Related
Disclaimer:
* You flash this ROM at your own risk and responsibility.
* This ROM is provided without ANY WARRANTY WHATSOEVER, not even the warranty that it works.
* None of the developers of this ROM will be held accountable for any damages, complaints or anything.
This rom is pre pre pre pre alpha, almost nothing is working! Just for everybody who want see Oreo look. I'm out of free time but I will update each time when I get some free time. Whats working, whats not working...etc? You tell me! You fix something, you tell me! You found something, you tell me! Adb somehow is not working, you need to change ro.build.type from userdebug to eng and adb will start working. If you have idea about whats going on with adb, you tell me! Somehow managed to boot this rom, a lot of work and time I spent to get Oreo boot, got also credentials working but somehow camera is fail to work, probably we must use Snap camera instead of the Camera2? You can try snap camera and tell me. You can try other cameras too and tell me!
Enjoy!
Source code && how to build:
https://forum.xda-developers.com/showpost.php?p=74724831&postcount=1008
Download:
https://mega.nz/#!ZB4ilbrL!nI_YV54IMBmKpA1BE4L9VYcwm3nsuLXAGKOu35NJdyQ
Can you post some screenshoots? Whats working? Whats not working? Etc? I'm so lazy
risk
while it is very risky to put this firmware.
munjeni said:
Can you post some screenshoots I'm so lazy Whats working? Whats not working? Etc?
Click to expand...
Click to collapse
Not a risky, just some more things is not working! Bugs need to be identified and fixed one by one.
Mobile data and camera are not working.
Viktor245 said:
Mobile data and camera are not working.
Click to expand...
Click to collapse
Wifi ok?
munjeni said:
Wifi ok?
Click to expand...
Click to collapse
Do not have the opportunity to check it out.
munjeni said:
Wifi ok?
Click to expand...
Click to collapse
Wifi can't be opened
Waoo, I changed my phone, now I can use my z1c to test all lol
In the afternoon I'm going to install it!
i will wait for working mobile data and wifi build
omkarmahananda said:
i will wait for working mobile data and wifi build
Click to expand...
Click to collapse
Me too I'm opened source code ppublic, everybody if free to use it and try fix something.
munjeni said:
Me too I'm opened source code ppublic, everybody if free to use it and try fix something.
Click to expand...
Click to collapse
actually i have no idea how this thing work.
but can you help learning ?!
any thread or any website or anything?
thank you
Did you have think include magisk for this version?
Sorry for being late:
Audio doesn't work
Wifi doesn't work
I'm not able to test cell data
Camera doesn't work, neither footej
ADB doesn't work, no usb at all, the device isn't listed neither with adb devices and devices control panel in windows
Bluetooth yes
Vibrating yes
@hackintosh5 here
Heyho. I just tested building from @munjeni 's sources. Unfortunately TWRP throwed an error 6. I checked the updater script and found some strange lines. With them removed I was able to install and boot
I'm really up for doing some fixes, but for me it's learning by doing which can be a time intensive process.
BTW: USB transfer works by disabling ADB in developer options... I just copied the screenshots off the device.
115ek said:
Heyho. I just tested building from @munjeni 's sources. Unfortunately TWRP throwed an error 6. I checked the updater script and found some strange lines. With them removed I was able to install and boot
I'm really up for doing some fixes, but for me it's learning by doing which can be a time intensive process.
BTW: USB transfer works by disabling ADB in developer options... I just copied the screenshots off the device.
Click to expand...
Click to collapse
But ADB works to you? Can you see the phone if you do adb devices?
@munjeni can I try to replace the libs just like as porting a custom rom from the N builds? Or it is wasted time?
-totonio- said:
But ADB works to you? Can you see the phone if you do adb devices?
Click to expand...
Click to collapse
Yes, adb works. But only if you revert this commit https://github.com/munjeni/android_device_sony_amami/commit/e0cde4386d51ad2b45d7700f495a85fdb75dc8d2.
Adb from the 8.0 tree seems to be broken, but maybe it's a problem with our devicetree.
Nevertheles, as Munjeni already did, replacing the adbd with a prebuilt one (I used one from an Android 7 tree i had lying around) works quite fine.
