Develop Bugs

Cyanogen OS system upgrade

Hi all
My friend's wife has a swift with YOG4PAS33J and he says her notifications mention a system upgrade.
Has anyone else noticed same? I ask because https://cyngn.com/support mentiones Cyanogen OS 12.1 (5.1.1) cm-12.1-YOG4PAS33J-crackling.
Thanks

Yes I have installed the upgrade YOG7DAS2FI and now running cyanogen 12.1.1.

Yep - changelog on twitter (Wileyfox).
It seems I haven't posted enough to allow me to post links.

is a ZIP file available for flashing via TWRP?

Dior DNA said:
is a ZIP file available for flashing via TWRP?
Click to expand...
Click to collapse
Thanks to 4PDA
http://4pda.ru/forum/index.php?s=&showtopic=694867&view=findpost&p=45683960
PS Never tried.
I am using CM13 Teamasek's ROM as my daily driver

mermigas said:
Thanks to 4PDA
http://4pda.ru/forum/index.php?s=&showtopic=694867&view=findpost&p=45683960
PS Never tried.
I am using CM13 Teamasek's ROM as my daily driver
Click to expand...
Click to collapse
thanks
FYI the 4PDA is YOG7DAS2BC but above was mentioned YOG7DAS2FI

Dior DNA said:
thanks
FYI the 4PDA is YOG7DAS2BC but above was mentioned YOG7DAS2FI
Click to expand...
Click to collapse
Sorry. My Russian is not so good!!
http://4pda.ru/forum/index.php?s=&showtopic=694867&view=findpost&p=45707464

mermigas said:
Sorry. My Russian is not so good!!
http://4pda.ru/forum/index.php?s=&showtopic=694867&view=findpost&p=45707464
Click to expand...
Click to collapse
your russian seems good enough
meanwhile https://cyngn.com/support got updated

Hey, I'm new to rooting and I'm wondering how I should go about installing this update. I assume I can't just download it OTA, so what steps should I go through to install the update? Should I use the update pack from cyanogen support (can't post link)? If so, which one? cm-12.1-YOG7DAS2FI-crackling-signed-fastboot-07863145a7.zip or cm-12.1-YOG7DAS2FI-crackling-signed-81d046434c.zip? Sorry for my noobishness!

seb5049 said:
Hey, I'm new to rooting and I'm wondering how I should go about installing this update. I assume I can't just download it OTA, so what steps should I go through to install the update? Should I use the update pack from cyanogen support (can't post link)? If so, which one? cm-12.1-YOG7DAS2FI-crackling-signed-fastboot-07863145a7.zip or cm-12.1-YOG7DAS2FI-crackling-signed-81d046434c.zip? Sorry for my noobishness!
Click to expand...
Click to collapse
Is your firmware stock? Then OTA should announce itself and install fine (unless perhaps if your phone is encrypted).

Dior DNA said:
Is your firmware stock? Then OTA should announce itself and install fine (unless perhaps if your phone is encrypted).
Click to expand...
Click to collapse
I've rooted my phone using a guide on this forum. I have also installed TWRP recovery.

seb5049 said:
I've rooted my phone using a guide on this forum. I have also installed TWRP recovery.
Click to expand...
Click to collapse
OK . you can then download the official firmware and install it. When prompted by TWRP recovery to install SU chose NO.

mermigas said:
OK . you can then download the official firmware and install it. When prompted by TWRP recovery to install SU chose NO.
Click to expand...
Click to collapse
Should I install everything in the zip? Won't that wipe all of my data?

seb5049 said:
Should I install everything in the zip? Won't that wipe all of my data?
Click to expand...
Click to collapse
The cm-12.1-YOG7DAS2FI-crackling-signed-81d046434c.zip updater-script does not seem to wipe data.
You may want to wipe dalvik and /cache first though.

Dior DNA said:
The cm-12.1-YOG7DAS2FI-crackling-signed-81d046434c.zip updater-script does not seem to wipe data.
You may want to wipe dalvik and /cache first though.
Click to expand...
Click to collapse
OK, one last thing: How do I flash the zip? Can I just put it on my phone and use TWRP to install it? Or do I have to use adb? And what's dalvik?

seb5049 said:
OK, one last thing: How do I flash the zip? Can I just put it on my phone and use TWRP to install it? Or do I have to use adb? And what's dalvik?
Click to expand...
Click to collapse
You flash using TWRP. The zip can be put on sdcard (internal or external).
The dalvik cache holds some sort of compiled java code. For minor upgrades one can perhaps leave it untouched. For major upgrades one typically wipes it. It does not hurt to wipe dalvik cache. After install, it is regenerated as part of the android upgrade.
Note that stock firware is probably unrooted so you may want to reinstall supersu update zip from twrp. Also, upgrade may or may not overwrite twrp with stock recovery so you may have to reflash twrp.
I have not done the upgrade myself (I will one day, I have no Swift, a friend has one).
Success

