[ROM][I9300I/I9301x][6.0.1] SEPerience-ROM A5 2017 Port v3.1 UF4 - Galaxy S3 Neo Android Development

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PLEASE READ THE F.A.Q IN POST #3 FIRST AS IT ANSWERS MOST COMMON QUESTIONS!​
Disclaimer:
Code:
/*
* Your warranty is or isn't void now.
* I'm not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app were on strike.
* Please READ the thread and F.A.Q, if you have any concerns
* about features included in this ROM before you flashing it!
* YOU, are choosing to make these modifications,
* so don't blame anyone else for messing up your device
+ after flashing this ROM.
*/
Variants:
Supported:
Galaxy S3 Neo+: GT-I9301I, GT-I9301Q
Galaxy S3 Neo (Duos): GT-I9300I
Unsupported:
Galaxy S3 Neo+: GT-I9308I
Galaxy S3 Lite: SCH-I939I
ROM information and features:
Base: G800HXXU1CRJ1
Port: A520FXXS2AQH1
Powered by SEPerienceKernel v4.0
Android 6.0.1 Marshmallow
Security patch level 2017-08-01
Deknoxed
Debloated
Deodexed
Full Grace UX featured
Aroma installer
Air Message
Always On Display
App Lock
Call recording
Custom CSC feature v1.0 support
Disabled tima service
Manage app data (built-in firewall)
MirrorLink
Multi Window with pop-up view support
Native 720p60 video playback support (1080p60 works too but not recommended)
OMC (Multi-CSC) support (full list below)
One-handed operation
Game Launcher
Game Tools
Themes Store
Screen Recorder
Smart Manager and Clock China with additional features
Smart Stay
Smart View (screen mirroring)
And more...
About SEPerienceKernel v4.0:
Marshmallow 6.0.1 kernel based on G800HXXU1CRJ1 source
Linux version 3.4.0
Built with Google Linux GCC 4.9.x (32-bit)
Optimized for s3ve3g devices
SWAP RAM support (1023 MB)
New sdcard file system v3.2.0 (stock kernel v2.1.0)
Overall new and/or updated kernel device drivers (wifi, radio, graphics, mdss (2015), vibrator, etc)
Camera driver supports both s5k4h5yb and imx175 camera modules
New charger driver (qpnp-charger) with full samsung battery driver support
Added LZ4 de/compressor support (enabled in crypto and zswap)
CPU Governors:
ondemand
interactive (default)
userspace
powersave
conservative
performance
GPU Governors:
msm_cpufreq
msm-adreno-tz (default)
userspace
powersave
performance
simple_ondemand
IO Schedulers:
cfq (default)
deadline
noop
row
CPU frequencies 300MHz - 1401MHz
GPU frequencies 200MHz - 450MHz
CPU Hotplug support (requires active mpdecision binary)
OTG support (no root or Y-Cable required)
SSRM support
SELinux is enforcing
Known bugs and issues:
FM Radio (FM receiver works fine however audio HAL doesn't support native FM playback; unfixable)
Found a bug which isn't listed here? Please report it with a proper logcat. Bugs caused by 3rd party applications and features (e.g. rooting) are unrelated to the ROM and will be ignored.
Installation:
Before you proceed, make sure you have the latest KitKat Bootloader & Modem installed else you'll encounter RIL issues! F2FS is NOT supported!
If coming from stock: flash any TWRP Recovery with aroma installer support. Recommended are official releases.
Download the ROM zip and push it to internal or external storage
Boot to TWRP Recovery (volume up button + power button)
Backup your current ROM in case something goes wrong
Perform a Full Wipe (system, dalvik-cache, data, cache)
Install the ROM and follow the aroma steps
Reboot to System
Note: First boot may take up to 15 minutes, if it takes longer than usual then you probably selected the wrong camera sensor.
Download:
Latest v3.1 (UF4): AndroidFileHost
Mirror 1: AndroidFileHost (Temporary)
Mirror 2: Telegram Channel (Temporary)
New keylayout:
OMC (Multi-CSC) supported countries:
Spoiler: View available CSCs
Code:
ACR - Ghana
AFG - Afghanistan
ATO - OpenAustria
AUT - Switzerland
BGL - Bulgaria
BNG - Bangladesh
BTC, LYS - Libya
BTU*, XEU - United Kingdom & Ireland
BVO - Bolivia
CHO - Chile
DBT - Germany
EGY - Egypt
ETL - Czech Republic
EUR - Greece
INS - India
ITV - Italy
KSA - Saudi Arabia
LUX - Luxembourg
MAT, MWD - Morocco
MID - Iraq
NEE - Nordic Countries
ORX - Slovakia
PAK - Pakistan
PHE - Spain
PHN - Netherlands
ROM - Romania
SEB - Baltic
SEE - South East Europe
SEK - Ukraine
SER - Russia
SLK - Sri Lanka
THR - Iran
TPA - Panama
TPH - Portugal
TTT - Trinidad and Tobago
TUN - Tunisia
TUR - Turkey
XEF - France
XEH - Hungary
XEO - Poland
XFA, XFE - South Africa
XSG - United Arab Emirates
ZTO - Brazil
* default CSC
If your CSC is not included then OMC will automatically use the default CSC (BTU)
Notes:
This ROM is NOT prerooted
SoundAlive has been downgraded to 2.0 (old S5 styled UI)
Credits:
@ananjaser1211 for always being there if I needed help :highfive:
@Thargorsson, @RomanDesigner, @Alastor89 and everyone else from S3NEO_github
@Pavlex4 for OTG power fix in kernel :highfive:
@malbert16442 for his awesome porting guide
@Ticklefish for TMA and TOAD
@amarullz for aroma installer
Last but not least I want to thank my tester and homie @EBY
PM me if I forgot someone
Sources:
SEPerienceKernel:
Source code: https://github.com/prototype74/android_kernel_samsung_msm8226/tree/tw-6.0.1
Additional sources:
S3NEO: https://github.com/S3NEO
Additional information:
Contributors
@prototype74, S3NEO_github
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest KitKat Bootloader and Modem
Based on: Samsung Grace UX
Version Information
Status: Stable
Current Version: v3.1 UF4
Stable Release Date: 2021-06-12

Changelog:
v3.1 (UF4) - 2021-06-12 (latest):
- Fix screen write app crash when drawing on screenshots
- Fixed some UI animations
- General stability and performance improvements
-> Full changelog for v3.1
v3.0 (TK5) - 2020-11-27 (old):
- Disabled green battery icon in AOD (doesn't affect status bar)
- Disabled font scale with density (feature moved to content scaling which prompt a reboot)
- Fixed Always On Display crashes
- Fixed brightness in stock camera app
- Fixed camera crashes when starting from s view cover
- Fixed low mic sensitivity in-calls (also in video calls)
- Improved GPS fix
- Removed LTE from network modes completely and switched network mode options to WCDMA/GSM (3G/2G)
- Removed DCM manager (tlc dcm not supported)
- Removed unsupported settings (screen mode, device encryption etc.)
- Updated ACDB blobs (s3ve3g based)
- Updated APN configurations
- Updated EPDG service
- Updated Telephony service with full Qualcomm QMI support
-> Full changelog for v3.0
v2.0 - 2020-09-26 (old):
- Rebased port to A520FXXS2AQH1
- New SSRM props optimized for s3ve3g devices
- Added ANT service support
- Added Hardware-backed Keystore (QCOM HAL, version 3) support
- Fixed charging monitoring
- Fixed Samsung camera shooting modes and filters
- Fixed Sony IMX175 camera (+ flashlight)
- Fixed sapamonitor crashing when connecting OTG
- Fixed force close when cutting pictures
- Fixed invalid permissions
- Proper configs for interactive governor
- Removed FM Radio application
-> Full changelog for v2.0
v1.5 - 2020-04-12 (old):
- Fixed SIM detection (I9300I)
- Device status official
- Green battery icon (selectable in aroma)
- Added more layouts to AOD
- Removed S Voice as Samsung announced to discontinue the service
- Extended OMC (47 supported CSCs)
v1.0 - 2020-03-27 (old):
- initial release

