Related
is there such thing aside from the spigen curved one? i heard the spigen ones are garbage. i've used skinomi (they were all right, not as durable), they covered 95% of the screen. the zagg invisible shields were garbage, wasted 25$ and thought it covers the whole screen but it left a huge gap.
Try Tippin Screen protector.
tippin is where its at for full curved protectors.. just remember any case that wraps around the edge tightly is probably not compatible
Does this tippin cover as good if not better than SGP Curved Crystal? The reason I ask is the images on Amazon show that it does not cover the portion immediately above the ear speaker. I love the curved crystal except for the dents that won't disappear. Does the tippin have this problem? Thanks!
the tippin pretty much covers all. ear speaker, sensors+camera, and home button are cut out. if you press on it hard enough with your nail, itll leave a dent. will it go away eventually? dont know, probably not. i think the tippin scratches kind of easily. i noticed a small rainbow line. not sure if its a scratched screen protector or cracked glass. another thing about these screen protectors...you have a small margin for error for placement. i was ocd at first and wanted it on 100% perfect alignment. i tried the tape the side method. thought i had it on perfect, but nope. a small sliver didnt stick because it was on slightly to the left. took the whole thing off and could not put it on as good as before. i spent almost an hr, gave up and ended up with even worse alignment. so my advice is get it aligned the way you want it on the 1st try. since these were a ***** to apply, id like a screen protector thats between full and gapped coverage. but the clarity is good and i think it gets slightly less fingerprints than the naked screen.
aznblade said:
is there such thing aside from the spigen curved one? i heard the spigen ones are garbage. i've used skinomi (they were all right, not as durable), they covered 95% of the screen. the zagg invisible shields were garbage, wasted 25$ and thought it covers the whole screen but it left a huge gap.
Click to expand...
Click to collapse
The Spigen is good. I would say they are far superior to the Skinomi ones.
I went this route. This is now in my top spot for screen protectors.
http://chrismchoi.blogspot.com/2013/03/seidio-vitreo.html
This is what I use. It covers the entire screen and is smooth. It also seems to repel fingerprints and is somewhat scratch resistent. Most people looking at my phone can't even tell there is a screen protector on it.
http://www.amazon.com/REALOOK-Prote...=1362606630&sr=8-1&keywords=galaxy+s3+realook
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
j76ms said:
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
Click to expand...
Click to collapse
I don't notice any dents, but I use swype as my keyboard of choice. Do you push hard when texting? I let my 4 and 6 year old use my phone often, and I still don't notice much wear. There are a couple of tiny scrathes on my screen protector, and they are only noticeable in direct light at certain angles. I have had the protector on for about 3 months. My old protector (Zagg HD) showed fingernail dents and nicks about a week after I put it on.
j76ms said:
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
Click to expand...
Click to collapse
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Jottle said:
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Click to expand...
Click to collapse
Thanks Jottle. I was thinking it is probably the same material as the curved crystal. I have found 3 cases that the full coverage works with: UAG, Eclipse Element and SGP Modello. I love the look of the full coverage with these cases but with the dents, I have to replace the protector about once every 2 months.
Jottle said:
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Click to expand...
Click to collapse
I am currently using the Seidio Surface case with my Realook screen protector. It works without any problems. I have also used the Rock Quicksand case and the Incipio Sylicriic without any issues.
Moozh1 said:
I am currently using the Seidio Surface case with my Realook screen protector. It works without any problems. I have also used the Rock Quicksand case and the Incipio Sylicriic without any issues.
Click to expand...
Click to collapse
Just wanted to add that I've now tried the Tippin full coverage screen protectors as well. They are incompatible with my case as well. There are some tpu cases that will work with full coverage protectors. But the extremely tight ones that barely cover the corners will not.
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since phones today have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
I also second this. Anyone that has this screen protector please respond.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I just found out that Spigen is selling a new type of tempered Glass screen protector it is "GLAS.T" it's different from the old one. This new one is all transparent and has adhesive all through-out the back part of the screen protector, unlike the old one which has paint on the borders and only adhesive on the painted area.
Spigen has GLAS.T for Note 1 Anyone that used the product for about 5-6 months now?
ichilouch said:
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since phones today have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
Click to expand...
Click to collapse
I have a tempered glass screen protector for my Note 3 and it fits and works perfectly. It's been on my phone for 2 months now. Not a single scratch to it and no peeling or dust accumulation at all. I would recommend one any time over a plastic protector. I got mine from a company called fasttech. They are very cheap compared to UK sellers and the company is very reliable even considering that they are Chinese.
Tempered glass has an adhesive throughout the whole surface, not only the bezel/perimeter area.
