LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
SCREENSHOTS
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
This thread is not the right place to discuss about mods/addons.
HOW TO INSTALL LINEAGEOS
- Make sure your phone was running OxygenOS 5.1.4 at least once
- Remove custom encryption pins/passwords else decryption will fail!
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
HOW TO UPDATE LINEAGEOS
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Reboot
HOW TO UPGRADE LINEAGEOS FROM LOWER VERSION
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Update the Google Apps addon package if it was installed on your previous LineageOS version.
- Reboot
DOWNLOADS
LineageOS 17.0: Official | Unofficial
Firmware: https://sourceforge.net/projects/cheeseburgerdumplings/files/17.1/cheeseburger/firmware/
Migration-Tools: https://androidfilehost.com/?w=files&flid=254680 (Unofficial->Official, Official->Unofficial)
SU-Addon: Official | Unofficial
Google Apps: http://opengapps.org/ | BETA
TWRP: TWRP by codeworkx | Official
DEVELOPER RESOURCES
https://github.com/LineageOS/android_device_oneplus_cheeseburger
https://github.com/LineageOS/android_device_oneplus_msm8998-common
https://github.com/LineageOS/android_kernel_oneplus_msm8998
HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/
TELEGRAM GROUP
https://t.me/joinchat/GQS-ghNaf-1YMpjSbh_puQ
I returned back to stock yesterday. I'll sit here and wait 'till this ROM will be more stable. But why haven't you merged 4.4.192?
thankss )
Tested for an hour now. Runs very smooth, dash charging works. But video playback doesn't work at all(browser, youtube, reddit, snapchat)
It's a Trainwreck not even close to daily driveable I've always loved lineage since CyanogenMod but they have a lot of work still I can't even get the firmware to work I'm gonna wait a few for a couple updates and try again but nitrogen seems solid until then
Added to the OnePlus 5 Index Thread here.
tattooed87129 said:
It's a Trainwreck not even close to daily driveable I've always loved lineage since CyanogenMod but they have a lot of work still I can't even get the firmware to work I'm gonna wait a few for a couple updates and try again but nitrogen seems solid until then
Click to expand...
Click to collapse
NOS is better. CRD is also down.
Planning to test this rom. Can be used as a daily driver?
On flashing as a fresh install the ROM always restarts to recovery. What am I doing wrong ?
-----
Got it working. I had to flash the firmware again
eNVy said:
On flashing as a fresh install the ROM always restarts to recovery. What am I doing wrong ?
-----
Got it working. I had to flash the firmware again
Click to expand...
Click to collapse
Use latest codeworkx recovery.
Anyone flash the latest from the cyanogen lineage site 17.0-20191006?
Thanks!
Regarding firmware folder, it seems it is empty. Is there any additional source?
pep0te said:
Thanks!
Regarding firmware folder, it seems it is empty. Is there any additional source?
Click to expand...
Click to collapse
Yes, you can find all the OP5 firmwares in the following post: https://forum.xda-developers.com/showpost.php?p=76943628&postcount=8
shadowstep said:
Yes, you can find all the OP5 firmwares in the following post: https://forum.xda-developers.com/showpost.php?p=76943628&postcount=8
Click to expand...
Click to collapse
Thanks dude! Brilliant.
I'm having issues with ads on this build. As everything in Android and apps and games revolve around ads it basically hinders just a bout everything. Whenever an ad-video tries to load while in-app, it just does nothing. Black screen and that's it. Reverted back to Stock OxygenOS.
ohohrobinho said:
I'm having issues with ads on this build. As everything in Android and apps and games revolve around ads it basically hinders just a bout everything. Whenever an ad-video tries to load while in-app, it just does nothing. Black screen and that's it. Reverted back to Stock OxygenOS.
Click to expand...
Click to collapse
Are you using an ad blocker? If yes, try to deactivate it for otherwise not working apps.
It failed to install.
After flashing the ZIP, Magisk and GApps, it boots to fastboot.
I disabled dm-verity in Magisk and the data partition is not encrypted.
pthfdr said:
After flashing the ZIP, Magisk and GApps, it boots to fastboot.
I disabled dm-verity in Magisk and the data partition is not encrypted.
Click to expand...
Click to collapse
Are you decrypted?
Flash rom , gapps and no verity
After setup flash magisk
Why do we need to flash firmware? Can't flash directly?
Hi all,
Can anyone explain why I can't use Google Pay(Tez) in this custom build of LineageOS 17 whereas it can run on official LineageOS 16 builds ?
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Additonal source code for Ascend Mate 7: https://github.com/Demelza/android_device_huawei_mt7_l09
Additonal source code for Honor 6: https://github.com/honor6-dev
KNOWN ISSUES
- Bluetooth audio not properly working
WONTFIX
- Infrared
- FMRadio
- MHL
- DualSIM support
- EAP-SIM
- USSD-Code execution
- Fingerprint scanner
READ BEFORE FLASHING!
These builds are NOT official and will never be!
Do not submit bug on CyanogenMod issue tracker
HOW TO INSTALL CM?
Unlock your bootloader else flashing via fastboot will be impossible
Upgrade your phone to the latest available stock rom (to get latest bootloader and baseband firmware)
Download ClockworkMod Recovery for your specific variant
Download CyanogenMod for your specific variant
Download Google Apps
Copy CyanogenMod and Google Apps zips to your external sdcard
Flash ClockworkMod Recovery via fastboot. (fastboot flash recovery cwm-mate7_YYYYMMDD.img)
Reboot into ClockworkMod Recovery
Do a Data wipe / Factory reset (This is IMPORTANT!)
