[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
Moto G8 Play
Please feel free to share issues, questions and offer help. Noob questions are welcomed.
It is always best to use the Thanks button , in lieu of simply posting "Thank you".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please keep discussion focused, on questions pertaining to this Device
List of supporters...
...
...
...To those seeking help: Please don't bombard the supporters with PMs asking for help. Instead, ask your question here in the thread so others can benefit from the solution to your problem as well. If you want to be sure someone particular gets notified of your question, put his / her username directly after an @.
If you have ROM related questions, post in the relevant ROM Q&A thread (if there is one) or directly in the ROM development thread. Thank you!
Supporters: If you want to be put on or off the list, just make a request here in the thread!
Before posting anything, I strongly advise you to read
Forum Rules
[GUIDE] - XDA New User Guide - Getting started on XDA
XDA Tour
FAQs for Device Thread link
Index for Device Thread Link
Please look for a similar thread when visiting another device forum.
If you would like to create a [Help Thread] please Click Here.
I'm not planning on adding every Rom or Mod,
but if you have a suggestion for other links
Please post them here.
FAQs
UnLocking the Bootloader
ReLocking the Bootloader
[Fixing] Baseband <not found> / IMEI=0 / No Network After Flash / Issues
Fixing your Moto stuck in Qualcomm QHSUSB_Bulk or qloader mode
Unfortunately LMSA doesn't work with G8 Play -14 April 2020
[*]Using Lenovo's MOTO Smart Assistant to Update/Repair/Backup
Custom Roms/Recovery/Root/
Firmware
Firmware should be avalible here
https://mirrors.lolinet.com/firmware/moto/
Specs
Help Please !
Hi to everyone, i've seen all the guides you post but i cant find the correct frimware for my moto g8 play, i have tried a few lima pmds 99.70-81-5 but anything seems to work :c, also i havent unlocked OEM so i need to install the same firmware version to unbrick it :c, can anyone help me to find the correct one? Thanks for all your guides !
version: 0.5
version-bootloader: MBM-2.1-lima_32_retail-210600d2e-200306
product: lima
board: lima
secure: yes
hwrev: PVT
radio: 2
storage-type: eMMC
emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=00 M8=12
cpu: MT6771V/WL
serialno: ZY2274B5F3
cid: 0x0032
channelid: 0x0a
uid: 64D5498EF4027FFC000000000000
securestate: oem_locked
factory-modes: disabled
iswarrantyvoid: no
max-download-size: 268435456
reason: No bootable A/B slot
imei: 359100103691791
imei2:
meid:
date: 12-07-2019
sku: XT2015-2
carrier_sku: XT2015-2
battid: SB18C51711
iccid:
max-sparse-size: 268435456
current-time: "Tue Jan 1 1: 4:28 UTC 2019"
ro.build.fingerprint[0]: motorola/lima_32/lima:9/PMDS29.70-
ro.build.fingerprint[1]: 81-5/1fa4a:user/release-keys
poweroffalarm: 0
ro.build.version.full[0]: Blur_Version.29.201.7.lima_32.ret
ro.build.version.full[1]: ail.en.US
ro.build.version.mtk: alps-mp-p0.mp1.tc2sp-V1.47
version-baseband: <not found>
kernel.version[0]: Linux version 4.4.146+ ([email protected]
kernel.version[1]: 159) (gcc version 4.9.x 20150123 (prerel
kernel.version[2]: ease) (GCC) ) #1 SMP PREEMPT Thu Jun 25
kernel.version[3]: 08:09:39 CDT 2020
frp-state: protected (144)
ro.carrier: tefmx
current-slot: a
running-boot-lun: 0
running-slot: _a
slot-successful:_a: no
slot-successful:_b: no
slot-bootable:_a: no
slot-bootable:_b: no
slot-retry-count:_a: 0
slot-retry-count:_b: 0
slot-suffixes: _a,_b
slot-count: 2
pcb-part-no: SB28C70228
all: listed above
strako777 said:
Hi to everyone, i've seen all the guides you post but i cant find the correct frimware for my moto g8 play, i have tried a few lima pmds 99.70-81-5 but anything seems to work :c, also i havent unlocked OEM so i need to install the same firmware version to unbrick it :c, can anyone help me to find the correct one? Thanks for all your guides !
