{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note - Iam Not Responsible for bricked devices
About LineageOS
LineageOS is a free and open-source operating system for set-top boxes, smartphones and tablet computers, based on the Android mobile platform. It is the successor to the custom ROM CyanogenMod, from which it was forked in December 2016 when Cyanogen Inc. announced it was discontinuing development and shut down the infrastructure behind the project. Since Cyanogen Inc. retained the rights to the Cyanogen name, the project rebranded its fork as LineageOS.
LineageOS was officially launched on December 24, 2016, with the source code available on GitHub. Since that time, LineageOS development builds now cover more than 185 phone models with over 1.9 million active installs,having doubled its user base in the month February–March 2017 And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Installation procedure
Note - I don't recommend you people to flash any other custom kernels on this ROM untill Nokia release kernel sources. Because this ROM supports only stock kernel .
1. Download Rom.zip , Perf-Stock-9.0-SLD_sprout.zip , twrp.img & vbmeta.img
2. power off your phone boot in to bootloader mode and flash twrp
3. Boot in to Twrp
4. Format data by typing yes
5. Wipe everything
6. Flash rom.zip
7. Now tap on reboot and tap on recovery now your phone reboots in to twrp again
8. Tap on reboot and check your current active slot.
Example - if twrp shows current active slot A change to B if B change to A
9. Now flash Gapps.zip
10. Now flash Perf-Stock-9.0-SLD_sprout.zip
11. Wipe all except system & vendor
10. Tap on reboot bootloader
11. Now your phone boots in to bootloader mode
12. Now open cmd in pc flash vbmeta using this command
for slot-a > fastboot flash vbmeta_a --disable-verity --disable-verification vbmeta.img
for slot-b> fastboot flash vbmeta_b --disable-verity --disable-verification vbmeta.img
( thanks to @singhnsk for this step )
13. now type fastboot reboot
and wait for 3 min rom will boot up
Credits
* LineageOS & CO (For Source Code)
* All the authors in my git sources
* Nokia For Prebuilt Vendor & Kernel Source
* Moderators (For Giving Freedom To Post Threads)
* My entire Nokia 6.2 community Thank you all for your massive support Again
Join Nokia 6.2 Community
Download Rom
Download Stock Pie kernel
Download vbmeta
Download Gapps
Download Official Twrp
Android OS version: 9.0.0_r46
Security patch level: October 2019
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/LineageOS
Whats working?
Ril
Wifi
Mobile data
Double tap to wake
Double tap to sleep
Adaptive brightness
Dark theme
Ambient display
Flash light
Sound / vibration
Camera
Volte
Selinux - permissive
Fingerprint
Known issues
All fixed for now . comment below if you face any bugs
FLASH GAPPS MANUALLY
Very nice rom [emoji1]
Sent from my [device_name] using XDA-Developers Legacy app
Installation experience
First of all, thanks for releasing a ROM on the same week that I purchased the new device!
At first I tried to just the stock ROM, running with TWRP and Magisk, and that worked with one reboot, but after select reset to factory settings in booted OS, it booted back to recovery in a recovery.
I had a problem with Magisk v20.1, which decided to leave my phone in a recovery bootloop (seems like it is a common issue on other phones too).
As I didn't have a backup of the original ROM (yes, I know I should have done this as soon as I had TWRP booted!), I had to install this ROM.
So far the installation went really well, but the switching between _a and _b seems a necessary step for some reason ? What will happen in future? Do we need to keep switching between _a and _b half way through the installation process ? Why do we need to do this between the ROM install and gapps install ?
If I want to install TWRP again after this ROM, should I overwrite boot_a and boot_b with your latest TWRP ?
Again, thanks for the ROM, it saved me from the recovery bootloop!
tusker said:
First of all, thanks for releasing a ROM on the same week that I purchased the new device!
At first I tried to just the stock ROM, running with TWRP and Magisk, and that worked with one reboot, but after select reset to factory settings in booted OS, it booted back to recovery in a recovery.
