Related
I m looking for a nice case on eBay that is not more than $50. Which case is your favorite and why?
Sent from my Galaxy Nexus using xda premium
I dont usually buy on ebay so i cant help much there. But i can tell you all the cases ive tried.
Otterbox Defender - did not fit well so i did not purchase at the store. Screen protector is lousy. Phone rattled in case.
Casemate Toughcase - again did not fit my gsm nexus well. Gaps in silicone and i do not like the larger than necessary gap between the usb and headphone plugs. Also was a dust magnet. Should have learned my lesson with the first toughcase i tried for my galaxy s.
Diztronic TPU - have two of these. Rev 1 both in matte black and matte smoke. Great cases except the volume rocker section but Rev 3 should address that. I recommend.
Rearth Ringke Slim - currently using this case. Color i have is matte black and it is a great case.
Case Mate POP! It is not too bulky, offers good protection, good grip without attracting lint. Fits the extended battery perfectly.
lynseyw said:
Case Mate POP! It is not too bulky, offers good protection, good grip without attracting lint. Fits the extended battery perfectly.
Click to expand...
Click to collapse
I have the casemate pop and Love it, but I need to use my ebay bucks so I figured why not get another case.
Had 3 cases for my Nexus as my review for them are as follows:
Case-Mate Barely There - Price was too high considering the kind of case you were getting. As it's known for, it provides very little protection but was also very slim. I would have less issue with it if it covered the top and bottom of the phones fully but it oddly didn't. With it on, it looked more like a shell instead of a case. I would not recommend this as it seems like you are paying for brand name here. Might as well get a full body protector from Zagg or Ghost Armor instead of this IMO.
Otterbox Commuter - This was a good case. If you are looking for something that will protect your phone without being extreme (like using the Defender) then this is perfect. Adds bulk for protection but also looks great as well. Best of both worlds and recommended for those that want above average protection while not needing it to look like a beast. Fairly difficult to take off so don't get it if you get into opening up your phone a lot.
Diztronic TPU Matte Smoke Grey - This was the best of the bunch for me. Price wise, it can't be beat at $10.00 with a workable screen protector. Looks wise, smoke grey is beautiful on the Nexus as it looks natural (Nexus is grey to begin with). It adds only a little bulk so it doesn't look like a case swallowed your phone. Feel wise, matte is definitely the way to go. I've had glossy cases before and it always left grime, oil, and fingerprints. Matte feels and looks very clean and provides a little grip. Protection wise, I'd say it provides average protection. I've always used TPU cases and they can take drops from normal heights. TPU is fine for my rather un-extreme lifestyle. Finally, Diztronic's customer service is top notch. Had an issue with the volume keys and they are sending me out a replacement case with the keys cut out. No need to return the old one. Would definitely buy from them again because of that as I have high confidence that they can rectify any issues.
So there you have my mini-reviews. It is obvious that I favor Diztronic as they seem to hit the sweet spot for my preferences. Best of all words in all the things that are important to me.
Hope you guys find a case that works well for you too.
Enhanced said:
Diztronic TPU Matte Smoke Grey - This was the best of the bunch for me. Price wise, it can't be beat at $10.00
Click to expand...
Click to collapse
Is there a Canadian source for these?
ChrisAG said:
Is there a Canadian source for these?
Click to expand...
Click to collapse
From their website at www.TPU-cases.com. Free shipping too.
sabooher said:
Rearth Ringke Slim - currently using this case. Color i have is matte black and it is a great case.
Click to expand...
Click to collapse
Mind posting some pics of this? Thanks!
I don't know if they have one for nexus but case-mate barely there series of cases are cool because they are the thinnest but are still shatter proof. I have never liked adding bulk to my phone with a case so it works for me.
xlxcrossing said:
I don't know if they have one for nexus but case-mate barely there series of cases are cool because they are the thinnest but are still shatter proof. I have never liked adding bulk to my phone with a case so it works for me.
Click to expand...
Click to collapse
They may be shatter proof, but they only protect the better cover and rear sides of the phone. It's a half-solution at best. Waiting on Rearth and will report back.
sabooher said:
I dont usually buy on ebay so i cant help much there. But i can tell you all the cases ive tried.
Otterbox Defender - did not fit well so i did not purchase at the store. Screen protector is lousy. Phone rattled in case.
Casemate Toughcase - again did not fit my gsm nexus well. Gaps in silicone and i do not like the larger than necessary gap between the usb and headphone plugs. Also was a dust magnet. Should have learned my lesson with the first toughcase i tried for my galaxy s.
