[CLOSED][TOOL] [9.0/10.0] Stock-Rom Flash Tool Nokia 7.2 [DDV_sprout] - Nokia 7.2 ROMs, Kernels, Recoveries, & Other Devel

[CLOSED][TOOL] [9.0/10.0] Stock-Rom Flash Tool Nokia 7.2 [DDV_sprout] - Nokia 7.2 ROMs, Kernels, Recoveries, & Other Devel

XDA:DevDB Information
Stock-Rom Flash Tool Nokia 7.2
Contributors
Raghu varma , hikari_calyx
Source Code:
https://github.com/RaghuVarma331/Nokia-Tool.git
Version Information
Status: Stable
Current Stable Version: 1.5
Stable Release Date 2019-12-23
Created 2019-12-23
Last Updated 2020-04-07

Now Some common Questions
Q1. we still receive monthly updates?
A. obviously you will receive updates as like before
Q2. Can we try this on Locked Bootloader?
A. No
Q3. Can we use this without Adb Tools?
A. No
Q4. Can we use this tool on any Android version?
A. Yes works On Oreo , pie & Q but keep this point in your mind update your platform tools time to time due to For Q & Pie & Oreo all these 3 having different different platform tools so if you face any erros don't get scared just download latest adb platform tools

Hi there
First off thank you for your work on the Nokia 7.2, it's good to see someone doing stuff for this phone.
I have a couple of requests to make specifically related to this tool.
Firstly, is it possible to release the full sources of the tool? On your GitHub repository there's only one file related directly to the tool (Form1.cs), and the naming inside the file is all still the auto-generated code from the WIndows Forms designer in VS, which makes it very difficult for anyone to contribute simply because it's hard to figure out what's going on.
Secondly, as a continuation of the first issue, I see that you added entries to the flashtool to flash the 1.400 build for Nokia 7.2 (as per your Telegram channel - POST), however this release is not on the GitHub page. The last release was the original release on 23rd December 2019. I also checked your SourceForge page, however the tool doesn't appear there. This feeds back into the first issue where if I had the full source I could compile and flash the new ROM myself.
If you could at least upload the full source code for the first request, I would happily fork it and clean up the code a bit, even make it so you don't have to manually update the code every time a new release comes out.
Otherwise, keep up the great work man
R

Riccorbypro said:
Hi there
First off thank you for your work on the Nokia 7.2, it's good to see someone doing stuff for this phone.
I have a couple of requests to make specifically related to this tool.
Firstly, is it possible to release the full sources of the tool? On your GitHub repository there's only one file related directly to the tool (Form1.cs), and the naming inside the file is all still the auto-generated code from the WIndows Forms designer in VS, which makes it very difficult for anyone to contribute simply because it's hard to figure out what's going on.
Secondly, as a continuation of the first issue, I see that you added entries to the flashtool to flash the 1.400 build for Nokia 7.2 (as per your Telegram channel - POST), however this release is not on the GitHub page. The last release was the original release on 23rd December 2019. I also checked your SourceForge page, however the tool doesn't appear there. This feeds back into the first issue where if I had the full source I could compile and flash the new ROM myself.
If you could at least upload the full source code for the first request, I would happily fork it and clean up the code a bit, even make it so you don't have to manually update the code every time a new release comes out.
Otherwise, keep up the great work man
R
Click to expand...
Click to collapse
Well thanks for your feedback. But if you are familiar with visual studio. You won't say it is auto generated but the thing is formula which i used is same for 6 different handsets. But still SLD DDV is almost same but the thing is there is no rule to upload source code expect kernel sources until its related to Android operating system. But still i provided the main thing which contains everything in form1.cs well the thing is ui can't be run on another visual studio directly. If you know this point then you won't ask for full source code. Apart from your questions. You can't compile rom.zip because it's actually based on OTA.zip converted to fastboot with my shell script if you are familiar in all these definitely you won't ask about source code and zip and compilation stuff

How enter to download mode?
Nokia 6.2

Hello there,
I successfully installed the Android 10 Stock-ROM on my Nokia 7.2 some Weeks ago (Android 10.0.0 DDV2250 HOME BREW (March 2020)).
Today I received the first OTA-Update (V2.270) but I'm unable to install it. My Device is allways showing "Installationproblem" after a few Seconds.
How can I fix this?
I only unlocked the Bootloader to flash the Stock-ROM, there is no root, custom recovery or anything like that.
Thanks in advance!

raghu varma you r working hard keep it up

Since this tool works on Windows only, have you ever planned on releasing one for Linux?
I had three Xiaomi devices before I bought Nokia 7.2 and all of them had some sort of shell script, which worked flawlessly on my Linux distribution. I would be so happy to have a tool that works on Linux as well.

eX1337 said:
Hello there,
I successfully installed the Android 10 Stock-ROM on my Nokia 7.2 some Weeks ago (Android 10.0.0 DDV2250 HOME BREW (March 2020)).
Today I received the first OTA-Update (V2.270) but I'm unable to install it. My Device is allways showing "Installationproblem" after a few Seconds.
How can I fix this?
I only unlocked the Bootloader to flash the Stock-ROM, there is no root, custom recovery or anything like that.
Thanks in advance!
Click to expand...
Click to collapse
You can try to flash A and B to Stock and then try to update again. In case you thought that the downloaded files where Bad, you can download a newer full-update.zip and then make your own homebrew.

