Related
I am using OnePlus 5t and Asus Zenfone 5z currently both with Jio 4g. on oneplus 5t I am continuously getting 3CA but on ASUS ZENFONE 5z I am only getting 2CA at same location nd same time.I have attached screenshot of both phones below.It is strange that last generation oneplus 5t with older SoC supports 3CA and Asus Zenfone 5z with latest SoC supports only 2CA. I think Asus can activate 3CA With software update as SD 845 supports 3CA.SO pls ask Asus to activate 3CA with software update as soon as possible
Screenshots
2nd screenshot
i m on latest fw 80.30.96.80 and 5z show 3CA with jio..u can see in attachment
drpmch said:
i m on latest fw 80.30.96.80 and 5z show 3CA with jio..u can see in attachment
Click to expand...
Click to collapse
If this was 3CA Then on top 4g+ signal should have been there.Ita only showing 4g.netmonster app is not accurate
drpmch said:
i m on latest fw 80.30.96.80 and 5z show 3CA with jio..u can see in attachment
Click to expand...
Click to collapse
See my pic it's showing 4g+ nd only getting 2CA
mannulko said:
See my pic it's showing 4g+ nd only getting 2CA
Click to expand...
Click to collapse
see this pic..its showing 4g+
drpmch said:
see this pic..its showing 4g+
Click to expand...
Click to collapse
Then why I am not getting 3CA? I am also on latest update.My oneplus 5t is getting 3CA
mannulko said:
Then why I am not getting 3CA? I am also on latest update.My oneplus 5t is getting 3CA
Click to expand...
Click to collapse
dont know but here i m getting 3CA in delhi.
drpmch said:
dont know but here i m getting 3CA in delhi.
Click to expand...
Click to collapse
Now yours also showing 2CA
mannulko said:
Now yours also showing 2CA
Click to expand...
Click to collapse
no..thats wrong pic uploded..here is correct one.
drpmch said:
no..thats wrong pic uploded..here is correct one.
Click to expand...
Click to collapse
Looks like something is wrong with my device
drpmch said:
no..thats wrong pic uploded..here is correct one.
Click to expand...
Click to collapse
Pls suggest what should I do now as I am not getting 3CA ? JIO network supports 3CA at my place
mannulko said:
Pls suggest what should I do now as I am not getting 3CA ? JIO network supports 3CA at my place
Click to expand...
Click to collapse
NetMonster app is inaccurate becoz My Nokia 7 Plus supports just 2CA but sometimes the app shows 3CA. As far as I know Zenfone 5z supports only 2CA
Hi all
I bought a Chineese Version of the Redmi Note 8 pro. I installed now V10.4.1.0 Global Rom and it works. Last problem is that i need band 20 to have a good 4G connection.
Is it somehow possible that i can unlock and set this band ?
Kind Regards
You cant add new BANDS. China modem no support him !Re-flashing does not help!
I have 4G+ on my RN8 PRO
tze_vitamin said:
I have 4G+ on my RN8 PRO
Click to expand...
Click to collapse
Yes, but you have probably the global version. I have only 4G on the Chinese one. Until I go on holiday to China, where it will be 4G+!
polfrank said:
Yes, but you have probably the global version. I have only 4G on the Chinese one. Until I go on holiday to China, where it will be 4G+!
Click to expand...
Click to collapse
Yes. I have EU version. I thought that I cant have 4G+ like on Note 7 , because this RN8 pro dont have all bands..
has anyone been able to access Engineer Mode? Mediatek SoCs used to be able to enable bands through it.
ItAintMee said:
has anyone been able to access Engineer Mode? Mediatek SoCs used to be able to enable bands through it.
Click to expand...
Click to collapse
This is for MTK
ItAintMee said:
has anyone been able to access Engineer Mode? Mediatek SoCs used to be able to enable bands through it.
Click to expand...
Click to collapse
yes dial *#*#3646633#*#* for engineering mode
lamkanet said:
yes dial *#*#3646633#*#* for engineering mode
Click to expand...
Click to collapse
可以進去 要在ADB 打指令 adb shell am start -n com.mediatek.engineermode/.EngineerMode
lamkanet said:
yes dial *#*#3646633#*#* for engineering mode
Click to expand...
