Previously I was using Ressurection Remix treble rom which is based on android 9 pie. I went to TWRP and wiped the OS. Then I tried to install a new rom called Dot OS. But it showed error 7. So I flashed Vendortofactory zip within twrp and without rebooting again into TWRP I flashed a new TWRP image within TWRP by selecting Recovery mode. After that I cant boot into TWRP and as already my OS is gone I also cannot boot into any system. Moreover my device is not getting detected in my PC. I cannot install TWRP by writing commands in cmd, while the phone is in fastboot mode as the device is not getting detected in my pc. Really it is urgent. I will be glad if someone helps me. Thanks in advance.
What is the present booted state of your device? Are you in twrp, or bootloader. Most of the time you can keep on pressing the power button. When it boots into a message about unlocked bootloader, press volume button to select recovery and it will boot into twrp
You should be able to boot in fastboot mode without recovery nor os, maybe your drivers are not working on windows? Try different usb ports, check if the display says "bootloader" or something. If nothing works try the usb shunt, this device is literally 'unbrickable' if it's working properly.
Watch this video(https://www.youtube.com/watch?v=DexLELi04XY) and then you will be able to detect your phone in your pc in qcom 9008 mode , then use qfil to flash ZUI firmware ,there are plenty of tutorials on the internet for that ,then follow the proper procedure mentioned in DotOs thread for flashing the new rom .
Hope it helped .
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
yashpatel1221 said:
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
Click to expand...
Click to collapse
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
sanjay.2704 said:
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
Click to expand...
Click to collapse
I don't understand what you are talking about as i say i am not some kind of technical expert i am here help regarding this i faced similar situation where i am not able to enter into recovery and also not able to enter into the os and when i restart the phone it automatically boot into fast boot mode what ever option i select and i solved my problem by this method
Related
Hello,
I insatlled CWM recovery mode and flashed the phone with cynogenmod 11 with 4.4.4. It was working very good. Then I thought of re-flashing the device to Stock MIUI ROM. As it was giving error in sdcard mount, I installed the ROM with sideload. After completion, it stuck at the splash screen. I still can boot in Recovery mode, but not CWM recovery mode, it MI Recovery Mode. How can I make this phoe working again. What can I do ? Which software can be used to do a recovery from system. Any links softwares are present?
Help me please.... I am stuck here....
Well for beginning, you have to first think of you made a backup or not, if yes then no issues, if not then you need to flash the rom again.
Ok so, boot into fastboot by holding the vol- and power button, make sure your pc has fastboot drivers installed (google for fastboot drivers) then download the twrp recovery image and put the files in the same directory as fastboot driver.
After you have completed this pm back i will tell you next steps.
saheb11123 said:
Well for beginning, you have to first think of you made a backup or not, if yes then no issues, if not then you need to flash the rom again.
Ok so, boot into fastboot by holding the vol- and power button, make sure your pc has fastboot drivers installed (google for fastboot drivers) then download the twrp recovery image and put the files in the same directory as fastboot driver.
After you have completed this pm back i will tell you next steps.
Click to expand...
Click to collapse
--------------------
I just cleared the cache and data partition and restarted the phone. It started working. How can I know more about the different partitions and its usability as per Android OS. What keyword I use to search on Google or if you can provide any link...
Thanks for help.
Very simple, you can search google : "How to use MI Flash." It is a tool which is used for flash rom via fastboot with all Xiaomi Device.
There are 2 ways for installing stock rom : via recovery or via fastboot. You need down stock rom (for fastboot), then extract and using Mi Flash browse to folder u extracted
^^that was not what he asked.
Google for android system partitions info or info specific to redmi1s ...
Tried fixing my oppo find 7
Did all those Fastboot wipe .
Fastboot flash recovery and flash LOGO and stuffs
but im still stuck on logo ... WHUT
kevzwenhao said:
Tried fixing my oppo find 7
Did all those Fastboot wipe .
