I am new to posting in forums but I'm eager to learn. I have limited experience with ubuntu and linux in general. I am a college student but I have good knowledge of computers and know some language including HTML, Visual basic, SQL, C, etc...
I have a Archos 5 Android 7502 160GB version and I am looking for information on how I would be able to get help developing a ROM update for the Archos. I HAVE DONE MY RESEARCH. I've been looking this up since I got the device in December.
I know many drivers need to be adapted to the ROM for the archos to be able to run it. I wanted to know what Application I should use and if I can only do it using ADB bridge. (I know little about how the bridge works)
I have the Developer Edition Firmware from openAOS installed on the Archos. This installs a bootloader that can be edited with menu.lst on the device default folder. I also have 3 ROMs I can boot to: 1. Android 1.6 (Default OS) 2. Froyo 2.2 (In Development) 3. Angstrom Linux (comes with developer driver)
It is my understanding that the source code is available for the Archos Gen 7 Tablets on the Archos website. (Can't link due to being a new user)
Also gingerbread has its source code released. (Can't find link, yet...)
I was wondering what steps would be involved in adapting the drivers for the ROM for the Archos Gen 7 Tablet?
Also how much time would be needed to finish the project?
jimboobrien said:
I am new to posting in forums but I'm eager to learn. I have limited experience with ubuntu and linux in general. I am a college student but I have good knowledge of computers and know some language including HTML, Visual basic, SQL, C, etc...
I have a Archos 5 Android 7502 160GB version and I am looking for information on how I would be able to get help developing a ROM update for the Archos. I HAVE DONE MY RESEARCH. I've been looking this up since I got the device in December.
I know many drivers need to be adapted to the ROM for the archos to be able to run it. I wanted to know what Application I should use and if I can only do it using ADB bridge. (I know little about how the bridge works)
I have the Developer Edition Firmware from openAOS installed on the Archos. This installs a bootloader that can be edited with menu.lst on the device default folder. I also have 3 ROMs I can boot to: 1. Android 1.6 (Default OS) 2. Froyo 2.2 (In Development) 3. Angstrom Linux (comes with developer driver)
It is my understanding that the source code is available for the Archos Gen 7 Tablets on the Archos website. (Can't link due to being a new user)
Also gingerbread has its source code released. (Can't find link, yet...)
I was wondering what steps would be involved in adapting the drivers for the ROM for the Archos Gen 7 Tablet?
Also how much time would be needed to finish the project?
Click to expand...
Click to collapse
Well I'm only going to tell u this it will be a hastle... and considering the archos 5 being one of the oldest tablets out there and the developers out there still not having froyo completley developed yet... I would guess that the project would be a VERY long project to work on. But I do incurage you to make a rom for the archos 5... Oh one question is it the archos 5 you have or the archos 5 internet tablet...
Hi there all ... as the Title says this thread is all about porting Kali Linux / Kali Net hunter ( esp Nethunter ) ... so , does anyone have any resource / any place to get some info , needed files from there ? ... also people , if you know someone which may be helpful , just let me know and I'll invite them so help us .... First , lets get some info about it :
The Kali Linux NetHunter project is the first Open Source Android penetration testing platform for Nexus devices, created as a joint effort between the Kali community member “BinkyBear” and Offensive Security. NetHunter supports Wireless 802.11 frame injection, one-click MANA Evil Access Point setups, HID keyboard (Teensy like attacks), as well as BadUSB MITM attacks – and is built upon the sturdy shoulders of the Kali Linux distribution and toolsets. Whether you have a Nexus 5, Nexus 7, or Nexus 10, we’ve got you covered. Our freely downloadable images come with easy to follow installation and setup instructions to get you up and running in no time at all.
Click to expand...
Click to collapse
as written here
also there is a guid for porting this to our device ... as said here
We need :
1- a Patched Kernel ( maybe @xluco can help us best because I'm just a noob about kernels )
2- a Device Built rootfs file ( I can but need help I can't do it myself ... anyone intrested in helping ? )
3 - a Tester Team ( I can help )
So All , please help give this device a KAli Linux and a Nethunter to make it uniqe and useful ... Thanks in Advance
With Best Wishes
Hitman1376
Sounds awesome would we be able to dual boot? I will be willing to beta test if we can dual boot. I'm fairly experienced with linux so that should help. Also will the interface be optimized for touch at all? Also any particular reason for Kali over Ubuntu touch?
