Related
Hello Guys!
As you know, lots of people root their phones only for Viper4Android. It Increases the audio output of your phone x5 times*
So What You'll Need.
1. BusyBox
2. Latest Version Of BusyBox By stericson
3. Latest Viper4Android Version.
4. Motion Based Roms
--- Disclaimer ---
Me Neither XDA take responsibilty for what you do to your phone. It is you who are modifying the files and you take all the responsibilty. Don't ask me for help if you mess things up. Please take a Nandroid backup before you proceed. Please read the whole guide for full results
--- STEPS ---
•Install BusyBox by stericson from playstore.
•Install BusyBox on your phone
•After BusyBox installation, Launch Viper4Android and install the driver
•Re-Boot your phone
•After Re-Booting, launch Viper4Android and you will get an error message! Don't worry tho, you will not face any problems. Close Viper4Android
•After Closing, open Build.Prop with your root browser or any other browser with editing capabilities.
•Find This Line and replace-
lpa.use-stagefright=true
To
lpa.use-stagefright=false
•Save the file
•Then, Go to setting and application manager
•Go to the all tab
•Search SoundAlive and disable it(Nothing wont happen)
•Re-Boot Phone!
•Now play any song and see if the driver is processing the audio.
(TO SEE IF IT'S PROCESSING, OPEN VIPER4ANDROID AND TAP THE 3 DOTS ON TOP RIGHT CORNER, TAP ON DRIVER STATUS AND CHECK . )
--- THAT'S IT ---
Now you can tune the setting of viper4android to your heart's content.
--------------------
For Advanced Users -
Tap on 3 dots and selct UI Settings, select your option and go on...:laugh:
TESTED ON : GT-I9300I, Running Project Lucky V1.1 ROM, Android 5.1.1
Guide By - SnapDrag910
Bugs - Driver Restarts itself while playing audio. It takes a second for it to switch off and restart.
*** IT DOES NOT WORK ON CM 11 OR 12 BASED ROMS ***
Press The Thanks Button if i helped you!
I used Viper4Android on Cm 11 , 12 and 12.1 so it can work with them
for solving the bug if restarting drivers use this sound mod it's better than normal Viper
https://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
I used it to on pl 1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys! You may ask yourself what this rom is about and what you can expect from it, so it's basically something similar to the SuperMan-Rom on the Galaxy S7/S7 edge, but based on the latest and greatest software of the s8+. I was able to make a full port of the s8 (with almost all libs being s8) and I also made a backport of the latest Mali GPU driver (if you install this rom, you will be one of the first to be have a ported Mali GPU!).
! It has many custom featuers, you will find it below in the feature list :thumbup:
As you maybe know I'm a little fanboy from samsung, means I really love the stock look of the UI and the rom will always be based on most recent version from samsung, current base used is G955FXXU1AQK7 (compatible with S7 and S7e)
I wish you much fun reading through the features and while using this rom! Enjoy
So this rom should be installed by anyone loving to use a rom close to stock BUT with many mods inside aroma/rom control.
Also I'd like to make the already fast galaxy s7 even more faster as it already is! Let's see if we can reach this goal
Nobody is allowed to take stuff from my rom without asking me! Thank you.
IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Rom features of V1.5.0 Nougat:
- Based on latest G955FXXU1AQK7 Nougat base
- Prerooted with SuperSU V2.82 SR5, Phh root r310 or MagiskSU (choose in aroma)
- Magisk V14.5 (aroma selectable)
- Latest Busybox installed (aroma selectable)
- Aroma installer! with support up to 4GB zip files
- CSC features can be choosen and installed in aroma (such as Applock, Floating Message, Call recording and more!)