Dior DNA said:
You flash using TWRP. The zip can be put on sdcard (internal or external).
The dalvik cache holds some sort of compiled java code. For minor upgrades one can perhaps leave it untouched. For major upgrades one typically wipes it. It does not hurt to wipe dalvik cache. After install, it is regenerated as part of the android upgrade.
Note that stock firware is probably unrooted so you may want to reinstall supersu update zip from twrp. Also, upgrade may or may not overwrite twrp with stock recovery so you may have to reflash twrp.
I have not done the upgrade myself (I will one day, I have no Swift, a friend has one).
Success
Click to expand...
Click to collapse
Ok, I flashed the update, everything works fine except that every few seconds I get a box that says "Unfortunately, Google Play Services has stopped.". Super annoying!
EDIT: Allowing wakelocks for Google Play Services in Privacy Guard fixes it.

seb5049 said:
Ok, I flashed the update, everything works fine except that every few seconds I get a box that says "Unfortunately, Google Play Services has stopped.". Super annoying!
EDIT: Allowing wakelocks for Google Play Services in Privacy Guard fixes it.
Click to expand...
Click to collapse
@seb5049
Just for my information: did you wipe dalvik-cache?
Google Play and Google Play Services typically may get updated / changed during or right after upgrade.

Dior DNA said:
@seb5049
Just for my information: did you wipe dalvik-cache?
Google Play and Google Play Services typically may get updated change during or right after upgrade.
Click to expand...
Click to collapse
Yeah, I did. By the way, I disabled the permissions again, but everything's fine now.

On CM13, I just flashed supersu via TWRP, please help

I'm new to CM13 and I noticed I didn't have root so I went into TWRP and flashed superSU.
The phone booted up fine, I just noticed I wasn't supposed to do this!!
I DON'T have a backup of my current build.
Can anyone suggest what I should do here before something bad happens?

oshax said:
I'm new to CM13 and I noticed I didn't have root so I went into TWRP and flashed superSU.
The phone booted up fine, I just noticed I wasn't supposed to do this!!
I DON'T have a backup of my current build.
Can anyone suggest what I should do here before something bad happens?
Click to expand...
Click to collapse
Hi, I think you could simply reflash your ROM and GAPPS.
That should do it I believe.

oshax said:
I'm new to CM13 and I noticed I didn't have root so I went into TWRP and flashed superSU.
The phone booted up fine, I just noticed I wasn't supposed to do this!!
I DON'T have a backup of my current build.
Can anyone suggest what I should do here before something bad happens?
Click to expand...
Click to collapse
What's the issue? You can flash SuperSU if you'd like root access through the SuperSU app. Doesn't make a difference if root is already built into the ROM, if that's what you're worried about.

kipue said:
Hi, I think you could simply reflash your ROM and GAPPS.
That should do it I believe.
Click to expand...
Click to collapse
Yeah I was thinking the same thing. Just dirty flash ROM and GAPPS, just like if I was upgrading and should retain data but not supersu root. Thanks for the response.
dpryor88 said:
What's the issue? You can flash SuperSU if you'd like root access through the SuperSU app. Doesn't make a difference if root is already built into the ROM, if that's what you're worried about.
Click to expand...
Click to collapse
I'm worried because of these instructions from CM Forums:
http://www.cyanogenmods.org/forums/topic/root-android-using-twrp-recovery-install-supersu/
ROOT ACCESS FOR CYANOGENMOD ROM USERS AND ROMS BASED ON CYANOGENMOD:
If you install SuperSU on a CyanogenMod ROM or any other ROM built on top of CyanogenMod such as Resurrection Remix ROM or any other ROM then then there is a high probability that you will end up with bootloop. CyanogenMod has built-in “su” binary which is just hidden and needs to be accessible by a simple guide.
Click to expand...
Click to collapse

oshax said:
Yeah I was thinking the same thing. Just dirty flash ROM and GAPPS, just like if I was upgrading and should retain data but not supersu root. Thanks for the response.
I'm worried because of these instructions from CM Forums:
http://www.cyanogenmods.org/forums/topic/root-android-using-twrp-recovery-install-supersu/
Click to expand...
Click to collapse
Never happened to me on any phone using a cm based ROM. Seems like this info is outdated.
Anyway, yeah just flash the cm ROM and then Gapps. It'll get rid of su root

oshax said:
Yeah I was thinking the same thing. Just dirty flash ROM and GAPPS, just mods.org/forums/topic/root-android-using-twrp-recovery-install-supersu/[/URL]
Click to expand...
Click to collapse
Well I think if you had no bootloader yet, you'd be safe

Home unto / finger print broken

Hi,
I have searched for an answer but could not find anything as a solution.
My home button works on neither viper nor leedroid; it simply does not respond. Is there a known solution? I reflashing does not work either.

