Download
RR-P-v7.0.0-20190124-amami-Unofficial
RR-P-v7.0.0-20190218-amami-Unofficial
XREN Kernel
TWRP 3.2.x-0
Magisk
GAPPS arm/9.0
AddonSU
INSTALLATION
1. Unlock bootloader
2. Install via fastboot boot.img
fastboot flash boot boot.img
3. install twrp recovery 3.2.x-0
fastboot commands fastboot flash recovery TWRP.img
4. Boot to recovery and wipe:
cache / dalvik
data
system
5. Install ROM
6. Install Gapps
7. Install XREN-kernel (optional)
8. Install SuperSU or Magisk
9. Done![/SIZE]
Credits
SpiritCroc: big thanks to him for maintaining the device trees
115ek: thanks to him for local manifest
rcstar6696
SuperLamic
drakonizer
AdrianDC
munjeni: thanks for tips and tricks
nailyk: thanks for tips and tricks
All the other contributors on sony msm8974 platform
LineageOS team
Click to expand...
Click to collapse
Local manifest - how to build...
XDA:DevDB Information
Resurrection Remix 7.0.0 for Amami, ROM for the Sony Xperia Z1 Compact
Contributors
raschad
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 3.x.x
Based On: LineageOS 16.0
Version Information
Status: Beta
Beta Release Date: 2019-01-24
Created 2019-01-24
Last Updated 2019-02-17
Changelogs
24.01.2019
- initial release
17.02.2019
- Update from source
- Camera focus button to wake up
- Stereo speaker mod
I think it's good practice to mention the people that made your work possible. It's a bit unfair to perform like it's completely your work.
The well-kept repos from AICP (thanks @SpiritCroc and a lot of others before) first enabled us to build other android 'flavours' so quickly and with so less effort.
Open source isn't just taking - it's also giving. And even if it's only some credits.
By the way: It would be just fair to give something back if you fix some problems by submitting it to https://gerrit.aicp-rom.com
Good luck.
115ek said:
I think it's good practice to mention the people that made your work possible. It's a bit unfair to perform like it's completely your work.
The well-kept repos from AICP (thanks @SpiritCroc and a lot of others before) first enabled us to build other android 'flavours' so quickly and with so less effort.
Open source isn't just taking - it's also giving. And even if it's only some credits.
Click to expand...
Click to collapse
You're right! All this is possible thanks to @SpiritCroc and the team AICP
Tested and working fine. Thanks all involved people for their effort to keep phone up to date.
Thanks for building RR7! Is anyone running this as a daily driver? If so, can you confirm that bluetooth is working? Thanx again
Ænimal said:
Thanks for building RR7! Is anyone running this as a daily driver? If so, can you confirm that bluetooth is working? Thanx again
Click to expand...
Click to collapse
Tried since yesterday as daily driver. Bluetooth working, at least with my car. Wifi 2.4 and 5Ghz also working (not tested high channels). Camera works as in most other roms (lineageos camera), and GPS works fine, so, as far as I've tested, all is working (NFC not tested)
One annoying thing is that volume buttons only change multimedia volume, and an icon appears to switch ringer from vibration to sound or no sound. It's not an issue, as this behaviour comes directly from android 9 itself, who changed the way this works. Under RR setting you can make a full panel appear.
And may be due to this, Volume settings are a bit messed, with ring and notifications icons/sliders somehow swapped and a strange behaviour when moving them individually. Seems that there is something wrong there.
Otherwise, nice ROM, very similar to AICP.
Hallo.
Very excelent ROM! Everthing works. Sound setings must set on ROM setings, i set slider for bell, ring, multimediaand phone. Up the slider is button to switch to silent mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I flash another kernel- RZ . XRen kernel litlle batery drain in my Z1C. RZ kernel i set in Kernel Adiutor and now very good energi optimization and batery saver!
With RZ kernel fully work double tap to sleep and double tap to wake - wau!
Good work! Now my Z1C have 2019 facelift
Hallo.
AnTuTu:
Mark
Flashed this ROM today; didn't do much in it, just tested a few things. What I tried was working very well. Got extremely fast GPS fixes.
Many thanks to everyone involved for your efforts! :good::good:
There's only one thing I couldn't get to work: I tried to flash rashad's RZ Kernel V 3.0.2 with the result that my phone wouldn't boot anymore, neither into system nor into recovery. I tried several options but none worked. After each failed attempt I had to re-flash twrp through fastboot as it is described here
1.: flashed ROM + kernel + openGapps 9 pico + Magisk V 18 (in that order) >> no boot into system possible, didn't get past some initial background illumination (no bootlogo or whatever, no LED)
2a: flashed ROM + openGapps 9 pico + Magisk, then booted into system >> OK
2b: booted back into recovery, flashed kernel from zip + Magisk (in that order) >> no boot into system, see #1
3a: repeated 2a >> OK
3b: repeated 2b, but without flashing Magisk >> no boot into system, see #1
While flashing the kernel there aren't any error messages etc.
I admit that it's been quite a while that I last flashed a custom kernel, and that's been a completely different device. So I assume that I'm doing something wrong here.
Hallo.
Unlock bootloader, instal TWRP 3.2.1, wipe, instal ROM, Gaps, kernel and Magisk. No problem.
After reflash Xren kernel to RZ kernel must wipe.
Mark
Markusenka said:
Hallo.
Unlock bootloader, instal TWRP 3.2.1, wipe, instal ROM, Gaps, kernel and Magisk. No problem.
Click to expand...
Click to collapse
that's how I did it: bootloader is unlocked since 18 months or so, currently am running LOS 15.1 unofficial; TWRP 3.2.3 is installed to FOTAKernel already.
I always wipe cache, Dalvik/Art, System and Data before I flash a different ROM.
Did the rest as you wrote.
Markusenka said:
After reflash Xren kernel to RZ kernel must wipe.
Click to expand...
Click to collapse
Question is: what should I wipe if I flash a different kernel only onto an existing ROM without destroying vital parts of the ROM?
Hallo.
I am reflash more times from Xren to RZ kernel and RZ to Xren for testing. I am flash new kernel and wipe cache and dalvik. After restart, phone normal boot to system.
I have litlle problem with recovery. It is diferent two bootkoader on xperia Z1C and more then two TWRP.
Markusenka said:
Hallo.
I am reflash more times from Xren to RZ kernel and RZ to Xren for testing. I am flash new kernel and wipe cache and dalvik. After restart, phone normal boot to system.
I have litlle problem with recovery. It is diferent two bootkoader on xperia Z1C and more then two TWRP.
Click to expand...
Click to collapse
Strange! Tried again one hour ago, and again no chance to boot into system. After waiting for 5 minutes I gave up, now I'm back at LineageOS 15.1 with standard kernel and twrp installed in FOTAKernel (at least that's what I think)
Hy!
I set government CPU and GPU to Perfomance and now here is final test. Phone is not hot. Again, thank you for this ROM.
Mark
Hi @raschad,
first of all, thank you for your effort spent in this ROM.
I've tested it for three days on my device and - wow - this is very promising! Slick and responsive UI, overall performance is great. All phone features working like a charm.
