<< DOWNLOAD >>NORTH AMERICA / NA
BELL CANADA
2.3.5 - 55.10.280.MB632.BellMobility.en.CA
2.3.5 - 55.10.3900.MB632.BellMobility.en.CA
Click to expand...
Click to collapse
LATIN AMERICA / LATAM
CHILE
Entel 2.3.5 - 5.5.1Q-55.10.282.MB632.Latam.en.01
Movistar 2.3.5 - 55.10.280.MB632.Movistar.en.01
Claro 2.3.5 - 55.10.3600.MB632.AmericaMovil.en.01
COLOMBIA
Movil 2.3.5 - 55.10.3317.MB632.Latam.en.01
Movistar 2.3.5 - 55.10.3506.MB632.Movistar.en.01
Comcel 2.3.5 - 55.10.280.MB632.AmericaMovil.en.01
PERU
Claro 2.3.5 - 55.10.290.MB632.AmericaMovil.en.01
Movistar 2.3.5 - 55.10.3809.MB632.Movistar.en.01
UEA / SOUTH AFRICA
Retail 2.3.6 - 55.1.1032.MB632.MERetail.en.06
Click to expand...
Click to collapse
<< DOWNLOAD >>EUROPE MIDDLE EAST ASIA / EMEA
UNITED KINGDOM
O2 2.3.6 - 55.1.1036.MB632.O2.en.GB
Retail 2.3.6 - 55.1.1036.MB632.Retail.en.GB
FRANCE
Retail 2.3.6 - 55.1.1036.MB632.Retail.en.FR
GERMANY
Vodafone 2.3.6 - 55.1.1038.MB632.Vodafone.en.DE
DACH
Retail 2.3.6 - 55.1.1038.MB632.Retail.en.DE
ITALY
Retail 2.3.6 - 55.1.1029.MB632.Retail.en.IT
SPAIN
Retail 2.3.6 - 55.1.1036.MB632.Retail.en.ES
NETHERLANDS
Retail 2.3.6 - 55.1.1029.MB632.CEE-Retail.en.EU
Click to expand...
Click to collapse
USE AT YOUR OWN RISK !!
some custon ROM or kernel for motorola pro+ of MOVISTAR Argentina?
It also have 2.3.6.
Thanks!!
gvillanueva said:
some custon ROM or kernel for motorola pro+ of MOVISTAR Argentina?
It also have 2.3.6.
Thanks!!
Click to expand...
Click to collapse
I second gvillanueva
instructions required
any body have step to step guide how to upgrade to O2 2.3.6 - 55.1.1036.MB632.O2.en.GB for motorola pro plus i have downloaded the file end extracted but too many files not sure where to start? thanks
Help!
Hi, does anyone know if i can flash the EURO 2.3.6 ROM on an MB632(MOTOROLA OEM VERSION UNLOCKED) with usa bands, i'm in venezuela and on DIGITEL which uses the 900mhz band for 3G, and i can't use 3g because the phone or radio does not support it, i would like to know if anyone knows if the phone is harware capable of using the 900mhz band. Thanks.
Guys! help!! how can i get a fastboot mode i try vol- +pwbn & vol+ +pwbn & vol+ vol-+pwbn and it dont work :'(
sokar311 said:
Hi, does anyone know if i can flash the EURO 2.3.6 ROM on an MB632(MOTOROLA OEM VERSION UNLOCKED) with usa bands, i'm in venezuela and on DIGITEL which uses the 900mhz band for 3G, and i can't use 3g because the phone or radio does not support it, i would like to know if anyone knows if the phone is harware capable of using the 900mhz band. Thanks.
Click to expand...
Click to collapse
Hi guys,
Anybody can help us?
is there any rom [Fastboot][LATAM][NA][EMEA] Motorola Pro + MB632 Firmware including Chinese language?
marbery3 said:
is there any rom [Fastboot][LATAM][NA][EMEA] Motorola Pro + MB632 Firmware including Chinese language?
Click to expand...
Click to collapse
http://dl.vmall.com/c0n8mu5g2j
please, rom with russian language, anybody have this?
thanks.but,this is 2.3.5 for me632,
my pro+ is 2.3.6 ,and it cannot back to 2.3.5.
Flashing Motorola Pro Plus(Pro +) MB632/ME632 ELWAY firmware in detail
For all those who wanna update their Moto pro plus with the latest and last firmware updates which is elway plus 2.3.6 gingerbread firmwares
Here is the link to download respective firmwares what so ever country you belong to : droidevelopers.com/showthread.php?t=12879
And also download latest Motorola ADB drivers from : motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
And RSD lite 5.3.1 from : datafilehost.com/d/33dce367
Once your all done downloading all the 3 requirements Install RSD lite. Extract your firmware into a folder in your PC.
Install moto ADB drivers.
Do not connect your phone yet.
Turn Off your Phone. Hold "R" & "M" & power ON and do not let the R & M buttons until Android with a triangle is shown.
