Related
I have been trying to flash oxygen os open beta 9 on my oneplus 3
first i tried the official steps mentioned on the oneplus site
I flashed stock oxygen os recovery
but when i boot into recovery mode it asks for a pattern which upon entering does not decrypt
I then flashed official TWRP and tried to flash the full open beta .zip file but it shows this package is for oneplus 3 this is a ""
also if i try to flash the modified TWRP 28 then also it cannot decrypt the phone
I would prefer not to format the phone if at all possible
aaditya98 said:
I have been trying to flash oxygen os open beta 9 on my oneplus 3
first i tried the official steps mentioned on the oneplus site
I flashed stock oxygen os recovery
but when i boot into recovery mode it asks for a pattern which upon entering does not decrypt
I then flashed official TWRP and tried to flash the full open beta .zip file but it shows this package is for oneplus 3 this is a ""
also if i try to flash the modified TWRP 28 then also it cannot decrypt the phone
Click to expand...
Click to collapse
Hi, I think you should try to format data. Probabby via fastboot, then install TWRP.
Not sure which are the correct commands for the full format, so have a look around or someone else will help.
Otherwise there is the unbrick guide here in the forums to try.
I'm having a similar issue. So any advice would be great. Just updated to most recent unofficial TWRP (having been on a previous version). Now when entering my pin to decrypt it is not accepted. Would prefer not to have to format data.
aaditya98 said:
I have been trying to flash oxygen os open beta 9 on my oneplus 3
first i tried the official steps mentioned on the oneplus site
I flashed stock oxygen os recovery
but when i boot into recovery mode it asks for a pattern which upon entering does not decrypt
I then flashed official TWRP and tried to flash the full open beta .zip file but it shows this package is for oneplus 3 this is a ""
also if i try to flash the modified TWRP 28 then also it cannot decrypt the phone
I would prefer not to format the phone if at all possible
Click to expand...
Click to collapse
unfortunately no choice other than wiping everything.....
antisoma said:
I'm having a similar issue. So any advice would be great. Just updated to most recent unofficial TWRP (having been on a previous version). Now when entering my pin to decrypt it is not accepted. Would prefer not to have to format data.
Click to expand...
Click to collapse
I believe the decrypt is a known issue with TWRP and OB8/OB9 with F2FS /data partition. I don't think there's a work around at this time without formatting /data and rooting to prevent encryption.
Hw4ng3r said:
I believe the decrypt is a known issue with TWRP and OB8/OB9 with F2FS /data partition. I don't think there's a work around at this time without formatting /data and rooting to prevent encryption.
Click to expand...
Click to collapse
So do you think there would be workaround in future?
0xelectron said:
So do you think there would be workaround in future?
Click to expand...
Click to collapse
Hopefully there will be, but it doesn't look promising right now. @eng.stk is the one that was modding the TWRP, but has since stopped doing TWRP dev.
kipue said:
Hi, I think you should try to format data. Probabby via fastboot, then install TWRP.
Not sure which are the correct commands for the full format, so have a look around or someone else will help.
Otherwise there is the unbrick guide here in the forums to try.
Click to expand...
Click to collapse
But I'm on official 3.2.8 with ext4 partition
Do you guy know where to get the stock recovery for openbeta 9? I downloaded somewhere a file recovery_OBT8N.img, but it still shows dm-verity issue.
nqk said:
Do you guy know where to get the stock recovery for openbeta 9? I downloaded somewhere a file recovery_OBT8N.img, but it still shows dm-verity issue.
Click to expand...
Click to collapse
Fastboot Format system and data
Then fastboot flash stockrecovery
Then boot to system
Sideload rom
Then fastboot boot twrp28
Then wipe data and install superuser in one go
candiesdoodle said:
Fastboot Format system and data
Click to expand...
Click to collapse
you mean: fastboot erase userdata?
Btw, I just ignore the dm-verity message to enter stock recovery, and do adb sideload openbeta9.zip and when it boots up again, the dm-verity message is no longer there.
I would try to format (erase userdata) data and flash the modded twrp.
nqk said:
you mean: fastboot erase userdata?
Btw, I just ignore the dm-verity message to enter stock recovery, and do adb sideload openbeta9.zip and when it boots up again, the dm-verity message is no longer there.
I would try to format (erase userdata) data and flash the modded twrp.
Click to expand...
Click to collapse
Yeah fastboot Format userdata
But since you don't have the dm-verity you can skip the fastboot Format. Boot into the modd twrp and when it asks for password, hit cancel and then format data (you will have to type 'yes').