- Adblocker enabled or disabled (choose in aroma)
- Full rom control!! App name is BatMan Settings Free
- Fully deodexed (also framework)
- Rom informations and logo inside settings
- LED indicator settings
- choose IOS or stock emojis in aroma
- DM-Verity disabled
- Force encrypt disabled
- ADB fully working
- Modded SystemUI with many tweaks in RomControl (like header colors, qs colors and notification colors)
- 3Minit Clock/battery in romcontrol
- Custom clock positions and customizations in romcontrol
- USB Plug/Unplug disable wake up
- Remove high volume warning for headphones
- Torch on lockscreen
- Use volume key on lockscreen to switch music titles
- Knox stuff can be choosen in aroma
- Back to kill (in RomControl)
- Stock Kernel or BatStock-Kernel(choose in aroma)
- Based off from latest touchwiz source available at this moment
- Many apps are selectable in aroma debloat menu
- Selinux permissive on custom kernel
- Ram bar in recents
- Matrix animation in recents
- Sound Mod with lot improvements! (choose in aroma)
- Latest November Security Patch
- Many other features, can't list them all, please read changelog to see what changed over the time
Rom review by @shark jungle:
How to install the rom:
For advanced users:
0. Make sure to have a backup somewhere on external storage
1. Make sure to be on most recent TWRP, bootloader and modem
2. Flash the rom
3. If you need VoLTE or Wifi Calling, flash your correct carrier CSC
4. Done
For normal users:
0. Boot your phone, enable OEM unlock in developer settings
1. Flash TWRP with Odin (if you don't have odin, download it here), following this thread S7 TWRP until it works correctly (to access download mode, press home+volume down+power on while phone is turned off)
2. Make sure you are using most recent bootloader and modem, latest one available here on Android File Host
3. Now boot into TWRP by pressing home+volume up+power on while phone is turned off
4. If TWRP asks you about allowing system to be edited, swipe yes to confirm
5. In TWRP, go to wipe, format data (a keyboard will pop up now), type "yes" (this will wipe all your data, make sure to have a backup!)
6. After this, reboot recovery and start the rom installer
7. Select your preferences in my aroma installer
8. If you selected to auto update bootloader in aroma, the installer will reboot automatically
9. You can still install my CSC selection if you are customer of a carrier which is not supported by default CSC inside the rom
10. Wait till the rom boots up
11. After setting up, open BatMan Settings Free and let the app apply my default settings!
12. Enjoy the rom!
Downloads for SM-G930F/FD/K/L/S/W8:
V1.5.0 on Android File Host
Download via our Server (you need to be signed in)
Bootloader/Modems SM-G930F/FD/K/L/S/W8
CSC Selection V1.2.5
BatStock-Kernel for S8 Ports
Useful Links:
Our new Grifo Development website
GrifoDev Thread for Beta testing
Telegram BatMan News Channel
Telegram BatMan-Rom Chat
Telegram Dark Knight Theme
Known Bugs:
- Iris scanner (if you know how to implement an iris scanner into a s7 let me know )
- face unlock by samsung, we have face unlock by google
- Knox related features such as secure folder, samsung pay or samsung pass may not work any longer after rooting your phone
Credits:
- Samsung for the base
- SuperR for his awesome Kitchen
- Chainfire for his SuperSU
- topjohnwu for systemless Magisk V13.1
- amarullz for aroma and nkk71 to make it compatible with bigger zip files
- wubydax and daxgirl for basic RomControl
- myellow for all the great animations!
- TheFreak for his work as designer and his help with the website
- mwilky for his fingerprint after reboot mod, the colors control and other mods, help with private mode
- Asc1977 for a few mods I already used on SuperMan
Support:
If you enjoy this I would be really lucky if you would hit thanks :victory:
And if you really really like it, here is a donation link
:good:
PayPal
BM Settings App on PlayStore
XDA:DevDB Information
BatMan-Rom SM-G930F, ROM for the Samsung Galaxy S7
Contributors
Tkkg1994
Source Code: https://gitlab.com/Tkkg1994/BatMan-Rom
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Custom TWRP Recovery
Based On: Stock Based
Version Information
Status: Stable
Current Stable Version: V1.5.0
Stable Release Date: 2017-12-01
Created 2017-07-12
Last Updated 2018-02-16
Changelog:
BatMan-Rom V1.0.0
- Initial Release on XDA
BatMan-Rom V1.1.1
- Rebased on latest AQF7 release
- June security patch
- Fixed the gap in pulldown menu
- readded private mode
- added a switch in RC for immersive mode
- updated csc to AQF7
- added a switch for wake the device with the volume buttons
- fake system status to official
- removed camera mod, it didn't work anyway
- updated magisk to latest v13.1
- updated all kernels with AQF7 base
- updated supersu to v2.82 sr1
- made the rom compatible with s7/s7e edge devices
- added an option to control icon colors/progress bars etc
- added a custom music apk to be colored (thanks to @Therassaad)
- many more things, check out the rom
BatMan-Rom V1.2.0
- Rebased on latest AQGB release (I know AQH3 is out, but until samsung releases a new kernel source it normally takes a few weeks that's why this base is used for now)
- July security patch
- Added navbar icon colors @mwilky
- Added navbar to get colors from statusbar (as long as the app doesn't set a default color) @mwilky
- Added in "misc" batman settings to disable touchkey light (s7 only of course)
- Readded custom color selection for navbar in stock settings
- Removed a few camera mods which weren't working
- Updated CSC to AQGB, also added all CSC in OMX (including BTU)
- Updated all Kernels to latest source and ramdisk
- Updated SuperSU to 2.82 SR3
- Added a the S Power Planning feature (forward ported from galaxy j7 prime), choosable in aroma as a csc mod
- Updated OperaMax apk to not show as chinese apk, many people meant it's a trojan lol
- Updated adblocker host file
- Updated all included modems and bootloaders
- Added a stock kernel even for the s7, so you can choose stock there as well!