This tool doesnt do anything to the phone. It claims its rebooting the phone but nothing happens, even after waiting for well over 10 mins.

Same here as Talon Pro. Installed the stock like in instruction, rebooting the phone and android screen is freezing like forever...
any solutions?

You can alternative try downloading the Firmware from https://fih-firmware.hikaricalyx.com. Maybe, this script works better for you. All things flashed, a&b! Normaly, you can't do something wrong.

Hello,
i have from my friend this nokia 7.2 and is sw bricked...stuck on green logo.
I want to flash back stock firmware, but bootloader is locked and is impossible to enable oem unlock.
Only way how to bring it back to live is test to flash all roms for find correct one?
...i have tested switching slots...and still stuck

Can we flash it without ost

need nokia7.2 qfil file my phone daed now

CornholioGSM said:
Hello,
i have from my friend this nokia 7.2 and is sw bricked...stuck on green logo.
I want to flash back stock firmware, but bootloader is locked and is impossible to enable oem unlock.
Only way how to bring it back to live is test to flash all roms for find correct one?
...i have tested switching slots...and still stuck
Click to expand...
Click to collapse
same here

I cannot find DDV_sprout in location:
https://sourceforge.net/projects/ddv-sprout/files/HMD-RVDP/
This location was mensioned in:
[CLOSED] [FREE] [9.0,10.0 &11.0] Bootloader unlock for Nokia 7.2 [2021-06-22]
Free Bootloader unlock for Nokia 7.2 Well , after 2 years finally the dream come true. yes , we achieved what we seen in the title of my thread. atlast free bootloader unlock for Nokia 7.2 running on any android version especially android 10 &...
forum.xda-developers.com
Where to find proper DDV_sprout for Nokia 7.2 to unlock bootloader?

Thread closed on request of OP @Raghu varma

Related

[CLOSED][TOOL] [8.1.0/9.0/10.0] Stock-Rom Flash Tool Nokia 6.1 Plus [DRG_sprout]

XDA:DevDB Information
Stock-Rom Flash Tool Nokia 6.1 Plus
Contributors
Raghu varma , hikari_calyx
Source Code:
https://github.com/RaghuVarma331/Nokia-Tool.git
Version Information
Status: Stable
Current Stable Version: 1.5
Stable Release Date 2019-01-26
Created 2019-10-1
Last Updated 2020-04-07

Now Some common Questions
Q1. we still receive monthly updates?
A. obviously you will receive updates as like before
Q2. Can we try this on Locked Bootloader?
A. No
Q3. Can we use this without Adb Tools?
A. No
Q4. Can we use this tool on any Android version?
A. Yes works On Oreo , pie & Q but keep this point in your mind update your platform tools time to time due to For Q & Pie & Oreo all these 3 having different different platform tools so if you face any erros don't get scared just download latest adb platform tools

changelog
========
* v-1.5
* slightly polished

changelog
* Added Payload support

Thanks for the tool!
But for me it gets stuck "waiting for devices". I have installed the latest ADB/Fastboot tools and my phone is plugged in download mode

changelog
12/17/2019
* Added DRG354E JUNE 2019 Nbo Unpacked Link

Raghu varma said:
changelog
12/17/2019
* Added DRG354E JUNE 2019 Nbo Unpacked Link
Click to expand...
Click to collapse
After flash stock rom my device is locked bootloader or not ?????

Changelog
12/23/19
1. Nuked scripts
2. Add GUI exe support

bbighouse said:
Thanks for the tool!
But for me it gets stuck "waiting for devices". I have installed the latest ADB/Fastboot tools and my phone is plugged in download mode
Click to expand...
Click to collapse
Me too, anybody can help me? plz

Hi, Thanks for the fine tool!
Unfortunately some apps still label my 6.1 plus phone as (rooted)
Even after I flashed the DRG354H home B stock rom,
Everything went well, but the postoffice app here refused to log me in, saying that my phone is rooted! and its not!
Kindly if there is any fix to wipe the phone clean of any former root traces I'd be most grateful.
or if there is a full stock firmware file download link would be the best.
Nokia 6.1 plus bootloader unlocked.

