I've tried several ROMS and on my current build, which I thought was stock, I did receive some OTA security updates once I booted it up but I did not receive the Android 10 update. Which ROM is required to enable the OTA Android 10 update?
The latest ROM I attempted was downloaded from here: http://c.mi.com//miuidownload/detail?device=1700354, which will download the file "daisy_global_images_V10.0.13.0.PDLMIXM_20190813.0000.00_9.0_5d0d486f04.tgz". From there I used 7zip to extract it and then I used MiFlash to flash the ROM while in Fastboot. Unfortunately, I received an error "Erase boot_a error". I've never received that error message before so I'm not sure where I made the mistake and if this is even the correct ROM I need to flash to receive the OTA Android 10 update.
Phone is not bricked. Boots up just fine in Android 9. See attachments.
Thank you in advance.
Here's the latest one
daisy_global_images_V11.0.4.0.QDLMIXM_10.0.rar
https://drive.google.com/open?id=1SqP3hUkpBd5PaML2hy5zSf7HjNtuwNR2
Success. @andraslate
That worked perfectly sir. Thank you very much.
ConsistentCarl said:
Success. @andraslate
That worked perfectly sir. Thank you very much.
Click to expand...
Click to collapse
You're welcome.
Confused
ConsistentCarl said:
Success. @andraslate
So you got Android 10 from that and I can't find miflàsh on playstore
Click to expand...
Click to collapse
Related
I tried numerous times and cant get this thing to work! I tried flashing stock recovery to get OTA. I can download the update but once it starts to install it gets to 32% everytime and fails. I also used OTA rootkeeper. I was trying to test this out to see if i can do it so once JB comes out i would have no problem. I also tried to Kies but it says i'm on the latest firmware which is not true. Any ideas as to why i'm having such an issue with this update? I am running factory rom rooted..... Any ideas?
ViciousLSD said:
I tried numerous times and cant get this thing to work! I tried flashing stock recovery to get OTA. I can download the update but once it starts to install it gets to 32% everytime and fails. I also used OTA rootkeeper. I was trying to test this out to see if i can do it so once JB comes out i would have no problem. I also tried to Kies but it says i'm on the latest firmware which is not true. Any ideas as to why i'm having such an issue with this update? I am running factory rom rooted..... Any ideas?
Click to expand...
Click to collapse
Since you are rooted..hope you have cwm..go into recovery mode..clear cache,clear dalvik cache,and flash the current rom that you are using again..or download the latest stock rom and flash it manually..
If you want theupdate, there is a cwm flashable zip in the General sub forum
mrhaley30705 said:
If you want theupdate, there is a cwm flashable zip in the General sub forum
Click to expand...
Click to collapse
Thanks guys!
Followed this thread : http://forum.xda-developers.com/showthread.php?t=1896773
Thank you again drothenberger for being patient with me and helping me out step by step!
As the Title suggest I recently got the prompt to download an install this update and every single time (~20 times) I get the red triangle and !.
I get no other sign this failed and when the phone boots again it just asks once more if i would like to download and install the update
I'am running full stock.
Use RUU.exe from HTC's website, it should work
Mechanicalz said:
As the Title suggest I recently got the prompt to download an install this update and every single time (~20 times) I get the red triangle and !.
I get no other sign this failed and when the phone boots again it just asks once more if i would like to download and install the update
I'am running full stock.
Click to expand...
Click to collapse
To confirm what you mean by full stock - you're on the stock firmware and stock recovery without root, right?
computerslayer said:
To confirm what you mean by full stock - you're on the stock firmware and stock recovery without root, right?
Click to expand...
Click to collapse
Yep that's correct
Mechanicalz said:
Yep that's correct
Click to expand...
Click to collapse
Hmm. In theory you're in the perfect position to receive OTA updates.
3.5.710.1 - is that the Marshmallow (Android 6.0) update for your variant?
Phone is saying its already Android version 6.0
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
isipisi281 said:
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
Click to expand...
Click to collapse
Flash this in stock recovery through dload method:
https://drive.google.com/file/d/0B5I_q70mNuR4N3JLTnNDYzBEYTg/view?usp=sharing
Then you need the stock 801W rom, extract the update.app and flash it through dload. Then it should work and flash back to stock.
Thank you but your file has only 21kb is this right?
When i put the file in the dload directorie and boot with power + vol up + down the installer is verifying something installs it to 36% and aborts again. =(
isipisi281 said:
Hello together,
i got a MediaPad M2 801-W. It was running on Android 5.1.1.
So i just downloaded the 6.0 image for it. BUT i downloaded the M2-802Lxxx Version....
I dident know there are differne version of the Tablet....
The Updater just finished fine and the Tablet just started just normal BUT it is now random crashing and restarting the Os.