- Updated Magisk to latest V13.5 beta version
- Added modded camera into aroma @zeroprobe
- Added 100+ fonts apk into aroma
- Updated busybox to most recent version
- Updated dual speaker mod to most recent version
- Added VoLTE and wificalling into pulldown menu
- Reduced download size to 3GB only (hahahaha only 3GB )
- Include sticker fix by default
- Use much less s7 libs, I hope to fix: camera crashing and some call issues with this!
- Included google face unlock, you find it in security, smart lock (to get samsungs one working I'm almost sure it's hardware related), but at least face unlock works!
- The scripts do now change build.prop to G930/G935 if a s7 model is detected, this fixes: wallpaper stretch, samsung vr. However if you wish you can always change that back to G950/G955 in aroma, there is an option for this!
- Updated all libs from s7 with latest base libs from DQG1
- Game tools: I still couldn't figure out why the systemui now even crashes. Samsung integrated the navbar even more deeply into the system this time. On some point I won't be able to fix the game launcher crashing and you will end up not to include it or using the navbar. I'm really sorry that I failed with fixing this one
- Small other changes which bring hopefully less issues!
BatMan-Rom V1.3.0
- Rebased on most recent AQH3 firmware update
- August security patch
- Added navbar height tweak @mwilky
- Added force expand notifications @thereassaad
- Updated all kernels to most recent source drop and linux version
- Updated magisk to V13.6
- Updated SuperSU to V2.82 SR3
- Added batman gif animations
- Fixed gif overlapping device informations
- Readded autostart manager in modded settings
- To disable the volume warning, there is now a switch in notification panel options to enable/disable it
- Fixed long press back not bringing up menu @mwilky )
- Removed OTA Updater. This services is outdated and not working anymore.
- Readded touchwiz double tab features! Double tap anywhere on launcher to do custom actions (the only thing which does not work yet is starting the torch light)
- Updated samsung music to most recent version with all the custom mods thanks to @thereassaad
- Fixed next alarm on lockscreen showing the wifi icon
- Fixed heads up display not working when switching in RC
- Added a new custom signal icon
- Edge lightning can now be customized! Choose a custom color OR if it should take the color from the app itself!
- Added alarm volume control to sound
- Fixed adaway app not being installed even if you selected adblocker
- Removed viper mods, since they can easy be outdated it's better to keep them outside. I hope people will go and visit the threads of the sound mods
- Updated included bootloader and modem to most recent version
- Updated csc to AQH3
- Added many new CSC mods, BUT BE AWARE, 5 SIGNAL in statusbar kills Wifi-Calling/VoLTE!
- Removed the last not working camera mod: video collage!
S7 specific changes:
- Delete the gameoptimizer in /system/app so games won't crash on startup (only if no navbar is selected)
- Fix SystemUI crashing if no navbar is installed (thanks to @mwilky )
- Use a special made framework.jar file for s7 devices, this should bring much better batterylife!
- Maybe some more things I already forgot, have fun!
BatMan-Rom V1.4.0
- Rebased on most recent AQI7 firmware update
- August security patch (there is no single september security patch released by samsung)
- This base fixes blueborne problems (which was samsungs main goal)
- Updated all kernels to most recent source drop and linux version (AQI7 for S8 and DQIC for S7)
- Updated magisk to V14.2
- Updated SuperSU to V2.82 SR5
- Added memory cleaner next to brightness slider
- Added listview animations thanks to @asc1977!
- Added a new telephony icon to romcontrol
- Added quickunlock thanks to @mwilky and @Grouxho
- Added Xposed V88.1 for magisk, why only magisk? Stock xposed can't be installed via an aroma script to-date, hoping rovo will change this in the future
- Updated all busybox to latest 1.27.1
- Updated adblocker
- Fixed lags in notification panel, for custom edge lightning you simply need to update the edge lightning service with samsung store!