Nevertheless, I encountered following issues:
Same as for user @lm089, I cannot boot with RZ kernel installed (thank you for your hint using fastboot to get back into recovery). Thus, I tested the ROM with the kernel it originally ships.
I use my phone as alarm clock. At night it is turned into flight mode. But while in flight mode, scheduled alarms won't wake the phone and play sound. Instead, when manually waking the phone after the scheduled alarm, there is a notification stating a "missed wakeup call". Not very helpful
Without flight mode, alarms are firing fine. Maybe this is some kind of "do not disturb" feature automatically activated within flight mode?
One morning, when manually waking the phone, it showed a quick "shutting down" message and turned off. Battery was >50% the night before, but now the phone was 'dead'. Needed 20 minutes charging prior willing to boot.
This battery drop issue occurred just once.
Two times, after waking the phone, display was completely unresponsive for touch input. Hardware buttons still working, but even putting the phone back in standby and waking again doesn't get the touch input back working -> hard reboot needed.
When configuring the camera app to store images onto external SD card, it stores pictures into /sdcard/Android/data/org.lineageos.snap/files. Pictures won't show up in gallery afterwards, as there is a .nomedia file present.
For now I'm back at Oreo which is very stable for me. But I'm eager for this great ROM. Feels great on a five years old device to have bleeding edge software running that smooth.
Please let me know if you need any further information or other support in order to track these issues down.
Looking forward to test any future releases!
Kind regards,
Simon
Hi again,
I've tested the RZ3.5 kernel with this rom (just installing it under TWRP), and I've to say that it worth the improvements. The overall feeling of performance is similar or better, but the real improvement is in battery duration. Actually I've a quite old battery installed, that gives me about 16h of working time. With RZ I'm getting consistently more than 24h. Tested during some days and it's an improvement of more than 50% in battery life, some days even about 100% improvement. Impressive.
So, the overall impression is quite nice. Phone is very responsive, and battery lasts enough... seems almost a new phone. Thanks all involved
Would you mind posting some of your kernel adjustments? Or do you just go with the kernel's standard settings?
lm089 said:
Would you mind posting some of your kernel adjustments? Or do you just go with the kernel's standard settings?
Click to expand...
Click to collapse
Just standard settings
17.02.2019
- Update from source
- Camera focus button to wake up
- Stereo speaker mod
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INFORMATION,
First AOSP NOUGAT based builds for Xperia Z2 Tablet.
Disclaimer
We are not responsible for anything that may happen to your device . We ask that you do your part to know your device and know how to recover from problems before you flash!
BUGS
1. Camera Foucs unclear & Dark camera.
All other seems to Work for now.
Please let me know if you find more Bugs!!!
INSTRUCTIONS
Download Rom, Recovery & Gapps First & Unlock Bootloader
1. Download ROM Castor SGP521 (LTE)
--Download ROM Castor-Windy SGP511, SGP512 (WIFI)
2. Download OPENGAPPS
3. Flash the Boot from ROM via fastboot (fastboot flash boot pathTo/boot.img)
4. Flash TWRP Recovery 3.0.0-0 via fastboot too (fastboot flash recovery pathTo/recovery.img)
5. Boot into Recovery by using VOLUME UP when Sony logo comes up with pink notification light.
6. Wipe SYSTEM, DATA, DALVIK, CACHE from recovery.
--- 6.1 If you Update the ROM skip 3,4 & 6.
7. Flash the Rom zip and Open Gapps zip from Recovery.
8. Reboot.
(Optional)
9. Root Direct Download
10. Flash SU zip via recovery.
11. Reboot.
Changelogs :
Build 18/02/2017
- New blobs from sony
- Call Echo Fixed
- Camera crash fixed
- Latest security patch
Build 09/11/2016
- Google release 7.1_r7
- November Security patch
- new charger driver
Build 31/10/2016
-Camera fix (half green is gone)
-Nfc is fixed
-Update interactive gov
-Fix charging bug
-Unify sound Implementation
-Rework panel Implementation
Build 21/10/2016
-Android 7.1.0_r4 release
-Some camera commits
-Removed fm radio (causes deep sleep problems)
-Night display enabled
Sceenshots :
FAQ :
Q- Can i install it on locked bootloader?
A- No.
Q- Which gapps should be used?
A- OpenGapps arm 7.1 Full
Q- How to install this rom?
A- Read first post.
Q- Is camera working?
A-See the bugs listed above.
Q- Something* is not working.
A-Report bugs on github or here when it is not listed above.
Q-Battery draining quickly.
A-There is miscellaneous battery drain.Else no issue with battery.
CREDITS
AOSP/Google
Sonys Open Device Program
Sources
Google
Device Tree (Castor Windy-WIFI)
Device Tree (Castor-LTE)
Kernel tree
Vendor Tree
XDA:DevDB Information
Android Open Source Project [Nougat], ROM for the Sony Xperia Z2 Tablet
Contributors
rcstar6696, akshay2shah
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP
Version Information
Status: Alpha
Created 2015-10-29
Last Updated 2017-04-11
reserved
reserved
Recovery Installation
Recovery is only available if your build is v21 or newer!
1. Download the Recovery Image from Mega folder of your device (Recovery Folder)
(Castor=LTE and Castor-windy= Wifi only)
2. Reboot your device to bootloader
3. connect your device with your pc
4.Use fastboot to flash recovery with this commando:
Fastboot flash recovery PATH TO RECOVERY FILE
(Don't forget to press enter )
5. Unplug device
6. Turn on device
7. if the device reaches sony logo the notification Led turns on (pink)
8. press volume up while led is pink (led changes colour to orange if you press correctly)
9. Device should show Recovery now
Enjoy AOSP on Z2 Tablet
V2 is Online
add support for Castor (LTE)
Audio is fixed
Video works now but with wrong colour calibration
Ant*+ Support
Selinux is active
ZIP Package
I uploaded the flashable zip but you can only use it if you upgrade from the first version. if its your first flash use the Images Report back please !!
O-oh, nice! What a treat to try on my tablet
So, a couple of questions prior to installation
1) Right now I have an Android 5.1.1 stock pre-rooted firmware. If I install this - does it overwrite the recovery in the process or does it only touch the system and the kernel partitions? I wouldn't want to lose my XZDualRecovery setup with TWRP
2) by Video not working - do you mean the recording or playing a video? I.E. does it affect apps like Twitch and YouTube video playback?
Fatal1ty_93_RUS said:
O-oh, nice! What a treat to try on my tablet
So, a couple of questions prior to installation
1) Right now I have an Android 5.1.1 stock pre-rooted firmware. If I install this - does it overwrite the recovery in the process or does it only touch the system and the kernel partitions? I wouldn't want to lose my XZDualRecovery setup with TWRP
2) by Video not working - do you mean the recording or playing a video? I.E. does it affect apps like Twitch and YouTube video playback?
Click to expand...
Click to collapse
1) first you need to unlock your boot loader but anyway you will lose xz dual recovery. Recovery will be overwritten and a complete New kernel is needed ( Linux kernel 3.1). The boot.img from aosp build includes this.
2) Sorry i mean video playback, but if you play Videos with MX player or vlc it will work correct if not you will have confuesed colours
Video recording will not work due the camera.