The difference is very simple. If you want scratch protection, get a film screen protector, but make sure to get quality PET 3H hardness film like the one sold by iSmooth and Spigen. Cheap ebay stuff is thin, will scratch, will bubble after some time, and will have rainbow effect under the florescent light. If you want ultimate shatter protection - get tempered glass. On impact the glass will shatter without affecting your display. Spigen and Seidio makes some of the best ones. I'm personally a big fan of Seidio VITREO and been using it on my Note 2 for a very long time.
for LG g2 temperate glass or we don't have to buy anything
I use the tempered glass for the LG G2, i think its better than a film protector.
No bubbles nothing, very clean. if you dont look at the edges u wont see there is a protector.
4ex said:
I use the tempered glass for the LG G2, i think its better than a film protector.
No bubbles nothing, very clean. if you dont look at the edges u wont see there is a protector.
Click to expand...
Click to collapse
i've really no bubbles, just use the type method to remove bubles cause by dust.
the cons is that film protector changes a bit the polarization of my glass so it has more strange effect on very high view angle
cocconut said:
i've really no bubbles, just use the type method to remove bubles cause by dust.
the cons is that film protector changes a bit the polarization of my glass so it has more strange effect on very high view angle
Click to expand...
Click to collapse
Did u try a tempered glass or went straight to the film protector?
I tried 2 film protectors but i wasn't satisfied with that but the tempered glass is really fine for me.
Pros & cons of Tempered glass screen protector
4ex said:
Did u try a tempered glass or went straight to the film protector?
I tried 2 film protectors but i wasn't satisfied with that but the tempered glass is really fine for me.
Click to expand...
Click to collapse
The advantages of T. glass over films are the following.
-. Scratch - (almost)free : sellers boast it is harder than stock display, but I don't agree with. Glass screen protector also gets scratch.
-. Superb feeling : yes. its feeling is real better even stock display including any premium film. http://vimeo.com/91463403
-. Bubble -Free : Yes. it is easy to install and you don't worry about bubble.
Disadvantages
-. Price : $5~40 : I have tried $5 and 40 as well. I don't recommend both $5 and $40. you can find good one between them.
-. Thickness :0.15~0.4mm : Compared to film, it is bulky. Sometimes it won't be compatible with certain cases. (I don't recommend too thin one, since it is easy to brake before doing its protection job)
i have used a glass screen protector for the last month until it broke when i dropped my phone from hip height. i am extremely satisfied by the product. as it is rigid, it is very easy to apply and in contrast with plastic film protectors, the tempered glass lets your fingers glide on the screen. i was also impressed by the fact that after 1 month's use my phone had zero scratches, even though i was kind of provoking scratches by the way i was handling the phone. never going back to plastic film, not a slight chance there.
I've run a gauntlet recently with screen protectors and cases with my galaxy s7 edge. I can definitely tell you the pros and cons between tempered glass and soft film screen protectors.
Tempered glass pros- much sturdier, better scratch resistance, looks better. Easier to install. Longer field life. Better phone protection all around.
Tempered glass cons: some cases won't work with tempered glass unless it has a top that fully covers the glass. Dust buildup under screen protector, less sensitivity- much less. Won't work with an otterbox symmetry because the sides and front push the glass up and out but does work with the defender because the defender covers the edge of the screen. If sand or dirt gets underneath glsss, it could scratch up your screen. Very thick too.
PET film pros- better sensitivity, will work with any phone case. Sturdy enough for the most part. No issues with dust buildup under the cover. Works with any case and has better adherence. Very thin.
PET cons- they look cheap and scratch more easily than tempered glass and you can tell that the phone has a screen protector. Harder to install. The protector scratches but the phone screen doesn't. Shorter field life.
Personally, I prefer PET film screen protectors to tempered glass but to be fair, I have an edge phone and glass screen protectors with edge phones can be more finicky than flat phones. Glass looks better, but aside from drop protection and looks, they don't keep the dirt out and can be a chore with the wrong kind of cases, or simply won't work.
I think film is much more versatile and I'm willing to trade some aesthetics in favor of usability. That's my 2 cents on both types of screen protectors based on recent experience.
---------- Post added at 06:46 AM ---------- Previous post was at 06:36 AM ----------
And liquid bubbles with soft cases go away in a few days. Air must be popped and dust must be removed physically but moisture does dry out. You can tell a moisture bubble because it has rainbow swirls if you view the phone on a screen with a white background.
Don't try to iron out small moisture bubbles or press them out. They go away on their own within a week and if you mess with them you can bend your soft screen protector out of shape or get divot lines.