@munjeni : Is adb built from 8.0 source working for you? Or is it a permission problem?
Hey. I've got some news. Wifi was working for me. I just installed a new build and was able to connect
I can't test data connection - the sim reader is broken in my test device.
I think we should move ahead to lineage 15.1 (android 8.1) because support for lineage 15.0 was already dropped.
Unfortunately there are several build issues - let's see what the time brings.
*Edit: adb is fixed now
Booted 15.1 some minutes ago.
Working
adb
MTP
brightness slider
not working
wifi
automatic brightness
audio
camera
LEDs
everything else...
DELETE
DELETE
Reserved
For Indian Users +8.1 AOSP Users
If Jio 4g voice is offline Turn on Location and it will work
P.s Turn on location in Battery saver mode it will not consume more battery then.
Regards~
Great, I'll check this in few days Before this i have questions
Magisk works on this rom?
Can i return to nougat roms?
bohdankrulik said:
Great, I'll check this in few days Before this i have questions
Magisk works on this rom?
Can i return to nougat roms?
Click to expand...
Click to collapse
magisk is not working ? for now
---------- Post added at 01:49 AM ---------- Previous post was at 01:07 AM ----------
Treble Support Included
You can now flash any GSI Image on This TWRP
detailed Instructions on it will be added later ?
Regards~
Proximity sensor does not work
Earpiece volume is too low. Having trouble listening to calls.
And yes safetynet passes. I am able to use Google Tez and Snapchat.
mthepa said:
Proximity sensor does not work
Click to expand...
Click to collapse
it works just need to be calibrated
After installing this TWRP oreo, the screen does not work
I know you understand how important is to upload a source code of your rom. Because all your work based on a source code from other contributors of MTK community that they provided for everyone. Your rom can even has my code (just because one of the people you mentioned used it). So I think it is important to share the code with the community. It will helps to fix bugs and create new roms in the future. And it will be fair for all people have been making roms before you. Also some people (like me) want to make enchancements to original code from Android vendors but it will be impossible without source. I hope you understand my position and will make needed acions once you will be ready to show it for the public.
stanislavskiy said:
I know you understand how important is to upload a source code of your rom. Because all your work based on a source code from other contributors of MTK community that they provided for everyone. Your rom can even has my code (just because one of the people you mentioned used it). So I think it is important to share the code with the community. It will helps to fix bugs and create new roms in the future. And it will be fair for all people have been making roms before you. Also some people (like me) want to make enchancements to original code from Android vendors but it will be impossible without source. I hope you understand my position and will make needed acions once you will be ready to show it for the public.
Click to expand...
Click to collapse
there are some personal reasons for not opening device tree and vendors please understand also treble support is there so
any GSI image will bootup without issue so ahead from this I don't think no more roms needed also kernel sources are already there.
Regards~
murtaza1326 said:
there are some personal reasons for not opening device tree and vendors please understand also treble support is there so
any GSI image will bootup without issue so ahead from this I don't think no more roms needed also kernel sources are already there.
Regards~
Click to expand...
Click to collapse
My message was for Dinolek
And Treble support is good but not enough if you want to build a rom for yourself because Dinolek made changes for core system libraries/frameworks. And kernel is not a problem at all. The problem was to make everything working on system-level and Dinolek did it. That's awesome.
stanislavskiy said:
My message was for Dinolek
And Treble support is good but not enough if you want to build a rom for yourself because Dinolek made changes for core system libraries/frameworks. And kernel is not a problem at all. The problem was to make everything working on system-level and Dinolek did it. That's awesome.
Click to expand...
Click to collapse
i replied on his behalf only he have exams i was also there when he was bringing up this project now i openly say why sources are hidden you know lunik he charges money for developing roms also he didn't provided credits to patches owner dinolek did it for us i know other developers also want this but if all sources goes out i am damn sure lunik will copy his work and earn money from it so sources are not open tho kernel sources with modifications are out you can bringup with that kernel
stanislavskiy said:
I know you understand how important is to upload a source code of your rom. Because all your work based on a source code from other contributors of MTK community that they provided for everyone. Your rom can even has my code (just because one of the people you mentioned used it). So I think it is important to share the code with the community. It will helps to fix bugs and create new roms in the future. And it will be fair for all people have been making roms before you. Also some people (like me) want to make enchancements to original code from Android vendors but it will be impossible without source. I hope you understand my position and will make needed acions once you will be ready to show it for the public.
