Magisk boot.img Rog Phone II update WW-17.0240.2007.27 Android 10 - ASUS ROG Phone II Guides, News, & Discussion

Hello,
Boot.img for Rog Phone II patched with Magisk 7.5.1:
update WW-17.0240.2007.27
Patched
Stock boot.img
update WW-17.0230.2004.60
Patched
Stock boot.img
update WW-17.0210.2001.60.
Patched Mirror 1
Patched Mirror 2
Stock boot.img
If you need other version boot.img patched with Magisk just comment or msg me.

Very very thanks
I need it

thank you!

Stuck on bootloop while updating to Android 10
How did you update your phone while keeping magisk? I tried updating via OTA, did not restart and then flashed Magisk 7.5.3 on inactive slot and then rebooted my phone. Now it is stuck on bootloop.
Even the TWRP is gone but the stock recovery shows that the update is installed.
Do you know any way as to how I can fix this?

I have unlocked bootloader so im not using OTA, just downloading updates from Asus site, after update and phone restart you lose magisk, you have to install magisk manager APK, then via fast_boot install patched boot.img.
That's why i uploaded patched boot.img for 17...., u always have to repeat it after updating.
Right now just flash stock ROM

Ushrael said:
I have unlocked bootloader so im not using OTA, just downloading updates from Asus site, after update and phone restart you lose magisk, you have to install magisk manager APK, then via fast_boot install patched boot.img.
That's why i uploaded patched boot.img for 17...., u always have to repeat it after updating.
Right now just flash stock ROM
Click to expand...
Click to collapse
I also have rooted my device. I downloaded the update zip, kept it on internal storage. rebooted my device and when the update notification showed i updated and did not reboot.
Then i went to magisk and installed the magisk to inactive slot and then went onto reboot my device but now i am stuck on a bootloop.

Today only i updated to A10. Can some tell me how to root and install magisk? I will really appreciate your support.

Spawn_Ishan said:
did not reboot.
Click to expand...
Click to collapse
IDK why did u done it, but maybe installing stock boot.img will help u, install stock same as your rom version.
husen4u said:
Today only i updated to A10. Can some tell me how to root and install magisk? I will really appreciate your support.
Click to expand...
Click to collapse
I can't post links, but just type in google Rog phone 2 magisk, even on XDA u have some instructions, just take my patched boot.img if u have version WW-17.0210.2001.60 instead

Ushrael said:
IDK why did u done it, but maybe installing stock boot.img will help u, install stock same as your rom version.
I can't post links, but just type in google Rog phone 2 magisk, even on XDA u have some instructions, just take my patched boot.img if u have version WW-17.0210.2001.60 instead
Click to expand...
Click to collapse
Installing the stock boot image helped me boot my device, but installing magisk causes a bootloop everytime and even if i try to flash twrp, the phone boots only into twrp and not the system.
Also tried using your patched boot image and tried patching a boot image myself from the magisk manager app but still causes bootloop.
---------- Post added at 10:34 PM ---------- Previous post was at 10:13 PM ----------
Ushrael said:
Hello,
If some1 need boot.img for Rog Phone II update WW-17.0210.2001.60.
Patched with Magisk 7.5.1:
Mirror 1
Mirror 2
Stock boot.img
If you need other version boot.img patched with Magisk just comment or msg me.
Click to expand...
Click to collapse

Can i have a boot.img flashed from magisk manager 7.5.3?
Click to expand...
Click to collapse
where did u found 7.5.3? newest is 7.5.1
Do u have WW or CN ROM

Ushrael said:
where did u found 7.5.3? newest is 7.5.1
Do u have WW or CN ROM
Click to expand...
Click to collapse
I have 7.5.1, i confused the manager version.
I have WW Rom.
Stock image booting works just fine, i can even boot twrp but when i flash magisk the system goes in a bootloop.

Spawn_Ishan said:
I have 7.5.1, i confused the manager version.
I have WW Rom.
Stock image booting works just fine, i can even boot twrp but when i flash magisk the system goes in a bootloop.
Click to expand...
Click to collapse
If u are using TWRP just download magisk 20.3.zip file and flash it with twrp. Don't use patched boot.img.