Click to collapse
cool, but has anyone verified if changes in BandMode enable LTE bands? The G90T has the WorldMode modem and is capable of picking up just about every LTE band used throughout the world.
ItAintMee said:
cool, but has anyone verified if changes in BandMode enable LTE bands? The G90T has the WorldMode modem and is capable of picking up just about every LTE band used throughout the world.
Click to expand...
Click to collapse
Redmi NOte 8 Pro has big problems with LTE 4G + tape management. The phone does not keep the 4G + it switches and stays in 4G all the time. It's a modem management problem that does not support the double-banding needed for 4G +.
Bests Regards
elibraty said:
Redmi NOte 8 Pro has big problems with LTE 4G + tape management. The phone does not keep the 4G + it switches and stays in 4G all the time. It's a modem management problem that does not support the double-banding needed for 4G +.
Bests Regards
Click to expand...
Click to collapse
Hello, could you please specify what kind ofLTE band issues this phone have? I've just ordered Global vers. with 128 GB ROM, where Band 20 (800) is the most important for me, as it is the most frequently used one in Türkiye. It doesn't exist in my Mi5, so hope the signal and speed would be better with Redmi Note 8 Pro.
anyone played around with trying to unlock more bands? pretty sure the modem has the ability to get them all, and is just software locked for one reason or another
Even I go to engineering mode. It still cannot unlock the band 7 / 20.
it seem Chinese version cannot unlock the band.
I hope some expert can do it later and share with us.
How do you use themes?
tze_vitamin said:
I have 4G+ on my RN8 PRO
Click to expand...
Click to collapse
I also have the European version, though how are you able to use themes?
Not working for me.
peoeope said:
I also have the European version, though how are you able to use themes?
Not working for me.
Click to expand...
Click to collapse
Normal. I set Region to my country Serbia and use themes without problems.
elibraty said:
Redmi NOte 8 Pro has big problems with LTE 4G + tape management. The phone does not keep the 4G + it switches and stays in 4G all the time. It's a modem management problem that does not support the double-banding needed for 4G +.
Bests Regards
Click to expand...
Click to collapse
what do you mean by "tape management"? If it's a modem management problem, then it is software related. Helio G9T's HAVE the WorldMode modem, what you're describing doesn't make sense and doesn't answer my question.
---------- Post added at 09:51 PM ---------- Previous post was at 09:49 PM ----------
q26000 said:
Even I go to engineering mode. It still cannot unlock the band 7 / 20.
it seem Chinese version cannot unlock the band.
I hope some expert can do it later and share with us.
Click to expand...
Click to collapse
it's probably a modem firmware issue. the problem is the Helio G90T is only available on the RN8 Pro, so swapping modem firmware from another device isn't happening. I wonder if anyone with the Global variant has tried though.
I have Note 8 pro Global Version and band 7,20 is enable by default.
may work
Alteschwed said:
Hi all
I bought a Chineese Version of the Redmi Note 8 pro. I installed now V10.4.1.0 Global Rom and it works. Last problem is that i need band 20 to have a good 4G connection.
Is it somehow possible that i can unlock and set this band ?
Kind Regards
Click to expand...
Click to collapse
[Обсуждения] [Нужен ROOT] Разблокировка LTE Band на XIAOMI с процессором QUALCOMM
4. Скачать и установить QPST, QXDM
Restriction. I can not give a link. You can try.
My RM8pro is the global version... But in spain doesn´t get de 4g+..... The region it´s set up to spain... i´m so confuse, when i use the app to verify the band always shows b3 (1800) no b20 (800). Some help please¡¡¡¡¡¡
I purchased a Note 8 pro, and I noticed that with Vodafone Italia it does not aggregate nor the bands and I do not have the voLTE, although in the settings it is active.I obviously put the sim to check it was not a temporary disservice and in the Mi 9 I have both 4G + is the voLTE. The model is obviously European EU MIUI 11.
