I connected my OTG cable to the xbox 360 controller and plug the other end of the OTG cable to my Nexus 7. Most buttons like the left stick, buttons work, however I can't get the D-Pad work.
How do I make the D-Pad work?
redjersey said:
I connected my OTG cable to the xbox 360 controller and plug the other end of the OTG cable to my Nexus 7. Most buttons like the left stick, buttons work, however I can't get the D-Pad work.
How do I make the D-Pad work?
Click to expand...
Click to collapse
I too have been wondering this as I love using my xbox controller on my nexus 7 but emulation leaves a bit to be desired if I can't use the d-pad to play old console games...
Depending on what game you play you go to controller in settings where you will see a list of actions. You tap on an action like for instance to fire a wepon then you tap the button on your controller to program it to fire when you hit it. Most first person shooters have that option. Sixaxis with a ps3 controller is what I do. Gameloft games work well with sixaxis but madfinger can be a little tricky to set up.
Keymapper
Use Tincore Keymapper to remap every button you wanted on any game or application you like. Works like charm for me.
:laugh:
I have tried many build of Retroarch and could not get the XBOX360 controller to work. I have read many posts people got this to work but I cannot replicate this.
The controler works ok outside in the menu and allow me to select the game. Once the game starts, I could only use Start button which brings up the RGUI and Back button which goes back to the Retroarch menu.
Anyone can give me any tips?
Also I am using the XBOX wireless dongle. If I leave this plug in, the Amazon Fire TV will start in Safe Mode. No idea
In the Retroarch input settings, if you disable auto detect you can scroll way down and enter custom mappings into controller 1. The left joystick was detected as dpad but only the dpad works for me in game.
I'm just going to copy and paste the post I just made and what I did to fix it.
I have tired the controller with Sev Zero and Deus Ex. I have also tried an Xbox 360 controller. They work in the Fire TV menu, but not in any of the games. Does anyone have any idea what is going on? The only thing I can think of is that somehow the buttons got mapped funky when I mapped them for XBMC using FireTV Side App Installer.
I figured it out. For some reason the Xbox 360 Dongle was causing the problem. I still had it plugged into the USB port. Once I removed that and restarted, everything seemed to work with the fire TV game controller.
Hey guys,
I just pre-ordered an Amazon Fire TV here in Germany and I have a specific question for which I didn't find an answer yet. Everybody is saying that the AFTV has basic CEC functionality. I just wanted to know what this means in detail? Which keys are working and which are not? I heard that the arrow keys and the OK/select key are working. But what about the back, the home and the multimedia buttons (play/pause etc.)? I would be very glad if someone could answer this question (espacially with a Sony Bravia TV).
Thanks in advance. I'm looking forward for an answer.
elmurato said:
Hey guys,
I just pre-ordered an Amazon Fire TV here in Germany and I have a specific question for which I didn't find an answer yet. Everybody is saying that the AFTV has basic CEC functionality. I just wanted to know what this means in detail? Which keys are working and which are not? I heard that the arrow keys and the OK/select key are working. But what about the back, the home and the multimedia buttons (play/pause etc.)? I would be very glad if someone could answer this question (espacially with a Sony Bravia TV).
Thanks in advance. I'm looking forward for an answer.
Click to expand...
Click to collapse
I would like to know that too. I have a Samsung tv and the only cec function I can see fire tv performing is when I wake the device up from sleep it automatically shifts my tv from cable to fire tv screen and turns on the sound system if its off. But nothing on the TV remote works.
Sc0rp10 said:
I would like to know that too. I have a Samsung tv and the only cec function I can see fire tv performing is when I wake the device up from sleep it automatically shifts my tv from cable to fire tv screen and turns on the sound system if its off. But nothing on the TV remote works.
Click to expand...
Click to collapse
On my toshia the arrows and select were working. But there was no back or home.
Sony here, no back/home... seems the best u can have until a hack.
c0mm0n said:
Sony here, no back/home... seems the best u can have until a hack.
Click to expand...
Click to collapse
Damn. So for now its unusable via CEC, right? Without a back button it's not possible to exit menus... Could you try the media buttons too, please? I mean play/pause/stop. Thanks!
elmurato said:
Damn. So for now its unusable via CEC, right? Without a back button it's not possible to exit menus... Could you try the media buttons too, please? I mean play/pause/stop. Thanks!
Click to expand...
Click to collapse
I'm pretty sure play/pause worked for me. But I just got a FLIRC. Much better and more flexible.
Not working for me. Panasonic TV.
with pi it works perfectly...
actually the TV DO recognize there's a hdmi CEC supported device but none of the buttons do something
Tested on Sanyo TV designed for use with roku.
Directions and media buttons work.
Back works (but brings up roku qr overlay)
the Exit button also functions as Back.