Sent from my SM-P600 using XDA Free mobile app
salam hamvatan
i bought my p601 more than 1 year ago and my main purpose was installing linux and specific kali linux which could be installed on note 10.1 2012 easily i lost my hope but i can help this project how much i can
Good day -
I am looking for the best open-source method to root my new Android 7.0
AGM A8 (qualcomm 425 snapdragon chipset, 4x AARCH64 cores) when it arrives.
I am a programmer (not a mobile device expert) with latest Android Studio + NDK
installed with Android 24 & 25 platforms for aarch64, on a Linux x86_64 Workstation.
I do not run Windows, though perhaps WINE might be a possibility; I can run Java, of course .
I will not root my device until I can assemble the source code
/ scripts and build an unlocking tool that I can read and understand - I do not want to
put my entire device security in the hands of a closed-source application that I cannot
read or build - especially one that risks bricking the device.
Please, does anyone know of an open-source rooting tool that will work for my device that I can build
and run with Android Studio ( IntellIJ Idea + SDKs + NDK + LLDB ) - on Linux ?
I also have Qt5 Designer & latest Java tools & gcc-6.3 & glibc-2.25 & binutils-2.28 & many frameworks installed .
Any suggestions gratefully received .
I have found : https://github.com/android-rooting-tools/*.git
but it looks like these take some time to learn how to use & are potentially dangerous
and not likely to work for Android 7.0 .
Ideally, I'd like a tool I can read (in C, C++ , Java, or Python or PERL or shell scripts) , build on Android Studio, run under emulator for testing,
and then push to device and run on device . Is there any such out there ? If not, it may be a long road, but I will follow till I get there / find one / write one.
Thanks & Regards,
Jason
Update: The instructions below are for the AGM X1 eu version, for the AGM X1 International version follow this thread, it's a work in progress and not available yet.
As you might be aware the AGM X1 is a fantastic rugged android, aside from the great hardware, the source code of the phone is available to devs. The combination of excellent ruggedness, hardware and open source makes the AGM X1 "the best choice in phones" at the moment for me period.
Unfortunately the information on how to root and install the available Lineage OS port is not very clear
I spent a few hours trying to find the best place to start and it's quite difficult to find
https://w3bsit3-dns.com/forum/index.php?showtopic=814951
This page contains a post below the main top section of the page.
https://w3bsit3-dns.com/forum/index.php?showtopic=814951
Here's the start of the important stuff with some additional information that I added
"The jist of the thread
TWRP 3.1.0 for AGM X1
---------------------
AGM-X1-flash-TWRP-root.zip ( 21,66 ?? )
https://w3bsit3-dns.com/forum/dl/post/10034644/AGM-X1-flash-TWRP-root.zip
OR
Download TWRP + ROOT from Google
https://drive.google.com/open?id=0B871Z4mt2B7Qb0RLMVlSemR4Szg
sha256sum
AGM-X1-flash-TWRP-root.zip b34b19f6666f0456f68e3a452c97aacf2fd3f1b06819ef7a633d95259d22a25f
SR3-SuperSU-v2.79-SR3-20170114223742.zip e147970ca377a184a177092f4c4a8022420cc30785fdaf95e16703da8312426d
Now here comes the difficult part, trying to decipher the following text
Text from thread (bad english)
Installation takes place in a similar way as inthis post, Except that you need to choose the same name! The fifth! The item and the installation of the root rights occurs automatically when you exit TWRP.
Can anyone help me with this, I cannot decipher the above paragraph. Also note that this forum is broken and not working correctly as a site (many issues including: no registration available and also the important link in the paragraph above does not work)https://forum-lw-1.xda-cdn.com/images/smilies/rolleyes.gif
P.s not interested in king root method (too many mentions of malware), will use twrp.