Diztronic TPU - have two of these. Rev 1 both in matte black and matte smoke. Great cases except the volume rocker section but Rev 3 should address that. I recommend.
Rearth Ringke Slim - currently using this case. Color i have is matte black and it is a great case.
Click to expand...
Click to collapse
Case-Mate Tough Case: http://forum.xda-developers.com/showthread.php?t=1420043 they're working on it.
I had bought a Case Mate Tough skin case for my phone, and it's had a lot of issues with the power button fit, it would turn off and on by touching the area anywhere near it. I looked around case-mate.com and noticed this case is not on their website, so I contacted Case Mate and they say it's a known issue, and are going to ship me a new one when they come in sometime during in the next 2-4 weeks.. Good customer relations.
Click to expand...
Click to collapse
Ghost Armor...
No added bulk, adds just enough extra grip, protects from scuffing/scratching. Obviously, not gonna give the same shock protection in a fall.. but then I've seen guys with TPU cases drop the phone and shatter a screen. (with gorilla glass)
http://www.dropbox.com/gallery/50315473/1/Ghost Armor?h=ea117b
Just got my Seidio Active today. As with all Seidio cases, it is awesome. I had the Incipio double case from Verizon, which is a similar concept. But the Active is a lot smoother and looks way better. Great amount of protection, minimal bulk. I actually prefer the way it feels with the case on compared to bare. It gives a nice feeling to the volume/power buttons.
As a bonus, I got the Royal Blue one, and the color perfectly matches the blue theme of ICS. I highly recommend it. There is also a version with a kickstand, too. Here is a link to what I got.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSK3SSGNL-RB
I'm a bit of a Seidio fanboy, as all of my devices have Active cases on them. But you can't really beat the protection and style. No huge logos, and the color of the hard shell really gives it a nice look. Dropping the phone with the case on barely does anything to the case, let alone the phone.
IXIKelsonIXI said:
Just got my Seidio Active today. As with all Seidio cases, it is awesome. I had the Incipio double case from Verizon, which is a similar concept. But the Active is a lot smoother and looks way better. Great amount of protection, minimal bulk. I actually prefer the way it feels with the case on compared to bare. It gives a nice feeling to the volume/power buttons.
As a bonus, I got the Royal Blue one, and the color perfectly matches the blue theme of ICS. I highly recommend it. There is also a version with a kickstand, too. Here is a link to what I got.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSK3SSGNL-RB
I'm a bit of a Seidio fanboy, as all of my devices have Active cases on them. But you can't really beat the protection and style. No huge logos, and the color of the hard shell really gives it a nice look. Dropping the phone with the case on barely does anything to the case, let alone the phone.
Click to expand...
Click to collapse
I have the kickstand-ed version and I must agree that it is a really well designed enclosure system. Works really well with the extended battery/cover. My previous Seidio case was the Active Extended for the Thunderbolt and that setup was the main reason why I decided on Seidio.
This is my favorite case and its probably the best value.
http://www.myincipio.com/Samsung-Ga...CRYLIC-Hard-Shell-Case-with-Silicone-Core.asp
It features 3 layers including the screen protector and doesn't make the phone huge, yet keeps the phone well protected. $29.99 and I couldn't be happier.
Sent from my Galaxy Nexus using Tapatalk
Went with a casemate pop over my usual Otterbox commuter choice. And am completely satisfied with its impact protection. Adds bulk but most do. Also grabbed a few TPU's off ebay for some variety. Coupled with some Carbon Fiber Ghost Armor. Im loving my (GSM) SGN
Sent om my Galaxy Nexus using Tapatalk
http://www.ebay.com/itm/TPU-Cases-S...s=63&clkid=5450595014366325529#ht_2001wt_1139
i think this is the best tpu case i have ever gotten for any of my phones.
TPU cases usually cover the buttons and make it very difficult to press buttons, or may be slightly too big for the phone so its not a snug fit.
This case that i got for the phone fits it perfectly, no loose sides, its tight just like how a condom should be
PROS, buttons are cut out, and its matte, great feel, fits perfectly
CONS, 10 bucks for a tpu case?? >:[ being that usually they're $2-5!
buy it! im happy with the case check it out!
I second this; it's a nice case (I don't have any experience with other cases, though). I got it from Amazon.com for around $6.
I will also second that, great case, I also have the trident aegis which is great when I am at work, other wise I change to this case when I am at home.
yep...great case still one of my favorites
Agree! this case is amazing. I also have the D30 from T-mobile store. Both are very good. But the D30 offers more protection.