version: 0.5
version-bootloader: MBM-2.1-lima_32_retail-210600d2e-200306
product: lima
board: lima
secure: yes
hwrev: PVT
radio: 2
storage-type: eMMC
emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=00 M8=12
cpu: MT6771V/WL
serialno: ZY2274B5F3
cid: 0x0032
channelid: 0x0a
uid: 64D5498EF4027FFC000000000000
securestate: oem_locked
factory-modes: disabled
iswarrantyvoid: no
max-download-size: 268435456
reason: No bootable A/B slot
imei: 359100103691791
imei2:
meid:
date: 12-07-2019
sku: XT2015-2
carrier_sku: XT2015-2
battid: SB18C51711
iccid:
max-sparse-size: 268435456
current-time: "Tue Jan 1 1: 4:28 UTC 2019"
ro.build.fingerprint[0]: motorola/lima_32/lima:9/PMDS29.70-
ro.build.fingerprint[1]: 81-5/1fa4a:user/release-keys
poweroffalarm: 0
ro.build.version.full[0]: Blur_Version.29.201.7.lima_32.ret
ro.build.version.full[1]: ail.en.US
ro.build.version.mtk: alps-mp-p0.mp1.tc2sp-V1.47
version-baseband: <not found>
kernel.version[0]: Linux version 4.4.146+ ([email protected]
kernel.version[1]: 159) (gcc version 4.9.x 20150123 (prerel
kernel.version[2]: ease) (GCC) ) #1 SMP PREEMPT Thu Jun 25
kernel.version[3]: 08:09:39 CDT 2020
frp-state: protected (144)
ro.carrier: tefmx
current-slot: a
running-boot-lun: 0
running-slot: _a
slot-successful:_a: no
slot-successful:_b: no
slot-bootable:_a: no
slot-bootable:_b: no
slot-retry-count:_a: 0
slot-retry-count:_b: 0
slot-suffixes: _a,_b
slot-count: 2
pcb-part-no: SB28C70228
all: listed above
Click to expand...
Click to collapse
I believe you should be using lima_32
https://mirrors.lolinet.com/firmware/moto/lima_32/official/TIMBR/
Flashing firmware with an locked bootloader is tricky sometimes
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
But I recommend trying LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
dont know what to do :C
sd_shadow said:
I believe you should be using lima_32
https://mirrors.lolinet.com/firmware/moto/lima_32/official/TIMBR/
Flashing firmware with an locked bootloader is tricky sometimes
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
But I recommend trying LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
I alredy tried a few variants of Lima_32 (Tefmx because of the rio.carrier, retail, retla, openmx,timbr) and all of this was on the PMDS 29.70-81-5, didnt know what to, i read somewhere that i need to install the same factory firmware to avoid the"Startup Failed" Error or rather the lastest firmware, you think that if i wait to a new firmware update cold be able to install it? why i cant boot with any firmware ?
Help!! I installed a ROM in my moto g8 play and doesn´t respond
Hi to everyone, i have seeing old guide´s to recover urs motorolas devices
my problem is that i installed a different ROM on my devices and now doesn´t boot
when i run
[fastboot getvar all]
the CMD respond with this
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-b64a50bf6-211028
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=01 M8=12
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: ZY2278J5NG
(bootloader) cid: 0x0032
(bootloader) channelid: 0x23
(bootloader) uid: E2BC718F707B06B3000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 268435456
(bootloader) reason: No bootable A/B slot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 01-13-2020
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C51711
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Jan 14 15:57:56 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32/lima:10/QMDS30.47
(bootloader) ro.build.fingerprint[1]: -33-5/7e278:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.mtk: alps-mp-q0.mp1.tc2sp-V1.53
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.14.141+ ([email protected]
(bootloader) kernel.version[1]: build) (gcc version 4.9.x 20150123 (prer
(bootloader) kernel.version[2]: elease) (GCC)) #1 SMP PREEMPT Thu Oct 28
(bootloader) kernel.version[3]: 10:57:32 CDT 2021
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: attmx
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: no
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
the problem in this case is tnat i installed a new ROM, at this point all was ok but after that i installed a new one i don´t check correctly the name and i finally installed QMDS30.47-33-5/7e278:user/release-keys0 and my devides accept LIMA_32_PMDS29.70-85-3_subsidy-IUSMXLA_regulatory-XT2015_2_IFETEL_CFC
as the original ROM i don´t understand whats the problem right now ´cause i installed all in the correct order, my conclusion was that i installed a different ROM no compatible with my motorola device and now as it says up here the problem is no bootalbe slot a/b and now is stucked on a no compatible ROM and it doesn´t boot also the OEM is locked and isn´t rootable, someone who can help me pls. i realy need the cellphone its my unic work tool and metod of comunication. THNKS for read
FrxncLpz said:
Help!! I installed a ROM in my moto g8 play and doesn´t respond
