I created a flash-able zip file to flash Android Q's NotoColorEmojis and i have uploaded it into my drive so you can download it. I can't say that it will work for Android Lollipop or below.
REQUIREMENTS:
1: Unlocked Bootloader
2: Custom Recovery
3: No root Required
4: A zip attached in Thread
STEPS:
1: Download Zip below attached.
2: Place in internal Storage or SD card or OTG USB.
3: Reboot to recovery.
4: Select storage and find the zip.
5: Flash and Reboot System.
Enjoy
Hit thanks if you like!
See Ya
#QAZTECH
https://drive.google.com/open?id=1uI-snOKWciKShzhE-zzQJ3t47yE-3I3v
XDA:DevDB Information
Android Q - FLASHABLE emojis, Tool/Utility for the Moto G4 Plus
Contributors
geetaroraqaz
Version Information
Status: Stable
Created 2019-07-16
Last Updated 2019-07-16
Does the zip contain all the emojis that are also in Android Oreo and Android Pie?
Related
New sources found, for the next version of this Rom all the credits belongs to @Ciro and his team for having created the Ciro's Project Lucky
Link TWRP, STOCK FIRMWARE AND CAMERA FIX :
https://mega.co.nz/#F!CA8khTCK!cHzF_HYFgYACwOWju56UPQ
Link ROM:
How To Install:
1) Download the folder with all files (recommended) or all of the individual files (if you already have some necessary file on your computer and do not want to re-download)
2) Make a backup because the system will be formatted
3) From the current recovery do everything possible to wipe excluding sdcard
4) Start the phone in Download Mode
5) Connect your phone to your computer and start Odin
6) Check that the phone is marked on odin as COM: "Number" and that the boxes are checked ONLY "Auto reboot" and "F. Reset Time")
7) Click on AP and select the firmware file you downloaded
8) Wait for checks the md5
9) Press on start
10) After the device reboots; after the re-start it off and re-enter Download Mode
11) Reopen Odin and cliccrare AP
12) Select the file of TWRP
13) Click on Start and wait for the end; after the device starts
14) Copy the files of the Rom
15) Turn off your device
16) Go into recovery mode (Vol UP + Home Button + Power Button)
17) Select Wipe Data and then "Yes - Wipe all user data"
18) At the end of the process choose Wipe Cache and then back to "Yes"
19) At the end of the process and then choose Advanced Wipe Dalvik-Cache and then select "Yes"
20) At the end of the process, select "Install Zip", then "choose zip from / sdcard" and select the zip of the rom and then press "Yes"
21) At the end of the process do a Wipe of the Cache
22) At the end select "reboot system" and wait for the boot (5-10 min)
ME AND THE FORUM WE DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE TO YOUR DEVICE. IF YOU BRICK FLASH THE ORIGINAL FIRMWARE.
XDA:DevDB Information
Bradex Rom S6, ROM for the Samsung Galaxy S3 Neo
Contributors
fraross, Ciro
Source Code: http://forum.xda-developers.com/galaxy-s3-neo/development/rom-ciro-s-rom-t3356584
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Stock 4.4
Based On: Samsung Stock
Version Information
Status: Stable
Current Beta Version: Bradex ROM 9.0
Beta Release Date: 2015-09-25
Created 2015-04-15
Last Updated 2016-06-11
Reserved
Reserved
I'll test. Send a link and I will install it right away. ?
Sent from my GT-I9301I using XDA Free mobile app
I want to test it man
I want to test this rom
Can you send a link I will test it
is it working both dual sim and single sim ??
The developer settings doesnt work
I want to test My phone gt-i9301i
did you ported this rom on lollipop?
fraross said:
WARNING: I WANT TO REPORT THAT THE ROM HAS NOT BEEN CREATED BY ME BUT IT'S ONLY THE PORTING PORTING OF THE ONE OF @singhking83 . ALL CREDITS TO HAVE CREATED THE ROM BELONG TO @singhking83. IF YOU LIKED THIS ROM PLEASE SAY THANKS TO @singhking83
I'M LOOKING FOR DEVELOPERS AND TESTER FOR THIS PORT.
UNTIL @singhking83 DOESN'T ANSWER TO MY PRIVATE MESSAGE FOR PERMISSION TO MODIFY HIS ROM I CAN NOT SHARE THE LINK THAT CONTAINS THE WORK THAT I HAVE DONE UNTIL NOW.
WHEN HE WILL ANSWER I'LL SHARE THE LINK...