I have this case as well. I got it on amazon for $11
Fits very well, all buttons are easily accessible. I also bought an Xtremeguard screen protector (screen, back, and 4 sides) but with this case the back and sides are superfluous. Smarter shopping and you could probably get a screenprotector + this TPU case for about $12 and get great protection for your phone.
i agree, this is the best tpu case ive ever owned or used. its cut outs for the buttons make it feel like the case isnt even there and its super thin and fits great. i got mine for 11 on amazon but i got the smoked clear one. here is some pics if it helps anyone out. just make sure u get the Revision 2 one. because i guess the first cases they made blocked the mic at the bottom. u can see in my pics that mine isnt blocked because its the Revision 2 version which they fixed that issue
Save a couple of bucks:
http://forum.xda-developers.com/showthread.php?t=1385705&highlight=tpu
vw671 said:
Save a couple of bucks:
http://forum.xda-developers.com/showthread.php?t=1385705&highlight=tpu
Click to expand...
Click to collapse
it's glossy though. me no like gloss
androidtoy09 said:
it's glossy though. me no like gloss
Click to expand...
Click to collapse
lol same here. mine isnt glossy, which is why i like it. plus the gloss makes the phone feel slippery in the hand lol
s10shane said:
lol same here. mine isnt glossy, which is why i like it. plus the gloss makes the phone feel slippery in the hand lol
Click to expand...
Click to collapse
It's actually not slippery at all. There is a bit of tacky-ness to it from the TPU material.
Just got this last week from Amazon and it's amazing. Definitely the best one hands down.
So after seeing pictures of it for a while and finally seeing peoples reviews for the case i finally bought the infinity white case. I already had a couple of ebay cases while i was waiting to get something a little more "premium" so i pulled the trigger on the Neo Hybrid. I received it today and have to say it is not what i expected.I already knew about the buttons being too sensitive and the case being more purple than blue so no surprises there, but being advertised as a tpu case i thought this would fit the phone much more tightly the way every tpu case ive ever bought off of ebay for $2 has felt. the tpu portion of the case was either made too large or from a different kind of material because it feels loose on the phone to me. the bumper that goes around the case is meant to keep the tpu tight to the phone, and perhaps add another layer of protection but it tpu along the front of the screen feels very loose and is even a bit sharp to the touch because of its square shape. this is the case i had been using for the past month and i loved the feel, but not so much the look of it. I actually couldnt decide which color i wanted and bought the orange one as well a couple of days ago and it looks like ill be sending them both back in favor of my $4 ebay case.
http://www.ebay.com/itm/Black-PC-TP...670415?pt=PDA_Accessories&hash=item1e6f7fe08f
Just a quick question, did you get the Neo Hybrid Lumi or the Color?
it was the color series with the purple/blue case and white bumper frame, now i have an orange lumi on order and i can only assume it is going to have the same feel to it. way more bummed about how loose the case feels and the way the rim around the screen is really jagged feeling and not rounded at all.
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
King Shady said:
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
Click to expand...
Click to collapse
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
I don't have one yet but I am very disappointed in the colour selection. How can you not have a black/black like all the others before it? The old ones never sagged on me so I personally want a black/black with the good old silicon and polycarbonate frame.
Don't see it happening though.
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
misha25 said:
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
Click to expand...
Click to collapse
I emailed them about the button issue too. They seem to know about it and said I'm getting an updated version of the Color in mid-August.
lsv-1 said:
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
I ordered their leather pouch because I seriously loved their screen protectors. The pouch was so tight I had to use a razor blade to cut the seams to remove my phone. The pull tab broke off as I was trying to remove my phone with it.
i think theres something to be said for mass producing cases. all the generic ebay tpu cases seem to fit perfect, havent had an issue yet. they all fit nice and snug, cutouts are perfect, the buttons arent as tactile and clicky as more expensive cases but theyre still easy to press
I agree with the OP, I got the neo hybrid lumi in green and I think that this case just feels cheaply made, this is definitely not worth paying $26. My cheap tpu case I got off eBay for 3 bucks is 100 times better than this. The camera cut off holes for this aren't even properly aligned and the case does not fit the phone very well. And also with the issue with the buttons. I highly suggest that no one should buy this case. It's a terrible case and cheaply made and over priced. I'm disappointed with the way this case turned out. I put a bad review on SGPs website to warn other buyers but they would not even post my review. Screw you SGP lol
Sent from my SGH-T999 using xda app-developers app
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Yonatanl2 said:
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Click to expand...
Click to collapse
I highly suggest you go with the incipio case. The Sgp case is not worth it.