Hmm, okay. So I should be able to get TWRP back via NUT's kernel builder on his website
Another question - you said that optionally I can use the boot.img you linked in the Optional section (instead of the one that comes with the ROM) - does that mean that the ROM-included boot.img does not allow the device to be rooted? (due to SELinux, I suppose)
Fatal1ty_93_RUS said:
Hmm, okay. So I should be able to get TWRP back via NUT's kernel builder on his website
Another question - you said that optionally I can use the boot.img you linked in the Optional section (instead of the one that comes with the ROM) - does that mean that the ROM-included boot.img does not allow the device to be rooted? (due to SELinux, I suppose)
Click to expand...
Click to collapse
This could be possible that it work with his kernel builder i haven't test it
Edit: Kernel build with nuts builder is successfull but you won't have recovery. I tested it
Don't use the optinal boot.img. your device will not Boot.The first image is an old Boot.img Form kit kat which has recovery included. First flash the first image than Boot to recovery than flash Boot.img from rom again
No the kernel supports root but the Problem is that you don't have a recovery. You need it to flash super su.
hey @rcstar6696, Installed the ROM just a few moments ago. Enjoying it so far! Some feedback:
1) The installation went through very smoothly, like I have a Nexus device
The "Flash ROM -> flash KK kernel -> Flash SuperuSU -> Flash MM kernel" went okay as well, no issues, just a little extra step to gain root until we have XZDR for Android 6.0
2) The ROM booted up SUPER FAST for the first time. Sony's firmware usually takes at least 2-3 minutes to boot up fully from a shutdown state, while this ROM booted up in less than like 30 seconds. Very refreshing to see such short booting times!
3) The backup restoration process seemed to not have gone through fully. Only about half of the apps I had were restored. Not really much of an issue, just a personal observation
Also after confirming what apps I wanted to restore, the setup wizard stayed at the "Please wait..." screen, so I had to manually quit to the homescreen via the Home button. Seems like a bug to me? Or maybe it's the built-in GAPPS that's the issue (haven't tried flashing a GAPS package manually though)
4) The system seems to not recognize my SIM-card for some reason. It just tells me "No SIM card installed", which is weird considering that the ROM is for the LTE version. Tried turning on and off the Airplane mode to reset the modem - no result. Tried rebooting the device - also n result.
Maybe try to look at Sony's official binaries for Tab Z2? http://developer.sonymobile.com/downloads/tool/software-binaries-for-aosp-m-android-6-0/
5) Like you said, the video playback is all green/purple artifacted. Wonder if it's the drivers/libraries issue, as I have a Marshmallow based ROM on my Nexus 4 and it doesn't seem to have such issues. Too bad, but hopefully this can be fixed in the future builds! (as I often watch YouTube videos). Any app that uses it's own internal player seems to work fine, though, such as Twitch
6) The multiwindow... kinda works. If you have two apps side by side - seems to function well. Anything beyond that - turns the screen into a mess. Dunno if it's because of the ROM itself or because of the feature, but at least it's kinda available here. Besides, can't really complain about an unfinished feature
Also, the Play Store app looks pretty awful using the Multiwindow, maybe it's not adapted accordingly by Google
7) The sound in this ROM is SUPER LOUD. It's nowhere near this level of volume on the stock ROM. I dunno if the audio balancing is wrong here or if it's supposed to be this way, but it's definitely at least twice as loud as official Sony's 5.1.1 firmware
8) Merging the SD card with the internal storage of the tablet went fine, and I seemed to have no issues transferring the data
9) Minor things:
- The "About this tablet" screen still says "Sony Xperia Z2 Tablet WiFi" despite flashing the ROM on the LTE version
- The text in Bluetooth screen when it's off seems to be aligned to the left, looks weird
10) The SuperSU works fine, apps have no issues requesting permissions nor does SuperSU have any issues granting said permissions to the apps on its own
And I that's it. If anything else surfaces - I'll let you know
Thanks for continuing to build 6.0 AOSP roms for castor_windy ! My computer died so I can't compile anymore atm, I'm glad someone else is doing it !
Fatal1ty_93_RUS said:
hey @rcstar6696, Installed the ROM just a few moments ago. Enjoying it so far! Some feedback:
1) The installation went through very smoothly, like I have a Nexus device
The "Flash ROM -> flash KK kernel -> Flash SuperuSU -> Flash MM kernel" went okay as well, no issues, just a little extra step to gain root until we have XZDR for Android 6.0
2) The ROM booted up SUPER FAST for the first time. Sony's firmware usually takes at least 2-3 minutes to boot up fully from a shutdown state, while this ROM booted up in less than like 30 seconds. Very refreshing to see such short booting times!
3) The backup restoration process seemed to not have gone through fully. Only about half of the apps I had were restored. Not really much of an issue, just a personal observation
Also after confirming what apps I wanted to restore, the setup wizard stayed at the "Please wait..." screen, so I had to manually quit to the homescreen via the Home button. Seems like a bug to me? Or maybe it's the built-in GAPPS that's the issue (haven't tried flashing a GAPS package manually though)
4) The system seems to not recognize my SIM-card for some reason. It just tells me "No SIM card installed", which is weird considering that the ROM is for the LTE version. Tried turning on and off the Airplane mode to reset the modem - no result. Tried rebooting the device - also n result.
Maybe try to look at Sony's official binaries for Tab Z2? http://developer.sonymobile.com/downloads/tool/software-binaries-for-aosp-m-android-6-0/
5) Like you said, the video playback is all green/purple artifacted. Wonder if it's the drivers/libraries issue, as I have a Marshmallow based ROM on my Nexus 4 and it doesn't seem to have such issues. Too bad, but hopefully this can be fixed in the future builds! (as I often watch YouTube videos). Any app that uses it's own internal player seems to work fine, though, such as Twitch
6) The multiwindow... kinda works. If you have two apps side by side - seems to function well. Anything beyond that - turns the screen into a mess. Dunno if it's because of the ROM itself or because of the feature, but at least it's kinda available here. Besides, can't really complain about an unfinished feature
Also, the Play Store app looks pretty awful using the Multiwindow, maybe it's not adapted accordingly by Google
7) The sound in this ROM is SUPER LOUD. It's nowhere near this level of volume on the stock ROM. I dunno if the audio balancing is wrong here or if it's supposed to be this way, but it's definitely at least twice as loud as official Sony's 5.1.1 firmware
8) Merging the SD card with the internal storage of the tablet went fine, and I seemed to have no issues transferring the data
9) Minor things:
- The "About this tablet" screen still says "Sony Xperia Z2 Tablet WiFi" despite flashing the ROM on the LTE version
- The text in Bluetooth screen when it's off seems to be aligned to the left, looks weird
10) The SuperSU works fine, apps have no issues requesting permissions nor does SuperSU have any issues granting said permissions to the apps on its own
And I that's it. If anything else surfaces - I'll let you know
Click to expand...