Thanks, the 10 worked flawlessly ..
Sent from my Nokia 6.1 Plus using Tapatalk

gaban05 said:
Thanks, the 10 worked flawlessly ..
Sent from my Nokia 6.1 Plus using Tapatalk
Click to expand...
Click to collapse
Do you have the:
"device not certified"
under the playstor settings play protection?
Or its something we have to accept with our unlocked bootloaders.

dark4m said:
Do you have the:
"device not certified"
under the playstor settings play protection?
Or its something we have to accept with our unlocked bootloaders.
Click to expand...
Click to collapse
Yes I do have the same. Not sure the effect tho
Sent from my Nokia 6.1 Plus using Tapatalk

gaban05 said:
Yes I do have the same. Not sure the effect tho
Sent from my Nokia 6.1 Plus using Tapatalk
Click to expand...
Click to collapse
I'm not 100% sure. But sinse more than a month ago my phone stopped getting any OS updates.
I got the feeling google is preventing uncertified phones from getting any OS updates. I hope I'm wrong though.

dark4m said:
I'm not 100% sure. But sinse more than a month ago my phone stopped getting any updates.
I got the feeling google is preventing uncertified phones from getting any OS updates. I hope I'm wrong though.
Click to expand...
Click to collapse
I never been able to update my phone since Pie.
Sent from my Nokia 6.1 Plus using Tapatalk

Help me
So after installig a new version of android my phone is completly resetted?

ertocaa said:
So after installig a new version of android my phone is completly resetted?
Click to expand...
Click to collapse
If you use this tool, yes your phone will be completly reset
Sent from my Nokia 6.1 Plus using Tapatalk

So everyone is pretending not to see my requests on unlocking bootloader? I want to unlock the damn bootloader how much do I need to pay?
Reason is Gcam won't work after android 10 update which is very had for me can't take cool pictures in campus again ?? now the girls are resorting to the iPhone guys

Rahmony said:
So everyone is pretending not to see my requests on unlocking bootloader? I want to unlock the damn bootloader how much do I need to pay?
Reason is Gcam won't work after android 10 update which is very had for me can't take cool pictures in campus again now the girls are resorting to the iPhone guys
Click to expand...
Click to collapse
Can you be polite with your words, please? People are not getting paid to answer questions like yours.
Currently, there are no official unlock methods for ANY Nokia phones. But it still unlockable by unofficial means. You can search Google for that. Try searching for bootloader unlock service from techmesto or hikary. It costs around $5 to $8 depending on the status of your phone. Google is your friend, mate.
I hope you have a good day.

Reverting from 10 to 9
can i use this guide to go back to android 9 from 10? Help Required on this

