Develop Bugs

[Recovery][SM-E500H/M][QCOM][5.1.1] TWRP For Galaxy E5

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Warning
This recovery will TRIP your Knox Counter and your warranty will be void.
This recovery is only for Samsung Galaxy E500H Qualcomm Snapdragon variant running 5.1.1 (lollipop).
Tested Safely on following devices.
Samsung Galaxy E500H
Samsung Galaxy E500M
Why TWRP ? Why not some rooted firmware which keeps warranty safe ?
TWRP is a custom recovery. It has many more functionality than stock recovery! if something goes wrong while flashing something you can always make a backup use this recovery which can be restored when things get messed. if mess is of large extend you can always flash stock firmware.
Instructions
Follow the instructions carefully.
Step 1 :
Install Samsung Drivers and connect your device to PC. let it install drivers and if its updating let it update. your device drivers should be perfectly installed without a single failure.
Link to Samsung Drivers
Step 2 :
Download Odin 3 you can use 3.07 or 3.09
You can download Odin from here
Download the TWRP Recovery
Step 3:
Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy E5 Logo
Press vol up to confirm
Step 4:
Now that you are in Odin Mode connect your device via USB cable.
Now open Odin3 3.09 or 3.07 that you have downloaded.
If there is a pop-up like Installing ADB drivers let it get finished it usually updates.
Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
Now select AP and browse to where you have .tar file and select it
Make Sure only Default Auto Reboot and F. Reset Time is ticked and nothing.verify twice only these 2 are ticked.
Untick Auto Reboot if you are installing recovery for first time!
Click Start and wait for the process to end. DO NOT Interrupt during this time.
Once it says PASS. BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON.
Done.
Credits:
TWRP Team for their awesome recovery.
Dario (For testing it on Samsung Galaxy E500M)
@kevinkoge

Downloads
TWRP Build 1
TWRP Build 2
TWRP 3.0.2.0 (Build 3)
Sources
Kernel Source

Changelog
May 24, 2016
Fixed MTP Media Transfer
Updated TWRP to latest 3.0.2.0
Added EFS Backup Option
Fixed TimeSetup
04/02
Fixed Brightness Issue
Merged with latest TWRP Changes (Lollipop)
Removed TWRP Inbuilt SU Installation Support (Wont work anymore)
Added TWRP Theme Support
10/11
Fixed Data Partition mount
Fixed SD Card detection
Fixed MTP
Fixed mounts

thanks buddy for this awesome work

Thank you! Looking forward to custom recovery for E7000 and lollipop cm12.1 for E7!

hi guys,
has anyone successfully rooted 5.1.1 with this method?
I'm using e500h, followed all the steps and stucked at Samsung logo after installing supersu.zip.
what I did...
1. Upgraded to 5.1.1 via odin using India firmware.
2. Flashed twrp, no problem found.
3. Flashed the latest stable supersu, stucked at Samsung logo.
4. Flashed the lastest beta supersu, same problem.
Even if I installed supersu via Play, it said the phone must be rooted manually first.
Now I'm back to kitkat
Any idea guys?

t88 said:
hi guys,
has anyone successfully rooted 5.1.1 with this method?
I'm using e500h, followed all the steps and stucked at Samsung logo after installing supersu.zip.
what I did...
1. Upgraded to 5.1.1 via odin using India firmware.
2. Flashed twrp, no problem found.
3. Flashed the latest stable supersu, stucked at Samsung logo.
4. Flashed the lastest beta supersu, same problem.
Even if I installed supersu via Play, it said the phone must be rooted manually first.
Now I'm back to kitkat
Any idea guys?
Click to expand...
Click to collapse
I have same problem, I tried with india, Russia. Recovery works with supersu less than 2,46 phone turn on but din´t root.
If anyone can root please let us know.
Thanks!
---------- Post added at 10:10 PM ---------- Previous post was at 09:59 PM ----------
sorry I forget to say, I tried several time back to kitkat and I can´t stock in bootloader is the closer that I have to use my phone in kitkat
pd: sorry for my english

how ?
t88 said:
hi guys,
has anyone successfully rooted 5.1.1 with this method?
I'm using e500h, followed all the steps and stucked at Samsung logo after installing supersu.zip.
what I did...
1. Upgraded to 5.1.1 via odin using India firmware.
2. Flashed twrp, no problem found.
3. Flashed the latest stable supersu, stucked at Samsung logo.
4. Flashed the lastest beta supersu, same problem.
Even if I installed supersu via Play, it said the phone must be rooted manually first.
Now I'm back to kitkat
Any idea guys?
Click to expand...
Click to collapse
bro . Can you tell me the procedure on how you went back to kitkat ? . When I flash kitkat I get stuck on Samsung logo .. . Can't go to recovery