F.A.Q
Q: How to root it?
A: Grab Magisk from here.
Q: Does Wi-Fi, Bluetooth, Camera, (dual) SIM, GPS, NFC etc. work?
A: This is a common question but asked very often. Yes everything works execpt those which are mentioned in Known bugs and issues section.
Q: My phone stucks at splash screen.
A: This means you don't have latest KitKat Bootloader & Modem installed as mentioned in installation instructions or the installation was not successful.
Q: My phone bootloops!
A: You probably selected the wrong camera sensor. Reflash the ROM without wipes and select the correct camera sensor. For all other cases make sure you followed the instructions carefully.
Q: ROM booted but there are some apps missing. Why you removed these apps?
A: I didn't, YOU removed them in aroma installer. Reflash the ROM again without wiping data and this time don't remove them.
Q: My signal constantly disconnects and shows "No Service" in statusbar or my SIM isn't working at all.
A: We're using the latest Marshmallow MSM8626 GSM RIL blobs, so make sure your baseband is up-to-date too, if that's the case then probably your provider doesn't support all network bands. So check if your provider supports 3G and 2G networks in order to have a stable connection.
Note: Some providers shutdown 3G network to focus to newer 4G/5G network technologies. It might be possible that your provider did shutdown most or all 3G and/or 2G networks.
Q: What's the difference between (n_)s3ve3g, (n_)s3ve3gxx, s3ve3gjv, s3ve3gds and s3ve3gdd in about phone?
A: The differences in kernel name or build number represents as following:
In Kernel name:
- n_s3ve3g: Samsung camera with NFC
- s3ve3g: Samsung camera without NFC
- n_s3ve3gxx: Sony camera with NFC
- s3ve3gxx: Sony camera without NFC
In build number:
- s3ve3g: GT-I9301I (Samsung camera)
- s3ve3gxx: GT-I9301I (Sony camera)
- s3ve3gjv: GT-I9301Q
- s3ve3gds: GT-I9300I
- s3ve3gdd: GT-I9300I (without NFC)
Q: Does SafetyNet pass?
A: Yes, it does. Rooting or other heavy ROM modifications may cause SafetyNet to fail, so be aware of it.
Q: Can I use NFC for mobile payments?
A: Unfortunately no, our NFC chip doesn't support HCE (Host Card Emulation) which is required for mobile payments with NFC. Only Android Beam is supported.
Q: There is no NFC option!
A: As a reminder, s3ve3gdd (I9300I SWA variant) does not support NFC, if you own one then you won't be able to use it, if not check these:
- Check if your baseband/bootloader does not start with "I9300IDD"
- Kernel version naming ends with "n_s3ve3g" or "n_s3ve3gxx"
- Make sure your battery has a NFC chip (from NXP pn547) included which is meant for S3 Neo (it's usually printed as "Near Field Communication")
Only if all cases above are present, you will see NFC option and an icon in statusbar if enabled
Q: My phone's CPU doesn't enter deep sleep. Is that a bug?
A1: Seems so but from Samsung side. Just peform a normal reboot but not while connected to any charger/usb cable.
A2: This bug has been fixed in v2.0+. If your CPU can't enter deep sleep anyway, then it's most likely caused by an app.
Q: Can I flash a camera fix from other ROMs to fix camera (sony)?
A1: If it would fix it, don't you think I would have it implemented in this ROM already? No, camera fixes from other ROMs will not fix the camera and it's highly recommended NOT to flash them in this ROM!
A2: This bug has been fixed in v2.0+
Q: My GPS does not find my location. Any fix?
A: Download GPS Test app from Google play, run it, go outside and wait 10 minutes to get your fix
Q: How about random reboots?
A: This ROM is guaranteedly not affected by random reboots
Q: Do I have to clean flash when there is a new update?
A: Nope.
Q: There is no CSC folder in /system. How to add CSC features?
A: This ROM is featured with OMC, a new multi CSC solution. Locate to /system/omc and add your features to seperience.xml (custom csc).
Q: I've selected screen recorder in aroma but I can't find it in settings. How to use screen recorder?
A: You can find it's settings in settings > advanced features > screen recorder. To start recording, pull down quick settings, search for Screen Capture tile, extend it and select screen recorder.
Q: XYZ app does not work/force closes and I want create a log to help you. How can I create a logcat?
A: I'm glad you'd like to help. Follow this xda tutorial or download any logcat app from Google Play.
Q: Will there be a nougat Samsung experience port?
A: It was planned. More info here.
Q: I can select LTE in mobile data settings. Does that mean I can use LTE?
A: No, it shouldn't even be selectable. If you can select it anyway (for some reasons) then please report it here.
Q: Does this ROM support samsung's secret codes (in phone app)?
A: Sure. Here are some useful codes:
*#1234# (SW) or *#12580*369# (HW/SW) - Version
*#06# - IMEI and serial number
*#0228# - Battery calibration (use it only if necessary)
*#34971539# - Camera firmware
*#0*# - Hardware test menu
Q: Do I have to flash Galaxy A5 2017 mods, recoveries etc. when I use this ROM?
A: NO! This ROM will not transform your Galaxy to an A5. Only flash mods, recoveries etc. meant for your device variant.

reserved just in case too

Can you renew the security patch of this rom ;;

Amazing work my friend, Keep it up!

phonelover1000 said:
Can you renew the security patch of this rom ;;
Click to expand...
Click to collapse
we're depending on official releases from samsung. the last official release was back in 2018 but with august 2017 security patch. so no I can't renew the current security patch level unless samsung decides to release a new official build with newer patch.

OK THANKS.

Where can I find the latest bootloader and modem??

Iran not supported?
Iran not supported? It does not support Iranian operators

haseeb24 said:
Where can I find the latest bootloader and modem??
Click to expand...
Click to collapse
It depends on your device. What model do you own GT-i9301l or the GT-i9300i ;;; (You can identify it from an app called phone info sam in playstore)

phonelover1000 said:
It depends on your device. What model do you own GT-i9301l or the GT-i9300i ;;; (You can identify it from an app called phone info sam in playstore)
Click to expand...
Click to collapse
Mine is GT-i9301I.

haseeb24 said:
Mine is GT-i9301I.
Click to expand...
Click to collapse
This is the latest stock rim for the s3 neo GT-i9301l:https://samfrew.com/download/GALAXY__S__Ⅲ__Neo__/3k7n/COS/I9301IXCUARA1/I9301ICOSARA1/

phonelover1000 said:
This is the latest stock rim for the s3 neo GT-i9301l:https://samfrew.com/download/GALAXY__S__Ⅲ__Neo__/3k7n/COS/I9301IXCUARA1/I9301ICOSARA1/
Click to expand...
Click to collapse
Thanks

czy jest mozliwosc naprawy ril karta sim nie wyczytuje

SIM card not recognized :crying:

Chomiczek123 said:
czy jest mozliwosc naprawy ril karta sim nie wyczytuje
Click to expand...
Click to collapse
daniiel said:
SIM card not recognized :crying:
Click to expand...
Click to collapse
I'd remind you to have the latest kitkat bootloader and modem installed first. If you're using an outed bl&modem then you'll encounter issues with your SIM. If you're sure you have the latest one installed already then please provide more information about your devices e.g. device model, baseband version etc. and a proper logcat else I can't help you.

prototype74 said:
I'd remind you to have the latest kitkat bootloader and modem installed first. If you're using an outed bl&modem then you'll encounter issues with your SIM. If you're sure you have the latest one installed already then please provide more information about your devices e.g. device model, baseband version etc. and a proper logcat else I can't help you.
Click to expand...
Click to collapse
I'm currently using Lineage OS 16 ROM, Because the SIM card didn't work in this Rom, but my Baseband Version (in LineageOS16) is: I9300IXXUBPF2, my device model is I9300i (s3ve3gds)

This ROM is so good! Anyone has to say thank you for this I guess! It looks exactly like GraceUX from my old A3 2017 (NOSTALGIA)!
But will you ever release a rom based on 7.0? I mean TW Based Roms only base on 6.0.1 or 5.1.1 for the S3 Neo. Why is nobody releasing one based on 7.0?

Does it work with grand 2 like noble rom?