Flash CyanogenMod zip
Flash Google Apps zip
Goto "Mounts & Storage" and select "Format /data and /data/media" (This is also IMPORTANT!)
Reboot and Enjoy
If you're getting error messages while trying to flash the CyanogenMod zip, THEN FOLLOW THE ABOVE INSTRUCTIONS.
Especially the part where it says "Flash ClockworkMod Recovery".
The ClockworkMod Recovery you've got from somewhere else is FAULTY!!!
WHERE TO GET CM?
Unofficial builds:
MT7-L09: cm-11-20150410-UNOFFICIAL-mt7_l09.zip - 243 MB
Google Apps:
https://www.androidfilehost.com/?fid=95832962473395379
Old builds:
None yet
HOW TO GO BACK TO STOCK ROM?
Download B127 stock firmware - 1.26 GB (ONLY FOR L09 !!!)
Extract it
Copy the Update.app into DLOAD folder on your external sdcard (sdcard1/DLOAD/Update.app)
Power off phone
Hold all 3 Buttons till "Fastboot & Rescue Mode" appears. Flashing should start automatically.
HOW TO BUILD CM FROM SOURCES?
http://forum.xda-developers.com/showpost.php?p=60019676&postcount=2
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Thanks to all contributors, especially codeworkx, without whom this project wouldn't even exist!!!
XDA:DevDB Information
CyanogenMod 11 for Ascend Mate 7 (MT7-L09), ROM for the Huawei Ascend Mate 7
Contributors
Demazda, codeworkx
Source Code: https://github.com/Demelza/android_device_huawei_mt7_l09
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-04-10
Created 2015-04-10
Last Updated 2015-04-10
Reserved
HOW TO BUILD?
1. Prepare your build environment and get the CM11 sources. Read the official CM wiki if you don't know how.
2. Add our local manifest
https://raw.githubusercontent.com/Demelza/manifests/cm-11.0/local_manifest.xml (goes to .repo/local_manifests/local_manifest.xml)
3. repo sync -j10
4. Run following commands to start building:
Code:
. build/envsetup.sh
lunch cm_h60_l01-eng
brunch cm_h60_l01-eng
Currenlty supported: cm_h60_l01-eng
Code:
Yes, h60-l01 is the identifier for Honor 6. The .zip will also be named "cm-11-YYYYMMDD-UNOFFICIAL-h60_l01.zip" if you build it yourself. But it'll flash and work on Mate 7 too.
Very nice, unfortunately it can no longer wake up after some time. Screen remains black.
Fooox1 said:
Very nice, unfortunately it can no longer wake up after some time. Screen remains black.
Click to expand...
Click to collapse
I've had this bug with my first build, but I uploaded another one a couple hours after, which does not have this bug. You can redownload and retry if you want.
Quick question: how is this ROM different from the other CM11 4.4.4 ROM that's available?
AhsanU said:
Quick question: how is this ROM different from the other CM11 4.4.4 ROM that's available?
Click to expand...
Click to collapse
It's more up-to-date and it's open-sourced. Other CM11 rom doesn't have source available.
Works great! Thank you for your efforts! =)
Whats wrong whith this rom ?!
before i have installed this rom i dont have problems with "cm-11-20150205-UNOFFICIAL-mate7" but with this -11-20150410-UNOFFICIAL-mt7_l09 i have errors Status 7 and when i del "getprop" from update-script i have status 4 .......
Who can help me ?! I have a Huawei Ascend MAte 7 TL10
EDIT://
only what i have do is i update CWM to 6.0.5.1
Hello everybody
I cannot install this ROM.
In recovery I get error status 7 (kinda "this ROM is for MT7-09, your device is H60" i don't remember exactly...). I tried to flash the CMW recovery provided by Demazda in the thread [RECOVERY][CWM] ClockworkMod Recovery 6.0.5.1 for Ascend Mate 7 (MT7-L09), but i get error message (target reported max download size of 471859200 bytes error: cannot load 'cwm_mate7_20150410.img': NO error).
The CMW recovery I'm running now is v.6.0.5.1: the one I flashed when I rooted and that I use for backups and to flash the ROM I'm using now MK44.4(CM11)(4.4.4).
Any suggestions?
Thanks...
leonardus_magnus said:
Hello everybody
I cannot install this ROM.
In recovery I get error status 7 (kinda "this ROM is for MT7-09, your device is H60" i don't remember exactly...). I tried to flash the CMW recovery provided by Demazda in the thread [RECOVERY][CWM] ClockworkMod Recovery 6.0.5.1 for Ascend Mate 7 (MT7-L09), but i get error message (target reported max download size of 471859200 bytes error: cannot load 'cwm_mate7_20150410.img': NO error).
The CMW recovery I'm running now is v.6.0.5.1: the one I flashed when I rooted and that I use for backups and to flash the ROM I'm using now MK44.4(CM11)(4.4.4).
Any suggestions?
Thanks...
Click to expand...
Click to collapse
Have you tried redownloading the CW image? Could be corrupt?
Thanks for getting this build going, Demazda. I was on the fence about flashing CM given the other CM build had Chinese bloatware in it, but now there's this clean version . I flashed it last night, and now there's no more lag when swapping apps or scrolling like stock has. It's almost like there's some decent NAND in there .
Why is the fingerprint scanner in the won't fix list? Is it because it's reliant on some proprietary blobs or ?