If you are on the N versions of either of those roms it depends on what Firmware you have installed. If you are on M Firmware you need to install the fix for Viper from the hub, unless they changed that on the newest version. As for Lee's rom during the aroma installer it will ask which Firmware you are on and it should work from there if you select the correct setting.

lightweaponx said:
If you are on the N versions of either of those roms it depends on what Firmware you have installed. If you are on M Firmware you need to install the fix for Viper from the hub, unless they changed that on the newest version. As for Lee's rom during the aroma installer it will ask which Firmware you are on and it should work from there if you select the correct setting.
Click to expand...
Click to collapse
Thank you for the reply! I installed leedroid with the N based firmware. Can you tell me how to proceed without losing my apps and data?

RootMaster2016 said:
Thank you for the reply! I installed leedroid with the N based firmware. Can you tell me how to proceed without losing my apps and data?
Click to expand...
Click to collapse
You could use a tool like Titanium Backup and make sure it is on your SD card or move it over to a PC after the backup. You could also try a dirty flash depending on what ROM you are on right now.

lightweaponx said:
You could use a tool like Titanium Backup and make sure it is on your SD card or move it over to a PC after the backup. You could also try a dirty flash depending on what ROM you are on right now.
Click to expand...
Click to collapse
OK I'm on leedroid beta 2 right now. So basically reflash with no wipe?

RootMaster2016 said:
OK I'm on leedroid beta 2 right now. So basically reflash with no wipe?
Click to expand...
Click to collapse
That should do the trick but it would still be wise to have some sort of backup somewhere.

lightweaponx said:
That should do the trick but it would still be wise to have some sort of backup somewhere.
Click to expand...
Click to collapse
Ah of course forgot to mention that. Should I select anything special in the options menu during installation? Thanks

lightweaponx said:
That should do the trick but it would still be wise to have some sort of backup somewhere.
Click to expand...
Click to collapse
Dirty flash did not work

At that point it sounds like you might need to do a full wipe. There should be some good instructions in that thread.

when it asks you for the firmware you are using during the installer, you need to choose the old one...else your fingerprint is broken.
You are obviously choosing the wrong option during installtion.

Not able to install any custom ROM in OnePlus 5T

Hello Guys,
I need help regarding the issue that I'm facing. What happens is ROM get installed properly without any error but not boots up. It get stuck at boot animation screen. I tried lots of ROMs including DOT OS, C droid, AICP, TOXYC OS. Facing the same issue to all of the ROMs. I followed the below steps to install.
1. Download the ROM file
2. Download the GApps.
3. Booted into TWRP Recovery Mode.
4. Backup done (optional)
5. Wipe all the 4 partitions except Internal Storage.
6. Then install the ROM file and followed by GApps
7. Installation successful for both ROM & GApps.
8. Reboot.
I tried installing the ROM only but result was same.
I'm currently running on Oxygen OS Open Beta 10.
PLEASE HELP. THANKS IN ADVANCE.

Which TWRP do you use? Personally, I recommend this one by codeworkx: https://sourceforge.net/projects/ch....1-0-20180309-codeworkx-dumpling.img/download
Some roms require you to be decrypted; others don't. Most roms require the latest firmware (5.1.3) to be flashed before the rom, gapps, etc. Read the installation instructions carefully. Use the recommended firmware and gapps package linked to the rom. Before you start flashing roms, you should wipe your phone in fastboot mode: fastboot format userdata. This will wipe your phone clean; all your data will be gone. So, backup all your data to your PC before proceeding. After format, reboot directly to TWRP and move your firmware, rom, gapps, etc. to internal storage; follow the flash order and procedures exactly as outlined for the rom you want to try.

I tried installing latest TWRP (3.2.1-2) for my OnePlus 5T but no luck. Please suggest.

KDPalekar said:
I tried installing latest TWRP (3.2.1-2) for my OnePlus 5T but no luck. Please suggest.
Click to expand...
Click to collapse
The link to a working TWRP is in the post above; it's not the latest or official TWRP, but it works. Also, please read through this thread if you haven't already: https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592.