I had a problem with Magisk v20.1, which decided to leave my phone in a recovery bootloop (seems like it is a common issue on other phones too).
As I didn't have a backup of the original ROM (yes, I know I should have done this as soon as I had TWRP booted!), I had to install this ROM.
So far the installation went really well, but the switching between _a and _b seems a necessary step for some reason ? What will happen in future? Do we need to keep switching between _a and _b half way through the installation process ? Why do we need to do this between the ROM install and gapps install ?
If I want to install TWRP again after this ROM, should I overwrite boot_a and boot_b with your latest TWRP ?
Again, thanks for the ROM, it saved me from the recovery bootloop!
Click to expand...
Click to collapse
Hy there well your question
Why do we need to do this between the ROM install and gapps install ?
Here is my answer
We all know that what exactly a/b concept does
If we flash a zip from slot a automatically the zip installation will be done on alternative slot means inactive slot ( if you flash from A obviously inactive will be slot B ) now what next?
You question is why we need to switch slot after flashing ROM and flash gapps ?
Yes you have to switch because ROM has been installed on slot B here if you don't switch the slot and if you flash gapps automatically gapps will be installed on empty system because ROM flashed on slot b . so you have to switch and flash gapps so that gapps Will be installed on a particular ROM.
Build source code structure
Thanks for the explanation!
Would it be possible to share your build script changes that allows you to build this ROM ? I'd like to build it myself, to fix things such as enabling NFC, proximity sensor timeout (both of which I am having problems with).
Cheers,
Damien
Should I install this? this is my first time installing a ROM and im a bit worried that i might break something,
Good
Bluetooth is not working, it connects but cannot get audio out from bluetooth headset.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
IR Blaster
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
Known issues:
You Tell me
Instructions :
Download the latest build and GApps
Reboot to bootloader
Download the oreo stock rom. From here
Download platform tools and extract them straight into the stock rom folder. Not images folder.
Replace the system.img and boot.img with the boot.img, system_other.img and system.img in images folder (system.img and system_other.img are same. Just make 2 copies of system.img and rename one to system_other.img):-|
Replace modem.img from pie stock rom. Grab it HERE
Then use flash_all.bat to install the rom. ( We are using fastboot method because the TWRP is completely broken and doesn't even let us flash the rom. But @33bca is working on one. We'll soon have stable TWRP )
Let the flashing be completed.
After the flash is completed, just go to recovery (stock los one) format data again.
If you want gapps, boot to twrp by downloading official TWRP and using fastboot boot *******.img
Flash gapps
Reboot. After first boot, reboot to twrp
Then flash this kernel in the same recovery.
That's it. Now just reboot and you have a working stable LineageOS
If you like my work, consider hitting the thanks button down there and if possible, donate me Here Via PayPal
Downloads :
UN-Official builds: LATEST BUILD
Special Thanks to @LCockx and @a.dev for testing the builds
JOIN OUR OFFICIAL TELEGRAM GROUP
XDA:DevDB Information
[ROM][UNOFFICIAL][8.1.0][Daisy] LineageOS 15.1 , ROM for the Xiaomi Mi A2 Lite
Contributors
saksham_033
Source Code: Click here
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Stable Release Date: 2019-02-20
Created 2019-02-20
Last Updated 2019-02-20
Reserved
Bootloop for me.
I used V10.0.3.0's modem.img and opengapps 8.1 arm64 nano.
EDIT:
I booted to TWRP and swapped the slots, rebooted to system.
Initially it booted to the LOS recovery, but when I pressed "reboot" in the recovery, it rebooted straight to the LOS animation.
Thanks for this!
EDIT 2:
Oh dear. Wifi appears broken.
rosiepie said:
Bootloop for me.
I used V10.0.3.0's modem.img and opengapps 8.1 arm64 nano.
EDIT:
I booted to TWRP and swapped the slots, rebooted to system.
Initially it booted to the LOS recovery, but when I pressed "reboot" in the recovery, it rebooted straight to the LOS animation.