Hey,
My FireTV is connected to my Onkyo TX-NR626 amp and from there to my LG TV, I can control the FireTV with the remote of the Onkyo and everything is working, select, back, directions, play, pause, and skip
But you have to enter a code for a RIHD (CEC) enabled device on the remote, the code is 31612 if I'am not wrong
The only thing that is not working is you can't wake up the FireTV out of the standby
Gesendet von meinem HTC One_M8 mit Tapatalk
Sony Bravia Sync
Tested on an old KDL55-W4000!
Sony calls its CEC compatibility "Bravia Sync". With "Bravia Sync" activated, the following commands work via my TV's remote: Play, Stop, Back-Button, Forward, Rewind, Direction-Keys and Enter ...
With the Sony-Command "Sync Menu", the TV checks for connected devices at HDMI ports and even activates the FireTV from sleep-mode ... If the FireTV is activated, the same button "Sync Menu" opens the Options in FireTV (e.g. skipping to next episode or language selection)
Unfortunately, the only button not yet found by now via CEC, is the "HOME" button. By that button missing, you might get stucked, e. g. in the youtube app for FireTV, because the Back-Button does not go back to main menu of FireTV but stays in the YouTube-App and shows the Search-Site ...
If anyone has a Sony-TV, sending a "HOME"-command via CEC, please contact me, so I can properly set up my Harmony to send the command on my Sony-TV, too (sometimes, not all commands the tv is capable of, are buttons on the remote ... let's give it a try).
Hope, that has helped someone ... Please get back to me, if "Home" is available. Otherwise, I will not use YouTube-App
I don't know anything about CEC on other platforms. I just got a Fire TV two days ago.
I was very happily surprised when my TV's remote (Sony Bravia 47") worked on the Fire. My Girlfriend grabbed the TV remote as we were setting the fire up, and many of the commands were mapped to Sony remote buttons. Since I had cloned the remote to my Universal Remote URC20, it also works. I can create macros and treat the Fire TV like it has an IR remote. Very handy functionality.
All I have done is navigation, backward, forward, select, etc. Of course, you need the Fire remote for voice control.
Someone in another thread said that Samsung TVs didn't run commands back through HDMI. So, obviously ot depends on TV manufacturer.
On my LG TV, CEC is not working. In fact when Fire TV is connected CEC is not working for any device connected to the TV.
I had no problem with a rasberry PI used before I got the Fire TV.
Sc0rp10 said:
I would like to know that too. I have a Samsung tv and the only cec function I can see fire tv performing is when I wake the device up from sleep it automatically shifts my tv from cable to fire tv screen and turns on the sound system if its off. But nothing on the TV remote works.
Click to expand...
Click to collapse
I also have a Samsung, I found out that Play/Pause and FF/REW are the only one's that works. lol pretty disappointing.
Latest TV firmware UE55D8000/5 v2 (there are later firmwares on the web than ota updates for some odd reason).
Latest Preerooted firmware on aFTV.
papars said:
On my LG TV, CEC is not working. In fact when Fire TV is connected CEC is not working for any device connected to the TV.
I had no problem with a rasberry PI used before I got the Fire TV.
Click to expand...
Click to collapse
Hmm. What year is the TV? My 2013 LG remote has no problem with the Fire TV.
Cec is a pita for me and my lg 55ub8500, it works fine if you have the TV on and then power the firetv on.. But if you have the firetv on and power on the TV.. It's a no go until you restart the ftv. Would be ok I'd the ftv would turn off but mine stays on like 24/7.
If your lg TV is new (2014) turn on simplink in the menus and setup your hdmi port to be a denon Avr(or any device that supports cec, not all do) and it should work
whazup2015 said:
Tested on an old KDL55-W4000!
Sony calls its CEC compatibility "Bravia Sync". With "Bravia Sync" activated, the following commands work via my TV's remote: Play, Stop, Back-Button, Forward, Rewind, Direction-Keys and Enter ...
With the Sony-Command "Sync Menu", the TV checks for connected devices at HDMI ports and even activates the FireTV from sleep-mode ... If the FireTV is activated, the same button "Sync Menu" opens the Options in FireTV (e.g. skipping to next episode or language selection)
Unfortunately, the only button not yet found by now via CEC, is the "HOME" button. By that button missing, you might get stucked, e. g. in the youtube app for FireTV, because the Back-Button does not go back to main menu of FireTV but stays in the YouTube-App and shows the Search-Site ...
If anyone has a Sony-TV, sending a "HOME"-command via CEC, please contact me, so I can properly set up my Harmony to send the command on my Sony-TV, too (sometimes, not all commands the tv is capable of, are buttons on the remote ... let's give it a try).
Hope, that has helped someone ... Please get back to me, if "Home" is available. Otherwise, I will not use YouTube-App
Click to expand...
Click to collapse
Same on my 2013 Sony TV, the remote's HOME button functions as Android's MENU button, whilst the remote's OPTIONS button does nothing. Shame, so close to being perfect. Still hoping the Fire TV will get a working root and that we can change the HDMI-CEC options that way.
I just bought a Noname 40" TV (Hisense LTDN40D36SEU) and was really surprised that it supports CEC quite well!