Hi to everyone, i have seeing old guide´s to recover urs motorolas devices
my problem is that i installed a different ROM on my devices and now doesn´t boot
when i run
[fastboot getvar all]
the CMD respond with this
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-b64a50bf6-211028
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=01 M8=12
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: ZY2278J5NG
(bootloader) cid: 0x0032
(bootloader) channelid: 0x23
(bootloader) uid: E2BC718F707B06B3000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 268435456
(bootloader) reason: No bootable A/B slot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 01-13-2020
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C51711
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Jan 14 15:57:56 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32/lima:10/QMDS30.47
(bootloader) ro.build.fingerprint[1]: -33-5/7e278:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.mtk: alps-mp-q0.mp1.tc2sp-V1.53
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.14.141+ ([email protected]
(bootloader) kernel.version[1]: build) (gcc version 4.9.x 20150123 (prer
(bootloader) kernel.version[2]: elease) (GCC)) #1 SMP PREEMPT Thu Oct 28
(bootloader) kernel.version[3]: 10:57:32 CDT 2021
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: attmx
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: no
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
the problem in this case is tnat i installed a new ROM, at this point all was ok but after that i installed a new one i don´t check correctly the name and i finally installed QMDS30.47-33-5/7e278:user/release-keys0 and my devides accept LIMA_32_PMDS29.70-85-3_subsidy-IUSMXLA_regulatory-XT2015_2_IFETEL_CFC
as the original ROM i don´t understand whats the problem right now ´cause i installed all in the correct order, my conclusion was that i installed a different ROM no compatible with my motorola device and now as it says up here the problem is no bootalbe slot a/b and now is stucked on a no compatible ROM and it doesn´t boot also the OEM is locked and isn´t rootable, someone who can help me pls. i realy need the cellphone its my unic work tool and metod of comunication. THNKS for read
Click to expand...
Click to collapse
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
sd_shadow said:
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi, my motorola is locked on the other ROM so if it searhes the unique ROM that its "available" for my phone is the replacement for the new ROM where its stucked and if y try to use de ROM with CMD doesn´t work. I´m realy stucked on this for a mond. :C
Related
Hello guys,
Looks like I've screwed up very badly. After an update to android 9 Pie i wanted to downgrade back to 8 following the guide on youtube (I can't post links yet)
I FORGOT to unlock the bootloader and ran the flash. And it went wrong. Now the phone freezes trying to connect to a Wi-Fi (i can't skip it) and I'm clueless what to do next. Maybe you can help me?
The data i have available on the bootloader:
BL: MBM-2.1-aljeter_retail-02dae09-190122
Baseband: <not found>
Product/Variant: jeter XT1922-3 32GB P4
Serial Number {i dont think it's necessary}
CPU: {i think irrelevant}
eMMC: {i think irrelevant}
DRAM: {i think irrelevant}
Console [NULL]: null
Tools Mode Config: DSABLED
Battery OK
oem_locked
Medawk said:
Hello guys,
Looks like I've screwed up very badly. After an update to android 9 Pie i wanted to downgrade back to 8 following the guide on youtube (I can't post links yet)
I FORGOT to unlock the bootloader and ran the flash. And it went wrong. Now the phone freezes trying to connect to a Wi-Fi (i can't skip it) and I'm clueless what to do next. Maybe you can help me?
The data i have available on the bootloader:
BL: MBM-2.1-aljeter_retail-02dae09-190122
Baseband: <not found>
Product/Variant: jeter XT1922-3 32GB P4
Serial Number {i dont think it's necessary}
CPU: {i think irrelevant}
eMMC: {i think irrelevant}
DRAM: {i think irrelevant}
Console [NULL]: null
Tools Mode Config: DSABLED
Battery OK
oem_locked
Click to expand...
Click to collapse
EDIT: I managed to get this info too:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-aljeter_retail-02dae09-190122
(bootloader) product: jeter
(bootloader) board: jeter
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 5
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG GX6BMB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 3GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: MSM8937
(bootloader) serialno: ZL62225459
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: 8122A81100000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 351844090939113
(bootloader) meid:
(bootloader) date: 05-18-2018
(bootloader) sku: XT1922-3
(bootloader) carrier_sku: XT1922-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Mar 28 11:32:34 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/aljeter/aljeter:9/PPPS29.