ME AND THE FORUM WE DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE TO YOUR DEVICE. IF YOU BRICK FLASH THE ORIGINAL FIRMWARE.
XDA:DevDB Information
Bradex Rom S6, ROM for the Samsung Galaxy S3 Neo
Contributors
fraross
Source Code: http://forum.xda-developers.com/galaxy-grand-2/development/rom-s6-styled-s5port-rom-t3061428?nocache=1
ROM OS Version: 5.0.x Lollipop
ROM Firmware Required: Stock
Based On: Samsung Stock
Version Information
Status: Testing
Current Stable Version: not relased yet
Current Beta Version: V1.0
Beta Release Date: 2015-04-15
Created 2015-04-15
Last Updated 2015-04-15
Click to expand...
Click to collapse
i can test it bro
test
I will test it if it
my device is I9300I
This is the link of my work:
https://mega.co.nz/#!bQliFIII!o37BeEaTn8g667k00Q1Yw2ZxBjrf4MoXzdWTLArNlEw
This is a port for the single sim version of s3 neo. I still haven't tested it...
WORKS ONLY WITH GT-I9301I
Should i try it on the dual sim version?
viraj147 said:
Should i try it on the dual sim version?
Click to expand...
Click to collapse
No, if you try to flash it on dual sim version your device will go in brick or bootloop
does the developer option work in your rom, because i try it orginal bradex rom and they doesnt work?
ok thanks
any news on when you will make it for the dual sim version?
Please port it to dual sim I9300I
For this version of Bradex Rom, I'm basing on another Rom. For now, I want to do a porting of the base Rom working.
Can we get more info?
Does Install instruction are the same? wipe cache and data and install zip?
recovery installation? TWRP or CWM?
Can we install from CM12 or only from base stock?
Any screenshot?
Can any one provide flashable zip for Android N developer preview 3? I am currently on unencrypted and rooted preview 2.
ASUS - ZenFone 4 Pro - Z01G
Android 8.0.0 OREO
Version: WW-15.0410.1904.104
*** WARNING ***
This Flashable Zip is NOT coded to prevent cross-flashing. If flashing is initiated on an unsupported device it WILL brick the device.
YOU ASSUME ALL RESPONSIBILITY!!
Notes:
This package was designed to allow everyone who has a ASUS ZenFone 4 Pro - ZS511KL and an operational TWRP recovery to fully update to the latest device software. This software can also help restore a devices functionality. It is meant for WW-Phones not JP-Phones.
This zip was built off the official WW-15.0410.1904.104 update posted on the ASUS website.
- The system partition is unchanged.
- Stock firmware's are included from the official OTA.
- The recovery.img has been replaced with an Unofficial TWRP 3.2.1-0 built with the latest device kernel for OREO.
- The boot.img has been patched to disable DM-Verity.
Installation:
Wipe the Dalvik, System, Data, and Cache
Transfer Zip
Flash
Reboot
Enjoy
Download Link
Thanks to shakalaca for his efforts in getting TWRP to our devices!!
TheCapesCrew said:
ASUS - ZenFone 4 Pro - Z01G
Android 8.0.0 OREO
Version: WW-15.0410.1904.104
*** WARNING ***
This Flashable Zip is NOT coded to prevent cross-flashing. If flashing is initiated on an unsupported device it WILL brick the device.
YOU ASSUME ALL RESPONSIBILITY!!
Notes:
This package was designed to allow everyone who has a ASUS ZenFone 4 Pro - ZS511KL and an operational TWRP recovery to fully update to the latest device software. This software can also help restore a devices functionality. It is meant for WW-Phones not JP-Phones.
This zip was built off the official WW-15.0410.1904.104 update posted on the ASUS website.
- The system partition is unchanged.
- Stock firmware's are included from the official OTA.
- The recovery.img has been replaced with an Unofficial TWRP 3.2.1-0 built with the latest device kernel for OREO.
- The boot.img has been patched to disable DM-Verity.
Installation:
Wipe the Dalvik, System, Data, and Cache
Transfer Zip
Flash
Reboot
Enjoy
Download Link
Thanks to shakalaca for his efforts in getting TWRP to our devices!!
Click to expand...
Click to collapse
Nice. Works for me
Magisk and Data
Thank you for share your work TheCapesCrew. I Just download the rom and I should flash it today.
I'd like to know if it already comes with magisk or if I can follow the standard procedure to install it.