Thanks for this!
EDIT 2:
Oh dear. Wifi appears broken.
Click to expand...
Click to collapse
Dude, please try to read all the instructions. I have mentioned a kernel. U Need to flash that too. Thanks.
nice one ? finally boot haha maybe I'm wrong the way I flash it? hehe hit button thanks
Pls post antutu benchmark on this rom ty..
Overunity01 said:
Pls post antutu benchmark on this rom ty..
Click to expand...
Click to collapse
76k+
Thank you. There is issue with SIM card and camera if I come from Pie and downgrade?
thank you :good:
saksham_033 said:
Instructions :
Download the latest build and GApps
Replace modem.img from pie stock rom.
Click to expand...
Click to collapse
1. The Latest Build shows a vendor.img - Do we replace that as well?
2. Is there a download available for the stock Pie modem, or do we have to download the whole stock pie rom as well?
Thanks!
saksham_033 said:
Dude, please try to read all the instructions. I have mentioned a kernel. U Need to flash that too. Thanks.
Click to expand...
Click to collapse
I followed all instructions exactly as described.
The kernel was flashed also, and in the order the guide specified.
Thanks for the rom, is this on the last security patch?.
rosiepie said:
I followed all instructions exactly as described.
The kernel was flashed also, and in the order the guide specified.
Click to expand...
Click to collapse
Kernel has to be flashed after first boot
mn1968 said:
1. The Latest Build shows a vendor.img - Do we replace that as well?
2. Is there a download available for the stock Pie modem, or do we have to download the whole stock pie rom as well?
Thanks!
Click to expand...
Click to collapse
Nope. You need not to touch vendor.
Does LOS 15.1 support notch?
downloadonlyaccount said:
Does LOS 15.1 support notch?
Click to expand...
Click to collapse
Yes. Notch is supported
downloadonlyaccount said:
Does LOS 15.1 support notch?
Click to expand...
Click to collapse
notch are not supported by Oreo, except 8.1 stock for daisy
If I'm on pie and need to downgrade but I need 2 SIM cards to work, what vendor to I need?
ergo911 said:
If I'm on pie and need to downgrade but I need 2 SIM cards to work, what vendor to I need?
Click to expand...
Click to collapse
problem is not in vendor choice
you need fix modem settings
https://forum.xda-developers.com/mi-a2-lite/how-to/gsi-tweaks-fix-t3899630
New to this phone
Could you please elaborate on the following:
Instructions :
Download the latest build and GApps
Reboot to bootloader
Download the oreo stock rom. From here
Download platform tools and extract them straight into the stock rom folder. Not images folder. - What platform tools?
Replace the system.img and boot.img with the boot.img, system_other.img and system.img in images folder (system.img and system_other.img are same. Just make 2 copies of system.img and rename one to system_other.img):-|
Replace modem.img from pie stock rom. - Where do i get this?
Then use flash_all.bat to install the rom. ( We are using fastboot method because the TWRP is completely broken and doesn't even let us flash the rom. But @33bca is working on one. We'll soon have stable TWRP )
Let the flashing be completed.
After the flash is completed, just go to recovery (stock los one) format data again.
If you want gapps, boot to twrp by downloading official TWRP and using fastboot boot *******.img
Flash gapps
Reboot. After first boot, reboot to twrp
Then flash this kernel in the same recovery.
That's it. Now just reboot and you have a working stable LineageOS
Click to expand...
Click to collapse
Also, how will updates be flashed?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note - Iam Not Responsible for bricked devices
About LineageOS
LineageOS is a free and open-source operating system for set-top boxes, smartphones and tablet computers, based on the Android mobile platform. It is the successor to the custom ROM CyanogenMod, from which it was forked in December 2016 when Cyanogen Inc. announced it was discontinuing development and shut down the infrastructure behind the project. Since Cyanogen Inc. retained the rights to the Cyanogen name, the project rebranded its fork as LineageOS.