Ushrael said:
If u are using TWRP just download magisk 20.3.zip file and flash it with twrp. Don't use patched boot.img.
Click to expand...
Click to collapse
Tried that first but it causes bootloop, thats when i resorted to patched boot. Dont know why but flashing magsik anyhow causes a bootloop.
Was able to install magisk after i reset my phone.

can i use your bootstock for relock my android 10? is it possible flash by minimal adb and fastboot?

Fresh boot.img for version WW-17.0230.2004.60

I followed this guide: https://forum.xda-developers.com/ro...-check-change-fingerprint-cn-to-t4002279/amp/
And then i did the update to WW-17.0230.2004.60 and lost root.
How I can root again?
Thank you for share!

Spawn_Ishan said:
Installing the stock boot image helped me boot my device, but installing magisk causes a bootloop everytime and even if i try to flash twrp, the phone boots only into twrp and not the system.
Also tried using your patched boot image and tried patching a boot image myself from the magisk manager app but still causes bootloop.
---------- Post added at 10:34 PM ---------- Previous post was at 10:13 PM ----------
Click to expand...
Click to collapse
did you ever find a solution? I want to update from Android 9 but don't want to end up in your situation.

boot.img for update WW-17.0240.2007.27

Thank you ?????

hi friends, can you tell me please, i have WW installed with twrp, what steps have to do if i want update from another zip update? to avoid problems with encryption for example, or problems with boot img because i have root with magisk, thank you

Related

How to root Samsung Galaxy J2 Pro 2018 : SM-J250F (TWRP+Xposed+SuperSU for SM-J250F)