Update: (thanks to Skill3r)
clearer guide - also note that this zip contains twrp 3.0 instead of 3.1 due to backups not working with 3.1 (important)
https://forum.xda-developers.com/an...m-snapdragon-617-4gb-64-t3533020/post71877054
The steps :
First You need to download this package and extract it : http://www53.zippyshare.com/v/3sgYq5cu/file.html
sha256sum
AGM-X1-flash-TWRP - Skill3r MOD.rar a0e755dc513b716e5a5369481f0761a4c6a9ec60401bd9c0c060579da87f3668
Contents with sha256 hash
adb.exe f05ff055b2ce9213d0b349da7ef713664d66a13134be76820cd072cd1e44211a same as twrp 3.1 version
AdbWinApi.dll 14a51482aa003db79a400f4b15c158397fe6d57ee6606b3d633fa431a7bfdf4b same as twrp 3.1 version
AdbWinUsbApi.dll 041c6859bb4fc78d3a903dd901298cd1ecfb75b6be0646b74954cd722280a407 same as twrp 3.1 version
fastboot.exe 632f4f2039b76082f2c090f6aec43893e93e8b32d0aae6b7cfa03f9b71d5d897 same as twrp 3.1 version
One-key-flash-twrp.bat f3e5a611166e970cb41a0040979da305b9d91abc44537cab9af94110381fbf54 different from 3.1 version
recovery_AMG-X1_es_by_MDSdev.img 3eb8df185afaacaae4a754ba3c18e5e86ea140f0b115ab73d28fe2ba64088fae different from 3.1 version
SR3-SuperSU-v2.79-SR3-20170114223742.zip e147970ca377a184a177092f4c4a8022420cc30785fdaf95e16703da8312426d same as twrp 3.1 version
1) Enable the developper settings
Go to Settings>About phone and hit "kernel version" 7 times to unlock
2) Enable the OEM bootloader unlock
Find in settings>dev options
3) Enable the USB debugging
Also in settings>dev options
4) Plug an usb cable and when the windows ask for the RSA identity of the computer, allow it and check to always allow the computer.
5) Shutdown your phone
6) Press VOL down + power and after long press the power button
7) Now in recovery mode, go to reboot to bootloader, a green message is shown with fastboot.
8) Now launch the One-key-flash-twrp.bat in package and plug your phone
9) Press any key and follow the instructions in the script.
10) TWRP should launch, you need to swipe to allow modifications in system
11) Press a key in the script, TWRP should reload, TWRP is now installed in the phone, you need to allow modifications in system again.
12) To root the phone, you just need to exit TWRP, he gonna ask to root the phone, you just need to swipe to root the phone.
Now you have TWRP installed and the phone is rooted.
If something goes wrong and bootloop the phone, please just follow the AGM instructions with the original package and the procedure to reflash the rom (on the external SD card and with VOL UP + VOL Down + Power)
I've made progress, but I'm stuck on finding a suitable driver for the adb interface on windows XP for the AGM X1.
For drivers I've tried
NOT WORKING! Google USB drivers
https://developer.android.com/studio/run/win-usb.html
sha256sum
latest_usb_driver_windows.zip 1ee1d023a99ffac962af4454eb9b9900f6858c687b4d5311e8fb361548d6c078
NOT WORKING!
https://forum.hovatek.com/thread-16965.html
which should bring you here
https://drive.google.com/file/d/0B4S-Z726VJ2SLW9zNXdqWDBQQkE/view
sha256sum
a3312727a77c3ab89e0d7463cd252cffec554a182f78195f6908f62132c5c174
The important file in the zip archive is
SHA-256 08e5e7e5f30801b363f08a6106425faa1c505bd048a18c846a5b3e5959a4998e
Called
Setup.exe
Qualcomm_USB_Driver_V1.0.exe
among others.......
MD5
906c4effd6a20be22ea026a43a3cb7b3
SHA-1
89df6ca0d893d9355741d8ca11cdebea1fbbb095
NOT WORKING!
Univeral drivers
https://github.com/koush/UniversalAdbDriver
https://adb.clockworkmod.com/
sha256sum
UniversalAdbDriverSetup.msi 4e77e303bba6cf84588bdb6da91f7a875d406f7930cbe9f4d2aae0b643c0c928
NOTE: Problem installing: universal adb driver, there was a problem with this windows installer
Does any one have any advise please. Obviously I've checked the Manufacturers site they have not provided a driver. The chipset is Qualcomm MSM8952.
Thanks in advance.