[ROM][UNOFFICIAL][Android 11] LineageOS 18.1 [joyeuse/miatol][22/01/21]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
We have progressed to LineageOS 18.1
Flash instructions :
Use latest pbr recovery for miatol, supports decryption - beta available here, https://pitchblackrecovery.com/joyeuse/.
DO NOT - Wipe data!, ONLY FORMAT, otherwise you may hose the phone.
There is a way to fix this without the fastboot factory clean, flash and lock with the official Xiaomi tool, which was forcing you to clean and lock... now available here: https://github.com/Szaki/XiaomiADBFastbootTools
If you hose the phone, use this tool - you need to install JRE though, as the tool is Java base. Put your phone is fastboot, use the tool to download the latest global rom (or whichever). Then go to where its downloaded, extract the .xy/tar file, then go back into the tool and under "image" select the folder INSIDE the folder you just extracted, then select "clean install" and install it. This will flash the majority of imgs but will error out at the end and be unable to create the "user data" partition.
That's okay, because all of the partitions will be setup again, and you can flash any rom you want again. So when its done, and still in fastboot, fastboot flash recovery recovery.img (recovery.img being the latest joyeuse pbr recovery, you renamed to recovery.img and were in that folder in the command prompt, so it will flash that recovery) or use the tool to select that recovery and it will flash it for you and reboot into for you if you like.
(Do this step last, after Magisk, if you want to unencrypt, no worries if you don't unencrypt - PBR recovery will decrypt your data ON THE SECOND TRY OF ENTERING YOUR SCREENLOCK PIN NUMBER...), the new PBR Miatol Beta 10/14/20, fixes this issue, it is now decrypted on the first entry of the phone's lockscreen PIN. Then flash disable_dm-verity_forceencrypt.zip available here for those who want decrypted data partition: https://zackptg5.com/android.php#disverfe and other places as well.
If you are encrypted and decide to unencrypt later, you will need to flash the disable_dm-verity_forceencrypt.zip in miatol recovery, then format data. Store roms, gapps, recoveries (just in case), disable_dm-verity, magisk install and uninstall and all that stuff on the SD card, so you can use them in PBR after you format DATA (the first step after installing PBR miatol recovery), just FYI. Then do the following:
Flash ROM
Flash OpenGAPPS for android 11 nano
Boot into android, make sure its working and install Magisk Manager 8.0.7, then reboot into recovery and install Magisk 21.4 (in recovery, I did not need to extract the boot.img and patch in Magisk Manager, and reboot into recovery to flash the patched boot.img, but your results may be different): https://github.com/topjohnwu/Magisk/releases. If you want to unencrypt (no guarantees its permanent though) you need to format data, THEN FLASH MAGISK, then flash disable_dm-verity (always the last step)- I usually wipe dalvik and cache too.
USE LATEST MIATOL PBR RECOVERY, PLEASE.
SD card issues resolved with the implementation of the EXFat android driver.
Source Code: https://github.com/LineageOS
Kernel Source: https://github.com/Redmi-SM6250 or Stock kernel from Miui
Apologies for the lack of updates, was diagnosed with stage 4 metastatic cancer and this project was not on my priority list anymore...
Update 28/1/21:
Release notes:
LineageOS
Device: Unified (Miatoll)
Developers: ScaryMen1325 & Loptr4
ROM Version: 18.1
Android Version: Android 11
Build date: 22/01/2021
Status: UNOFFICIAL
Changelog:
• Fixed power related issues
• Added useful apps (thanks to Dev: Emulond for that)
• Other fixes and performance improvements
Notes:
• It's 2nd test version, if you found bugs, give log.
• Using loki kernel by default, haven't tested custom kernel.
Download here:
https://drive.google.com/file/d/1M5-cRBfrRdBdNYGzy5G9bOa1Ncf5JkE4/view?usp=sharing
Please note this is a unified release, you should do a clean install unless you're coming from a unified ROM alreadyl.
Will keep you more regularly updated now that I'm out of the hospital....

Perfect will try tonight

Belpek said:
Perfect will try tonight
Click to expand...
Click to collapse
Have you tried it?
How is it? Good for daily?

There are so many Joyeuse LineageOS ROMs I don't even know where to start.

i don't see you mentioned mobile network in bugs section; does it work? i'll try this rom in a couple hours

Tell me please. If phone will be locked with black screen and i say "ok google". Will it work? Or it will work only if screen is unlocked?

sorry if its not much, since i can't do much on this rom. flashed nikogapps, google sign-in succeded but it seems that i cant install anything from play store.
(dumb me forgot to screenshot, it only says "something went wrong" when i try to install an app from play store)
about ok google from lockscreen/screen off, i tried it, also not working. can't confirm about volte since volte still relatively new here and hasn't developed that much.

Why nikgapps? Open gapps nano is recommended.
Sent from my Redmi Note 9 Pro using Tapatalk

Flash it and using it by now, so far so good, sometimes it gets a little freeze but nothing serious, miracast reboots phone so dunno if this is a bug or not, proximity sensor is another one cuz while I was in speaking with my pal screen was on all the time and my ear activated bluetooth and DND
Have nothing to talk about VoLTE cuz in my country is not available.
ANX modules left my phone in bootloop so instead I went for GCam. Flash unofficial opengapps nano and make sure to use Wi-Fi to complete the first run.
Magisk canary works so it can be rooted.
Keep the hard work!
*Sorry if I made some writing mistakes, english is not my native language. Cheers!!

Tried flashing the latest build (02.10.20) using the latest TWRP from the thread you linked but I get the "can't install package over new build" error. Is it required to come from stock miui?

gigahurts said:
...
Newer Build:
https://mega.nz/file/PlkgiSzS#C_tIspgbtGDrweztQ83lADHyEQf4dTkIUiSAqgjVAFk
NOTE: You should be on 11.0.7.0 QJZMIXM (EU) Global firmware for this build. Also, I have a newer build, but its not ready for primetime and has issues with SMS and Call Log enabling permissions.
Oh, and BTW, if you hose your ROM/Phone, just flash vbmeta.img in fastboot to avoid using the factory fastboot img flash, otherwise you many need to wait another 7 days to unlock the bootloader.
...
The dev for this build is: @wight554, all thanks and credit go to him, he is awesome, and I, for one, seriously appreciate this ROM as it works very well for me. It is so snappy and smooth, with a super fast boot time, no reboots and generally pretty frickin AWESOME!
...
Click to expand...
Click to collapse
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.