donaldistoopro said:
bro . Can you tell me the procedure on how you went back to kitkat ? . When I flash kitkat I get stuck on Samsung logo .. . Can't go to recovery
Click to expand...
Click to collapse
I too had that problem. I flashed 5.x and 4.4.2 back and forth few times, wiped/formated everything and factory reset (while you have 5.x and TWRP) including hard reset. For some reason, it went ok and I'm able to use Kitkat again.
I think it may not be the proper way to do it. I just tried every possible thing that I can think of.
I also tried Kingroot, not working. Bummer!

Someone please email chainfire the boot.img or kernel.img he may listen to us and update cf-auto-root ?

notredame said:
I have same problem, I tried with india, Russia. Recovery works with supersu less than 2,46 phone turn on but din´t root.
If anyone can root please let us know.
Thanks!
---------- Post added at 10:10 PM ---------- Previous post was at 09:59 PM ----------
sorry I forget to say, I tried several time back to kitkat and I can´t stock in bootloader is the closer that I have to use my phone in kitkat
pd: sorry for my english
Click to expand...
Click to collapse
donaldistoopro said:
bro . Can you tell me the procedure on how you went back to kitkat ? . When I flash kitkat I get stuck on Samsung logo .. . Can't go to recovery
Click to expand...
Click to collapse
t88 said:
I too had that problem. I flashed 5.x and 4.4.2 back and forth few times, wiped/formated everything and factory reset (while you have 5.x and TWRP) including hard reset. For some reason, it went ok and I'm able to use Kitkat again.
I think it may not be the proper way to do it. I just tried every possible thing that I can think of.
I also tried Kingroot, not working. Bummer!
Click to expand...
Click to collapse
harshal10398 said:
Someone please email chainfire the boot.img or kernel.img he may listen to us and update cf-auto-root ��
Click to expand...
Click to collapse
Its not recovery fault its SAMSUNG. normal root flash will not work on stock anyhow and even chainfire knows it. this is the same issue were S6 Edge suffered too. its security which checks any modification in system partition on boot and if found it wont allow system to boot thus causing bootloop and at no way recovery is at fault!

New build is UP!
KINDLY DO NOT FLASH SUPERSU IT WILL BOOTLOOP DEVICE!

More info please.
Sent from my SM-E500H using Tapatalk 2

t88 said:
More info please.
Sent from my SM-E500H using Tapatalk 2
Click to expand...
Click to collapse
what more info you want ?

do i need to be rooted in order to install cyanogenmod rom and TWRP custom recovery ?

Good morning sir jackeagle .can I still root my phone now that I'm on lollipop 5.1.1?

The link is not working it is just showing the home page?

donaldistoopro said:
Good morning sir jackeagle .can I still root my phone now that I'm on lollipop 5.1.1?
Click to expand...
Click to collapse
Hi,
I dont think so SuperSU will work on 5.1.1 but many have said that Kingroot works so you can try that but CM is pre-rooted so anyway its possible
WeZLi1 said:
The link is not working it is just showing the home page?
Click to expand...
Click to collapse
Download links Fixed!

jackeagle said:
Hi,
I dont think so SuperSU will work on 5.1.1 but many have said that Kingroot works so you can try that but CM is pre-rooted so anyway its possible
Download links Fixed!
Click to expand...
Click to collapse
thanks bro

t88 said:
hi guys,
has anyone successfully rooted 5.1.1 with this method?
I'm using e500h, followed all the steps and stucked at Samsung logo after installing supersu.zip.
what I did...
1. Upgraded to 5.1.1 via odin using India firmware.
2. Flashed twrp, no problem found.
3. Flashed the latest stable supersu, stucked at Samsung logo.
4. Flashed the lastest beta supersu, same problem.
Even if I installed supersu via Play, it said the phone must be rooted manually first.
Now I'm back to kitkat
Any idea guys?
Click to expand...
Click to collapse
You need a custom kernel + beta su 2.51 in order to get root access on tw 5.1.1 roms

Any root for a3 (2017) on Nougat?

