Right Clock-Black Statusbar-Navbar swap Mods - Google Pixel 3 XL Themes, Apps, and Mods

Here are a few stand-alone Mods people have been requesting.
To get black statusbar in addition to one of the mods below, flash the mod you want, reboot, flash black statusbar addon. You will need to then remove the mod you installed prior to the black statusbar mod (leaving just the addon mod) and reboot.
Uploaded 10-7-21
Right clock
RC.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Right clock-Navbar Swap
RCswap.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Right Clock over System Icons
RCoverwifi.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Right Clock ampm over System Icons
RCoverwifiampm.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Right Clock over System Icons NavbarSwap
RCoverwifiswap.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Right Clock ampm over System Icons NavbarSwap
RCoverwifiampmswap.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Navbar Swap
navbarswap.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Black Statusbar
BlackStatus.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Black Statusbar add-on
BlackStatusaddon.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------------------------
If I helped, hit the Thanks Button!
Feeling generous, send me a beer!
--------------------------------------------------

For the Navbar Swap module, what button combo is that for? Do we need to change anything to make it say only swap back/home if we are on the 3 button config?

Tulsadiver said:
Here are a few stand-alone Mods people have been requesting. December updates.
Right clock
https://www.androidfilehost.com/?fid=4349826312261653402
Right clock for Active edge
https://www.androidfilehost.com/?fid=4349826312261653403
Right clock-Navbar Swap
https://www.androidfilehost.com/?fid=4349826312261653398
Right clock-Navbar swap for Active edge
https://www.androidfilehost.com/?fid=4349826312261653401
Navbar Swap
https://www.androidfilehost.com/?fid=4349826312261653397
Navbar Swap Active Edge
https://www.androidfilehost.com/?fid=4349826312261653404
Black Statusbar
https://www.androidfilehost.com/?fid=4349826312261653400
Black Statusbar Active Edge
https://www.androidfilehost.com/?fid=4349826312261653399
Black Statusbar Navbar Swap
https://www.androidfilehost.com/?fid=4349826312261653406
Black Statusbar Navbar swap Active Edge
https://www.androidfilehost.com/?fid=4349826312261653407
Click to expand...
Click to collapse
Hi,
I would like to customize my Nav bar by adding new buttons also. Is that possible through Magisk Module? If it's not too much, can you guide me on how you created these modules? I can try to create my own with extra buttons on my navbar
Thanks

keertikumar_ws said:
Hi,
I would like to customize my Nav bar by adding new buttons also. Is that possible through Magisk Module? If it's not too much, can you guide me on how you created these modules? I can try to create my own with extra buttons on my navbar
Thanks
Click to expand...
Click to collapse
Are you asking how to decompile, edit, and recompile?
Here is a basic guide on editing xml files.
https://forum.xda-developers.com/general/xda-university/xml-101-xml-modding-easy-t2929816

Tulsadiver said:
Are you asking how to decompile, edit, and recompile?
Here is a basic guide on editing xml files.
https://forum.xda-developers.com/general/xda-university/xml-101-xml-modding-easy-t2929816
Click to expand...
Click to collapse
Thanks a lot for the link. It's very helpful. So if I understand correctly, to modify the NavBar I need to edit XML files in systemui apk and install that APK? how to put it as a Magisk? And also the decompile and recompile steps too :/ Any tutorial we have?

keertikumar_ws said:
Thanks a lot for the link. It's very helpful. So if I understand correctly, to modify the NavBar I need to edit XML files in systemui apk and install that APK? how to put it as a Magisk? And also the decompile and recompile steps too :/ Any tutorial we have?
Click to expand...
Click to collapse
This is what I use for decompiling and recompiling:
https://forum.xda-developers.com/showthread.php?t=1633333
The magisk thread would be the best source for magisk related questions.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

Tulsadiver said:
This is what I use for decompiling and recompiling:
https://forum.xda-developers.com/showthread.php?t=1633333
The magisk thread would be the best source for magisk related questions.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Thanks a lot. Tool looks great ?will try it out and let you know if I face any issues.

Navbar works on Pixel 2 XL, Android 10, Dec patch, too.
Tulsadiver said:
Here are a few stand-alone Mods people have been requesting. December updates.
Navbar Swap
https://www.androidfilehost.com/?fid=4349826312261653397
Thanks a million.
Click to expand...
Click to collapse

Tried Navbar bar Swap on Android 10, and got a bootloop installing the module through Magisk. Either I did something wrong, or this doesn't work with the most recent pixel update. Luckily, I was able to delete modules through ADB to get my phone up and running again.

stmm said:
Tried Navbar bar Swap on Android 10, and got a bootloop installing the module through Magisk. Either I did something wrong, or this doesn't work with the most recent pixel update. Luckily, I was able to delete modules through ADB to get my phone up and running again.
Click to expand...
Click to collapse
I just removed the modules I had installed and flashed this with no problem. Are you stock?