I am looking for twrp for this handset, then i will install su.
I did not find any results, because the new phone launched.
I need somebody to share (TWRP + SuperSU + Xposed) for SM-J250F
Thank you very much
I have some information: Galaxy J2 Pro SM-J250F specifications
(I do not speak English. I'm using Google Translator. Sorry . . .)
I have the same devices ..
I need twrp for it
I'm using the same device. Looking for a custom recovery
i need twrp for j2 pro (2018)
+1
I have tried CF Auto root, but it didn't work. Did anyone try it?
Croveritiel said:
I have tried CF Auto root, but it didn't work. Did anyone try it?
Click to expand...
Click to collapse
If you want root then download magisk and use the create patched boot image option.
Croveritiel said:
I have tried CF Auto root, but it didn't work. Did anyone try it?
Click to expand...
Click to collapse
I tried using odin to flash unofficial twrp g250 f on my dual sim version. (G250f/ds) It did'nt work and I get some kind of error when going into recovery. Phone still works.
Thank you @ashyx i successfully rooted my device using patched boot img with Magisk. the instructions are explained in the official thread https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445.
I wonder if i can flash supersu with flashfire?
---------- Post added at 02:04 PM ---------- Previous post was at 01:50 PM ----------
SnarfSnarf said:
I tried using odin to flash unofficial twrp g250 f on my dual sim version. (G250f/ds) It did'nt work and I get some kind of error when going into recovery. Phone still works.
Click to expand...
Click to collapse
Yes i got the same, now I tripped knox and therefor I can't use secure folder x)
Croveritiel said:
Thank you @ashyx i successfully rooted my device using patched boot img with Magisk. the instructions are explained in the official thread https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445.
I wonder if i can flash supersu with flashfire?
Click to expand...
Click to collapse
I wouldn't they are not compatible. Also supersu is no longer up to date. Better sticking with Magisk which is under active development.
Tried using magisk method today. I downloaded the rom from sammobile, extracted the boot.img, put it on to the phone, magisk apk than patched it. I put the patched_boot.img back onto my computer and got stuck at fasttboot. I can get "adb devices" to list and connect but nothing for fastboot. I used command- "adb reboot bootloader" -to put phone into fastboot/download mode. I use linux, but also tried it under windows xp and windows 7, I fastboot can not find my phone. Odin can see me phone (Galaxy J2 2018)
So maybe others might have the same problem, maybe I am not putting phone into fastboot mode correctly?
SnarfSnarf said:
Tried using magisk method today. I downloaded the rom from sammobile, extracted the boot.img, put it on to the phone, magisk apk than patched it. I put the patched_boot.img back onto my computer and got stuck at fasttboot. I can get "adb devices" to list and connect but nothing for fastboot. I used command- "adb reboot bootloader" -to put phone into fastboot/download mode. I use linux, but also tried it under windows xp and windows 7, I fastboot can not find my phone. Odin can see me phone (Galaxy J2 2018)
So maybe others might have the same problem, maybe I am not putting phone into fastboot mode correctly?
Click to expand...
Click to collapse
Samsung doesn't use fastboot. You should have used the option to create a tar file then flash with odin.
Hey thanx Ashyx, I got root for J250F/DS! Thanks for the tip.
The phone rebooted and wiped after a message about integrity check fail at boot, but thats fine!
SnarfSnarf said:
Hey thanx Ashyx, I got root for J250F/DS! Thanks for the tip.
The phone rebooted and wiped after a message about integrity check fail at boot, but thats fine!
Click to expand...
Click to collapse
have you recognized that downloading in Samsung applications (Cloud or Galaxy apps) is so slow?
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
By the way, people can use directly the boot.img given in the cf auto root website.
https://desktop.firmware.mobi/device:1868/firmware:15154
Croveritiel said:
have you recognized that downloading in Samsung applications (Cloud or Galaxy apps) is so slow?
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
By the way, people can use directly the boot.img given in the cf auto root website.
https://desktop.firmware.mobi/device:1868/firmware:15154
Click to expand...
Click to collapse
Sorry, I deleted most samsung sys apps along with getting rid of most google stuff as well. I deleted one to many last night and I have to completely start over; used odin. The boot.img I used was in the 2GB zip file I found on sammobile, opened the AP*meta.tar.md5 and extracted the boot.img. I am not a rockstar in rooting, I did check the md5sum and both where different (desktop.firmware.mobi and the one I downloaded). I will say the rom I found on sammobile was the same listed in my phone under baseband version. I was a little skeptical because I didn't see any mention of DS (dual sim), but after flashing both sims work fine.
I'm retiring my old daily driver a Samsung S2, I noticed on my J2 phone I have option to encrypt sdcard but nothing mentioned about the phones storage. I guess I have some searching to do. cheers
3 cheers for removable battery, headphone jack and root.
SnarfSnarf said:
Hey thanx Ashyx, I got root for J250F/DS! Thanks for the tip.
The phone rebooted and wiped after a message about integrity check fail at boot, but thats fine!
Click to expand...
Click to collapse
can you tell me ..how did you root this device ? Plz and thanks..
If you have twrp can you send it ?
Ahmedzero800 said:
can you tell me ..how did you root this device ? Plz and thanks..
If you have twrp can you send it ?
Click to expand...
Click to collapse
Hello, I used magisk as recomended. I dont have twrp and I didnt see a rooted rom anywhere. Follow the magisk link Croveritiel posted. You will need: windows with odin, samsung drivers, boot.img and magisk manager.apk installed on your phone. For finding the boot.img I looked at my phones baseband version and downloaded the same stock rom from sammobile.com, extracted the zip, and extracted boot.img from the larger ap*.md5sum file. Transfer boot.img to phone. Open magisk manager on your phone and change the settings pached boot output format to img.tar . Next is to let magisk do its thing and it will make a new file named patched_boot.img.tar (or somthing similar). Move that file onto your pc, start odin, select ap and put phone into download/odin mode. Your phone will wipe when it reboots. After it reboots put magisk manager.apk back onto your phone. Your now rooted.
Ahmedzero800 said:
can you tell me ..how did you root this device ? Plz and thanks..
If you have twrp can you send it ?
Click to expand...
Click to collapse
@SnarfSnarf explained it all. the little difference in my case was downloading the boot.img directly from https://desktop.firmware.mobi/, I don't know if it is the right way but it worked for me.
Okey I have secssfully rooted my sm-j250f
But I am looking for twrp for it
I need to make backup and install roms
Can someone halp us ??.
Thanks .
Ahmedzero800 said:
Okey I have secssfully rooted my sm-j250f
But I am looking for twrp for it
I need to make backup and install roms
Can someone halp us ??.
Thanks .
Click to expand...
Click to collapse
You can do all that with Flashfire.

