Related
Work only on Oreo 8
You must be Stat Normal
Oem Unlocked
Enable USB Debugging Mode and OEM Unlock in your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy J7 Duo.
Download and install the Samsung USB driver to your computer system.
Also, download the ODIN software. Select above Oreo version in the ODIN list. Install ODIN in your PC.
Download Magisk.Zip (Download Latest version) and forced encryption disabler, Copy it to Your Phone Memory. We Need to flash encryption disabler to avoid Boot Warnings in the future after the Root process.
Download and save the TWRP File. Select Correct TWRP file from Below. This TWRPs can support Up to Oreo.
SM-J720F
SM-J720M
Flash TWRP using ODIN
Samsung Galaxy J7 Duo Download Mode
Connect your USB Cable with PC. Switch off your device. Then, enter into Download mode. To do this; press and hold down the Volume Down + Home + Power buttons and connect your micro USB Cable.
Samsung Galaxy J7 Duo Download Mode Warning Screen
Press the Volume Up button to continue when you see the warning message.
Now, connect the Samsung Galaxy J7 Duo mobile to the computer via USB cable.
Launch the Odin app on your computer. If the device is detected by this app (Odin), it will show you a message that reads – added!!!
ODIN Added Message
However, if the device is not correctly connected to the PC, you won’t see this message. So, you have to check the USB cable if it is reasonable and reconnect the device.
After connecting the Samsung device, click on the PDA/PA button to browse/search and get the TWRP from where you saved it on your PC. Also, navigate to “options” and tick the Auto Reboot.
Odin Auto Reboot
Click on “Start”
Once the file is loaded into the device, reboot your device.
Kudos, you have just Installed the TWRP on your Samsung Galaxy J7 Duo. If you installed TWRP, Don’t turn on your mobile. Immediately, move to Magisk Installation steps.
You should not Boot into Normal OS Booting, after TWRP. After TWRP Flash, Immediately Boot into Recovery or twrp will gone
Boot it Into recovery mode->Volume Up + Power Button.+Home
Now it Will Boot into TWRP Recovery Mode.
Install Magisk, forced encryption disabler in your Samsung Galaxy J7 Duo using TWRP
Select Wipe->Advance Wipe->Select Cache Data.
Return to Home of TWRP select Install.
Select Magisk.Zip.
After Installation again Navigate to Home select Install. Select forced encryption disabler.
After the Installation Reboot Your Mobile.
You can also install Magisk.apk in your Mobile Applications. Forced encryption disabler is used to avoid the boot loop issue after rooting.
enjoy
SM-J720F
SM-J720M
encryption disabler
Samy6699 said:
Work only on Oreo 8
SM-J720F
SM-J720M
enjoy
SM-J720F
SM-J720M
encryption disabler
Click to expand...
Click to collapse
Can it be used on the Dual-Sim version SM-J720F/DS released in 04/2018 ?
Can i install it on Galaxy J7 Duo running Android pie
Nitin devarasetty said:
Can i install it on Galaxy J7 Duo running Android pie
Click to expand...
Click to collapse
i also need that man.
Please make one thing clear
Do we have to turn off "Auto reboot"
Or keep the "Auto reboot" option checked on?
Android 9.0
Hello, when it will be possible ? If never, why ?