Is already possible to root the Galaxy a3 (2017) on Nougat and so yes can sombody give a link?

Sure, search in the forum there is a thread but remember to use supersu 2.82

I also have root, I have installed Magisk.

notthesun said:
Sure, search in the forum there is a thread but remember to use supersu 2.82
Click to expand...
Click to collapse
you mean this threat?

tonime said:
I also have root, I have installed Magisk.
Click to expand...
Click to collapse
you did it from this threat?

khanvict90 said:
you did it from this threat?
Click to expand...
Click to collapse
Yes, Root here:
https://forum.xda-developers.com/sa...root-sm-a320f-fl-y-samsung-galaxy-a3-t3556026
Magisk here:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

tonime said:
Yes, Root here:
https://forum.xda-developers.com/sa...root-sm-a320f-fl-y-samsung-galaxy-a3-t3556026
Magisk here:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
How to install Magisk ???
If one of it's installation steps is to be fully unrooted first and the boot image should be stock.
I already rooted and modified the boot image as for this device we need to flash a file to the boot.img to stop the device from encrypting the internal storage to be able to mount it.
Please Help ...

tonime said:
Yes, Root here:
https://forum.xda-developers.com/sa...root-sm-a320f-fl-y-samsung-galaxy-a3-t3556026
Magisk here:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Thanks mate! But little quistion this is root for nougat right and do i need to unlock my boot loader or can i start right away because i did buy it yesterday so its fully stock and it is A320 FL im from the netherlands

khanvict90 said:
Thanks mate! But little quistion this is root for nougat right and do i need to unlock my boot loader or can i start right away because i did buy it yesterday so its fully stock and it is A320 FL im from the netherlands
Click to expand...
Click to collapse
By Odin flash TWRP, copy the Magisk file to the memory of the phone or to the SD card and Magisk flash by TPWR recovery.
When you restart, install the Magisk manager apk and that's it.

tonime said:
By Odin flash TWRP, copy the Magisk file to the memory of the phone or to the SD card and Magisk flash by TPWR recovery.
When you restart, install the Magisk manager apk and that's it.
Click to expand...
Click to collapse
Wow thats easy man thanks hehe and btw when i did install nougat on my phone i only flashed the ap is that a problem or should i flash al the other files like bl cp and csc togther? I was scared because i have a320FL and not a320F

tonime said:
By Odin flash TWRP, copy the Magisk file to the memory of the phone or to the SD card and Magisk flash by TPWR recovery.
When you restart, install the Magisk manager apk and that's it.
Click to expand...
Click to collapse
Edited: i found it i put it in sd card now its working i have root!!

Root 100% Working!
Root is working 100% for A3 (2017) Android 6.0.1 and even for 7.0!
Links are given in the Galaxy A series 2017 forum

After Flashing Twrp On Nougat
Some balck Screen Shows To Reset My Phone
Sorry Not Good In English

hi after flashing nougat on the a3 2017 i got in the settings menu two battery tabs other than the device maintenance, it's a bug or i flashed it in wrong way ?

edwardola said:
hi after flashing nougat on the a3 2017 i got in the settings menu two battery tabs other than the device maintenance, it's a bug or i flashed it in wrong way ?
Click to expand...
Click to collapse
This is normal and it happened because you flashed the AP file only
If you want to get rid of these Russian providers menus and have stock settings menu you need to flash the full rom files (BL+AP+CP+CSC) via Odin.

AK2H said:
This is normal and it happened because you flashed the AP file only
If you want to get rid of these Russian providers menus and have stock settings menu you need to flash the full rom files (BL+AP+CP+CSC) via Odin.
Click to expand...
Click to collapse
if i flash everything i get a fail but if i only flash ap it passes?

khanvict90 said:
if i flash everything i get a fail but if i only flash ap it passes?
Click to expand...
Click to collapse
No you shouldn't get a fail.
If you're encountering any issues in flashing via Odin make sure to use the latest version 3.12.3

AK2H said:
No you shouldn't get a fail.
If you're encountering any issues in flashing via Odin make sure to use the latest version 3.12.3
Click to expand...
Click to collapse
im using 3.12.7 and i am already on nougat but i want to flash all the files instead of only AP
is it possbile that it fails because the model number i have a 320FL not the F but i flashed the AP of F on FL it worked but if i want to flash all files it gives fail?

khanvict90 said:
im using 3.12.7 and i am already on nougat but i want to flash all the files instead of only AP
is it possbile that it fails because the model number i have a 320FL not the F but i flashed the AP of F on FL it worked but if i want to flash all files it gives fail?
Click to expand...
Click to collapse
Many people reported that the Russian firmware is working flawlessly on A320FL Model and no one mentioned any issues during the flash process.
For me, first time i flashed the rom the flash progress stopped near the end because i was using the 3.10.7 (not 3.12.7 as you mentioned) version just like you.
After using the 3.12.3 version it worked perfectly.
So you nead to use the latest version of Odin (3.12.3)

Whether this method can be applied in galaxy a7 2017 running in nougat?