Related

[ROM][8.0][TW][J730X]PrometheusLite A8+ Port V4.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Prometheus ROM For Galaxy J7 2017
ONLY FOR J730X​
Some information you should know..
This is a full A8+ 2018 port with android version 8.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
You are not allowed to use this base, if you want to make rom, "DIY"
Any sort of File Kanging will be reported without hesitation, we know our codes.
If you like this rom and appreciate my efforts, Hit the Thanks button, and consider a donation
i want to bring you this optimized clean oreo experience to your devices. This is my daily driver over the PrometheusS9 Port as its much more suitable for our phones. and since alot of people like a light firmware instead of flagship ones, we have this rom.
Shame on samsung, we have been using Oreo for more than 5 6 months now unofficially (at august 2018) and no sight of official update.
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
​
Fully ported A8+ ROM A730FXXU2BRG5
Android 8.0
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Battery and performance better than stock
Full Samsung experience 9.0 without missing vital apps
Rooted with Magisk
And many more
Extra Features :-
AlwaysOn Display(J7 Only)
All the original features are present (Wifi,Bluetooth etc)
BluelightFilter
GoogleFaceunlock with autoswipe
S9 wallpaper set
BixbyVision
S9 Camera UI
DolbyAtmos
Heavly optimised for J5 J7 variants with their own seperate configrations
Many prop and feature tweaks
Adjusted the framework for 16:9 Aspect ratio (instead of buggy 18.5:9)
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
S9+ OMC With support to more than 60 Countries
VoLTE Support for INS users and countries that use it
Uptodate APN Configration
Added navbar selection (Aroma)
NativeBlur (Aroma)
Heavly Debloated with a BLOAT add-ons (Aroma)
Added exclusive samsung apps (Aroma)
GrxTouchWiz V8 (Aroma)
Dualsound and BoostedAudio configs (Aroma)
S9 infinity wallpapers (Aroma)
1700+ Fonts MOD (Aroma)
Oreo Edge Panels
BixbyHome
Exclusive samsung apps
Ssecure/Secure Wifi etc
Official status in settings
Native AppLock
Wifi S-Secure
Native Screen Videorecorder
Native Call recorder
Sprotect
Many prop tweaks
Many feature tweaks
And many more additions from Refined 7.1.1
Check the changelogs for the FULL feature set
Kernel :-
HeliosPro Kernel for J5/J7 Pro
- Basic Kernel to Boot Oreo on exy7870
- Support for deodexed Oreo systems
- Samsung Security Disabled
- J7 AOD improvments
- Disabled more knox and logging
- Knox 0X0
- Bootstate Green for safteynet
- Patched some props for safteynet
- Reduced GMS Wakelocks
- Init.D Support
- J5 Pro 3GB Variants support (J530Y/YM/FM/GM)
- Other minor improvments
- Full details in Helios Thread
and many more goodies
ensure you have LATEST TWRP from Here
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
Be careful, setup wizard will ask you to CANCEL/REBOOT for SIM installation, PRESS REBOOT and let the phone do its thing, if you did not install an OMC rom before you must do this, otherwise your sim wont work well. its necessary to have many countries properly supported, if you skiped this you will be asked agian but it wont do the right thing and will just be stuck[/B][/COLOR]
Setup your rom and READ the F.A.Q for more information.
Manual VPN might not work. so use openVPN
Imgur Album with ALL photos : (Substratum themed with pitchblack/SwiftDark) imgur
IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@corsicanu
@BlackMesa123
@kill-switch
@mohitmallick17
@topjohnwu for for magisk
@RickyBush_ For IOS Emojis
@Grouxho for Modded Samsung Video recorder
@Josete_1971 for GRX Touchwiz
And the rest of EliteTeam
Testers :
@LuanTeles
@razkal1
@corsicanu
@djedjy
@Cakzemprongzzz
@alex61194
@Dyeide
@alex61194
@renoxtv
And few more that didn't give me their usernames
Downloads. Changelogs , F.A.Qs below​
XDA:DevDB Information
Prometheus LIte, ROM for the Samsung Galaxy J7 (2017)
Contributors
ananjaser1211, corsicanu, blackmesa123
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest bootloader and modem
Based On: TouchWiz
Version Information
Status: Stable
Current Stable Version: V4.1
Stable Release Date: 2019-02-08
Created 2018-06-30
Last Updated 2019-02-08
NewsChannel : Telegram
Come hang with us on our chat : Telegram
----------------------------------------------------------------
PrometheusLite V4.1 Based on A8+ 2018 [LATEST]
AFH : Download
Mega : Download
Google Drive : Download
MyEmoji : Download
Release Post : XDA
---------------------OLD------------------------------
PrometheusLite V3.0 Based on A8+ 2018
AFH : Download
Mirrors
Mega : Download
Google Drive : Download
Thanks @Kill-Switch
Release Post : XDA
---------------------OLD------------------------------
PrometheusLite V2.5 Based on A8+ 2018
GoogleDrive : Download
AFH : Download
If dirtyFlashing from 2.0 , Dont untick Chrome in debloat menu
---------------------OLD------------------------------
PrometheusLite V2.0 Based on A8+ 2018
Downoad : GoogleDrive
Patch V2.1 : Post
---------------------OLD------------------------------
S9+ PORT V1.0
Download/Changelog : POST
----------------------------------------------------------------
V1.5
AFH : Download
GoogleDrive : Download
Clean flash is very recommended
----------------------------------------------------------------
Initial release, V1.0
AFH : Download
Google Drive : Download
----------------------------------------------------------------
V4.1
v4.1 - 8.02.2019
- Updated systemUIs to previous ones
- Dual Sim in notification
- Removed dualsim option in aroma
- Google faceunlock without swipe
v4.0 - 01.2019
- Updated camera apps from latest N8/A7 2018
- Added AR Emoji
- Added ringtones from A5 2017, A7 2018, A8 2018
- Added HeliosPro Kernel v2.6
- Updated Goodlock apps to latest available
- Added option for Sim select menu shown/hidden in QuickPanel
- Rewrote Sound mods in a more cleaner way - new Aroma options
- Added fonts from Japanese firmwares
- Added Pie OneUI emoji
- Reworked camera features and removed useless/broken ones
- Removed some broken features
- Switched to hadesRom ODM and removed CSC
- for proper applying SIM csc reboot 2-3 times
- Added hadesRom custom csc with less but working features
- Removed root options because of the current issues
<b>- first boot unrooted, flash root after first complete boot</b>
- Aroma tuneup
- rearranged some options (read carefully what you select)
- splitted some features for better integration
- update logo
- update scripts
- Maybe more, will probably update later with further progress...
Kernel
- HeliosPro V2.6
- J5 Removed 70HZ mod so fake displays can work
- Compiled with Linaro 6.1.1 Compiler
- Performance and battery greatly improved with new compiler
- Fixed custom ramdisk scripts
- Deodex Supported well with magisk
- GMS Blocker
- 99Killer service (kills gms in idle for better sleep)
- NFC Should work now
- More precise cpu voltage
Old changelogs
This is the Final update for this ROM, after this it goes EOL.
Please dont report bugs if the purpose is getting them fixed, as i wont be pushing any more updates
Facebook external Fix has been removed as it broke other functionality
Thanks again to @corsicanu for working on this project with me from the get go
V3.0
Fix Aroma Audio mods (dual/boosted/dolbyaf)
Fix AOD Brightness Control
ReWrote brightness values to behave more like stock again
Update to Magisk 17.2
Fix a SafteyNet issue that prevents banking apps from working
Switch back to GoogleDNS as few had connection issues
Added Infinity Wallpapers Thanks 4pda @igor19780204
- Changing wallpaper style requires a clean flash !
Updated and Added TasksChanger/LockStar/ClockFace goodlock app
Force Video recording tile
Added back GoogleChrome to the system to prevent FCs
Kernel
- HeliosPro V2.5
- Updated drivers to latest J530F 8.1 Source
- Adoptable Storage (not tested)
-Encryption support (only on stock roms)
- Improvements to GPU CPU Over clocking Thanks @renoxtv
- Ensure you have LATEST TWRP otherwise you wont be able to read Internal storage in TWRP