Did you try to format data (after wiping the partitions) ?

bud7dha said:
The link to a working TWRP is in the post above; it's not the latest or official TWRP, but it works. Also, please read through this thread if you haven't already: https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592.
Click to expand...
Click to collapse
Read the whole instructions and installed it but no luck .

Zark0s said:
Did you try to format data (after wiping the partitions) ?
Click to expand...
Click to collapse
sorry.. i didn't get u.

KDPalekar said:
sorry.. i didn't get u.
Click to expand...
Click to collapse
In twrp, when you go in the wipe tab, there is a "format data" button. It will wipe the data and internal storage partitions and remove encryption. But don't worry, depending of the ROM you flash it will encrypt again.

Zark0s said:
In twrp, when you go in the wipe tab, there is a "format data" button. It will wipe the data partition and remove encryption. But don't worry, depending of the ROM you flash it will encrypt again.
Click to expand...
Click to collapse
so do i need to do that as well?

KDPalekar said:
so do i need to do that as well?
Click to expand...
Click to collapse
I format data everytime I do a clean flash lol, so yeah just give a try and let us know if it works ^^

Hi,
It worked. I format the data and install the clean flash. Thanks a lot. One more thing can u please suggest custom ROM with ANDROID P notification panel.

KDPalekar said:
Hi,
It worked. I format the data and install the clean flash. Thanks a lot. One more thing can u please suggest custom ROM with ANDROID P notification panel.
Click to expand...
Click to collapse
Idk if a custom rom exists with that feature but there is a xposed module which does that and works on any custom rom (aosp 8.1 based at least) : https://forum.xda-developers.com/xposed/modules/xposed-android-p-ify-features-t3764556

Zark0s said:
Idk if a custom rom exists with that feature but there is a xposed module which does that and works on any custom rom (aosp 8.1 based at least) : https://forum.xda-developers.com/xposed/modules/xposed-android-p-ify-features-t3764556
Click to expand...
Click to collapse
I installed the Lineage OS, rooted, installed the xposed module, installed the android P fy module but still I'm not getting the exact look like android p notification panel. Can you suggest me ROM that works fine with Android P-fy module to get the exact Android p notification panel.
Please find the attachment. This is what I'm getting with Lineage OS.

KDPalekar said:
I installed the Lineage OS, rooted, installed the xposed module, installed the android P fy module but still I'm not getting the exact look like android p notification panel. Can you suggest me ROM that works fine with Android P-fy module to get the exact Android p notification panel.
Please find the attachment. This is what I'm getting with Lineage OS.
Click to expand...
Click to collapse
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.

Zark0s said:
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.
Click to expand...
Click to collapse
I tried AOSP Extended before a week ago. Everything was working fine except headphone Jack. Sound was not coming in my earphones. Sound from speaker grill was coming, even I tried with connecting to Bluetooth speaker, that's also working fine. The only issue I had with that headphone Jack.
Please suggest if you have any solution for that then I'll surely try it again.
Thanks

Zark0s said:
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.
Click to expand...
Click to collapse
Oh. How unlucky I'm. I just checked the headphone Jack with this ROM. Here also headphone Jack is not working. This is very unlucky. Do have any solution for this?

KDPalekar said:
Oh. How unlucky I'm. I just checked the headphone Jack with this ROM. Here also headphone Jack is not working. This is very unlucky. Do have any solution for this?
Click to expand...
Click to collapse
I think you didn't flash the latest firmware available (5.1.3), which you can find here :
https://forum.xda-developers.com/showthread.php?t=3728665

Zark0s said:
I think you didn't flash the latest firmware available (5.1.3), which you can find here :
https://forum.xda-developers.com/showthread.php?t=3728665
Click to expand...
Click to collapse
Thanks a lot Buddy. Flashed the latest firmware and now headphone Jack is live more. Thank you do much Buddy.

[Request] Oxygen os port from one plus 6, and Zenfone rom port.

I used one plus 6 ported rom for whyred it has notch issue, how can fill that space, and now using zenfone 5z's rom it has the same problem, how to kill that notch and use that space for notification bar.

Vishwagaine said:
I used one plus 6 ported rom for whyred it has notch issue, how can fill that space, and now using zenfone 5z's rom it has the same problem, how to kill that notch and use that space for notification bar.
Click to expand...
Click to collapse
Use one plus 5t rom then. Go to oxygen os whyred thread. You can find one plus 5t build there. Its more stable than one plus 6 build

jokerpappu said:
Use one plus 5t rom then. Go to oxygen os whyred thread. You can find one plus 5t build there. Its more stable than one plus 6 build
Click to expand...
Click to collapse
Has it faceunlock?