Tulsadiver said:
I just removed the modules I had installed and flashed this with no problem. Are you stock?
Click to expand...
Click to collapse
Interesting. Yeah, I am stock. Flashed the most recent boot.img and rooted using the magisked_patched method. I had 2 button nav enabled when I flashed it. Could that be the problem? Like, it HAS to be set on 3 button nav in order for this to work?

stmm said:
Interesting. Yeah, I am stock. Flashed the most recent boot.img and rooted using the magisked_patched method. I had 2 button nav enabled when I flashed it. Could that be the problem? Like, it HAS to be set on 3 button nav in order for this to work?
Click to expand...
Click to collapse
It only works on 3button

I have a Pixel 2 XL, I realize this is the 3 XL section.
I flashed the navbar swap back recents Magisk module, realized that my Active Edge wasn't working, uninstalled it, flashed the Active Edge version of the navbar swap back recents, but Active Edge is still not working. The device registers that a squeeze takes place with a vibrate, but Assistant does not pop up.
Am I doing something wrong?

Would you be updating this for February?

Sunsparc said:
I have a Pixel 2 XL, I realize this is the 3 XL section.
I flashed the navbar swap back recents Magisk module, realized that my Active Edge wasn't working, uninstalled it, flashed the Active Edge version of the navbar swap back recents, but Active Edge is still not working. The device registers that a squeeze takes place with a vibrate, but Assistant does not pop up.
Am I doing something wrong?
Click to expand...
Click to collapse
Did you delete the active edge sense module prior to installing my navbar swap edge sense mod?

peconaut said:
Would you be updating this for February?
Click to expand...
Click to collapse
I'll try and get to it tomorrow.

Tulsadiver said:
Did you delete the active edge sense module prior to installing my navbar swap edge sense mod?
Click to expand...
Click to collapse
I didn't have that installed at all, so nothing to delete. I had your navbar swap installed then navbar swap active edge.
Side note: I disabled the module and rebooted, my squeeze works properly again. I'd like to get the swap working if possible.

Sunsparc said:
I didn't have that installed at all, so nothing to delete. I had your navbar swap installed then navbar swap active edge.
Side note: I disabled the module and rebooted, my squeeze works properly again. I'd like to get the swap working if possible.
Click to expand...
Click to collapse
Install the navbar swap only, not the navbar active edge sense navbar swap. That is for those using active edge sense mod.

Tulsadiver said:
Install the navbar swap only, not the navbar active edge sense navbar swap. That is for those using active edge sense mod.
Click to expand...
Click to collapse
Looks like we're good, weird that it didn't work the first time. Thank you!

Sunsparc said:
Looks like we're good, weird that it didn't work the first time. Thank you!
Click to expand...
Click to collapse
Needs to be updated.

Related

[MODv3] [NMF26V] NavBar Tuner, Additional QS Tile Rows, NavBar DPI - TWRP Flashable