[ROM/FW][STOCK][PIE] LG V30 (Joan) US998 30b TWRP flashable firmware ROM

LG V30 US998-30b ROM​Hi!
This Rom is 99% Stock. 3.2.3-7 TWRP should first be installed. Then you can install this Rom and have Pie with working TWRP.
WARNINGS!!!!!
Only for North American variants -- EXCEPT T-mobile H932. NOT for H930, H930G, H930D, H930DS!
This zip is created from the original KDZ. It contains almost the complete 30b firmware, but the partition table rewriting part and recovery image is removed. I changed the system.img, so you do not have to reinstall TWRP (recovery-from-boot.p deleted) when ROM is booted. I also changed the partition size of system.img, so the vendorized people can install this too without having problems because of a too small system partition. This is a continuation of westwood24's idea and work, I've updated it to the newest fw version and edited / advanced it a bit. I followed his idea and made this for users who can not take OTA's because they have Custom Recovery / Root installed.
​
Features
Stock build made from official KDZ
Stock Build.prop (only 2 extra lines added for DTS, full weather lockscreen)
Unrooted
System image modified to keep TWRP
System image size shrunk for being able to flash this on a smaller system partition, mainly caused by vendorizing
Removed dm-verity
Removed rctd (LG's root checker tool daemon)
Enabled opt-encrypt, it's your choice now if you want to encrypt your phone, it's no more forced. TWRP now is capable of decryption (both AOSP and stock) since a few versions
Installation
What you need
Unlocked Bootloader [How to do]
Working TWRP installed (should be installed already, otherwise you wouldn't need this zip )[Link to newest unofficial TWRP]
When you need Root, Latest Magisk [Download]
LATEST ZIP
john-fawkes.com US99830b.zip [Click to Download]
OLDER ZIPS
AFH ZIPS [Download]
John-fawkes.com [Download]
How to install
When you are still on Nougat,
you should start fresh: Reboot to recovery using button combo or reboot app (needs root; btw, Magisk offers this possibility too: Menu -> Modules -> three dot menu top right - Reboot to recovery)
Then flash this TWRP.img via image flashing function in TWRP, reboot to recovery again (for fully working new recovery) and do a backup, then copy this backup to your PC.
Then initiate a factory reset. Wipe your system partition too in TWRP advanced wiping menu, copy the 30b firmware zip to your SD and install it. Reboot and enjoy
From Oreo:
For clean install: Factory reset and wipe system
You can also keep your data by simply dirty flashing the zip. *Be aware that problems may occur, maybe you need to do a factory reset to start fresh*
Flash the 30b zip, then Magisk zip when you need root, then reboot to System = you're DONE
P.S.: could be, that you first need to boot up your fresh install and set it up before you can flash magisk.
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no (in newest TWRP SU is disabled, and the option to install the TWRP app is disabled too.)​
Rom Version
Android Version: 9.0 Pie
Android security patch level: 2019-09-1
Don´t forget to hit the thanks-button if you like this zip! :good:
You want to help me with a [donation?] Not asking for it, I have fun doing this for you, but feel free...
reserved
reserved
@ChazzMatt
Thank you very much for sharing. Currently downloading
Sent from my LG-H930 using Tapatalk
Wow, that was quick. Thank you very much for all your efforts!
Thank you so much for your flashable zip to stock pie! Before i installed Android 10 and lost my sensors, camera and download mode, but because of your ROM i installed it through TWRP and everything started to work fine. Thank you again, you saved my phone!
I am on a VS996 running stock VS96620k Oreo. I have unlocked bootloader, twrp and root.
Can I switch directly over to US998 Pie via this flashable zip in TWRP or do I need to LGUP Partition DL the kdz?
TIA
idk what the hell is going on when i flash kdz it stucks at v30 logo
when i flash twrp zip it also stucks at v30 logo dont know what to do
Ali1228 said:
idk what the hell is going on when i flash kdz it stucks at v30 logo
when i flash twrp zip it also stucks at v30 logo dont know what to do
Click to expand...
Click to collapse
Downgrade to us998-10d nougat via dual mode lgup, boot up, then kdz 30b
---------- Post added at 05:01 AM ---------- Previous post was at 05:00 AM ----------
taspankya said:
I am on a VS996 running stock VS96620k Oreo. I have unlocked bootloader, twrp and root.
Can I switch directly over to US998 Pie via this flashable zip in TWRP or do I need to LGUP Partition DL the kdz?
TIA
Click to expand...
Click to collapse
Clean flash
HueyT said:
Downgrade to us998-10d nougat via dual mode lgup, boot up, then kdz 30b
Already done didnt work still stuck at v30 logo
not sure why its happening
i am following all everything the kdz thread includes but still not working
oreo and nougat works fine
only stucks at pie
both for kdz and flashable zip
Click to expand...
Click to collapse
Ali1228 said:
HueyT said:
Downgrade to us998-10d nougat via dual mode lgup, boot up, then kdz 30b
Already done didnt work still stuck at v30 logo
not sure why its happening
i am following all everything the kdz thread includes but still not working
oreo and nougat works fine
only stucks at pie
both for kdz and flashable zip
Click to expand...
Click to collapse
i have the same issue
Click to expand...
Click to collapse
Did u guys cross flash to h930-30b before? May need to downgrade to h933-10d instead of us998-10d, then 30b
HueyT said:
Did u guys cross flash to h930-30b before?
Click to expand...
Click to collapse
no i purchased h931 which was rooted converted to us998
---------- Post added at 11:13 AM ---------- Previous post was at 11:12 AM ----------
also i was able to bootloader unlock h931 it was at 20a already and installed twrp to flash us99820h twrp zip
Ali1228 said:
no i purchased h931 which was rooted converted to us998
Click to expand...
Click to collapse
Canadian 10d fixes AOSP looping too. Try partition dl, dual mode lgup, choose all partitions of h93310d, boot up, then us99830b kdz
HueyT said:
Clean flash
Click to expand...
Click to collapse
Sorry, can you define?
taspankya said:
Sorry, can you define?
Click to expand...
Click to collapse
The first part of "How to install" in the OP describes a clean flash. It's wiping the phone clean.
Sent from my LG-US998 using Tapatalk
Do I need the beta "Pie" TWRP to flash this?
Jimmy_Z said:
Do I need the beta "Pie" TWRP to flash this?
Click to expand...
Click to collapse
No. 3.2.3.7.
ChazzMatt said:
No. 3.2.3.7.
Click to expand...
Click to collapse
Has anyone done a dirty flash with the flash zip?