Sent from my SGH-T999 using xda app-developers app
Hey Angie have you had any other cases for your gs3? If you notice while the case is on the phone the bit that runs around the edge of the screen can be moved very easily. The band is what makes the case stick to the phone and difficult to take off. My dislike is with the actual tpu case. Which is much more flimsy and soft than most tpu cases
no the band is the only thing that fits the phone well, im referring to the bit on tpu that sticks out past the band around the edge of the front glass, if you nudge it at all its very lose and also is very angular and uncomfortable to touch
angie4u said:
that is so weird because i have no issues with the cameras and holes not aligning with the cutouts, as you can see from the pictures. And the fit is very snug. This is my first SGP case purchase so did I just get lucky? I haven't use the Incipio so I cant compare the two but in terms of bulkiness, I don't find this to be bulky at all. it's very thin and sleek. However, if you are looking for something that's very durable, this might not be the case for you.
Click to expand...
Click to collapse
Yeah I think you did get lucky, because the cut out on mine was not even centered like how it is with yours. The holes on mine came down more to where the camera, lights and speakers are. And in the front, the top part of the tpu covered the silver bezel but hardly covered the bottom part. Close enough to where it looks like the tpu was sagging. I was so pissed that I literally wanted to cover the case in gasoline and burn it for how ****ty, it was lol. I honestly think that the feel of the case just feels so cheap. I have a few other tpu cases I purchased on eBay at a much cheaper price that felt more of a high quality than that piece of crap that sgp made lol. But alas, I returned it back to sgp with an e-mail stating that they did a piss poor job with the case lol.
Sent from my SGH-T999 using xda app-developers app
I guess I'm another of the lucky ones. My cutouts fit perfect, and I have no issues (besides the whole oversensitive buttons issue) but I can relate to the whole "looseness" thing.
As far as TPU cases go, the NeoHyb is definitely not cut to be "tight-fitting" like the some of the other TPU cases I've seen. Without the band, the TPU base IS loose fitting.
With the plastic band though, the entire assembly is tight enough that any attempts to pull it off usually takes the battery cover along with it.
Also, the TPU is more pliable and softer then most other TPU cases I've seen, which makes the "loose" feeling even worse, but I take it it's made that way for better impact absorption.
It's definitely not soft and stretchy like silicone though, which I hate.
So, is the NeoHybrid a perfect case? No. The plastic band is too thin, too slippery. The TPU back is not rough enough. The buttons don't really work without modifications. The TPU rim around the screen, as the OP said, feels "sharp" enough out of the box to be slightly uncomfortable.
Yet, for some God forsaken reason, I like the bloody bugger and I think 20 odd dollars is a fair price for it - considering I've dropped the phone a couple of times already and the case has been doing what it's paid for with aplomb.
YMMV though.
I DO have the Incipio Faxion - another TPU/Polycarb hybrid case I've seen out there - on order though, and plan to do a comparo as soon as it arrives.
Considering I got both at around the same price, it should be an interesting comparison.
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Tomatoes8 said:
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Click to expand...
Click to collapse
Doesn't feel super soft to me.
Sent from my SGH-T999 using xda app-developers app
angie4u said:
did you check if the reseller was selling genuine SGP product? because i almost got a GLAS.t screen protector from a site that was selling it like.. $8 cheaper than SGP but I wasn't sure so I emailed them.. they told me they were fake. maybe it was poorer quality because it was imitation.. but it boggles my mind why anyone would want to imitate $30 items...
Click to expand...
Click to collapse
I ordered it straight from SGP when they were doing the pre orders. So I'm pretty sure it's genuine unless they're lying and are just making some fake products. They gave me my money back though so it's all good. I'm pretty sure those cheap imitations probably turned out better than their genuine product lol.
Sent from my SGH-T999 using xda app-developers app
Hi. I am looking for protective cases, does not have to be super thin. Would really like something that feels premium in the hand and would have good grip.
So far considering for work/sport:
Spigen Neo Hybrid
Tough case (too large maybe)
Rugged armor
Caseology parallax
Real leather case with no flip cover would be nice also
Thanks!
