Hi guys, need some help here.
Trying to get the CM 7.2 installed on my Verizon R800x. I updated the firmware to .89 (had to relock by bootloader to do so). I then tried to do the fastboot flash boot boot.img and got the kernel to load, but now when I try to install the update.zip from the CWM download I get the following. I unlocked my bootloader again (using the original method from ashergray like fastboot -i oem unlock 0xfce... etc) and tried again. Same result. Any ideas?
CWM-based Recovery v5.0.2.7-nAa-r2
-- Installing: /sdcard/update.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "R800x" || getprop("ro.build.product") == "R800x" || ("ro.product.board") == "R800x" || ("ro.product.device") == "zeusc" || getprop ("ro.build.product") == "zeusc" || getprop(ro.product.board") == "zeusc"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
Found the answer in
http://forum.xda-developers.com/showpost.php?p=21721347&postcount=147
Just waiting for my Market to start downloading things so I can edit the file
I've got a nasty problem on my Sprint Gnex. Every time I boot into recovery and tell it to flash a .zip file, it returns this:
Code:
-- Installing (whatever).zip
Finding update Package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "toroplus" || getprop("ro.build.product") == "toroplus"
E:Error in (whatever).zip
I have this problem in CWM and CWM Touch as flashed by ROM Manager. I've tried to edit my build.prop file to say either toroplus or torospr, but neither setting works. It doesn't matter what zip I use, they all die here.
I can back up and restore using nandroid, so what's broken and how do I fix it?
Try flashing the toroplus CWM image via fastboot: http://download.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.3.1-toroplus.img
That did it! Thanks!
Hey everyone,
I'm currently trying to install the latest CM10 FXP131 ROM on my Arc S Lt18i. I flashed my phone to the first ICS Stock ROM by Sony and rooted it to install CWM Recovery.
Now, the next step was to flash the ROM. So I downloaded the Anzu version of the ROM, copied it to my SD and changed into Recovery mode. I picked "install zip from sdcard" and chose the ZIP I've just downloaded.
But instead of installing the ROM I got a error every time. It says
E:Error in /sdcard/cm-10-20120731-UNOFFICIAL-anzu.zip
(Status 7)
Installing aborted
Can someone help me to finally install the ROM?
Thank you so much,
Max
You also need to install the kernel.
Something like this a few lines above?
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18I" || getprop("ro.product.board") == "LT18i"
T-119a said:
Something like this a few lines above?
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18I" || getprop("ro.product.board") == "LT18i"
Click to expand...
Click to collapse
Nope, this is the full protocol:
Finding update package...
Opening update package...
Installing update...
set_perm: some changes failed
E:Error in /sdcard/cm-10-20120731-UNOFFICIAL-anzu.zip
(Status 7)
Installation aborted.
Just for information. The first thing I've done after installing CWN was straight installing the .zip . I did not flashed the kernel or wipe. Maybe that has something to say?
EDIT: Oh, and after every try to install the ROM my phones hangs up at the "SONY" logo and won't boot. I always have to flash the original sony .ftf to make it run again :/
Thank you,
Max
Open the cm-10-20120731-UNOFFICIAL-anzu.zip with a zip viewer, extract the boot.img and flash it via fastboot. Then perform a Full Wipe and try to flash the ROM again.
T-119a said:
Open the cm-10-20120731-UNOFFICIAL-anzu.zip with a zip viewer, extract the boot.img and flash it via fastboot. Then perform a Full Wipe and try to flash the ROM again.
Click to expand...
Click to collapse
I will try that, but I need a unlocked bootloader for that all, right? Or isn't that necassary at all?
maexjen said:
I did not flashed the kernel or wipe. Maybe that has something to say?
Click to expand...
Click to collapse
Yep.
maexjen said:
I will try that, but I need a unlocked bootloader for that all, right? Or isn't that necassary at all?
Click to expand...
Click to collapse
If you want to flash cyanogen you have to unlock your bootloader. An unlocked bootloader is recommend for flashing custom Roms and kernels.
Thank you for your clarification! It's working now! =)
T-119a said:
Something like this a few lines above?