LineageOS was officially launched on December 24, 2016, with the source code available on GitHub. Since that time, LineageOS development builds now cover more than 185 phone models with over 1.9 million active installs,having doubled its user base in the month February–March 2017 And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Installation procedure
Note - I don't recommend you people to flash any other custom kernels on this ROM untill Nokia release kernel sources. Because this ROM supports only stock kernel .
1. Download Rom.zip , Perf-Stock-9.0-DDV_sprout.zip , twrp.img & vbmeta.img
2. power off your phone boot in to bootloader mode and flash twrp
3. Boot in to Twrp
4. Format data by typing yes
5. Wipe everything
6. Flash rom.zip
7. Now tap on reboot and tap on recovery now your phone reboots in to twrp again
8. Tap on reboot and check your current active slot.
Example - if twrp shows current active slot A change to B if B change to A
9. Now flash Gapps.zip
10. Now flash Perf-Stock-9.0-DDV_sprout.zip
11. Wipe all except system & vendor
10. Tap on reboot bootloader
11. Now your phone boots in to bootloader mode
12. Now open cmd in pc flash vbmeta using this command
for slot-a > fastboot flash vbmeta_a --disable-verity --disable-verification vbmeta.img
for slot-b> fastboot flash vbmeta_b --disable-verity --disable-verification vbmeta.img
( thanks to @singhnsk for this step )
13. now type fastboot reboot
and wait for 3 min rom will boot up
Credits
* LineageOS & CO (For Source Code)
* All the authors in my git sources
* Nokia For Prebuilt Vendor & Kernel Source
* Moderators (For Giving Freedom To Post Threads)
* My entire Nokia 7.2 community Thank you all for your massive support Again
Join Nokia 7.2 Community
Download Rom
Download Stock Pie kernel
Download vbmeta
Download Gapps
Download Official Twrp
Android OS version: 9.0.0_r46
Security patch level: October 2019
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/LineageOS
Whats working?
Ril
Wifi
Mobile data
Double tap to wake
Double tap to sleep
Adaptive brightness
Dark theme
Ambient display
Flash light
Sound / vibration
Camera
Volte
Selinux - permissive
Fingerprint
Known issues
All fixed for now . comment below if you face any bugs
FLASH GAPPS MANUALLY
Awesome work.. Great work..!
Thank you. Works good
Works like a charm!! ????
This is just awesome. Thanks for being that fast!
I ordered a Nokia 7.2 as business phone. First thing I'll do is unlock and flash this rom. Wouldn't have ordered without LOS support.
How is the battery life compared to stock? Somebody who is currently using this, could someone pls let know about this? Thanks.
Hey! I guess I messed up... bootloader is unlocked but when I tried to flash with TWRP, for any reason I still having the "original" boot running and now I have no wifi... Any one can provide me a guidance?
JoSoFer said:
Hey! I guess I messed up... bootloader is unlocked but when I tried to flash with TWRP, for any reason I still having the "original" boot running and now I have no wifi... Any one can provide me a guidance?
Click to expand...
Click to collapse
Here twrp file will perform as two ways
Boot & twrp
If you know what exactly a/b partition phone does you won't get this doubt.
Do you HAVE to flash Gapps if you dont want them?
Talon Pro said:
Do you HAVE to flash Gapps if you dont want them?
Click to expand...
Click to collapse
Why? I have been using LineageOS on different devices without Gapps for years. So there is no need to flash them if you don't want them.
Ungewiss said:
Why? I have been using LineageOS on different devices without Gapps for years. So there is no need to flash them if you don't want them.
Click to expand...
Click to collapse
Just checking, oddly, Android is new to me...
Do we need or can we lock the bootloader after to keep the warning showing every time you reboot?
---------- Post added at 10:23 AM ---------- Previous post was at 10:04 AM ----------
BUG- Double tap to wake not working, the slider is set to ON. I tried turning it off and back on and rebooting the phone and that didnt work on this ROM.
Talon Pro said:
Do we need or can we lock the bootloader after to keep the warning showing every time you reboot?
Click to expand...