Stable Pie ROM for Honor 6x

DISCLAIMER
This ROM is not my work. It belongs to Askucio Droid (Sorry if I got the spelling wrong) & Team Pixys OS. I am just posting on this section for our devices with detailed instruction.
WARNING
Your warranty is now void. I am not responsible if you brick your device. Please make sure you know what you're doing and don't proceed if you don't meet the requirements. However I will try to help all I can.
REQUIREMENTS
*Unlocked Bootloader
*You must be on Stock EMUI 8
*Honor 6x
*TWRP recovery
*Non-Rooted Device
*Patience
DOWNLOAD
OpenGapps: https://opengapps.org
(Download the nano package for arm64 & Android 9)
ROM: https://sourceforge.net/projects/pixys-os/files/pie/hi6250/
(Download latest zip.)
INSTALLATION
*Boot your device into TWRP recovery.
*Wipe->Format Data->YES->Advanced Wipe.
*Mark Dalvik/ART Cache, Cache, Data, Internal & System.
*Perform the wipes. Only wipe these mentioned and nothing else.
*Now go to install and select Pixys OS zip. Delay: 2-4 min.
*Wipe Cache and then install Gapps. Delay around 3-4 min. Again wipe Cache.
*Now goto Reboot-> Power Off/Shutdown.
*Now plug your USB cable into computer and other end into phone while holding Volume Down and boot into Bootloader.
*Flash Stock Recovery for your device.
*Power off by holding power button. Once phone restarts hold Volume Up to enter into erecovery and Wipe Data/Factory Reset.
*Wipe Cache and Reboot.
*Initial Configuration and Start.
Rooting
Boot your device into Bootloader and flash TWRP from Elemental ROM thread (Be sure to thank KingOfMezi). After that flash latest Magisk for root goodies.
If you face any problem feel free to ask. ROM is not mine. I simply make the guide to flash on Honor 6x. All credit goes to Askucio Droid and Pixys OS Team.

Great post!
I still have to rebrand and update to emui8.
Looks like a huge job.

I'm using this rom since 3 weeks ago and is so smooth and daily driver.
PD: Would be nice if you reference the original post of @Askuccio_DROID on P8 Lite forum:
[ROM] [PIE 9.0.0_r10] [OFFICIAL] PixysOS for Huawei Hi6250
Thanks for sharing here

After installing the ROM, you can easily get into bootloader by selecting bootloader during the reboot option in twrp. It's a bit easier than trying to get the buttons & timing right to get into bootloader to flash the stock recovery.

Hi sir thank you for this guide always wanted to flash this pixy os but no detailed instructions for pur device..
Im just a newbie here..
Can you help me find the link for the recovery for my device.
im on BLL-L22?
anyone pls help me

BLL-L22 ? You mean stock recovery? Are you on stock EMUI 8? India? If you have update.app u can easily extract it. But if you can't then I will do it for you once the download finishes.

galapagos said:
After installing the ROM, you can easily get into bootloader by selecting bootloader during the reboot option in twrp. It's a bit easier than trying to get the buttons & timing right to get into bootloader to flash the stock recovery.
Click to expand...
Click to collapse
I always find buttons easy. But yeah you can do that as well. I guess whatever suits you.

Alex19Gam said:
I'm using this rom since 3 weeks ago and is so smooth and daily driver.
PD: Would be nice if you reference the original post of @Askuccio_DROID on P8 Lite forum:
[ROM] [PIE 9.0.0_r10] [OFFICIAL] PixysOS for Huawei Hi6250
Thanks for sharing here
Click to expand...
Click to collapse
No idea how to do that but thanks for doing that. I can't even spell the name right LOL :silly:

Mannan Qamar said:
BLL-L22 ? You mean stock recovery? Are you on stock EMUI 8? India? If you have update.app u can easily extract it. But if you can't then I will do it for you once the download finishes.
Click to expand...
Click to collapse
Oh man....I think I need to rebrand first for this then get the emui 8 im still running on emui 5...im from the Philippines..
so the stock recovery should be on the updater.app the ill just extract that file then I need to look for "recovery.img"?
is that how its done?