Then flash SuperSU or superuser in the same session without booting. This will ensure dm-verity doesn't come up again as it will start in enforcing mode, thanks to SuperSU/superuser.
You may be able to flash twrp afterwards but I haven't tried it.
i flashed miui 9.3.28 and then booted twrp , but it was asking for password so i went to wipe and repaired data using ext4 ,and then procceded to wipe data, vendor, cache, system and now im stck with no os and i cant use adb sideload to install a rom please help :crying: :crying: :crying: :crying: :crying: :crying: :crying:
Reboot into fastboot(keep pressed power and vol - buttons until you plug cable to pc otherwise it can start rebooting system) and flash latest fastboot miui(you need to unzip it first): http://en.miui.com/a-234.html via XiaoMiFlash tool with clean all option. If you can't see your device in tool press refresh in MiFlash tool you have also Driver section check this. Another option is to install google latest_usb_driver via device menager(right click on your device->update-driver->browse pc -> and select usb driver.
I got the exact same problem after flashing the same beta build. Nothing worked for me so I had to flash the fastboot image and roll back the stable channel.
Op next time don't wipe vendor partition.In your case you should get recovery with supports MIUI on androind 9 and if ou had encrypted data you should format the data. Here you have similar situation: https://forum.xda-developers.com/redmi-note-5-pro/how-to/recovery-pie-update-miui10-t3916963 (I didn't try this one)
Remember For decryption it only needs to format data partition only.
How will it boot if you wiped system as well as vendor partition.
If you can get in recovery just flash the update file 9.3.28 and u r ready to go.
I did all that and formatted the data partition which was decrypted afterwards. The problem is that internal storage gets re-encrypted after I boot to system.
HeRoKaNe said:
I did all that and formatted the data partition which was decrypted afterwards. The problem is that internal storage gets re-encrypted after I boot to system.
Click to expand...
Click to collapse
Flash lazyflasher-no-verity-opt-encrypt after flashing custom ROM and then decrypt. Try if it's works.
Letrix said:
Flash lazyflasher-no-verity-opt-encrypt after flashing custom ROM and then decrypt. Try if it's works.
Click to expand...
Click to collapse
I tried that but every time the installation fails with ERROR: 1.
HELPPPP
I was on Masik X3.7
I want to install to another rom
so , I booted into TWRP and formatted data.
from then my laptop not recognizing device.
Also, not able to boot in to Fastboot mode !
it shows charging sign in TWRP.
rasik107 said:
HELPPPP
I was on Masik X3.7
I want to install to another rom
so , I booted into TWRP and formatted data.
from then my laptop not recognizing device.
Also, not able to boot in to Fastboot mode !
it shows charging sign in TWRP.
Click to expand...
Click to collapse
same problem here, please someone help!
ltv07 said:
same problem here, please someone help!
Click to expand...
Click to collapse
actually it was booted in fastboot mode only.
just that logo was not visible.
so u can connect device and try to run "fastboot devices" to check if its connected !
ltv07 said:
same problem here, please someone help!
Click to expand...
Click to collapse
Resolved installing older twrp version
ltv07 said:
Resolved installing older twrp version
Click to expand...
Click to collapse
Can you give the version of twrp which worked in Pie.
Regarding your problems
Copy any rom to a micro sd card and flash it through twrp if done ur done
Try using OrangeFox Recovery, I had the same issue ADB & MTP connection with TWRP for Whyred.
varunsngh786 said:
Copy any rom to a micro sd card and flash it through twrp if done ur done
Click to expand...
Click to collapse
rockstar1997 said:
Try using OrangeFox Recovery, I had the same issue ADB & MTP connection with TWRP for Whyred.
Click to expand...
Click to collapse
Thanks. My main problem was that mtp driver of Miui was wrong. And the decrypt error was solved by Redwolf recovery. i have yet to try OrangeFox one.
rockstar1997 said:
Try using OrangeFox Recovery, I had the same issue ADB & MTP connection with TWRP for Whyred.
Click to expand...
Click to collapse
You're a rockstar! I was also having the same problem and orangefox fixed it!
Thanks mate!
Ive already flashed a few phones, but this is the first time that Ive got CMD error "FAILED (remote: (recovery_a) No such partition)". So I booted twrp.img, falshed ArrowOS and TWRP from within TWRP and it said something about Slot A and B, which I dont understand ... some guide also said to Format Data, which I did, and then I just could boot into TWRP in Slot A, and no OS on Slot B, which rebooted me into Slot A. I couldnt find any info about this and I dont know what to do. Anybody knows how to properly flash TWRP and custom ROMs please ?