Fastboot flash recovery and flash LOGO and stuffs
but im still stuck on logo ... WHUT
Click to expand...
Click to collapse
Did you unlock bootloader?
1. Connect the device to the computer through USB.
2. From a terminal on a computer, type the following to boot the device into fastboot mode (or restart pressing power+vol up):
Code:
adb reboot bootloader
3. Once the device is in fastboot mode, verify your PC sees the device by typing:
Code:
fastboot devices
4. From the same terminal, type the following command to unlock the bootloader:
Code:
fastboot oem unlock
If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
5. Then you can flash the recovery what you want. In fastboot mode, type in terminal:
Code:
fastboot devices
6. And flash the recovery. Type:
Code:
fastboot flash recovery your_recovery_image.img
Good luck
roi_xordo said:
Did you unlock bootloader?
1. Connect the device to the computer through USB.
2. From a terminal on a computer, type the following to boot the device into fastboot mode (or restart pressing power+vol up):
Code:
adb reboot bootloader
3. Once the device is in fastboot mode, verify your PC sees the device by typing:
Code:
fastboot devices
4. From the same terminal, type the following command to unlock the bootloader:
Code:
fastboot oem unlock
If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
5. Then you can flash the recovery what you want. In fastboot mode, type in terminal:
Code:
fastboot devices
6. And flash the recovery. Type:
Code:
fastboot flash recovery your_recovery_image.img
Good luck
Click to expand...
Click to collapse
Hi, is it wrong to wipe the system partition before flashing a custom rom? Coming from stock ColorOS, I've wiped all dalvik cache, cache, system, and data, then flash a custom rom but it ended up getting endless bootanimation unable to boot into the custom rom.
I did unlock the bootloader with the adb code, flashing a temporary recovery was a success but endless bootanimation happened after flashing a custom rom. The custom rom was successfully installed according to TWRP's log.
Pls advice, thanks in advanced
P.s: I was referring to my friend's device X9076
Hi, i tried in the past some roms than not works, phone stuck in boot animation. The roms wich works for me and my x9076 with r63419 are:
Omnirom (6 or 5) THE BEST
Project Spectrum
Cyanogen 13 (modified version for new panel: http://community.oppo.com/en/forum.php?mod=viewthread&tid=44907&extra=)
Miui
If you install CM13, you need to flash unified partition script for CM13 (you can find it in the same post from the forum Oppo Community)
For the other roms i dont need to flash anything else than rom and gapps.
Now i give a chance to CM13, but i think that i will get back to Omni if developers dont fix the mobile radio issue.
Cheers
Can anyone guide me please, 1st time i bought MTK phone Oppo F7, its update automatically but suddenly dead like stuck on logo and restarting again and again, i didnt ever flash MTK phone, neither i have any android tool like MRT dongle or any other flash USB or Box... Kindly guide me step by step how to flash with which tool only USB cable and PC... Thanks in advance
Hi guys,
I've just updated to newest OOS firmware wich is 5.1.2 and I'm facing a weird problem.
Every time I flash codeworks TWRP and reboot to system, the next time i try to boot to recovery it boots to the original recovery.
It's like when I flash TWRP it doesn't remain persistent. When i flash it through fastboot and straightly boot from fastboot to recoverry I succeed to get in TWRP but as soon as I reboot to system and try to boot to recovery I reach the original OnePlus recovery.
Is anyone facing the same problem ?
And also do you have any idea about what i could do to solve this problem ?
Thanks in advance for your answers !
If you don't have root or custom kernel its normal, plus you should use blu spark's twrp, its newer and more reliable.
Adnan008 said:
If you don't have root or custom kernel its normal, plus you should use blu spark's twrp, its newer and more reliable.
Click to expand...
Click to collapse
Indeed, I just needed to flash magisk to get it persistent. I'll try blu spark's one as you suggested.
Thank you very much for your answer !