Click to expand...
Click to collapse
Source will be uploaded when rom get to beta stage.
I'm not using clear aosp sources, I based on Mediatek alps 8.1 source code, that's why it's hard to share it in proper way.
Nothing is based on work from other contributors, except maintained ones.
Stuck at boot animation
Test results
So i have tested this rom in my phone fr 2 days & i gt a result ...
What doesn't work
_________________
1)No navigation bar(no option to switch)
2)It doesn't restart (only power offs if u click on restart)
3)Power button doesn't work when u want to switch on the device
4)Proximity sensor error
5)gyroscope sensor error
6)Apps booting time is very slow
7)low ear-peace & speaker vol
8)Magisk error(if u flash magisk it stucks in boot-loop)
9)Physical home & back button doesn't work
10)Headphone sound output is bad
11)It takes more time to install an app
12)Camera is avg
13)2nd time if ur flashing this os it just says No OS INSTALLED while booting the device.
14)Call quality is not that much gud (avg)
What works fine
______________
1)OS booting & installing time is very fast
2)Battery management is very good
3)Ram management is very good
4)Wifi, hotspot, celular data, bluetooth tethering, USB tethering works fluently
5)location is very accurate
6)some of the basic sensors works
7)Touch works very well
8)very less heating issues
This are the results i gt in the testing of this rom in my device thanks to the developer nd all the persons who are been works on this
Cheers SAM.J
SAM.J said:
So i have tested this rom in my phone fr 2 days & i gt a result ...
What doesn't work
_________________
1)No navigation bar(no option to switch)
2)It doesn't restart (only power offs if u click on restart)
3)Power button doesn't work when u want to switch on the device
4)Proximity sensor error
5)gyroscope sensor error
6)Apps booting time is very slow
7)low ear-peace & speaker vol
8)Magisk error(if u flash magisk it stucks in boot-loop)
9)Physical home & back button doesn't work
10)Headphone sound output is bad
11)It takes more time to install an app
12)Camera is avg
13)2nd time if ur flashing this os it just says No OS INSTALLED while booting the device.
14)Call quality is not that much gud (avg)
What works fine
______________
1)OS booting & installing time is very fast
2)Battery management is very good
3)Ram management is very good
4)Wifi, hotspot, celular data, bluetooth tethering, USB tethering works fluently
5)location is very accurate
6)some of the basic sensors works
7)Touch works very well
8)very less heating issues
This are the results i gt in the testing of this rom in my device thanks to the developer nd all the persons who are been works on this
Cheers SAM.J
Click to expand...
Click to collapse
Thanks for feedback.
About 2 and 3, install latest 6.2.0.0G from flyme site, not twrp one.
For 4 flash the fix from rom download link fix_alsps_mblu2_oreo.zip, it will be included in next update.
About 5, we don't have gyroscope, on other firmwares it is emulated from magnetometer.
What do you mean in 9?
To disable hardware keys and enable software flash zip from faq.
SAM.J said:
So i have tested this rom in my phone fr 2 days & i gt a result ...
What doesn't work
_________________
1)No navigation bar(no option to switch)
2)It doesn't restart (only power offs if u click on restart)
3)Power button doesn't work when u want to switch on the device
4)Proximity sensor error
5)gyroscope sensor error
6)Apps booting time is very slow
7)low ear-peace & speaker vol
8)Magisk error(if u flash magisk it stucks in boot-loop)
9)Physical home & back button doesn't work
10)Headphone sound output is bad
11)It takes more time to install an app
12)Camera is avg
13)2nd time if ur flashing this os it just says No OS INSTALLED while booting the device.
14)Call quality is not that much gud (avg)
What works fine
______________
1)OS booting & installing time is very fast
2)Battery management is very good
3)Ram management is very good
4)Wifi, hotspot, celular data, bluetooth tethering, USB tethering works fluently
5)location is very accurate
6)some of the basic sensors works
7)Touch works very well
8)very less heating issues
This are the results i gt in the testing of this rom in my device thanks to the developer nd all the persons who are been works on this
Cheers SAM.J
Click to expand...