- Removed 160mhz GPU as it didnt work and caused issues
- Fixed CPU Undervolting (overvolting doesnt work well)
- some other minor improvments to pretty much everything
Bugs
- Manual VPN will return unsuccessful
- If you are unable to change ClockFaces, Uninstall updates to AlwaysOnDisplay
PrometheusLite V2.5
Stock Drivers and libs from J530F 8.1 Update
Oreo NFC Driver and firmware
Oreo WiFI/BT Driver
Updated Camera Libs
Updated audiomixer and HAL
Updated HeliosLite Kernel
Restored Old oreo keyboard
- This fixes language downloads
Gametools fix
- Thanks bryansalcedo14/ezer90
Photo editor fix included
Updated sensor and power libs
3rdparty audio calling apps work well now
greatly Improved Rom performace/battery
Added GoogleWebView
- Chrome is in debloat menu
Added Oreo/Nougat style camera
- Choose in aroma
S9 AlwaysOn Display with brightness control
HeliosPro Kernel for J5/J7 Pro
- Included HeliosPro Kernel for J5/J7
- Full custom control
- Use with EliteTuner app
- GPU Control is limited at this point
- J5 variant runs at 70HZ Refreshrate
- Fullchangelog in dedicated thread
- New J530Y kernel
V2.0
Updated Device Support List
- Support for 3GB Variants of J5 2017
- Test kernel for 3GB variants
Allowed Rom to be installed on all variants
- J530S/L/K
- J530Y/YM/FM/GM [EXPIRMENTAL]
- And All J5/J7 Variants
Fixed Bluetooth connectivity/range issues
Fixed FMRadio
Added NativeBlur
- Enable/Disable in aroma
Fixed RebootIssues
HapticFeedback enabled
- status bar notification expanding, long press of home page in launcher, long press on QS toggles, power button long press
Reworked Audio from scratch
- Improvments to Speaker/Mic Audio and input
- Internetcalls audio should be ok just dont set it at max vol (read notes)
ReWritten Brightness Values
- StockValues should have better outdoor brightness
Updated GoogleApps to August 2018 (openGapps)
- Less Size and optimized for 32BIT
Added GoogleFaceunlock
- Found in SmartLock
- Much faster and better than Samsungs
- Modded to AutoUnlock without Swipe
Optimized Base even more
Added Some Mods
- Allowed Fingerprint unlock after reboot.
- Removed HighVolume Warning.
- Removed High Brightness Warning.
- Removed DualSim notification.
Magisk 16.6
- Fixed MAGISK Manager not showing up
Fully Disabled Signature Verification
GameTools fixed
Propper AOD + smart AOD features
- Only for J7 Variants
DolbySpeaker Mod
- Check in aroma
Added goodlock
-With BadLOCK app
Added Black/White boot anim
- Check in AROMA
Removed USB Connection confirmation popup
Cell standbyDrain fixed
latest July security patch
SmartDailer/AntiSpam in calls
- Check CSC in AROMA
Added ZTO OMC
Debloated much more
Reworked parts of aroma/feature installing
More NFC/AndroidBeam Fixing
- Might work with cards
Improvments to GPS
Updated Aroma Theme (Thanks @corsicanu)
Many fixes in the system
SmartCapture
ScrollCapture
And many more A8 Base features
Helios Kernel for J5/J7 Pro
- Basic Kernel to Boot Oreo on exy7870
- Support for deodexed Oreo systems
- Samsung Security Disabled
- J7 AOD improvments
- Disabled more knox and logging
- Knox 0X0
- Bootstate Green for safteynet
- Patched some props for safteynet
- Reduced GMS Wakelocks
- Init.D Support
- J5 Pro 3GB Variants support (J530Y/YM/FM/GM) [EXPERIMENTAL]
- Other minor improvments
V1.5 :-
1-Fix adaptSound
2-Updated OMC so no more call issues with some countries
3-Updated feature list and added vision improvments
4-Fixed APPLOCK FC when using pattern
5-Updated brightness values to propper ones
6-Updated system overlays
7-Bluetooth calling issue should now be resolved
8-Updated upday app as it was FCing
9-Removed google/samsung auto apps install at first boot
10-Added Brazil OMC (ZTO)
11-Updated feature lists and props
12-Added many Camera mods
13-Added socialCamera
14-Debloated more stuff
15-Added more init.d scripts
16-Added ROOT options in aroma (Magisk/Superu/NoRoot)
17-Bixby now shows in stock launcher
18-Fixed AudioBoost/DualSound installation
19-Add SClean/SPowerplanning in Aroma/Bloat
20-Added SamsungCallBlocker
21-LTE Only Mode
22-Fixed SpowerPlanning
23-Circular Google widget on stock launcher
24-Updated stock launcher to latest version
25-Bunch of other stuff i dont have in mind now
V1.0
-initial release
Good idea to read this F.A.Q While the rom is installing
NOTES :
For Facebook/whatsapp calling, if the audio is quite you should set the call volume to 1 step below max
For The full hapticfeebdback experience, settings>sounds>enable vibration feedback
- Download VibeOnKey and googlekeyboard for the rest of the haptics
SamsungFaceunlock is removed from the ROM, use google smartlock instead
- If you still want to use it for some reason, you have the chance at setup wizard to register your face
For the most optimal feature set, Pick CSC instead of OMC
- In some countries OMC can lose feature sets
If faceunlock is not working be sure to disable Figerprints+Fingerprint gesture
If you pick OMC be sure to select the RIGHT slection for simcard question at setup wizard
- Failure in doing that will keep the the popup and no simcard will work
- You can Pick CSC to avoid this or read the thread instructions
The DolbySpeaker Mod is experimental and EXTREAMLY LOUD so be careful with it
- If you want normal sound boosting, just pick the standalone soundbooster instead
Q : BixbyVision has weird stretch
A : Update the app in GalaxyApps
Q : I dont have root help plez
A : Install magisk app if its gone
Q : Phone took alot of time to boot, and is very laggy
A : pay attention to install steps and reboot
Q : There is SIM popup that keeps coming to ask me for restart
A : you DID NOT follow the instructions, Reinstall the rom and pay attention
Q : in the first SIM question in setup wizard, language is not english, what does it say
A : The RIGHT button is what you need to press, it will factory reset the phone (not touching your internal) and setup your /EFS with an OMC file that is linked to your simcard, so the rom will auto detect your CSC just like official samsung phones
Q : I dont see any EDGE panels after installing
A : Reboot the phone
Q : Where is edge lighting ?
A : This is NOT a flagship port, so the edge panel support is added manually, and LIGHT support cant be added
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations
Q : What to do after the rom is setup ?
A : Go to samsung apps, let the phone update everthing
Q : My phone does NOT boot help pls
A : Ensure you have LATEST AF bootloader and modem installed, did all the wipes, and did your house chores,
re3
Very very thnx u anan sir 1st best oreo rom for j7
Nice one @ananjaser1211 ?
Keep on doing Your great work!
Nice one @ananjaser1211 ?
Keep on doing Your great work!
The touch screen doesn't work... What could it be?
wjesus.221 said:
The touch screen doesn't work... What could it be?
Click to expand...
Click to collapse
Try rebooting ? this is the first time i hear about such issue caused by a ROM, especially a tested one
What about NC?
Now it's OK.
Sim card all time ask restare phone
Perfect. Tank you
COOL
Please add infinity wallpaper like note 8 port rom
Best Rom
Can't use GPS
J730G
i know one day you make our device more better..Thanks fpr your work..:good:
GiaHuy324 said:
Please add infinity wallpaper like note 8 port rom
Click to expand...
Click to collapse
Will be in the S9+ port.
Nguyễn Duy Linh said:
Can't use GPS
J730G
Click to expand...
Click to collapse
Logcat. GPS is working fine on J530F/J730F/G so far
chichareal said:
Sim card all time ask restare phone
Click to expand...
Click to collapse
Read the instructions again
Not a single bug that i have encountered so far. Kudos to the developer and all the hard work he has put into developing this awesome rom
but the thing is that selfie camera seems to be laggy in comparison to the stock rom .
ananjaser1211 said:
Try rebooting ? this is the first time i hear about such issue caused by a ROM, especially a tested one
Click to expand...
Click to collapse
I did a lot of reboot already, still doesn't work... The same happened with the other rom 8.0 finomenal Oreo, but 7.0 nougat is doing fine.