Well first you need to update to EMUI 8. You will probably have to download Indian or China version of EMUI 8 from Firmware Finder. I suggest China. Once downloaded just rebrand/update. Now in the update.zip you will find an update.app it is around 2-3 GB. Download Huawei Firmware Extractor and then extract Recovery_ramdis.img That's it. Now flash it normally.
Reading your post I conclude you are on EMUI 5 correct? What is your model number? It might help with the rebranding.

Is the moble metwork standby battery drain bug in this rom?

Mannan Qamar said:
Well first you need to update to EMUI 8. You will probably have to download Indian or China version of EMUI 8 from Firmware Finder. I suggest China. Once downloaded just rebrand/update. Now in the update.zip you will find an update.app it is around 2-3 GB. Download Huawei Firmware Extractor and then extract Recovery_ramdis.img That's it. Now flash it normally.
Reading your post I conclude you are on EMUI 5 correct? What is your model number? It might help with the rebranding.
Click to expand...
Click to collapse
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning

Can I upgrade from EMUI 5.x ???

ubaidpks said:
Can I upgrade from EMUI 5.x ???
Click to expand...
Click to collapse
No. You will brick your phone. First upgrade to EMUI 8

jhorne917 said:
Is the moble metwork standby battery drain bug in this rom?
Click to expand...
Click to collapse
No. Battery Life is awesome. No drain on standby.

jlan007 said:
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning
Click to expand...
Click to collapse
Sure. Just follow this guide and you will be up and running in no time.
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Also recovery is flashed through fastboot using either powershell or command prompt through your PC
Go-to the above link and download HWOTA and the three update files. Extract HWOTA to the C Drive of your PC. Rename them as suggested in thread. Now transfer the files to Download folder inside HWOTA 7 folder. Now boot your phone into Bootloader and connect to the PC. Now run update.bat it will flash TWRP recovery. Once it says waiting for device to boot into TWRP, disconnect the device and hold Power & Volume Up to boot into TWRP. Once in there reconnect to Computer and press enter twice.
Now select:
Update from-> using script-> change location-> BLN-AL20. It will flash OEM-Info and then ask for your bootloader unlock code and continue. Now wait patiently for it to finish. Once flashing is complete select to keep Bootloader unlocked.
Upon first boot you won't have network signal. Solution is in the linked thread but Don't ignore it and fix signal first then after that flash Pixys OS by following OP.
Now to extract Stock Recovery follow these:
Extract the main update.zip
Download Huawei Update Extractor from XDA. Search for it.
Launch Huawei Update Extractor and go to Settings and disable first option. Now press three dots to browse and navigate to extracted folder and select Update.app
Double click on Recovery_Ramdis.img and extract it to desktop. You will get animage file and another one. Delete the other one. Now flash image file as you would flash TWRP. If you need more help, Just ask.

One question, can I transition from Resurrection Remix Oreo? Or do I have to flash EMUI 8 again?

Hello,
I am using an Honor 6X model number BLN-L21 running Emui 5.0.1.
Phone has unlocked bootloader and is rooted.
Since is unlocked OTA updates are no longer working so I am stuck on 5.0.1.
If I understood correctly I have first to upgrade to Emui 8.0 stock fw and then pass to this custom rom.
Could you please write me a small recap/tutorial I can follow to jump my phone in Emui 8?
Thanks,
Andrea.

jasonalejandro507 said:
One question, can I transition from Resurrection Remix Oreo? Or do I have to flash EMUI 8 again?
Click to expand...
Click to collapse
Yes you can but to be on the safe side I would advise to restore EMUI 8 first. Though you can go directly if you wish.