So i tried to install the correct version back but now the Updater in the os has no Local seetting to select the update.zip.
In Recovery the Updater works but dosent update the correct version.
It is verifying the update and than says "Software install failed".
Is there an other way to update the correct update to the tablet?
Sorry about my bad english....
Best Regards isi
Click to expand...
Click to collapse
Okey for those who did the same **** like me:
First download http://download-c.huawei.com/download/downloadCenter?downloadId=74723&version=273368&siteCode=tw
Than downgrade to this version.
Now you can update to the corect 801-w Android 6.0 version.
Me too install wrong update I have MediaPad M2 801-L, But i downloaded 6.0 the M2-801Wxxx version and got a MediaPad M2 801-W after install update.zip. Updater in the os has no Local setting to select the update.zip. I try downgrade to 5.1.1 M2-801Wxxx version by three buttons, flash stock recovery. But on choose language button "next" not working. Continue try install different stock flash...
Sorry about my bad english....
Just what I needed.
You literally saved my tablet. I had the exact issues (stupidly installed the 801L Marshmallow update on my 801W, which resulted in the non stop rebooting every 5 minutes). Nothing was working and no other roms were being accepted until I came across your post. I made this account just to thank you! The tablet was brand new and was lying boxed and unused for 3 years, so thought I'd use it
Just in the unlikely event anybody else faces this problem, just wanna add one clarification to Isipisi281's original post; to get the first step interim update to happen, make sure you unzip the update file first, then find the update.app file and paste that and it's accompanying folder into the dload folder in your directory, or else the update will fail. The rest is clockwork.
And PS, the M2 runs amazingly after the marshmallow update. Noticeably smoother, snappier and even more frugal with added android features. Highly recommended.
Thanks again!
ajsmsg78 said:
Flash this in stock recovery through dload method:
https://drive.google.com/file/d/0B5I_q70mNuR4N3JLTnNDYzBEYTg/view?usp=sharing
Then you need the stock 801W rom, extract the update.app and flash it through dload. Then it should work and flash back to stock.
Click to expand...
Click to collapse
Hey man - what is the file you shared in this post please?? I need to do the same as is in this thread - revert from 80xL to W version of firmware but the update keeps failing...any idea please??
Sopis said:
Hey man - what is the file you shared in this post please?? I need to do the same as is in this thread - revert from 80xL to W version of firmware but the update keeps failing...any idea please??
Click to expand...
Click to collapse
I don't have the file anymore. Maybe someone in this thread still has it? I'm pretty sure is was the downgrade script to be able to downgrade.
ajsmsg78 said:
I don't have the file anymore. Maybe someone in this thread still has it? I'm pretty sure is was the downgrade script to be able to downgrade.
Click to expand...
Click to collapse
gotcha..it has been a long time ago...well, no matter how I try, I cannot flash anything :/ every FW I downloaded fails...I am lost with this tablet...
Sopis said:
gotcha..it has been a long time ago...well, no matter how I try, I cannot flash anything :/ every FW I downloaded fails...I am lost with this tablet...
Click to expand...
Click to collapse
Yeah, welcome to Huawei world. They don't make it easy to go back to stock on the older devices.
ajsmsg78 said:
Yeah, welcome to Huawei world. They don't make it easy to go back to stock on the older devices.
Click to expand...
Click to collapse
cheers
anyway, do you have any idea how I could do this? as I said, I managed to get back to lollipop, but am still on L version and cannot flash anything over it...any hint is much appreacited...unfortunately, I am not twrp, frp unlocked so fastboot is out of question
Here are the latest updates for the dual sim and single sim Nova variants:
CAN-L11C432:
Full Update:
CAN-L11C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77947/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77947/f1/full/changelog.xml
Small Update:
CAN-L11C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77944/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77944/f1/full/changelog.xml
CAN-L01C432:
Full Update:
CAN-L01C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/changelog.xml
Small Update:
CAN-L01C432B340: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77930/f1/full/update.zip
Changelog: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77930/f1/full/changelog.xml
The Full Updates you should be able to install from Marshmallow which will bring you to the current release of Nougat on the Nova and the Small Updates you can install from the Nova Nougat build CAN-L11C432B320 and CAN-L01C432B320.
If your device comes up with NRD90M test-keys then for the CAN-L11C432 variant you can try installing this after to get the correct Build number showing and functionality working: http://update.hicloud.com:8180/TDS/...-L11_hw_eu/update_data_full_CAN-L11_hw_eu.zip and for the CAN-L01C432 variant: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
I have managed to get it to work on the CAN-L01C432 variant but a couple of others have not managed to install the hw eu update for their device which has left them with NRD90M test-keys showing under Build number and themes not working.