I followed the exact process but everytime i tried to boot into TWRP recovery immediately after the flashing, the device still boots into stock recovery instead of TWRP
Please help me with this
Thank you
I figured out a way to root the Galaxy J7 duo
Actually i have tried lot of ways to root using TWRP flash and all.. but one day i accidentally bricked my device
So i downloaded the stock ROM to flash my device
And i downloaded the 8.0 android ROM
So this root method basically tested on android 8.0
So now i have android 8.0 stock ROM downloaded
Step 1 -
So make sure you also downloaded the ROM
And extract the ROM file (you must have got the "AP" "CP" "BL" "CSC" and "HOME CSC" file)
Then copy the "AP" file in your phone
Then install magisk manager in your phone
Open magisk, select install, select and patch a file from magisk
Then select "AP" file
And wait while magisk is patching the "AP" file
When flashing is done the patched file will be saved on storage, emulated, 0, download (file will be saved as "magisk_patched.tar")
Then simply copy the patched file in your computer
Step 2 -
Open odin in your Computer
In odin, select "magisk_patched.tar" in "AP" section
Select "BL" from the stock ROM folder in the odin's "BL" section
Select "CP" from the stock ROM folder in the odin's "CP" section
Select "HOME CSC" from the stock ROM folder in the odin's "HOME CSC" section
make sure you select all the official files from the stock ROM folder... just instead of the "AP" file, select the "magisk_patched.tar"
Then connect your phone via USB cable
Odin will detect and show "added" message
Start the flashing process
It will take few minutes
When its done your phone will boot up
But it will show something like "erasing" and "verification unsuccessful"
Just agree with that and erase the phone
(It will cause a data loss because everything will be deleted and your phone will reset, so i suggest to make a backup using samsung smart switch)
Then when your phone will reboot, just follow the steps to setup
Amd install magisk latest apk
Open magisk and boom!
You can already realize that magisk root is activated
Amd magisk will ask you to "setup environment"
Just agree and your phone will reboot withing 5 seconds
And done!
Your phone is now rooted
Install root checker and verify your root status
how to un-brick
Same thing here,
Tell me how you un-bricked your phone
I bricked my phone by installing wrong twrp file to sm-j720f android pie with odin
and now it shows only bootloader screen and I can't even go to recovery mode or home screen just showing " SAMSUNG GALAXY J7 DUO secured by Knox powerd by android" noting else
That is exactly what was happened in my phone
So what i did just downloaded the Stock ROM for J7 duo from the sam mobile website.
Then extract the ROM and you will get few files ("AP", "BL", "CP", "CSC", "HOME CSC")
Then boot your phone into download mode using this method
(Connect the phone to your PC using USB cable, then press and hold Power + volume down + home, then when the "powered by android" logo appears release only the power button... so your phone will boot into download mode, press volume up to continue)
Now, in odin you can see "added" message that means device is connected
Now select the ROM files respectively, BL, AP, CP, CSC
Then click start, and the process will start, will take few minutes
When done, your phone will boot normally
Yeah everything is right until...
[grand_theft;83142325]That is exactly what was happened in my phone
***********
So what i did just downloaded the Stock ROM for J7 duo from the sam mobile website.
Then extract the ROM and you will get few files ("AP", "BL", "CP", "CSC", "HOME CSC") *********
Then boot your phone into download mode using this method
Fact that I cant even go to download mode I tried out many times
Just follow this step
(Connect your computer with your phone using USB cable, then press and hold Power + volume down + home, then when the phone vibrates and appears the samsung logo again just release only the power key, while holding the volume down and home key)
(Just release only the power key when the "powered by android" logo appears)
Thats how you can go to the download mode
No virtual change
Done it as u say,
But my mobile shows noting but just logo screen
*****SAMSUNG GALAXY J7 DUO secured by Knox powered by android*****
again and again
These is not first time, last I did the same mistake before and I went to Samsung service store they recovered it, I don't know how they did but it worked.
These time I want to (tring to) do it on my own bcoz I love playing with ROM's, root, etc.
Thanks for replys
I also did the same mistake by flashing wrong TWRP
But however i managed to enter into downlod mode following those steps
And flashed official ROM to unbrick the phone
You must go into download mode to flash the official ROM using odin
Thanks alot
Thanks man,
I'm able to enter download mode and I installed official ROM. Now in using it as normal but (1)Secure folder and Pay mini are not working.
(2)Do you have any idea on other ROMs that works on SM-J720F other than Samsung's one UI.
(3)can I install android 8 on it in ordered to root as you said it in previous post.