[ROM][9.0][TW][J730X]PrometheusOneUI V2.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Prometheus OneUI Rom For Galaxy J5/J7 2017
ONLY FOR J530X/J730X​
Some information you should know..
This is a full Samsung OneUI port with android version 9.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
[FOR DEVS] If you want to use this as a base for other exynos7870 Phones. Please ask first, and provide proper credits and links to the original thread.
Any sort of File Kanging will be reported without hesitation.
So, First we brought you the First Oreo based ROM. and now its Android Pie. Due to the nature of this release, and the fact that it comes before any Exynos7870 Official Android Pie. there might be
some bugs that me and testers could not have found yet. so please report them. Some bugs will be listed below and most of them would be unfixable until official is out for more 7870 Phones
The J5/J7 OneUI official update is still around 4+ months away, so this rom should keep you guys busy.
I have also included pretty much all the features of previous Prometheus ROMs, but some are impossible due to Pie specific issues (Deodexing is not possible without great problems)
As the nature of these ports go, it was a non stop battle for almost 3 weeks straight to get it to this point where all features are working as expected. if you appreacite this work Hit the Thanks button, and consider a donation
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
​
Fully based on latest stable A600FN Pie
Android 9.0
Samsung OneUI V1.1 Features
Semi-Deodexed
Full DualSIM Support
SafteyNet CTS Pass
Heavily debloated
Zipaligned
Very Optimised
Battery and performance focused
Full Samsung OneUI without missing vital apps
Rootable with Magisk
RMM/KnoxGuard/Defex Free
And many more
Extra Features :-
AlwaysOn Display(J7 Only)
All the original features are present (Wifi,Bluetooth etc)
BluelightFilter
S10 Wallpapers and multiWallpaper pack
BixbyVision
Latest Camera UI
DolbyAtmos With DualSpeaker mods
Heavly optimised for J5 J7 variants with their own seperate configrations
Adjusted the framework for 16:9 Aspect ratio (instead of buggy 18.5:9)
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
Note 8 modded OMC with Additional Features
VoLTE Support for INS users and countries that use it
Uptodate APN Configration
Added navbar selection (Aroma)
Heavly Debloated with a BLOAT add-ons (Aroma)
Added exclusive samsung apps (Aroma)
Dualsound and BoostedAudio configs (Aroma)
1700+ Fonts MOD (Aroma)
IOS 12 / Android Pie Emojis (Aroma)
GoodLock 2019 Suite (Aroma)
AdAway (Aroma)
BixbyHome And Bixby Routines
Full Pie YUVA Suite (SecureWifi, AppLock, Call Blocker and so on)
Native Screen Videorecorder
Native Call recorder
Nav bar mods in aroma
Many prop tweaks
Many feature tweaks
And many more additions from My previous ROMs
Check the changelogs for the FULL feature set
Kernel :-
Helios Pie Kernel V3.0
- Fully featured Kernel
- Overclocking and custom governors
- Latest Drivers and R28 GPU Driver
- Samsung Security Disabled
- Disabled more knox and useless logging
- FakeKnox
- Bootstate Green for safteynet
- Patched some props for safteynet
- Reduced GMS Wakelocks
- Init.D Support
- All J5/J7 Variants support
- And many more improvments
and many more goodies
ensure you have LATEST TWRP from Here
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
After the boot animation is on for 15~20 Seconds. Hold VolumeDown+power until the device reboots[/COLOR]
Setup your rom and READ the F.A.Q for more information.
To Root, Flash the latest Magisk Canary Build after a successful Boot
Manual VPN might not work. Use OpenVPN instead
FM Radio (For now unclear why its not working)
Imgur Album with ALL photos : IMGUR Album
IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@corsicanu for always working with me on my projects, And many features
@kill-switch For ideas for extra Localization
 @mohitmallick17 For debugging on his J710
 @LuanTeles For help with feature and csc features
@gyogubin (kousagood) for A600N Beta Dump
@topjohnwu for for magisk
@RickyBush_ For Emojis
And the rest of EliteTeam
Testers :
 @LuanTeles
@ion1s
@corsicanu
@djedjy
@Dyeide
 @vsmhell
@fetaiharbin
And few more that didn't give me their usernames
Downloads. Changelogs , F.A.Qs below​
XDA:DevDB Information
PrometheusOneUI, ROM for the Samsung Galaxy J7 (2017)
Contributors
ananjaser1211, corsicanu
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader and modem
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: V2.0
Stable Release Date: 2019-03-22
Created 2019-03-22
Last Updated 2019-04-12
Downloads and changelogs
NewsChannel : Telegram
Come hang with us on our chat : Telegram
----------------------------------------------------------------
PrometheusOneUI V3.0 UNFINISHED [LATEST]
Download : Here
PrometheusOneUI V2.0 Based on Stable A600FN
AFH : Download
Mega : Download
Google Drive : Download
Size : 1.7GB
MD5 : 280058bac34b689383cc2a57d3a47e25
----------------------------------------------------------------
PrometheusOneUI V1.0 Based on A600N/A105FN
AFH : Download
Mega : Download
Google Drive : Download
Size : 1.6GB
MD5 : dd1a14c2241623378d064045055688e7
V2.0
- Rebased to Official OneUI A600FNXXU3BSC5
- Fixed Goodlock issues when installing from aroma and updated them
- Updated all apps to latest stable ones
- Fixed many under the hood issues that caused instability
- Updated Audio HW fully to stable Pie
- Fixed GameTools for nonNavbar
- Fixed Video res options in samsung camera
- More RMM stuff removed
- S10 MultiWallpapers
- S10 Wallpapers
- NavBar or Gestures only mod added
- Enabled back AutoPreConfig (To install missing apps automatically)
- Dolby Fixed
- Google Faceunlock
- Samsung FaceUnlock (Disable FingerPrints and FP gestures to use)
- Fix a problem that caused AOD to crash at times and require a hard reboot
- Fix an issue that caused "CLIPBOARD" dialouge to show up everytime the keyboard is up
Kernel
- Helios Pie V3.0
- Imported every good thing from Helios 2.7
- Overclocking support
- Custom governors
- And much more
V1.0
-initial release
Good idea to read this F.A.Q While the rom is installing
NOTES :
Q : How to use SamsungFaceunlock
A : Turn off Fingerprints and FP Gestures
Q : How to turn on AOD ?
A : Change AOD from TAPAOD to ALWAYS SHOW
Q : I dont have status bar icons / Rom is Laggy / task changer is laggy / Goodluck doesnt open
A : Do not install Goodlock. it is causing issues
- Reflash the rom without goodlock option, and wipe cache
- If problem presists, clean flash
Q : Can i use flashlight in 3rd party apps ?
A : No, Samsung restricted Flashlight API to stock camera since Android 8.0
Q : SDCard unreadable
A : A reboot might fix it, if not , have to reformat to exFAT
Q : Can we get EdgePanels, Lighting , Native Blur etc
A : We cant deodex and add features like before due to a general bug with Pie
Q : How to Root ?
A : Flash the latest Magisk CANARY Build
Q : Stuck at boot animation
A : You have to reboot atleast once manually
Q : I dont get VoLTE, Why ?
A : Either Reinstall or
- Go to settings > About Phone
- See what OMC is used (DBT/DBT , XSG/XSG for example)
- copy system/omc/INS contents to system/omc/[The used OMC in about Phone]
- Reboot
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations and new Operating system
Q : What to do after the rom is setup ?
A : Go to samsung apps and google store, let the phone update everthing
Q : the phone wont install any apps
A : Reboot
Q : What bootloader and modem do i need ?
A : Latest Oreo Bootloader is a must, the rom will boot on Nougat BL but will have many bugs related to lockscreen and GPS
Q : How do i know what Bootloader i have ?
A : Samsung info App. if it says AXXX its Nougat. BXXX its Oreo
Q : How do i Update my Bootloader and modem ?
A : Flash latest stock rom (if N BL) and re-oem unlock (follow miracle box method). if on O BL, just flash BL/CP
Q : Some apps do not have my language. Why ?
A : This rom is initially based on Korean Dump. report the app that does not have translation
Q : Tap on AOD does not work , Why ?
A : A bug from Samsung Side
Q : Everytime i press a textbox it shows clipboard dialouge
A : Another Samsung bug that only can be fixed by a base update
Q : Why Antutu UX score is low ?
A : I dont know excatly why it dropped with OneUI, while GPU CPU and RAM increased
Q : Why AOD doesnt work on J5 ?
A : Not possible at the moment due to hardware incompatibility
Q : no RIL or FCs
A : Reinstall and be sure to wipe data/cache/dalvik/system manually
Three
One more for good luck . Enjoy
gg
Wowow, downloading ...
????? Keep it up dude !
Toppppp dev tnks
You are the best ?
Love you <3
Love the ROM, tried it, extremely laggy however. Will keep an eye on it, hope for the best in the upcoming versions in order for it to be as optimized and stable as the Oreo ROM. Keep up the good work!
first bug does not show mobile network icon, wifi
Iguzmand said:
first bug does not show mobile network icon, wifi
Click to expand...
Click to collapse
Reflash without GoodLock, it's bug related.
You did so much.
always the fast and best ??
(I got this on Prometheus v4 wtf ???)
Akihikoryusuke said:
Love the ROM, tried it, extremely laggy however. Will keep an eye on it, hope for the best in the upcoming versions in order for it to be as optimized and stable as the Oreo ROM. Keep up the good work!
Click to expand...
Click to collapse
Any more information about how and where its laggy?. This is the stock OneUI experience for 7870. Meaning it won't get better as this is how the stock versions will be when they release.
In fact
I can only thank you for your effort.
It's nice to be trying to help others for nothing.
Everyone who owns this phone should thank you for the fingerprint you leave.
I was a programmer before.
On the Symbian system of the Nokia
And I know the feeling of happiness when you serve others for free
Actually, I'm a lucky person because I had a note 4 and I was very happy with your constant attempts to develop that phone.
And now I'm happier because you have j7
I'm going to enjoy your experience and your efforts.
Accept my high respect my dear brother​
thanks bose
Re inserted and formatted the sd card and it is now working well.
Joviandom said:
Very beautiful and awsome rom. Thanks to the amazing developer. I am facing just one issue, I can't access my 64 GB samsung evo+ sd card. It says to format the card and i did but still it doesn't appear in the storage. I can only see the internal. Hope to get a solution soon. Thanks for the rom.
Click to expand...
Click to collapse
Same here
Also...magisk faild to install any modules
Titanium backup can not write on sd card
Any fix for this??

