorbin said:
3. Download the pre-rooted I467UCAMF1 images from SAMSUNG-SGH-I467I467UCAMF1-ROOT.tar
3a. Do not extract or modify this file.
Click to expand...
Click to collapse
ZC, thanks for this. This is great and I appreciate it. Also, the link in step three for the download wasn't a link for me, so I'm attaching here.
http://www.42nexus.com/i467/SAMSUNG...467I467UCAMF1_SAMSUNG-SGH-I467I467ATTAMF1.tar
Here's the Odin 3.07 link:
http://forum.xda-developers.com/showthread.php?t=1738841
And finally, where the OP lists "Modem" in Odin, I had it as "Phone".
I hope it helps someone.
esoh said:
esoh
Click to expand...
Click to collapse
Thank you, I moved the thread last night. The links must have been removed? They are working again. :good:
Tethering
ZeroxCorbin said:
Thank you, I moved the thread last night. The links must have been removed? They are working again. :good:
Click to expand...
Click to collapse
For anyone trying to tether following root, I used the Wifi Tether instructions at this link and they worked.
http://highonandroid.com/android-ap...android-smartphone-or-tablet-universal-guide/
Thank you very much
Everything went well and I was able to root after 2 months. Took a while, but thank yery much. I've missed Titanium Backup so much.
Instructions were very clear and concise. Was able to root in about 15 minutes with reboots and pushes. Worked perfectly following the instructions to upgrade to MF2
Skip
Thank you this worked perfectly; note I can use the device the way I want to.
Thanks I was worried I was gonna have to take this back! But it worked on secound tty and using Titanium Backup Pro I can fully integrate Root apps and updates into the stock system rom with no trouble! How do you install a TWRP Recovery for this model?
Sent from my SAMSUNG-SGH-I467 using XDA Premium HD app
What will happen if my fone is an unlocked ATT
I am a little worried because I have it unlocked for international 3g sim. If I root it, will i have to unlock again?
Sorry about my dumb question
RootSuperSU said:
Thanks I was worried I was gonna have to take this back! But it worked on secound tty and using Titanium Backup Pro I can fully integrate Root apps and updates into the stock system rom with no trouble! How do you install a TWRP Recovery for this model?
Sent from my SAMSUNG-SGH-I467 using XDA Premium HD app
Click to expand...
Click to collapse
We can't flash any custom recoveries until the bootloader is unlocked
At least we have root.
terra-starr said:
We can't flash any custom recoveries until the bootloader is unlocked
At least we have root.
Click to expand...
Click to collapse
I think that he's talking about SIM unlock maybe? If that's the case, I'm assuming that the way that this root was setup, you will probably need to re-unlock the SIM, but I'm not 100% sure.
So glad we finally have root! Won't do this until a bootloader is figured out though. But this is the first step! I wish I knew more on how to crack bootloaders to help out :/
So I know, does this method work with the OTA Update that AT&T put out in August?
ZeroxCorbin said:
Hello, I can not post on the developer forums yet, so I will post what I can here.
I was able to get root access to my Samsung ATT Note 8 (SGH-i467). See attached image.
Thank you;
lyriquidperfection: for the packing tools. http://forum.xda-developers.com/show....php?t=2411243
globula_neagra: for the comments on system.img. http://forum.xda-developers.com/show....php?t=1971249
SkipKelley: for starting me off. http://forum.xda-developers.com/show....php?t=2385265
The XDA Forums: for being available.
chainfire: for obvious reasons. http://www.chainfire.eu/
I will try to put together a complete how to when I can. For now I will link to the image files I created.
DO THIS AT YOUR OWN RISK! I DO NOT TAKE ANY RESPONSIBILITY FOR YOUR DEVICE NOT WORKING.
Here we go.
1. Download the i467 firmware from http://www.sammobile.com
1a. Extract the main zip file you downloaded. Leave the .tar.md5 files intact. They are the files you select with Odin in steps six (6) and nine (9).
2. Download Odin 3.07 from http://forum.xda-developers.com/show....php?t=1738841
2a. Extract and launch Odin.