10.0.5 boot.img?

Hey all! I'm trying to root my OnePlus 7t but I'm on 10.0.5 stock and I can't find a patched boot.img, or even a stock one to patch in Magisk. I'm on the global variant. If someone could point me in the right direction, that would be grand. I have already read mostly all the posts...
I have the US version which I think is also the global version. Here's my patched boot.img for 10.0.5
https://drive.google.com/file/d/12tZN5D7dmovIeqsx8sTF-B0z2gxA6LG8/view?usp=sharing
Here's the stock boot for 10.0.5 as well if you screw something up.
https://drive.google.com/file/d/1nS0hqVCyntXHjbTzOH7H8-b29-IlAOIt/view?usp=sharing
Don't ask why the file sizes are so different. It just gets smaller for some reason after patching it in magisk.
I just booted with an older one and flashed the latest magisk
Need 10.0.5 boot.img stock & magisk patched for indian varient
Hey .... Can you help me with the 10.0.5 boot.img , stock & magisk patched for indian varient HD1901 of 7t
ChongoDroid said:
I just booted with an older one and flashed the latest magisk
Click to expand...
Click to collapse
I had tried booting with 10.0.3 while on 10.0.5 , Did not turn out well .
Has anyone on 10.0.5 tried booting w/ the above 10.0.5 patched img ?
Stock and Magisk patched boot.img files for HD1905 7T update version 10.0.5:
dropbox.com/s/887ibs0yorxgs2v/boot.img?dl=0
dropbox.com/s/sxrayyjn562susu/magisk_patched.img?dl=0
SkippRunning said:
Stock and Magisk patched boot.img files for HD1905 7T update version 10.0.5:
dropbox.com/s/887ibs0yorxgs2v/boot.img?dl=0
dropbox.com/s/sxrayyjn562susu/magisk_patched.img?dl=0
Click to expand...
Click to collapse
Do I only need to flash the patched img or both ?
And do they need to be flashed to both A and B slots ?
Thanks for sharing
hightech316 said:
Do I only need to flash the patched img or both ?
And do they need to be flashed to both A and B slots ?
Thanks for sharing
Click to expand...
Click to collapse
I would try fastboot boot before you use fastboot flash just to make sure that the device will boot successfully with the images. You should only need to fastboot boot magisk_patched.img, then open Magisk Manager and install Magisk by choosing the direct install option in the list. You only need the steps I mentioned to have root, and if you flash it to A and B at once you can get stuck in a bootloop. I had that happen at one point from flashing both partitions, and I dont recommend trying it.
SkippRunning said:
I would try fastboot boot before you use fastboot flash just to make sure that the device will boot successfully with the images.
Click to expand...
Click to collapse
Thanks , this can save a headache !
hightech316 said:
Thanks , this can save a headache !
Click to expand...
Click to collapse
Ya, I tried every relevant boot image I could find in the forums, and the device didnt work properly with any of them. The only one that allowed the device to boot successfully caused the wifi and sounds to not work. So I downloaded the full update from OnePlus and extracted it to a folder, then used payload dumper to extract all of the individual images out of the payload.bin file from OnePlus. I copied the boot.img into the phone storage and installed Magisk Manager, then patched the stock boot.img and copied it from the phone to my pc. Then I used fastboot boot magisk_patched.img to make sure the image I made would work. I booted the device and inside Magisk Manager I chose direct install in the list of options and everything went smoothly, and I didnt need to rely on finding images online that would hopefully work.
smokeythebear3 said:
I have the US version which I think is also the global version. Here's my patched boot.img for 10.0.5
https://drive.google.com/file/d/12tZN5D7dmovIeqsx8sTF-B0z2gxA6LG8/view?usp=sharing
Here's the stock boot for 10.0.5 as well if you screw something up.
https://drive.google.com/file/d/1nS0hqVCyntXHjbTzOH7H8-b29-IlAOIt/view?usp=sharing
Don't ask why the file sizes are so different. It just gets smaller for some reason after patching it in magisk.
Click to expand...
Click to collapse
Thanks a bunch for the share. That was the missing piece that I've been looking for. I have the HD1905 variant and I just used Magisk to patch the stock file you provided. After testing, I'm finally rooted. Thanks again.