Hello, for the drivers, simply plug the phone on USB and select CD in options (where you can check 'simply reload' mtp etc ...)
On the computer you can install the drivers now
Hi Skill3r,
Recommended (MAYBE THE DRIVERS WORK ON OTHER VERSIONS OF WINDOWS, BUT LINUX IS SO MUCH EASIER/BETTER)
I gave up on Windows XP. Now I'm using Xubuntu 16.04 LTS and EVERYTHING IS CONNECTING TO THE COMPUTER with this guide (without going to qtadb installation)
http://bernaerts.dyndns.org/linux/74-ubuntu/354-ubuntu-xenial-android-adb-fastboot-qtadb
p.s the vendor ID is "Qualcomm, Inc": with the code: 05c6 (it's in that github download in the link above, no need to add it specially just follow the guide)
The phone is recognized no special drivers required IT ALL THERE ALREADY! I took the commands from the bat file, changed (take away .exe e.g fastboot.exe to fastboot)
So the problem I'm getting now just after loading twrp with this command
fastboot boot recovery_AGM-X1_es_by_MD5dev.img
And this problem is............
That the touchscreen is unresponsive and I'm unable to check the box and swipe to allow TWRP to modify the system.
I have the AGM X1 International edition.
For me also:
Wenn I´m in the TWRP menu, i´m nt able to click on a button or swipe the last button, because the Touchscreen doesn´t work.
How can I solve this problem, install twrp and root the phone? because i would install LINAGEOS...or what is the best Rom/Custom Rom for the agm x1?
Please help me.
thanks
Both twrp image files below (twrp 3 and 3.1) have the touchscreen problem
sha256
AGM-X1-TWRP-3.1.0.img 22b7d529511b0b191c09e850c14b0d4ed6e32cdddc6defd688bcd78d40be2528
recovery_AMG-X1_es_by_MDSdev.img 3eb8df185afaacaae4a754ba3c18e5e86ea140f0b115ab73d28fe2ba64088fae
motsch_, what version of AGM X1 do you have, international?
Have you found any references to this problem in the main discussion pages.
We need to look for any references to this problem, or special img's for this version of phone.
Here's the older xda thread on the agm x1
https://forum.xda-developers.com/ge...ualcomm-snapdragon-617-4gb-64-t3533005/page12
Hi,
how can I see which version does i have?
For the moment i havent found any solution for installing twrp.
I have rooted the phone with Kingroot.
Doesnt exist a solution for us?
We can go to "settings" > "about phone" > scroll to bottom and let me know the
hardware version
software version
kernel version
I know mine is X1 international not EU as I just bought it and the EU version is discontinued, it has the following
hardware version: V1.00
software version: L1253.6.03.01.BYD
kernel version: 3.10.73
Also is there any awesome developers out there that would be interested in making a TWRP version - forked from the original TWRP and put on github.
And maybe then make your own port of Lineage, again with all changes to original Lineage forked on github.
Open Source and transparency of course is the reason for this.
Any one else with a AGM X1, please chime in because if we can get just a few dollars together we can get this done very quickly.
I pledge $25 for round one
Here's a reference to the touchscreen issue
https://translate.google.com/transl.../index.php?showtopic=814951&st=460&edit-text=
08/01/17, 18:45
"Am11go,
I downloaded AGM X1 TWRP Supersu from the caps, it helped, booted TWRP, but the screen did not react at all, like all buttons except on / off, it extinguishes the screen and does not include anymore ... Apparently the hands are crooked, although with bv5000 It was. How to determine which TWRP, under which version?"
if you can find a solution, can you let me please know that?
Found on 4PDA :
Demanda Sam, dit - il. TWRP assemblé avec le noyau et DTB de L1253.6.02.01.BYD. Maintenant , l'écran tactile fonctionne très bien.
hxxps://4pda.ru/forum/dl/post/10490628/twrp_3.0_L1253.6.02.01.BYD.zip
hxxps://4pda.ru/forum/dl/post/10490629/twrp_3.1_L1253.6.02.01.BYD.zip
AGM X1
HARDWARE & VERSIONS
International version
screen: Edo rm67191 fhd Amoled non-oleofobic non-sunlight readable
HW: Qualcomm MSM8952 hs8952qc
Hw other: RAM 4 Gb LPDDR3 933 mhz
fingerprint reader – FPC1020
notification led – aw2013
camera – Omnivision OV13850 13MP ??