I tried to update but it fails at 41%. I'm on CAN-L01C02B130 , Vodafone branded.
pasmadferit said:
I tried to update but it fails at 41%. I'm on CAN-L01C02B130 , Vodafone branded.
Click to expand...
Click to collapse
These updates are for CAN-L01C432 and CAN-L11C432 variants of the Nova. You can try this if you want to but I am not sure if it will work on a branded device: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74460/f1/full/update.zip. This is the latest Nougat update I have found for the CAN-L01C02 variant of the Nova.
lintern said:
These updates are for CAN-L01C432 and CAN-L11C432 variants of the Nova. You can try this if you want to but I am not sure if it will work on a branded device: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74460/f1/full/update.zip. This is the latest Nougat update I have found for the CAN-L01C02 variant of the Nova.
Click to expand...
Click to collapse
thanks for the link but i have the same problem. On "updater" the phone didn't find it, i tried with putting down the phone with volume and power keys but it gave me the same error at 41%. Shame on Huawei that don't release the original firmware yet >.<
pasmadferit said:
thanks for the link but i have the same problem. On "updater" the phone didn't find it, i tried with putting down the phone with volume and power keys but it gave me the same error at 41%. Shame on Huawei that don't release the original firmware yet >.<
Click to expand...
Click to collapse
I had the same problem at first but after flashing this: https://drive.google.com/open?id=0B4T1GJ6EZ3LvTWNpZ0p5YXVINGs the Nougat update installed fine. The link is the stock EMUI 5 recovery which is for Nougat which I got of this page: https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084/page7.
lintern said:
I had the same problem at first but after flashing this: https://drive.google.com/open?id=0B4T1GJ6EZ3LvTWNpZ0p5YXVINGs the Nougat update installed fine. The link is the stock EMUI 5 recovery which is for Nougats which I got of this page: https://forum.xda-developers.com/nova-plus/how-to/c432b320-android-7-0-available-try-t3527084/page7.
Click to expand...
Click to collapse
I'll try, thanks for the help man
pasmadferit said:
I'll try, thanks for the help man
Click to expand...
Click to collapse
It's up to you if you want to try it. You have to flash the recovery by adb first if you do this and then try updating again I see no reason why it should not work.
lintern said:
It's up to you if you want to try it. You have to flash the recovery by adb first if you do this and then try updating again I see no reason why it should not work.
Click to expand...
Click to collapse
I have to unlock bootloader first i think, right?
pasmadferit said:
I have to unlock bootloader first i think, right?
Click to expand...
Click to collapse
Unfortunately yes which is why I said it's up to you if you want to try it out. Some guys were lucky with the beta Nougat releases on the Nova which installed easily via the updater app or recovery on the device whereas you, me and others have had a bit more trouble which has required us to do more to update. Where it is a official Huawei recovery you may be able to flash it with adb without issues but I'm not sure. It's your call if you want to try it.
Thanks for the help man, i flashed first the recovery and then the update and all was ok. Very grateful.
pasmadferit said:
Thanks for the help man, i flashed first the recovery and then the update and all was ok. Very grateful.
Click to expand...
Click to collapse
No problem, did you install CAN-L01C02B130B407?
lintern said:
No problem, did you install CAN-L01C02B130B407?
Click to expand...
Click to collapse
I don't know what firmware is... In settings It shows me only model Number (Huawei CAN-L01) and serial number. Do you know how i can see it on emui 5.0?
pasmadferit said:
I don't know what firmware is... In settings It shows me only model Number (Huawei CAN-L01) and serial number. Do you know how i can see it on emui 5.0?
Click to expand...
Click to collapse
Extract this: http://update.hicloud.com:8180/TDS/...-L01_ti_it/update_data_full_CAN-L01_ti_it.zip and put the UPDATE.APP in a dload folder on the root of your SD Card and install it like the main Nougat update. This should fix it so the Build number shows up correctly and some other functionality issues. Once this is done next to Build Number it should say: CAN-L01C02B307, if it does then everything is working fine.
Hey I have downloaded CAN-l01 version, installed via fastboot (recovery.img, boot.img and system.img) but the updater is still missing from settings and the version number is NRD90M test-keys i'm not able to install the eu pack (update stops at 5%), how can I solve the missing updater?
mArIuS% said:
Hey I have downloaded CAN-l01 version, installed via fastboot (recovery.img, boot.img and system.img) but the updater is still missing from settings and the version number is NRD90M test-keys i'm not able to install the eu pack (update stops at 5%), how can I solve the missing updater?
Click to expand...
Click to collapse
I never installed mine by fastboot using adb, I extrated the big update then put it in a dload folder and installed using the three button method. I dunno why the hw eu pack is not installing as I had this issue and that installed fine for me.
