Hey guys,
Got my hands on the SGP Stehen leather case, which is a folio style case made from plastic and leather. This case features a leather flap for screen protection that can be turned into a viewing stand, which is fantastic. You'll get great protection from this one, since the leather and plastic combination is very shock absorbant.
Check out the full review below for more info;
Otterbox’s mid-level Commuter case protects your device from bumps and drops. The included screen protector ensures your screen will stay in mint condition. The Commuter consists of of soft rubber inner layer, and a smaller, hard plastic shell. This dual layer case and screen protector can be yours for only $35.
I have the Bamboo swap style back on my OPO and don't want to cover it. I do want to add some protection to the chrome bezel. Are there any good bumper cases out there? I have only seen the aluminum bumper cases which I feel would do the opposite ad actually scratch the bezel. Are there any TDU or silicone bumper cases available for the One+?
I own a OnePlus One with the Bamboo back and as most people already know, it's actually quite thicker than the normal sandstone black and silk white backs and also a bit heavier. Because of this, most cases won't fit. I already tried putting on a naked clear case but my phone was too thick. Hopefully others with the Bamboo back could post here what cases would fit so we can put together a sort of list of confirmed cases that fit the Bamboo OPO.
kylethelife said:
I own a OnePlus One with the Bamboo back and as most people already know, it's actually quite thicker than the normal sandstone black and silk white backs and also a bit heavier. Because of this, most cases won't fit. I already tried putting on a naked clear case but my phone was too thick. Hopefully others with the Bamboo back could post here what cases would fit so we can put together a sort of list of confirmed cases that fit the Bamboo OPO.
Click to expand...
Click to collapse
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
nicholaschum said:
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
Click to expand...
Click to collapse
Wow! That's solid helpful. The one I wanted to get but didn't fit when I tried it on was the Bepak Slim Transparent Case so stay away from that if you've got the bamboo. I really wanted a clear case coz I didn't want to cover the Bamboo but after trying the Bepak case I didn't think any slimfit clear case would fit. Glad to hear the Ringke Fusion Case fits! Do you have the clear one? I think I might just order one.
nicholaschum said:
I was debating to open a thread for this too, but here, I have these cases:
6x Aluminium Bumper Case (no SIM slot)
4x Ringke Fusion Case
2x Orzly Fusion "Bumper" Case
1x TUDIA Slim Fit Dual-Layer Cygen
1x TUDIA Ultra Slim LITE TPU Bumper
1x Diablo Jkase Rugged Case
Aluminium Bumper Case: I wouldn't use these because I don't want to damage the plastic on the side of the phone, as well as get my bamboo scratched. But it does fit, screws require a bit more pressure for locking in, which brings me to my original point, I don't want to damage the orange-ish plastic.
Ringke Fusion Case: I'm using this on my Daily Driver OnePlus One (Bamboo) atm, as well as my developer OnePlus One (sandstone) - I love these cases, it feels so high quality and fits around the device well. As you can see, I have 4 because two of them were the first batch which were quite loose.
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
TUDIA Slim Fit Dual-Layer Cygen: Fits, but as usual the flaws are that the hard plastic does not align properly with the TPU is more obvious than on the Sandstone. Bad first batch, but not for everyone - as the manufacturing line is different.
TUDIA Ultra Slim LITE TPU Bumper: I have the clear version to show off the back. It looks good, and fits very well. As usual, clear displays the bamboo design quite well.
Diablo Jkase Rugged Case: It was a rather "loose" case to begin with, so it fits well with the bamboo styleswap/bamboo device. However, why would you buy a case to cover your bamboo anyways?
Click to expand...
Click to collapse
Sorry, can I just confirm, is the Aluminium Case you mention first the one by kwmobile/KW-Commerce? And, if it is, you say you wouldn't choose it because of potential scratching, but do you think it's still a good case in that it protects the screen from being damaged?
TheMurphmeister said:
Sorry, can I just confirm, is the Aluminium Case you mention first the one by kwmobile/KW-Commerce? And, if it is, you say you wouldn't choose it because of potential scratching, but do you think it's still a good case in that it protects the screen from being damaged?
Click to expand...
Click to collapse
Yeah because that case is actually already very snug on the sandstone version of the OnePlus, with the added thickness at the back, it will scrape along the plastic and the bamboo (I had a lot of experience with aluminium bumpers with added thickness battery covers (Note 3 + Al bumper + Al battery cover) and the battery cover was scratches so much). It will protect your screen somehow (I did drop my sandstone OPO with a tempered glass on solid concrete and it was perfectly fine)
nicholaschum said:
Yeah because that case is actually already very snug on the sandstone version of the OnePlus, with the added thickness at the back, it will scrape along the plastic and the bamboo (I had a lot of experience with aluminium bumpers with added thickness battery covers (Note 3 + Al bumper + Al battery cover) and the battery cover was scratches so much). It will protect your screen somehow (I did drop my sandstone OPO with a tempered glass on solid concrete and it was perfectly fine)
Click to expand...
Click to collapse
Thanks for the information; think I'll give that one a miss then and go for the Tudia Ultra Slim instead
nicholaschum said:
Orzly Fusion "Bumper" Case: Rubbish. It doesn't shape around the edges of the phone and the lips of the "lay-on-the-table" design is so loose, I'd toss these out if I were you.
Click to expand...
Click to collapse
strongly disagree. I'd recommend Orzly Fusion bumper case. The fit is perfect, not too tight. Fits perfectly round the edges and definitely not loose on the 'lay-on-the-table' part. I also own Ringke & Diztronic.
Im pretty sure u got a bad batch of the Orzly, or maybe an early batch...
Sagar4995 said:
strongly disagree. I'd recommend Orzly Fusion bumper case. The fit is perfect, not too tight. Fits perfectly round the edges and definitely not loose on the 'lay-on-the-table' part. I also own Ringke & Diztronic.
Im pretty sure u got a bad batch of the Orzly, or maybe an early batch...
Click to expand...
Click to collapse
I would not, my two cases I ordered one month apart are exactly what KP Smith said in a comment here:
https://plus.google.com/u/0/app/basic/stream/z13awxcpole1eh1tf22uihs51zrfd3ssp
Sent from my Nexus 6 using Tapatalk VIP
Vassy's One+
Thank you for doing this review. Your post makes me want to try the TUDIA Ultra Slim LITE TPU Bumper.
Saw this review on it.
youtu.be/cd1O8LdeGUo
my diztronic tpu slim cases fit pretty good as well. you put them on like you would with the regular back then just run your fingers around the edges and it falls right into place. I have 4 different colors from different batches and all fit fine. I also have the ringke fusion.. its actually on my phone right now. Its got the clear back and tinted sides. Fits 99.9% perfectly! Its my go to case for sure.
This case is grippy? good protection?
better than Spigen Neo hybrid?
Depends on which official case you get. The sandstone is grippy/gritty like other OnePlus sandstone products. The rosewood is the only wood case I've used. It feels like laminate floors and doesn't provide much grip. The Karbon (my favorite) feels like soft touch plastic and adds some extra grip.
The Spigen neo hybrid is fine but I prefer the official Karbon case since it's less bulky and has a nicer feel. The downside of the official cases is they don't cover the top or bottom edge of the phone and don't create much of a lip on the front. The RhinoShield Crash Guard is a good minimal option that will protect the phone from drops on flat surfaces.