(4)from previous your post on oreo twrp explanation, is twrp works fine. What happens to twrp if I update phone to Q (from system updater)
I'm glad you made it!
Now,
1) Secure folder and pay mini won't work because the phone thinks you rooted your phone and maybe your binary is cracked (so forget using those)
2) I'm not sure about any ROMs which is stable with this model. But you can search the internet (I think pixel ROM is pretty popular)
3) I'm not sure if my process of rooting supports android 9.0 or not, because i personally tetsted it on 8.0, So you can download the oreo ROM from the internet and then follow all the steps i mentioned before
4) If you want to install TWRP, you can still install TWRP after rooting via the method i provided
(You can install TWRP using flashify on a rooted phone)
But if you want root access then you can simply root your phone first..
And whatever custom ROMs you want to install, install it using flashify
Because if you update software via official OTA, the root access and TWRP both will be gone
And if you root your phone, then however you won't be able to perform a official OTA update.
(First root your phone, then simply download your TWRP file and flash it with root permission within your phone)
Instated of Oreo AP file,
grand_theft said:
I figured out a way to root the Galaxy J7 duo
Actually i have tried lot of ways to root using TWRP flash and all.. but one day i accidentally bricked my device
So i downloaded the stock ROM to flash my device
And i downloaded the 8.0 android ROM
So this root method basically tested on android 8.0
So now i have android 8.0 stock ROM downloaded
Step 1 -
So make sure you also downloaded the ROM
And extract the ROM file (you must have got the "AP" "CP" "BL" "CSC" and "HOME CSC" file)
Then copy the "AP" file in your phone
Then install magisk manager in your phone
Open magisk, select install, select and patch a file from magisk
Then select "AP" file
And wait while magisk is patching the "AP" file
When flashing is done the patched file will be saved on storage, emulated, 0, download (file will be saved as "magisk_patched.tar")
Then simply copy the patched file in your computer
Step 2 -
Open odin in your Computer
In odin, select "magisk_patched.tar" in "AP" section
Select "BL" from the stock ROM folder in the odin's "BL" section
Select "CP" from the stock ROM folder in the odin's "CP" section
Select "HOME CSC" from the stock ROM folder in the odin's "HOME CSC" section
make sure you select all the official files from the stock ROM folder... just instead of the "AP" file, select the "magisk_patched.tar"
Then connect your phone via USB cable
Odin will detect and show "added" message
Start the flashing process
It will take few minutes
When its done your phone will boot up
But it will show something like "erasing" and "verification unsuccessful"
Just agree with that and erase the phone
(It will cause a data loss because everything will be deleted and your phone will reset, so i suggest to make a backup using samsung smart switch)
Then when your phone will reboot, just follow the steps to setup
Amd install magisk latest apk
Open magisk and boom!
You can already realize that magisk root is activated
Amd magisk will ask you to "setup environment"
Just agree and your phone will reboot withing 5 seconds
And done!
Your phone is now rooted
Install root checker and verify your root status
Click to expand...
Click to collapse
************************************************************************************************************************************************************************************************************************************************************************************************************
Ok I agree with you,
But what if I replace Oreo's AP file with android 10's AP file(which I installed recently on my phone), will it boot with root or not.
************************************************************************************************************************************************************************************************************************************************************************************************************
I have not tested this method on any other android version, you can still try it on your own, there is nothing to lose, just make a backup before flashing. If you succeed then that's great
But i have personally tested this method only on android 8.0
(Before doing anything, just make a proper backup using samsung smart switch. So you can restore your important data)
Success
Replaced with android 10's AP file and flashed with Odin. Now my phone has rooted with Magisk manager.
Any suggestions to tweak android
Claudio4780 said:
Can it be used on the Dual-Sim version SM-J720F/DS released in 04/2018 ?
Click to expand...
Click to collapse
Have you ever got the answer or figured it out? I've got the same model and I cannot find anything on the net to help me with rooting this phone.