(bootloader) ro.build.fingerprint[1]: 55-25-2/06dbf:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.201.2.aljeter.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-03700-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-gccbc3e0 (hu
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20
(bootloader) kernel.version[2]: 150123 (prerelease) (GCC) ) #1 SMP PREEM
(bootloader) kernel.version[3]: PT Thu Mar 28 06:11:01 CDT 2019
(bootloader) sbl1.git: MBM-2.1-aljeter_retail-b867b3e-190122
(bootloader) rpm.git: MBM-2.1-aljeter_retail-099a494-dirty-190328
(bootloader) tz.git: MBM-2.1-aljeter_retail-f917b84-dirty-190328
(bootloader) devcfg.git: MBM-2.1-aljeter_retail-f917b84-dirty-190328
(bootloader) keymaster.git: MBM-2.1-aljeter_retail-f917b84-190328
(bootloader) cmnlib.git: MBM-2.1-aljeter_retail-f917b84-190328
(bootloader) cmnlib64.git: MBM-2.1-aljeter_retail-f917b84-190328
(bootloader) prov.git: MBM-2.1-aljeter_retail-f917b84-dirty-190328
(bootloader) aboot.git: MBM-2.1-aljeter_retail-02dae09-190122
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: reteu
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.074s
Did you already try to unlock the bootloader. You could then fastboot flash a stock rom from here https://mirrors.lolinet.com/firmware/moto/aljeter/official/RETAIL/
It worked finally, I was confused which software is the right one. Thanks!
Medawk said:
Hello guys,
Looks like I've screwed up very badly. After an update to android 9 Pie i wanted to downgrade back to 8 following the guide on youtube (I can't post links yet)
I FORGOT to unlock the bootloader and ran the flash. And it went wrong. Now the phone freezes trying to connect to a Wi-Fi (i can't skip it) and I'm clueless what to do next. Maybe you can help me?
The data i have available on the bootloader:
BL: MBM-2.1-aljeter_retail-02dae09-190122
Baseband: <not found>
Product/Variant: jeter XT1922-3 32GB P4
Serial Number {i dont think it's necessary}
CPU: {i think irrelevant}
eMMC: {i think irrelevant}
DRAM: {i think irrelevant}
Console [NULL]: null
Tools Mode Config: DSABLED
Battery OK
oem_locked
Click to expand...
Click to collapse
My moto g6 play 1922-5 ta so too. Can you solve it?
Hi,
I have got the golden retcn version of the Moto Z2 Force. Unfortunately, it is still on Android version 8, and I would like to change this. Is this possible? If so, could you please point me in the right direction? I do not want Lineage OS, only the updated stock rom. And I do not care much about SafetyNet.
SKU: XT1789-05
Android 8.0.0
Software channel: retcn
Thanks,
Mark
mark_14 said:
Hi,
I have got the golden retcn version of the Moto Z2 Force. Unfortunately, it is still on Android version 8, and I would like to change this. Is this possible? If so, could you please point me in the right direction? I do not want Lineage OS, only the updated stock rom. And I do not care much about SafetyNet.
SKU: XT1789-05
Android 8.0.0
Software channel: retcn
Thanks,
Mark
Click to expand...
Click to collapse
The golden rule when it comes to pie is, don't flash any pie firmware that isn't for your variant. Once you upgrade to pie modems you can't go back to oreo, and if the modem isn't right you won't have a baseband and possibly no way to fix it. That being said, many of the retail variants have the same firmware so it might be possible for you to upgrade properly. Boot into bootloader and run getvar command, then post the results so we can see what you're on.
PHP:
adb reboot bootloader
fastboot getvar all
fastboot reboot
41rw4lk said:
Boot into bootloader and run getvar command, then post the results so we can see what you're on.
Click to expand...