**I AM NOT RESPONSIBLE FOR DAMAGES TO YOUR DEVICE. PROCEED AT YOUR OWN RISK**
**UPDATE v3 2017.01.04**
I've updated the mod to NMF26V. NMF26V increased the size of the NavBar to a ridiculous 48dpi, so I've had to add mod intermediate steps. I've also added 0dpi/0dpi, as some people have requested this. So far, I've tested each version and it has worked, but if you find an issue, let me know and I'll fix it. You can always return to stock.
The mods that can be applied are:
NavBar/StatusBar dpi
0dpi/0dpi
0dpi/20dpi
0dpi/24dpi
32dpi/24dpi
32dpi/20dpi
36dpi/24dpi
36dpi/20dpi
40dpi/24dpi
40dpi/20dpi
44dpi/24dpi
44dpi/20dpi
48dpi/20dpi
SystemUI Mods
NavBarUI Manager + Brightness
NavBarUI Manager + Brightness + 4 QS Tiles
NavBarUI Manager + Brightness + 4 QS Tiles + Battery Mod
Download here Stranula_Full_Flash_v3
**/UPDATE**
**UPDATE**
I've now used Aroma to make a TWRP flashable zip making this much easier to install.
Now in order to install, simply download the Stranula.Full.Flash.v2.zip reboot to TWRP recovery, install the zip, and select which mods you want. You can only select one SystemUIGoogle.apk and one framework-res.apk to install. I've also now included the stock apks, so you can easily revert back.
Download Stranula.Full.Flash.v2.zip
**/Update**
Coming from Galaxy devices, I got used to the "Back" button on the right and the "Recents" button on the left of the device, and have been trying to figure out a way to do this on the Pixel.
After looking at [MOD] - WETA UI Mods - [3MinitBattery][NavTuner][centerclock][navbarheight], I knew this had the answer, but I couldn't get it to work on NMF26Q, so after a bit of googling, I found this [MOD][GUIDE] Enable Navbar Tuner for Nougat [7.0] which gave me what I needed to make the mod myself. Finally, thanks to help from fritzgerald I also now know how to add the full battery % in the status bar instead of the battery icon (more details here [GUIDE] Add Battery % to Statusbar ! [Updated Stock 2.3+, CM9/10/10.1 etc -28.9.14])
I made 3 versions, and unless someone suggests a change that I would personally use, I do not intend to make any other changes, or respond to requests.
SystemUIGoogle-NavBar+Brightness.apk has the modifcation to add NavBar Tuner to the SystemUI Tuner as well as the option to remove the brightness slider from the dropdown.
SystemUIGoogle-NavBar+Brightness+4Tile.apk has the same, but additionally, when the full QS is pulled down, it will display 4 columns instead of 3.
SystemUIGoogle-NavBar+Brightness+4Tile+BatteryMod.apk has the same, but additionally has the battery % in the statusbar.
varun.gid said:
that's great work! Maybe you can have a mod for navbar height too?
Click to expand...
Click to collapse
I've gone ahead and made a 0dpi, 32dpi, 36dpi, and 40dpi version. The 0dpi will leave you with no NavBar, so make sure you already have another option installed.
If this helps you, please say thanks!
that's great work! Maybe you can have a mod for navbar height too?
**Manual Install Instructions**
SystemUIGoogle.apk
**MUST BE ROOTED**
1. Download the desired file
2. Using Root Browser, rename the file to SystemUIGoogle.apk
3. Copy SystemUIGoogle.apk to /system/priv-app/SystemUIGoogle/
4. Change permissions to rw-r--r--
5. Reboot System
framework-res.apk
I found that these cannot be installed while the system is running, so they need to be installed through TWRP.
1. Download your file of choice
2. Rename the file to framework-res.apk
3. Boot into TWRP Recovery
4. If it does not ask for your password, reboot to recovery again
5. Select Mount
5.1 Check System
5.2 Go back
6. Select Advanced
6.1 Select File Manager
7. Navigate to /system/system/framework/
7.1 Long press framework-res.apk
7.2 Rename to framework-res.apk.bkk
8. Navigate to /sdcard/download/
8.1 Long press framework-res.apk
8.2 Select Copy File
9. Navigate to /system/system/framework/
10. Select the Check Mark in the bottom right corner to copy
11. Navigate to /system/system/framework/
11.1 Long press framework-res.apk
11.2 Select chmod 755
12. Reboot to system
Sharing these for anyone that wants them. I noticed you were asking for the battery percent mod.
Framework Mods:
Disabled screen on/off on USB connect/disconnect.
40dp NavBar.
SystemUI Mods:
NavBar Tuner added to SystemUI Tuner
Disable Brightness added to SystemUI Tuner
QS Tiles increased to 6
Battery percent added to Status Bar
Too big to attach to the post.
https://www.dropbox.com/s/bogpgl1l93ig6ek/NMF26Q Mods.rar?dl=1
fritzgerald said:
Sharing these for anyone that wants them. I noticed you were asking for the battery percent mod.
Framework Mods:
Disabled screen on/off on USB connect/disconnect.
40dp NavBar.
SystemUI Mods:
NavBar Tuner added to SystemUI Tuner
Disable Brightness added to SystemUI Tuner
QS Tiles increased to 6
Battery percent added to Status Bar
Too big to attach to the post.
https://www.dropbox.com/s/bogpgl1l93ig6ek/NMF26Q Mods.rar?dl=1
Click to expand...
Click to collapse
That's great. Which apk, and what code, do you edit for the battery mod?
**UPDATE**
After comparing our files, I figured out how you did it, then subsequently found where you got the mod from. I'm glad to finally have the battery mod.
stranula said:
That's great. Which apk, and what code, do you edit for the battery mod?
**UPDATE**
After comparing our files, I figured out how you did it, then subsequently found where you got the mod from. I'm glad to finally have the battery mod.
Click to expand...
Click to collapse