Activated MIMOX4 and CA in MIMO via engineering mode, this will enable LTE-Advance aka LTE+
You should check enable feature, other is depending on your network support and how much you want sacrifice mAH for max speed
ScarletVeil said:
Activated MIMOX4 and CA in MIMO via engineering mode
Click to expand...
Click to collapse
how do I access the mode you described?
Dial *#*#3646633#*#*
robbie_lpl said:
Dial *#*#3646633#*#*
Click to expand...
Click to collapse
Does this also work on the Global version?
yayimathrowaway said:
Does this also work on the Global version?
Click to expand...
Click to collapse
Sure thing.
trxjam said:
how do I access the mode you described?
Click to expand...
Click to collapse
I live in Italy too...Have you solved the problem? I'm thinking of buying this phone too, but I want to know about carrier aggregation...what have you managed to get? 2CA or 3 CA? Anyone else have better information about CA? The bands used in my country are B1 B3 B7 and B20 (B32 too but it is supported only on high-end devices).
Guarino95 said:
I live in Italy too...Have you solved the problem? I'm thinking of buying this phone too, but I want to know about carrier aggregation...what have you managed to get? 2CA or 3 CA? Anyone else have better information about CA? The bands used in my country are B1 B3 B7 and B20 (B32 too but it is supported only on high-end devices).
Click to expand...
Click to collapse
I have not tried it yet, but I am disappointed being an EU model that does not aggregate bands and does not even support voLTE. everything works well on the Mi9, also an EU model.
trxjam said:
I have not tried it yet, but I am disappointed being an EU model that does not aggregate bands and does not even support voLTE. everything works well on the Mi9, also an EU model.
Click to expand...
Click to collapse
Ok, please let me know if you can...I'm waiting on collecting more informations before pulling the trigger on this device.
Yo soy de chile, y el Carrier Aggregation, es posible juntando dos bandas B7 (4G)+B28 (4G) = 4G+, pero no logro que conecte kas dos bandas en simultáneo
trxjam said:
I purchased a Note 8 pro, and I noticed that with Vodafone Italia it does not aggregate nor the bands and I do not have the voLTE, although in the settings it is active.I obviously put the sim to check it was not a temporary disservice and in the Mi 9 I have both 4G + is the voLTE. The model is obviously European EU MIUI 11.
Click to expand...
Click to collapse
What application is used to check the connected bands? I activated CA and MIMO but nothing has changed. Could someone send a screenshot of what the configuration should look like in engineer mode? Thanks.
Mkriiger said:
What application is used to check the connected bands? I activated CA and MIMO but nothing has changed. Could someone send a screenshot of what the configuration should look like in engineer mode? Thanks.
Click to expand...
Click to collapse
Check PM
Pm me too pls, also activated ca and mimo and no change
Bug with 4G+ is already reported to developers...
---------- Post added at 10:28 PM ---------- Previous post was at 10:27 PM ----------
cazcabral said:
Check PM
Click to expand...
Click to collapse
Could you please send to me also what should I do?
hi , how to konw if it is a china version or global ? because in mine *#*#3646633#*#* don't work...
*#*#3646633#*#* works on global, i tried, dunno about other versions, try again if u still got global. after restart has some lag before accessing the menu.
its my wifes phone, i have mi 8, also, she ported the number few days ago, tried my sims in her phone and it shows option Use Volte, is checked but when i input *#*#4636#*#* it aint activated volte and wifi calls ... may its a sim problem. also looses carrier a lot, mobile data sucks ... and before the portation didnt had those problems
also, seen on mi.com version 11.0.6.0 based still on pie, after a search on google i saw (pakistan release) 11.0.2.0 android 10... wierd
i try again , and it don't work , i'm on MIUI Global 11.06.6.0 ( PGGMIXM )
4G+
trxjam said:
I purchased a Note 8 pro, and I noticed that with Vodafone Italia it does not aggregate nor the bands and I do not have the voLTE, although in the settings it is active.I obviously put the sim to check it was not a temporary disservice and in the Mi 9 I have both 4G + is the voLTE. The model is obviously European EU MIUI 11.
Click to expand...
Click to collapse
I think it has something to do with " LTE Physical Channel Configuration "
comparing my Redmi Note 7 pro, It has open and close curly bracket while my Redmi Note 8 pro. There is config written on it.