Also is there any reason I'm seeing a red outline around some apps that flashes for a quick second? I've noticed it a lot in Chrome, but it isn't just that. Just me?
NiceCarpet said:
Have you tried redownloading the CW image? Could be corrupt?
Click to expand...
Click to collapse
Thanks for your suggestion. I already solved. I flashed the stock recovery and than I flashed the CMW recovery provided by Demazda. THan I flashed without any issue this ROM...
I like it very much but I prefer the MK44.4... I miss PIE controls and I do no like PIE available with gravityBox. Thanks to Demazda for his work, anyway.
so i got my mate7 on monday and thanks to this thread i unlocked/rooted it today (thanks Demazda!!!). it took me awhile but i finally got CM11 installed and WOW!! i erased/reset my nexus 5 and gave it to my dad cause i now have the best phone ever! i hope to acquire some skills for android over the summer so that i could help out in developing for the mate7. hopefully PAC-ROM will be available some day. thanks for all the hard work to all that contribute to this great cause!
wifi....
Sometimes do not Wi-Fi....
0 WiFi issues here. Could you elaborate?
Really thanks demazda.
I install it yesterday and everything is working good (right now).
I just revert back the DPI to 480 because it's to small for my opinion and some app (launcher and others) don't display good with 320DPI.
Just a question, with this ROM as a base can we expect some port of other KK rom ? did you plan to update it ?
Really want to use this, since i love the material look you can give to it.
Unfortunately, i won't try to use this, since i really need the fingerprint scanner on the device.
Isn't there any way to fix it?
Djordie said:
Really want to use this, since i love the material look you can give to it.
Unfortunately, i won't try to use this, since i really need the fingerprint scanner on the device.
Isn't there any way to fix it?
Click to expand...
Click to collapse
Don't Expect any fingerprint for custom ROM, the sourcecode isn't available and huawei don't release any code (as i know) for that. only the kernel is available and i don't think the code for this is inside kernel.
After 2 days of use it's working good, BT audio don't work at all like demazda say in OP and i really need it so i cannot use as daily rom until someone fix it.
Wait for the futur
Demazda said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Additonal source code for Ascend Mate 7: https://github.com/Demelza/android_device_huawei_mt7_l09
Additonal source code for Honor 6: https://github.com/honor6-dev
KNOWN ISSUES
- Bluetooth audio not properly working
WONTFIX
- Infrared
- FMRadio
- MHL
- DualSIM support
- EAP-SIM
- USSD-Code execution
- Fingerprint scanner
READ BEFORE FLASHING!
These builds are NOT official and will never be!
Do not submit bug on CyanogenMod issue tracker
HOW TO INSTALL CM?
Unlock your bootloader else flashing via fastboot will be impossible
Upgrade your phone to the latest available stock rom (to get latest bootloader and baseband firmware)
Download ClockworkMod Recovery for your specific variant
Download CyanogenMod for your specific variant
Download Google Apps
Copy CyanogenMod and Google Apps zips to your external sdcard
Flash ClockworkMod Recovery via fastboot. (fastboot flash recovery cwm-mate7_YYYYMMDD.img)
Reboot into ClockworkMod Recovery
Do a Data wipe / Factory reset (This is IMPORTANT!)
Flash CyanogenMod zip
Flash Google Apps zip
Goto "Mounts & Storage" and select "Format /data and /data/media" (This is also IMPORTANT!)
Reboot and Enjoy
If you're getting error messages while trying to flash the CyanogenMod zip, THEN FOLLOW THE ABOVE INSTRUCTIONS.
Especially the part where it says "Flash ClockworkMod Recovery".
The ClockworkMod Recovery you've got from somewhere else is FAULTY!!!
WHERE TO GET CM?
Unofficial builds:
MT7-L09: cm-11-20150410-UNOFFICIAL-mt7_l09.zip - 243 MB
Google Apps:
https://www.androidfilehost.com/?fid=95832962473395379
Old builds:
None yet
HOW TO GO BACK TO STOCK ROM?
Download B127 stock firmware - 1.26 GB (ONLY FOR L09 !!!)
Extract it
Copy the Update.app into DLOAD folder on your external sdcard (sdcard1/DLOAD/Update.app)
Power off phone
Hold all 3 Buttons till "Fastboot & Rescue Mode" appears. Flashing should start automatically.
HOW TO BUILD CM FROM SOURCES?
http://forum.xda-developers.com/showpost.php?p=60019676&postcount=2
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Thanks to all contributors, especially codeworkx, without whom this project wouldn't even exist!!!
XDA:DevDB Information
CyanogenMod 11 for Ascend Mate 7 (MT7-L09), ROM for the Huawei Ascend Mate 7
Contributors
Demazda, codeworkx
Source Code: https://github.com/Demelza/android_device_huawei_mt7_l09
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-04-10
Created 2015-04-10
Last Updated 2015-04-10
Click to expand...
Click to collapse
Sorry, but anyway to fix USSD-Code execution? if not, is there any replacement?
Just wanted to pop in and say thanks Demazda, for this good clean CM11 for my device.
While I really like the look of the stock ROM and all it's extra benefits. Cyan/AOSP is just so reliable and I never used my fingerprint scanner anyway. Looking forward to see how battery life compares, anyone have any thoughts on how big of a difference it is to the stock ROM battery life?
I've been using MK44.4 and decided to try this. When I try to flash, the installation is aborted and it's telling me that my phone is something other than it actually is and refuses to install. WTF?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 14.1 on your device, or coming from another ROM?