Click to collapse
2nd,3rd and 9th option from not working are working fine on my device.
Thank you very much for the firmware!
[Kernel][Oreo/Nougat] StockPatched
Work's on Nougat and JUI
Fetature:
- Oreo support
- Cpuqiet
- Working magisk
- IR Work on device where IR not work on JUI
- GPU overclocked to 625 mHz
Download (Install only on JUI, LOS)
https://drive.google.com/file/d/1RkugRW3i-64sZnkNW7Jb5pz_2aNQh9QN/view
Donate:
1529yLvkmQHqhtgcDkYyZ7VgYxHnUyxefj
BitCoin
nice one there dude.
when we all beleive these isnt a light at the end of the tunnel for this phone, you make one. thanks for the kernel, i was able to boot dotos base on oreo on cool1 with your kernel.
I will make Los 15.1 as soon as possible
that's nice.
i wait for Oreo LOS.
SimbyOS said:
I will make Los 15.1 as soon as possible
Click to expand...
Click to collapse
Thank you
I installed this on los 14.1 but if you flash kernel then magisk, get ramdisk error (wifi,Bluetooth, etc), so flash magisk first then kernel and all working
cmiiw
A stable Miui 10 with everything working like stock cam,IR could be worth giving a shot as a daily driver..
JUI 8.0
Is this kernel working on JUI 8.0?
Hi,
Thanks for the work.
Do your other ROMs already have this kernel?Or should I flash this again?
cool1 and also Dotos?
Fixes IR Blaster, Disables WiFi
Hi. I tried installing this on JUI hoping it would fix IR issues. It did, but now my WiFi is not working. Any work around for this?
Btw, thanks for this.
Installed this on JUI Mod Cool Play 6. Fixed my Magisk but Wifi and Wifi Tethering is broken.
@SimbyOS Please tell me how to fix the broken wifi issue with this kernel...The kernel working seamlessly on machmotofan coolplay6 firmware for cool1...IR blaster and auto-brightness working fine.. if the wifi works I can use the jui as daily driver..Help! Please!
vulturext said:
Installed this on JUI Mod Cool Play 6. Fixed my Magisk but Wifi and Wifi Tethering is broken.
Click to expand...
Click to collapse
Hey dude have u found the fix for IR for cool play 6 rom...i think coolplay 6 jui roms are best if we get to work the ir..
Hi all,
I tried to find anything in regards of using lineageos with the Gigaset GS290, but unfortunately I was not able to find any note.
Do anybody knows if there is a possibility to install lineageOS on that device?
btw. I used also the google search but there was also no result.
Many thanks in advance for any hint.
BR
Martin
McT73 said:
Hi all,
I tried to find anything in regards of using lineageos with the Gigaset GS290, but unfortunately I was not able to find any note.
Do anybody knows if there is a possibility to install lineageOS on that device?
btw. I used also the google search but there was also no result.
Many thanks in advance for any hint.
BR
Martin
Click to expand...
Click to collapse
Nothing.
McT73 said:
Hi all,
I tried to find anything in regards of using lineageos with the Gigaset GS290, but unfortunately I was not able to find any note.
Do anybody knows if there is a possibility to install lineageOS on that device?
btw. I used also the google search but there was also no result.
Many thanks in advance for any hint.
BR
Martin
Click to expand...
Click to collapse
https://mastodon.social/@gael/104914516447228584
/e/OS has been ported to the GS290 by /e/ and Gigaset, they just announced it:
/e/ announces the /e/-GS290 as the latest device available with privacy friendly /e/OS pre-installed - e Foundation - deGoogled unGoogled smartphone operating systems and online services - your data is your data
/e/ announces the /e/-GS290 as the latest device available with privacy friendly /e/OS pre-installed December 17th 2020 - /e/OS, the privacy by design operating system is pleased to announce that the best-selling GS290 by Gigaset, the major European electronics company that produces smartphones...
e.foundation
They also sell it as /e/-GS290, already flashed: https://esolutions.shop/shop/e-os-gs290/
https://build.lolinet.com/file/lineage/GS290/
I decided to add some info:
- It automagically installs the latest Firmware.
- This has working VoLTE and stuff.