3. Download the pre-rooted I467UCAMF1 images from SAMSUNG-SGH-I467I467UCAMF1-ROOT.tar
3a. Do not extract or modify this file.
4. Do a factory reset of the device either in system settings or using recovery (volume up). Yes, I have found you must do this.
5. Boot into download mode. (Home + Volume Down + Power)
Step 6 is only required if you accepted the OTA "CAMF2".
6. Use Odin to flash all four files downloaded in step 1. BOOTLOADER, CODE, MODEM and CSC files.
6a. Let the device finish install and boot.
6b. Boot into download mode. (Home + Volume Down + Power)
This is the fun part.
7. Select PDA in Odin and select the file downloaded in step 3. Make sure all other files are not checked. Flash... Odin will say it failed. Yes, don't worry, recovery is still there.
8. Reboot into download mode (Home + Volume Down + Power)
9. Using Odin only flash the BOOTLOADER, MODEM, and CSC from step 1. Do not flash the CODE file or the modified image. In other words, leave PDA unchecked in Odin.
10. Let the device install and reboot.
You should now be able to run SuperSU.
If you want to update to OTA CAMF2 then follow these steps BEFORE DOING ANYTHING ELSE;
Thanks to DanMc85 and others for testing. Also, usernamenotfound wrote instructions in the next post, thank you.
1. Start SuperSU and in the settings enable Survival mode.
2. Connect to a Wifi network. (Thanks aTt)
3. Go to system Settings and select About Device at the bottom of the list.
4. Select Software update on the right.
5. Go through the update process and the device will reboot. You should be at version CAMF2.
[EDIT]
Bootloader = BOOTLOADER...tar.md5
PDA = CODE...tar.md5 - Don't select this in step nine (9). Leave blank.
PHONE = MODEM...tar.md5
CSC = CSC...tar.md5
Click to expand...
Click to collapse
_____________________________________________
I already have the MF2 build can i still follow this steps?
yahjz said:
_____________________________________________
I already have the MF2 build can i still follow this steps?
Click to expand...
Click to collapse
Step six is just for you.
Only issue I had was forgot how picky Odin is about cables. Used a monoprice one and it Odin wouldn't see it. Used the stock cable and all was good.
Tablet is rooted and am in the process of debloating it.
Thanks very much for this. We all appreciate it.
Happy Note 8
Thanks thanks thanks. It worked like a charm!!! :good: I did have to find a shorter cable - wonder why my 10ft cable didn't work :laugh:
I am unclear on the use of odin
I am unclear on these two parts:
Step 6 is only required if you accepted the OTA "CAMF2".
6. Use Odin to flash all four files downloaded in step 1. BOOTLOADER, CODE, MODEM and CSC files.
6a. Let the device finish install and boot.
6b. Boot into download mode. (Home + Volume Down + Power)
This is the fun part.
7. Select PDA in Odin and select the file downloaded in step 3. Make sure all other files are not checked. Flash... Odin will say it failed. Yes, don't worry, recovery is still there.
8. Reboot into download mode (Home + Volume Down + Power)
9. Using Odin only flash the BOOTLOADER, MODEM, and CSC from step 1. Do not flash the CODE file or the modified image. In other words, leave PDA unchecked in Odin.
I have not used Odin, how do you "flash" these files? It looks like you have to do them one at a time. I am just unclear how to flash the files.
Also, It looks like you are doing them twice if you have the CAMF2 update, which I do, is that the case?
Jim
ZeroxCorbin said:
Hello, I can not post on the developer forums yet, so I will post what I can here.
I was able to get root access to my Samsung ATT Note 8 (SGH-i467). See attached image.
Thank you;
lyriquidperfection: for the packing tools. http://forum.xda-developers.com/show....php?t=2411243
globula_neagra: for the comments on system.img. http://forum.xda-developers.com/show....php?t=1971249
SkipKelley: for starting me off. http://forum.xda-developers.com/show....php?t=2385265
The XDA Forums: for being available.
chainfire: for obvious reasons. http://www.chainfire.eu/
I will try to put together a complete how to when I can. For now I will link to the image files I created.
DO THIS AT YOUR OWN RISK! I DO NOT TAKE ANY RESPONSIBILITY FOR YOUR DEVICE NOT WORKING.