Caseology parallax my choice, second Spigen
I bought this one almost a year ago. It comes in a few colors. The back is metal and it's pretty darn tough. It will block a wireless charger though. You'll have to take the case off if you want to charge it that way. It also comes with a tempered glass screen protector. Pretty good deal for $11.https://www.amazon.com/gp/product/B06XS3J4YJ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Currently using.
https://www.amazon.com/Ringke-Fashionable-Pyramid-Stylish-Protection/dp/B01N6TULL9
I just got a new G6+ this week and was looking for the same thing. I am trying out this one below from Amazon (sorry I can't paste a direct link yet). It doesn't have the nice smell of real leather, but is pretty nice quality for the price (clean lines, good fit, nice feel in the hand).
www_DOT_amazon_DOT_com/gp/product/B0711F5RCV
Men, i see a lot of people saying its the Rignke AIR Prism, and i can confirm! Its the most beautiful, stylish and eye catch case you ever have, i love it!
Even not to talk this case have dust covers for headphone jack and USB C, its all i need.
*sorry for the bad quality pics, bad lighting!
thanks buying right now!
sun_is_shinning said:
Men, i see a lot of people saying its the Rignke AIR Prism, and i can confirm! Its the most beautiful, stylish and eye catch case you ever have, i love it!
Even not to talk this case have dust covers for headphone jack and USB C, its all i need.
*sorry for the bad quality pics, bad lighting!
Click to expand...
Click to collapse
crisout said:
thanks buying right now!
Click to expand...
Click to collapse
buy here:
https://www.ebay.com/itm/LG-G6-G6-P...hash=item465e8a67ea:m:mNXhcspxOnxQvsw7CVbpwqw
its Ringke direct store from Korea, i buy mine here too and is quick shipped and received, 13/14 days.
I use and like very much the Speck Presidio Grip. It's both protective and, at least in black, discrete.
RebDovid said:
I use and like very much the Speck Presidio Grip. It's both protective and, at least in black, discrete.
Click to expand...
Click to collapse
I second this. Great case.
Spigen Rugged Armor Extra
I'm using a unicorn beetle case.. It's a little big but protects everything.. I'll upload pictures if anyone wants to see... They even cover the aux and charging port as well
I need to buy a new case for my prism white s10 plus. The UAG SERIES looks impressive. Please suggest one for me. The pathfinder black one seems to be a good choice but I'm confused with the monarch. Also, which color is better in monarch
vishnu2626 said:
I need to buy a new case for my prism white s10 plus. The UAG SERIES looks impressive. Please suggest one for me. The pathfinder black one seems to be a good choice but I'm confused with the monarch. Also, which color is better in monarch
Click to expand...
Click to collapse
Monarch Red
Monarch is great!
The UAG cases are nice, but I refuse to pay $55 for a piece of plastic. Hhheeelll no!
vishnu2626 said:
I need to buy a new case for my prism white s10 plus. The UAG SERIES looks impressive. Please suggest one for me. The pathfinder black one seems to be a good choice but I'm confused with the monarch. Also, which color is better in monarch
Click to expand...
Click to collapse
NVM
I like the blacked out Monarch myself and it's one of my favorite cases.
mistermidas said:
The UAG cases are nice, but I refuse to pay $55 for a piece of plastic. Hhheeelll no!
Click to expand...
Click to collapse
But paying 1000$ for a phone is pretty sane =)
Have you previously used a UAG case? They look nice on paper but are bulky, uncomfortable to hold and feel like they are made from cheap materials when actually on your phone.
I ordered mine directly from UAG so I know it wasn't a knockoff and I hated it. I expected it to be more like an Otterbox case I guess in terms of providing a comfortable grip. UAG cases are definitely not grippy.
Some people do swear by UAG cases.
Have you looked at supcase? its a good alternative to uag especially if you go with the unicorn beetle series. I currently have one on my s10+ and while it isn't advisable, it has survived a fall from a scaffold at eaves level, with no major damage just a scuff to the the back plastic.
I had a UAG case for my note 8 and it was very uncomfortable in the hand.
I wouldn't say that the supcase is better for comfort just different. It has less pronounced ridges on the back but the sides seem thicker. It has raised rubbery nubs on the back in the corners to stop it sliding. A feature I didn't think would get much use on the supcase case was the kickstand, but I can safely say it is one of my most used features on the case, it is very stiff in the beginning for clipping in and out but with a little use becomes smooth and long lasting. its good as a handle in the hand and ,when standing, supports the phone vertically and horizontally
and it is £30 cheaper still military grade drop tested I highly recommend as I think the build quality is as good if not better than the note 8 case I owned
corb06 said:
But paying 1000$ for a phone is pretty sane =)
Click to expand...
Click to collapse
Yeah it is. Especially when you consider the phone is more technically a powerful multi-core computer which fits in your pocket, that is also capable of making calls...and the case is literally ONLY, a case.
I never have and never will spend more than $20 on a case, when all it is, is just a glorified piece of plastic and rubber.