Click to collapse
Thanks for your fast response. These are the results:
Code:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_retcn-013cc51-180201
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: CHINA
(bootloader) storage-type: UFS
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: MSM8998 2.1 (4)
(bootloader) serialno: <removed>
(bootloader) cid: 0x000B
(bootloader) channelid: 0xc1
(bootloader) uid: 5DE0141F
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: <removed>
(bootloader) meid:
(bootloader) date: 03-29-2018
(bootloader) sku: XT1789-05
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 3691
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash/nash:8.0.0/OPXS27.10
(bootloader) ro.build.fingerprint[1]: 9-52-10/12:user/release-keys
(bootloader) poweroffalarm: 1
(bootloader) ro.build.version.full[0]: Blur_Version.27.411.12.nash.retai
(bootloader) ro.build.version.full[1]: l.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: M8998_20207.117.02.41-01.01R NCD
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g33eec99 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Sun Nov 4 09:34:03 CST 2018
(bootloader) abl.git: MBM-3.0-nash_retcn-013cc51-180201
(bootloader) xbl.git: MBM-3.0-nash_retcn-4ee2102-180201
(bootloader) pmic.git: MBM-3.0-nash_retcn-4ee2102-180201
(bootloader) rpm.git: MBM-3.0-nash_retcn-d3e45a4-180201
(bootloader) tz.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) hyp.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) devcfg.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) cmnlib.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) cmnlib64.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) keymaster.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) storsec.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) prov.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (144)
(bootloader) ro.carrier: retcn
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
I join the question. I have exactly the same results from 'fastboot getvar all ' command. Also i have compilation number OPXS27.109-34-21, which is different than NASH_RETCN firmware on lolinet
forgottennick said:
I join the question. I have exactly the same results from 'fastboot getvar all ' command. Also i have compilation number OPXS27.109-34-21, which is different than NASH_RETCN firmware on lolinet
Click to expand...
Click to collapse
This should be a newer firmware version for your device.
https://mirrors.lolinet.com/firmware/moto/nash_retcn/official/RETCN/
XT1789-05_NASH_RETCN_8.0.0_OCX27.138-29_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Sent from my payton_sprout using XDA Labs
Guys, I have a serious problem and I couldn't solve it, I have 1 week with a Moto E5 Plus, I couldn't find the right ROM to flash it. For some reason I can't unlock the OEM, so I can only flash the same version or a higher one, I haven't got one or the other, I need your help, what can I do?
Here are my model info:
version: 0.5
version-bootloader: moto-msm8917-BE.4F
product: hannah
board: hannah
secure: yes
hwrev: P3
radio: 1
storage-type: emmc
emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
cpu: MSM8917
serialno: 0052257912
cid: 0x0032
channelid: 0x19
uid: FECA6A4100000000000000000000
securestate: oem_locked
iswarrantyvoid: no
max-download-size: 535822336
reason: Volume down key pressed
imei:
meid:
date: 12-17-2018
sku: XT1924-4
carrier_sku: XT1924-4
battid: SNN5998A
iccid:
cust_md5:
max-sparse-size: 268435456
current-time: "Fri Feb 7 1:21:40 UTC 2020"
ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
ro.build.fingerprint[2]: s
poweroffalarm: 0
ro.build.version.full[0]: Blur_Version.27.311.14.rhannah.re
ro.build.version.full[1]: tail.en.US
ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
version-baseband: <not found>
kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
kernel.version[3]: 2019
sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
rpm.git: git=02a0726-dirty
tz.git: git=9692555-dirty
devcfg.git: git=9692555-dirty
keymaster.git: git=9692555
cmnlib.git: git=9692555
cmnlib64.git: git=9692555
prov.git: git=9692555-dirty
aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
frp-state: protected (77)
ro.carrier: retbr
current-slot:
slot-suffixes: _a
slot-count: 1
slot-successful:_a: INVALID
slot-successful:_b: INVALID
slot-bootable:_a: INVALID
slot-bootable:_b: INVALID
slot-retry-count:_a: unknown
slot-retry-count:_b: unknown
all: listed above
When I try to flash it, I always get this:
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
What can I do to flash it? Thank you for all your help
jeanxd1301 said:
Guys, I have a serious problem and I couldn't solve it, I have 1 week with a Moto E5 Plus, I couldn't find the right ROM to flash it. For some reason I can't unlock the OEM, so I can only flash the same version or a higher one, I haven't got one or the other, I need your help, what can I do?