Click to collapse
Hi, please understand how bootloaders work. The locked bootloader ensures that secure boot is in place and the device will deny to boot if it notes any tampering from the OEM's hashes. So, never lock the bootloader on a custom software - the device will more or less become a brick ?
singhnsk said:
Hi, please understand how bootloaders work. The locked bootloader ensures that secure boot is in place and the device will deny to boot if it notes any tampering from the OEM's hashes. So, never lock the bootloader on a custom software - the device will more or less become a brick
Click to expand...
Click to collapse
All you had to say was "no".
Talon Pro said:
All you had to say was "no".
Click to expand...
Click to collapse
I just tried to explain it a bit.
nvm
Any idea on the DTTW issue?
Will this ROM become official?
BigFatTony said:
Will this ROM become official?
Click to expand...
Click to collapse
Not even interested to follow their rules & regulations towards official tag. Due to i don't know when i will do builds. & I don't know when i will update or bug fixes. completely depends on my schedule So not interested towards official tag & also iam not ready to follow their rules as well.
Main reason - my schedule and my infra
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Nokia 7.2 [Daredevil]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 9.0
Whats working?
Ril
Wifi
Mobile data
Double tap to wake
Double tap to sleep
Adaptive brightness
Dark theme
Ambient display
Flash light
Sound / vibration
Camera
Volte
Fingerprint
Known issues
comment below if you face any bugs
DON'T FLASH GAPPS, ALREADY INCLUDED
Installation procedure
Note - I don't recommend you people to flash any other custom kernels on this ROM untill Nokia release kernel sources. Because this ROM supports only stock kernel .
1. Download Rom.zip , Perf-Stock-9.0-DDV_sprout.zip , twrp.img & vbmeta.img
2. power off your phone boot in to bootloader mode and flash twrp
3. Boot in to Twrp
4. Format data by typing yes
5. Wipe everything
6. Flash rom.zip
7. Now tap on reboot and tap on recovery now your phone reboots in to twrp again
8. Tap on reboot and check your current active slot.
Example - if twrp shows current active slot A change to B if B change to A
9. Now flash Perf-Stock-9.0-DDV_sprout.zip
10. Wipe all except system & vendor
11. Tap on reboot bootloader
12. Now your phone boots in to bootloader mode
13. Now open cmd in pc flash vbmeta using this command
for slot-a > fastboot flash vbmeta_a --disable-verity --disable-verification vbmeta.img
for slot-b> fastboot flash vbmeta_b --disable-verity --disable-verification vbmeta.img
( thanks to @singhnsk for this step )
14. now type fastboot reboot
and wait for 3 min rom will boot up
Credits
* Pixel Experience & CO (For Source Code)
* All the authors in my git sources
* Nokia For Prebuilt Vendor & Kernel Source
* Moderators (For Giving Freedom To Post Threads)
* My entire Nokia 7.2 community Thank you all for your massive support Again
Join Nokia 7.2 Community
Download Rom
Download Stock Pie kernel
Download vbmeta
Download Official Twrp
Android OS version: 9.0.0_r47
Security patch level: November 2019
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/PixelExperience
reserved
I was going to give this a go and see how folks liked it. Any feedback yet?
jumpup said:
I was going to give this a go and see how folks liked it. Any feedback yet?
Click to expand...
Click to collapse
I used it for about an hour and it felt snappier than stock
I'm now having the infamous issue where the Wifi toggle switch. When Wifi is enabled, it immediately disables.. I believe this is because I need to perform another session following instructions to the absolute letter.
Fortunately, I always make a TWRP image along with Titanium Backup sets, copied externally, before testing.
Is there any reliable means to resolve this pervasive wifi bug?
jumpup said:
I'm now having the infamous issue where the Wifi toggle switch. When Wifi is enabled, it immediately disables.. I believe this is because I need to perform another session following instructions to the absolute letter.
Fortunately, I always make a TWRP image along with Titanium Backup sets, copied externally, before testing.
Is there any reliable means to resolve this pervasive wifi bug?