Swiftor said:
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.
Click to expand...
Click to collapse
hey Swiftor,
We will continue to work on this rom. LineageOS has been around a long time, development has spread across so many devices, however, the hardware of many devices is very similar, so support will continue. The last Redmi Note 8 pro, had a mediatek SOC, and made development difficult until MIUI decided to release its source. The snapdragon platform is very mature and is more easily and readily available to develop roms for. Redmi Note 10 pro has been released in India, and has a slightly better processor 765g vs 730g, but the kernel and hardware are very similar, so I development for this phone and the Note 10 pro should parallel and continue. We are working on submitting an official 18.0 release, but have to have all hardware (and software) fully functional and as close to zero bugs as possible. I predict development to continue as long as Xiaomi continues to release new MIUI roms for this device (and they continue to release roms for phones much, much older than this).
I have updated the first post with a newer release. Let me know if you have any issues and I will try to help.
Thanks for the props too

does magisk 21 work on the latest build? really excited for android 11

So this will not be compatible with curtana devices?

Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.??

everything is working perfectly and its showing charging rapidly , it was on 88% and showing 10 minutes until full
everything is completely smooth gonna keep it for my daily use

Bantryred said:
Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.
Click to expand...
Click to collapse
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse

there're few thing that you need to fix @gigahurts
1) you putting wrong kernel source. its should be this link
2) why would you mirror it when you can get it in his sourceforge

Why is today's build 590MB while all others are 1.1GB?

pwnaz said:
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse
Click to expand...
Click to collapse
Sorry for the delay, Im on Curtana so dont know if it makes a difference, but I used no. 16 - mi 10 Global(11)
I also had to hide Magisk Manager

Paranoid Android Ruby Beta - Oneplus 7T Pro

We are very excited to announce the release of Paranoid Android Ruby, based on Android 11.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Code Aurora Forum Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Notice
As we are growing on our list of supported devices in each release, we require of a stronger build environment so we can speed up the compilation process for releases. Based on the actual Quartz 4 list, we support over 30 devices, which takes between 2 and 3 days for all the builds to be completed without counting possible compilation issues or rebuild needs, based on our current specs.
We kindly ask all of you that are in position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate here
If you'd like to donate to me personally https://paypal.me/ritujbeniwal
Device-specific issues
None as of now.
Note: Custom kernels are NOT supported unless the kernel says it supports PA and GMS is included!
Requirements
My preferred logging format is:
adb logcat -b all -d *:E > logcat-err.log
adb logcat -b all -d > logcat.log
adb shell dmesg > dmesg.log
Instructions
Note: Make sure you have latest OOS flashed beforehand on both the slots.
Note: This will wipe your complete data partition (this includes ALL user data)
1) adb reboot bootloader
2) fastboot update <pa_fastboot_zip>.zip
3) Once the process is completed the device will reboot, press the vol-down button while the phone reboots to boot into recovery
4) Select Factory Data reset and press "Yes" (navigation via volume buttons)
5) Reboot
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Community (Telegram)
Note: This is a slightly modified version of PA and does not represent how official PA will look like.
Download Link: https://sourceforge.net/projects/aospa-extended/files/oneplus7tpro/
Security patch level: June 2021
Device Source code: https://github.com/ritujb/android_device_oneplus_oneplus7tpro
Kernel Source code: https://github.com/timocapa/GaltsGulch-sm8150
Source code: https://github.com/AOSPA
Cheers and #StayParanoid!

Here we go

Can't wait to try this. Used PA way back on my Sammy S3 and my OP3

can you post features of the rom? never used Aospa but I quess it has more features than PA which is pretty basic? thanks for your hard work

Did not work for me, got me into "Crashdump" mode.

Looks it all this wait was totally worth it, was able to boot it up without any issues, everything is working as expected, no crashes or random reboots till now, everything is so smooth and flawless really great word dev.
Thanks a ton for your hard work and the ROM.
Can be used as a daily driver for sure.
Only minor bug I noticed is while charging it shows slow charging but when checking the Ampere its actually dash charging, rest everything seems to be pin point perfect for now.
Update: Vibrate intensity is pretty low/soft, would be great if we could bump it up a bit.
Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi,
I'm having trouble successfully installing the ROM. So I was wondering if you maybe could guide/help me through the installation process since when I tried the one you listed, it got me into Qualcomm crashdump mode. Even though, I followed every step to full extend (flashing recovery and so on). But the whole process resulted in me bricking my phone, so I had to bring it back to Oxygen OS using the MSM Tool. So it would be really nice if you could provide me with some installation steps or at least some help.
Kind regards, andr052h

Same here. Followed instructions an stuck in Android Recovery with the following message after doing the Factory Data Reset:-
Cannot load Android System. Your data may be corrupt. etc.
Will reset with MSM and try again

chiiiiiiippppppp said:
Same here. Followed instructions an stuck in Android Recovery with the following message after doing the Factory Data Reset:-
Cannot load Android System. Your data may be corrupt. etc.
Will reset with MSM and try again
Click to expand...
Click to collapse
Did you have latest OOS installed first?