Unlock Bootloader!
Download the zip(s).
Install Appropriate FW base (STOCK MM 4.21.40.xx base is required) simple FW update package is available at my download link
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package. Open Gapps x86 7.1
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
audio is a little weird in Real Racing 3.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Polaris Office, Chase Mobile, Showbox...
DRM content is currently broken
Live Display (color calibration) not working yet
Screen recording not working
Chromecast screen mirroring not working, native casting works though.
factory reset from setting menu has been reported to cause recovery boot loops.
Battery life is horrible, numerous display wakelock issues
CM14 (not device specific issues)
No CMTE yet
Status bar icon changing broken
CM file manager has trouble accessing external sdcard
Battery profile is non functional/string errors
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
As the Zenfone2 has multiple models from multiple countries please include the following information in your report:
model #
CPU Speed / RAM Size
device state when errors occur (BT/wifi/nfc on ? On a call ? sitting idle on shelf ? )
method to reproduce if you've found something consistent
Download Links
CyanogenMod for Z00A/ ze551ml: ROM
CyanogenMod for Z008/ ze550ml: ROM
Recovery Links
Z00A
MM BL compatible TWRP: TWRP
Z008
MM BL compatible TWRP: TWRP
Google apps addon:
Recommend GAPPS for now as the updated x86 gapps.
Flashable Modem updates:
FOR INFO ON MM BOOTLOADER BASED BUILDS SEE THIS POST
XDA:DevDB Information
CyanogenMod 14.1 Nightly Bulids (Z00A/Z008), ROM for the Asus ZenFone 2
Contributors
jrior001, crpalmer, say99
Source Code: https://github.com/CyanogenMod/android_kernel_asus_moorefield
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 4.21.40.xxx stock base
Version Information
Status: Beta
Beta Release Date: 2016-11-09
Created 2016-11-09
Last Updated 2016-11-22
Reserved
Official CM-13.0 -> CM14.1 Upgrade Guide
As seen with my previous unofficial CM-13.0 builds based on the MM Stock roms, An upgrade to the MM Firmware and bootloader is required going forward.
This guide is here to assist.
1) Download ROM and 7.1 GAPPS
2) Download my Firmware Update package for Z00A or Z008 . FASTBOOT AND ADB ARE REQUIRED!
3) Follow the included instructions to update Firmware and flash the new compatible TWRP. If for some reason the new TWRP is not flashed automatically flash it manually via fastboot. "fastboot flash recovery recoverimagename.img
4) Reboot to recovery and flash CM 14 and Gapps, reboot and enjoy. Data Wipe on upgrade is not required
CM 14.1 from Stock MM
1) Unlock Bootloader
2) Flash compatible TWRP
3) Perform desired backups
4) From recovery, factory reset & install ROM & 7.1 GAPPS
5) Enjoy!
CM 14.1 from CM13 Mm based beta builds
1) Reboot to TWRP( should already have good version)
2) Flash CM14.1 and 7.1 GAPPS
3) Reboot and enjoy!!
Yes!!!
yes u made it sir.. most awaited build of the year.. we really appreciate your time and efforts given to the project.. May God bless you.. behalf of all the zf2 a big thanks to @jrior001 and @say99
Sent from my ASUS_Z008 using XDA-Developers mobile app
just a question. Do i need to be on MM Bloobs or can I upgrade straight from LP bloobs? Also has the Brazilian sensors bug been fixed on CM14.1?
leoarten said:
just a question. Do i need to be on MM Bloobs or can I upgrade straight from LP bloobs? Also has the Brazilian sensors bug been fixed on CM14.1?
Click to expand...
Click to collapse
Has this been resolved in stock? I've heard mixed reports. I've included the updated sensor firmware from the .144 stock update so if it's in there we got it.
See post 2 as I update it, gonna try trying o cover all possible situations in guide there.
Sent from my ASUS_Z00A using Tapatalk
Awesome!
Downloading...
Downloading now.
Is the camera bug still present on N? Shouldn't the MM BLOBS fix that?
Thanks for your effort, @jrior001 !!!!
Thanks.. but just to clarify.. I need to update bootloader to MM Blobbs before I install CM14 right? or just flash new TWRP and flash rom as per usual (from LP Bloobs)? Im a bit confused.. Yes I saw theres a MM Bloobs session.. but couldnt find the answer to this.
Awesome work btw
jrior001 said:
Has this been resolved in stock? I've heard mixed reports. I've included the updated sensor firmware from the .144 stock update so if it's in there we got it.
See post 2 as I update it, gonna try trying o cover all possible situations in guide there.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
leoarten said:
Thanks.. but just to clarify.. I need to update bootloader to MM Blobbs before I install CM14 right? or just flash new TWRP and flash rom as per usual (from LP Bloobs)? Im a bit confused.. Yes I saw theres a MM Bloobs session.. but couldnt find the answer to this.
Awesome work btw
Click to expand...
Click to collapse
Direct from post #2:
Official CM-13.0 -> CM14.1 Upgrade Guide
As seen with my previous unofficial CM-13.0 builds based on the MM Stock roms, An upgrade to the MM Firmware and bootloader is required going forward.
This guide is here to assist.
1) Download ROM and 7.1 GAPPS
2) Download my Firmware Update package for Z00A or Z008 . FASTBOOT AND ADB ARE REQUIRED!