- Fixed USB wakeup switch not working
- Updated launcher to support gestures even with latest update
- Updated included bootloader/modems for F/FD models
- Maybe some more things I already forgot again
S7 specific changes:
- Fixed game launcher crashing without navbar thanks to @Grouxho
- Updated face unlock by google
- Updated all libs/files to DQIC base
BatMan-Rom V1.5.0
- Rebased on most recent AQK7 firmware update
- November Security patch included
- This base fixes krack problems (krack explained: Krack)
- Updated all kernels (AQK7)
- Updated Magisk to V14.5
- Updated Xposed to 88.2 (magisk version, aroma choosable)
- Updated Xposed Installer to 3.4
- Updated adblocker host file
- Updated bootloader/modem to AQK7
- Updated zeroprobes camera mod
- Stock camera does now only feature stock camera mods, for advanced camera mods please use the modded app (which includes almost all modes)
- Fix notification background image not sticking after a reboot
- Fix carrier label on pulldown overlapping with navbar
- Fix lag on pulldown, introduced by force expand notifications. THIS MOD HAS BEEN COMPLETELY KILLED
- Add qs panel number counts to romcontrol
- Removed most google apps from debloater, why: the zip file increases all the time, you can download the apps easily via playstore, also you have them installed as user apps then
- Add modded youtube to play background videos and watch videos without ads
- Add modded GBWhatsApp and GBInstagram thanks to the GB team!
- Moved some more bloatware related to Gear VR into Gear folder
- Added "edge panel" to debloat menu
- Update update-binary
- Updated SMusic app
- Updated Modded Fonts
- Added googles web view by default, so we don't need google chrome
- Busybox installer updated
S7/S7e specific changes:
- Include S7 gamelauncher if no navbar is chosen
- Include S7 UDSS code files if s7 build.prop is chosen
- S7 libs updated to DQK1
- Kernel source DQK1
Useful posts and links
App on PlayStore:
Find my own BatMan app on PlayStore: BM Settings App
Odin:
Find all latest odin and samsung tools on this link: Samsung-Tools
TWRP links:
TWRP S7 Thread
Official TWRP website for s7
Bootloader and Modems:
SM-G930F/FD/K/L/S/W8 BL and CP (all models in one folder!)
SM-G930F/FD BL and CP
SM-G930K BL and CP
SM-G930L BL and CP
SM-G930S BL and CP
SM-G930W8 BL and CP
Magisk related Threads:
Magisk V13.3
Magisk Beta V13.6
Magisk Discussion
How-To create a Magisk module
Phh magiks superuser
Magisk module collection
Root related Threads:
Phh's superuser
Phh's hidesu
Phh's official apk
Phh's material APK
Stable SuperSU releases
Beta SuperSU releases
Chainfires suhide
Kernels Threads:
BatStock-Kernel
TGP Kernel
Notorious Kernel
Pirmal Kernel
Roms made by me:
SuperMan-Rom a customized rom based on official s7 releases
HydraRom which is a full note 7 rom compatible with our s7.
SuperStock-Rom which is as close to stock as possible with some nice additions.
Samsung Links:
Sammobile Website
Latest samsung apks
Samsung Opensource Center
Live samsung updates
Fast firmware downloads
Thread about CSC:
Download latest CSC from CSC Selection V1.1.0
All CSC's ever released
How to donate:
Donate via PayPal.me
Donation via normal PayPal
Questions and Answers
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader, modem and TWRP recovery. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G930F/FD/K/L/S/W8. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 820 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon (like a cloud) appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Q: I installed Viper or other sound mods, but they won't work, why?
A: You most likely missed to freeze sound alive, if you did this and it's still not working you it's due to the kernel. Stock kernel doesn't support these mods since we need a permissive kernel!
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from batman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore BatMan control settings after a clean base update, why?
A: Backup for BatMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in BatMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Encryption does not work anymore on Nougat roms with TWRP installed, sorry to tell...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: There are some test version of Xposed on N, I don't recomend to install it!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent BatStock Kernel
3. Flash Magisk V13.3
4. Open Magiks Manager, go to settings
5. Enable MagiskHide, systemless hosts and systemless busybox
6. Reboot the phone and check safetynet!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: What to do when I can't login to snapchat?