Vishwagaine said:
Has it faceunlock?
Click to expand...
Click to collapse
I think someone said there is. Not sure as i did not used it and i am not on that rom currently

Can you please share the thread link
And whats the android version

Vishwagaine said:
Can you please share the thread link
And whats the android version
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-5-pro/how-to/op5t-op6-oxygenos-t3878721

jokerpappu said:
https://forum.xda-developers.com/redmi-note-5-pro/how-to/op5t-op6-oxygenos-t3878721
Click to expand...
Click to collapse
This rom has same notch problem.

Vishwagaine said:
This rom has same notch problem.
Click to expand...
Click to collapse
This rom is based on 5t. And 5t does not have notch. Try and see for yourself. You are getting the wrong idea about that rom

jokerpappu said:
This rom is based on 5t. And 5t does not have notch. Try and see for yourself. You are getting the wrong idea about that rom
Click to expand...
Click to collapse
Watch the bug section, the last point says notch, what its mean??
And in title it says, OP5T/OP6 and maybe OP6 has the bloody ugly notch

Vishwagaine said:
Watch the bug section, the last point says notch, what its mean??
And in title it says, OP5T/OP6 and maybe OP6 has the bloody ugly notch
Click to expand...
Click to collapse
I am trying to help you if you don't believe me not my prob. When i used it i did not have any notch problem. Believe it or not your choice. I'm done here

Look at what the dev who ported the rom it self has said. Welcome to anti notch club. I hope you get that

jokerpappu said:
I am trying to help you if you don't believe me not my prob. When i used it i did not have any notch problem. Believe it or not your choice. I'm done here
Click to expand...
Click to collapse
Sorry... I got it i read the thread...
One last request can you please tell step by step instruction to install this rom, in that thread its so much to take.
They are saying about custom vender, Voldpatch etc...
What these are??
Please steps to install this rom

Vishwagaine said:
Sorry... I got it i read the thread...
One last request can you please tell step by step instruction to install this rom, in that thread its so much to take.
They are saying about custom vender, Voldpatch etc...
What these are??
Please steps to install this rom
Click to expand...
Click to collapse
Wipe data cache system. Flash the rom then boot into the system and go through the setup wizard.
After you have set everything. Press power button then press reboot. Wait till the screen turns off and after it vibrates keep pressing the power button until the phone reboots.
Then after the phone reboots reboot and go to recovery. Mount system manually. I hope you know how to do that. Then only flash vold patch and everything is done. Now you have working reboor power off all command working and you are set
Plz do read what instructions i gave carefully and do it step by step ok. Hope this helps you

jokerpappu said:
Look at what the dev who ported the rom it self has said. Welcome to anti notch club. I hope you get that
Click to expand...
Click to collapse
Sorry ...

jokerpappu said:
Wipe data cache system. Flash the rom then boot into the system and go through the setup wizard.
After you have set everything. Press power button then press reboot. Wait till the screen turns off and after it vibrates keep pressing the power button until the phone reboots.
Then after the phone reboots reboot and go to recovery. Mount system manually. I hope you know how to do that. Then only flash vold patch and everything is done. Now you have working reboor power off all command working and you are set
Plz do read what instructions i gave carefully and do it step by step ok. Hope this helps you
Click to expand...
Click to collapse
Thanks you so much im downloading the rom...
What about vender?? Don't i have to wipe vender??

jokerpappu said:
Wipe data cache system. Flash the rom then boot into the system and go through the setup wizard.
After you have set everything. Press power button then press reboot. Wait till the screen turns off and after it vibrates keep pressing the power button until the phone reboots.
Then after the phone reboots reboot and go to recovery. Mount system manually. I hope you know how to do that. Then only flash vold patch and everything is done. Now you have working reboor power off all command working and you are set
Plz do read what instructions i gave carefully and do it step by step ok. Hope this helps you
Click to expand...
Click to collapse
Vold patch link please

Vishwagaine said:
Thanks you so much im downloading the rom...
What about vender?? Don't i have to wipe vender??
Click to expand...
Click to collapse
Vishwagaine said:
Vold patch link please
Click to expand...
Click to collapse
Here is the vold patch.
No need to flash vendor separately. Its included in the rom itself in this version

jokerpappu said:
Here is the vold patch.
No need to flash vendor separately. Its included in the rom itself in this version
Click to expand...
Click to collapse
Shouldn't i wipe the vender??
I visually wipe chche dalvike vender data before installing any rom

Vishwagaine said:
Shouldn't i wipe the vender??
I visually wipe chche dalvike vender data before installing any rom
Click to expand...
Click to collapse
Yes you can wipe the vendor

jokerpappu said:
Yes you can wipe the vendor
Click to expand...
Click to collapse
Done ..
Face unlock not working