Here are my model info:
version: 0.5
version-bootloader: moto-msm8917-BE.4F
product: hannah
board: hannah
secure: yes
hwrev: P3
radio: 1
storage-type: emmc
emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
cpu: MSM8917
serialno: 0052257912
cid: 0x0032
channelid: 0x19
uid: FECA6A4100000000000000000000
securestate: oem_locked
iswarrantyvoid: no
max-download-size: 535822336
reason: Volume down key pressed
imei: 355552095465515
meid:
date: 12-17-2018
sku: XT1924-4
carrier_sku: XT1924-4
battid: SNN5998A
iccid:
cust_md5:
max-sparse-size: 268435456
current-time: "Fri Feb 7 1:21:40 UTC 2020"
ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
ro.build.fingerprint[2]: s
poweroffalarm: 0
ro.build.version.full[0]: Blur_Version.27.311.14.rhannah.re
ro.build.version.full[1]: tail.en.US
ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
version-baseband: <not found>
kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
kernel.version[3]: 2019
sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
rpm.git: git=02a0726-dirty
tz.git: git=9692555-dirty
devcfg.git: git=9692555-dirty
keymaster.git: git=9692555
cmnlib.git: git=9692555
cmnlib64.git: git=9692555
prov.git: git=9692555-dirty
aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
frp-state: protected (77)
ro.carrier: retbr
current-slot:
slot-suffixes: _a
slot-count: 1
slot-successful:_a: INVALID
slot-successful:_b: INVALID
slot-bootable:_a: INVALID
slot-bootable:_b: INVALID
slot-retry-count:_a: unknown
slot-retry-count:_b: unknown
all: listed above
When I try to flash it, I always get this:
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
What can I do to flash it? Thank you for all your help
Click to expand...
Click to collapse
Are you flashing rhannah Retbr ?
https://mirrors.lolinet.com/firmware/moto/rhannah/official/RETBR/
Sent from my perry_f using XDA Labs
---------- Post added at 08:09 AM ---------- Previous post was at 08:05 AM ----------
And you may want to remove the
IMEI line
Sent from my perry_f using XDA Labs
sd_shadow said:
Are you flashing rhannah Retbr ?
Sent from my perry_f using XDA Labs
---------- Post added at 08:09 AM ---------- Previous post was at 08:05 AM ----------
And you may want to remove the
IMEI line
Sent from my perry_f using XDA Labs
Click to expand...
Click to collapse
No, I've only tried TICGO and two different versions of RETAR, but neither worked. I'll download the latest RETBR version and see how it goes. Thanks for your help
Why do you say the IMEI thing?
jeanxd1301 said:
No, I've only tried TICGO and two different versions of RETAR, but neither worked. I'll download the latest RETBR version and see how it goes. Thanks for your help
Why do you say the IMEI thing?
Click to expand...
Click to collapse
getvar all shows the IMEI
It's a unique ID for the device that you may not want to post on the internet
Sent from my mata using XDA Labs
hello please have the same problem moto e5 plus, oem unlocked, have try many firmware, only fastboot mode ,
gpt error (bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZL5223WDJH
(bootloader) cid: 0x0032
(bootloader) channelid: 0x18
(bootloader) uid: 17E0C47C00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351878090871116
(bootloader) meid:
(bootloader) date: 05-20-2018
(bootloader) sku: XT1924-4
(bootloader) carrier_sku: XT1924-4
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 31 19:39:17 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.331.14.rhannah.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8917_34.42.05.98R HANNAH_LATAMDSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=9692555-dirty
(bootloader) devcfg.git: git=9692555-dirty
(bootloader) keymaster.git: git=9692555
(bootloader) cmnlib.git: git=9692555
(bootloader) cmnlib64.git: git=9692555
(bootloader) prov.git: git=9692555-dirty
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tigco
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
please help me...
pepoxxx said:
hello please have the same problem moto e5 plus, oem unlocked, have try many firmware, only fastboot mode ,
gpt error (bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZL5223WDJH
(bootloader) cid: 0x0032
(bootloader) channelid: 0x18
(bootloader) uid: 17E0C47C00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351878090871116
(bootloader) meid:
(bootloader) date: 05-20-2018
(bootloader) sku: XT1924-4
(bootloader) carrier_sku: XT1924-4
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 31 19:39:17 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.331.14.rhannah.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8917_34.42.05.98R HANNAH_LATAMDSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=9692555-dirty
(bootloader) devcfg.git: git=9692555-dirty
(bootloader) keymaster.git: git=9692555
(bootloader) cmnlib.git: git=9692555
(bootloader) cmnlib64.git: git=9692555
(bootloader) prov.git: git=9692555-dirty
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tigco
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
please help me...
Click to expand...
Click to collapse
Try LMSA'S flash rescue
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my ocean using XDA Labs
Hi,
I got a Moto Z2 Force. It is a T-Mobile US ROM and I think also a TMO device. Not sure if it is a "test sample". I think I have somewhere seen something like "testkeys" or similar.
I bought this via internet - not in a Telekom Store.
So out of my experience from HTC devices - it could be anything.
I use this device in Europe, actually with a Telefonica SIM.
