Moto M XT1663
The phone rom was full updated . I wanted to flash with Old Stock firmware . However when i am trying to flash the stock firm using SP flash tool i am getting an error of
ERROR : STATUS_SEC_INSUFFICIENT BUFFER (OXC002004B)
verified boot is enabled please download signed image (md1img-verified.img) or disable verified boot
Now my phone is not turning on , however i am able to get it detected through SP Flash tool but when i flash it again it shows same error.
The ROM i m trying to install is
Motorola_Moto_M_Dual_XT1663_MT6755_Kungfu_m_6.0_USR_S132_170113_6.0
Please assist.
I tried to use old version of sp tool and now i m getting error
BROM ERROR : STATUS_SEC_IMGHDR_TYPE_MISMATCH (0XC0020029)
please help
verified boot is enabled please download signed image (md1img-verified.img) or disable verified boot
This problem is due to the non-compliance of the Flash tools software version with the phone.
Download the file by below link and use the Sp-flash tools in the folder <XT1663-Moto-M_Flash_Tool_Windows_v5.1616.00-sign> to flash using the ..\SW\target_bin folder, the problem will be solved.
for link contact me
if have any problem contact me by :[email protected]
Tanks.
earthworm82 said:
The ROM i m trying to install is
Motorola_Moto_M_Dual_XT1663_MT6755_Kungfu_m_6.0_USR_S132_170113_6.0
Click to expand...
Click to collapse
how did the flashing go ?,
does the android version also changes ?,
if it does, does it changes to 6 from 7 ?.
currently on the latest
having battery issue
always stays below 2%
hoping to resolve tht
thnk you
bro
also do you know any custom rom for the same device
Related
Recently, I tried to install a custom ROM of Android L (beta), which bricked my device (Canvas A1).
My device Neither boots nor able to go to recovery mode or fastboot.
Pressing power button or Power+Volume Up isn't booting anything.
My bootloader is actually unlocked.
So I tried to flash stock ROM using SP Flashing Tool and it downloaded successsfully.
But still not booting.
Is there any other way to unbrick it rather than going to Micromax Service Center??
Thanks in Advance
Problem solved!
Actually, I had used an old version of SP Tools which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
First, Install VCOM drivers for MTK devices..
Then install Android CDC Gadget Drivers.
Download the KitKat stock ROM.. (See instructions there)
Use SP Flash Tools v5.1424 from there to download it.
Use both 'download' and 'firmware upgrade' modes to flash.
Other issues after flashing:
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted KitKait using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
btw micromax service center isnt asking a word even if you have a custom rom..actually may be they are so dumb that they cant find it if its unlocked or not
GokulNC said:
Recently, I tried to install a custom ROM of Android L (beta), which bricked my device (Canvas A1).
My device Neither boots nor able to go to recovery mode or fastboot.
Pressing power button or Power+Volume Up isn't booting anything.
My bootloader is actually unlocked.
So I tried to flash stock ROM using SP Flashing Tool and it downloaded successsfully.
But still not booting.
Is there any other way to unbrick it rather than going to Micromax Service Center??
Thanks in Advance
Click to expand...
Click to collapse
just flash the stock backup via SP flash tool
Same problem did u find any solution for it yet ?
Press power button and and the volume button up at the same time and restore everything that how you can fix it or use a computer to fix it
Bro i can't get in recovery my phone is dead after downloading the stock rom using sp flash tool
When trying to get firmwhere upgrade it shows failed to get pmt info
Other two methods works download and format+ download only works properly without any error but still it's not booting up
aayan007 said:
Bro i can't get in recovery my phone is dead after downloading the stock rom using sp flash tool
When trying to get firmwhere upgrade it shows failed to get pmt info
Other two methods works download and format+ download only works properly without any error but still it's not booting up
Click to expand...
Click to collapse
Download the KitKat stock ROM..
Flash using latest SP Flash Tools v5.1548 (This is the latest version & highly recommended)
Use both 'download' and 'firmware upgrade' modes
GokulNC said:
Download the KitKat stock ROM..
Flash using latest SP Flash Tools v5.1548
Use both 'download' and 'firmware upgrade' modes
Click to expand...
Click to collapse
I did it after download hit firmware upgrade it shows failed to get pmt info ????
aayan007 said:
I did it after download hit firmware upgrade it shows failed to get pmt info
Click to expand...
Click to collapse
This might help: http://forum.xda-developers.com/showpost.php?p=45780613&postcount=2
Thnx bro that may help me but i don't how to connect my phone on Meta mode to pc yet
unable to switch on mobile
I tried the mentioned methods but still not able to switch on my mobile I am able to flash format or format+download but not firmware upgrade. I am not able to switch on my mobile or recovery. plz help
can you tell us how to get into META MODE....??
GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
i also have same problem. still facing the same problem after followng your instruction. help me please
---------- Post added at 07:55 AM ---------- Previous post was at 07:55 AM ----------
harkirat singhh said:
can you tell us how to get into META MODE....??