Start fresh by flashing stock MIUI rom through fastboot and proceed from there
1 Boot once into MIUI and reboot into fastboot
2 fastboot boot twrp.img (from platform tools folder)
3 Flash custom rom like ArrowsOS with inject twrp option checked
4 Reboot recovery
5 Format Data by typing "yes"
6 Reboot to system
7 Done
Follow the TWRP install instructions by fastboot boot TWRP.img
advanced, install TWRP
It should then reboot and TWRP will be installed
Then proceed as above by flashing a ROM e.g ArrowOS with TWRP inject.
Then reboot TWRP and wipe data
Use "fastboot boot TWRP.img" to temporarily boot TWRP.
You can install TWRP by using "Install to Ramdisk" inside TWRP and selecting TWRP.img
Cvenda said:
Ive already flashed a few phones, but this is the first time that Ive got CMD error "FAILED (remote: (recovery_a) No such partition)". So I booted twrp.img, falshed ArrowOS and TWRP from within TWRP and it said something about Slot A and B, which I dont understand ... some guide also said to Format Data, which I did, and then I just could boot into TWRP in Slot A, and no OS on Slot B, which rebooted me into Slot A. I couldnt find any info about this and I dont know what to do. Anybody knows how to properly flash TWRP and custom ROMs please ?
Click to expand...
Click to collapse
Did you manage to fix it? I got into the same problem, I could only fix it downloading the most updated version of adb/fastboot. I don't remember where I downloaded it, but it was what solved this problem for me.
pedrowood said:
Did you manage to fix it? I got into the same problem, I could only fix it downloading the most updated version of adb/fastboot. I don't remember where I downloaded it, but it was what solved this problem for me.
Click to expand...
Click to collapse
well Iam still confused about that Slot A/B thing, but since Ive probably bricked my phone, I flashed the fastboot ROM through MiFlasher and I havent tried flashing TWRP or custom ROM since, there are some things I really like about MIUI so Iam gonna see which ROM Iam gonna choose in the future
Cvenda said:
well Iam still confused about that Slot A/B thing, but since Ive probably bricked my phone, I flashed the fastboot ROM through MiFlasher and I havent tried flashing TWRP or custom ROM since, there are some things I really like about MIUI so Iam gonna see which ROM Iam gonna choose in the future
Click to expand...
Click to collapse
Slot A and B refer to Project Treble, where there are 2 separate partitions. 1 for OEM like Samsung and other for core Android OS. That way Google can update the OS partition with security updates without having to wait for Samsung to implement those security update into their version of Android, as was the case before Galaxy S9. Needless to say, this way security updates get pushed out way faster, because there is no need to wait an entire year (I'm looking at you Samsung) for OEM to finally implement it. Hope this clears things up for you.
Milan-XDA said:
Slot A and B refer to Project Treble, where there are 2 separate partitions. 1 for OEM like Samsung and other for core Android OS. That way Google can update the OS partition with security updates without having to wait for Samsung to implement those security update into their version of Android, as was the case before Galaxy S9. Needless to say, this way security updates get pushed out way faster, because there is no need to wait an entire year (I'm looking at you Samsung) for OEM to finally implement it. Hope this clears things up for you.
Click to expand...
Click to collapse
reason for slots
Robert314 said:
Follow the TWRP install instructions by fastboot boot TWRP.img
advanced, install TWRP
It should then reboot and TWRP will be installed
Then proceed as above by flashing a ROM e.g ArrowOS with TWRP inject.
Then reboot TWRP and wipe data
Click to expand...
Click to collapse
there is a slight problem with this ... I cannot upload any file to the phone, because I have wiped Data, so there is no folder that I can access from the PC, so I can only sideload .zip files, and most of the .zip files just doesnt work for some reason, only ArrowOS, but not the PixelExtended, nor CrDroid ... I cannot even sideload TWRP.img to install it into ramdisk
EDIT: after sideloading ArrowOS and booting TWRP using "fastboot boot twrp.img", I can access internal storage, so I uploaded twrp.img into /sdcard/Download folder, installed it into ramdisk, rebooted to Recovery and now successfully flashing CrDroid ROM that I uploaded to /sdcard/Download
Cvenda said:
there is a slight problem with this ... I cannot upload any file to the phone, because I have wiped Data, so there is no folder that I can access from the PC, so I can only sideload .zip files, and most of the .zip files just doesnt work for some reason, only ArrowOS, but not the PixelExtended, nor CrDroid ... I cannot even sideload TWRP.img to install it into ramdisk
Click to expand...