Also, if the soft screen protector has the oleophobic coating, it does work very well, in fact it's almost if not better about prints and crap on the screen than actual glass screens. Plus, tempered glass can be a problem on certain phones.
My friend has a note 5 with a tempered glass screen protector and he dropped his phone (no case) so instead of the screen shattering, the back of the phone did. Protectors work, but if you have a glass coated phone- better have a case on it.
Since there is only a thread for the Nillkin cases and tempered glass I thought it would be nice to have some thread for the accessories in general.
Until this day I tried 3 cases, two screen protectors (films) and two tempered glass protectors.
Case No. 1 ) Slim, silicone case http://www.ebay.com/itm/Transparent-Clear-Silicone-Slim-Gel-Case-For-Huawei-Honor-9/112446352466?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 - Very slim and light case made from nice silicone BUT the protection when dropped would be none. It's not made 100% precisely and since it's silicone it doesn't look any good on the back where it creates bubbles. I've ordered this as the first case to have at least some protection. Nice thing is they include free screen protector but the quality isn't very good - doesn't cover the whole display (I'm not talking about edge-to-edge) and there are 2mm gaps on each side and when the display is on it looks terrible. 2/5
Case No. 2) Nillkin Super Frosted http://www.ebay.com/itm/For-HUAWEI-Honor-9-NILLKIN-Super-Frosted-Shield-Hard-Plastic-Back-Covers-Cases-/152596952252?var=&hash=item23877cb4bc:m:mtNLCAV-KRHaAK2TUOYLPTg - very nice case, really sturdy BUT I have few complaints - it's kinda slippery on the sides but this will go away after some use maybe and the bottom side around jack, charging port and speaker is a bit sharp and if you're holding the phone with the little finger on the bottom it't not really comfortable. Besides that it's really nice case for the price but I expected a bit more. But once again for the price it's more than OK. 4/5
Case No. 3) TPU Shockproof case with "carbon" http://www.ebay.com/itm/Luxury-Carbon-Fiber-Slim-Shockproof-Soft-TPU-Back-Case-For-Huawei-Honor-9-Magic/112325496837?ssPageName=STRK%3AMEBIDX%3AIT&var=412748326145&_trksid=p2060353.m2749.l2649 - as you can imagine, there is absolutely no carbon at all, just some kind of "sticker" or what it is. Nevermind, this case is the best of the three. Really nice case made from TPU, sturdy, should have the best drop protection and fits just perfectly. There is a small "rim" around the screen that should protect the screen from scratches when the phone is "face down". 5/5
Screen protector (film) No. 1) Nillkin Super Clear Protective Film - in terms of size the best screen protector I've had. Obviously it's not edge-to-edge but it does cover the whole display with gaps on the edges BUT the display is fully protected so thumbs up for me. In terms of "anti-fingerprint" it's nowhere close to the display or the back but is much better than some noname protector I've got with TPU case. Overall very nice screen protector for free but I'm still waiting for the Nillkin H+ tempered glass and some noname edge-to-edge tempered glass. 4/5
Tempered glass No. 1) Edge-to-edge blue 2.5D tempered glass http://www.ebay.com/itm/9H-2-5D-Full-Cover-Real-Tempered-Glass-Screen-Protective-Film-For-Huawei-honor-9/152593109357?ssPageName=STRK%3AMEBIDX%3AIT&var=452016649496&_trksid=p2060353.m2749.l2649 - really nice tempered glass (2 pcs) for the price. It has the adhesive only on the top, bottom and the sides but the application was very easy and the glass holds on even with any of tested cases. It has some "dots" in the screen area so I got no rainbow effect whatsoever. The blue color is a bit different from the original color od the phone but it's not a problem since you have your phone in a case. Overall for the price pretty good. 4/5
Tempered glass No. 2) Normal tempered glass Caliber (bought in CZE) - not edge-to-edge, doesn't cover the whole screen, gaps on the sides. Overall sh*t. 1/5
Still waiting for the Nillkin H+ tempered glass.
Nilkin Amazing H+ Pro is No Go
Got the 0.2mm H+ Pro. It's cover the display area for like 99%, with-out just about 0.5mm on each side, after all still the best.
BUT. The silicon layer doesn't hold the tempered glass on both sides, looks like the phone display curve started a bit earlier than its needed for the protector.
It doesn't stick to the display, making it looks like ****, with 3mm frame from each side. Top/bottom sides stick OK, all the way to edges.
So Nilkin Amazing H+ Pro is No Go for me.