Now hold Volume up and down together which will take u to android system recovery.
Do wipe data/Factory reset and wipe cache partition. To navigate use Volume button and to select use Enter button.
Once done reboot phone and immediately hold volume down.
Note: Do not use volume up. Using volume down scroll to fastboot and then press volume up to select.
Now connect your phone to PC using USB cable.
Let windows install all the required drivers. Wait till installation in completed.
Run RSD lite.
In RSD lite Open file name rsdlite which is a xml file in your firmware folder.
Once selected check below were your phone model and connection status is displayed..Status should be "connected".
Just click the start button and sit back.
It would take approx 5 to 8 min to complete..and once its complete phone will reboot by itself..
If you find fastboot error in the middle of flashing process dnt panic .,,just remove battery and turn it on by holding volume down and go to erase user data and volume up...follow screen instruction...and press volume down again go to fastboot,,
download new firmware again possible belonging to other county,,,and repeat the flashing process again ...it will be all good,,:good:
anyone wanting to root your pro plus can reply to me...:cyclops:
links out
Guys the links are out Can You replace them?
Thanks a lot ^_^
I have a so called Engineering Sample,
im german, so flashed it with 5.5.1Q-110_ELW-TA-41-release-keys-signed.Retail-en-DE,
i did everything as described by Deekx,
wipe data/cache etc. and then flashing via fastboot/RDS Lite ...
Motorola Logo appears, Android Logo is coming up too, and then all that i see is the lock screen which i cant control becouse the touchscreen of my device is not working anymore :/
I´ve read about this problem at different places, but found no solutions ...
does anyone have any ideas on how to fix this? :/
New with Motorola and a bricked phone.
Excuse me! I have a Motorola Pro+ and it just crashed, all I can see is the M logo and when I try to put it on recovery mode the display stays in black without the "hazard" logo and does not react no matter what I do, the only thing I can do is to put it on fastboot mode but I don`t know that to do then! Please help me I'm new with Motorola... Plus, its not rooted, it's just the way it came from the factory... Can I use the sbf files that are posted here to repair it? I mean I bought it in Mexico and now I'm living in Venezuela and I don't know what to do :crying::crying::crying:
I have a problem with my MB632 (o2 from UK)
When I power up, the phone stops/freeze at Red Motorola logo (only removing the battery helps).
* M + R + Pwr - does not work
* Vol-+ Pwr - acces to menu: fastboot, Reboot, Erase USERDATA, Qualcoom Flash, Exit
I used RSD Lite to upload the new firmware: 5.5.1Q-110_ELW-TA-41-release-keys-signed.Retail-en-DE (olny this link work)
All went well until i get message like: "Please manually power up this phone."
But I can't do this (the screen appears red logo motorola) :/
Info form RSD (i have print screen, but can't upload to this post):
IMEI/ESN/MEID: N/A
Technology: N/A
Software version: N/A
Flex version: N/A
Boot version: N/A
DRM version: N/A
Any suggestions?
hello my friends ,
recently I have installed a custom ROM on my huawei device , but I forgot to get backup from original ROM of my phone
all of my backup data has taken with HiSuite - the special program for huawei devices - and when I installed the new ROM i can't connect to the HiSuite in my pc because it isn't support my phone any more after changing the ROM
my question : can i install huawei official frimwares with CWM in order to use hisuite again ? [ frimware file name is like this >>> update.app ]
another question : how I can use hisuite on my new ROM for restore data ?
* : HiSuite.apk is not installing on my new ROM , can I force it ?!
please help me my friends ... thanks :x
help me pelase answer faster if is possible ...
Hi Mates,
I have android headunit in my car with the following details :
Processor Type: QuadCore-R16 1.6G
Android Version : 4.4.2
MCU Version : 5.3.19-11-41-453101-170323
System version : 20161226_4.5.10
DVD Version: 2,13,150860mc-160106
I want to upgrade from kitkat to android 5 or even 6 if it's possible.. but i don't have any idea from where to start. i familiar with Android rom flashing etc.. but not familiar yet how i find the right MCU and the updated system version image to flash.
tried to read the manual here, but i can't find a match .
Thanks a lot !
up
https://forum.xda-developers.com/sitesearch.php?q=5.3.19
Hi
In android 9 or older version of android we can easily convert single sim settings to duos
Simple root the phone install any root explorer go to efs folder and edit build.prop set sim count 1 to set sim count 2
But in android 10 this method is not working any suggestions thanks
If someone has solution pls share it.
My phone bricked and I used IDT to flash board firmware(android 8). I backup the oeminfo but in case of some mistakes the base version is not matched with cust persion and preload version. And you know, the borad firmware only shows base version. The version of omeinfo I can find on the Internet is 11.x(android 10). I also tried to use otg to update.But it can only be upgraded to 9.1.0.201.I need oeminfo to return to normal. If there is anyone has this kind of oeminfo or knows that I mistook the steps, please let me know.
Sorry for my poor English. : )