Click to collapse
You can adb transfer files in TWRP. You could also use a USB stick connected via OTG cable
Robert314 said:
You can adb transfer files in TWRP. You could also use a USB stick connected via OTG cable
Click to expand...
Click to collapse
its behaving so randomly ... I often get error kInstallDeviceOpenError, even tho I successfully installed that ROM at least one time ... I dont know which slot (A/B) to use and when ... now I have ArrowOS in slot A and CrDroid ins lot B, and I cannot flash anything from booted TWRP.img ... Iam gonna try to install TWRP into ramdisk again from USB OTG
Cvenda said:
its behaving so randomly ... I often get error kInstallDeviceOpenError, even tho I successfully installed that ROM at least one time ... I dont know which slot (A/B) to use and when ... now I have ArrowOS in slot A and CrDroid ins lot B, and I cannot flash anything from booted TWRP.img ... Iam gonna try to install TWRP into ramdisk again from USB OTG
Click to expand...
Click to collapse
In order to wipe the super partition (both A/B and data) flash Xiaomi.eu and then wipe data
Robert314 said:
In order to wipe the super partition (both A/B and data) flash Xiaomi.eu and then wipe data
Click to expand...
Click to collapse
how exactly should I proceed ? flash fastboot stock ROM with MiFlasher, boot into bootloader, boot twrp.img, wipe data, and then what ? which slot do I choose ? should I install TWRP into ramdisk, reboot into recovery and then flash custom ROM ?
Cvenda said:
how exactly should I proceed ? flash fastboot stock ROM with MiFlasher, boot into bootloader, boot twrp.img, wipe data, and then what ? which slot do I choose ? should I install TWRP into ramdisk, reboot into recovery and then flash custom ROM ?
Click to expand...
Click to collapse
ROM: xiaomifirmwareupdater.com/archive/miui/alioth/
Mi Flash: xiaomiflashtool.com
ADB & Fastboot: developer.android.com/studio/releases/platform-tools
TWRP: https://forum.xda-developers.com/f/xiaomi-poco-f3-xiaomi-mi-11x-redmi-k40.12161/?prefix_id=33
Clean Install of Xiaomi.eu ROM:
Flash Stock ROM with Mi Flash
Boot System once (to create /data)
Boot TWRP from Nebrassy or @Vasishoth
Flash Xiaomi.eu ROM
Format Data & Dalvik Cache
dreamytom said:
ROM: xiaomifirmwareupdater.com/archive/miui/alioth/
Mi Flash: xiaomiflashtool.com
ADB & Fastboot: developer.android.com/studio/releases/platform-tools
TWRP: https://forum.xda-developers.com/f/xiaomi-poco-f3-xiaomi-mi-11x-redmi-k40.12161/?prefix_id=33
Clean Install of Xiaomi.eu ROM:
Flash Stock ROM with Mi Flash
Boot System once (to create /data)
Boot TWRP from Nebrassy or @Vasishoth
Flash Xiaomi.eu ROM
Format Data & Dalvik Cache
Click to expand...
Click to collapse
in case of flashing custom ROM, are the steps same ? just instead of Xiaomi.eu ROM I flash PE, or CrDroid ? and should I format data and dalvik also or wipe data (that option where I need to type YES) ? Ive found official guide for flashing CrDroid, but Iam stuck st booting animation for 30 minutes
Cvenda said:
in case of flashing custom ROM, are the steps same ? just instead of Xiaomi.eu ROM I flash PE, or CrDroid ? and should I format data and dalvik also or wipe data (that option where I need to type YES) ? Ive found official guide for flashing CrDroid, but Iam stuck st booting animation for 30 minutes
Click to expand...
Click to collapse
Go into TWRP and press wipe then format data (type yes).
regedit12345 said:
Go into TWRP and press wipe then format data (type yes).
Click to expand...
Click to collapse
I have stock rom in slot A (bootable and working) and custom rom in slot B (stuck at booting animation), and I should format data while being in slot A right ?
Cvenda said:
I have stock rom in slot A (bootable and working) and custom rom in slot B (stuck at booting animation), and I should format data while being in slot A right ?
Click to expand...
Click to collapse
Doesn't matter. Just select format data > yes > reboot to system
regedit12345 said:
Doesn't matter. Just select format data > yes > reboot to system
Click to expand...