My device get´s a permanent update notification for a OTA which leads into an error: Cannot install OCXS27.1.4. I am actually on OCX27.1.3 BUILD
Note there is no "S" - whatever this means.
This device is not tached from my side. Though I don´t know what the seller has done before.
Baseband is: M8998TMO_20207.117.02.41.02R NUS
So I did not root the device.
There is no unlocked Bootloader, and I do not see the point
Patchlevel is sep. the first 2018
I would like to update to the latest official TMO ROM, shouldn´t be too big of an issue.
On Huawei Devices I updated the OTA manually, with no issues and fast. Or a complete official ROM over an older one.
HTC devices have been easy to update also, if you stay in its path, like official or testkeys, same with regions (regarding ROMs).
Is there a similar way for Motos? This is actually my first Motorola since my MPX 220 (IF anyone nows what I mean)
TMO is XT1789-04 which should be seen by the charging port. You can boot into bootloader and run the command fastboot getvar all to see the status of your phone. I suspect that it is in fact bootloader unlocked and has had a custom logo flashed to hide the bootloader unlocked warning, which also will keep an OTA from installing.
Post the output of the getvar command if you're not sure and I can help you sort it.
Hi,
sorry missed your reply because I did not get an notification. anyway:
fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_tmo-1f35305-180905
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA_UMTS
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224WX6BN
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 1F21F01A
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 356503081281xxx
(bootloader) meid:
(bootloader) date: 03-26-2018
(bootloader) sku: XT1789-04
(bootloader) carrier_sku: XT1789-04
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 4287
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_tmo_c/nash:8.0.0/OCX
(bootloader) ro.build.fingerprint[1]: 27.109-51-11/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.301.4.nash_tmo_c.
(bootloader) ro.build.version.full[1]: tmo.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: M8998TMO_20207.117.02.41.02R NUS
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g15222f4 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Wed Sep 5 05:41:24 CDT 2018
(bootloader) git:abl: MBM-3.0-nash_tmo-1f35305-180905
(bootloader) git:xbl: MBM-3.0-nash_tmo-9869834-180905
(bootloader) gitmic: MBM-3.0-nash_tmo-9869834-180905
(bootloader) git:rpm: MBM-3.0-nash_tmo-b13e14f-180905
(bootloader) git:tz: MBM-3.0-nash_tmo-7d478e6-180905
(bootloader) git:hyp: MBM-3.0-nash_tmo-7d478e6-180905
(bootloader) git:devcfg: MBM-3.0-nash_tmo-7d478e6-180905
(bootloader) git:cmnlib: MBM-3.0-nash_tmo-7d478e6-180905
(bootloader) git:cmnlib64: MBM-3.0-nash_tmo-7d478e6-180905
(bootloader) git:keymaster: MBM-3.0-nash_tmo-7d478e6-180905
(bootloader) git:storsec: MBM-3.0-nash_tmo-7d478e6-180905
(bootloader) gitrov: MBM-3.0-nash_tmo-7d478e6-180905
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: tmo
(bootloader) current-slot: _b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 3
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: yes
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 6
all: listed above
Finished. Total time: 0.109s
I do not have any marking on my device, like the TMO XT ....
Does "PVT" has anything to say? Hardware Revision - I think.
Looks pretty clean, the easiest way would be to use lenovo moto smart assistant to upgrade.
Mtot Device manager says:
There is no noew software for my device.
Current version:
N/A
Not a good sign. The Software does´t read my device at all.
41rw4lk said:
Looks pretty clean, the easiest way would be to use lenovo moto smart assistant to upgrade.
Click to expand...
Click to collapse
So I actually misunderstood the Moto Software tool you ment. When I googled I found "Motorola Device Manager". You ment - obviously "Lenovo moto smart assistant", which, interestingly is a totally different software. Maybe this has something to do with regions. I don´t know.
To round up this thread:
I read twice, searched the Tool you ment (the US version, although I use an EU SIM), it installed nicely and connected correctly to my device. It found the latest update and updated directly to the lastet. From .4 to version .7. So the file had a size of 2GB.
Although the software (LMSA) says differently, it does NOT wipe my device.
Edit: Connection to my PC did NOT work via USB 3.0! Interestingly it worked via a keyboard extend USB Hub 2.0 though.
EDIT: SOLVED* (can delete)
Type:
Code:
fastboot flashing unlock
then flash as usual....phewww
I was trying to revert to stock Android from a custom rom with an unlocked bootloader.