Should I use the boot.img inside your rom, or the original from ASUS website to add magisk to the system?
And there's anyway to flash your rom without data loss?
I'm currently with version WW_ZS551KL_15.0410.1812.95_0 version with magisk 19.2 and TWRP 3.2.3-0-Z01G on my Zenfone 4 pro.
Thank you so much!
You should be able to flash right over. I would stick with my bootloader since it matches the kernel version and recovery kernel. The recovery I included has the correct kernel also. I actually compiled a twrp that's newer. 3.3.1, just haven't published it yet.
Update
TheCapesCrew said:
You should be able to flash right over. I would stick with my bootloader since it matches the kernel version and recovery kernel. The recovery I included has the correct kernel also. I actually compiled a twrp that's newer. 3.3.1, just haven't published it yet.
Click to expand...
Click to collapse
Hey TheCapesCrew, I hope you are doing good.
Did you keep working on ZenFone 4 Pro images?
I'd like to know if you did any newer image flashable for this phone.
Thank you very much!
Hi,
How are you there. Can you make android 9.0 rom for this phone. thank you
Make android 9/10 custom rom, please ...
Blacked out twrp images for Samsung F international models.
To install: Download the image for your model of phone S7,S7E,S8,S8+,N8,S9,S9+ or N9 F **INTERNATIOAL ONLY**
Reboot to recovery and press install then select install image. Choose the image you have downloaded and select flash to RECOVERY section and swipe to install. Now reboot to recovery and enjoy
S7 images link: https://www.androidfilehost.com/?w=files&flid=294239
S7 Edge images link: https://www.androidfilehost.com/?w=files&flid=274184
S8 images link: https://www.androidfilehost.com/?w=files&flid=294243
S8+ images link: https://www.androidfilehost.com/?w=files&flid=294241
N8 images link: https://www.androidfilehost.com/?w=files&flid=294242
S9 images link: https://www.androidfilehost.com/?w=files&flid=294245
S9+ images link: https://www.androidfilehost.com/?w=files&flid=294246
N9 images link: https://www.androidfilehost.com/?w=files&flid=294244
Telegram channel link : https://t.me/MKUltraBlack
XDA:DevDB Information
MKUltraBlack Recovery, Theme for the Samsung Galaxy S8+
Contributors
MKUltraBlack
Version Information
Status: Stable
Current Stable Version: 3.3.1
Created 2019-05-27
Last Updated 2019-05-26
This is a temporary guide until an official XDA thread of crDroid 9 by the maintainer is out
I'm posting the latest ROM info, install method and files for the users who are crDroid fans like me
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
I'm not the maintainer or a crDroid dev
crDroid is a vanilla ROM, so there's no Gapps included
You don't have to be on OOS 13 to install the new CrDroid update as OOS 13 Framework is included
If you're on an OOS 12 or 13 based Custom ROM -> reboot to recovery -> factory reset then follow the clean flash method
The vbmeta and recovery.img files are from the payload.bin file of the ROM.zip file
The .img files are compressed into a .zip file and the tool I used to extract them are attached below
Flashing Instructions:
For flashing/getting OOS 12 in both slots:
Use Msmtool to come back on oos 11.
Download latest full zip of oos 12 from Oxygen Updater app or from OxygenOS builds XDA thread (You need to know your model number!)
Download and install the OPLocalUpdate apk from this XDA thread
Go into Settings -> system update -> local upgrade
Find the OOS 12 .zip you just downloaded from oxygen updater
Install it and reboot
Repeat steps 4 to 6 (To install OOS 12 on both slots)
Unlock bootloader
For first time install/ Clean Flash:
Have an unlocked bootloader & OOS 12 (C20 - C36) flashed to both slots.
Download ROM the file named like this: crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip
Download vbmeta, recovery for your device which is in the .zip file attached below
Put it in the same folder where your ADB/platform-tools files are
Reboot to bootloader
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
Choose "Factory reset"
Choose "Apply update" -> "Apply from ADB"
adb sideload "crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip"
Reboot to recovery.
Choose "Apply update" -> "Apply from ADB"
adb sideload gapps.zip (Nikgapps basic or full recommended)
If you want to install NikGapps Addons do this
Otherwise, go to the next suggestion if you want root or just reboot to system. Up to u
Reboot to recovery
Choose "Apply update" -> "Apply from ADB"
adb sideload addons.zip
Repeat step 1 - 2 for other addons
If you want root do this
Reboot to recovery
Choose "Apply update" -> "Apply from ADB"
adb sideload magisk.zip
OR adb sideload magisk.apk
Reboot to system & Enjoy!