I've seen a link. Its the same issue regarding 4G+ enabled, I didn't test yet
https://forum.xda-developers.com/mi-a1/how-to/guide-enable-4g-lte-carrier-aggregation-t3894282
I hope some will come up a version for Redmi Note 8 pro
Hello guys, I imported the device in the global version and read on some topic that it does
not support carrier aggregation LTE-Advanced(4G+)/LTE-Advanced-Pro(4.5G) anyone else to confirm this?
I confirm . Same problem whit vodafone italy , no carrier aggregation whit x2 but no problem whit x2 pro
ginepraio said:
I confirm . Same problem whit vodafone italy , no carrier aggregation whit x2 but no problem whit x2 pro
Click to expand...
Click to collapse
Strange that they have limited this on the phone their version is the global one right?
Maybe if we press Realme he will release Carrier Aggregation, do you have the link of the email or forum?
yes, global model with b20, even I could not believe it, probably lte + is not essential but I still cannot understand how it is possible that it is absent in a medium-high end device in 2020. I'm also looking for a forum or an email to ask for explanations.
ginepraio said:
yes, global model with b20, even I could not believe it, probably lte + is not essential but I still cannot understand how it is possible that it is absent in a medium-high end device in 2020. I'm also looking for a forum or an email to ask for explanations.
Click to expand...
Click to collapse
Apparently a large part of these medium-high Chinese smartphones have support for Carrier Aggregation blocked I saw in some post how to unlock the MI9 Chinese version and other phones
may work on Realme X2, however when I get mine I'll do the tests and try to unlock although I think it hardly reaches those speeds in my country and data plan,
well at least there is the B28 band that is not much like that price segment
LMartins.338 said:
Hello guys, I imported the device in the global version and read on some topic that it does
not support carrier aggregation LTE-Advanced(4G+)/LTE-Advanced-Pro(4.5G) anyone else to confirm this?
Click to expand...
Click to collapse
Hello Sir almost everyone is facing this issue. For more info,I would suggest you to join the official telegram group @realmeX2Official , where you can connect with other x2 users and get instant solution for doubts and problems. Also we're working on custom roms. So join to get instant updates.
Oppo RealMe X2 support only Contiguous CA: https://cacombos.com/device?model=RMX1993EX - So this is reason why you don't get LTEA working in your network because your network do Non-Contiguous CA.
olkitu said:
Oppo RealMe X2 support only Contiguous CA: https://cacombos.com/device?model=RMX1993EX - So this is reason why you don't get LTEA working in your network because your network do Non-Contiguous CA.
Click to expand...
Click to collapse
Bro can u tell me about my phn ?? I have s20+ G986W nd I'm using jio sim nd it support band 3,5,40 can u please check that why my mobile is not enabled CA, coz other phones have CA nd they are using jio sim nd their network is LTE+ but in my s20+ is only LTE , nd when I chk 0011# it show's CA not config
FearLesS007 said:
Bro can u tell me about my phn ?? I have s20+ G986W nd I'm using jio sim nd it support band 3,5,40 can u please check that why my mobile is not enabled CA, coz other phones have CA nd they are using jio sim nd their network is LTE+ but in my s20+ is only LTE , nd when I chk 0011# it show's CA not config
Click to expand...
Click to collapse
https://cacombos.com/device/SM-G986W Because your device doesn't support Carrier Aggregation combinations between 3, 5 and 40. You can check that easily on linked website.
olkitu said:
https://cacombos.com/device/SM-G986W Because your device doesn't support Carrier Aggregation combinations between 3, 5 and 40. You can check that easily on linked website.
Click to expand...
Click to collapse
Bro there is no CA bands showing in link it's showing LTE nd LTE 4x4, where I can see ???
FearLesS007 said:
Bro there is no CA bands showing in link it's showing LTE nd LTE 4x4, where I can see ???
Click to expand...
Click to collapse
It show CA combinations = bands what can be aggregated together. Just scroll little bit down to see table.
olkitu said:
It show CA combinations = bands what can be aggregated together. Just scroll little bit down to see table.