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18I" || getprop("ro.product.board") == "LT18i"
Click to expand...
Click to collapse
Hello... I'm flashing new ROM and facing Status 7 error with what you said at the front... Here's the error message:
assert failed: getprop ("ro.product.device") == "c8812" | | gerprop ("ro.build.product") == "c8812" | | getprop ("ro.product.device") == C8812 "| | getprop (" ro.build.product ") ==" C8812 "
E: Error in / sdcard/C8812_20120822005.zip
(Status 7)
Installation aborted.
Can I know the cause of this and how to overcome that? Please & Thanks!
I'm getting this exact same problem on my Arc S except with cm10 Fxp138. My bootloader is unlocked, im rooted, i flashed the kernel first and STILL i get Status 7 error installation aborted. If someone could help, that'd be great
I am also getting the same error but on Sony LWW with Pacman JB ROM.
I also got this status 7 error with the code "Status 7 - symlink: some symlinks failed".
After deleting the first line (before the ; sign) I could get the rom to install.
I would like to know, why / how this can happen... Maybe flashing a false kernel or other things?
I think maybe binary and script don't match each other; or maybe there's error in text of script
(sorry for my bad english)
try to flash the kernel lupus
Firstly, give us recovery log. Secondly, I had such an issue with CM7.1 quite long time ago. I've fixed it by changing phone's ID from LT18i to LT15i via fastboot. There's a proper command for it.
1. Go to CWM
2. Plug phone
3. "adb pull tmp/recovery"
WHAT ?
Try a full wipe ( data , cache )
CM10 on my ARC
I have the same, install new baseband upper then 70 or official ics 4.0.4 then use flashtools to install kernel and flash rom
You have unlocked bootloader ??
i have "Status 7 - symlink: some symlinks failed" when i try install Jelly-v4.zip. anyone help me, i have downloaded that rom 3 times but it can't help
meinmain said:
Hello... I'm flashing new ROM and facing Status 7 error with what you said at the front... Here's the error message:
assert failed: getprop ("ro.product.device") == "c8812" | | gerprop ("ro.build.product") == "c8812" | | getprop ("ro.product.device") == C8812 "| | getprop (" ro.build.product ") ==" C8812 "
E: Error in / sdcard/C8812_20120822005.zip
(Status 7)
Installation aborted.
Can I know the cause of this and how to overcome that? Please & Thanks!
Click to expand...
Click to collapse
I had a lot of frustration with this. Had many attempts. The only thing that seemed to work for me was to flash the doomlord kernel. Then it worked perfectly.
I have searched forums and tried all the fixes listed.
My CWM recovery is 6.0.1.5 - the newest i can find.
I rooted and running stock Rogers (I'm a canadian rogers user)
I have downloaded multiple times (using the net and file transfer/Rommanager/and directly to my sdcard (internal and external):cm-10.0.0-d2att.zip (i would like to run the stable version rather than a nightly until i am used to it)
I always wipe data as well i have tried wiping the cache and dalvik cache as well
and still every time I try to install CM 10 on my phone, it just says:
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.build.product") == "d2att"
assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.build.product") == "d2att"
E:Error in /sdcard/cm-10.0.0-d2att.zip
(Status 7)
The complete and total log from when i installed using RomManager is also something i can post if needed?
CWM 6.0.1.5 is not the one you should be using. You need CWM 6.0.1.4 for the sgs3 att.
Try using twrp
check this out I had the same issue on telus
http://forum.xda-developers.com/showpost.php?p=30331732&postcount=2
hope that helps
mrhaley30705 said:
Try using twrp
Click to expand...
Click to collapse
TWRP did the trick. thanks everyone!
When installing sakura rom to sakura_india boot fails and goes to recovery. if you want to boot up normally you have flash rom in fastboot mode.
Is it possible to convert sakura_india to sakura version completely?
Edit this line updater script to install ROM
getprop("ro.product.device") == "sakura_india" || abort("E3004: This package is for "sakura_india" devices; this is a "" + getprop("ro.product.device") + "".");