Here we go.
1. Download the i467 firmware from http://www.sammobile.com
1a. Extract the main zip file you downloaded. Leave the .tar.md5 files intact. They are the files you select with Odin in steps six (6) and nine (9).
2. Download Odin 3.07 from http://forum.xda-developers.com/show....php?t=1738841
2a. Extract and launch Odin.
3. Download the pre-rooted I467UCAMF1 images from SAMSUNG-SGH-I467I467UCAMF1-ROOT.tar
3a. Do not extract or modify this file.
4. Do a factory reset of the device either in system settings or using recovery (volume up). Yes, I have found you must do this.
5. Boot into download mode. (Home + Volume Down + Power)
Step 6 is only required if you accepted the OTA "CAMF2".
6. Use Odin to flash all four files downloaded in step 1. BOOTLOADER, CODE, MODEM and CSC files.
6a. Let the device finish install and boot.
6b. Boot into download mode. (Home + Volume Down + Power)
This is the fun part.
7. Select PDA in Odin and select the file downloaded in step 3. Make sure all other files are not checked. Flash... Odin will say it failed. Yes, don't worry, recovery is still there.
8. Reboot into download mode (Home + Volume Down + Power)
9. Using Odin only flash the BOOTLOADER, MODEM, and CSC from step 1. Do not flash the CODE file or the modified image. In other words, leave PDA unchecked in Odin.
10. Let the device install and reboot.
You should now be able to run SuperSU.
If you want to update to OTA CAMF2 then follow these steps BEFORE DOING ANYTHING ELSE;
Thanks to DanMc85 and others for testing. Also, usernamenotfound wrote instructions in the next post, thank you.
1. Start SuperSU and in the settings enable Survival mode.
2. Connect to a Wifi network. (Thanks aTt)
3. Go to system Settings and select About Device at the bottom of the list.
4. Select Software update on the right.
5. Go through the update process and the device will reboot. You should be at version CAMF2.
[EDIT]
Bootloader = BOOTLOADER...tar.md5
PDA = CODE...tar.md5 - Don't select this in step nine (9). Leave blank.
PHONE = MODEM...tar.md5
CSC = CSC...tar.md5
Click to expand...
Click to collapse
I downloaded the factory firmware from sammobile (took over 2 hours)
but I think the csc file is corrupt. odin gives an error when I try to select it, and windows shows that the last modified date for the file is year 3247
I downloaded the zip again from sammobile and it's still the same.
Could anyone upload the csc file somewhere like dropbox??
Thanks
EDIT: When I tried to select the csc file I was getting the error "parameter is incorrect". Googling the error shows people saying to remove the ".md5" extension and retry.
When I did, it accepted it (although I didn't flash it yet). But I just wanted to make sure that I am not bypassing the checksum and flashing a corrupt file. Is that what you guys had to do as well, assuming it is still the same factory firmware on sammobile?
Thanks
Can i use that to repair my bricked Note ?
How to Root Samsung Galaxy Note 10+ & Flash TWRP (Exynos Only)
NOTICE :
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with un rooting, some may never.
- All your data on device will be lost
- Flashing custom binaries may brick (Usually soft but can be hard brick too) your device, so follow it on your own risk!
If you are ready with condition, move further -
Click to expand...
Click to collapse
Important : Since android Q, there is changes in rooting process, specially if you needs root with TWRP, So here I am dividing this guide in two parts.
1.Root with self preparing files (No TWRP) - Here you needs to patch stock files yourself. No TWRP installed.
2.Root with TWRP - You needs to just flash pre-patched files, Here you needs to have ROM installed same base as per files available. Though mostly latest verson will be available.
PART 1 : (Root Pie/Q base with magisk with patching files yourself, No TWRP)
Before moving to root device, must read every single instruction given below as any small mistake can lead to fail to achieve root or may brick the device.
A.Preparing Root files
You need to patch file to flash using Odin to root device.
1. Download stock firmware for your device (google search will give you many sites to download it) some common are e.g. Sammobile, Samfirmware tool)
you need to download file according your region and model (Dial *#1234# will give you details of existing firmware, download accordingly)
2. Once you finish download, extract files and keep all files on PC. From extracted files a file with name AP_[device_model_sw_ver].tar.md5 copy to your device.