3) Follow the included instructions to update Firmware and flash the new compatible TWRP. If for some reason the new TWRP is not flashed automatically flash it manually via fastboot. "fastboot flash recovery recoverimagename.img
4) Reboot to recovery and flash CM 14 and Gapps, reboot and enjoy. Data Wipe on upgrade is not required
Sent from my ASUS_Z00A using Tapatalk
Thank you very much..
jrior001 said:
Direct from post #2:
Official CM-13.0 -> CM14.1 Upgrade Guide
As seen with my previous unofficial CM-13.0 builds based on the MM Stock roms, An upgrade to the MM Firmware and bootloader is required going forward.
This guide is here to assist.
1) Download ROM and 7.1 GAPPS
2) Download my Firmware Update package for Z00A or Z008 . FASTBOOT AND ADB ARE REQUIRED!
3) Follow the included instructions to update Firmware and flash the new compatible TWRP. If for some reason the new TWRP is not flashed automatically flash it manually via fastboot. "fastboot flash recovery recoverimagename.img
4) Reboot to recovery and flash CM 14 and Gapps, reboot and enjoy. Data Wipe on upgrade is not required
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Thanks for your job, but no sensors found in brazilians devices...
ysllan said:
Thanks for your job, but no sensors found in brazilians devices...
Click to expand...
Click to collapse
Not that I can do anything about Asus's fail here but I'd like to see a logcat & dmesg captured from boot on this issue.
Sent from my ASUS_Z00A using Tapatalk
Is there Xposed for CM 14?
yumms said:
Is there Xposed for CM 14?
Click to expand...
Click to collapse
Nope right now. Just stay tuned for updates from rovo's thread.
Sent from my ASUS_Z00A using XDA Labs
jrior001 said:
Not that I can do anything about Asus's fail here but I'd like to see a logcat & dmesg captured from boot on this issue.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Did you use the 144 blobs? Asus solved problems with this version.
Enviado de meu ASUS_Z00A usando Tapatalk
I'm sorry to be a pain in the ars*. But you've mentioned you're basing on .144 stock update right? Having said that the link you posted with the zip to update bootloader Ive found files mentioning 4_21_40_134.bin (.134) wouldnt this be the reason sensors arent still working for brazilians devices? I had a look at Asus website and this is fix has been implemented on .144 update. So is this update on script and files updating bootloader or are they on the ROM itself..
Now I know the rules on XDA and I wouldnt dare to ask for ETA, however if this is the case, I would ask very politely if you could update the scripts files to .144 whenever's convenient for you and whenever you have time. That would be much appreciate. I will be coming back to this post and will be waiting anxiously for this.. Take you time and Thank you again.
jrior001 said:
Has this been resolved in stock? I've heard mixed reports. I've included the updated sensor firmware from the .144 stock update so if it's in there we got it.
See post 2 as I update it, gonna try trying o cover all possible situations in guide there.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
jrior001, crpalmer, say99 are best!)) Makes backup and installed
see, told you guys that it will be soon please take use of logcat whenever you guys are reporting some issue, we won't be able to do anything without logcat if we can't produce it on our device. Enjoy people
jrior001 said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 14.1 on your device, or coming from another ROM?
Unlock Bootloader!
Download the zip(s).
Install Appropriate FW base (STOCK MM 4.21.40.xx base is required) simple FW update package is available at my download link
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package. Open Gapps x86 7.1
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
audio is a little weird in Real Racing 3.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Ingress, Polaris Office, Chase Mobile, Showbox...
DRM content is currently broken
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
As the Zenfone2 has multiple models from multiple countries please include the following information in your report:
model #
CPU Speed / RAM Size
device state when errors occur (BT/wifi/nfc on ? On a call ? sitting idle on shelf ? )
method to reproduce if you've found something consistent
Download Links
CyanogenMod for Z00A/ ze551ml:ROM
CyanogenMod for Z008/ ze550ml:ROM
Recovery Links
Z00A
MM BL compatible TWRP: TWRP
Z008
MM BL compatible TWRP: TWRP
Google apps addon:
Recommend GAPPS for now as the updated x86 gapps.
Flashable Modem updates:
FOR INFO ON MM BOOTLOADER BASED BUILDS SEE THIS POST
XDA:DevDB Information
CyanogenMod 14.1 Nightly Bulids (Z00A/Z008), ROM for the Asus ZenFone 2
Contributors
jrior001, crpalmer, say99
Source Code:https://github.com/CyanogenMod/android_kernel_asus_moorefield
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 4.21.40.xxx stock base
Version Information
Status: Beta
Beta Release Date: 2016-11-09
Created 2016-11-09
Last Updated 2016-11-09
Click to expand...
Click to collapse
haha thx so much bt wechat isnt working too haha
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include "std_disclaimer.h"
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
Installation
Upgrading from CyanogenMod/unofficial LineageOS without wiping
Download the EXPERIMENTAL and NIGHTLY builds using the download link below
Install the EXPERIMENTAL build, without wiping anything.
Reboot into Android
Reboot back into recovery
Install the NIGHTLY build, without wiping anything.
Enjoy LineageOS!