Click to collapse
1) at the moment we we don't have a change for working recovery i tested some more things
2) same here :good:
3) i have no problem while restoring aps via ti only the google apps i can't restore all other work
4) my fault i forgot to add the castor link sorry i will do it in 5 min than your sim will work but you need to configure your apns by yourself
5) i think this is a driver issue we had the same **** on aosp l and we use the same driver
6) multiwindow is buggy but its not a full feature of android m its only for testing
7) ok never tested it on full loud
8) yes sdcard is a little bit confuesd now due the new encripton from google
9) sorry you need to flash system and boot.img again but the correct one than all will be good i will add the link
Btw v3 is uploading at the moment
The bluetooth text is not our fault this is from google
basic086 said:
Thanks for continuing to build 6.0 AOSP roms for castor_windy ! My computer died so I can't compile anymore atm, I'm glad someone else is doing it !
Click to expand...
Click to collapse
Yes no problem i build it before you released it too but i won't release it with the internal storage bug
V3
Small Update
fixes some small Sensor bugs but the Lightsensor is not fixed :crying:
It should be up in the next half an hour
rcstar6696 said:
Small Update
fixes some small Sensor bugs but the Lightsensor is not fixed :crying:
It should be up in the next half an hour
Click to expand...
Click to collapse
Excellent, pulling now, will report anything interesting found. Is there anything in particular you want battle tested?
NOTE: Mega is pretty slow atm, so it may take awhile..160k over vpn on a 350Mb connection. AFH for future updates maybe? 2hr download to get the 1.2gb file. If not maybe consider zipping up the sparse image files to cut the upload/download times.
Do you think this can work on a z3 tablet? according to gsmarena they have kind of the same specs: same resolution, same cpu (MSM8974AB), 3gb ram, even the cameras (8.1 and 2.2mpx)
dnnz said:
Do you think this can work on a z3 tablet? according to gsmarena they have kind of the same specs: same resolution, same cpu (MSM8974AB), 3gb ram, even the cameras (8.1 and 2.2mpx)
Click to expand...
Click to collapse
I think not z3 tablet uses msm8974AC and has other device configs too. Don't flash it
i fixed the lightsensor now he is working
i think i will make a flashable zip for it
Lightsensor fix
Link to flashable zip https://mega.nz/#!LdBzHaQC!uiZIrU-eoI3Lriczk_em2vCXNNZVQ-tX17kcw5F7LWQ
This package includes older sensor moduls and some files but this will fix light sensor
Next build will include the patch but for now use the fix.
Installation is like super su or root
Flash old kernel
Reboot to recovery
Flash lightsensor fix.zip
Reboot to bootloader
Flash M-Kernel ( boot.im)
Reboot and enjoy
Have you noticed the battery drain during deep sleep ? It's called Miscellaneous in the battery stats, I wonder what it could be ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an operating system based on Android Open Source Project, built with a unique look and performance in mind. It's daily usage ready, lightweight and elegant.
RevengeOS need developers, a developer that have a good knowledge of Android and Java, have the desire to be innovative, and a mad developer
Think you're good enough? Contact us via email!
Email: [email protected]
FEATURES
RevengeOS exclusive features:
- Battery health checker
- Brand new RevengeUI, built to be different, built to be elegant
- Brand new media controller
- Systemwide gradients
- New lock screen clock styles
General features:
- In call haptic-feedback
- Kill app button
- Toggle battery percentage in status bar
- Resume media from Quick Settings
- Playback control from volume buttons
- Wake up with volume buttons
- Quick camera launch from sleep
- 3-button navigation system
- Pill navigation system
- Swipe to screenshot
- Wake on charge
- Proximity sensor check when waking up
- Systemwide sensor block
- And so much more!
DOWNLOAD
Chiron tap here
INSTALLATION
- Boot into your recovery
- Wipe system, vendor, data, dalvik-art cache, cache
- Flash RevengeOS build
DONATE
Support this project by donating here!
You can also support me as maintainer by donating here!
Sources
ROM: https://github.com/RevengeOS/
Kernel: https://github.com/AOSP-11/kernel_xiaomi_msm8998
Created 2020-11-01
Last Updated 2020-01-03
Do you wanna see a cute cat :3 ?
Meow me
Great !!! Thanks
works great, nickgapps worked, thanks
Good effort. Working well. Are you.planning to add custom features to.this ROM later?
Thanks a lot, will try it later. Great job.
Hey, how's the battery life compared to the latest MIUI or other ROMs?
EdiMaster said:
Hey, how's the battery life compared to the latest MIUI or other ROMs?
Click to expand...
Click to collapse
I do 6h on sot
I've got only 3h sot on this rom, miui 12 global stable 4h, probably battery problem, never changed, it's past more than 2 years
igorass91 said:
I've got only 3h sot on this rom, miui 12 global stable 4h, probably battery problem, never changed, it's past more than 2 years
Click to expand...
Click to collapse
How long have you been on RevengeOS? A few days? I'm sure you know this but I don't pay any attention to battery stats until 3-4 complete cycles after I install a new setup. Wait for everything to settle and stats to become accurate.. My battery on my chiron is definitely overdue for a swap. Sometimes I get average decent battery and other times it's half that. Picked up my device used off swappa about a year ago and i had it a few weeks and battery started to deteriorate more and more.
This rom is great btw op!! At the stage RevengeOS is currently at, being just upgraded to Android 11 it sort of reminds me of Decendants UI wise. Awesome work though thanks for bringing some A11 love to chiron.
(Edit)
Sent from my OnePlus 6t, Corvus rom
flash713 said:
How long have you been on RevengeOS? A few days? I'm sure you know this but I don't pay any attention to battery stats until 3-4 complete cycles after I install a new setup. Wait for everything to settle and stats to become accurate.. My battery on my chiron is definitely overdue for a swap. Sometimes I get average decent battery and other times it's half that. Picked up my device used off swappa about a year ago and i had it a few weeks and battery started to deteriorate more and more.
This rom is great btw op!! At the stage RevengeOS is currently at, being just upgraded to Android 11 it sort of reminds me of Decendants UI wise. Awesome work though thanks for bringing some A11 love to chiron.
(Edit)
Click to expand...
Click to collapse
That's right, this rom is great, however I've found probably a bug, after instal gcam, back camera starts buzzing and the photos which were take are shaked, but not all the time, when it's start buzzing on gcam, I found that every app using camera had this problem, it's looks like hardware issue, but on miui I haven't experienced something like this. Today I'm flashed miui because not only low sot I've got, battery charging slower than usual in miui, next thing is notification led, it's to bright for me, and camera flashlight is to yellowish and to low in my opinion, for now I've wait for next versions
What gapps have you got guys? I've tried nikgapps but I couldn't get the rom to boot with omni and higher, it went straight to the recovery. (core & basic worked)
EdiMaster said:
What gapps have you got guys? I've tried nikgapps but I couldn't get the rom to boot with omni and higher, it went straight to the recovery. (core & basic worked)
Click to expand...
Click to collapse
I actually used the NikGApps Omni package. I wiped data, vendor, system, and cache in Orange Fox recovery v11 beta then flashed RevengeOS 4.0 , flashed NikGApps-Android 11-Omni 10/10/2020 package, reboot system. Booted right up for me.. Attached a screenshot of gapps I used.
Sent from my OnePlus6T using XDA Labs
flash713 said:
I actually used the NikGApps Omni package. I wiped data, vendor, system, and cache in Orange Fox recovery v11 beta then flashed RevengeOS 4.0 , flashed NikGApps-Android 11-Omni 10/10/2020 package, reboot system. Booted right up for me.. Attached a screenshot of gapps I used.