A: Clean install the rom without root and login to your snapchat, save the app with titanium backup, flash back root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Questions about Kernels:
Q: I want to switch kernel, how?
A: We have systemless we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Questions about S8 Ports:
Q: I have the problem that on each game I start, the screen becomes black, why?
A: This happens on all roms if you haven't selected S8 navbar AND updated game tools via samsung store. I will explain: the new s8 has an updated game launcher which works together with the navbar. The rom itself includes an older version of that app to work well if you don't choose the navbar. If you update the game launcher, the store will think you got a s8 (as this is a full s8 port). After that it installs you most recent s8 game tools and you got this issue with black screen! Solution: don't update that game tools!!
Q: I have a GAP on the stock launcher with no s8 navbar, why?
A: Samsung recently started to update all their apps via playstore. So if you update the launcher via play store, the app will be stock from samsung and not modded anymore. Means that GAP will appear again after the update. Solution: simply don't update the app
Q: I have a virtual home button on the AOD and it won't go away!
A: You should be able to update the AOD app via samsung store, that will fix it.
Q: On AOD analog clock I can't see the clock seconds and hours on the first clock, all others are working fine. How to solve?
A: I'm aware of this and will try to fix it on upcoming updates!
Q: How can I get camera stickers to work?
A: By flashing the provided fix from the OP
Q: How can I get secure folder working again?
A: I dropped support for secure folder officially, but there have been some discussion about a fix, check it here
Reserved1
cool! let's try it out......
It's awesome ROM! Even Bluetooth Dual Audio works!
Awesome! Going to check it out now.
Excellent, it's very stable for me, I used it since yesterday.
Congratulations to this Piece of Art!
As soon as i am home will testing it.
Just one question : will this phone recognized as s8 or s7? (build prop, herolte for example)
What about camera?
super_nooby said:
cool! let's try it out......
Click to expand...
Click to collapse
Have fun my friend
kapi9505 said:
It's awesome ROM! Even Bluetooth Dual Audio works!
Click to expand...
Click to collapse
Does it work too on the s7?? I never tested this feature to be honest
Critique said:
Awesome! Going to check it out now.
Click to expand...
Click to collapse
Enjoy it
dylem29 said:
Excellent, it's very stable me, I used it since yesterday.
Click to expand...
Click to collapse
Thank you!
lladwein said:
Congratulations to this Piece of Art!
As soon as i am home will testing it.
Just one question : will this phone recognized as s8 or s7? (build prop, herolte for example)
Click to expand...
Click to collapse
Thanks very much!
It's recognized as s8, as everything on this rom is on s8 (nearly). It's a full port
tomurbanowicz said:
What about camera?
Click to expand...
Click to collapse
Camera is from the s8, but quality the same as on the s7
Tkkg1994 said:
Camera is from the s8, but quality the same as on the s7
Click to expand...
Click to collapse
What is problem with camera? In the bug list is "camera sticker". What does it mean?
Tkkg1994 said:
Does it work too on the s7?? I never tested this feature to be honest
Click to expand...
Click to collapse
Yes it works tested on bt speaker and bt headphones, no problem with connecting both simultaneously, dual audio notification, applied and they played both in the same time
kapi9505 said:
Yes it works tested on bt speaker and bt headphones, no problem with connecting both simultaneously, dual audio notification, applied and they played both in the same time
Click to expand...
Click to collapse
Oh that is awesome!!!!
tomurbanowicz said:
What is problem with camera? In the bug list is "camera sticker". What does it mean?
Click to expand...
Click to collapse
Stickers which are on the s8 (similar to whatsapp) they do not work due to the hardware difference in camera
Cool :laugh: downloading right now. One question: will substratum for s8 also be supported in this rom? If it's not then it's understandable ? (rom already has customizable systemui so it doesnt matter that much)
Hey Tkkg, amazing work on SuperMan!! , but wheres the differece between batman and superman rom now? :/
iOrpheus06 said:
Cool :laugh: downloading right now. One question: will substratum for s8 also be supported in this rom? If it's not then it's understandable (rom already has customizable systemui so it doesnt matter that much)
Click to expand...
Click to collapse
It should work. As substratum works on all android 7.0+ devices. I haven't tested it till now
lmfao009 said:
Hey Tkkg, amazing work on SuperMan!! , but wheres the differece between batman and superman rom now? :/
Click to expand...