Hi All this is just a quick tutorial to help you all root your devices, on later firmwares
This 100% works ive done it over and over without any problems. I am currently on october patch latest firmware for my A105FN. As you may know Samsung have now added extra security meaning even if you have already unlocked your bootloader after you patch the firmware with magisk, flash patched firmware and reboot you will be greeted with that dreadfull message, Only official binaries allowed and your device will be locked and wont boot untill you reflash stock firmware again. The below will help get you out of the prenormal kg state, and save's you a 7 days waiting period as we dont have any TWRP available for our device at this time. Also note due to the extra security magisk cant be flashed with the whole firmware no more, as each time you flash the firmware your back at square 1.
Note: You will need 7-zip - google is your freind
1. Download odin: https://odindownloader.com/download/odin3-v3-13-3.
2. download the latest stock firmware for your device via SamMobile
3. Download latest Magisk Manager - https://www.google.co.uk/amp/s/forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/amp/
4. Flash latest firmware via odin and let device boot up and finish setting up.
5. Grab Your Firmware AP_A105FXXXX.tar.md5 remove the md5 so its a tar file makes it easier to work with. Copy it to your device storage.
6. Install latest magisk manager, and open check advanced settings to make sure recovery is checked, select install image / patch image and select the AP file you put on your device, magisk will patch and save as magisk_patched on your internal storage. Copy this back to your pc and extract it.
7. Download this https://forum.xda-developers.com/attachment.php?attachmentid=4818715&d=1568308074 thanks to @droidzer1 and extract the vbmeta.img.
8. Make a new folder on you pc it's temporary so you know where your files are. From the Ap magisk_patch.tar you extracted, copy the boot.img, recovery.img, and the downloaded vbmeta.img from step 7. And place them in the new folder you created, using your mouse select all 3 and right click select 7-zip add to archive, select tar format and name it magisk.tar.
9. Now we have all the files ready back to your device, if your bootloader is already unlocked skip this step and move to the next. For those that havent unlocked there bootloader go to settings - about phone - Software Information - tap multiple times on "Build number" - This will open developer option.
Now in settings at the end, you will have new option "Developer options" - look for OEM unlocking - Enable it, if the OEM switch is not there proceed to step 10. If it is and you enabled it it might ask you to factory reset if not it will be this way to complete the unlock bootloader.......
switch off your device and reboot to download mode.
To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable
When device start to download mode, long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
10. Remove any account you have on your device go to settings, look for time and date automatic time zones, turn it off and set date back 8 days from now (example 30th today change date to 22nd) restart device. Now go straight back into automatic time zones settings and turn it back on. Again reboot device, when device reboots turn it off. You can now enter download mode and it should say checking instead of prenormal that means you good to go. Those of you that had no OEM switch in developer mode please now check.... if it's there enable it and go back to step 10 unlocking bootloader then proceed to step 11.
11. Open odin and select in the ap tab the magisk.tar you created earlier. Plug in your usb whilst holding vol-up and vol-down together to boot into download, press vol-up to proceed. Press start on odin and soon as it finishes and device reboots and you see the bootloader message hold power and vol-up until into stock recovery, select wipe factory reset then select reboot device, this the same as soon as you see bootloader unlocked message hold power and the vol-up together this time count to 7.... and release. Phone wont boot it will go blackscreen and reboot, dont worry this is normal, again do the exact same at bootloader unlocked msg screen hold power and vol-up count to 7... release, now phone will boot and you can set it up.
Note: you will need to reinstall magisk manager and on 1st open it will ask do to additional setup, let it do its thing, then device will reboot,
Remeber every time your device reboots you will have to do the power and vol-up to boot system with root.
I hope this guide help you and a big thank you to @afaneh92 for his original guide
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
tttt7hhhhjjjk said:
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
Click to expand...
Click to collapse
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
mikeyb123 said:
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
Click to expand...