3.Download Latest Magisk Manager and Install to your device
4.Open Magisk Manager - Magisk (first one) - Install - select to "Select and Patch file" - Navigate file you have copied to device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar
6.Copy patched file magisk_patched.tar to Your PC
7.Download latest Odin (one is attached to end of this post) and extract to a folder on PC (I recommend on desktop)
Now next step is to modification on device
B. Unlocking Bootloader
This is a basic step to root device. Go to settings - about phone - Software Information - tap multiple times on "Build number" - This will open developer option.
Now in settings at the end, you will have new option "Developer options" - look for OEM unlocking - Enable it.
(PS : If you don't see this option then you may need to wait up to 7 days or more to appear or may be on some operator you will get it never. Without this option you can not root your device, sorry!)
Once you have enable OEM unlock option, switch off your device and reboot to download mode.
To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable
When device start to download mode,long press volume up to unlock the bootloader. This will wipe your data and automatically reboot
Now let finish setup and again enable developer options (as said above), and confirm that the OEM unlocking option exists and grayed out!
If it is not then you can not root device!
Once you see this option and greyed out, you are ready to flash custom binary and root your device
C.Installation (Flashing) custom binaries
1. Switch off the device and reboot to download mode (As said earlier) and select volume up to continue
2. Open Odin (downloaded from above instruction) as administrator
Select magisk_patched.tar file you have patched (as above instruction copied to PC) for AP tab of Odin
Select BL,CP and CSC file (Extract from stock firmware you have downloaded) with according respective tab of Odin (This is important, DON'T flash only magisk_patched.tar )
3.From Odin option - uncheck Auto Reboot option
4.Now start flashing and wait till it finish. When you see a PASS sign on Odin, disconnect device.
Now magisk is successfully finished but yet you need to follow instructions below.
D. Factory reset & Boot with magisk
After disconnecting device, keep holding Vol down + Side key to exit from download mode.
Here is very important - when you see device reboot As soon as the screen turns off, immediately press Volume Up + Side Key to boot to recovery partition. continue pressing the volume up button until you see the stock recovery screen.
In the stock recovery menu, use volume buttons to navigate through menus, and the power button to select the option. Select Wipe data/factory reset to wipe the data of the device.
Select Reboot system now, and immediately press Volume Up + Side Key. After seeing the bootloader warning screen, release all buttons so it can boot to the system.
The device will automatically reboot for the first time it boots. This is completely normal and done by design.After the device is booted up, do the usual initial setup. You shall see Magisk Manager in your app drawer; if not, manually install the APK you downloaded and continue to the next step. The app would be a stub and it shall automatically upgrade to the full Magisk Manager when you open it.
Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Voila! Enjoy Magisk
PART 2 : (Root Q base with TWRP)
This requires to have your device on same base as per base of pre-patch files. I am giving link below of my ROM
http://www.mediafire.com/folder/d4ugie4yadxu6/N975F - Click link - First select your device (N970/N975/N976) - download file Instructions_Root_TWRP_BootloopFix.pdf
This file have complete details about how to root with stock recovery/TWRP. Also all required patched files will be available in "Q" folder of your device section,
Also "Q" folder have file BASE_N97*.txt - Name of this file indicates Model and base used for patched files, you should have same base installed.
Important :
Due to the fact that some devices no longer uses ramdisk in boot images, Magisk has no choice but to be installed in the recovery partition. For these devices, you will have to boot to recovery every time if you want Magisk. Since both Magisk and recovery lives in the same partition, what you actually end up getting when you choose to boot to recovery will be determined by how long you press volume up.
(Powering up normally) → (System with NO Magisk)
(OEM Recovery Key Combo) → (Splash screen) → (Release all buttons) → (System with Magisk)
(OEM Recovery Key Combo) → (Splash screen) → (Keep pressing volume up) → (Actual recovery)
For more details read Installation guide by @topjohnwu from Here
All credit and thanks go to
@topjohnwu for magisk & Guide.
geiti94 for TWRP Here OP & Source
ianmacd for latest TWRP - Here OP & Source
Happy rooting!