[ROM] [Q 10.0] [ONEUI 2.5] AMBASADII ROM FOR S10e/S10/S10+ [STABLE] [ODEX] [DTK9] [v2.2] [FINAL]

Welcome to Ambasadii ROM for S10 series
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
# This ROM is made for: S10e (SM-G970F) , S10 (SM-G973F) , S10+ (SM-G975F) models !
# Flash it at your own Risk!
# Your warranty is VOID Knox flags 0x1
# I'm not responsible for damage to equipment or loss of warranty!
** ABOUT ROM **
● Stock odex version based on latest 10.0 Q G975FXXS9DTK9 OneUI 2.5 firmware
● Security patch level: 2020-12-01
● Changelist: 20034833
● Knox and FOTA removed!
● Support models: SM-G970F , SM-G973F , SM-G975F Only!
● Ambasadii Cruel Kernel for S10e/S10/S10+
● RMM state lock fix included
● Bluetooth pairing and connection fix included
● Hidden OEM unlock in developer settings for your safety
● Device status official in settings
● Auto backup EFS partition to your internal storage for your safety
● Build.prop tweaks for better battery and performance
● Support wifi calling and volte
● Enable applock into advanced features
● Enable extra toggles like: capture screen , volte
● Many CSC features enabled like: call recording, network speedmeter,receive MMS without mobile data on,and many more...
** AROMA OPTIONS **
● Options to choose wipe method:
* Full wipe
* Dirty wipe
● Addons Options:
* LTE Icon (enable LTE mobile data icon instead off 4G)
* Data Usage (enable data usage information under brightness slider)
* NFC Icon (enable NFC icon on statusbar when its enabled)
* Netspeed (enable samsung network icon on statusbar)
* Call Recording (enable call recording during call)
* Force Connect MMS (enable receive mms without mobile data on)
● Safe debloat option - choose apps to remove:
* Google Search
* Samsung Gear VR support
* Samsung Game Tools
* Samsung Bixby Home/Wakeup
* Samsung Bixby Vision
* Samsung Bixby Routines
* Samsung Digital Wellbeing
* Flipboard Briefing/Upday
* Samsung AR Emoji
* Samsung Dex
* Samsung Kids Home
* Smart Reminder
* Samsung Magnifier
* Connect To Windows
● 87 csc regions select in aroma installer:
ACR , AFG , AFR , ATO , AUT , BGL , BNG , BRI , BTC , BTU , CAC , CAM , CAU , CHO , COO , CPW , DBT , DKR , DOO
ECT , EGY , EMP , EON , EUR , GLB , GTO , ILO , INS , ITV , KSA , LAO , LUX , LYS , MAT , MID , MM1 , MWD , MXO
NEE , NPL , ORX , PAK , PEO , PHE , PHN , ROM , SEB , SEE , SEK , SER , SIO , SIN , SKZ , SLK , SMA , SMP , STH
THR , TKD , TPA , TPH , TTT , TUN , TUR , XEF , XEH , XEO , XEU , XFA , XFE , XFV , XME , XSG , XSP , XTC , XXV
TEL , VAU , OPS , NZC , TNZ , VNZ , XSA , XNZ , XEZ
** ROM CONTROL MODS **
Basic mods:
● rom control toggle
● multi action toggle (reboot to recovery and more...)
● screen time off time toggle
● outdoor mode toggle
● disable high volume warning dialog with headphones
Rom control mods:
● full control for statusbar ,notification panel and lockscreen icons (move and hide)
● single or dual statusbar on fly
● custom padding for statusbar
● custom bg image for dual statusbar
● custom clock on statusbar
● date on statusbar
● 3minit battery on statusbar
● grx circular battery on statusbar
● network traffic on statusbar
● custom carrier label on statusbar
● wifi icon chooser on statusbar
● signal icon chooser on statusbar
● alarm icon chooser on statusbar
● signal data icon switch (4G or LTE)
● weather temperature on statusbar and lockscreen
● weather icon on statusbar and lockscreen
● data usage preference on notification panel
● quicklaunch on notification panel
● device info on notification panel
● ram swap info on notification panel
● quick settings tile number in portrait and landscape mode
● allow quick reply on lockscreen
● statusbar and lockscreen icons colors
● notification panel custom colors
● navigation bar custom colors
● power menu custom background
● notification panel custom background
● samsung incallui custom background
● microsd/sim2 tray lock bypass
● long press back to kill
● force dark mode in 3th apps
● screenshots in secured screens
● volume skip tracks
● animation scale
● inmmersive mode
● outdoor mode
● charging sounds
** CUSTOM KERNEL **
● Ambasadii Cruel Kernel is based 100% on cruel kernel source
● Basic info about kernel:
* Samsung kernel source = DTJA
* OS Patch Date = 2020-11
* Toolchain = standard samsung (clang6/gcc4.9)
* Magisk version = v21.2
* Adds iptables filters for altering ttl values of network packets
* Adds CIFS (SMB) support
* Enable boeffla wakelock blocker module
* Enable moro sound control module
* Remove debugging information from the kernel
* Disable vendor check of DP cables in DEX mode and always use WQHD resolution
* Disable kernel auditing subsystem
* Disable kernel samepage merging (KSM)
* Disable swapping
* Disable nozram
* Use defconfig for /proc/config.gz
● Download latest kernel: AmbasadiiCruel-G97xF-v3.10.zip
** BOOTLOADER/MODEM UPDATE **
● Download latest BL/CP: For ODIN (SM-G970F/SM-G973F/SM-G975F)
** TWRP **
● Download latest TWRP: TWRP for Galaxy S10/e/+/5G Exynos
** TIPS **
● Knox related features such as secure folder, secure wifi, samsung pay or samsung pass may not work any longer after rooting your phone!
● Rom not included bootlader and modem flashing (if you want update them to latest flash it via odin)
● Don't update magisk from magisk manager (magisk is included into pre-rooted custom kernel and can't be updated via magisk manager!)
** CHANGELOG **
● v2.2
- based on G975FXXS9DTK9 android 10.0 firmware OneUI 2.5
- security patch: 2020-12-01
- changelog: 20034833
- support S10e/S10/S10+ model!
- ambasadiicruel kernel v3.9-rc1 for S10e/S10/S10+
- pre-rooted with magisk v21.1
- update magisk manager v8.0.3
- update CSC to OXM9DTJB
** HOW TO INSTALL **
● If you come from stock firmware first flash TWRP
● Make a wipe data , cache , dalvik-cache
● Flash rom zip
● Flash mods zip (not obligatory)
● Reboot phone and wait about 8 min
** BUGS **
● secure folder removed becasue not work since DTJA base
** DONATION **
http://paypal.me/ambasadii
** DOWNLOAD ROM **
v2.2 afh
mods_DTJA-v1.3.4. zip
** SOURCES **
● Rom Control Source: https://github.com/ambasadii/GrxSettingsV2
● Kernel Source: https://github.com/CruelKernel/samsung-exynos9820
** TELEGRAM **
Join my telegram news channel for news about Ambasadii ROM 's -
Join my telegram group for support to Ambasadii ROM's -
** CREDITS **
SuperR - for kitchen
topjohnwu - for magisk root
Osmosis - for busybox and some other script
corsicanu - for some fix and help
evdenis - for custom kernel
geiti94 - for custom kernel, twrp and help
Grouxho - for help and some mods
AbrahamGC - for help and some mods
Arteush & Dr.Ketan - for fix bluetooth pairings after reboot
sanoc69 - for help and some mods
thereassaad - for help and some mods
Edzamber - for help and some mods
alexndr_xda - for help
Repulsa - for help
Morogoku - for mtweaks app
khongloi113 - for secure folder fix​
Best rom ever. Installing right now
Installing right now, thanks in advance !
One of best rom devs , now on S10 series <3
Can you please make support for S10e?
ExtremeGrief said:
Can you please make support for S10e?
Click to expand...
Click to collapse
+1 for this.... Please
awesome rom thanks one problem moro sound module not work
Working fine here but only with headphones
hello, ambasadii
I saw that you make ROM from Samsung s10 and s10+. So my question is can you made it for Samsung s10e ( SM-G970F) ?
I always use your ROMs and I'm happy with them i use to had too many phones and always use your Rom. I will be happy if we can figure it something for this phone too.
Regards, Ahmed
Oh, Ambasadii for the S10 + [emoji16]
It reminds me of days gone by with your ROM...
It's great that you are here [emoji106][emoji41]
Gesendet von meinem SM-G975F mit Tapatalk
Pls bro add support for s10e they are the same hardware
hello, ambasadii
I saw that you make ROM from Samsung s10 and s10+. So my question is can you made it for Samsung s10e ( SM-G970F) ?
I always use your ROMs and I'm happy with them i use to had too many phones and always use your Rom. I will be happy if we can figure it something for this phone too.
Regards, Ahmed
+1 for S10e
PS @mods: Having a combined forum for S10/S10+ and S10e while the S10e is different and not as trivial to support is really counterproductive as people will spam the threads...
Must we Flash the BOOTLOADER if we are coming from 9.0 ? / are they flashable via TWRP ( i have no access to a windows machine over the holiday season )
hutzdani said:
Must we Flash the BOOTLOADER if we are coming from 9.0 ? / are they flashable via TWRP ( i have no access to a windows machine over the holiday season )
Click to expand...
Click to collapse
Yes, 10.0 bootloader is mandatory and unfortunately for you there is only odin package available in the OP.
Guys,
Did someone manage to download this Rom?!
I'm having issue downloading here
Sent from my [device_name] using XDA-Developers Legacy app
Reggy Noble said:
Guys,
Did someone manage to download this Rom?!
I'm having issue downloading here
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yeah, everyone interested managed to download it. What's the issue you are facing?
Vatt`ghern said:
Yeah, everyone interested managed to download it. What's the issue you are facing?
Click to expand...
Click to collapse
Since yesterday:
For Mega link: I'm not able to get connected to server.
For Google Drive link: I have an error message stating something like "that the file can not be downloded at the moment because it is being downloaded by too many people"
Sent from my [device_name] using XDA-Developers Legacy app
Open the link with Chrome. Works for me without problems..
Gesendet von meinem SM-G975F mit Tapatalk
Roger.T said:
Open the link with Chrome. Works for me without problems..
Gesendet von meinem SM-G975F mit Tapatalk
Click to expand...
Click to collapse
Thanks,
I had an issue with my Mega account. Don't know why.
I had to do an account reset.
File is now downloaded [emoji6]
Sent from my SM-G973F using
---------- Post added at 05:12 PM ---------- Previous post was at 05:06 PM ----------
Another question guys, before I start the flashing process.
It is recommended to first flash a specific twrp as linked in the OP.
This twrp does not seem to be patched.
Am I going to be able to reboot in recovery without problem after flashing this specific twrp?
Sorry for this question. Just want to be sure to not make mistake before flashing.
Thanks in advance for your reply
Sent from my SM-G973F using
Reggy Noble said:
Thanks,
I had an issue with my Mega account. Don't know why.
I had to do an account reset.
File is now downloaded [emoji6]
Sent from my SM-G973F using
---------- Post added at 05:12 PM ---------- Previous post was at 05:06 PM ----------
Another question guys, before I start the flashing process.
It is recommended to first flash a specific twrp as linked in the OP.
This twrp does not seem to be patched.
Am I going to be able to reboot in recovery without problem after flashing this specific twrp?
Sorry for this question. Just want to be sure to not make mistake before flashing.
Thanks in advance for your reply
Sent from my SM-G973F using
Click to expand...
Click to collapse
The kernel is patched..
You only need to patch TWRP if you are not using the kernel.
Gesendet von meinem SM-G975F mit Tapatalk