- This is an clean device tree (the /e/ one is hacked together based on Volla's Ubuntu Touch device tree)
- This has been developed by the a bit famous Erfan Abdi (erfanoabdi).
Deleted
nift4 said:
https://build.lolinet.com/file/lineage/GS290/
I decided to add some info:
- It automagically installs the latest Firmware.
- This has working VoLTE and stuff.
- This is an clean device tree (the /e/ one is hacked together based on Volla's Ubuntu Touch device tree)
- This has been developed by the a bit famous Erfan Abdi (erfanoabdi).
Click to expand...
Click to collapse
@nift4, I'm very impressed with your ROM lineage-17.1-20210318-EXPERIMENTAL-GS290. At first glance, it runs like clockwork. I can't tell you the details yet. Please continue. I would be happy to donate a coffee or more...
iodemos said:
@nift4, I'm very impressed with your ROM lineage-17.1-20210318-EXPERIMENTAL-GS290. At first glance, it runs like clockwork. I can't tell you the details yet. Please continue. I would be happy to donate a coffee or more...
Click to expand...
Click to collapse
Actually, it's not by me, but by @erfanoabdi. I wrote that in the post tho.
@erfanoabdi
I flashed the latest 17.1 rom but without flashing the firmware (mine was newer, had the february 2021 update installed before switching to your rom). Now the compass does not work, would it work if I would downgrade the firmware to what is included in the zip?
Second problem:
Recovery reboots when inserting an USB cable and connecting it to a linux pc. Had to flash though /e/ recovery then switch to the lineage recovery and refrain from inserting the USB cable.
Any ideas?
My Gs290 works now with the latest 18.1 rom. really happy this is made possible! thanks sir. Erfanoabdi ! i'll buy you a coffee too!
i did notice outgoing calls are not possible no sound and hang up after 8 seconds , receiver has no sound neither.
incomming calls work fine . putting phone on speaker does not work , still on earspeaker.
i did mannage to ring a person on 3G but no ringing and no sound afterwards.
strangely a helpdeskline of a company (fixed line ) did work
don't know if i would need to flash to 17.1 rom to have calling fully possible???
areshinakya said:
@erfanoabdi
I flashed the latest 17.1 rom but without flashing the firmware (mine was newer, had the february 2021 update installed before switching to your rom). Now the compass does not work, would it work if I would downgrade the firmware to what is included in the zip?
Second problem:
Recovery reboots when inserting an USB cable and connecting it to a linux pc. Had to flash though /e/ recovery then switch to the lineage recovery and refrain from inserting the USB cable.
Any ideas?
Click to expand...
Click to collapse
I did need twrp gs290 recovery for succesful completion , other wise it looped in to "smartphone in orange state. and when connecting the smartphone in fastboot to the pc it would reboot in orange state....
also need the right driver for the gigaset GS920 chip https://www.getdroidtips.com/install-mediatek-mt65xx-usb-vcom-drivers/
(don't know if it's trustworthy) and update it with driver booster 8 (easy )
(In win10 you need to restart in advanced startupsettings and push "7" disable drive signing enforcement before doing so)
Or update "android device " in device manager with the driver.
areshinakya said:
@erfanoabdi
I flashed the latest 17.1 rom but without flashing the firmware (mine was newer, had the february 2021 update installed before switching to your rom). Now the compass does not work, would it work if I would downgrade the firmware to what is included in the zip?
Second problem:
Recovery reboots when inserting an USB cable and connecting it to a linux pc. Had to flash though /e/ recovery then switch to the lineage recovery and refrain from inserting the USB cable.
Any ideas?
Click to expand...
Click to collapse
1- yep that should work
2- known bug and will be fixed sooner or later
FlashedMeself said:
My Gs290 works now with the latest 18.1 rom. really happy this is made possible! thanks sir. Erfanoabdi ! i'll buy you a coffee too!
i did notice outgoing calls are not possible no sound and hang up after 8 seconds , receiver has no sound neither.
incomming calls work fine . putting phone on speaker does not work , still on earspeaker.
i did mannage to ring a person on 3G but no ringing and no sound afterwards.
strangely a helpdeskline of a company (fixed line ) did work
don't know if i would need to flash to 17.1 rom to have calling fully possible???