It's an old mod, I just pulled it in to this framework. Haven't really modded since my SGS2 but figured I'd start it up again. Feel free to shoot a PM if you ever get stuck and want a second set of eyes.
I've updated this mod with a TWRP flashable zip file containing all of the mods in one. I don't have any testers, so I've only tested it myself, and so far everything is working.
If you happen to use these mods, and the installer, please let me know if everything works, or if you experience any problems.
fritzgerald said:
Sharing these for anyone that wants them. I noticed you were asking for the battery percent mod.
Framework Mods:
Disabled screen on/off on USB connect/disconnect.
40dp NavBar.
SystemUI Mods:
NavBar Tuner added to SystemUI Tuner
Disable Brightness added to SystemUI Tuner
QS Tiles increased to 6
Battery percent added to Status Bar
Too big to attach to the post.
https://www.dropbox.com/s/bogpgl1l93ig6ek/NMF26Q Mods.rar?dl=1
Click to expand...
Click to collapse
Any way to have this but have the QS tiles at 4 and no battery percent?
stranula said:
I've updated this mod with a TWRP flashable zip file containing all of the mods in one. I don't have any testers, so I've only tested it myself, and so far everything is working.
If you happen to use these mods, and the installer, please let me know if everything works, or if you experience any problems.
Click to expand...
Click to collapse
just installed and working great! i got so used to the back button being on the other side, took some time to get used to it on the new phone, but now I realize I'm going to have to re-learn the buttons again since i'm finally used to them!
Thank you for this! Now if someone can just get a slide finger over status bar for brightness and volume keys for change track going i'll be all set!!!
hochoch said:
just installed and working great! i got so used to the back button being on the other side, took some time to get used to it on the new phone, but now I realize I'm going to have to re-learn the buttons again since i'm finally used to them!
Thank you for this! Now if someone can just get a slide finger over status bar for brightness and volume keys for change track going i'll be all set!!!
Click to expand...
Click to collapse
Great, thanks for letting me know. I also want the brightness adjuster, I will start looking into that now.
I'll also look for the volume key thing, but uncertain if I'll find that one.
stranula said:
Great, thanks for letting me know. I also want the brightness adjuster, I will start looking into that now.
I'll also look for the volume key thing, but uncertain if I'll find that one.
Click to expand...
Click to collapse
awesome - really don't feel like starting w/ custom roms again and just want to tweak a few things! Oh - last request - rotate volume keys when screen rotates. those 3 things and i'm so golden! Thanks for your hard work!!!
Any chance one of the options for adding a button to the nav bar could be "take a screenshot"?
JAYNO20 said:
Any chance one of the options for adding a button to the nav bar could be "take a screenshot"?
Click to expand...
Click to collapse
I'm really only proficient enough to implement changes other people have done the work to figure out. I was a bit more involved a couple of years ago, and this is my first jump into modding Nougat, so I'm still trying to refamiliarize myself. That being said, if you can point me to guides for Mods of interest, I can try to implement them.
Will this also work on NMF26O?
mmmsauce said:
Will this also work on NMF26O?
Click to expand...
Click to collapse
I haven't tried. My #1 recommendation is to update then install. However, if that was what you wanted to do, you wouldn't have asked.
So, my #2 recommendation is to go into TWRP, mount system, open file manager, rename /system/system/framework/framework-res.apk to framework-res.apk.bkk and /system/system/priv-app/SystemUIGoogle/SystemUIGoogle.apk to SystemUIGoogle.apk.bkk.
Now you've backed up your original files. Install my mods and reboot. If they work, awesome, let us know. If they do not, boot back into TWRP and restore your original files, then come back here and let us know.
stranula said:
I haven't tried. My #1 recommendation is to update then install. However, if that was what you wanted to do, you wouldn't have asked.
So, my #2 recommendation is to go into TWRP, mount system, open file manager, rename /system/system/framework/framework-res.apk to framework-res.apk.bkk and /system/system/priv-app/SystemUIGoogle/SystemUIGoogle.apk to SystemUIGoogle.apk.bkk.
Now you've backed up your original files. Install my mods and reboot. If they work, awesome, let us know. If they do not, boot back into TWRP and restore your original files, then come back here and let us know.
Click to expand...
Click to collapse
I will definitely try that once I get back on wifi!
Could we get the files with no navbar tweak?
je2854 said:
Could we get the files with no navbar tweak?
Click to expand...
Click to collapse
I don't know what you mean.
If you don't want the navbar tweak, don't install the framework-res.apk.
The framework-res has the navbar dpi edits. The systemuigoogle has the other edits.
mmmsauce said:
I will definitely try that once I get back on wifi!
Click to expand...
Click to collapse
Any good news ? I am also on the NMF26O release.
stranula said:
I don't know what you mean.
If you don't want the navbar tweak, don't install the framework-res.apk.
The framework-res has the navbar dpi edits. The systemuigoogle has the other edits.
Click to expand...
Click to collapse
I just didn't want the buttons switched is all..