Click to collapse
SuperMan: based on s7 firmware
BatMan: based on s8 firmware
There aren't any other differences
Tkkg1994 said:
It should work. As substratum works on all android 7.0+ devices. I haven't tested it till now
SuperMan: based on s7 firmware
BatMan: based on s8 firmware
There aren't any other differences
Click to expand...
Click to collapse
okay thank you
Tkkg1994 said:
It should work. As substratum works on all android 7.0+ devices. I haven't tested it till now
Click to expand...
Click to collapse
ok thanks I'll try once i get my hands on substratum with tw support
Project Pixel P1.0
What is Project Pixel?
Project Pixel is a small team of developers that work on porting most, if not all of the Google Pixel features to stock firmwares.
We mostly specialize in Stock Samsung Firmwares, although we may do work on ports of OneUi once in a while. Our objective is to deliver the best performance by using stock firmware whilst also improving upon it by debloating and tweaking whilst also giving you all the features of a Pixel device.
Pixel Pie 1.0 Feature List:1. AdAway
2. Deep Debloat and DeKnoxed (Apps, permissions, framework, unnecessary features-stripped and removed)
3. Dolby Atmos with Correct Tuning and Gain (Main Speaker has most power and Earpiece just adds detail and treble)
4. Eleven Music (Lineage OS 15.1)
5. Files GO (File Manager)
6. GCam (Note: GCam might not work on all devices, because of hardware compatibility) Version is 6.0
7. Google Calculator
8. Google Calendar
9. Google Chrome
10. Google Clock
11. Google Contacts
12. Google Keep (With Handwriting Libs)
13. Google Lens (Works within Google Photos and Recents in Pixel Launcher)
14. Google Messages
15. GPay (Working Payment Method along with NFC functionality)
16. Google Phone
17. Google Pie Emojis (Not Samsung Ones)
18. Google Play Games
19. Google Tasks
20. GBoard
21. Mtweaks (Has Hardware Control - Similar to Kernel Adiutor but more tailored to Exynos)
22. Pixel Fonts
23. Pixel 3 Boot Animation
24. Pixel 3 Live Wallpapers with Normal Wallpapers
25. Pixel Google Photos (Free Original Quality Storage)
26. Pixel Module V1 - Pixel Animations, framework and configs.
27. Pixel Launcher with new recent menu
28. Pixel Sounds
29. Samsung Digital Wellbeing
30. Samsung App Lock
31. Samsung Gallery (Stripped Down and lightened to improve performance)
32. Samsung's Stock Camera with HDR parameter changes, debloated and additional video modes (4k30 at HDR- Not Fully Tested)
33. SystemUI Tuner (Provides battery stats along with other useful customiztions - Check QS icons and add it to QS Panel to view)
34. VoLTE Supported
35. YouTube Vanced (Ad-free Youtube)
CHANGELOG 1.0:
initial release
Bugs:
None
Notes:
1. To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
2. Make sure you set Google Phone as your default phone app. Go-to Settings/Apps. Click the three dots in the top right corner. Then click default apps. Then Calling App and select Phone.
3. After first boot, reboot your device once to ensure dalvik optimization.
INSTALL INSTRUCTIONS:
- As the ROM zip doesn't contain any kernel, is mandatory to have the linked TWRP installed. (Please flash the correct ones)
- For people coming from other ROM than stock, please do a clean flash
- Copy the ROM zip to your phone
- Boot in TWRP and flash the ROM zip
- After flashing the ROM zip, goto Reboot --> Recovery
- Wait for the boot up (5-7 minutes) and setup your ROM to your liking.
- Don't try to update magisk or you'll get a bootloop. If you just tried and got bootloop, reflash the twrp patched with stable 19.3 magisk (link above)
Download Link and Sources:
Feel free to join us telegram via the group: https://t.me/joinchat/G-BflEMjGlgp1NeWxDA2bA
Correct TWRP: https://drive.google.com/drive/folders/1aj2CN-Hy4S_RQOqiwoG6KWvQJJV3ND70
Download Link 1.0 :https://drive.google.com/open?id=11WOWJj5bmsBxnUKHNHk3f93gB7DqL_ZI
(MEGA MIRROR: https://mega.nz/#!WLpVwAyZ!5RAp9nXXJYUpxU5SnKnthVyEPZw70ur9g6U6eNN1lcA)
Magisk:https://github.com/topjohnwu/Magisk/releases
Kernel Source:http://source.samsung.com/
Credits:
Google for Android and Framework
Samsung For Their Kernel
Screenshots: https://imgur.com/a/s4W2RF2
Any difference in this rom and one im using from other moderator?
pankajgavri said:
Any difference in this rom and one im using from other moderator?