[ROM][10] Pixel Experience + [08th Dec' 2020] [FINAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Xperia XZ Premium [Maple]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Known issues
Test and Tell
DON'T FLASH GAPPS, ALREADY INCLUDED
See POST #
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog​
Android OS version: 10.0.0_r35
Security patch level: May 2020
Build author/Device Maintainer: Shujath
Kernel Source: https://github.com/Yoshino-StockDevelopment
Source code: https://github.com/PixelExperience
ROM Developer: Shujath
XDA:DevDB Information
AOSP Pixel Experience for Xperia XZ PRemium, ROM for the Sony Xperia XZ Premium
Contributors
Shujath, modpunk, derf elot
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: 47.2.A.10.107
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1
Created 2020-05-22
Last Updated 2020-05-22
Instructions :
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
Install Latest Firmware
Grab the Sony Stock firmware using e.g. XPeriFrim. You should always flash the firmware matching the LOS build.
Grab newflasher and put it in the same folder as the firmware files.
Read the newflasher original post on XDA for general instructions!
Remove the following from the folder so they won't get flashed:
all *.ta files (keep the one in the boot/ directory)
Turn off your phone
Hold the volume down button and attach it via USB to your system till you see LED turning green
Run newflasher from within this directory to flash the remaining files
Skip the second optional step (dumping of trim area), it's useless if your bootloader is unlocked already and takes a long time.
Hit Yes for all the next questions asked in Newflasher(Only dumpin of trim area should be selected no and rest all questions should be selected as yes.
Once Newflasher flashes the Stock rom, boot into it and make sure volte is available.(VOLTE WILL NOT WORK ON BLISS IF YOU DO NOT HAVE IT IN STOCK ROM.
Incase you are not able to see volte icon in stock either your carrier does not support it or there is an issue with the stock rom(Try flashing it again).
Once you confirm Volte is available in stock, Flash the TWRP recovery and follow below instructions carefully.
Boot into recovery >> Format Data >> Power off the Phone.
Again boot into recovery >> Format Data >> Power off the Phone.
This time boot into recovery >> Wipe Internal Storage.
Flash ROM, Gapps, Magisk.
In the setup wizard select SIM 1 as the default sim for calls data and message.
Once Boot is complete, wait patiently for few mins.
Gto *#*#4363#*#* >> Phone Information >> IMS status.
Voilllaa you should have volte and dual sim both enabled.
Google Apps
Gapps are already included in the ROM and no need to flash it again.
FEATURES AND ISSUES
Code:
- Boot: Ok
- Bluetooth: Ok
- WiFi: Ok
- WiFi Hotspot: Ok
- RIL - Phone - Data: Ok
- VoLTE: Ok
- GPS: Partially OK(Working with carrier network)
- Camera: Ok (SONY Stock Camera)
- Camcorder: Ok (SONY Stock Camera)
- Lights: Ok
- MicroSD: Ok
- Accelerometer: Ok
- Compass: Ok
- Gyroscope: Ok
- QTI sensors: Ok
- Touchscreen: Ok
- FM Radio: NA
- Fingerprint: Ok
- Vibrator: Ok
- Microphone: Ok
- Audio & music: Ok
- Bluetooth audio: Ok
- NFC: Ok(Need Testing)
- Kernel: Ok
- Graphics: Ok
- 3D Rendering: Ok
- Clock: Ok
- Offline Charging: Ok
- USB: Ok
- USB OTG: (Need Testing)
- Encryption: Broken
- Live Display (Profile changing on Reboot)
- SEPolicies: Enforcing
[/SIZE]
Known Issues
Please test and reply
Changelog :
22nd May'2020 : Initial Release.
Added stock cam and sony Music
Bugs :
- Vendor mismatch for Single sim users.
- SIM detection takes upto 3 mins for Dual SIM users.
- Volte not working.
Link : https://www.androidfilehost.com/?w=files&flid=312750
2nd June 2020 :
* Enabled VoLTE
* Dual SIM Fixed
* Vendor Mismatch error at boot fixed.
* Enabled most of the carriers in the world who support VoLTE.
* Kernel up streamed.
* Many other upstream changes from PE.
* Various other bug fixes.
https://www.androidfilehost.com/?fid=4349826312261824101
12th June 2020
Changelog :
* Bumped June's Security Update
* Migrated from Pixel Experience >> Pixel Experience PLUS Edition
* SafetyNet passes out of the box.
Download link : https://www.androidfilehost.com/?fid=8889791610682868582
17th August 2020 :
Changelog :
* Updated thermals for Fast Charging
Managed to get RIL and Volte working wihtout
* Modem Switcher
* Customization Selector
* Modem Customization
* Fixed Random loss of Network on both Single and Dual SIM.
* Fixed Maps Crash, Huge thanks to @rcmiku
* Added Xperia Album thanks to @
* Removed Unncessary volte props causing crashes on the system.
* Satery net still passing out of the box
* Removed unused Symlinks for Adreno.
* Downgraded android.hardware.gnss to 1.0
* Upgraded display vendor vendor.display.config to 1.9
* Added GNSS packages in try to fix offline GPS.
* Added CNE packages for better connectivity.
* Added IWlanService for VoWifi(Still not working)
* Added NXP hal for NFC
* Addressed CND Denails.
* Fixed Android Debugging
- Fixed Stock Camera memory Leak (Thanks to @ )
- Completely disabled Doze which was causing UI crashes
* Unified Device Trees (Device will get props accordingly)
* Fixed data issue on single SIM devices(No need to toggle WiFI)
* Removed Vulkan rendering which was causing Blank screen on various apps.
* Added Sony Stock Movie Creator App
* Removed buggy DT2W
* Added Xperia Email and Xperia Keyboard.
Download Link : https://www.androidfilehost.com/?fid=8889791610682916825
08th Dec'2020
ROM UPDATE : Thanks to @No1Alien for compiling the ROM.
* Compiled with latest source and security patches.
* Kernel Upstream.
Download : https://androidfilehost.com/?fid=10763459528675599243
EOL
Kernel version ?
SilverGamer_YT said:
Kernel version ?
Click to expand...
Click to collapse
4.4.218
Thank you
This is the Pixel Experience or the Pixel Experience Plus edition?
Diego0007 said:
This is the Pixel Experience or the Pixel Experience Plus edition?
Click to expand...
Click to collapse
Read the title
Is dual card normal?
Is the SIM card reading speed normal?
I used the following version before and found that reading the SIM is very slow, more than 5 minutes, and the signal is a bit poor.
https://forum.xda-developers.com/xz-premium/development/rom-pixel-experience-plus-edition-t4088483
sunday01 said:
Is dual card normal?
Is the SIM card reading speed normal?
I used the following version before and found that reading the SIM is very slow, more than 5 minutes, and the signal is a bit poor.
https://forum.xda-developers.com/xz-premium/development/rom-pixel-experience-plus-edition-t4088483
Click to expand...
Click to collapse
True, since I'm using the XZP as first phone, that's essential for me... Didn't try this new ROM yet but signal reception in the rcmiku Pixel Experience one was very poor... Except that, most stuff works fine... But you know, if you have an emergency you can't wait 5 or more minutes for the signal to kick in
Any feedback on SIM card reading in this ROM?
sunday01 said:
Is dual card normal?
Is the SIM card reading speed normal?
I used the following version before and found that reading the SIM is very slow, more than 5 minutes, and the signal is a bit poor.
https://forum.xda-developers.com/xz-premium/development/rom-pixel-experience-plus-edition-t4088483
Click to expand...
Click to collapse
Jujub said:
True, since I'm using the XZP as first phone, that's essential for me... Didn't try this new ROM yet but signal reception in the rcmiku Pixel Experience one was very poor... Except that, most stuff works fine... But you know, if you have an emergency you can't wait 5 or more minutes for the signal to kick in
Any feedback on SIM card reading in this ROM?
Click to expand...
Click to collapse
For Dual sim users its taking about 2-5 mins for sim detection and second sim is not getting detected for.
Till now I have not experienced any network issues, as this uses the same source as Bliss there should not be any issue with signal reception.
Stock camera continued FC
Hi shujath, can you include the " plus edition" i. The future soon..also i have question, is it "okay" if i dont remove any files from the firmware before i fladh it with newflasher?? Because i like to clean flash for my phone..thank you sir for maintaining alot of roms... Damn i cant imagine how difficult it was to maintain the stability and improving the rom at the same time.. thats really alot of time.. but overall good job sir really good work..thank you
I can't install larom, when installing everything in the boot it asks me for a password, help please
Guetto Design said:
I can't install larom, when installing everything in the boot it asks me for a password, help please
Click to expand...
Click to collapse
Format data
Volte not working?
Brilliant work!
Thanks for ur working !!
minuitsun said:
Volte not working?
Click to expand...
Click to collapse
Added volte support to Bliss
Will b adding here later next week
Shujath said:
Added volte support to Bliss
Will b adding here later next week
Click to expand...
Click to collapse
Wow, great!Thank you for your contribution。
Only the dual version (G1842) appears in the download, can it be installed in the normal version (G1841)?