Navbar height

Is there a way to decrease the height of the navbar?
Before I used Gravitybox to do so but no longer possible because I upgraded to Nougat.
Nexus5x
Android 7.1.2
rooted
leisurebird said:
Is there a way to decrease the height of the navbar?
Before I used Gravitybox to do so but no longer possible because I upgraded to Nougat.
Nexus5x
Android 7.1.2
rooted
Click to expand...
Click to collapse
Stock is 48dip. How small do you want it? Here is my thread and there are probably others that do it as well.
https://forum.xda-developers.com/nexus-5x/themes-apps/mods-7-1-1-official-statusbar-navbar-t3515355
Thanks! Despite searching quite some time I didn't come across your thread. Will give it a try asap. 3 questions:
Even if I only want smaller navbar, I still need to flash the minit app and the signature file?
And what's the difference btw navbar and dynamic navbar?
Will the stock nougat navbar tweaks still be available afterwards?
Sent from my Nexus 5X using XDA-Developers Legacy app
leisurebird said:
Thanks! Despite searching quite some time I didn't come across your thread. Will give it a try asap. 3 questions:
Even if I only want smaller navbar, I still need to flash the minit app and the signature file?
And what's the difference btw navbar and dynamic navbar?
Will the stock nougat navbar tweaks still be available afterwards?
Sent from my Nexus 5X using XDA-Developers Legacy app
Click to expand...
Click to collapse
If all you want is a smaller navbar, in the Aroma options, just choose the size you want. The navbar size is a framework mod and does not require the base. However, for anything else to work you must flash a base first or you systemui will fc. After flashing a base you will need to choose the navbar height you want again. The base is 36 dip.
The 3 Minit resources app is only necessary if you choose to flash the 3minit mod. Dynamic navbar is where your navbar changes to the same color as the statusbar but it doesn't work for all apps. Signature disable can help make your System easier to mod by disabling signature checks. :laugh:

immersive nav bar for Stock Oreo.

Hello guys. I just wanna share my humble contribution to Xz xda community.
Today i'm uploading a mod that "remove" navbar add the possibilty to add a immersive navbar like LG G3 does.
I'm not responsable if my mod brinks your device (I hope it don't do it). Keeps the ftf file near by. Lol
I'm not ready to give the respective credits to guys that help did this mod. Next step I will.
You Will need install simple control or any other softkeys program to add a immersive navbar Before apply my patch, because you Will have no navbar to configure privileges and other stuffs after flash it.
Don't use a diferent immersive mod version that your stock rom or you Will get an infinite crash pop-ups....
Install method:
Flash zip in twrp recovery as any other flashable zip.
Expect that someone enjoy it!
Screenshot:
New release for last stock firmware:
Now I create an all "immersive" bar mod. No status bar. If you wanna invoke it, you can configure the navbar shortcut to do it!
Updated to last stock firmware: 99.
Did it without root, both nav and notification bar
Custom navigation bar on Google play
Fl1nt91 said:
Did it without root, both nav and notification bar
Custom navigation bar on Google play
Click to expand...
Click to collapse
Were you actually able to substitute the navbar, or just make it disappear, like in immersive mode? Are you on Oreo?
Hey Guys,
I just wanted to inform you that there is an app on the play store, that does the same thing
https://play.google.com/store/apps/details?id=com.zacharee1.systemuituner
I updated the mod to the Last stock firmware 107.
888Leander said:
Hey Guys,
I just wanted to inform you that there is an app on the play store, that does the same thing
https://play.google.com/store/apps/details?id=com.zacharee1.systemuituner
Click to expand...
Click to collapse
Dear 888Leander, all mods that I have tested cause a incredible lsgs tô wake up screen. Sometimes I need to force restart my Phone to access my apps. This get me a so angry.
After all, all programs take enable immersive Mode don't give me all screen space: eg: home screen and Facebook.
Note the bluebar at screen bottom.
So I prefer to apply a mod that remove navbar snd statusbar once for all and add a "immersive navbar".
This is my prefer setup. Maybe your is good for you.
bruno$0 said:
Dear 888Leander, all mods that I have tested cause a incredible lsgs tô wake up screen. Sometimes I need to force restart my Phone to access my apps. This get me a so angry.
After all, all programs take enable immersive Mode don't give me all screen space: eg: home screen and Facebook.
Note the bluebar at screen bottom.
So I prefer to apply a mod that remove navbar snd statusbar once for all and add a "immersive navbar".
This is my prefer setup. Maybe your is good for you.
Click to expand...
Click to collapse
I'm not using immersive mode
Maybe you didn't know about the app (that's what I thought).
Updated to Last stock firmware.
Updated to Last stock firmware 149!
bruno$0 said:
Updated to Last stock firmware 149!
Click to expand...
Click to collapse
Is it the file in the second post v1.1? For 149?
Do I just flash in twrp and done? Unless other configuration is required..
Updated to Last stock version.
nahsha said:
Is it the file in the second post v1.1? For 149?
Do I just flash in twrp and done? Unless other configuration is required..
Click to expand...
Click to collapse
Wops... Missed zip file for 149....
Just install simple control from play store, configure it as u wish, give permission and flash my zip file over twrp.
I Will upload next version soon.
Updated to Last stock firmware.
Zip for 171 firmware.
You can try this advice.
I am enjoying Pie like gestures.
bruno$0 said:
Zip for 171 firmware.
Click to expand...
Click to collapse
Can you please make one for xperia xz So-01J 8.0..? thanks.