Xposed
Just tried and eDxposed working fine.
- Install EdXposed installer
- from magisk download install Ritu-core module
- from magisk download install Ritu - EDxposed (yahfa)
Done.
We strongly recommend to make EFS backup as soon as you root device and store it to safer place
Don't you lose some Samsung function when you root and even relock the bootloader?
MrPhilo said:
Don't you lose some Samsung function when you root and even relock the bootloader?
Click to expand...
Click to collapse
Who cares?
Development can't go without this.
We developer need to risk it. No way.
Nice, already patched the rom to flash with odin. What is the button combination for recovery ?
Did that for a friend of mine on the S10e, guess the steps are all the same ??
Nice, so you will start to make roms ?
Keep it coming :laugh:
optx said:
Nice, already patched the rom to flash with odin. What is the button combination for recovery ?
Did that for a friend of mine on the S10e, guess the steps are all the same ??
Click to expand...
Click to collapse
OP updated for combo key
dr.ketan said:
OP updated for combo key
Click to expand...
Click to collapse
Many thanks, now i just have to wait for the Note 10+ to arrive in a few hours :highfive:
dr.ketan said:
Who cares?
Development can't go without this.
We developer need to risk it. No way.
Click to expand...
Click to collapse
Waiting for your guide, twrp, magisk and so on...
I am not developer, just tester, but still need root...
Dr Ketan. Most Welcome My Bro. Follow you since Note 9. U rock my bro :good:
namfat said:
Waiting for your guide, twrp, magisk and so on...
I am not developer, just tester, but still need root...
Click to expand...
Click to collapse
Twrp not available and possible only after samsung release kernel source code. Great news is @ianmacd getting N10 who known for twrp development. :good:
dr.ketan said:
Twrp not available and possible only after samsung release kernel source code. Great news is @ianmacd getting N10 who known for twrp development. :good:
Click to expand...
Click to collapse
That's really good to hear.
With you and the guy you've mentioned we have everything we need.
Cheers!
Did you have the OEM unlock right away in Developer options ? Cant see it on mine...
First Phone ever that has no OEM unlock right away ...
dr.ketan said:
Twrp not available and possible only after samsung release kernel source code. Great news is @ianmacd getting N10 who known for twrp development. :good:
Click to expand...
Click to collapse
OK then, please share root instruction first.
I dont know if N10 have the same problem but it happened with latest base on S10 5G that only using stock recovery if need rooted.
optx said:
Did you have the OEM unlock right away in Developer options ? Cant see it on mine...
First Phone ever that has no OEM unlock right away ...
Click to expand...
Click to collapse
My device have OEM unlock option available. If you dont have, maybe you need to wait for 7 days.
OP Updated with full instruction about how to root.
Kindly go through detail before proceed.
I'm assuming this is for Exynos version ONLY?
No where do I see this prerequisite posted anywhere but has always been in the past.
cpufrost said:
I'm assuming this is for Exynos version ONLY?
No where do I see this prerequisite posted anywhere but has always been in the past.
Click to expand...
Click to collapse
I have added to title but prerequisite is having OEM unlock enable which I believe not having on snapdragon isn't?
dr.ketan said:
I have added to title but prerequisite is having OEM unlock enable which I believe not having on snapdragon isn't?
Click to expand...
Click to collapse
So far with the SD when you go into developer mode there is no OEM unlock and I doubt it will show up later.
Don't know what is wrong. I have OEM turned on, Downloaded latest magisk manager, flashed all 4 parts. It did not work. If I flash stock, all is fine. Any clues ?
Pinu'u said:
Don't know what is wrong. I have OEM turned on, Downloaded latest magisk manager, flashed all 4 parts. It did not work. If I flash stock, all is fine. Any clues ?
Click to expand...
Click to collapse
OEM lock should be turned off AFAIK
Thx, will give it a try after flashing back stock.Irritating that OP says turn on ...
Could not find a single post or website that correctly explained how to root my Samsung Galaxy A30S that I bought May 2020.