Click to collapse
thanks for the fast reply man :good:
I gave up rooting this phone, ended up bootloop 3 times and always has to flash it to get the phone working again
timba123 said:
Any chimeratool tricks for no oem unlocking in developer options? On a102u1
Click to expand...
Click to collapse
no.. chimera tool cant unlock the bl on usa variants
hello Thanks for this method but not working after install again magisk manager , say app magisk is not installed and not root
When I was creating the magisk_patch file with magisk manager go to advanced settings and check recovery mode
is it correct?
It's my first post and my English isn't very good but I will try to do my best. If someone have problems tell me ^^.
IMPORTANT: NEVER TRANSFER IMPORTANT FILES USING MTP, USE ADB.
1. Download latest firmware using SamFirm and install it in your phone.
2. Extract from the AP the file "boot.img.lz4", transfer to your phone and extract it using ZArchiver. You will get a file "boot.img" .
3. Install Magisk Canary and patch "boot.img".
4. Transfer USING ADB the magisk_patched.img to your PC, rename to "boot.img" and compress it into a .tar called "boot.tar".
5. Unlock bootloader (there are so many tutorials in this forum, don't panic, it's very easy).
6. Untick Auto-Reboot in Odin and flash the "boot.tar", then reboot your device and, immediately, press Vol UP + Power to enter into recovery and erase all data (factory default).
7. Configure Android, install the Magisk Canary apk and let it do stuff. The phone will reboot and you have your phone rooted .
If reboot into recovery don't panic, just press reboot to system (it's normal).
DON'T USE REBOOT OPTION IN POWERMENU, YOU CAN LOSE ROOT, INSTEAD, USE POWER OFF AND THEN TURN ON THE PHONE.
Hi. I'm a newbie. I've got this new Samsung and it's first time rooting Samsung phones. I'm stuck at step 6. Odin says <ID:0/005> Can't open the specified file. (Line: 2006). What should I do? I mention I've put the "boot.tar" file into AP. Or how else should I flash with Odin?
EDIT: SOLVED! I had to run Odin as Administrator
Apps link aur file link
call recording
I need Call recording option
Hello,
I am sorry if this is annoying in any way. I have spent the whole day trying to figure out how to root my Samsung Galaxy A11 and already wiped it twice.
There is not TWRP custom recovery available for it. To my understanding so far, I need TWRP if I want to install custom ROMs. I really do not care about installing custom ROMs. I have been trying to figure out how to root using the stock ROM.
Everywhere I look it says that I need to patch the stock ROM before flashing it by patching the boot.img file in the stock ROM download. I have downloaded several GBs of ROMs over a very slow connection and none of them has the boot.img file. I have the tar.md5 files (AP, BL, CP, CSC) but not boot.img. How do I proceed in this situation?
My phone model: SM-A115F/DS
Baseband version: A115FXXU1ATG1
Country: Egypt
Any help will be much appreciated.
yomamabinlaggin said:
Hello,
I am sorry if this is annoying in any way. I have spent the whole day trying to figure out how to root my Samsung Galaxy A11 and already wiped it twice.
There is not TWRP custom recovery available for it. To my understanding so far, I need TWRP if I want to install custom ROMs. I really do not care about installing custom ROMs. I have been trying to figure out how to root using the stock ROM.
Everywhere I look it says that I need to patch the stock ROM before flashing it by patching the boot.img file in the stock ROM download. I have downloaded several GBs of ROMs over a very slow connection and none of them has the boot.img file. I have the tar.md5 files (AP, BL, CP, CSC) but not boot.img. How do I proceed in this situation?
My phone model: SM-A115F/DS
Baseband version: A115FXXU1ATG1
Country: Egypt
Any help will be much appreciated.
Click to expand...
Click to collapse
I have managed to find this saviour.
https://forum.xda-developers.com/showpost.php?p=79106875&postcount=6
I downloaded a random J6 firmware in another site.