Nav, OK, Play, Pause, < Skip > and even Stop (! Not even on the Fire TV Remote itself) are working perfectly.
Just hoping to find a way to get Home and Context working. As theres a way to go to a Developer-Page on the TV, even with dumping firmware Option, im optimistic to get it fixed one day. Or, even better as Spence1115 said, hopefully Someday Root on the FireTV and a way to change it over here.
i had conflict on my samsung smart tv 2014 when connecting the AFTV it also played havoc with my receiver so i have decided to use a cec less adaptor and it worked a treat just in case anyone wanted to know and if they get conflicts (mine was connecting and disconnecting all my devices randomly)
Hi.
I just got a LG 42lb5600 and I can't even see the simplink option.
No buttons work on the fire.
Is there a firmware update or something I can do?
I hope that one day we will get the ability to program certain key presses through CEC on the Fire TV. Works great with sideloaded Kodi on my fireTV Stick but sadly no context or home functionality.
So to my surprise, my regular sony tv remote (IR) is able to control my AFTV out of the box. i originally thought i would need to buy a USB IR blaster for this. However, my guess is the Bravia sync is playing the part here. I seem to be able to replicate most things (directional pad, select, return) but don't think i have a button on here that can do the Home button or the Contextual (Hamburger menu) button.
Is there a way to configure this somehow?
barrist said:
So to my surprise, my regular sony tv remote (IR) is able to control my AFTV out of the box. i originally thought i would need to buy a USB IR blaster for this. However, my guess is the Bravia sync is playing the part here. I seem to be able to replicate most things (directional pad, select, return) but don't think i have a button on here that can do the Home button or the Contextual (Hamburger menu) button.
Is there a way to configure this somehow?
Click to expand...
Click to collapse
Hi,
I have a Bravia also and my Sony remote controls the Fire TV. You're correct that the Bravia Sync (CEC) is doing the job.
On my Sony remote the blue "Home" button works as the Context (hamburger) button, at least in XBMC it does.
I can't find a button that replicates the Fire TV "Home" button though, and I don't believe there's an way to configure this.
Does yours work ok all of the time? For me, after a while the FireTV seems to break all my CEC communication, so my TV stops controlling my audio system and doesn't see any connected devices, only pulling the power from the FireTV will fix this, but then after a while (sometimes hours, sometimes a couple of days) it breaks again.
It's using the HDMI cable/slot that my WDTV Live SMP was using and that never had a problem so I don't think it's the HDMI cable at fault.
helicon9 said:
Hi,
I have a Bravia also and my Sony remote controls the Fire TV. You're correct that the Bravia Sync (CEC) is doing the job.
On my Sony remote the blue "Home" button works as the Context (hamburger) button, at least in XBMC it does.
I can't find a button that replicates the Fire TV "Home" button though, and I don't believe there's an way to configure this.
Does yours work ok all of the time? For me, after a while the FireTV seems to break all my CEC communication, so my TV stops controlling my audio system and doesn't see any connected devices, only pulling the power from the FireTV will fix this, but then after a while (sometimes hours, sometimes a couple of days) it breaks again.
It's using the HDMI cable/slot that my WDTV Live SMP was using and that never had a problem so I don't think it's the HDMI cable at fault.
Click to expand...
Click to collapse
Yeah i figured out that i needed to change some settings to allow the remote to replicate the "hamburger" button.
I find it a bit laggy (understandable) compared to the amazon remote, and the lack of a Home button makes me think I'll eventually just use two remotes, sacrificing a bit of convenience that way. I haven't had the issue you've had yet though; i've only had it a few days though. My setup is pretty simple though, just my tv hooked up to the AFTV.
Is it really possible to connect ps4 controller to amazon fire tv..I've seen video on YouTube someone did that by pressing share and home bottoms same time then its worked..i tried that along with everything and it always failed to connect..it's keep saying my controller is not in range while I'm only 4 to 5 feet away..can someone help on how to please
would be appropriate
Theres supposedly differnt revisions of the DS4 that behave slightly differnt then others ... its been said launch controllers wont connect .. what revision that is
The controller I have is practically useless the input lag increases the more i use it *distance doesnt matter* and it will get unusable very quick with over a minute lag.
I suggest getting a differnt controller.
.
Thanks for reply
I use my PS4 controller with my Amazon Fire TV all the time,it's the best controller for Amazon Fire TV IMO.never had any issues.
Pairing it very easy,but can be a little confusing as it's a 2 step task.
First you need to go to controller pairing setting on AFT and search for new controller,meanwhile you must turn of the PS4 controller and hold share and power button at the same time,you will notice the PS4 controller will start flashing.
here is the tricky part,on your TV you will see a unknown controller (or something similar) becomes available,now you must click on that and press Share+power again on the PS4.
After that it will be paired and you will get a message confirming that.
Alsomake sure you unplug the PS4 console itself if you have one,because otherwise the controller will turn the PS4 on and conflics with pairing process with AFT.
I use a seperate PS4 controller with AFT.