In the end I got it rooted. Here is what I did (I think have to go from memory, not going to restore my phone and try again, was in Knox jail for a week, so not risking that again).
step 0:
download Samsung kies and install
download and install Frija the Samsung Firmware download tool
download adb platform tools and install. Not strictly necessary I think but can be useful and easy way to boot into bootloader if things go wrong.
step 1:
When your phone is new:
update (or wait that the phone updates) to the latest android version
This may take a while an repeated reboots.
step 2
unlock the bootloader :
1. go to Setting>About>Software>Build Number and Tap on the build number repeatedly so that the Developer mode will turn on.
2. In the developer options, there is an OEM unlock option then enable that option.
Now Enter Download Mode Galaxy A30s:
1 Turn Power off the phone
2 Press and hold Volume Down + Volume Up keys together
3 While pressing these keys connecting the phone to PC with USB Cable Data.
4 Release all keys when Download Mode appears.
follow the instruction (ie keep the volume up button pressed for over 7 seconds)
step 3:
use the Frija tool to download samsung galaxy 30s latest firmware, the same one that is also installed on your phone
Once you’ve downloaded the stock firmware file based on your device model number, you can extract the boot.img.lz4 file to patch it via the Magisk Manager app. You do this as follows:
Step 4
Copy only the boot.img.lz4 file from the extracted AP folder to your device storage.
Install 7-Zip-Zstandard or use a windows lz4 command line tool to unpack boot.img.lz4 to boot.img
Download and install the latest Magisk Manager app and install on your phone.
Transfer the boot.img file to an SD card so Magisk can access it (or connect your phone and use file transfer)
Next, open the Magisk Manager app and select Install and choose to Install it again.
Then tap on “Patch Boot Image File”.
Go to internal storage and select your device boot image that you moved to your phone earlier.
Now, wait for Magisk to start patching the boot image.
Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and put it somewhere on your PC.
Next repack it to boot.img.lz4 using 7z or lz4 and then do it again but now pack it boot.img.lz4.tar so ODIN can write it.
step 4:
Make sure that OEM unlock is still off!
Enter Download Mode Galaxy A30s and go to download mode.
Make sure it says FRP lock and OEM lock are off.
Otherwise the ODIN write will fail and OEM/knox protection will kick in during ODIN write and it will fail.
And then you have to wait a week until OEM unlock option in developers option becomes available again.
download latest ODIN version.
Select in ODIN 'AP' and select boot.img.lz4.tar and then write it.
That should work and reboot your phone.
step 5:
you may have to install magisk on your phone again.
Start magisk and make sure magisk and magisk manager are up to date.
use the menu in the upper left corner, choose modules and install busy box.
Now install terminux on your phone and use the su command to see if you can become root.
If you type 'su' in terminux magisk window should pop up and ask if you want to grant superuser access to terminux.
Can you tell us about ur baseband version on ur devices, and could you please to share only boot image. I think so much if downloading firmware full.:fingers-crossed:
baseband: A307GDXUBTD1
boot image
drive(dot)google(dot)com/file/d/187U5hK75k4VIj5D5VlU7Zq7HpSzG8e6z/view?usp=sharing
Android security patch level: 1 March 2020
Tuyol said:
Can you tell us about ur baseband version on ur devices, and could you please to share only boot image. I think so much if downloading firmware full.:fingers-crossed:
Click to expand...
Click to collapse
how can i repack boot.img.lz4 to boot.img.lz4.tar?
i was trying to repack boot.img.lz4 to tar but it just does boot.img.lz4 to boot.img.tar
Good
Help pls
Pls someone tell me that this AP file patch correct? I am confusing bcoz of last typing
I am not responsible for any damage to your device, when you root you lose the Warranty
1 - Download Frija
2 - Put your model and your csc (My CSC for example is the ZTO since the device was manufactured in Brazil)
3 - Download Odin
4 - Download Samsung Drivers VCOM
5 - Install the Driver and unzip your Stock ROM
6 - Download the MagiskCanary on your Device, and pass the AP file from your Stock to the device.
7 - Install Magisk Manager Canary on your device, and in Install check the patch option, choose the AP file that you passed before.
8 - After magisk Canary makes its Magic, in the download folder you will find the new file Magisk_Patch
9 - Pass the new magisk file to the computer.