Cheers !
Nothing to do with recoveries or kernel. After you do the fastboot flash recovery TWRP in fastboot, do this: "fastboot boot TWRP". I believe that's the right command. Basically after you flash it, manually boot to recovery through fastboot one time. After that it'll work from inside the phone or with the button combination with the phone off.
Jesus people are lazy these days.
First off there are official twrp versions for a reason!
Download the latest version: https://dl.twrp.me/dumpling/
Reboot into flash boot with the following command from your rom: adb reboot bootloader
With phone in fastboot mode: fastboot flash recovery 'twrp.img'
(You don't need to type out the entire file path you can just drag the file into the terminal and it'll insert the file location)
The reason you're not getting back into that recovery is because you're not booting into the recovery before you reboot into your ROM.
There is an option to boot straight into the recovery from the fastboot mode
pinnekeshaar said:
Jesus people are lazy these days.
First off there are official twrp versions for a reason!
Download the latest version: https://dl.twrp.me/dumpling/
Reboot into flash boot with the following command from your rom: adb reboot bootloader
With phone in fastboot mode: fastboot flash recovery 'twrp.img'
(You don't need to type out the entire file path you can just drag the file into the terminal and it'll insert the file location)
The reason you're not getting back into that recovery is because you're not booting into the recovery before you reboot into your ROM.
There is an option to boot straight into the recovery from the fastboot mode
Click to expand...
Click to collapse
Actually not that lazy because I used to do what you mentionned.
The thing is that a flash of Magik is needed to patch twrp. That's the step I forgot in the procedure and explained here.
So before being unpleasant, please know what you're talking about...
Cheers !
Hello, I have sent my phone to warranty and after that I received a phone with NO RPMB and after many frustrations I found (with help of many users and forums) how to workaround this..
To start:
Download boot image from here
Download twrp from the official website
Change the name to boot.img and twrp.img and put it in the platform-tools folder
Open the terminal there
Download your favourite rom
Enter fastboot mode on your phone
!!!!After this you will loose all of your data!!!!
Paste this to the terminal
fastboot oem unlock
(select yes on your phone)
fastboot flash boot boot.img
fastboot flash recovery twrp.img
fastboot format userdata
fastboot format cache
Reboot to recovery (if it doesn't enter at the first time enter download mode again and restart to recovery)
After that you have twrp and can flash every rom.. yay!!!
Wipe everything.
Copy the rom zip to your phone using MTP
Install your fancy new rom
If you want to install magisk:
Install the magisk manager.
On the app select install and select patch image file. (it will create a new boot image already patched)
After that install the new image (patched_boot.img) using twrp
Do a clean instalation of your ROM (recomended) or a Factory Reset first
Reboot to twrp
Select install
Click in install image
Select patched_boot.img
Select install to boot partition
Reboot.
Install magisk manager and do the sugested setup.
You now have magisk working
Thanks to all the users that helped me!!
I had real trouble getting twrp to work the last time I tried this a few months ago. Followed the steps here and am now on pixel experience with magisk. Thanks!
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
sigibian said:
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
Click to expand...
Click to collapse
My bootloader is still unlocked after following this guide
For Magisk:
-Install your custom ROM and boot it up (without root)
-Then extract the boot.img from the ROM zip file and save it on your phone storage.
-Install the Magisk manager apk
-In Magisk manager, select install Magisk> choose the patch boot image option and -Select the boot.img you previously saved.
Once it's done, reboot into twrp and flash the patched boot.img. When you reboot Magisk will be working.
I've had no issues with my bootloader, even after an ota update for pixel experience.
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
sigibian said:
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
Click to expand...
Click to collapse
The official twrp works for fine for me, haven't tried the 4 core version but it can't hurt to try if you need it.
Power off your phone then press and hold volume - and power to enter bootloader, then connect to your pc and follow the steps in the OP
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
sigibian said:
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
Click to expand...