Something happened that the bootloader re-locked but did not flash the stock firmware properly. (using this signed image: https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-oreo-bootloader-to-stock-t3784621)
Problem #1 seems to be that I cannot flash anything because the bootloader re-locked.
Problem #2 seems to be that I cannot unlock the bootloader either because the phone is in an "invalid boot state" meaning "Allow OEM Unlocking" is supposedly not enabled in Settings > Developer.
Problem #3: When I go into Recovery Mode the device reads "I have loaded a different operating system"
Here is my getvar all:
Code:
[HIDE](bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C1.82
(bootloader) product: addison
(bootloader) board: addison
(bootloader) secure: yes
(bootloader) hwrev: P7
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B
(bootloader) cpu: MSM8953
(bootloader) serialno: #####
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8f
(bootloader) uid: 5CC656CD00000000000000000000
(bootloader) securestate: flashing_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: #######
(bootloader) meid:
(bootloader) date: 08-30-2016
(bootloader) sku: XT1635-02
(bootloader) battid: SNN5974A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 1 3:48:49 UTC 1970"
(bootloader) ro.build.fingerprint: <not found>
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g174984b (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Mon Mar 26 08:27:14 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VC1.82-0-g3523998
(bootloader) rpm.git: git=bd19194
(bootloader) tz.git: git=fbd9875-dirty
(bootloader) devcfg.git: git=fbd9875-dirty
(bootloader) keymaster.git: git=fbd9875-dirty
(bootloader) cmnlib.git: git=fbd9875-dirty
(bootloader) cmnlib64.git: git=fbd9875-dirty
(bootloader) prov.git: git=fbd9875-dirty
(bootloader) aboot.git: git=MBM-NG-VC1.82-0-g345bd7e
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: rcica
all: listed above
finished. total time: 0.322s[/HIDE]
Anyone have any ideas? On how I can get this phone to boot? I don't really care how I get it back to boot, even if its back to a custom rom, at this point I just want it to POST a boot.
I tried the Lenovo Rescue and Smart Assistant tool but the software could not recognise the device.
I was looking at RSD LITE tool. I never used this. Anyone have any experience with this tool?
mzp_user said:
EDIT: SOLVED* (can delete)
Type:
Code:
fastboot flashing unlock
then flash as usual....phewww
I was trying to revert to stock Android from a custom rom with an unlocked bootloader.
Something happened that the bootloader re-locked but did not flash the stock firmware properly. (using this signed image: https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-oreo-bootloader-to-stock-t3784621)
Problem #1 seems to be that I cannot flash anything because the bootloader re-locked.
Problem #2 seems to be that I cannot unlock the bootloader either because the phone is in an "invalid boot state" meaning "Allow OEM Unlocking" is supposedly not enabled in Settings > Developer.
Problem #3: When I go into Recovery Mode the device reads "I have loaded a different operating system"
Here is my getvar all:
Code:
[HIDE](bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C1.82
(bootloader) product: addison
(bootloader) board: addison
(bootloader) secure: yes
(bootloader) hwrev: P7
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B
(bootloader) cpu: MSM8953
(bootloader) serialno: #####
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8f
(bootloader) uid: 5CC656CD00000000000000000000
(bootloader) securestate: flashing_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: #######
(bootloader) meid:
(bootloader) date: 08-30-2016
(bootloader) sku: XT1635-02
(bootloader) battid: SNN5974A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 1 3:48:49 UTC 1970"
(bootloader) ro.build.fingerprint: <not found>
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g174984b (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Mon Mar 26 08:27:14 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VC1.82-0-g3523998
(bootloader) rpm.git: git=bd19194
(bootloader) tz.git: git=fbd9875-dirty
(bootloader) devcfg.git: git=fbd9875-dirty
(bootloader) keymaster.git: git=fbd9875-dirty
(bootloader) cmnlib.git: git=fbd9875-dirty
(bootloader) cmnlib64.git: git=fbd9875-dirty
(bootloader) prov.git: git=fbd9875-dirty
(bootloader) aboot.git: git=MBM-NG-VC1.82-0-g345bd7e
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: rcica
all: listed above
finished. total time: 0.322s[/HIDE]
Anyone have any ideas? On how I can get this phone to boot? I don't really care how I get it back to boot, even if its back to a custom rom, at this point I just want it to POST a boot.
I tried the Lenovo Rescue and Smart Assistant tool but the software could not recognise the device.
I was looking at RSD LITE tool. I never used this. Anyone have any experience with this tool?
Click to expand...
Click to collapse
I'm having the same problem. Did you find any solution?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}