Sephiroth79 said:
Hello,
I am using an Honor 6X model number BLN-L21 running Emui 5.0.1.
Phone has unlocked bootloader and is rooted.
Since is unlocked OTA updates are no longer working so I am stuck on 5.0.1.
If I understood correctly I have first to upgrade to Emui 8.0 stock fw and then pass to this custom rom.
Could you please write me a small recap/tutorial I can follow to jump my phone in Emui 8?
Thanks,
Andrea.
Click to expand...
Click to collapse
jlan007 said:
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning
Click to expand...
Click to collapse
Sure. Just follow this guide and you will be up and running in no time.
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Also recovery is flashed through fastboot using either powershell or command prompt through your PC
Go-to the above link and download HWOTA and the three update files. Extract HWOTA to the C Drive of your PC. Rename them as suggested in thread. Now transfer the files to Download folder inside HWOTA 7 folder. Now boot your phone into Bootloader and connect to the PC. Now run update.bat it will flash TWRP recovery. Once it says waiting for device to boot into TWRP, disconnect the device and hold Power & Volume Up to boot into TWRP. Once in there reconnect to Computer and press enter twice.
Now select:
Update from-> using script-> change location-> BLN-AL20. It will flash OEM-Info and then ask for your bootloader unlock code and continue. Now wait patiently for it to finish. Once flashing is complete select to keep Bootloader unlocked.
Upon first boot you won't have network signal. Solution is in the linked thread but dont ignore it fix it first and after that flash Pixys OS by following OP.
Now to extract Stock Recovery follow these:
Extract the main update.zip
Download Huawei Update Extractor from XDA. Search for it.
Launch Huawei Update Extractor and go to Settings and disable first option. Now press three dots to browse and navigate to extracted folder and select Update.app
Double click on Recovery_Ramdis.img and extract it to desktop. You will get animage file and another one. Delete the other one. Now flash image file as you would flash TWRP. If you need more help, Just ask.
Follow along. You're both in the same boat.

Root unsuccessful everytime

I tried every method but still can't get the root access. My device is on the latest January update.
Kindly help me to root my device.

Have you unlocked the oem lock? Make sure the rooting procedure is updated.

kazim.asghar said:
Have you unlocked the oem lock? Make sure the rooting procedure is updated.
Click to expand...
Click to collapse
yes i did unlocked the bootloader and also the oem lock option is grey in settings

sunmughans said:
yes i did unlocked the bootloader and also the oem lock option is grey in settings
Click to expand...
Click to collapse
If its unlocked and its g975+ use these FILES already patched with magisk and also have twrp in it. Just flash these using Odin. After flashing you must install magisk manager if not installed.
Edit. These files are from CAROTIX CARHDMOD thread and is android Q.

comsite said:
If its unlocked and its g975+ use these FILES already patched with magisk and also have twrp in it. Just flash these using Odin. After flashing you must install magisk manager if not installed.
Edit. These files are from CAROTIX CARHDMOD thread and is android Q.
Click to expand...
Click to collapse
Thanks sir, let me download it and flash first. I'll revert you after finishing the process.

What type of S10+ you have ?
Sent from my SM-G9750 using Tapatalk

comsite said:
If its unlocked and its g975+ use these FILES already patched with magisk and also have twrp in it. Just flash these using Odin. After flashing you must install magisk manager if not installed.
Edit. These files are from CAROTIX CARHDMOD thread and is android Q.
Click to expand...
Click to collapse
TWRP Installed successfully! But One UI isn't booting. Bootloop.......

sunmughans said:
TWRP Installed successfully! But One UI isn't booting. Bootloop.......
Click to expand...
Click to collapse
Wipe data from twrp then use multidisabler from ian thread flash it through twrp. Then reboot and report.

comsite said:
Wipe data from twrp then use multidisabler from ian thread flash it through twrp. Then reboot and report.
Click to expand...
Click to collapse
Working bro

sunmughans said:
Working bro
Click to expand...
Click to collapse
Good to hear

comsite said:
Good to hear
Click to expand...
Click to collapse
I want to upgrade to January patch without losing twrp and magisk. Is there any working guide ?

sunmughans said:
I want to upgrade to January patch without losing twrp and magisk. Is there any working guide ?
Click to expand...
Click to collapse
Download latest firmware jan patch from sammobile patch it with magisk app you already have. Download ian recovery for android Q patch this too and rename patched_recovery.img to recovery.img. Open patched firmware ap tar with 7zip put patched recovery in this tar. And flash it. If you wanna save whe data using HOME_CSC.
OR
Simply dirty flash beyond rom you will automatically upgraded to jan patch and also with lots of useful mods too.

comsite said:
If its unlocked and its g975+ use these FILES already patched with magisk and also have twrp in it. Just flash these using Odin. After flashing you must install magisk manager if not installed.
Edit. These files are from CAROTIX CARHDMOD thread and is android Q.
Click to expand...
Click to collapse
Will these files work on my S10 + Exynos uk
Thank you

Wingchundub said:
Will these files work on my S10 + Exynos uk
Thank you
Click to expand...
Click to collapse
Yes as mine is also s10+ uk

Appreciated fella, Thank you
just to clarify, I have 1 x AP rar file aka patched and 3x Md5

Wingchundub said:
Appreciated fella, Thank you
just to clarify, I have 1 x AP rar file aka patched and 3x Md5
Click to expand...
Click to collapse
Yes. You have all files.