Click to collapse
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
baddesthad said:
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
Click to expand...
Click to collapse
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
sigibian said:
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
Click to expand...
Click to collapse
You need to use vol- and power to go into fastboot mode then connect to the pc. As for userdata and cache, if you don't clean them when coming from stock you will have issues (your data will be encrypted if you're on stock?). As I said this guide worked for me. The op was talking about fastboot mode in the 6th option (also there is much more information in the thread I linked above)
sorry for the confusing i wanted to say fastboot mode..
i knew the thread that you are saying but most people doesn't want to search so I made a little thread only with the needed parts..
I use it myself so I have a place to remember all the steps when I need to change the rom to a new one or when I make experiments and brick my phone XD
If anyone know anything else that should be in here just say, I really want to improve the post
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
fhartane said:
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
Click to expand...
Click to collapse
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
PedroM.CostaAndrade said:
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
Click to expand...
Click to collapse
Thanks for the answer. You mean that now I have twrp, I can flash custom Roms with my bootloader locked without any issue?
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
Yes if you have TWRP you can install custom ROMs, custom Kernel's, magisk, super su, etc..
the locked bootloader only prevents you from using fastboot commands like the one needed for installing custom recovery
Now that you have TWRP you can use it for everything
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Fabiojoker said:
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Click to expand...
Click to collapse
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Hello, thank you for your information, since I haven't done modding on phones for a long time, I didn't remember exactly the procedure with fastboot and therefore I didn't understand where I had to put the files, but in the end I did it.
Thank you
PedroM.CostaAndrade said:
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Click to expand...
Click to collapse
Why is a custom boot image needed? I don't want to root.
Hi.
So I was messing around with the twrp custom recovery and (without thinking much of it) wiped everything in the advanced wipe menu :crying: (System, data, EVERYTHING)
I knew I had removed my OS and that I could just use the twrp recovery to install a new rom onto my phone BUT little did I know, when I tried to boot into the custom recovery, it would just loop the screen with the redmi logo
I am still able to boot into fastboot mode, and I have tried to flash the same twrp recovery but with no avail (It still loops the redmi logo screen)
So now I'm here to ask if there is any advice that you could give me to try and fix this problem that I have gotten myself in (I am not worried about deleting any of my personal files. I would just like to get twrp to boot so that I can install another rom)
Thanks in advance to anyone who can help me with this problem :highfive:
Hi, which rom are you trying to install? for android 9 use this recovery https://forum.xda-developers.com/re...overy-unofficial-twrp-recovery-redmi-t4002397, for android 10 this one... https://forum.xda-developers.com/showpost.php?p=82062075&postcount=7...
If what nuvulet said doesn't work, in fastboot, flash the exact same stock ROM you had before, let it boot and then flash TWRP.
nuvulet said:
Hi, which rom are you trying to install? for android 9 use this recovery https://forum.xda-developers.com/re...overy-unofficial-twrp-recovery-redmi-t4002397, for android 10 this one... https://forum.xda-developers.com/showpost.php?p=82062075&postcount=7...
Click to expand...
Click to collapse
Hi, thanks for the fast reply.
The stock android I had before I wiped everything was android 9, MIUI 11. I tried againt to flash the recovery through fast boot but (like before) when I try to boot into the recovery (by holding the volume up button as it reboots), the redmi logo keeps appearing and disappearing and doesn't go to the twrp recovery. At the current moment I don't have any OS installed (since it got deleted when I wiped everything)
Any other leads I could try?
wang1chung said:
If what nuvulet said doesn't work, in fastboot, flash the exact same stock ROM you had before, let it boot and then flash TWRP.
Click to expand...
Click to collapse
I'm not sure how I can flash the stock ROM without the twrp recovery. I had the impression that you needed twrp recovery in order to install ROMs in the first place.