Click to expand...
Click to collapse
I check the scroll down but m not understanding can u pls give example of 1,2 examples then I can better understand for future also on same site I will check for new phone
olkitu said:
It show CA combinations = bands what can be aggregated together. Just scroll little bit down to see table.
Click to expand...
Click to collapse
S20+ G985F is global version it's also showing same , nd I sell that global version coz of Exynos nd it was LTE+ enabled, it was support CA with my sim , but the thing is which site link u gave me it's showing same for both, then why my this model not support CA ??
FearLesS007 said:
S20+ G985F is global version it's also showing same , nd I sell that global version coz of Exynos nd it was LTE+ enabled, it was support CA with my sim , but the thing is which site link u gave me it's showing same for both, then why my this model not support CA ??
Click to expand...
Click to collapse
Both model support CA but different combinations. Canada model is optimized to Canadian networks and Global to Global networks like India, Europe, Australia, Middle East... Just different models are targeted to different market area.
Of
olkitu said:
Both model support CA but different combinations. Canada model is optimized to Canadian networks and Global to Global networks like India, Europe, Australia, Middle East... Just different models are targeted to different market area
Click to expand...
Click to collapse
If we install indian firmware ??? Then any solution ???
FearLesS007 said:
Of
If we install indian firmware ??? Then any solution ???
Click to expand...
Click to collapse
I think you can't just install because in India sold global variant and global variant is Exynos vs Canadian variant is Qualcomm...
I am interested in buying IQOO 3. IQOO 3 has Qualcomm Snapdragon 865 processor with a built-in X55 modem which has to support 5G connectivity. But in the base variant of IQOO 3 8/128 GB model, the company has disabled the 5G connectivity. Can I get 5G connectivity in the base variant of IQOO 3 in the future because of the built-in X55 modem?
Please clarify my question.
When you buy, first upgrade does enable 5G radio while second one disables it. It might be possible to root an enable 5G accordingly as long as modem is already there in the phone
Prankey said:
When you buy, the first upgrade does enable 5G radio while second one disables it. It might be possible to root an enable 5G accordingly as long as modem is already there in the phone
Click to expand...
Click to collapse
But I don't think this will happen as there is no kernel and bootloader unlock support for this device from vivo
Seems nice thread, I was confused for the same..Do you think if we can flash 256gb 12gh 5G enable model rom in 128gb 8gb 4G model?
with latest update looks like iqoo has unlocked 5G.
It's again disabled in OTA upgrade couple of days ago
Where is the change log of these updates?
y subramanyam said:
i am interested in buying iqoo 3. Iqoo 3 has qualcomm snapdragon 865 processor with a built-in x55 modem which has to support 5g connectivity. But in the base variant of iqoo 3 8/128 gb model, the company has disabled the 5g connectivity. Can i get 5g connectivity in the base variant of iqoo 3 in the future because of the built-in x55 modem?
Please clarify my question.
Click to expand...
Click to collapse
bro the processor supports 5g but the company hasnt put the antenna for 5g. So the 4g device will not run 5g ?. The 5g was put by mistake in software update and was removed in next software update. Becoz people like you were getting confused whether 4g model supports 5g.
---------- Post added at 02:59 PM ---------- Previous post was at 02:58 PM ----------
prankey said:
it's again disabled in ota upgrade couple of days ago
where is the change log of these updates?
Click to expand...
Click to collapse
bro the processor supports 5g but the company hasnt put the antenna for 5g. So the 4g device will not run 5g ?. The 5g was put by mistake in software update and was removed in next software update. Becoz people like you were getting confused whether 4g model supports 5g.
---------- Post added at 03:00 PM ---------- Previous post was at 02:59 PM ----------
DrNerd88 said:
Seems nice thread, I was confused for the same..Do you think if we can flash 256gb 12gh 5G enable model rom in 128gb 8gb 4G model?
Click to expand...
Click to collapse
No company is not idiot. They are smart enough
Prankey said:
It's again disabled in OTA upgrade couple of days ago
Where is the change log of these updates?
Click to expand...
Click to collapse
In the update menu ?