Click to expand...
Click to collapse
I'm having this same wifi issue with stock image. It has appeared since September update. Also faced same kind of problem with bluetooth but it disappeared after December update.
Richard Lamm said:
I'm having this same wifi issue with stock image. It has appeared since September update. Also faced same kind of problem with bluetooth but it disappeared after December update.
Click to expand...
Click to collapse
I've found a method to permanently resolve it, so long as the modified monthly image matches that of the ROM. Let me know if you'd like a write-up.
jumpup said:
I've found a method to permanently resolve it, so long as the modified monthly image matches that of the ROM. Let me know if you'd like a write-up.
Click to expand...
Click to collapse
The issue dissappeared for now after Google's security patch for January 2020 (build 00WW_1_400). Hope so that it won't come back:fingers-crossed:
doubts of installing
I am planning to install this Pixel Experience ROM to my Nokia 7.2, i just want to know the latest info about the ROM like today, cuz i'm having doubts to install it, maybe cuz it will not run or work properly (newbie to this kind of thing)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExtended ROM for Poco F3/Mi11X [alioth]
What is this?
PixelExtended ROM (or PEX for short), aims to combine Pixel goodies with some essential features missing in Pixel Experience, delivering a ROM that promises you stabilty and a large amount of features at the same time. The ROM will keep it's Pixel ideologies it's primary focus and wont stray into the dark and deep void that is bloat.
Our mission is to offer maximum possible stability and security along with essential and useful features for proper functioning of a device.
Based on Android 12 (S)
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
NFC
Lights
Sound/Vibration
Known issues
You tell me
Features That are Available At the Moment
Volte icon
Show 4G instead of lte
And more
As only Essesntial Features will be added so this list will updated whenever there is a new feature
NOTE :- All possible features are toggleable so you always can choose to be stockish.
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from Sourceforge Host
Donate
Liked my work? Gift me a beer
Liked my work? Gift Aryan a beer
Stay tuned
Device Support Group
NOTE: 4.5 IS BASED ON FW 13.0.2 AND IT IS ALREADY INCLUDED IN ROM ZIP NO NEED TO FLASH SEPARATELY .
Android OS version: 12.1
Security patch level: May 2022
Build author/Device Maintainer: Rounak1619
Kernel Source code: https://github.com/Rounak1619
Source code: https://github.com/PixelExtended
PixelExtended Developer: Aryan Gupta
How to Flash PEX 4.5
Twrp method :
• Boot to skkk TWRP
• Flash Rom with TWRP inject
• Reboot to recovery
• Format data
• Reboot to system
Flash boot and vendor_boot method
Commands: 1)flasboot flash boot boot.img
2) fastboot flash vendor_boot vendor_boot.img
3)fastboot reboot recovery
4) Format data
5) choose update from adb
6) adb sideload filname.zip
7)reboot
8)Enjoy
NOTE: 4.5 IS BASED ON FW 13.0.2 AND IT IS ALREADY INCLUDED IN ROM ZIP NO NEED TO FLASH SEPARATELY .
1 more
downloading
Good Morning, can i flash the Rom without TWRP? Any Instructions? Thank you so much.
Flash boot and vendor_boot method
Commands: 1)flasboot flash boot boot.img
2) fastboot flash vendor_boot vendor_boot.img
3)fastboot reboot recovery
4) choose update from adb
5) adb sideload filname.zip
6)reboot to recovery format data
7)reboot
"Ok google" working?
dirtytwo said:
Flash in twrp if coming from A11
Or
Flash boot and vendor_boot method
Commands: 1)flasboot flash boot boot.img
2) fastboot flash vendor_boot vendor_boot.img
3)fastboot reboot recovery
4) choose update from adb
5) adb sideload filname.zip
6)reboot to recovery format data
7)reboot
Click to expand...