Click to expand...
Click to collapse
This one supports TWRP flashing atleast, so yes it is a good idea to dirty flash to this ROM just because it is a new one and will be the one supported from now on
how to get snapchat working?!?!
Eyy, well done Zer0!
S10 plus supported ?
S10e will be supported?
Everything worked fine but after the reboot I hang in the loading screen also a second reboot with root right does not help ... any ideas?
Waleedaligomaa said:
S10 plus supported ?
Click to expand...
Click to collapse
Check my s10+ thread
demolatorul said:
S10e will be supported?
Click to expand...
Click to collapse
yes if you can test then we can get s10e build out very fast
Sent from my SM-G935F using Tapatalk
works with latest firmware update? G973FXXU3ASG8
because i have bootloop (Google-Boot-Animation)
My Steps:
- Updated firmware to G973FXXU3ASG8
- Installed latest Magisk Manager
- patched AP
- installed (magiskpatched) AP via Odin
- installed TWRP App
- downloaded twrp-3.3.1-3-beyond1lte.img via TWRP
- patched twrp-3.3.1-3-beyond1lte.img via Magisk
- flashed (magiskpatched)TWRP via TWRP
All good ....
then...
- boot into TWRP - wiped System, Data, Dalvik Cache and Cache
- flashed ZIP
- flashed Magiskv19.3
- reboot wait 30 min.
- reboot again
- wait over 45 min.
What did i wrong? :crying::crying::crying::crying:
camera wrong
Gcam and Samsungcam don't work，screen black then phone reboot
Bxactions app not detecting bixby button,
In previous pixel rom i changed this setting
Its located in system/usr/keylayout/generic.kl
When you open generic.kl , scroll down to the code no. 703 and change it from VOICE_ASSIST to WINK
It was working
Yesterday i dirty flash your rom and changed this setting but bxaction app is still not detecting bixby button
Please help
TIA
blackxxx15 said:
works with latest firmware update? G973FXXU3ASG8
because i have bootloop (Google-Boot-Animation)
My Steps:
- Updated firmware to G973FXXU3ASG8
- Installed latest Magisk Manager
- patched AP
- installed (magiskpatched) AP via Odin
- installed TWRP App
- downloaded twrp-3.3.1-3-beyond1lte.img via TWRP
- patched twrp-3.3.1-3-beyond1lte.img via Magisk
- flashed (magiskpatched)TWRP via TWRP
All good ....
then...
- boot into TWRP - wiped System, Data, Dalvik Cache and Cache
- flashed ZIP
- flashed Magiskv19.3
- reboot wait 30 min.
- reboot again
- wait over 45 min.
What did i wrong? :crying::crying::crying::crying:
Click to expand...
Click to collapse
Use Beyond ROMs twrp. Because you updated firmware to ASG8 your using ASG8 kernel. Reading the notes tells you, that only ASF3 is supported, which is why he said to use Beyond ROMs TWRP which is based on ASF3.
Also, don't flash Magisk. It now comes as part of the recovery
ch75494012 said:
Gcam and Samsungcam don't work，screen black then phone reboot
Click to expand...
Click to collapse
I think you have the wrong twrp recovery. Use the latest "asf3 twrp" and S-/G-Cam should work again.
Zer0byZer0 said:
yes if you can test then we can get s10e build out very fast
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Yes, just bought a 10e, if you need test
Dose snnadragon s10 work ?
@Zer0byZer0
Guys what are the bugs on S10e I will try to fix them.
Hello everyone !!!
I want to install this ROM but I did not understand the installation procedure very well. For now, I'm with the original ROM with Magisk and TWRP (patched with Magisk 19.4-73). Could you explain to me in detail the procedure please?
Thank you.
Device: Samsung Galaxy S10 SM-G973F
Hi guys
I just rooted my phone and installed 5Toos rom with viper4android
But I just installed it and even when I enabled it ...it doesn't show processing....
I enabled master limiter but still the processing shows NO ....
Somebody can you give me a tutorial ????
I searched everywhere but still no help !!!!
rohithksaj said:
Hi guys
I just rooted my phone and installed 5Toos rom with viper4android
But I just installed it and even when I enabled it ...it doesn't show processing....
I enabled master limiter but still the processing shows NO ....
Somebody can you give me a tutorial ????
I searched everywhere but still no help !!!!