root 10.5.8

For whatever reason OnePlus removed the 10.5.8 update from their server. Therefore we can't patch to boot img.
The steps I took were
1. Patch 10.5.6 boot the img in fastboot
2. Reboot into system setup magisk
3. Reboot again in fastboot
4. Boot magisk patched img
5. Go into magisk and install and choose direct install
6. Profit with a 10.5.8 device without the wifi/gps/Bluetooth issues.
Thought I'd share my experience as I bought second hand and it had the latest update and couldn't find the download link to the full system update.
Might want to mention which Magisk, the known problem with Canary?
Also why patch 10.5.6 and not 8
dladz said:
Might want to mention which Magisk, the known problem with Canary?
Also why patch 10.5.6 and not 8
Click to expand...
Click to collapse
He dont have the 10.5.8.full rom to extract and patch the img
So he probably patch the 10.5.6 img , he just boot it temporary on fastboot , going to magisk ,installing magisk and when he's rebooting , he's on 10.5.8 rooted..
Here's stock boot for 10.5.8IN11BA if anyone needs it https://mega.nz/file/sb4WwSBS#jrCL7tek0SLbynTqbPU-s_j5g0cKFRsC4u7DR7S7sCI
cultofluna said:
He dont have the 10.5.8.full rom to extract and patch the img
So he probably patch the 10.5.6 img , he just boot it temporary on fastboot , going to magisk ,installing magisk and when he's rebooting , he's on 10.5.8 rooted..
Click to expand...
Click to collapse
Can't you get it from the updater?
dladz said:
Can't you get it from the updater?
Click to expand...
Click to collapse
Not if you have already updated via the OTA..
He probably got the OTA ( full zip) install it and then boot it..
If you've updated via local upgrade , then the full ROM zip has been saved on internal storage ...
But the easiest way to update and keep root is to just take the ota through the updater..dont reboot go to magisk manager , install magisk on inactive slot , ...done...
Patched img only needed to root after unlocking bootloader ..
Not anymore....
Bought the device updated already and can't find the 10.5.8AA build at all on OnePlus
facing the same issue... if anyone have the 5.8 aa it would be a great help <3
empreror said:
facing the same issue... if anyone have the 5.8 aa it would be a great help <3
Click to expand...
Click to collapse
Patch the 10.5.6 boot IMG and the fastboot boot <patchedmagisk.img>
Setup magisk and reboot into bootloader again to boot the patched image
Then go into magisk and do direct install and finally have working wifi etc.
10.5.8AA Oneplus Pro8 boot.img
https://sourceforge.net/projects/op8pro1058aa/files/10.5.8AA.img/download
bigjailerman said:
10.5.8AA Oneplus Pro8 boot.img
https://sourceforge.net/projects/op8pro1058aa/files/10.5.8AA.img/download
Click to expand...
Click to collapse
Is this the stock boot.img or rooted patched img?
Aporzio said:
Is this the stock boot.img or rooted patched img?
Click to expand...
Click to collapse
Tried it, it's patched.
Aporzio said:
Is this the stock boot.img or rooted patched img?
Click to expand...
Click to collapse
Yes it is patched...sorry for delay
bigjailerman said:
Yes it is patched...sorry for delay
Click to expand...
Click to collapse
Not a problem. I'm glad you didn't answer lol. I ended up teaching myself how to pull the img files from a payload.bin.
JKurtz87 said:
Patch the 10.5.6 boot IMG and the fastboot boot <patchedmagisk.img>
Setup magisk and reboot into bootloader again to boot the patched image
Then go into magisk and do direct install and finally have working wifi etc.
Click to expand...
Click to collapse
Can you be please more specific? I am new here and want to know what does it mean boot temporarily ? This command will boot your device temporray and after reboot it disappear ?
fastboot boot <patchedmagisk.img>