L4WL13T said:
Did you have latest OOS installed first?
Click to expand...
Click to collapse
Yes. Used MSM to get 10.0.13 and then upgraded to 11.0.0.2 HD01BA. Made sure was in both slots. Followed instructions exactly.
Tried 3 times and giving up and going back to PE. Shame as I used to like PA when I had my Note 3 years ago.
Device is HD1913 by the way in case that helps anyone else.

chiiiiiiippppppp said:
Yes. Used MSM to get 10.0.13 and then upgraded to 11.0.0.2 HD01BA. Made sure was in both slots. Followed instructions exactly.
Tried 3 times and giving up and going back to PE. Shame as I used to like PA when I had my Note 3 years ago.
Device is HD1913 by the way in case that helps anyone else.
Click to expand...
Click to collapse
Odd, the only other thing I can think of off the top of my head is to make sure you're flashing using fastbootd and not regular fastboot. Hopefully you'll figure it out, fantastic ROM.

Hows the FOD in this ROM?

Schemes do not work for me it always crash when i click on it so i cant change fonts etc. Any idea?

L4WL13T said:
Did you have latest OOS installed first?
Click to expand...
Click to collapse
did you try to format data then just boot into the system? usually works for me

New update is out for the ROM
June sec patch
Automatic brightness improvements
Battery life improvements
FOD animation
UI improvements

L4WL13T said:
Did you have latest OOS installed first?
Click to expand...
Click to collapse
I can't get this ROM to boot either... I MSM tooled back to 10.0.14, OTA updated and manually updated and also flashed with twrp OOS 11.0.1.1 and followed directions to the T! Either Crash Dumps, or boots back into OOS 11. Does it not work on the OOS 11 Global maybe? I really want to try this ROM! Been trying for almost 3 days now... Any advice is greatly appreciated! I have the HD1910 (Chinese variant) I had the HD0IAA global firmware installed everytime I tried if that helps at all? I also tried fastboot, and fastbootd with 3 different TWRP versions, and the lineage18.1 recovery, and the stock OOS recovery with fastbootd. Also have A and B slot on the 11.0.1.1 firmware. I used the copy partition zip and also manually flashed both slots to no avail...

parag0n1986 said:
I can't get this ROM to boot either... I MSM tooled back to 10.0.14, OTA updated and manually updated and also flashed with twrp OOS 11.0.1.1 and followed directions to the T! Either Crash Dumps, or boots back into OOS 11. Does it not work on the OOS 11 Global maybe? I really want to try this ROM! Been trying for almost 3 days now... Any advice is greatly appreciated! I have the HD1910 (Chinese variant) I had the HD0IAA global firmware installed everytime I tried if that helps at all? I also tried fastboot, and fastbootd with 3 different TWRP versions, and the lineage18.1 recovery, and the stock OOS recovery with fastbootd. Also have A and B slot on the 11.0.1.1 firmware. I used the copy partition zip and also manually flashed both slots to no avail...
Click to expand...
Click to collapse
used latest platform tool
and follow the instructions

jahidinbedod said:
used latest platform tool
and follow the instructions
Click to expand...
Click to collapse
I am using the latest platform tools. At least I thought I was? I'll check again to make sure I have the most updated version. The instructions aren't very clear either. It says to reboot to bootloader with the ADB command. That is regular fast boot. On a post a few down, it is mentioned that the only thing they could think of is to make sure to flash and fastbootd. So which one are we supposed to use? Do we use the stock OOS recovery? The only way I know to flash the newest Android 11 is from the repo thread or flashable zips. I also tried it with the OTA update and the copy partition zip still didn't work from fastbootd and fastboot. Every time I do it I get an error that there is no boot image maybe I need to redownload the ROM?

parag0n1986 said:
I am using the latest platform tools. At least I thought I was? I'll check again to make sure I have the most updated version. The instructions aren't very clear either. It says to reboot to bootloader with the ADB command. That is regular fast boot. On a post a few down, it is mentioned that the only thing they could think of is to make sure to flash and fastbootd. So which one are we supposed to use? Do we use the stock OOS recovery? The only way I know to flash the newest Android 11 is from the repo thread or flashable zips. I also tried it with the OTA update and the copy partition zip still didn't work from fastbootd and fastboot. Every time I do it I get an error that there is no boot image maybe I need to redownload the ROM?
Click to expand...
Click to collapse
idk, i just follow the intruction and its work perfectly on my device
after step 2 on normal fastboot device should be boot automatically to fastbootd for installing rom, just wait until finish
than follow next step, goodluck.
im using window and disable driver signature
dunno ¯\_(ツ)_/¯

jahidinbedod said:
idk, i just follow the intruction and its work perfectly on my device
after step 2 on normal fastboot device should be boot automatically to fastbootd for installing rom, just wait until finish
than follow next step, goodluck.
im using window and disable driver signature
dunno ¯\_(ツ)_/¯
Click to expand...
Click to collapse
I uninstalled my SDK tools and reinstalled them. redownloaded the Rom and started over and it finally worked! Very nice ROM