Procedure for Android 10Q
1 - In the download mode, I need the VolUp button to unlock the Bootloader.
If Android 9P proceed here
2 - Download MiracleBox.
3 - Put your device in download mode (Bootloader is now unlocked)
4 - Through MiracleBox do Reactvation EE.
5 - Disconnect and put it in download mode again
6 - No Odin Put Magisk_Patch in AP and flash.
+If Magisk turns out to be Magisk not installed, go to your device's settings, and Reset by Android itself.
Hi!
When I try to unlock the bootloader here is what I come up against: it says long press up volume to unlock the bootloader. I long press and the phone simply reboots, and starts back up. I am at my wits end!
Procedure for Android 10Q
1 - In the download mode, I need the VolUp button to unlock the Bootloader.
I have a Samsung A10s (A107M) If anyone can help I would be grateful!
Thanks!
My exact issue.
I have attempted both unlocking methods (with commands and through the phone itself), without any success.
Quite disappointing, I will probably quit once and for all.
SandsCayman said:
Hi!
When I try to unlock the bootloader here is what I come up against: it says long press up volume to unlock the bootloader. I long press and the phone simply reboots, and starts back up. I am at my wits end!
Procedure for Android 10Q
1 - In the download mode, I need the VolUp button to unlock the Bootloader.
I have a Samsung A10s (A107M) If anyone can help I would be grateful!
Thanks!
Click to expand...
Click to collapse
Had the same issue
Once you get to the volume up to unlock screen
Click volume up 2 to 10 times until it reboots
Worked for me when I had the issue
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
stylemonument said:
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
Click to expand...
Click to collapse
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Please see here: Bootloader Unlock Service For US Variants
BoiBundy said:
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Click to expand...
Click to collapse
Okay.... let me do that. Thanks.
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Msgd re: oem unlock! Btw, if we got any awesome Sam sec experts out there who wouldn’t mind entertaining some qs from me regarding a lot of WEIRD stuff happening w my phone, be eternally grateful. Could even work out a monetary deal for your time, and (perhaps) help!
Thanks much in adv, msg on telegram as @nemotheDreamer.
butchieboy said:
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
You might be right, I will edit it tonight
So we can legit root the Snapdragon version now?
Nickdroid86 said:
So we can legit root the Snapdragon version now?
Click to expand...
Click to collapse
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
cerj said:
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
Click to expand...
Click to collapse
Thanks man, wanted to have a central "fool-proof" way for people to enjoy the freedom of root
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
MonkeyJug said:
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
Click to expand...
Click to collapse
Check Here: https://forum.xda-developers.com/t/sampwnd-usa-model-bl-unlock-info-u-u1-w.4201689/
I've been on Nexus and Pixel devices so long now I cannot remember much about modification on Samsung devices. Last one I had rooted was the Note 2. Anyway, bootloader unlocked and successfully rooted my SM-N975U (Note 10+). Now there are updates available so I am sorry if this isn't the place or if a dumb question, but is there any special way I need to do updates on the snapdragon so I don't relock the bootloader or lose root? With Pixel, ADB sideload was easy, not sure with this one.
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
nabnab25658 said:
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
Click to expand...
Click to collapse
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Dick_Stickitinski said:
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Click to expand...
Click to collapse
Hey, just wanted to thank you for pointing me in the right direction. I've had my Sm-976V BL unlocked and rooted for a bit now, but have been busy hence the late reply.
I have an issue. I boot into TWRP just fine but all my files in sdcard are nothing but random numbers and letters
I think this happens when you don't wipe your data. You also need to flash a decryption file. It happened to me at first because I didn't wipe all data.[/QUOTE]
BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
which TWRP version to flash and which odin? hope i can get answer i had N975U1 unlocked bootloader
Anyone else getting that pesky "Android 11 Update" since they have rooted? I keep postponing it. I'm guessing it will fail if I try to install. Not sure what I should do.
Sammobile don't seem to have the firmware available yet. I was thinking installing it with odin then patching AP with Magisk
BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
it works on my N975U1 android 10 Q version 1st method so no need 2nd method