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
Hmm, I've tried the 25.10 only, and I'm still using somewhat old twrp so maybe that's the problem.
EdiMaster said:
Hmm, I've tried the 25.10 only, and I'm still using somewhat old twrp so maybe that's the problem.
Click to expand...
Click to collapse
When I saw your post about the NikGApps omni I was like I swear that's what I used when I installed... I keep all my zips on USB thumb drives so I was able to confirm that I did use the Omni NikGApps_11-gapps. Weird. Maybe something in the app packages, who knows but my phone booted afterwards like it normally does... If you try Orange Fox recovery, if you don't want to install recovery there's a recovery.img inside the v11 beta installer zip that you can use and just do fastboot boot recovery.img from your PC and it'll boot recovery. I assumed that's what it was after unpacking the zip after another user asked if it could be booted and not installed using the recovery.img and I sent the command and it booted fine.
Really cool that we have an Android 11 rom for chiron!! :good:
Sent from my OnePlus6T using XDA Labs
flash713 said:
I actually used the NikGApps Omni package. I wiped data, vendor, system, and cache in Orange Fox recovery v11 beta then flashed RevengeOS 4.0 , flashed NikGApps-Android 11-Omni 10/10/2020 package, reboot system. Booted right up for me.. Attached a screenshot of gapps I used.
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
HI,
gapps 11 install before or after starts system ?
Pass safetynet? Netflix in PlayStore?
aureliolage said:
HI,
gapps 11 install before or after starts system ?
Click to expand...
Click to collapse
How I installed:
boot orange fox v11 beta recovery
Wipe data, system, cache, vendor
Flash RevengeOS
Flash NikGApps 10/10/2020-omni-Android-11
Reboot system
luistro said:
Pass safetynet? Netflix in PlayStore?
Click to expand...
Click to collapse
I don't think mine passed but you can just get netflix apk off apk mirror and side load it or make a backup of it using swift backup and restore it?
Sent from my OnePlus6T using XDA Labs
luistro said:
Pass safetynet? Netflix in PlayStore?
Click to expand...
Click to collapse
Use magisk hide
bug report: connot quick charge. I tried genuine & third, same problem
igorass91 said:
That's right, this rom is great, however I've found probably a bug, after instal gcam, back camera starts buzzing and the photos which were take are shaked, but not all the time, when it's start buzzing on gcam, I found that every app using camera had this problem, it's looks like hardware issue, but on miui I haven't experienced something like this. Today I'm flashed miui because not only low sot I've got, battery charging slower than usual in miui, next thing is notification led, it's to bright for me, and camera flashlight is to yellowish and to low in my opinion, for now I've wait for next versions
Click to expand...
Click to collapse
That is hardware issue (most likely due to the dirty lenses) like you said My Mix 2 had this from the beginning, didn't matter what ROM i was using, but as I'm not really guy who takes a lot of pictures it didn't really bother me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download)
Gapps (Download)
Recommended Micro or Nano Gapps
Magisk 20.0 or newer for root (after first boot) - (Download)
First time installation:
Backup your data to PC // If Something Goes Wrong
Flash recovery and boot to recovery
Wipe system, data, cache and format data, then reboot to recovery
Copy crDroid and Gapps to internal memory then flash them in TWRP in same order
Reboot and enjoy
Optional reboot again after first boot to flash Magisk for root
Update installation:
Boot to recovery and make a backup
Wipe system and cache
Flash updated crDroid and Gapps (and Magisk if you had this as root method)
Reboot and enjoy
For Encryption:
- First Take Backup Recommended
- Update Recovery Supports Encryption(Download)
-Reboot To Recovery
-Flash the ROM
-Flash Gapps
-Flash Magisk (optional)
-Format Data
-Reboot
(Do not set any password except None or Swipe to Unlock)
(Due to Secure Boot Issue You will get Bootloop)
Sources:
ROM: https://github.com/crdroidandroid
Kernel: (4.4.205)LineageOS+
Download:
ROM Download | Mirror
Encryption Build Download | Mirror
Encryption Build is not Recommended If you want to use Fingerprint and Face Unlock
Changelog: Here
Known issues:
Secure Boot (For Encryption build only)
Let Me Know More
Visit official website @ crDroid.net
SpideyGoku
crDroid Community Telegram
Donate to help our team pay server costs
Paypal MeThanks to:
@DD3Boh
@dmd79
For their work on z2 plus trees
If I forget to mention someone please let me know
Special Credits:
@Bas_NoVolte for helping me resolving issues.
Thanks a ton for letting this device have a fresh breath with Android 12. Hoping to see stable builds in the future with updated crdroid versions. Keep up the great work. Appreciate your efforts. @rajatsinghsp (spideygoku)
In my ZUK Z2, RoarTheGapps_20211207 which you provided in G apps link in crDroid v8.2, is installed in twrp but after boot there is no any apps related to Gapps only stock apps showing
Pretty much awesome and cool. Thanks a ton for bringing 12 to this lovely device
好家伙！爱了爱了！
Great to see the crdroid 8.4 (android 12.1) build for Lenovo Zuk Z2Plus. Appreciate your efforts.
Can you add 'disable U Touch' or all the customisation for U Touch? I mean I like the touch disabled and button working.
Also Bluetooth calling is bugged, cannot hear audio while in call. Audio FX is not working at all. Please use Fixy 4.4 vendor kernel, its working much better than stock, battery life and temperatures are under control.
Hello,
Thank you for your work.
Android Auto doesn't work I tried different gapps, crDroid 8.4, 8.2.
Now I installed crDroid 7.17 and It work fine.
Regards,
Continues boot looping, help.
LineArc said:
Continues boot looping, help.
Click to expand...
Click to collapse
Have you done the installation based on the 1st post (please see below)? On the other hand, you tried to do update from a different OS, or does your Zuk have had at least a Zui 3.5 installed before you try to install this OS? To be honest, I prefer clean installation any time I try an OS, to avoid problems, doesn`t mean I`ll not encounter any problem, but it`s reduced. On the other hand, if I know well then older Zui versions are not suitable to use newer OS`s (newer than Android 9 or Android 10).
First time installation:
Backup your data to PC // If Something Goes Wrong
Flash recovery and boot to recovery
Wipe system, data, cache and format data, then reboot to recovery
Copy crDroid and Gapps to internal memory then flash them in TWRP in same order
Reboot and enjoy
Optional reboot again after first boot to flash Magisk for root
What version does call recording work in?
mine is constantly rebooting (boot loop). recovery could be accessed but somehow i cant get it to boot. it was working fine until I installed gcam and now it is not. any help
Thanks for the rom. I am having issues. My phone is heating and restarting often.When not in use nothing happens,but the battery goes down faster even when not in use.Hope you can help me out. I flashed the rom exactly according to the instructions given.
Reverted back to crdroid version 11 and works well without any restarts or massive battery drain. Hope you can look into this issue. Thanks
is this build having any bugs ?
audio effects broken(no dsp will work); drain seems ok; heating normal for this phone
BTW on 8.5 2022-05-15 build
1) Audio is dead in any type of Call (Phone call, Discord, WhatsApp Call) over bluetooth. Also there is a bug when I connect to discord call while using earphones over audio jack, the audio has super heavy bass and left sided, it can be fixed when you disconnect call and play video and while it plays you connect to the call.