SW: Android 5.1.1 LMY47V
L1253.6.02.01.BYD
EU version
screen: Samsung s6e3fa3 fhd super amoled oleofobic?? non-sunlight readable??
HW: Qualcomm MSM8952 hs8952qc
SW: Android 5.1.1 LMY47V
L1253.6.02.01.EU
Gold version
screen: like international?
HW: same?
SW: like international?
reference discussions: https://4pda.ru/forum/index.php?showtopic=793964
https://forum.xda-developers.com/ge...gm-x1-qualcomm-snapdragon-617-4gb-64-t3533005
https://www.movilesdualsim.com/foros/agm-x1-sd617.1152/
about screen: https://www.devicespecifications.com/en/editor-review/993738/3
http://gearopen.com/phones/agm-x1-review-rugged-smartphone-not-drown-but-froze-53924/
KERNEL SOURCE
https://github.com/zhaochengw/android_kernel_agm_agma3eu
KERNEL CONFIGS EU vs INTERNATIONAL MAIN DIFFERENCE
EU
CONFIG_TOUCHSCREEN_GT1XX=y
CONFIG_TOUCHSCREEN_GT1X_GESTURE=y
CONFIG_TOUCHSCREEN_GT1X_FH=y
# CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_V20 is not set
INTERNATIONAL
# CONFIG_TOUCHSCREEN_GT1XX is not set
CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_V20=y
CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_I2C_V20=y
CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_RMI_DEV_V20=y
CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_TEST_REPORTING_V20=y
CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_FW_UPDATE_V20=y
# CONFIG_TOUCHSCREEN_SYNAPTICS_GLOVE is not set
I compared the kernel configs from latest international lollipop rom with the one from Flyme OS 5 (compatible with x1 EU). I have not a boot.img from latest EU firmware, but should not matter.
This should explain the black screen when trying to install EU rom on International X1.
I found these options are not enabled in standard kernels, they may be of interest:
CONFIG_MSM_VPU CONFIG_POWER_AVS_MSM CONFIG_USB_MSM_ACA
reference: how extract kernel configs with extract-ikconfig (from kernel_dir/scripts)
https://github.com/MotorolaMobilityLLC/kernel-msm/issues/73
ROMS
EU: stock,lineage 13, flymeOs 5-6 https://4pda.ru/forum/index.php?showtopic=814951
INTERNATIONAL: only stock (latest is L1253.6.03.02.BYD)
lineage 13 (removed) https://4pda.ru/forum/index.php?showtopic=814951&st=300#entry62399105
PORTING ROMS AND KERNELS
From EU to International:
take EU roms and replace boot.img with one from International roms? (kernel and dtb table??)
From other Phones:
- Similar MSM8952 Phones: https://www.gizmotimes.com/lists/phones-qualcomm-snapdragon-617-processor/19660
- Guides: https://forum.xda-developers.com/android/general/how-to-port-roms-easy-100-t2804390
https://forum.xda-developers.com/showthread.php?t=2707438
http://ohheyitslou.blogspot.it/2011/09/ohheyitslou-custom-android-kernel-guide.html
- Interesting Kernels: https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836
On Snapdragon 617 at the moment should be possible Overclock, but I have found no Voltage control patches from other phones kernels.
TWRP
EU: https://4pda.ru/forum/index.php?showtopic=814951
INTERNATIONAL: https://4pda.ru/forum/index.php?showtopic=814951&st=300#entry62309514
TWRP 3.0 for android 5, TWRP 3.1.0 should be for android 6 and it may have problems with restoring
TWRP reference info https://www.movilesdualsim.com/tema/twrp-by-mdsdev-para-el-x1.168070/
Hi liamotoub,
Thanks for the information. So Lineage OS is not available on the international version of the AGM X1 yet. I see.
Also Thank you skill3r for the links, I see they are 404 now unfortunately.
liamotoub, you seem to know what you're doing? would you consider taking on this as a project.
It's certainly worth keeping an eye on 4PDA, pitty I cannot read russian. If any members of 4PDA in the loop regarding the AGM X1 international are reading this please chime in. Thank you all
Hello, unfortunately I'm not a programmer, I just do "trial and error".