Well, got it yesterday so I'm still waiting to try it but not sure if wan't to :laugh:
cases
sooooo, I bought these from tvc mall. They were so cheap that I bought three different ones with the intent of disposing of whichever were poor. Thing is, they are all good in their own way. The plain bumper is just very slimline. The rugged looking one is cool as it has a stand in landscape mode, and the wallet is exceptional quality, given the price. All three fit perfectly, but the plain bumper makes the power and volume buttons so much more tactile. The rugged one looks really cheap in silver, perhaps black would have been a good choice. As i wasn't expecting much from the wallet one, I also oredered the nilkin wallet but that hasn't arrived yet.
https://www.tvc-mall.com/details/dr...r-9-auspicious-dragon-black-sku10174840d.html
https://www.tvc-mall.com/details/fo...casing-with-kickstand-black-sku10174919a.html
https://www.tvc-mall.com/details/ma...ot-for-huawei-honor-9-black-sku10175044a.html
https://www.tvc-mall.com/details/ni...se-for-huawei-honor-9-black-sku10174916a.html
I have also ordered the ultimate sheild screen protector, which is edge to edge, in black as I think it will make an excellent contrast to the silver rear of the handset....which wont be visible when the (absolutely necessary) bumper is fitted!
Ultimate sheild screen protector
.... And the ultimate sheild protector turned up. It is excellent. A word of caution, unless this is fitted absolutely perfectly, it will render one or both of the capacitance keys inoperable. This happened to me as i fitted the sheild a fraction of a millimetre to the right. I carefully removed and replaced it with more accuracy.
Here is a pic of the black sheild fitted to my silver H9, and a photo of the plain bumper fitted from my previous post. Svelt but rugged!
After a couple of hours of use I can say that there has been no loss of sensitivity on the screen or capacitive buttons, but on darker details and the blacks, it does look like the screen is behind a sheet of glass. You will know what i mean if you have used a screen protector which bonds over its entirety, whereas this one has a mild adhesive at the top and bottom of the protector, where the bezels are. A small price to pay i think to protect my new device. It is mostly noticeable in bright light, not so much in low light. And I love the new black look of the bezels with the silver fingerprint sensor still visible.
Right, so, some more hours on....the ultimate sheild has begun to show its flaws. Towards the middle of the screen there is now what i can only describe as a "woodgrain" effect. This could be caused by tiny amounts of moisture getting between the screen and protector, which I guess there is nothing to stop that happening. They offered a refund for dissatisfaction so I guess I will be chasing that up. Pfffft. So disappointed.....
Is there a smart cover for it ?!
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
NotoriousNick said:
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
Click to expand...
Click to collapse
Can you upload a photo of the phone with the case applied?! That would be awesome
The nilkin "sparkle series" wallet turned up. Its awful. Unlike the cheap wallet I purchased, which remains closed under magnetism, the nilkin just falls open and feels poorer quality.
The Ipaky bumper with the clear perspex back is, however, very nice. The only caveat, it sits flush with the screen so offers no protection if you decide to place your device screen down.
I'm waiting for the smart cover case, if it didn't come fast, I'll go with a skin.
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
danygold95 said:
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
Click to expand...
Click to collapse
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
PalakMi said:
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
Click to expand...
Click to collapse
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
danygold95 said:
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
Click to expand...
Click to collapse
I didn't test, I will try it once I get my honor 9
PalakMi said:
I didn't test, I will try it once I get my honor 9
Click to expand...
Click to collapse
:good:
If someone else has tried this protective film, please give us a feedback.
Did someone try the Mofi screen protector? According to a review on Aliexpress it has minimal space at both sides.
I've seen ones from ultimate shield, I'm considering getting one.
PalakMi said:
I've seen ones from ultimate shield, I'm considering getting one.
Click to expand...
Click to collapse
Good luck with that. Did you read my earlier post? As the protector does not actually sit on the screen, due to the adhesive around the edges, it is susceptible to the "rainbow effect" which i think is caused by humidity between screen and protector. It seemed to manifest itself after the phone had been in my pocket and warmed up. I don't have an overly sweaty crotch.....
Anyhow, they apologised and promptly sent a replacement and the same happened again.
By all means give it a go and they will refund you without issue.
When I first got my S8+, I was worried the back glass would scratch easy (turns out I was right ), so I wanted to protect it, even though I knew I would have a case on it. I've seen dirt get between phones and cases before and cause horrible scratches.
I first tried a clear wet application skin from BSE, but I could never make it look right. The midnight black shoes every imperfection and bubble, whereas my wife's Orchid Grey looks perfect with the skin on. You can't tell it's there, even on the sides.
So I began thinking it would be nice if someone made a tempered glass protector for the back. The sides are curved, but so is the screen, and there's plenty of TGSPs on the market. But I couldn't find any.