Phone came today, seller has updated it to 10 ONE UI v2.0
So i will downgrade, as my current bootloader binary code aka 3 is the same as the last version of android 9, so i am able to downgrade, which i'd rather do to be safe, before i proceed with root method.

Downgraded to v9, all is well, but OEM UNLOCK was not showing in developer options, so did the change date to 8 days before trick and OEM UNLOCK is back

OK, i followed tut oem greyed out,and proceeded with install, all ok, now rooted after using disabler and installing magisk manager.
Also not sure if a new thing or need additional program on my laptop, but i can not transfer files from laptop to the sd card or internal of phone.
I get your path sdcard is not accessible alot?
Is this due to android 10? am i best installing another rom, pref v9
All the folders in internal of phone are not named as normal, just all mixed numbers and letters

Wingchundub said:
OK, i followed tut oem greyed out,and proceeded with install, all ok, now rooted after using disabler and installing magisk manager.
Also not sure if a new thing or need additional program on my laptop, but i can not transfer files from laptop to the sd card or internal of phone.
I get your path sdcard is not accessible alot?
Is this due to android 10? am i best installing another rom, pref v9
All the folders in internal of phone are not named as normal, just all mixed numbers and letters
Click to expand...
Click to collapse
You need to wipe data from twrp.
You must have to wipe data if rooting first time.
Anyways don't do any lengthy processes like downgrade or flash any firmware. Just wipe.
Turn off phone and boot into twrp by pressing power+volume up+bixby. Choose wipe then either format data or choose advance and wipe it.

Samsung Galaxy Tab S7 Model SM-T875 finally Rooted

Hello. I have managed to Root My Samsung Galaxy Tab S7 Model SM-T875 with KNOX value 0x1 and no custom recovery has been installed. I am linking an image from Root Checker
bit.ly/3kOE6NW
Sorry for bitly link guys, this is my first post so not allowed to post url, pls understand
Only for SM-T875
If you have any other models, let me know, I will patch their boot.tar and provide link for the same
Steps for root :
Download and install the latest version of Magisk Manager
Make sure you have an unlocked boot loader
On your PC, download Odin and put your S7 into download mode
Flash the tar file listed here
I am linking the exact boot.tar image I used
bit.ly/3j4mYDw
Sorry for bitly link guys, this is my first post so not allowed to post url, pls understand
In Odin, select the AP option, make sure ur tab is connected in COM1 and then select the boot.tar file. Once flashed, you have to restart your device.
NOTE
Once this boot.img file is flashed you will get this an error saying your device is not on official firmware and you will have to hard reset your device, go ahead and hard reset your device, you might think its in bootloop but it is not. Once hard reset is done, your device will boot twice, make sure to press the power button each time to skip the unlocked bootloader warning. Once done, set up your tab as new one. Now Magisk Manager will not be installed on your device. For root , go ahead and install Magisk Manager again and this time Magisk will be installed in your device and your Knox value will be 0x1 and warranty will be void and device will be rooted
If any questions, please feel free to ask
Hope this helped you

Did someone confirmed?*I wait to got the root before to buy this model specifically

T870
Hi, can you please upload the patched boot img for SM-T870?
Thanks in advanced..