ADB Mod installer Android 11

This is in place until TWRP is ready. You need root and of course you need to be attached to your PC. On first installation of systemui base, a pop-up asking to give ADB shell root permission will show. Please do so.
The purpose of this installer is to generate for you a custom module that you can flash in Magisk Manager. It will have all the mods that you have selected from the installer menu.
Custom clocks (date, etc) and internet speed indicators do not change colors due to light-dark background colors like the statusbar icons do.
The developer of Active edge gave me permission to use his base so that people would not have to make a choice between his and my mods. All credit for this goes to him. You must delete the active edge sense module and use one of my active edge modules. If it doesn't say active edge then it isn't active edge sense compatible. If there is an issue with edge sense after flashing, do not contact edge sense op with issues. He does not troubleshoot modified versions of his mod (and neither do I).
I'm also including my Pixel Launcher mod. Also a ADB Installer. You can change app drawer background-text color (separately for light mode and dark mode), remove weather from Launcher. Change the number of hot seat icons on home page (and size) as well as change the number of columns in the app drawer.
ADB Installer Instructions-Root is required
1. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work.
2. FLASH ALL THE MODS YOU WANT. ONCE YOU DONE WITH EVERYTHING, FLASH THE "COMPLETE INSTALLATION" Option. This will create a Magisk Manager flashable zip in a folder on your sdcard called ozop. Flash that to install your selection of mods.
Root required
Instructions.
1. Unzip ADB Mods Installer Files.zip on your PC
2. Run TulsadiverModsInstaller.bat (Give ADB Root Permissions)
3. ADB debugging Enabled
4. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work
5. Go through the other options selecting what all mods you want. It is generally best to start at the top and work your way down.
6. Once finished with selections, run "Complete Installation" at the bottom. This will generate your mymagisk.zip module in a folder called "ozop" on your sdcard.
List of MODS Available
Clock Format and Position Mods
Internet Traffic Speed Single Indicator (changes from upload-download) otherwise signals are over/under
Choose Traffic Speed Indicator Up-Down Icon Colors (default is white)
Navbar Height Options
Navbar Swap
Remove NavBar
3 Minit Battery
One percent custom battery Mods-Several to choose from
One percent custom battery Text-only-Several to choose from
Colored Statusbar-Navbar Icons
Choose number of QS columns 3-7
Colored Statusbar Icons
Remove Carrier Text Options
Smaller LTE Icon
ADB Module maker uploaded 3-5-21
ADB Mod Installer Files11Pixel3aXLMar.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------------------------
If I helped, hit the Thanks Button!
Feeling generous, send me a beer!
--------------------------------------------------
--------------------------------------------------------------------------------------
Pixel Launcher Mod
Start by picking a base. Bases come with, or without, a search bar and Hotseat heights The larger number of rows you pick, the lower your hotseat drops on your home screen. If your hotseat comes out too low, try again with a higher base.
Remove Search Bar
App Drawer background color (Light and Dark Mode)
App Drawer Text Color or remove (Light and Dark Mode)
Home screen App Text Color
Smart-screen Text color
App Icon Sizes 45-50-56 dip (56 is stock)
Columns (5-6-7)
Rows (5 through 11)
ADB Pixel Launcher Installer uploaded 6-18-20
https://www.androidfilehost.com/?fid=8889791610682873110
Zip Installer
Unzip zip into a folder on your internal sdcard. The folder name cannot have spaces in it.
Boot TWRP, find your folder. Install base first. Install the mods you want, then flash complete installation zip. Reboot.
TWRP zip Installer
https://www.androidfilehost.com/?fid=8889791610682873111
@Tulsadiver is there a center clock option with this? Or just left and right
mac796 said:
@Tulsadiver is there a center clock option with this? Or just left and right
Click to expand...
Click to collapse
There are center clock options. Only the "center clock" option turns dark on light statusbars and visa versa. The others are text clocks and therefore stay white ( unless you choose to set a statusbar icons color).
Tulsadiver said:
There are center clock options. Only the "center clock" option turns dark on light statusbars and visa versa. The others are text clocks and therefore stay white ( unless you choose to set a statusbar icons color).
Click to expand...
Click to collapse
thanks I'm going to give it a shot today I'll let you know if it works for me or not
Tulsadiver said:
There are center clock options. Only the "center clock" option turns dark on light statusbars and visa versa. The others are text clocks and therefore stay white ( unless you choose to set a statusbar icons color).
Click to expand...
Click to collapse
Thank you, I got everything to work except selecting more in a row for qs tiles. That's the only one that wouldn't install after selecting and pressing enter. This is great, I appreciate you putting the navbar swap back in.