Paranoid Android Topaz Stable 1 - realme X50 Pro 5G

Reserved #1

Reserved #2

New build will come as soon as possible, main PA team told me to make the thread now.

We are live!
https://paranoidandroid.co/bladerunner

Yeah, just on time!

Cool stuff guys.
Have anyone tried it yet?

aleksandar.1 said:
Cool stuff guys.
Have anyone tried it yet?
Click to expand...
Click to collapse
Yep, everything works its muchhhh better than crappy realme ui
but make sure to be really on latest realme ui firmware

Hi,
I have a Chinese RMX2071 (Android 12) with recovery for Android 12 (v3.6.2_12). I tried to upload Paranoid Android but it shows a message that it is not for my model. Can I force install? Please help..

Any one tell how to flash the rom for 2 options for fastboot options or recovery options , how to install,any one tell me the proper installation step by step

Pasupathiraj0 said:
Any one tell how to flash the rom for 2 options for fastboot options or recovery options , how to install,any one tell me the proper installation step by step
Click to expand...
Click to collapse
I see you know each other. I am a beginner. Write which files and in what order to upload so that the phone accepts paranoid android. Thanks in advance.

I am very proud of this. thank you very much! I think that this is the only existing rom for this device (RMX2075) and it is amazing that someone is doing it because I think that Realme is leaving us alone

aleksandar.1 said:
Cool stuff guys.
Have anyone tried it yet?
Click to expand...
Click to collapse
Hi, thanks to developer for the first ROM on x50 pro, but ... I had installed on my rmx2075 and was very disappointed - very poor customization options, no always on display, and camera works with only one sensor, (better don't talk about camera app). After one day came back to stock (was not so ease...) .

dzenius said:
Hi, thanks to developer for the first ROM on x50 pro, but ... I had installed on my rmx2075 and was very disappointed - very poor customization options, no always on display, and camera works with only one sensor, (better don't talk about camera app). After one day came back to stock (was not so ease...) .
Click to expand...
Click to collapse
Do you use Telegram tutorial ?
Wipe all in TWRP, flash stock ROM, wipe data, dalvik, cache.
TheMalachite :Thanks for your work.
Unfortunately I've some issues :
- Fingerprint registered but not recognized, even after reboot, deleting, recreating).
- USB connection stop working (all parameters greyed out) > Solved by activating USB debugging
Sorry, I'ven't logcat configured...

Battosai94 said:
Do you use Telegram tutorial ?
Wipe all in TWRP, flash stock ROM, wipe data, dalvik, cache.
TheMalachite :Thanks for your work.
Unfortunately I've some issues :
- Fingerprint registered but not recognized, even after reboot, deleting, recreating).
- USB connection stop working (all parameters greyed out) > Solved by activating USB debugging
Sorry, I'ven't logcat configured...
Click to expand...
Click to collapse
after few not successful times flashing with official realme flash tool (https://www.xda-developers.com/real...ool-for-installing-coloros-realme-ui-updates/)
I use this flash tool. (Windows version give a positive virus alert, so must unable antivirus app and after revert pc to earlier restore point (just in case) )
SrCDA said:
A tool to flash .ofp files in bootloader mode without needing MSM Tool, an alternative to official realme tool.
THE DEVICE MUST HAVE THE BOOTLOADER UNLOCKEDFeatures
soft unbrick
install stock firmware
switch device region
Credits
italorecife
bkerler oppo_decrypt
All contributors
InstallationInstallLinux (in the example below I will use ubuntu)Install adb & fastboot and simg2img
Code:
sudo apt-get install android-tools-adb android-tools-fastboot simg2img
Install python >=3.8, git and other deps
Code:
sudo apt install python3 git python3-pip
Grab files
Code:
git clone https://github.com/italorecife/OppoRealme-OFP-Flash
cd OppoRealme-OFP-Flash
pip3 install -r requirements.txt
WindowsInstall the adb & fastboot drivers.
Install python + git
Install python 3.9 and git
WIN+R
Code:
cmd
Grab files and install
Code:
git clone https://github.com/italorecife/OppoRealme-OFP-Flash
cd OppoRealme-OFP-Flash
pip3 install -r requirements.txt
UsagePut the .ofp file in the same folder as the program, then put your device in mode fastboot to start flash.
Run:
Code:
python3 flash.py
if you have windows OS you can run normally by double clicking, and you have linux use terminal.
DOWNLOAD
Source Code
Click to expand...
Click to collapse