First time LineageOS 14.1 installation on your Galaxy S IV:
Flash a custom recovery via Heimdall or Odin
Push GApps (arm) and the Lineage 14.1 zip to your device
Boot into Recovery
Perform factory reset
Flash the Lineage 14.1 zip from SD card
Flash GApps from SD card
Reboot
Upgrading from earlier version of LineageOS:
Update your recovery - Lineage Recovery will be done automatically, TWRP can be downloaded from here (NOTE: you need 3.0.2-2 or higher to automatically install updates in Lineage 14.1)
Push the new Lineage 14.1 zip to your SD card
Boot into Recovery
Flash the Lineage 14.1 zip from SD card
Flash the most recent GApps for 7.1 if you are upgrading from earlier android version
Reboot
Downloads
Install packages: https://download.lineageos.org/jfltexx
Google Apps (arm): http://wiki.lineageos.org/gapps.html
Root add-on: https://download.lineageos.org/extras
Reporting bugs
Bug reports belong on JIRA. See our wiki for more information on using JIRA.
I do not check this thread regularly for bug reports. Using JIRA makes tracking down & debugging bugs a lot easier. Feel free to use this thread to discuss bugs, though
DO NOT report bugs if you're running a custom kernel
DO NOT report bugs if you've modifies system files
DO NOT report bugs if you've installed xposed and/or other mods
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
See how to submit a bug report for the appropriate place to report your bug (NOTE: the majority of bugs need to go in the BUGBASH tracker, which is only open on weekends).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues or bugs already reported on JIRA. Any bug not reported in the bug report format below may be ignored.
Code:
Phone Informations
* Lineage version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous official cm build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
* Last version it worked on
* Repro steps
Getting help
You can ask for help on our subreddit, on IRC: #LineageOS on Freenode
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
LineageOS 14.1 for i9505, ROM for the Samsung Galaxy S IV I9505, ROM for the Samsung Galaxy S4
Contributors
side
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Nightly
Created 2017-03-15
Last Updated 2017-04-21
reserved
more reserved
Thanks! I was waiting for this
P.S. There is an EXPERIMENTAL build for jfltexx? I think it is necessary in order to upgrade from CyanogenMod. Just asking
robertogl said:
Thanks! I was waiting for this
P.S. There is an EXPERIMENTAL build for jfltexx? I think it is necessary in order to upgrade from CyanogenMod. Just asking
Click to expand...
Click to collapse
I tried to dirty flash from Benlue unofficial ROM to this official ROM using TWRP.
I get ZIP Signature Verification Fail and don't know if I dare to turn OFF ZIP Signature Verification
woowww thanks @side
Mittaa said:
I tried to dirty flash from Benlue unofficial ROM to this official ROM using TWRP.
I get ZIP Signature Verification Fail and don't know if I dare to turn OFF ZIP Signature Verification
Click to expand...
Click to collapse
Then do not dirty flash.
Pwnycorn said:
Then do not dirty flash.
Click to expand...
Click to collapse
Ok I will wait for EXPERIMENTAL build for jfltexx
@side
Man, u are god, big thanks to u
Why is that not included
You must separately install a root package with default lineage now, it is not included.
Default line is here: https://download.lineageos.org/extras
addonsu-arm-signed.zip
dj3d said:
Why is that not included
You must separately install a root package with default lineage now, it is not included.
Default line is here: https://download.lineageos.org/extras
addonsu-arm-signed.zip
Click to expand...
Click to collapse
it is already said to the first post mister
@side - So does this replace the "[JDCTeam][7.1.1][12 March]Optimized LineageOS 14.1-Stable1[Dev by Poll]" build ?
rapid_rabbit said:
@side - So does this replace the "[JDCTeam][7.1.1][12 March]Optimized LineageOS 14.1-Stable1[Dev by Poll]" build ?
Click to expand...
Click to collapse
No way....!!!
'' [OFFICIAL][WEEKLY][7.1.1] LineageOS 14.1 for i9505'' <---this is one is pure LineageOS ROM ,with no custom tweaks,no custom kernel no nothing.its like the Official CM13.0.it has got all features that LineageOS support
"[JDCTeam][7.1.1][12 March]Optimized LineageOS 14.1-Stable1[Dev by Poll]" <---this is MY rom...my custom rom...my edits...my tweaks...the base of that rom is the official lineageOS.i added some stuff etc
@dj3d I think the developers decided it that way to make a nice "stock" lineage os without "all singing all dancing" stuff. Just to keep it clean and pure.
Thanks a lot !
Works great
Mittaa said:
Ok I will wait for EXPERIMENTAL build for jfltexx
Click to expand...
Click to collapse
Next question would be ... when do we have a EXPERIMENTAL build?
EXPERIMENTAL build use to come before the first official
Mittaa said:
Next question would be ... when do we have a EXPERIMENTAL build?
EXPERIMENTAL build use to come before the first official
Click to expand...
Click to collapse
there will be NO experimental...
builds will stay labeled as they are...
'experimental 'snapshot' etc was CM stuff
do NOT expect ANY change to this ROM's title
@side:
I think he means the EXPERIMENTAL Build for dirty installation from unofficial to official
meeeh...if u want to run official release u have to fully wipe...
NEXT builds will be able to be dirty installed over previous official release
side said:
meeeh...if u want to run official release u have to fully wipe...
NEXT builds will be able to be dirty installed over previous official release
Click to expand...
Click to collapse
Official?? So you are THE Jfltexx's maitainer...after so long time, that's good to me?
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
This thread is not the right place to discuss about mods/addons.
HOW TO INSTALL LINEAGEOS
- Make sure your phone was running OxygenOS 5.1 at least once and is currently on latest firmware
- Remove custom encryption pins/passwords else decryption will fail!