mac796 said:
Thank you, I got everything to work except selecting more in a row for qs tiles. That's the only one that wouldn't install after selecting and pressing enter. This is great, I appreciate you putting the navbar swap back in.
Click to expand...
Click to collapse
What bases did you install? How many columns did you want?
Tulsadiver said:
What bases did you install? How many columns did you want?
Click to expand...
Click to collapse
I just installed the stock like bases because I'm using Swift theme installer, do I need to pick a colored one I've never used a colored one on any of the other pixels. I want 5 column. I did try the other 2 columns in there they wouldn't install. I love having 3 minit battery back, and center clock
mac796 said:
I just installed the stock like bases because I'm using Swift theme installer, do I need to pick a colored one I've never used a colored one on any of the other pixels. I want 5 column. I did try the other 2 columns in there they wouldn't install. I love having 3 minit battery back, and center clock
Click to expand...
Click to collapse
Did you do them last?
Tulsadiver said:
Did you do them last?
Click to expand...
Click to collapse
I did the bases first, then everything else together. I tried going in and doing the 5 column again after the reboot
mac796 said:
I did the bases first, then everything else together. I tried going in and doing the 5 column again after the reboot
Click to expand...
Click to collapse
I think I found the problem. Take this zip. Rename it by taking .zip off of the name (it wasn't actually zipped), replace the file in the bats folder with this one and try again.
Tulsadiver said:
I think I found the problem. Take this zip. Rename it by taking .zip off of the name (it wasn't actually zipped), replace the file in the bats folder with this one and try again.
Click to expand...
Click to collapse
Thank you. That did the trick. Worked great.
mac796 said:
Thank you. That did the trick. Worked great.
Click to expand...
Click to collapse
An updated installer has been uploaded to op.
We're you able to add and get 3 minit battery to work?
I have Swift Installer in place now .... All looks good, including notifications (that sometimes get jacked up)
I just would like Center Clock, 3 minit Battery (without stock) , and 6 or 7 QS tiles ...... I'd it possible to just add those things without messing up the Swift installer theming??
BTW. Thank you for your work
jcrompton said:
We're you able to add and get 3 minit battery to work?
I have Swift Installer in place now .... All looks good, including notifications (that sometimes get jacked up)
I just would like Center Clock, 3 minit Battery (without stock) , and 6 or 7 QS tiles ...... I'd it possible to just add those things without messing up the Swift installer theming??
BTW. Thank you for your work
Click to expand...
Click to collapse
It should work okay. No guarantees.
jcrompton said:
We're you able to add and get 3 minit battery to work?
I have Swift Installer in place now .... All looks good, including notifications (that sometimes get jacked up)
I just would like Center Clock, 3 minit Battery (without stock) , and 6 or 7 QS tiles ...... I'd it possible to just add those things without messing up the Swift installer theming??
BTW. Thank you for your work
Click to expand...
Click to collapse
I'm using all those things you mentioned with swift installer. I did uninstall Swift installer then flashed all my mods then reinstalled. I pick stock bases in the mod
mac796 said:
I'm using all those things you mentioned with swift installer. I did uninstall Swift installer then flashed all my mods then reinstalled. I pick stock bases in the mod
Click to expand...
Click to collapse
so im trying to use it and it gives me a permission denied
MVNO DeSIngS said:
so im trying to use it and it gives me a permission denied
Click to expand...
Click to collapse
I'm not sure how you have your adb environment set up. I have mine so I can do it from anywhere. I would try the command adb devices wherever you have that file saved and make sure your phone's communicating with it. And if that doesn't work you probably going to have to save it wherever your platform tools is saved. I'm not sure.
mac796 said:
I'm not sure how you have your adb environment set up. I have mine so I can do it from anywhere. I would try the command adb devices wherever you have that file saved and make sure your phone's communicating with it. And if that doesn't work you probably going to have to save it wherever your platform tools is saved. I'm not sure.
Click to expand...
Click to collapse
will do thank you
mac796 said:
I'm using all those things you mentioned with swift installer. I did uninstall Swift installer then flashed all my mods then reinstalled. I pick stock bases in the mod
Click to expand...
Click to collapse
Did you do the mods all at once or did you do them one at a time?
jcrompton said:
Did you do the mods all at once or did you do them one at a time?
Click to expand...
Click to collapse
I did the base and the framework together first. And then I did everything else together. So two times.