Then last week I saw one on Amazon. It comes with a full screen TGSP, a TGP for the back, and a TGP for the camera. Link is below.
It appears the back protector is like other TGSPs. It has no glue on the middle, just along the edges. That's not a big deal, as I would apply it like I did my TGSP. I would remove the adhesive strip on the edge and use LOCA to adhere it fully to the phone. Most camera lens TGPs get horrible reviews on Amazon, so it would likely go in the trash.
I'm trying to decide what to do. Here are my pros and cons, but I wanted everyone else's opinion, and also want to know if anyone else has any experience with this set. Again, I'm currently using a TGSP for the screen, so this is a question about the TGP for the BACK.
Pros:
*Protection for the back cover as well as the front.
*Protects from scratches and adds some drop protection
*Protectors are both glass, so it would still feel like a naked device.
*Back protector is Crystal clear, and with LOCA, would show off the beautiful black back glass without any bubbles, glare, etc.
*Glass doesn't get marks and dents like wet application protectors.
Cons:
*It would (probably) be too thick to use a case, so increased chance of damage if dropped.
*These TGSPs typically use cheap oleophobic coatings, so it would still be a fingerprint magnet on the back.
*This would leave a ridge around the screen and the back protector, so it MAY make it uncomfortable to hold.
*No protection for the side frame
*It will scratch (but can always be replaced)
*I wish the cutouts were more precise. I'd like three separate cutouts for camera and sensors, not one big one. Would make it more seemless.
Again, looking for other thoughts and opinions and any experience.
No offense, but if all you have to say is that you go naked and have no scratches, or that you don't like screen protectors, then please don't reply. I'm not interested in a screen protector debate. I'm only interested in your opinions about this particular set and using a protector on the back. Also, I know about the liquid nano stuff and have no interest in it. I've seen all the reviews.
Thanks!
JimBird Tempered Glass Screen Protector Front + Back + Camera Lens Protector For Galaxy S8 Plus S8+ 9H Anti-Scratch Anti-Fingerprint https://www.amazon.com/dp/B073S4YZW1/ref=cm_sw_r_cp_apa_MohHzbHWHA99A
I have the Pixel 2 XL.
I've gone through several TG screen protectors so far. The first blocked the proximity sensor, another wasn't cut right, finally tried the one offered on the Google store but discovered that the case that I was using (Spigen Neo Hybrid) fits so closely that it pushes the edges of the screen protector up, letting dust under it and causing it to fail to register button presses on the corners of the screen!
What combination of case and screen protector have you all found that works for you?
My case is Spigen, and fits pretty tight, it's the only one of three I tried that has a tall enough lip that the screen doesn't touch the surface when laying face down. It is the right amount of protection without obscuring any sensors. mics, or cameras, and it's not slippery but doesn't pull your pocket inside out when you grab it.
The screen protector is Skinomi, and I've had 4 on my 6P and currently on first one on my 2 XL. No touch reduction issues. The surface is not quite as smooth and silky as glass (but many of the glass ones have edge adhesion issues, so I'm waiting), but this offers great drop protection. It is self healing, so if you get a good ding in the protector, it will slowly back itself out and the ding in the protector will be gone in a few days. Until I can find a glass one without the edge issues, this is a good alternative.
I've dropped the 2 XL maybe 3 or 4 times on gravel and concrete and the case and screen protector did their jobs very well with not a single mark on the phone or display.
Amazon descriptions below.
CASE:
Spigen Rugged Armor Google Pixel 2 XL Case with Resilient Shock Absorption and Carbon Fiber Design for Google Pixel 2 XL (2017) - Black
SCREEN PROTECTOR:
Google Pixel 2 XL Screen Protector (Maximum Coverage)[2-Pack], Skinomi TechSkin Full Coverage Screen Protector for Google Pixel 2 XL Clear HD Anti-Bubble Film
I'm currently using a Spigen case with carbon fibre accents on the top and bottom. It has mostly a matte finish which causes for it to be pretty slippery. Got a new case because of the slippery-ness, and it just came in the mail today.
The new one is just one of the usual transparent rubbery feeling cases, but it has a lot more grip! I noticed it gets a lot of fingerprints but I haven't used it long enough to know if its going to become an issue for me.
As for screen protector, I use a wet apply one that sounds similar to Az Biker's. It's self healing and it sits properly on the edges and actually covers the entire screen!
Couple of downsides though, for one, it doesn't feel like glass (since it's not glass lol) and two, you can see some grain when looking at anything that has a bright/white background.
For me it's still worth it just because in most conditions it's fine and I don't ever worry about it coming up from the edges like most glass protectors do on curved screens.