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
HOW TO UPDATE LINEAGEOS (15.1 -> 15.1)
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Reboot
DOWNLOADS
Lineage 15.1: https://download.lineageos.org/cheeseburger (Unofficial: https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/)
Vendor images: https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/vendor/
Firmware: https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/firmware/
Migration-Tools: https://androidfilehost.com/?w=files&flid=254680 (Unofficial->Official, Official->Unofficial)
SU-Addon: https://androidfilehost.com/?w=files&flid=259254
Google Apps: https://androidfilehost.com/?fid=962187416754462508 | http://opengapps.org/
TWRP: XDA | twrp.me
DEVELOPER RESOURCES
https://github.com/LineageOS/android_device_oneplus_cheeseburger
https://github.com/LineageOS/android_device_oneplus_msm8998-common
https://github.com/LineageOS/android_kernel_oneplus_msm8998
HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/
Good job!
But you link to Official Open Gapps. Open Gapps don't have 8.1 as of now. I think it would be better to link to another 8.1 working Gapps while waiting for Open Gapps to be updated to 8.1. Just to avoid confusion.
Keep up the good work you doing! And thanks for bringing that early Lineage 15.1 build to OP5.
Seems to work as good as stable
No issues so far #Mr_complicated
Yousvel said:
Good job!
But you link to Official Open Gapps. Open Gapps don't have 8.1 as of now. I think it would be better to link to another 8.1 working Gapps while waiting for Open Gapps to be updated to 8.1. Just to avoid confusion.
Keep up the good work you doing! And thanks for bringing that early Lineage 15.1 build to OP5.
Click to expand...
Click to collapse
Afaik there's no 100% working package yet.
Sent from my OnePlus5T using XDA Labs
For encrypted or decrypted devices?
codeworkx said:
Afaik there's no 100% working package yet.
Sent from my OnePlus5T using XDA Labs
Click to expand...
Click to collapse
This one works perfectly fine. More than 6000 downloads already. And I personally used it. It's working great. Zero issue.
https://androidfilehost.com/?fid=745849072291693774
Ground Zero gapps are working fine too
Does Magisk work for anyone here?
Blackbird1997 said:
For encrypted or decrypted devices?
Click to expand...
Click to collapse
doesn't matter since you have to format data.
codeworkx said:
doesn't matter since you have to format data.
Click to expand...
Click to collapse
A lot of people are already on Oreo so it does matter.
I now have laos15.1 on it. Come from the encrypted Omni 8.1. ?
Following Gapps used: https://builds.nezorfla.me/opengapps/20171229/
Blackbird1997 said:
I now have laos15.1 on it. Come from the encrypted Omni 8.1. ?
Click to expand...
Click to collapse
And you did not formatted your data so why thanked OP's answers?
Is dash charge implemented cuz my phone seems to be charging a little slower
Otherwise the rom is great, no bugs so far
@mcduffie2010 I have wiped data, system and cache in twrp
Blackbird1997 said:
@mcduffie2010 I have wiped data, system and cache in twrp
Click to expand...
Click to collapse
Wiping and formatting are two different things.
I have WIPED.
Blackbird1997 said:
I have WIPED.
Click to expand...
Click to collapse
So don't thank OP when he is giving false info.
If you're already on Oreo you don't have to format data again.
What is your problem?
And they already complain
DEVELOPER thanks for sharing your rom!
mcduffie2010 said:
So don't thank OP when he is giving false info.
If you're already on Oreo you don't have to format data again.
Click to expand...
Click to collapse
We recommend to do.
Try going from OOS 5 to 15.1.
Sent from my OnePlus5T using XDA Labs
LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11.0 (R), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Known bugs:
Screen mirroring via slimport HDMI adapter doesn't work.
PMF aka 802.11w doesn't supported. Read here about it.
Encryption has problems. Read here about it.
Downloads:
ROM: https://sourceforge.net/projects/hammerhead-lineageos/files/18.1/
GAPPS: https://opengapps.org/?arch=arm&api=11.0&variant=pico
Credits:
Many thanks to the LineageOS team and all the contributors out there in the community
Contributors:
z3DD3r
Source Code:
Device tree: https://github.com/z3DD3r/android_device_lge_hammerhead/tree/lineage-18.1
Kernel tree: https://github.com/z3DD3r/android_kernel_lge_hammerhead/tree/lineage-18.1
Vendor tree: https://github.com/z3DD3r/android_vendor_lge/tree/lineage-18.1
Android version: 11.0.0 (R)
Kernel version: Linux 3.4.113
SELinux: Enforcing
Status: Stable
Created 2021-01-07
Last Updated 2021-06-08
ROM Installation
To install rom you should increase the /system partition size
This can be done for example with TWRP HH.R
[RECOVERY][UNOFFICIAL] TWRP HH for Nexus 5 (hammerhead)
TWRP HH for Nexus 5 About: TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with...
forum.xda-developers.com
GAPPS Installation
LineageOS Team have recommendations about GAPPS
Here are the most important two copied from LineageOS WiKi:
If you opt to use Open GApps, they offer a variety of sizes of packages that include and overwrite different apps. We only recommend package sizes up through nano. If you use a larger package, we can not guarantee that everything will function on your device, as in many of these cases our included apps are overwritten in favor of the Google App equivalents.
Google apps should be installed via recovery immediately after installing LineageOS. If you reboot into LineageOS before installing Google apps, you must factory reset and then install them, otherwise expect crashes.
Patches
Patches you need to apply to the source code to get the same functionality as in my builds. All patches are actual as of Jun 24, 2022.