2) FlameGapps installs Wallpaper & Styles app and when you open it to change wallpapers from the launcher or any other options it crashes. Forced to use from settings.
3) Builds would get better if integrated Google apps so that we don't need alternatives like Miui trash apps. Or make seperate non-gapps variant of builds.
4) CPU is set to Interactive which makes it run hot. A better kernel governor is needed for better battery as this phone is so old I can't keep replacing battery every 3 months.
Havok19111 said:
1) Audio is dead in any type of Call (Phone call, Discord, WhatsApp Call) over bluetooth. Also there is a bug when I connect to discord call while using earphones over audio jack, the audio has super heavy bass and left sided, it can be fixed when you disconnect call and play video and while it plays you connect to the call.
2) FlameGapps installs Wallpaper & Styles app and when you open it to change wallpapers from the launcher or any other options it crashes. Forced to use from settings.
3) Builds would get better if integrated Google apps so that we don't need alternatives like Miui trash apps. Or make seperate non-gapps variant of builds.
4) CPU is set to Interactive which makes it run hot. A better kernel governor is needed for better battery as this phone is so old I can't keep replacing battery every 3 months.
Click to expand...
Click to collapse
I faced no issue with my z2 plus so far with this rom, my z2 plus is 5 years old and I've not done any battery replacement yet
I was on Android 12 Xtended rom then first I flashed latest twrp available officially here for z2 plus
Download twrp-3.6.2_9-0-z2_plus.img
Download page for twrp-3.6.2_9-0-z2_plus.img
dl.twrp.me
Then wiped dalvik,system,data and cache then within install zip menu first I selected latest crdroid rom zip downloaded from here
https://sourceforge.net/projects/crdroid/files/z2_plus/8.x/crDroidAndroid-12.1-20220613-z2_plus-v8.6.zip/download
then I've added latest opengapps zip as well in batch downloaded from here
open_gapps-arm64-12L-nano-20220705-UNOFFICIAL_MOD.zip
drive.google.com
then I swiped flash button and after completion clicked on reboot button and phone booted properly and working fine now and as compare to other android 12 rom this rom runs phone cooler
Just facing one issue which I also faced in last rom as well is that sometime when phone call is coming and phone rings then phone shutdowns very quickly during ringing but after starting phone works normally
Hi, This OS works really great having some minor issues but It's managable. It runs really smooth but not optimized for battery. If we can have a feature like background app manager, It would be great.
One issue is related to the vibration setting, where it won't work for vibrate and ring gradully, Or if I turned of vibration for ring. Then phone vibration setting works as silent. It's should vibrate I think, Please help if possible.
Thanks
Replaced the battery and the draining part vanished, but there are random reboots when the phone is in sleep mode, also the heating is still present and more so if wifi or mobile data is active. I guess this is because of the cpu governor which is more aggressive towards performance than battery saving. Despite some minor bugs which needs to be fixed the rom works very well. I flashed magisk for root but it caused random reboots and sluggishness even though i had not installed any module, so i uninstalled it completely and wiped system, data, dalvik art cache/cache, internal storage and format data as well and did a clean flash which worked of course without root, but still random reboots remain. Hope you can look into it. I am at the latest version crdroid v8.7 android 12. Also i would like to ask if the rom is EOL or updates are going to continue.
LineageOS 19.1 for Sony Xperia XZ Premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ Premium, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat). I can't test NFC very thoroughly, to please report your findings.
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
Real vendor partition
FBE instead of FDE encryption
DOWNLOAD
You can download the latest releases and TWRP here:
https://androidfilehost.com/?w=files&flid=333825
Check the ChangeLog below for firmware requirements!
INSTALLATION
This build uses a real vendor partition in place for the (now) useless oem partition. You will therefore need the modified TWRP with vendor/FBE support linked above.
Before first install: flash and boot into TWRP, format data, reboot to recovery and wipe all internal partitions.
After above step / any subsequent dirty flashes: Boot into recovery, put the ROM, GApps and root (if needed) on sdcard and flash.
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from previous builds, simply dirty flash the ROM, together with any GApps and/or other modifications - addon.d will not work due to currently unavailable TWRP decryption.
Recommended GApps: MindTheGapps-12.1.0
KNOWN ISSUES
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Thanks to the yoshino testers (let me know if I forgot to add you)
coin3x, feduss, GiaSen, Gizanagi, hsheemi, kaancaliskan, No1Alien, sohrab1985
Source Code
maple: https://github.com/whatawurst/android_device_sony_maple
maple_dsds: https://github.com/whatawurst/android_device_sony_maple_dsds
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 12.1 / 12L
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.3
Stable Release Date: 2022-04-20
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
How to get root?
As mentioned before, there will not be an official su addon from LOS anymore. If you need root, flash an unofficial solution.
REQUIRED FIRMWARE: 47.2.A.10.107 (47.2.A.11.239 should also work as there isn't any real changes)
CHANGELOG
2022-04-20 | 1.3| 47.2.A.10.107
Initial release
Thanks for your work. And can the kernel support f2fs filesystem？ Does the camera work if i use another gpu driver？
ssdsw said:
Thanks for your work. And can the kernel support f2fs filesystem？ Does the camera work if i use another gpu driver？
Click to expand...
Click to collapse
f2fs is enabled in the kernel ( https://github.com/whatawurst/andro...8998-yoshino-maple_dsds_defconfig#L4632-L4636 ), but that doesn't mean you can use it as is. You would have to adjust the fstab's. No that I would recommend it, seeing as f2fs hasn't really received a lot of updates/(security) fixes for 4.4 kernels in recent times.
And no, you cannot update the gpu drivers. The Sony stock camera blobs are quite dependent on a specific tag.
derf elot said:
f2fs is enabled in the kernel ( https://github.com/whatawurst/andro...8998-yoshino-maple_dsds_defconfig#L4632-L4636 ), but that doesn't mean you can use it as is. You would have to adjust the fstab's. No that I would recommend it, seeing as f2fs hasn't really received a lot of updates/(security) fixes for 4.4 kernels in recent times.
And no, you cannot update the gpu drivers. The Sony stock camera blobs are quite dependent on a specific tag.
Click to expand...
Click to collapse
is there any clues/guide on how to edit the fstab?
so we can use f2fs on data & cache
is signature spoofing (for microg) enabled?
and as i already have installed the ArrowOS build of avl.callista which is based on your work: flash Stock ROM and then install your twrp+rom? or is stock rom step not necessary and it's enough to flash twrp+rom?
m00ns0rr0w said:
is signature spoofing (for microg) enabled?
and as i already have installed the ArrowOS build of avl.callista which is based on your work: flash Stock ROM and then install your twrp+rom? or is stock rom step not necessary and it's enough to flash twrp+rom?
Click to expand...