OOS 10.0.11 Magisk patched boot.img

Extracted by payload_dumper from the Global ROM here:
https://www.xda-developers.com/oneplus-7-oneplus-7t-series-oxygenos-updates-dolby-atmos-support-bullets-wireless-z-epic-games-store-india/
Click to expand...
Click to collapse
Unzip it and do the same things as usual.
Tested on my HD1900.
I was waiting for this file because I do not know how to extract it from the update file. Thank you very much, man. I hope it works. I will install the update now.
Hi ! Can somebody provide me the stock 10.0.11 boot.img please?
Edit : Nevermind, found it, thanks
E!eventh said:
Hi ! Can somebody provide me the stock 10.0.11 boot.img please?
Edit : Nevermind, found it, thanks
Click to expand...
Click to collapse
can you please share the file, I still cant find it.
Didn't work, still not rooted and now i have lost wifi.
Hi all here is the img for EU 1 0.0.11 HD65BA
Share it from my google drev https: //drive.google.com/file/d/1MgIHIepR_Z6b7frg22yuTTSNuWkwqNAV/view?usp=sharing
the heatkiller said:
Hi all here is the img for EU 1 0.0.11 HD65BA
Share it from my google drev https: //drive.google.com/file/d/1MgIHIepR_Z6b7frg22yuTTSNuWkwqNAV/view?usp=sharing
Click to expand...
Click to collapse
Thanks, i can see my sim card details now and wifi is connected. Still not able to use Google Pay though, it complains it is rooted. cts profile is red. Not sure what i have to do to fix that
---------- Post added at 09:44 PM ---------- Previous post was at 09:37 PM ----------
the heatkiller said:
Hi all here is the img for EU 1 0.0.11 HD65BA
Share it from my google drev https: //drive.google.com/file/d/1MgIHIepR_Z6b7frg22yuTTSNuWkwqNAV/view?usp=sharing
Click to expand...
Click to collapse
Thanks, i can see my sim card details now and wifi is connected. Still not able to use Google Pay though, it complains it is rooted. cts profile is red. Not sure what i have to do to fix that
Is it safe to try another boot.img without deleting an existing one on your phone?
KashMiester said:
Thanks, i can see my sim card details now and wifi is connected. Still not able to use Google Pay though, it complains it is rooted. cts profile is red. Not sure what i have to do to fix that
---------- Post added at 09:44 PM ---------- Previous post was at 09:37 PM ----------
Thanks, i can see my sim card details now and wifi is connected. Still not able to use Google Pay though, it complains it is rooted. cts profile is red. Not sure what i have to do to fix that
Click to expand...
Click to collapse
I think its because you don't have enabled Magisk Hide from Magisk settings..please inform if that's not a solution
Hi,
Im trying to flash the patched 11BA img but I got stuck at boot animation.
Flashing again the stock image works fine.
Any suggestions? I Patched the image using magisk itself.
Regards,
Hi guys
Can any one provide 10.3.3 (India) stock or patched boot img
I can't find it at all
Yesterday I just received my new "OP7T Global ROM - HD1900".
Unbox it and played for a few hours with the build in version of Oxygen OS (HD65AA) with the latest update downloading in the background.
After a few hours I decided to try and root the device and instal Adaway so I unlocked the bootloader and flashed this boot image.
Everything went well but if I remember correctly there was a Weather App and a Recorder App in the out of the box pre-installed Oxygen OS and now after I flashted the root image with Magisk patched there are nowhere to be found. Is this root patched image suited for the global ROM or there is for the European ROM? Did the flashing of the patched image removed the two apps or the latest update doesn't include them?
here the same no SIM. anyone a new magisk boot.img European Version ??????
pikakolendo said:
Extracted by payload_dumper from the Global ROM here:
Unzip it and do the same things as usual.
Tested on my HD1900.
Click to expand...
Click to collapse
I flashed this boot image file and rooted my phone, but now it is laggy and I can't turn on my wifi. Help?
m1606 said:
I flashed this boot image file and rooted my phone, but now it is laggy and I can't turn on my wifi. Help?