You have to use 7zip software, it's free, much better than WinRar and supports tons of compression formats. Do these steps with 7zip:
-Unpack zip file.
-Rename the "*.tar.md5" to "*.tar".
-Open the ".tar" file and unpack "boot.img.lz4".
-Unpack "boot.img.lz4" file.
-It's done, you now have the "boot.img" file you were looking for
Click to expand...
Click to collapse
Just one thing to point out, 7zip did not work properly to extract the boot.img from boot.img.lz4. I used the solution in this answer. https://superuser.com/a/1533657
Now, let's see if I can patch the boot.img
How to ROOT and, but...
yomamabinlaggin said:
Hello,
I am sorry if this is annoying in any way. I have spent the whole day trying to figure out how to root my Samsung Galaxy A11 and already wiped it twice.
There is not TWRP custom recovery available for it. To my understanding so far, I need TWRP if I want to install custom ROMs. I really do not care about installing custom ROMs. I have been trying to figure out how to root using the stock ROM.
Everywhere I look it says that I need to patch the stock ROM before flashing it by patching the boot.img file in the stock ROM download. I have downloaded several GBs of ROMs over a very slow connection and none of them has the boot.img file. I have the tar.md5 files (AP, BL, CP, CSC) but not boot.img. How do I proceed in this situation?
My phone model: SM-A115F/DS
Baseband version: A115FXXU1ATG1
Country: Egypt
Any help will be much appreciated.
Click to expand...
Click to collapse
Hey there. I'm searchin' for TWRP for my A11 and no use.No one compile it and nobody can't write full f*****' guide how to build TWRP without any config file (or how to create 'em for building from 0). But honestly I'm not about TWRP.
Why do we need TWRP for Android 10!?
A: Samsung lock phones /system partition to Read-Only state. You can get root but you can't mount your partition as Read-Write, make changes in it. It's only waste of time.
How can I install ROOT for my samsung A**?
A: Very simple. I suggest you using Magisk Manager for it!
What do I need and what do I must do?
A:
1. You need unlock the bootloader of your phone (data will be lost).
2. You need original USB cable (from box of phone).
3. Yon need last firmware to your phone. (I'm using SamFirm or Frija)
4. Windows 7 or higher.
5. 7-Zip
6. Odin
How:
Stage I: Bootloader.
0. Remove all Google and Samsung Accounts
1. Make data backup (for recoverying)
2. Go to Settings -> Developer Options -> ADB Debug (set Enabled) (Search in web how to get Developer options Settings menu)
3. Go to Settings -> Developer Options -> OEM Unlock (set Enabled)
4. Turm off Phone and wait for 10 seconds.
5. Plug USB of Phone to your PC BUT PHON MYST BE UNPLUGGED!
6. Push and hold buttons: VOLUME UP and VOLUME DOWN and plug USB from PC to your Phone and still hold buttons!
7. When phon will be realy you'll see a light blue screen that ask you: Shall I unlock bootloader (Long press Volume UP), Shall I enter in download mode (short 'click' Volume Up) or I must turn off (Hold Volude Down)
8. Press and Hold VOLUME UP
9. On screen you'll se the message you'll unlock your bootloader... To hell Press POWER BUTTON.
10. Phone goes to reboot and start WIPING PROCESS!
11. That it. You unlocked bootloader. But will you install ROOT?
If so:
12. Make first setup of your phone but don't set google account and etc. Just make it working.
13. Go to Settings -> Developer Options -> ADB Debug (set Enabled)
14. Validate that's you've done everything right: Find OEM Unlock if toogle is gray and not responging to your actions then you've done right!
15. No download firware to your PC.
16. After you had downloaded firmware for your phone you'll fave few files you need file with prefix "AP_" open it with 7-Zip.