Click to collapse
Thank you.
screenshots?
dirtytwo said:
Flash in twrp if coming from A11
Or
Flash boot and vendor_boot method
Commands: 1)flasboot flash boot boot.img
2) fastboot flash vendor_boot vendor_boot.img
3)fastboot reboot recovery
4) choose update from adb
5) adb sideload filname.zip
6)reboot to recovery format data
7)reboot
Click to expand...
Click to collapse
Which Flash boot and vendor_boot should be used?
11214 said:
Which Flash boot and vendor_boot should be used?
Click to expand...
Click to collapse
Check 1st reply
rounak1619 said:
Check 1st reply
Click to expand...
Click to collapse
Brilliant, excellent work.
Thank you.
how to install twrp to this rom now?
Fast charging enabled ? Also there is a bug in VoLTE icons..
Any video or audio keeps stopping for a second or two and starts again.
Anyone else have this issue?
Edit 1: Just thinking I just flashed over arrow os 12.
Then I flashed the boot, vendor and the ROM zip.
Perhaps I did that wrong some how.
Edit 2: I just deleted everything and flashed again and it's perfect.
Is Android Auto functioning on this ROM? I'm contemplating on purchasing this phone.
dirtytwo said:
Flash in twrp if coming from A11
Or
Flash boot and vendor_boot method
Commands: 1)flasboot flash boot boot.img
2) fastboot flash vendor_boot vendor_boot.img
3)fastboot reboot recovery
4) choose update from adb
5) adb sideload filname.zip
6)reboot to recovery format data
7)reboot
Click to expand...
Click to collapse
I am on casanova mimax (a11), you think just flashing rom zip from twrp and then rebooting and formating data would work ?
I've had bad experiences from fastboot flashes / sideloads and would like to sitck to twrp if possible. did someone actually flashed this rom from twrp coming from a miui rom ?
Edit : FYI, I've managed to install from twrp (dunno if it was vasi or nebrassy) by wiping data, installgin from usb otg, wiping data again (never know if it is best before or after) and rebooting. First boot was really fast, and initial setup went great restoring my google backup from yesterday made from miui. just a few stuff not working for me like double pressing power button to launch camera. Also no face unlock, and I didn't find how to remove navigation pill at the bottom of the screen (advice would be appreciated).
Also phone storage is not detected under windows 10 whereas it was with previous miui rom.
Otherwise rom is reeeeally smooth and pleasant to use !
Here are some screenshots of the ROM, this one supports Material You completely and it's been perfect so far.
Steps to flash over arrow Os 12??
So far this rom is AWESOME, the battery consumption is great, pixel implementation are there and magisk works without any hassle.
Thank you for your awesome work @rounak1619!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
crdroid_features/README.mkdn at 12.1 · crdroidandroid/crdroid_features
our main features (why you love us). Contribute to crdroidandroid/crdroid_features development by creating an account on GitHub.
github.com
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
flash crDroid recovery like every other recovery on this phone
Format data
Flash the ROM zip either from adb sideload or internal storage
Reboot in to recovery
Format data
Flash GApps (If wanted)
Reboot and enjoy!
Update installation:
Reboot to recovery
Flash the ROM in twrp or use adb sideload
Reboot and enjoy!
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_motorola_deen
Download:
ROM https://crdroid.net/deen
Changelog: https://crdroid.net/deen/8#changelog
Known issues:
- Dolby broken
- Adb sideload
- Ota Update
- You tell me
Visit official website @ crDroid.net
crDroid Deen Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
20220810
- ADB: Wireless debugging: turns off frequently
- ADB: Wireless debugging: No debuggable process in Android Studio (but other devices works OK); App Inspection & Profiler not working
- ADB: Enable USB debugging -> device restarts (kernel panic?)
In the Logcat I got something like this:
Code:
I/adbd (533): opening control endpoint /dev/usb-ffs/adb/ep0
E/adbd (533): failed to write USB strings: No such device
20220807
- UPDATE: OTA: not working 20220807->20220810: Could not change profiles (https://paste.crdroid.net/J4u9b6). Is it a problem with permissions or problems caused by Magisk's changes into the system?