404 is a 4pda.ru error for not registered users, follow this guide to register
hxxps://doorsgeek.blogspot.it/2015/08/4pdaru-loginregister-captcha-tutorial.html
To read just use google translate
hxxps://translate.google.com/translate?hl=it&sl=ru&tl=en&u=https%3A%2F%2F4pda.ru%2Fforum%2Findex.php%3Fshowtopic%3D793964%26st%3D1300&sandbox=1
PS. another phone with a lot of ROMs (android 5 6 7) and similar hardware of X1 (msm8952) is ZTE Nubia Z11 mini
hxxps://translate.google.com/translate?hl=it&sl=ru&tl=en&u=https%3A%2F%2F4pda.ru%2Fforum%2Findex.php%3Fshowtopic%3D803370&sandbox=1
and what can i do with the "twrp_3.0_L1253.6.02.01.BYD.img" from the download from 4pda?
I would install twrp on my x1
motsch_ said:
and what can i do with the "twrp_3.0_L1253.6.02.01.BYD.img" from the download from 4pda?
I would install twrp on my x1
Click to expand...
Click to collapse
With TWRP you can flash another image (lineage OS for example, when we find or make a suitable version for the international version AGM X1)
TWRP will also give you the option to get root permissions, so you can use certain apps that require it. It's like the difference between user and administrator account in windows. It's called rooting because Android is based on Linux, the root account is the account with "super user" privileges, your phone will be open to allow more areas of the system to be used/wrote to/read. It allows your phone it's full potential.
With TWRP we can also do backups and restores of the entire existing ROM and phone contents
So TWRP is the first step before we get the ROM (lineage OS) on the phone https://forum-lw-1.xda-cdn.com/images/smilies/cowboy.gif
Another option for rooting is available called King Root however this comes with a lot of MALWARE AND ADWARE and it is advised not to use it. Besides it doesn't have all the flashing, backup and restore tools anyway. It just gets you root.
That is why we really need to find a working copy of TWRP for the AGM X1
INSTRUCTION TO COMPILE KERNEL (with android ndk on linux 64bit)
git clone hxxps://github.com/zhaochengw/android_kernel_agm_agma3eu
cd android_kernel_agm_agma3eu
export ARCH=arm64
export SUBARCH=arm64
export CROSS_COMPILE=/opt/android-ndk/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86_64/bin/aarch64-linux-android-
[adapt commandline to your installation or use the one in the kernel sources (toolchains/aarch64-linux-android-4.9/bin)]
make xconfig
[load your agm X1 config file, EU version is in arch/arm64/configs/agma3eu_defconfig,and make your changes]
make -jX
[where X is number of your cpu cores]
bootimg/dtbTool -o dt.img -s 2048 -p ./scripts/dtc/ ./arch/arm/boot/dts
bootimg/mkbootimg --ramdisk bootimg/ramdisk_agma3eu.img --ramdisk_offset 0x01000000 --base 0x80000000 --tags_offset 0x00000100 --pagesize 2048 --kernel arch/arm64/boot/Image.gz --cmdline "console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk" --dt dt.img --output boot.img
Image.gz ramdisk_agma3eu.img dt.img will be incapsulated in boot.img.
Test if kernel works:
#adb push boot.img boot
If not boot restore previous boot image.
notes:
1.if you load the international kernel config, and you got some errors related to VENDOR, enable
CONFIG_MACH_HIS_SMARTPHONE CONFIG_HIS_BOOT_INFO
and fill CONFIG_HIS_VENDOR_NAME: Android CONFIG_HIS_PRODUCT_NAME:agma3eu
2.if you got an error related to msm_dba_internal.h not found, edit
drivers/video/msm/msm_dba/msm_dba.c and replace #include <msm_dba_internal.h> with #include "msm_dba_internal.h"
PS. replacing my boot.img is not sufficient to make Lineage 13 and FlymeOS5 work, they go in bootloop.
I've uploaded the TWRP versions for the AGM X1 "International version" from the 4PDA links above, to save somebody the trouble of signing up. Version 3.1 is what you want I think (but maybe the backups/restores don't work on v3.1 as skill3r has pointed out or maybe the international version is different?)