SurfaceFlinger
https://review.lineageos.org/c/LineageOS/android_frameworks_native/+/310715
https://review.lineageos.org/c/LineageOS/android_vendor_lineage/+/310716
QCOM display
GitHub - z3DD3r/android_hardware_qcom_display
Contribute to z3DD3r/android_hardware_qcom_display development by creating an account on GitHub.
github.com
git fetch https://github.com/z3DD3r/android_hardware_qcom_display lineage-18.1 && git cherry-pick 29fb1e50d1f2b7cf2386ab168fcffd23450a4ba8^..a7cf3dab9881e40550617febd03a68ace43cfa5f
QCOM media
GitHub - z3DD3r/android_hardware_qcom_media
Contribute to z3DD3r/android_hardware_qcom_media development by creating an account on GitHub.
github.com
git fetch https://github.com/z3DD3r/android_hardware_qcom_media lineage-18.1 && git cherry-pick 8f2abf1879e48068b86d57d8d67d799623a7157a^..075f70c24c10173a861bd84cdd08926783f6680b
Vold (USB OTG)
GitHub - z3DD3r/android_system_vold
Contribute to z3DD3r/android_system_vold development by creating an account on GitHub.
github.com
git fetch https://github.com/z3DD3r/android_system_vold lineage-18.1 && git cherry-pick fcbc4e0cff6843f011e814e6ced291055cc2d467^..cc5f962ed154717df93ddd0843d3bb57739bdd77
AOSP Keyboard (Optional)
GitHub - z3DD3r/android_packages_inputmethods_LatinIME
Contribute to z3DD3r/android_packages_inputmethods_LatinIME development by creating an account on GitHub.
github.com
git fetch https://github.com/z3DD3r/android_packages_inputmethods_LatinIME lineage-18.1 && git cherry-pick 7e55f8c6b7257af03891934da329e2f6aea72c67^..6b0819b6373ee18766d8b1846dcf512dd527dc13
Trebuchet Launcher (Optional)
https://review.lineageos.org/c/LineageOS/android_packages_apps_Trebuchet/+/303250
Please, give actual link to 11 gapps
Ogzador said:
Please, give actual link to 11 gapps
Click to expand...
Click to collapse
An user by the name BrainWash has found unofficial builds of arm Gapps packages for Android 11, that user has shared a link in the Nexus 5 Telegram group.
They might work or not, give them a try on your own risk.
althafvly - Browse /gapps at SourceForge.net
sourceforge.net
gapps a11 arm
althafvly - Browse /gapps at SourceForge.net
sourceforge.net
Need help, please. After los18 zip installing, my twrp was killed. And now i have los recovery. And none-resized sistem partition. Now i can't install gapps.
Ogzador said:
Need help, please. After los18 zip installing, my twrp was killed. And now i have los recovery. And none-resized sistem partition. Now i can't install gapps.
Click to expand...
Click to collapse
Those issues you mention don't seem to be related to this ROM. I just flashed this ROM on my N5 and my TWRP did not get overwritten nor did my partition sizes get reverted to the stock sizes. I don't know what has gone wrong on your side.
Woah, amazing. Thanks! Everything seems to be working so far, only Magisk fails to install.
zheega said:
Woah, amazing. Thanks! Everything seems to be working so far, only Magisk fails to install.
Click to expand...
Click to collapse
Magisk v21.2 installs and works without any issues. Makes sure you flash an up to date version of Magisk, redownload it if doesn't install.
Yes, thank you. I was using a bit older build that didn't work.
Mr.FREE_Bird said:
Those issues you mention don't seem to be related to this ROM. I just flashed this ROM on my N5 and my TWRP did not get overwritten nor did my partition sizes get reverted to the stock sizes. I don't know what has gone wrong on your side.
Click to expand...
Click to collapse
while setting up when booted in, it ask if u want to update lineage recovery along with the os. I think that may overwrite twrp
JackyGundam said:
while setting up when booted in, it ask if u want to update lineage recovery along with the os. I think that may overwrite twrp
Click to expand...
Click to collapse
Maybe but judging from what he said I think he says that his TWRP got overwritten and his partitions got reverted to the stock sizes right after flashing the ROM. So it looks like he did something wrong or doesn't read what the setup asks him...
Wow amazing a lot of thanks for this rom
Latest build ( lineage-18.1-20210109 ) seems to be stuck in a forever-boot-loop.
Here booting well
Having no boot problems with 20210109 comming from 17.1-20201231
It doesn't work with fresh install (just a constant boot loop), but updating from 20210108 to 20210109 works.
zheega said:
It doesn't work with fresh install (just a constant boot loop), but updating from 20210108 to 20210109 works.
Click to expand...
Click to collapse
My tester said that everything works fine after clean installation as well as after update. But there is a problem with latest test package of opengapps. Device can't boot. So if u used opengapps then this is your problem.
Anyway before posting such reports try to perform a clean flash of the ROM without additional packages (gapps/magisk/mods)
I haven't used my Nexus 5 in a few years and now I would like to update it to android 10, in particular your LineageOS 17.1.
But being many years since the last update I was wondering if my recovery, kernel and radio were compatible with android 10. Would you be able to suggest which recovery, which magisk version, which kernel and radio to install? Maybe kernel and radio now come bundled with the OS (?)
Lastly, there is any peculiar step for a clean installation procedure?
I tried to search on the thread beforehand, but couldn't find the answers. Sorry if you already answered my questions.
Thanks a lot for the your time and effort!