- UPDATE: sideload update 20220807->20220810 infinity boot loop with Magisk (without Magisk no problem)
- GAPPS: Device is not certified by Google (to solve this problem just follow: https://www.google.com/android/uncertified/)
But this ROM is still awesome! Thank you so much.
I'm trying to fix the root and debug issues
This looks awesome. I'm waiting for the new display to arrive and I'm rocking this phone back. Would this rom enable VoWifi? Or does it need certain hardware for vowifi?
Will come a Version in near future, that has no issues with OTA functionality?
Last 2 updates did not work with OTA. In Telegram Group Deen Brasil was mentioned, that a server is needed to make twpr download possible, before update is installed, cause there is no recovery patition.
Is there not way to add a recovery pation?
Hi their I was wondering when flashing this rom are these steps required? Like the pixel ROM for the Deen:
1. Download Rom
2. Download TWRP
3. fastboot getvar all
4. fastboot boot twrp
5. Do full wipe
6. Format Data
7. Flash ROM
8. Reboot to Bootloader
9. fastboot getvar all
10. If fastboot getvar all (current-slot label) from step 3 equals this from step 9 change the slot to opposite, if a then b if b then a, command is fastboot --set-active=SLOT
11. Boot to TWRP again
13. Flash Magisk (optional)
14. Reboot to system
I tried booting into recovery but i got this error
Edit : That was a long time ago.
tldr - im stupid and didnt unlock the bootloader properly.
Tobyash said:
I tried booting into recovery but i got this error View attachment 5744289
Click to expand...
Click to collapse
Looks like your bootloader is locked.
baseline2016 said:
Looks like your bootloader is locked.
Click to expand...
Click to collapse
Well thats what it seems at first look, but i have the bootloader unlocked. And i checked a few times to be sure.
Tobyash said:
Well thats what it seems at first look, but i have the bootloader unlocked. And i checked a few times to be sure.
Click to expand...
Click to collapse
Maybe you have to run the command in Windows as an administrator. And the command is fastboot boot recovery c:/....img
I followed the steps I mentioned in my post #6 and the ROM works excellent.
How do you update with twrp? It gives me error no matter what slot I choose. CrDroid recovery or OTA doesn't work.
there is a problem, the microphone is recording very low audios, with this crdroid rom.
Hello,
Gapps link is broken. I tried NikGapps but it stuck my boot...
Could you please fix the link?
Thanks in advance!
EDIT:
Found it here, just in case anyone is wondering:
Release Squeak Releases · ChonDoit/TheGappsInstaller
20220607 | Merged June changes | Unified some Overlays | Updated apns list
github.com
I just installed the latest update 2022-12-19 but unfortunately I hear an echo when I'm in a phone call.
Also echo when calling with Signal or Telegram.
Am I the only one?
whats-in-a-name said:
I just installed the latest update 2022-12-19 but unfortunately I hear an echo when I'm in a phone call.
Also echo when calling with Signal or Telegram.
Am I the only one?
Click to expand...
Click to collapse
Solved by installing stock and from there installing lineage-18.1-20220523-UNOFFICIAL-deen.zip
Hi. I'm trying to build a user version of your rom. The build works but I get an error during update (sideload). This happens at the end, after the vendor is flashed and during `Running backuptool scripts`
Code:
Update_engine_sideload [ERROR: postinstall_runner_action.cc] Failed to set backuptool context
I wonder why this could be ? Perhaps I have not reconstructed your manifest correctly?
note: I'm flashing from Recovery using a USB UTG stick and also flashing from TWRP using the same stick..
I have been using the Motorola One with this rom as my main phone for the past day or two, so far ive been enjoying it! Im hoping for more updates in the future.
Good afternoon,
I wanted to share with you my experience trying to install rom 20230414 for the Moto one tx 1941-3.
Although I was able to install and use the previous version without problems, it was impossible for me with this latest version since it stuck to the android logo. It doesn't flash or reset, it just stays there.
I find this system incredible so I would love to use the update
Thank you