Click to expand...
Click to collapse
power botton+vol up
---------- Post added at 07:56 AM ---------- Previous post was at 07:55 AM ----------
nilesh15 said:
I tried the mentioned methods but still not able to switch on my mobile I am able to flash format or format+download but not firmware upgrade. I am not able to switch on my mobile or recovery. plz help
Click to expand...
Click to collapse
same problem im also facing, if you get solution please let me know,
Hi guys... I know this isn't correct place, but I have a bricked Canvas A1... It neither starts, nor goes to fastboot mode... Only random offline battery charging screen shows up... So I wanted to try the SP Flash Tools method.. But I can't find it... If anyone can guide me, thanks in advance!
I'm looking for Stock LP ROM of A1 flashable by SP Flash Tools
DarkSJ1998 said:
Hi guys... I know this isn't correct place, but I have a bricked Canvas A1... It neither starts, nor goes to fastboot mode... Only random offline battery charging screen shows up... So I wanted to try the SP Flash Tools method.. But I can't find it... If anyone can guide me, thanks in advance!
I'm looking for Stock LP ROM of A1 flashable by SP Flash Tools
Click to expand...
Click to collapse
Check this:
http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150
All links and procedure is given there
GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
Will this work when i can't mount/cache
I am having the same issue formated it first with download only option then it stuck on micromax logo so I flashed it again with format all+ download and from then its not starting up. pls help
hi i am also having same problem can guys please help me
Didnt Helped me...
ive bricked my phone via flashtool while i was flashing a rom but it didnt flashed via download method, so i tried format + download and that formatted my device but didnt downloaded the rom...
now it just shows installing driver while i connect to pc and is detectable by flashtool but the device shows nothing...
everytime i try flashing a new rom via flashtool it shows illegal as the roms were third party...
please suggest me a rom that is stock and that not show illegal while flashing...
Thanks in Advance...
hey guys, i found 3-4 firmware on shreps or scritch Server they shared, but i am confused about selecting correct firmware for my device, as i have K5 Plus with following specs ( MSM8916 Snapdragon 615 as per CPU-Z and Snapdragon 616 as per gsmarena and lenovo said.) with 3GB of RAM i am on A6020a46_S051_160805_ROW STOCK and i show new update A6020a46_S051_160805_ROW_TO_A6020a46_S056_161019_16G_ROW. (59 MB in size) i downloaded update but i am on twrp recovery so i flash stock recovery using fastboot and then try to UPDATE my devie but it failed to download new system just updating system and then rebooted to normal and after that got ERROR update failed? any one faced same issue if yes and if you solved please guide a little. or tell me the correct firmware for our devie so i can restore to full stock firmware again using QPST.
Thanks
Hardik.
BHARDIK said:
hey guys, i found 3-4 firmware on shreps or scritch Server they shared, but i am confused about selecting correct firmware for my device, as i have K5 Plus with following specs ( MSM8916 Snapdragon 615 as per CPU-Z and Snapdragon 616 as per gsmarena and lenovo said.) with 3GB of RAM i am on A6020a46_S051_160805_ROW STOCK and i show new update A6020a46_S051_160805_ROW_TO_A6020a46_S056_161019_16G_ROW. (59 MB in size) i downloaded update but i am on twrp recovery so i flash stock recovery using fastboot and then try to UPDATE my devie but it failed to download new system just updating system and then rebooted to normal and after that got ERROR update failed? any one faced same issue if yes and if you solved please guide a little. or tell me the correct firmware for our devie so i can restore to full stock firmware again using QPST.
Thanks
Hardik.
Click to expand...
Click to collapse
Download s042 ....the fourth zip file in shreps page and if u want to update it to s051, you have to flash India ota zip before you download and install the update
Harry8242 said:
Download s042 ....the fourth zip file in shreps page and if u want to update it to s051, you have to flash India ota zip before you download and install the update
Click to expand...
Click to collapse
i downloaded that file too and tried flashing through qpst tool provided with that file but at last step i got download failed error i meant when i put device with pc while pressing both volume up + down button device detected and i press download button and after some seconds it show error message download failed.
i searched some methods to flash stock rom tried all, even tried lenovo assistant and download user firmware S045 fro. there but after extract and download it through qpst and through lenovo assistant both give failed error!
then now i post this threads.
i need stock recovery which come with S051 sotck if anyone have it please upload it.
thanks for reply
Regard,
Hardik
BHARDIK said:
i downloaded that file too and tried flashing through qpst tool provided with that file but at last step i got download failed error i meant when i put device with pc while pressing both volume up + down button device detected and i press download button and after some seconds it show error message download failed.
i searched some methods to flash stock rom tried all, even tried lenovo assistant and download user firmware S045 fro. there but after extract and download it through qpst and through lenovo assistant both give failed error!
then now i post this threads.
i need stock recovery which come with S051 sotck if anyone have it please upload it.
thanks for reply
Regard,
Hardik
Click to expand...