SHA-256
72422060a34a995a6f29da1c0a6d5737f7df3ad426d0a7105267730f22e74b9c
File name twrp_3.0_L1253.6.02.01.BYD.zip
Download: https://mega.nz/#!0yZCyIaA!lUnmyeQNinQlzIcwfWZ8F5l6Pz2jlumxzhVx57U6G-M
SHA-256
96c92a52805c0db4fc84c652199887e93a30dae3fe3ead36e14715f7fc736d22
File name twrp_3.1_L1253.6.02.01.BYD.zip
Download: https://mega.nz/#!FmxmFKgK!cCfNsGj3gRMVkl_EI6ROI2-5RbFQsuyElFxRIvN76ug
Also, liamotoub, send me your PayPal address and I'll send a few dollars your way, that information is great thus far
These 2 files should be TWRP 3.0.3 and 3.1.0 right?
I want to point out that also the latest 3.1.1 ( relased for the gold X1 by a Spanish forum, movilesdualsim) works on international X1 mega:#!vB9g3Aab!_gyrr6rP_rJDheGgIseI2u2TglNw1vmv7dDjUnDYJb4 with not encrypted phone.
To try it without touching the recovery partition use:
#adb reboot bootloader
#fastboot boot recovery_name.img
EDIT: it give some problems when flashing new INTernational ROMs, because they think the phone is GOLD and refuse to install due to their updater-script; should be sufficient to modify the build.prop of this recovery or a similar file, with international version "signature".
TWRP 3.0.3 3.1.1, those that I tried, fail to recognize encrypted fylesistems, so backups of this kind will not work.
Another minor bug is the wrong date (1970) in automatic naming of backups folder, but that's common on most phones.
I managed to make FlymeOs 5.1 boot on international X1, but I don't recomend it, it's full of bloatwares and wifi and other things looks to be not working
https://mega.nz/#!djJ3jbbT!Kr6qMyTcggsrYyPeDnySHpp7EOgUZnG-tvTqewdqkmk
Make full working nandroid backup before trying it.
To port lineage 13 I think marshmallow kernel sources are needed, with present sources only lollipop roms could be ported AFAIK, like CM 12.1.
Question to X1 users: on stock rooted rom, do root requesting apps (afwall, kernel audiutor etc) start at boot time? On mine no, I have to start them manually.
On stock rom beware of these preinstalled apps, may be adware:
com.gangyun.beautysnap
com.oupeng.max.hisense
Is there any specific advantage using the TWRP movilesdualsim 3.1.1 version rather than the 4PDA versions other than a slightly higher version.
If I encrypt my phone would there be any other issues other than not being able to do twrp backups and restores? It would still work?
My plan is to flash a GSI image (LineageOS) for android 9. Specifically the following
- https://github.com/LineageOS/android/tree/lineage-16.0
- https://github.com/AndyCGYan/lineage_build_unified/tree/lineage-16.0
Is there a chance of getting this to run on my device? Please see the attached file for the output of the Treble Info app.
I cannot find any information about the impact of VNDK version 27.0 so any help is much appreciated.
Device info:
- Processor: Rockchip 3399
jossdb said:
My plan is to flash a GSI image (LineageOS) for android 9. Specifically the following
- https://github.com/LineageOS/android/tree/lineage-16.0
- https://github.com/AndyCGYan/lineage_build_unified/tree/lineage-16.0
Is there a chance of getting this to run on my device? Please see the attached file for the output of the Treble Info app.
I cannot find any information about the impact of VNDK version 27.0 so any help is much appreciated.
Device info:
- Processor: Rockchip 3399
Click to expand...
Click to collapse
I have the same issue, only thing I could find out, some features not gonna work, (who know what), if you install a newer vndk you wont be able to return to an older one. Be honest, Project Treble is made for seamlessly update phones, but it is a mess, versions, vndks, legacy phones, A-B-A/B images, etc. it doesnt do what it meant to do.
The XDA forum was a good place to ask questions like this, it was, still remember to get answer about my 10 years old phone, however things really changed over the years. Members change their phones on montly basis, so dont expect any professional answer.
Hi, you ma find usefull information in:
Frequently Asked Questions (FAQ)
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com