17. Get from it file: "boot.img.lz4" and put to some location at your PC.
18. Pack your "boot.img.lz4" with 7-Zip to "boot.img.lz4.tar" (YOU MUST USE *.TAR ARCHIVE TYPE)
19. Install Magisk Manager to your phone and put your archive "boot.img.lz4.tar" to location: Internal Memory/Download
20. Connect to WiFi and run Magisk Manager.
21. Make Kernel Patch with Magisk: Select: "Install Magisk" -> "Patch boot image" -> in file picker navigate and select "boot.img.lz4.tar"
22. (Magisk will do everything)
23. When it's done in folder "Internal Memory/Download" will be magisk_patched.tar copy it to your Windows.
24. (On PC) Run Odin as Administrator. And in tab "Options" unselect checkbox "Auto Reboot"
25. Turn off your phone and wait for 10 seconds, then Press and hold VOLUME UP and VOLUME DOWN and plug in your USB from PC to phone.
26. Phone will ask you what do need to do, just click VOLUME UP and you enter into Download mode
27. Odin must show you COM number.
28. Select as AP file "magisk_patched.tar" and press Start.
29. If you see PASS! in Odin - You've done! If ERR! then you failed to unlock the bootloader!
30. Now turn of fyour phone and enter into Recovery Mode (on turned off phone hold POWER + VOLUME UP)
30.a. If you failed to enter try in with ADB command: 'adb reboot recovery' (no quotes)
31. In Recovery Mode Make: Factory reset + Clear Cash partition.
32. Power on your phone. Again make FULL PHONE SETUP an reinstall Magisk Manager
33. PROFIT!
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
stylemonument said:
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
Click to expand...
Click to collapse
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Please see here: Bootloader Unlock Service For US Variants
BoiBundy said:
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Click to expand...
Click to collapse
Okay.... let me do that. Thanks.
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Msgd re: oem unlock! Btw, if we got any awesome Sam sec experts out there who wouldn’t mind entertaining some qs from me regarding a lot of WEIRD stuff happening w my phone, be eternally grateful. Could even work out a monetary deal for your time, and (perhaps) help!
Thanks much in adv, msg on telegram as @nemotheDreamer.
butchieboy said:
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
You might be right, I will edit it tonight
So we can legit root the Snapdragon version now?
Nickdroid86 said:
So we can legit root the Snapdragon version now?
Click to expand...
Click to collapse
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
cerj said:
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
Click to expand...
Click to collapse
Thanks man, wanted to have a central "fool-proof" way for people to enjoy the freedom of root
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
MonkeyJug said:
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
Click to expand...
Click to collapse
Check Here: https://forum.xda-developers.com/t/sampwnd-usa-model-bl-unlock-info-u-u1-w.4201689/
I've been on Nexus and Pixel devices so long now I cannot remember much about modification on Samsung devices. Last one I had rooted was the Note 2. Anyway, bootloader unlocked and successfully rooted my SM-N975U (Note 10+). Now there are updates available so I am sorry if this isn't the place or if a dumb question, but is there any special way I need to do updates on the snapdragon so I don't relock the bootloader or lose root? With Pixel, ADB sideload was easy, not sure with this one.
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
nabnab25658 said:
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
Click to expand...
Click to collapse
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Dick_Stickitinski said:
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Click to expand...
Click to collapse
Hey, just wanted to thank you for pointing me in the right direction. I've had my Sm-976V BL unlocked and rooted for a bit now, but have been busy hence the late reply.
I have an issue. I boot into TWRP just fine but all my files in sdcard are nothing but random numbers and letters
I think this happens when you don't wipe your data. You also need to flash a decryption file. It happened to me at first because I didn't wipe all data.[/QUOTE]
BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
which TWRP version to flash and which odin? hope i can get answer i had N975U1 unlocked bootloader
Anyone else getting that pesky "Android 11 Update" since they have rooted? I keep postponing it. I'm guessing it will fail if I try to install. Not sure what I should do.
Sammobile don't seem to have the firmware available yet. I was thinking installing it with odin then patching AP with Magisk
BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
it works on my N975U1 android 10 Q version 1st method so no need 2nd method