If you installed this: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip then try installing this using the three button method: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip and if you have tried that and it did not work then try this: http://update.hicloud.com:8180/TDS/...L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
lintern said:
I never installed mine by fastboot using adb, I extrated the big update then put it in a dload folder and installed using the three button method. I dunno why the hw eu pack is not installing as I had this issue and that installed fine for me.
If you installed this: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v77904/f1/full/update.zip then try installing this using the three button method: http://update.hicloud.com:8180/TDS/...-L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip and if you have tried that and it did not work then try this: http://update.hicloud.com:8180/TDS/...L01_hw_eu/update_data_full_CAN-L01_hw_eu.zip.
Click to expand...
Click to collapse
It was the only way I was able to install the update method of the three buttons stopped updating to 5% whatever recovery I use.
Update.zip archive goes installed from CWM?
mArIuS% said:
It was the only way I was able to install the update method of the three buttons stopped updating to 5% whatever recovery I use.
Update.zip archive goes installed from CWM?
Click to expand...
Click to collapse
I have no idea then. The update worked fine for me using the three button method and all I had to do after was install the hw eu update that matched and it is all working fine. Yes you can install archived updates through custom recovery but I have not tried it with Huawei updates so I dunno what the outcome will be.
Here is a couple of screenshots which show the update working for me.
Flashed the CAN-L11C432B340 full update with the 3-button-method coming from Emui 4.1 (Android 6).
The update was successful up to 100%, but then I got a flash failed error. Phone booted succesful to Emui 5.0 with the NRD90M test-keys bug so in addition i flashed update_data_full_CAN-L11_hw_eu.zip and all seems to be fine except the hotspot functionality.
Does the hotspot feature work for you on B340? I cant enable it and after a while i get a settings force close....
will this work on Canadian Huawei Nova Plus variant?
jrosero said:
will this work on Canadian Huawei Nova Plus variant?
Click to expand...
Click to collapse
If your device Is CAN-L01C432 or CAN-L11C432 then yes if not then no.
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
sandy108 said:
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
Click to expand...
Click to collapse
Is this ok to install on the US variants?
Sent from my iPhone using Tapatalk
From what I understand, I'm just supposed to download this and then go to my recovery and update from recovery right?
As in like update from internal storage right?
What version is this from?
hey bro did you have the flashligt icon and gesture in the new update?
Anyone flashed this with flash fire?
How to install on rooted devices???
sandy108 said:
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
Click to expand...
Click to collapse
You didn't tell us what variant of the phone you have
How to install???
zimplemeh said:
Is this ok to install on the US variants?
Click to expand...
Click to collapse
No this is not recommended to install on US variant
saqlainrattansi said:
From what I understand, I'm just supposed to download this and then go to my recovery and update from recovery right?
As in like update from internal storage right?
Click to expand...
Click to collapse
Yes you got it right
olive23 said:
What version is this from?
Click to expand...
Click to collapse
It's from build number *67
Jayesh Nirve said:
How to install???
Click to expand...
Click to collapse
Either use stock recovery or use Flashfire
zeft64 said:
You didn't tell us what variant of the phone you have
Click to expand...
Click to collapse
Indian Variant
Flash fire ain't working phone just reboots with no changes
can i install on retbr?
I think the location version does not matter as long as you have the right build number. I had retla .15 and tried to flash .35 in order to update to .67 (fail), the ota ask for .14/.15. So I had to install stock .15 again and redo the process.
Something I'd like to add is the stock recovery did not recognize internal or sd storage, so I had to push ota via ADB.
*Also my warning bootscreen changed from N/A to Bad Key multiple times for apparently no reason. But everything is working fine.
Pls tell me how u went back to 15 plsss
Aredhelelen said:
I think the location version does not matter as long as you have the right build number. I had retla .15 and tried to flash .35 in order to update to .67 (fail), the ota ask for .14/.15. So I had to install stock .15 again and redo the process.
Something I'd like to add is the stock recovery did not recognize internal or sd storage, so I had to push ota via ADB.
*Also my warning bootscreen changed from N/A to Bad Key multiple times for apparently no reason. But everything is working fine.
Click to expand...
Click to collapse
Exactly what I have been trying to tell. There is a fingerprint mismatch that happens. On a side note how did you manage to take yourself back from .35 to .15 and then update to .67. I get the last part, but downgrading with a higher bootloader; and where did you get the .15 build
You can simply install one of the stock versions already posted here in the forum, I just downloaded the .15 and installed it again via fastboot with the command lines (also explained in that post, in comments) like any other stock rom. Then, after starting the phone you must activate USB debbuging mode to be able to use ADB commands, so you can restart the phone in stock recovery and activate the push ota update via ADB.
Anyway, if this sounds complicated I think there is already a flashable .zip to apply ota, you can give it a try.