Otherwise, just reboot to system. Up to u
To update:
Download ROM the file named like this: crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip
Put it in the same folder where your ADB/platform-tools files are
Reboot to recovery
Choose "Apply update" -> "Apply from ADB"
adb sideload "crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip"
Reboot to system & Enjoy!
Recommended Gapps:
NikGapps-T basic or full
- T is for Android 13
- SL is for Android 12.1/12L
- S is for Android 12
Recommended NikGapps Addons:
More about NikGapps Addons is in the "NikGapps Addon info" post below
SetupWizard addon
Sources:
ROM: https://github.com/crdroidandroid
Download:
Temporary Links:
Until it's on the official site
ROM: download
Flashing files: download
Official Links:
ROM: download
NikGapps: download
NikGapps Addons: download
OOS versions for OP8Pro (under Signed Flashable zips) Here
Changelog: Changelog
crDroid OnePlus 8 Telegram group
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to support the dev
XDAevDB Information
crdroidandroid, ROM for the OnePlus 8P
Contributors
Saurabh Parab
Source Code: https://github.com/crdroidandroid
Updates:
28/10/22 - crDroid v9.0 Unofficial build was released for OP8 & OP8 Pro
Android: 13
Based on: OOS 12 Framework
Security Patch: October (2022-10-05)
Notes:
Need Clean Flash
"The Bootloader is unlocked" screen is removed
Widevine L1 and HDR works
Kcal and per-app refresh rate is here
Screen resolution changer in display settings (1080P FHD+ and 1440P QHD+)
Issues:
No OTA and will be available in next update
No face unlock
No OOS cam
There's risk of poor SoT/battery life
Call recorder has issues
Google photos brightness bug
30/10/22 - Created this thread to help users install latest crDroid 9
11/11/22 - Anticipated official Crdroid 9.0 will come out soon
Based on: OOS 12 Framework
Security Patch: November (2022-11-05)
Notes:
This will be official build with OTA feature
Face unlock will work
No OOS cam
25/12/22 - Official crDroid 9.0 is released!
Based on: OOS 13 Framework
Security Patch: December (2022-12-05)
Notes:
Has OTA Update feature
Face unlock works
No OOS cam
Google photos brightness bug is fixed
New parallel apps with crDroid Launcher only
Issues:
When swiping on lock screen to allow face unlock doesn't work
Google Dialer UI becomes enlarged during calls in QHD+ resolution
26/12/22 - Updated method and added necessary files to install new update
NikGapps Addon info:
These issues were from crDroid 8 (A12.1)
Gboard
For Gboard users, deleting text in the text suggestions tab won't work unless u install the Gboard addon. But it needs to be installed before setting ur device up
A factory reset is needed for it to work, so don't flash it if u got everything set up
GoogleSearch
For google assistant users, "hey google" will not work without installing the GoogleSearch addonas the "google app" needs to be a system app.
But supposedly on crDroid 9 this issue doesn't happen and "hey google" works without the addon
Excellent ROM on my IN2025 with Verizon SIMM. Thanks for your hard work on this!
HolyHog said:
Excellent ROM on my IN2025 with Verizon SIMM. Thanks for your hard work on this!
Click to expand...
Click to collapse
Thanks, but I'm sorry to say that I'm not the maintainer/dev for this ROM.
It's in the disclaimer as well and I cannot take any credit
All I did was create this XDA thread to share this great ROM with people who aren't aware of it
It's good to hear that u managed to install it and everything is going well for you
When official will be released?
this is also my question
crDroidAndroid-13.0-20221223-instantnoodlep-v9.0 has been posted on sourceforge.net. Will there be a separate branch for crDroidAndroid-13.0.
zement said:
crDroidAndroid-13.0-20221223-instantnoodlep-v9.0 has been posted on sourceforge.net. Will there be a separate branch for crDroidAndroid-13.0.
Click to expand...
Click to collapse
Do u mean a XDA thread for crDroid 9.0? For that idk as I'm not the dev/maintainer
New Update!
CrDroid v9.0 is out
[ROM][13][OFFICIAL][OP8 /8 Pro/8T] crDroid v9.0 [23.12.2022]
*** Disclaimer I am not responsible for any damage you made to your device You have been warned crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features...
forum.xda-developers.com