If there is a method to flash a ROM using fastboot, please explain since my unexperienced self has no idea how to do this. :laugh:
Thanks for the fast reply too
Sqorpz said:
I'm not sure how I can flash the stock ROM without the twrp recovery. I had the impression that you needed twrp recovery in order to install ROMs in the first place.
If there is a method to flash a ROM using fastboot, please explain since my unexperienced self has no idea how to do this. :laugh:
Thanks for the fast reply too
Click to expand...
Click to collapse
MiFlash works through fastboot mode. It's also safer to flash with MiFlash, just make sure you have the correct ROM.
I can't find the guide right now, I'm at work
Ok, do you know adb fastboot... if not, follow this guide...
https://forum.xda-developers.com/showthread.php?t=2317790
Install usb adb drivers for RN8P if you don't have, try this for w10...
https://forum.xda-developers.com/redmi-note-8-pro/help/usb-drivers-t4035617
Download twrp for android 9 or android 10 from here...
https://forum.xda-developers.com/showpost.php?p=82115341&postcount=2
Put the recovery (*.img format) into installed adb folder...
Open cmd and navigate to inside adb folder...
Put the phone into fastboot mode (press volume- and power) connect usb and type in console...
adb devices (this start adb server)
Type...
fastboot devices (this return a device number, if not, something is wrong)
Type...
fastboot flash recovery *.img (change * for the name of the recovery file)
Disconnect the phone and press volume+ and power at the same time and now you have twrp intalled...
When start if the data is encrypted, push cancel, go to wipe, go to format data, type "yes", and confirm slide...
Now connect the phone to usb (if not recognize the phone, go to mount, and enable MTP)
Copy the rom in to internal storage for your android twrp version... search here
https://forum.xda-developers.com/redmi-note-8-pro/how-to/redmi-note-8-pro-android-10-public-t4072795
You have several versions... for eu, search in my post...
And the rest, install, select, etc. etc....
nuvulet said:
Ok, do you know adb fastboot... if not, follow this guide...
https://forum.xda-developers.com/showthread.php?t=2317790
Install usb adb drivers for RN8P if you don't have, try this for w10...
https://forum.xda-developers.com/redmi-note-8-pro/help/usb-drivers-t4035617
Download twrp for android 9 or android 10 from here...
https://forum.xda-developers.com/showpost.php?p=82115341&postcount=2
Put the recovery (*.img format) into installed adb folder...
Open cmd and navigate to inside adb folder...
Put the phone into fastboot mode (press volume- and power) connect usb and type in console...
adb devices (this start adb server)
Type...
fastboot devices (this return a device number, if not, something is wrong)
Type...
fastboot flash recovery *.img (change * for the name of the recovery file)
Disconnect the phone and press volume+ and power at the same time and now you have twrp intalled...
When start if the data is encrypted, push cancel, go to wipe, go to format data, type "yes", and confirm slide...
Now connect the phone to usb (if not recognize the phone, go to mount, and enable MTP)
Copy the rom in to internal storage for your android twrp version... search here
https://forum.xda-developers.com/redmi-note-8-pro/how-to/redmi-note-8-pro-android-10-public-t4072795
You have several versions... for eu, search in my post...
And the rest, install, select, etc. etc....
Click to expand...
Click to collapse
Yes, this is the method I used to flash the twrp recovery.
My problem was that even after installing it (using this method), i would still not be able to boot into the recovery.
However, it is fixed now. I used the Mi Flash tool in order to install the stock rom and then installed twrp after that. :good:
wang1chung said:
MiFlash works through fastboot mode. It's also safer to flash with MiFlash, just make sure you have the correct ROM.
I can't find the guide right now, I'm at work
Click to expand...
Click to collapse
I tried this method and IT WORKED!!
After installing Mi flash I was able to download the stock rom and install it through the program without any errors.
I was then able to finally boot into the OS and install twrp recovery, then install the custom rom! :laugh:
Thanks for this method. I would probably still be stuck on the Redmi logo if it weren't for this