Click to collapse
no, spoofing is not enabled. I have made builds for 19 before with spoofing enabled, so it works. but rebuilding with spoofing enabled takes a while every time, since it includes changes in fw/b and that's a hefty compile.
as for flashing over another rom: it may or may not work. upgrading from los 18 should work by flashing rom together with 12.1 microg, but no idea about migrating from one rom to another.
derf elot said:
no, spoofing is not enabled. I have made builds for 19 before with spoofing enabled, so it works. but rebuilding with spoofing enabled takes a while every time, since it includes changes in fw/b and that's a hefty compile.
as for flashing over another rom: it may or may not work. upgrading from los 18 should work by flashing rom together with 12.1 microg, but no idea about migrating from one rom to another.
Click to expand...
Click to collapse
hi,
thx for your answer. i was just curious, as the arrowos build is based on your work and has signature spoofing enabled. But if, as you write, that's a lot of work then ... no problem. the arrowos version is stable
And, without signature spoofing, the part with "howto best migrate from rom A to rom B" is obsolete Self-building doesn't seem to be an option, as the hardware requirements seem a bit ... ambitious
Thanks for the great ROM.
I did a few tests today and I couldn't find anything broken.
The only issue I have found so far is when I take a picture or video with Open Camera and try to open it for preview inside the app. It does not work.
Thanks for your working on the ROM.
I found that LOS installed on my G8142 seems to have screen always on when charging, both on 18.1 and 19.1 (which is this one). How to turn it off?
Very nice, THANK YOU for great rom, i am testing it rn, so far so good.
To save someone a troubles i encountered:
I am comming from rooted stock .107, please all do flash correct TWRP!!! , i was slopy but have experience in flashing so i just dirtyflashed it on old TWRP, phone hanged prior to accessing twrp, could not hardreset or annything haha and i had to pull my battery so please just in case FLASH CORRECT TWRP
I like it alot, am switching to daily
stipi69 said:
Very nice, THANK YOU for great rom, i am testing it rn, so far so good.
To save someone a troubles i encountered:
I am comming from rooted stock .107, please all do flash correct TWRP!!! , i was slopy but have experience in flashing so i just dirtyflashed it on old TWRP, phone hanged prior to accessing twrp, could not hardreset or annything haha and i had to pull my battery so please just in case FLASH CORRECT TWRP
I like it alot, am switching to daily
Click to expand...
Click to collapse
Great, yes it needs the twrp I uploaded because of vendor partition and change from fde to fbe.
But just for reference, pulling the battery should not be necessary if it gets stuck. it should be enough to press and hold vol up (or down, I forget because I haven't needed it in a while) + power. it'll vibrate once, but keep holding it until it vibrates twice in quick succession. that should power it off. you can then enter fastboot to flash twrp or flash mode to flash stock.
derf elot said:
Great, yes it needs the twrp I uploaded because of vendor partition and change from fde to fbe.
But just for reference, pulling the battery should not be necessary if it gets stuck. it should be enough to press and hold vol up (or down, I forget because I haven't needed it in a while) + power. it'll vibrate once, but keep holding it until it vibrates twice in quick succession. that should power it off. you can then enter fastboot to flash twrp or flash mode to flash stock.
Click to expand...
Click to collapse
I agree, but i have faulty vol+ key so i was having a hard part sadlly.
Can i ask you something i see this problem 1+ years on all Lineage roms and i am not a developer:
SETTINGS / DISPLAY / LIVE DISPLAY / COLOR PROFILE / VIVID
If i choose this profile i get like 8 bit colors after a while of use, but realy like this profile... i adjusted it manualy now its good looking and stable but wondering if it is XZ P specific or all lineage
short message: my SIM card isn't working with this ROM.
long message: today i installed this ROM. I first flashed stock ROM, booted into it once, and then flashed this ROM. But, as with the ArrowOS ROM, my SIM card isn't working.
More Details: after fresh install of this ROM and during boot i enter the SIM PIN (so that works), but after boot it says: "service not available" (Dienst nicht verfügbar). I'm unable to get it working.
Provider: congstar (telekom daughter). The SIM worked with stock ROM, and it works in an older Samsung S5. Just for curiosity i flashed stock ROM again and
Yeah, i know, no warranty, but... someone had such a problem before?
thx
geee... getting crazy here... after the next (test) flash of this ROM the SIM suddenly works, as well as phone calls, SMS, ...
what's the difference to the first flash? after latest stock ROM flash i left the SIM inside, and the stock ROM (or the telekom software) did some settings, rebooted, and then i started the last flash. Is there something magic that is happening here?
if i had more hair all of it would be bright gray...
OK, after almost a week... no SIM card problems anymore. ROM is running stable.
Just some apps that somehow rely on Google Play Services (or microg maybe) don't run: apps that warn regarding severe weather conditions or catastrophes, like 'DWD Warnwetter', 'NINA KatWarn' etc.. Push notifications...
ROM is stable, and i finally managed the signature spoofing + microg stuff. Thx to @Yokurt815 and his little list in the XZ1C thread - going step by step, writing it all down, finally succeeded.
Am i right that the magisk/lygisk stuff has to be done again after flashing an possibly upcoming ROM update?
Big thanks to @derf elot for this rom
A couple of things though . . .
Anyone got this setting to turn on?
All languages set to English AU
Mind the gapps 12.1 installed
Google set to default assistant
Also, trying to search in settings causes a crash.
shoey63 said:
Big thanks to @derf elot for this rom
A couple of things though . . .
Anyone got this setting to turn on?
All languages set to English AU
Mind the gapps 12.1 installed
Google set to default assistant
Also, trying to search in settings causes a crash.
View attachment 5643169
Click to expand...
Click to collapse
Edited: NVM, seems like it won't work neither.
You need to set Ok Google/Hey Google at first boot; otherwise, it won't work.
LineageOS 20.0 for Sony Xperia XZ Premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ Premium, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat). I can't test NFC very thoroughly, to please report your findings.
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
DOWNLOAD
You can download the latest releases and TWRP here:
ROM:
https://sourceforge.net/projects/yoshino/files/maple/lineage-20.0/
TWRP:
https://sourceforge.net/projects/yoshino/files/maple/twrp/
Suggested Gapps (MindTheGapps) - choose 13.0.0/arm64:
https://androidfilehost.com/?w=files&flid=322935
or
http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Check the ChangeLog below for firmware requirements!
INSTALLATION
Before first install: flash and boot into the TWRP provided in this thread, format data, reboot to recovery and wipe all internal partitions, then flash the ROM, GApps and root (if needed).
Or if you are coming from Lineage 19.x, dirty flash to 20.0 is possible too: flash the new TWRP, ROM, and GApps, su addons (if needed).
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from previous builds, simply dirty flash the ROM is enough, decryption in new TWRP works now
Recommended GApps: MindTheGapps provided in this thread. (Important to flash with rom)
KNOWN ISSUES
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Thanks to the yoshino testers (let me know if I forgot to add you)
coin3x, feduss, GiaSen, Gizanagi, hsheemi, kaancaliskan, sohrab1985
Source Code
maple: https://github.com/whatawurst/android_device_sony_maple
maple_dsds: https://github.com/whatawurst/android_device_sony_maple_dsds
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2023-05-10
All credits goes to derf elot and all the other developers involved, I only post it.
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
How to get root?
As mentioned before, there will not be an official su addon from LOS anymore. If you need root, flash an unofficial solution.