Click to expand...
Click to collapse
Does this still happen?
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This firmware was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
6. Uncheck Update Lineage Recovery alongside the OS option during start wizard
Work
almost all
Known Issues
Links
3. 20210509: may security patch: https://drive.google.com/file/d/1xzUPsV8cYLR9OyseUe294VNJfcCffpF9/view?usp=sharing
2. 20210430: april security patch: https://drive.google.com/file/d/1gTDS_1wgnJ9KfIw--CzljLgZ8ahxAR9v/view?usp=sharing
1. 20201224: initial technical build: https://drive.google.com/file/d/19tzaR1YE001awwqThNAn48IXsk6FOobm/view?usp=sharing
Gapps
opengapps: https://sourceforge.net/projects/opengapps/files/arm/test/20210130/
BiTGApps: https://forum.xda-developers.com/t/custom-gapps-bitgapps-for-android.4012165/
P.s. for BiTGApps: Chrome workaround with gapps: Chrome should be a part of system app in Android R (11) but we install it as user app, which break sign-in and sync in chrome. To fix this, allow contacts permission for chrome. Restart chrome and you can add your google account.
Root
Install latest magisk (21.1+) from canary channel: https://github.com/topjohnwu/Magisk/releases/tag/v21.1
Recovery
Use official 3.0.2-0 version from: https://twrp.me/samsung/samsunggalaxynotepro122qcom.html
or use my twrp version: https://forum.xda-developers.com/galaxy-note-pro-12/development/recovery-twrp-3-1-1-0-t3684802
Sources
Sources: https://github.com/lineageos
Device: https://github.com/Valera1978/android_device_samsung_viennalte
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8974
Vendor: https://github.com/Valera1978/android_vendor_samsung_viennalte
Thanks
Thanks to LineageOS team
Nice
Will there be also a P900 build?
Thank you Valera 1978!
PS. I have "Serial console enabled Performance is impacted. To disable, check bootloader" message.
Today I saw that BT is not working at all
BT is already crashed in the last 17 Version from 2020/12 several times. Maybe a common issue?
A build for the P900 would be great! Many thanks to the developers for keeping this get tablet alive and better than ever!
Valera1978, gratitude for keeping our Tablet alive. How is the S-Pen working in this ROM?
Well, I think to try tomorrow to install it! Good work like always Dev
What would I necessarily have to do to Port this to p900
I tried this for a little time. For me it is laggy too much. It's better at the moment Lineage 17.1 even if I need to find the version with palm rejection working because in the last (for me) not work.
I tried this rev. but I immediatly rolled back to 17.1
So buggy and slow. I hope in next updates
finessefigure said:
What would I necessarily have to do to Port this to p900
Click to expand...
Click to collapse
Any progress?
Hi! I flashed the new version and this is perfect, not slow like the other!
I would want use Duo app but from the other side not hear me. If I do a simple video with camera app I can hear my voice. What problem can be???
Thanks a lot
Edit: I found this problem in lineage 17.1 too. Maybe there is some settings that I don't know?!
Edit2: If u want call via skype, duo or other things just use earphones... what a bug lol!
Tanks a lot Valera1978 for the New Update...
No possibility with p900?
New build's great, much smoother than 17.1 and no crashes or other issues so far
Edit: Found out that the lag is somehow caused by me changing the wallpaper. Not sure why since the wallpaper is not live and is only 1920x1200 so it shouldn't cause lag.
Also, system UI keeps stopping when trying to enter settings from the notification shade
Too bad can't download it (neither of them). There seems to be some kind of cooldown or something on Drive. Can anyone confirm?
Edit: Got it installed. Seems to be super smooth. Thank you very much for your work OP. You are da real MVP, this tabled is old but you keep this alive!
its not better compare to 17.1 . change colorful wallpapers in few programs/home unable to change. some graphics issue. video still same as 17.1 camera can not take video .but can take pictures. Thanks Valera1978 for the new upgrade
Updated April security patch. runs smooth, but still everything same camera only can use for photo and few apk graphic could not see. but over all it stable and nice thanks again Valera1978
updated May security patch. unfortunately can not boot. keep goes to recovery mode .do any one can help me what to do to boot as regular system.did any one face same problem