[ROM][10.0] crDroid v6.15 Updated : 11th Feb 2021

<!---This is a forum post template for manitainers to use on XDA, or whatever forum you post your build(s) on. You can copy/paste what is here and edit as necessary for your purposes-->
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
step 1 : Flash Stock ROM
step 2 : Flash Recovery in Fastboot
step 3 : Flash ROM GAPPS and Magis
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/Yoshino-StockDevelopment
Download:
ROM https://crdroid.net/<device codename>
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/10.0/changelog_maple.txt
Known issues:
. Test and Tell
Visit official website @ crDroid.net
Xperia ALL ROMS Group
crDroid Community Telegram
Donate to help our team pay server costs
Contributors
Shujath, modpunk, derf elotROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: Lineage
Version Information
Status: Stable
Stable Release Date: 2020-06-29
Created 2020-06-29
Last Updated 2020-06-29
Instructions :
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
Install Latest Firmware
Grab the Sony Stock firmware using e.g. XPeriFrim. You should always flash the firmware matching the LOS build.
Grab newflasher and put it in the same folder as the firmware files.
Read the newflasher original post on XDA for general instructions!
Remove the following from the folder so they won't get flashed:
all *.ta files (keep the one in the boot/ directory)
Turn off your phone
Hold the volume down button and attach it via USB to your system till you see LED turning green
Run newflasher from within this directory to flash the remaining files
Skip the second optional step (dumping of trim area), it's useless if your bootloader is unlocked already and takes a long time.
Hit Yes for all the next questions asked in Newflasher(Only dumpin of trim area should be selected no and rest all questions should be selected as yes.
Once Newflasher flashes the Stock rom, boot into it and make sure volte is available.(VOLTE WILL NOT WORK ON BLISS IF YOU DO NOT HAVE IT IN STOCK ROM.
Incase you are not able to see volte icon in stock either your carrier does not support it or there is an issue with the stock rom(Try flashing it again).
Once you confirm Volte is available in stock, Flash the TWRP recovery and follow below instructions carefully.
Boot into recovery >> Format Data >> Power off the Phone.
Again boot into recovery >> Format Data >> Power off the Phone.
This time boot into recovery >> Wipe Internal Storage.
Flash ROM, Gapps, Magisk.
In the setup wizard select SIM 1 as the default sim for calls data and message.
Once Boot is complete, wait patiently for few mins.
Go to Settings >> Blissify >> Advanced System Icons >> Set icon for Volte.
Voilllaa you should have volte and dual sim both enabled.
Google Apps
You can download and install the Google Apps from opengapps.org. You need ARM64 and 10.x. I suggest to *always* use the pico or nano package. If you need additional apps you find them in the Play Store.
MicroG
This ROM does support Signature Spoofing. However we are watching MicroG and check if they provide newer builds e.g. for Android Pie.
FEATURES AND ISSUES
Code:
- Boot: Ok
- Bluetooth: Ok
- WiFi: Ok
- WiFi Hotspot: Ok
- RIL - Phone - Data: Ok
- VoLTE: Ok
- GPS: Partially OK(Working with carrier network)
- Camera: Ok (SONY Stock Camera)
- Camcorder: Ok (SONY Stock Camera)
- Lights: Ok
- MicroSD: Ok
- Accelerometer: Ok
- Compass: Ok
- Gyroscope: Ok
- QTI sensors: Ok
- Touchscreen: Ok
- FM Radio: NA
- Fingerprint: Ok
- Vibrator: Ok
- Microphone: Ok
- Audio & music: Ok
- Bluetooth audio: Ok
- NFC: Ok(Need Testing)
- Kernel: Ok
- Graphics: Ok
- 3D Rendering: Ok
- Clock: Ok
- Offline Charging: Ok
- USB: Ok
- USB OTG: (Need Testing)
- Encryption: Broken
- Live Display (Profile changing on Reboot)
- SEPolicies: Enforcing
[/SIZE]
Known Issues
Please test and reply
Download and Changelog:
29th June :
-- Initial Release :
Changelog :
- Enabled strict thermals for quick charging
- Updated display related props
- Fixed randomly loosing of network
- Maps Fixed.
- Many more which I forgot
Download : https://www.androidfilehost.com/?fid=8889791610682881314
09th August 2020
Changelog :
* We are now Official.
* Managed to get RIL and Volte working wihtout
* Modem Switcher
* Customization Selector
* Modem Customization
* Fixed Random loss of Network on both Single and Dual SIM.
* Fixed Maps Crash, Huge thanks to @rcmiku
* Added Xperia Album thanks to @
* Removed Unncessary volte props causing crashes on the system.
* Satery net still passing out of the box
* Enabled Vulkan rendering.
* Removed unused Symlinks for Adreno.
* Downgraded android.hardware.gnss to 1.0
* Upgraded display vendor vendor.display.config to 1.9
* Added GNSS packages in try to fix offline GPS.
* Added CNE packages for better connectivity.
* Added IWlanService for VoWifi(Still not working)
* Added NXP hal for NFC
* Addressed CND Denails.
* Fixed Android Debugging
* Fixed Stock Camera memory Leak
* Unified Device Trees (Device will get props accordingly)
* Fixed data issue on single SIM devices(No need to toggle WiFI)
* Removed Vulkan rendering which was causing Blank screen on various apps.
* Added Sony Stock Movie Creator App
* Removed buggy DT2W
* August Security Patch merged
* Kernel upstreamed to 4.4.232
* GPS Fixed
* Enabled Doze
* Enabled sensor based wakeups(Includes Tilt, handwave, pickup, Pocket).
Download Link : https://sourceforge.net/projects/cr...Android-10.0-20200809-maple-v6.9.zip/download
11th Feb 2021
Changelog :
* January Securty Patch
* 4.4.255 Kernel
* CrDroid code upstream.
* Encryption Fixed(Format Data if you are unable to boot).
Download : https://www.androidfilehost.com/?fid=17248734326145735327
I did try Android 11 and felt Camera quality is degraded, Will stick around to 10 for a while.
woahhhh i will try now sob ???
wowwwwww, thank you so muchh
update, I have tested this rom:
+ gmaps latest version works
+ camera hardware button works(need go to rom settings -> enable camera hardware button )
+ the rom is really smooth, but from my experience, havoc is the most smooth rom
Great work Shujath!!!
duongcuong96 said:
update, I have tested this rom:
+ gmaps latest version works
+ camera hardware button works(need go to rom settings -> enable camera hardware button )
+ the rom is really smooth, but from my experience, havoc is the most smooth rom
Great work Shujath!!!
Click to expand...
Click to collapse
Hello. Is havoc stable? Gmaps is working? How much time to detect sim card?
Thanks.
Dark mode deactivate after reboot.
Led battery bar not working.
It's possible to change "lineage_maple" to for example G8142 o Xperia G8142? Where?
Thanks
Edit. Anyone knows wth happened?
Sent from my Sony lineage_maple using XDA Labs
Where is "smart charging" fuction?
Thank you
zavros said:
Where is "smart charging" fuction?
Thank you
Click to expand...
Click to collapse
Use battery charge limit from playstore.
Sent from my Sony lineage_maple using XDA Labs
Hakkinen3K said:
Hello. Is havoc stable? Gmaps is working? How much time to detect sim card?
Thanks.
Click to expand...
Click to collapse
Hello, havoc is pretty stable, but camera button not working, sim card detect is fast, just like crDroid you are using now, Gmaps latest version did not work yet, but will be fixed soon, since our great Shujath also maintenance havoc too
Hakkinen3K said:
Dark mode deactivate after reboot.
Led battery bar not working.
It's possible to change "lineage_maple" to for example G8142 o Xperia G8142? Where?
Thanks
Edit. Anyone knows wth happened?
Click to expand...
Click to collapse
First of all if no logs provided no bugs detected
Dark mode is working fine after restart and led battery bar too
Did u follow my instructions on how to install the ROM?
duongcuong96 said:
update, I have tested this rom:
+ gmaps latest version works
+ camera hardware button works(need go to rom settings -> enable camera hardware button )
+ the rom is really smooth, but from my experience, havoc is the most smooth rom
Great work Shujath!!!
Click to expand...
Click to collapse
Very much agree, havoc is really smooth
Got a question if anybody can help me, not involve the rom but I don't know...I tried to edit Mixer_paths_tasha.xml for change values for Volume I use mix Explorer text editor, code editor, fx file manager text editor and when I save the values changed but if I reboot the phone the values back to default.
Sent from my Sony lineage_maple using XDA Labs
I installed Bliss on my wife's XZP and due to the network problem and as @Shujath mentioned that the network problem is fixed on crDroid and it will be fixed on the other roms along with July security update, I decided to use crDroid till then but now that i installed it I don't know after fixing Bliss which rom should I use: crDroid? Bliss? Havoc OS? PE? I mean all of them are great. Thanks to Shujath, you guys have a lot of options to use on XZP.
09th August 2020
Changelog :
* We are now Official.
* Managed to get RIL and Volte working wihtout
* Modem Switcher
* Customization Selector
* Modem Customization
* Fixed Random loss of Network on both Single and Dual SIM.
* Fixed Maps Crash, Huge thanks to @rcmiku
* Added Xperia Album thanks to @
* Removed Unncessary volte props causing crashes on the system.
* Satery net still passing out of the box
* Enabled Vulkan rendering.
* Removed unused Symlinks for Adreno.
* Downgraded android.hardware.gnss to 1.0
* Upgraded display vendor vendor.display.config to 1.9
* Added GNSS packages in try to fix offline GPS.
* Added CNE packages for better connectivity.
* Added IWlanService for VoWifi(Still not working)
* Added NXP hal for NFC
* Addressed CND Denails.
* Fixed Android Debugging
* Fixed Stock Camera memory Leak
* Unified Device Trees (Device will get props accordingly)
* Fixed data issue on single SIM devices(No need to toggle WiFI)
* Removed Vulkan rendering which was causing Blank screen on various apps.
* Added Sony Stock Movie Creator App
* Removed buggy DT2W
* August Security Patch merged
* Kernel upstreamed to 4.4.232
* GPS Fixed
* Enabled Doze
* Enabled sensor based wakeups(Includes Tilt, handwave, pickup, Pocket).
Head over to Post#3 for download links.
Thanks for the update, it's one of my favorite and the best rom!!
@Shujath, thanks for the update.
Is webview fix even with vulkan enabled?
Sent from my Sony G8142 using XDA Labs
I have been testing the rom for a few days and it is going quite well, only I have the doubt if there is any way to improve the audio? since at least the speaker is too low. And is there also a way to change the size of the icons at startup? since I did not find how to do it. Thank you
Habacuck said:
I have been testing the rom for a few days and it is going quite well, only I have the doubt if there is any way to improve the audio? since at least the speaker is too low. And is there also a way to change the size of the icons at startup? since I did not find how to do it. Thank you
Click to expand...
Click to collapse
For sound, edit Mixer_paths_tasha.xml search for:
Code:
<path name="SPEAKER">
replace de values 82 for 84,85, maximum 86.
For headphones, search for:
Code:
<path name="headphones">
and replace de values to 82 or 84
Recommend that you install Dolby Digital Plus.

Categories

Resources