3Minit Battery and 3Minit Clock Mods

I've patched a way so that additional 3Minit batteries can be can be installed on Stock Android 10.
These mods can be found here:
https://github.com/gharrington/3Minit_Battery_Mod
and here:
https://github.com/gharrington/3Minit_Clock_Mod
Explanation as well as a guide for the 3Minit Clock mod is here:
https://forum.xda-developers.com/android/apps-games/3minit-clock-mod-v1-0-t3400221
Attached is the 3Minit Settings app. Install like any app.
You no longer have to flash the minitbatteryresources.apk separately since it is included in the 3Minit zip. The MinitClock.apk is included where applicable.
If you are using active edge, delete the Active Edge module first.
Flash in Magisk manager
These are SystemUI mods and might not be compatible with any other SystemUI Mods you may have installed.
---------------------------------------------------------------------------
Android 12.1
Uploaded 7-8-22
July update
3Minit Battery
https://mega.nz/file/cAojHQZI#oZ_jKr5SjMt9RCaegFUGdrD6JaguyCNr0jWy8leDdLI
3Minit Center Clock
https://mega.nz/file/IAgDWYYK#AF_rZDX33IYqxNXg5Yfc-lLF4NcXuGO4muQ8D8_6u9I
3Minit Right Clock
https://mega.nz/file/YV53EKpZ#gAw4eHdoCWyTcmIQ9MS6hZtAjxcnmYkMikx04zwA52Y
----------------------------------------------------------------------------
Android 12
Uploaded 2-9-22
February update
3Minit Battery
3Minit.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
3Minit Center Clock
3MinitCC.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
3Minit Right Clock
3MinitRC.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
----------------------------------------------------------------------------
Android 11
Uploaded 10-6-21
3Minit Battery
3Minit.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
3Minit Center Clock
3MinitCC.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
3Minit Right Clock
3MinitRC.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
3Minit Clock
3MinitClock.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
3Minit Battery and Clock
3MinitBattClock.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------------------------
If I helped, hit the Thanks Button!
Feeling generous, send me a beer!
--------------------------------------------------
does this work for pixel 4 xl?
mydjtl said:
does this work for pixel 4 xl?
Click to expand...
Click to collapse
mydjtl said:
does this work for pixel 4 xl?
Click to expand...
Click to collapse
I just uploaded newer 3minit zips.
Hi, Tulsadiver, thank you for your great mods. Today, I tried to flash 3minitresoure apk using magisk but unfortunately , the mods didn't install in system/app. I used file explorer apk to find the installation. PLease let know if I do anything wrong. Since, i got bootloop every time.
[email protected] said:
Hi, Tulsadiver, thank you for your great mods. Today, I tried to flash 3minitresoure apk using magisk but unfortunately , the mods didn't install in system/app. I used file explorer apk to find the installation. PLease let know if I do anything wrong. Since, i got bootloop every time.
Click to expand...
Click to collapse
The only reason I can think of is that you installed something else of mine that might have the same module prop as the minitbatteryresources.apk.
I did clean installation of the firmware then root with magisk canary debug and install your module.
[email protected] said:
I did clean installation of the firmware then root with magisk canary debug and install your module.
Click to expand...
Click to collapse
Then I don't know what is causing your problem. It works on all of my Pixels.
The minitbatteryresources.apk would not be in a folder by itself like the other system apps but would be at the bottom of the system/app folder.
I flashed the zips in the OP through magisk manager. But, now my screen is black except for a flashing clock in the upper left hand corner. Is there any way to recover my phone?
J.L.C. said:
I flashed the zips in the OP through magisk manager. But, now my screen is black except for a flashing clock in the upper left hand corner. Is there any way to recover my phone?
Click to expand...
Click to collapse
When I encounter bootloops, I use this.
https://forum.xda-developers.com/pixel-4-xl/help/magisk-modules-disabler-booting-magisk-t3990557
Tulsadiver said:
When I encounter bootloops, I use this.
https://forum.xda-developers.com/pixel-4-xl/help/magisk-modules-disabler-booting-magisk-t3990557
Click to expand...
Click to collapse
Perfect!
I was getting errors booting the magisk core-only image, but it's because it was outdated. This worked!
[email protected] said:
I did clean installation of the firmware then root with magisk canary debug and install your module.
Click to expand...
Click to collapse
Try this one..
https://www.androidfilehost.com/?fid=4349826312261715456
J.L.C. said:
Perfect!
I was getting errors booting the magisk core-only image, but it's because it was outdated. This worked!
Click to expand...
Click to collapse
Op has been updated. It appears the "installminitbatteryresourcesapk" file needed updated.
Tulsadiver said:
Try this one..
https://www.androidfilehost.com/?fid=4349826312261715456
Click to expand...
Click to collapse
Working great now. Thanks a million.
Is there a trick to "apply" the batteries? I flashed everything, selected a modified battery in 3minit settings, and rebooted, but I still have the stock battery
The file in link for the adb bat files in the OP was removed. Will the files for the Pixel work on the 4XL?
J.L.C. said:
Is there a trick to "apply" the batteries? I flashed everything, selected a modified battery in 3minit settings, and rebooted, but I still have the stock battery
The file in link for the adb bat files in the OP was removed. Will the files for the Pixel work on the 4XL?
Click to expand...
Click to collapse
Do you flash two magisk modules?
3Minit Module last uploaded " Jan 13, 2020 "
DinarQ8 said:
3Minit Module last uploaded " Jan 13, 2020 "
Click to expand...
Click to collapse
Grabbed the wrong one. It's been fixed.
Changed and added a few things like 3Minit Clock mod.
Hi @Tulsadiver
How i do get work 3Minit Battery with EdgeSense
I flashed " 3Minitedge.zip and 3MinitBatteryChanger then i download EdgeSense form play store and i flashing Active Edge mode. Everything work fine with 3MinitBattery but when i flash Active Edge mode 3MinitBattery stop working
Thanks
Sent from my Pixel 4 XL using Tapatalk

Categories

Resources