Click to collapse
sooo what seemes to work for me now is, that I formated data, then flashed PE ROM from OTG and booted into it without any problems
my 12X system storage Corrupted/deleted after installing TWRP, I'm New A/B partition system. now I can't access the storage even flashing with MI Flash tool not work. PLz plz someone expert help me out. how to resolve it ? will be so grateful.
ajoy25 said:
my 12X system storage Corrupted/deleted after installing TWRP, I'm New A/B partition system. now I can't access the storage even flashing with MI Flash tool not work. PLz plz someone expert help me out. how to resolve it ? will be so grateful.
Click to expand...
Click to collapse
Check here that everything has been done correctly
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
ajoy25 said:
my 12X system storage Corrupted/deleted after installing TWRP, I'm New A/B partition system. now I can't access the storage even flashing with MI Flash tool not work. PLz plz someone expert help me out. how to resolve it ? will be so grateful.
Click to expand...
Click to collapse
How did you install twrp? Did you flash the twrp to boot partition? If yes, you need to find out which system you had installed and then flash the suiting boot.img.
Background: In A/B partition scheme, recovery is part of boot.img. Boot.img needs to be patched by twrp. So normally you need to boot twrp by typing "fastboot boot twrp.img" and then, when twrp is booted, go to advanced and press "flash current twrp"
Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.
Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.
ajoy25 said:
Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.
Click to expand...
Click to collapse
Ok, you already deleted data. Try to format data via fastboot. Use "fastboot -w" and retry!
ajoy25 said:
Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.
Click to expand...
Click to collapse
Maybe start one thing at a time.
Problem with twrp
Try flashing this Fastboot rom
Download the rom/extract it/open the folder /use first install.bat with the phone in Fastboot mode
https://sourceforge.net/projects/xi...13.0.5.0.SLDCNXM_v13-12-fastboot.zip/download
then install the TWRP and update the rom via OTA (do not put any security on the lock screen).
BOOT VERSION
Installation:
Phone in fastboot mode
Cmd:
fastboot boot twrp.img
Power shell
./fastboot boot twrp.img
then in Twrp go to Advanced -> flash current TWRP->reboot TWRP
If that doesn't work/see post https://forum.xda-developers.com/t/...need-urgent-help-please.4491461/post-87424405
NOSS8 said:
Maybe start one thing at a time.
Problem with twrp
Try flashing this Fastboot rom
Download the rom/extract it/open the folder /use first install.bat with the phone in Fastboot mode
https://sourceforge.net/projects/xi...13.0.5.0.SLDCNXM_v13-12-fastboot.zip/download
then install the TWRP and update the rom via OTA (do not put any security on the lock screen).
BOOT VERSION
Installation:
Phone in fastboot mode
Cmd:
fastboot boot twrp.img
Power shell
./fastboot boot twrp.img
then in Twrp go to Advanced -> flash current TWRP->reboot TWRP
If that doesn't work/see post https://forum.xda-developers.com/t/...need-urgent-help-please.4491461/post-87424405
Click to expand...
Click to collapse
Thank you for ur kind support. I have managed to flash it with mi flasher & rooted it with masgisk.
Hello,
I recently tried to flash a custom rom on my poco f3, but I couldn't install twrp, because I didn't have the option to install it when i boot to it.
So I followed some instructions online and formated data partition to ext2, and then back to ext4. Now I can't copy any files to the phone storage and can't do anything else.
I can reboot to fastboot, and I can boot to twrp, but it's pretty much useless because I can't sideload anything, and can't install twrp anyways.
Did I do something wrong? Is it easily fixable?
Thanks in advance.
f2fs?
aIecxs said:
f2fs?
Click to expand...
Click to collapse
I don't understand what you mean, sorry. I'm newbie.
Should I format the data partition to f2fs？
Idk depends on ROM. MIUI is f2fs
aIecxs said:
Idk depends on ROM. MIUI is f2fs
Click to expand...
Click to collapse
Oh. I tried a different twrp version and could install it on the phone. Now flashed crDroid and it said my system was broke so had to factory reset. It is working now. Thanks.
But now I can only access the crDroid recovery, how can I install back twrp? if I try to fastboot boot twrp.img it simply reboots back to system.
try to boot TWRP from other slot maybe? (don't forget to switch back)
Code:
fastboot --set-active=other
fastboot boot twrp.img
if that fails just flash TWRP into vendor_boot partition, and restore vendor_boot.img from crDroid right after