Thanks. Does it work in my case? What ofp should I download and try to flash? Global for rmx2071 or global for rmx2076? The phone is rmx2071 (china rom). As you can see in the images I uploaded, it asks for rmx2076L under twrp.

or paranoid?

it works great on my RMX2071 the only problem i have is play protect certification

Pasupathiraj0 said:
Any one tell how to flash the rom for 2 options for fastboot options or recovery options , how to install,any one tell me the proper installation step by step
Click to expand...
Click to collapse
If you going for recovery option make sure you have latest TWRP 3.7.0 i used this one https://www.pling.com/p/1945031/

Paranoid Android Topaz 3 - OnePlus 7

Thank you so much for this ROM. I want to try out this ROM. Do we have to be on OOS 12 or 11 before flashing this?

Barbiox Dogg said:
Thank you so much for this ROM. I want to try out this ROM. Do we have to be on OOS 12 or 11 before flashing this?
Click to expand...
Click to collapse
Device firmware is included now
Click to expand...
Click to collapse
ROM comes with firmware, you'll be able to flash it regardless of OOS version as long as your bootloader is unlocked.
Thank you for all the effort, Timo. It's all fine for now.

Halacoglu said:
ROM comes with firmware, you'll be able to flash it regardless of OOS version as long as your bootloader is unlocked.
Thank you for all the effort, Timo. It's all fine for now.
Click to expand...
Click to collapse
Ok great. I'm using Evolution X ROM which is based on OOS 12. Do I download the fastboot option then flash?
Does this ROM support Quick Unlock??

Barbiox Dogg said:
Does this ROM support Quick Unlock??
Click to expand...
Click to collapse
If that's unlocking as soon as the correct pin is entered, yes. Disabled on SIM pin however to prevent accidentally getting it blocked

Im on stock OOS12.1 locked , Whats the procedure to flash this custom rom?

unlocked the bootloader but couldn't fastboot flash it . getting FAILED (remote: (system_b) No such partition) issues, some one help

Where can we download fastboot version 33.0.3p2 for windows?

lolorider said:
Where can we download fastboot version 33.0.3p2 for windows?
Click to expand...
Click to collapse
You can get any 33.0.3 version platform tools, They work pretty fine.

Thanks for answer but I don't find any place to download an older version

amazing , thank you so much

lolorider said:
Thanks for answer but I don't find any place to download an older version
Click to expand...
Click to collapse
Modify download address
Change r34.0.0 to r33.0.3

Thanks

Great Job

tsaiajie said:
Modify download address
Change r34.0.0 to r33.0.3
Click to expand...
Click to collapse
What does it means?

Alexoxo said:
What does it means?
Click to expand...
Click to collapse
Hi there,it means that you search on google for 33 version.btw flashed Rom,really really god.installation went without any error.but i'm curious about pitch black theme.does paranoid have that implemented and possibility to hide pillow bar.good job

timo_capa said:
moderation has removed the device specific
Click to expand...
Click to collapse
Hi timo first of all thank you for this amazing rom i want to know about the nfc toggle tile i cant find it is this normal?

@timo_capa or if anyone can please kindly provide simple instructions on how to flash this custom ROM. Provide a simple guide on how to install it via Recovery option and Fastboot option.
I tried flashing it and I ended up softbricking my OnePlus 7 Pro. Please it is not everyone that is on Telegram so kindly provide installation instructions on the first post. Thank you

Open boot loader with
Code:
fastboot oem unlock
boot into fastboot mode
place rom file inside adb folder & run
Code:
fastboot update romname.image.zip
Make sure you download the .image.zip file
On first boot it will ask you to reset data, Reset your data & thats it

thanks for your hard work,,,
i flashed and used for one day,,,
battery timing was best, even better than oos10..
i faced some minor UI glitches,, as this is first built,, it's ok.. ROM id smooth.
charging speed is better than oos10..
the reason why i have to come back to oos10, was Snapchat chatting bug,,,
example if i send a msg , it will not show in settings and will send after hours.. some msgs even weren't send....
please fix Snapchat issue or if someone know how to solve Snapchat chat issue, please reply to this comment...
2nd it's showing device isn't certified, please solve it too.
Note: if anyone facing issue related fastboot option,, i mean if your device stuck on Bootloader warning,,, even after format data,,,, then please flash all partitions manually then then restart to recovery, format data then reboot to system... this is how i was able to boot ROM

Develop Bugs

welcome