Sushantydv said:
Hi, can you please upload the patched boot img for SM-T870?
Thanks in advanced..
Click to expand...
Click to collapse
just copy and past the provided link address he gave into your browser and download

jionny said:
just copy and past the provided link address he gave into your browser and download
Click to expand...
Click to collapse
The link is for the t875 version mate.. i need image file for t870

Sushantydv said:
Hi, can you please upload the patched boot img for SM-T870?
Thanks in advanced..
Click to expand...
Click to collapse
Sure, here ya go
bit.ly/33DC7GM
If this img file is not flashing, make sure to tar it using 7-zip and then flash from ODIN.
This is the boot.img from the latest version of Android Q (release Sep 1) so make sure you're on the same version before flashing this.
Let me know if this worked or if you need the boot file for any other version
also, sry for bitly link, am not trying to profit out of this, once my 10 posts are complete, i'll post direct download links.
Thx for understanding

umibuzu said:
Did someone confirmed?*I wait to got the root before to buy this model specifically
Click to expand...
Click to collapse
Not that I should be saying this, but if you want to know, I have done the same steps on both of my Tab S7's and bot are working while being rooted. If you still want someone else to confirm, im totally fine with it. Thx for replying tho.

Sushantydv said:
The link is for the t875 version mate.. i need image file for t870
Click to expand...
Click to collapse
T870 XAR version. Be sure to select the proper ver... TH1 or TI4 or TJ4.
Updated 11-2-20
https://forum.xda-developers.com/galaxy-tab-s7/how-to/magisk-t4159291

Could you do t878?

jhill110 said:
T870 XAR version. Be sure to select the proper ver... TH1 or TI4 or TJ4.
Updated 11-2-20
https://forum.xda-developers.com/galaxy-tab-s7/how-to/magisk-t4159291
Click to expand...
Click to collapse
Is there a working custom recovery (TWRP) for the T875/870 yet? Haven't found anyone mention it so far.

rosrog said:
Is there a working custom recovery (TWRP) for the T875/870 yet? Haven't found anyone mention it so far.
Click to expand...
Click to collapse
Unfortunately no.

I have T875 TabS7 brand new I have Build number
QP1A.190711.020.T875XXU1ATI4 and device says upd are available ATJ4 Something. with october patch. The boot image you have linked is of which firmware ?. Should I update and then root.
EDIT:
Anyways i followed this guide by Dr ketan for rooting which i used for my Note 20 Ultra and it didnt work with patching AP file method.
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/guide-how-to-root-n20-ultra-t4147023
So i downloaded the latest firmware which was ATJ4 my CSC version was CAC so i downloaded same firmware from SAMFW(super website with downloads resumable via google drive option.
1. I extracted boot.img.lz4 from AP file of stock firmware downloaded and made a TAR file of it with 7Zip
2. Put it in phone and used magisk manager on tab to patch this file
3. Copy back to PC and flash via odin 3.14.3 in AP tab and uncheck auto reboot in ODIN
4. Booted straight into stock recovery and wiped/factory reset
5. Now i have root on Tab S7 T785.
Here is a link to boot file patched for TAB S7 N985 LTE Latest ATJ4 Firmware .
http://www.mediafire.com/file/mhss32jmt1b1oza/Patched_BooT_ATJ4_TAB_S7_N985.zip/file

Possible to Root SM-T878U ?

Smoker1 said:
Possible to Root SM-T878U ?
Click to expand...
Click to collapse
Yeah it might be.

I have gotten a TWRP up and running on my Galaxy Tab S7 but it's not functioning properly, I'll post the stable version here in case I figure out one haha.

I have the Tab S6 and I love it. I am thinking to buy the Tab S7+. I was very quick to root the Tab S6 and did not take much notice of the Knox trip. Is there any sell value if the tablet cannot have certain apps working such as secure folder? I understand even if you unroot and relock the bootloader then knox is still going to be changed to 0x1
My Tablet still seems to be 0x0 though.

CamronCamr said:
Yeah it might be.
Click to expand...
Click to collapse
Any luck on this? I also was dumb enough to get this T878U from ATT. I realize I have a signed locked bootloader. Is there any hope for us? I'm fairly technical and can follow directions

I'm in the same boat. Att locked out usb and wifi tethering. A rooted device would be very helpful.

Did you have any luck with magisk hide(safetynet)? I'm still waiting for fingerprint for magisk-hide-props-config.

Is this possible for the SM-T978U?

legokangpalla said:
Did you have any luck with magisk hide(safetynet)? I'm still waiting for fingerprint for magisk-hide-props-config.
Click to expand...
Click to collapse
On the latest Samsung Tab S7 T875 Stock firmware Android 11 and one UI 3.1 , i have it rooted with Magisk V22 , widevine is L1, and safetynet passed .
Running with following magisk modules
1. Magiskhide props Config (Just install no config set
2. Riru
3. Riru Edxposed
4. Universal safetynet Fix V2.00 Test version 2 Thanks to kdrag0n