Click to expand...
Click to collapse
Remove whatever you installed completely. If there's an uninstaller, use that. Install the LegacyFX module through Magisk. Just follow the installer prompts, vol + or vol -, for which options you want. (I chose the older version 2.3.) At the end you can choose to make it a system or user app; I chose system. It works fine.
The device has rooted magisk
my audio experience on 1 + 5t is amazing 1 stereo system on iphone headphones you just need to install the magisk ainur sauron + viper4androi module and fix packages so that it combines together into a perfect effec combination Here you will see the power of the lord when listening to music on spotify
Experience after many trial order installation
1: ainu sauron
2: viper4andoid
3: audio compatibility patch it will create a link
4: audio modification lybrary: the module to work well on the music player is acp.zip you will find it in the link below
5:Add Dts headset port
Just the order above is enough to make you perfect sound
After having all the mods above, you will see viper4andoi change the color of the sign that it is working to enjoy the sound of the lord of the ring.
i can't upload the link you just need to search on google on "Ainur saron"
There are 2 versions for me to choose sauron
download latest 2.7 from xda lab
download and install audio modification library
open viper install driver and reboot
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Greenspoof said:
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Click to expand...
Click to collapse
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Techguy777 said:
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Click to expand...
Click to collapse
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Nemix77 said:
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Click to expand...
Click to collapse
It's switch automatically, just connect your headphone
Greenspoof said:
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
Click to expand...
Click to collapse
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Techguy777 said:
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Click to expand...
Click to collapse
Didn't know that. So do you use v2.3.4 or the new one ?
Greenspoof said:
Didn't know that. So do you use v2.3.4 or the new one ?
Click to expand...
Click to collapse
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And 2.3.4 is really better than nowadays viper? Like did you compare? Thx for your time
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And if so, could you tell me where did you download this version of viper? And how did you installed it ?
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
I installed everything over magisk.
First Ainur Narsil and Audio modification library then reboot. After that viper then open viper and install the driver. The device will reboot. In magisk deactivate both Ainur and AML then open viper again. Driver should reinstall again. After reboot it should work. Could be that you have to enforce in settings. In a link above there is this method mentioned.
Greenspoof said:
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
Click to expand...
Click to collapse
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
It worked thx !!!! How do I choose the driver type? Because I saw there was 3 driver, super quality, high quality and power saving. Or it's already in super quality?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Well statut is abnormal, I will try with James Dps but I'm not a fan of these kind of workaround lol, but the link of Google you gave me is deleted?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Nevermind, I thought I had to install Jamesdsp "verison", like a special Jamesdsp lol, everything work great right now!!! I really thank you for your time, really ! But just one last question subsiste, how I'm sure it's the super quality driver that is installed and not high quality or energy saving?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, No, Yes, No, Yes, Yes, Reset.
3. Install Audio Modification Library (v4.0), reboot.
4. Instalar Viper4Android FX Legacy v4.4 (v2.5.0.4)
5. Options: Vol +, Vol-, Vol-, Vol +, Reset.
6. Install the JamesDSP module.
7. Disable any native system / ROM equalizer.
Install Viper4Android FX app (v2.6.0.6, Jan/2019) via github or backup
Option: find out him here or Magisk folder (use any root explorer for that).
Path: /data/adb/Modules/Viper (old app)
For newest V4A app use search or Rose.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage was formatted.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips and KZ). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip without any conversion files.
The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
NOTE4: Maybe just AML + FX Legacy or 2.7 + JamesDSP is enough. You can remove James app after installed his Module.
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
alefmm said:
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, Up, Yes, Up, Yes, No, Reboot.
3. Install Audio Modification Library (v4.0), reboot.
4. Install Viper4Android FX v2.7.2.1 (driver v2.5.0.4)
NOTE: Viper FX will install the latest app, finish installing Driver v2.5.0.4 on it and running (do some test to confirm).
Afterwards, remove the latest app and install the v2.6.0.6 app.
Install Viper4Android FX app (v2.6.0.6, Jan/2019), required download via github or backup.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage formatting.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip. The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
Click to expand...
Click to collapse
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Greenspoof said:
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Click to expand...
Click to collapse
Does't work and duplicate profiles (older profiles, if you don't migrate will works idem).
As I said, I tested both and the most stable is Driver Version: 2.5.0.4 and Viper4Android FX app v2.6.0.6.
Doing it correct, you can allow quality more than 200% compared without it.