Click to expand...
Click to collapse
I thing this patched boot image is for the Global ROM Oxygen OS 10.0.11 HD65AA Phone model HD1900.
What version of the phone do you own?
You can always flash back the original boot image the same way you flashed the patched image.
(Although I have the global model, I wanted to test the European ROM and rooted with this patched boot image. I had problems with SIM recognition and lag. So I wipe everything and flashed back the Global ROM)
frankzappatistas said:
I thing this patched boot image is for the Global ROM Oxygen OS 10.0.11 HD65AA Phone model HD1900.
What version of the phone do you own?
You can always flash back the original boot image the same way you flashed the patched image.
Click to expand...
Click to collapse
I tried the Uninstall button in Magisk and now my phone won't boot. What can I do now?
m1606 said:
I tried the Uninstall button in Magisk and now my phone won't boot. What can I do now?
Click to expand...
Click to collapse
First of all you have to clarify what version of the phone do you have, European or Global.
Next step should be to find the stock boot.img for your ROM and then flash it with fastboot commands the same way you flasthed the Magisk patched boot.img
frankzappatistas said:
First of all you have to clarify what version of the phone do you have, European or Global.
Next step should be to find the stock boot.img for your ROM and then flash it with fastboot commands the same way you flasthed the Magisk patched boot.img
Click to expand...
Click to collapse
I live in Europe, and I bought the phone from OnePlus, so I guess it is European. How to find the stock boot.img?
m1606 said:
I live in Europe, and I bought the phone from OnePlus, so I guess it is European. How to find the stock boot.img?
Click to expand...
Click to collapse
OK, if you bought the phone form official Oneplus store then you defensively have the European version.
The stock boot image is inside the Fastboot ROM zip. You can download the hole file from the following link
https://sourceforge.net/projects/fastbootroms/files/OnePlus 7T/
Assuming that you were on the latest update, you want to download the file 10.0.11-EUROPE-OnePlus7TOxygen
When you downloaded, unzip it and look for a file named "boot.img" that is your stock boot image. You can flash it the same way you flashed the Magisk Patched boot.img. Then the phone should boot with no problems.
frankzappatistas said:
OK, if you bought the phone form official Oneplus store then you defensively have the European version.
The stock boot image is inside the Fastboot ROM zip. You can download the hole file from the following link
https://sourceforge.net/projects/fastbootroms/files/OnePlus 7T/
Assuming that you were on the latest update, you want to download the file 10.0.11-EUROPE-OnePlus7TOxygen
When you downloaded, unzip it and look for a file named "boot.img" that is your stock boot image. You can flash it the same way you flashed the Magisk Patched boot.img. Then the phone should boot with no problems.
Click to expand...
Click to collapse
I contacted OnePlus support and they said they will send me some files and then arrange a remote session to flash a new OS to my phone. If that does not work, I will try your method.
---------- Post added at 04:15 PM ---------- Previous post was at 04:00 PM ----------
frankzappatistas said:
OK, if you bought the phone form official Oneplus store then you defensively have the European version.
The stock boot image is inside the Fastboot ROM zip. You can download the hole file from the following link
https://sourceforge.net/projects/fastbootroms/files/OnePlus 7T/
Assuming that you were on the latest update, you want to download the file 10.0.11-EUROPE-OnePlus7TOxygen
When you downloaded, unzip it and look for a file named "boot.img" that is your stock boot image. You can flash it the same way you flashed the Magisk Patched boot.img. Then the phone should boot with no problems.
Click to expand...
Click to collapse
And also, I flashed the boot image you provided which caused this problem. What is wrong with your boot image?

Categories

Resources