REQUIRED FIRMWARE:
CHANGELOG
2023-05-10 | 1.2 | 47.2.A.10.107
Updated to T QPR2 release (LineageOS upstream)
Updated to May 2023 Security updates (both ROM and kernel)
Our kernel now includes updates by CIP and is up-to-date with tag st40 - thanks also to Flamefire for help with some of these (1)
Reduced zram size to 25% (1gb) of out total RAM to have more to use freely
Updated BT stuff for QPR2 (maybe offloading is working again? needs confirmation)
Added the option to reflash the mbn via OpenCS (see Xperia Parts) - thanks also to shank03 & Flamefire (2)
Fully enabled IMS on Congstar Germany via overlay on lilac
Possibly some battery/performance optimizations here and there
Fixed Android Auto support
Added new LineageOS "Charging control hal" for battery charging care (3)
Maybe more I forgot...
(1) The CIP kernel includes fixes for issues and security vulnerabilities from 4.14 kernel (see https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git)
(2) A somehwat lengthy explanation: This option is off by default on fresh installs. When upgrading, this should be enabled because we enforced this for everybody previously. However, this option is only required for certain carrier mbns that enable IMS. Personally, I know that the O2/Telefonica Germany mbn needs this, otherwise you get a crashing modem at every boot (unless you switch to 3g before rebooting and back to LTE after boot). I generally recommend playing with this option, and if you don't need it (e.g. modem doesn't crash on boot), just keep it off - like mentioned before, this is now the default behavior of OpenCS on fresh installs anyway.
(3) This is not finalized or merged upstream in LineageOS yet, but seems like a nice feature to have and test drive already. Some bugs may be possible.
2023-01-08 | 1.1 | 47.2.A.10.107
Updated to T QPR1 release (LineageOS upstream)
New default camera app (LineageOS upstream) - yes, we cannot change video fps currently (thanks Sony!)
Any other updates by LineageOS upstream
Kernel security updates (also thanks to Flamefire)
Dropped keyprovd service - it is useless on unlocked BL anyway
Show 4G instead of LTE icon - saves some space too
Enable IMS by default - this still only works if carrier is supported
Fix some selinux denials (also thanks to Flamefire)
Fixup ViLTE dependencies - this might in theory work again, but it's not enabled yet
2022-10-03 | 1.0 | 47.2.A.10.107
Initial release
Is it the same procedure as always?
first flash latest available Stock ROM(47.2.A.10.107) and boot into it once.
Then flash the twrp,
then flash the rom?
Gordon1979 said:
Is it the same procedure as always?
first flash latest available Stock ROM(47.2.A.10.107) and boot into it once.
Then flash the twrp,
then flash the rom?
Click to expand...
Click to collapse
Yes, That's it.
Flash gapps as well and maybe magisk if you want root.
Try it yesterday, it work fine.
But dirty flash from los19.1 lead boot loop
Nothing bug so far.
But light theme with white text bug seem fix from los 19.1.
THANK YOU for your Great Work
patrriot said:
THANK YOU for your Great Work . IT is perfect.
Click to expand...
Click to collapse
Hi all, and sorry, i forgot translate to english.
dirty flash, bootloop to recovery
clean flash, bootloop to recovery
delete all internal partitions, /firmware, /dsp, etc...
Now my phone a black screen wit the blue led blinking when press power button, o connect to charger, but my computer do no recognice the phone, combo keys do not work.
Only i am the reponse of the hard brick.
Sorry to all.
juanantofb said:
Hola a todos.
flash sucio, ........
Click to expand...
Click to collapse
It seems you don't know the first thing about xda
Can you put the network speed indicator ① in position ②?
juanantofb said:
Hi all, and sorry, i forgot translate to english.
dirty flash, bootloop to recovery
clean flash, bootloop to recovery
delete all internal partitions, /firmware, /dsp, etc...
Now my phone a black screen wit the blue led blinking when press power button, o connect to charger, but my computer do no recognice the phone, combo keys do not work.
Only i am the reponse of the hard brick.
Sorry to all.
Click to expand...
Click to collapse
You should not wipe those partitions. They are not wipeable in the GUI for a reason.
You should be bale to recovery this by going into flash mode and re-flashing stock.
juanantofb said:
Hi all, and sorry, i forgot translate to english.
dirty flash, bootloop to recovery
clean flash, bootloop to recovery
delete all internal partitions, /firmware, /dsp, etc...
Now my phone a black screen wit the blue led blinking when press power button, o connect to charger, but my computer do no recognice the phone, combo keys do not work.
Only i am the reponse of the hard brick.
Sorry to all.
Click to expand...
Click to collapse
Do a TWRP install again in Fastboot mode. Hold down the VOL + key and then connect the data cable to the PC. Led Blue ON .
Install the Universal ADB drivers.
Bbb
Hi all, not posible to enter in fastmode or flashmode, i waiting to discharge battery, if i can not enter in fastmode i think that this Sony is in the finale of your life.
juanantofb said:
Hi all, and sorry, i forgot translate to english.
dirty flash, bootloop to recovery
clean flash, bootloop to recovery
delete all internal partitions, /firmware, /dsp, etc...
Now my phone a black screen wit the blue led blinking when press power button, o connect to charger, but my computer do no recognice the phone, combo keys do not work.
Only i am the reponse of the hard brick.
Sorry to all.
Click to expand...
Click to collapse
I'm sorry that this happened to your device.
As other friends mentioned in other posts you can recover from this by flashing the stock firmware IF you can get it to flash mode.
Hi, do not worry, the battery in this phone is the end of your life, more rom has been flashed.
The problem is that i can not put phone in flash mode, only the last posibility is to wait tha the phone discharge battery and i can enter in flash mode.
Thank.
sohrab1985 said:
I'm sorry that this happened to your device.
As other friends mentioned in other posts you can recover from this by flashing the stock firmware IF you can get it to flash mode.
Click to expand...
Click to collapse
Found a small bug but not effect daily use.
When choose font or icon shapes.
It always default to last option.
The change effect normally through.
Installation complete, with minor difficulties.
My instructions:
1. flash last firmware (47.2.A.10.107) --> green LED
2. reboot once completely, Play Store not required to set up
3. reboot to fastboot --> blue LED
Link driver: https://developer.android.com/studio/run/win-usb
4. flash twrp: fastboot flash recovery twrp-3.6.2_12-0-20221002-maple
5. reboot to twrp
6. format data + restart in recovery
7. format dalvic , system , cache , data , internal storage + restart in recovery [ NOT Vendor Format !!!!! ]
8. flash the ROM,
8.1 Flash theGApps
8.2 Format Dalvic, Cache
9. reboooooooot
Have Fun
Hello,
This is the first rom I installed on my phone ever. I took me all day to figure it out how to unlock bootloader, install TWRP and then ROMS. I tried three roms: crDroid, Nusantara, and this one. I like this one best. It is amazing that one person can make such an OS and a whole sony corporation can not make an update
P.S. It works very well, but on my phone icons do not have bubbles when for example a message arrives. Maybe that is a bug or simply I do not know how to enable them (Notification dot on app icon is enabled).
At first I thought that there is a bug then I could not access files on a phone from a computer, but later I find out that it is a new security feature of newer android OS (I changed it to file transfer always on in Developers options)
Thank you