Click to collapse
Oh sorry i forgot ..... the qpst tool included in our stock rom is the newest version ........it does not work with our device....download the older version from the link below and let me know if it works .
https://docs.google.com/uc?id=0B_MAL3K1CFyUWUZNTTBVcmtzNGs&export=download
Harry8242 said:
Oh sorry i forgot ..... the qpst tool included in our stock rom is the newest version ........it does not work with our device....download the older version from the link below and let me know if it works .
https://docs.google.com/uc?id=0B_MAL3K1CFyUWUZNTTBVcmtzNGs&export=download
Click to expand...
Click to collapse
okay let me try with this and will tell you letter for sure
ryt now downloading cm14. 1, i want to give it a try
stock download done with older QPST 2.7.400 thanks for sharing
BHARDIK said:
okay let me try with this and will tell you letter for sure
ryt now downloading cm14. 1, i want to give it a try
stock download done with older QPST 2.7.400 thanks for sharing
Click to expand...
Click to collapse
And btw when did you get the s056 update because when i checked 10 days back,
it was still in s051.
Harry8242 said:
And btw when did you get the s056 update because when i checked 10 days back,
it was still in s051.
Click to expand...
Click to collapse
i am already on latest update S056_161019_ROW(5.1.1)
i got it exact date when i create this thread.
Regard,
Hardik
the latest version is this s105 for 46 3gb one with volte modem....
Hi there !
i'm new here at xda forums, i have a serious problem
i have flashed TimEm Rom v2 in my galaxy j200f (J2 2015)
it didn't work so i tried to flash lineage v14 nougat and also didn't work :crying:
when i wanted to reflash the original firmware by samsung from sammobile it shows me some kind of bulls**t
when i flashed the firmware with odin and i rebooted my device it shows me erasing with the android logo and dosent boot, i think its some kind of virus cuz twrp shows me that no OS is installed (i can access download mode and recovery) i dont know what to do i tried to flash the original firmware 100 times
Please Help !
Hey (newbie here also.) I suggest you need to flash your original firmware via download mode.
Hello ,i have a problem whit my a5 2017
I have updated my phone to latest version of oreo , before doing this i disabled oem unlock but i got twpr installed in my phone .
Now after the oreo update the phone is a brick , i have no command screen and if i try to enter recovery i have this message :
#fail to open recovery_(cause no such file or directory)#
Now i am on the latest version of bootloader , oem locked and frp lock active whit an infinite bootlop.
I tried to extract recovery file of latest oreo update whit cmd l4z command , success , i flashed it but still no recovery
If i try to flash twpr i get an error : custom binary locked by frp lock on download mode screen
Adb does not recognize my phone i can't unlock oem from adb
I tried to install stock firmwares a lot of times but the problem still persist
What can i do?
gd9719 said:
Hello ,i have a problem whit my a5 2017
I have updated my phone to latest version of oreo , before doing this i disabled oem unlock but i got twpr installed in my phone .
Now after the oreo update the phone is a brick , i have no command screen and if i try to enter recovery i have this message :
#fail to open recovery_(cause no such file or directory)#
Now i am on the latest version of bootloader , oem locked and frp lock active whit an infinite bootlop.
I tried to extract recovery file of latest oreo update whit cmd l4z command , success , i flashed it but still no recovery
If i try to flash twpr i get an error : custom binary locked by frp lock on download mode screen
Adb does not recognize my phone i can't unlock oem from adb
I tried to install stock firmwares a lot of times but the problem still persist
What can i do?
Click to expand...
Click to collapse
I suggest try to download another stock rom and try again with it.
matkali said:
I suggest try to download another stock rom and try again with it.
Click to expand...
Click to collapse
i have done this 13 times and the problem still.
gd9719 said:
i have done this 13 times and the problem still.
Click to expand...
Click to collapse
Download from here:
https://www.sammobile.com/samsung/galaxy-a5-2017/firmware/#SM-A520F
matkali said:
I suggest try to download another stock rom and try again with it.
Click to expand...
Click to collapse
I finally booted up my phone and unlocked oem
but network is not working , everytime i update my firmware recovery is missing and i have to install recovery manually (only twpr work , stock recovery not working cause of bootloader)
i have tried to unpack recovery from lz4 stoc files ( latest update) create a tar whit 7 zip and flash it , flash success but still no recovery.
after erasing screen after update i have no command whit failed to load recovery no such file or directory
Recently I broke my smartphone and now it is in a bootloop and I can't install the official rom to it. Ofp file is a piece of **** because nothing can flash it even Realme flash tool says central directory not found. I am lost. If anybody can give me it's rom extracted from it's phone i will thank you.
Have you tried using SP flash tool ?, what region is your phone ?
Yes I am trying but you know thanks to the mtk secure stuff it is almost impossible to get the phone in brom mode.
Use mtk client to temporarily bypass security and flash using sp flash tool, when using sp flash tool always use DOWNLOAD ONLY otherwise your phone will stop booting