Related
hi i just rooted my lg optimus lte bell and flash recovery
wen i get into recovery show lg logo and
secure booting error
cause boot certification verify
enter the fastboot
enter the fastboot
long time no see any member can help me im stuck on this
miguelpaddy said:
hi i just rooted my lg optimus lte bell and flash recovery
wen i get into recovery show lg logo and
secure booting error
cause boot certification verify
enter the fastboot
enter the fastboot
long time no see any member can help me im stuck on this
Click to expand...
Click to collapse
Try the Unbrick methond in this link I'm pretty sure you can recover your phone this way .I have done chaotic things to mind and always manage to get out of anything by doing the Unbrick method.If you do decide to do it the trick is to uninstall any of the drivers you currently have installed for the phone and install the once that come with the Download file for the unbrick method.O and connect your usb to the back USB slots if using a desktop.
Yeah, you can't flash CWM with the bootloader from official ICS. You have to go through the unbricking guide.
Malnilion said:
Yeah, you can't flash CWM with the bootloader from official ICS. You have to go through the unbricking guide.
Click to expand...
Click to collapse
thanks for your help guys i go over all proceed on unbrick and chinese firmware then stock att and finally recovery
once again thanks for all :good:
Hi can anyone advise what the problem could be?
I have been trying to upgrade my Xperia play from Gingerbread to Jellybean and failed,
My handset is Bootloader unlock Status = No, although O2 unlocked the carrier so I could use any carrier.
So when I goto Sony bootloader unlock site the phone will not goto fastboot mode. Just says Waiting
When I open Fashtool I have successfully rooted the phone, but when I try to Flash the phone rather than go into Fastboot mode the just restarts.
I am using Windows 7 64bit.
Any help on getting this done is greatly appreciated
Grover
Umm I think only the simlock has been removed. But the bootloader is still locked and cannot be unlocked. and what button are you pressing to go into flashboot?
ryanperez said:
Umm I think only the simlock has been removed. But the bootloader is still locked and cannot be unlocked. and what button are you pressing to go into flashboot?
Click to expand...
Click to collapse
I have used search button whilst plugining in USB.
Does that mean bootloader is locked, so impossible to unlock?
The sticker on the back of the phone is W46. Read somewhere that using Flashtool may damage the phone.
Thanks in advance
Grover
Grover2000 said:
Hi can anyone advise what the problem could be?
I have been trying to upgrade my Xperia play from Gingerbread to Jellybean and failed,
My handset is Bootloader unlock Status = No, although O2 unlocked the carrier so I could use any carrier.
So when I goto Sony bootloader unlock site the phone will not goto fastboot mode. Just says Waiting
When I open Fashtool I have successfully rooted the phone, but when I try to Flash the phone rather than go into Fastboot mode the just restarts.
I am using Windows 7 64bit.
Any help on getting this done is greatly appreciated
Grover
Click to expand...
Click to collapse
SIM Unlocking the phone inst the same as Unlocking the Bootloader. If you Have Bootloader unlock Status = No you can still unlock your Bootloader via the Test Point method.
If you Unlock your phone with the Test Point method you will not have acces to Fastboot Mode, but you can still Flash Kernels via Flash Mode Using the FTF version of it(insted of a boot.img file).
Look in my signature if you want any FTF kernel.
TheScriptKitty said:
SIM Unlocking the phone inst the same as Unlocking the Bootloader. If you Have Bootloader unlock Status = No you can still unlock your Bootloader via the Test Point method.
If you Unlock your phone with the Test Point method you will not have acces to Fastboot Mode, but you can still Flash Kernels via Flash Mode Using the FTF version
Click to expand...
Click to collapse
Please note this method only works for xplays made before a certain date. (can't remember exactly when but google will help)
Sent from my R800i using XDA Free mobile app
korrectmethod said:
Please note this method only works for xplays made before a certain date. (can't remember exactly when but google will help)
Sent from my R800i using XDA Free mobile app
Click to expand...
Click to collapse
I have successfully done the test point via s1 tool method, but I'm not quite sure which version of JB to upload and how to my Xperia Play. Can someone give me a step by step guide on how to flash my phone?
Thanks in advance
Grover
Grover2000 said:
I have successfully done the test point via s1 tool method, but I'm not quite sure which version of JB to upload and how to my Xperia Play. Can someone give me a step by step guide on how to flash my phone?
Thanks in advance
Grover
Click to expand...
Click to collapse
Just read the instructions for whatever kernel you are using, and same with the rom you want to install.
http://forum.xda-developers.com/showthread.php?p=39047223
Sent from my R800i using XDA Free mobile app
As above, follow the guide above. Since you unlocked via the testpoint and there's no fastboot, you need to have your kernels in a .ftf file format.
Here's a thread with download links to ftf kernels: http://forum.xda-developers.com/showthread.php?t=2739559
You will need to use flashtool to flash them. The JB ROM can then be flashed via recovery normally.
My Xperia PLAY was locked to O2 as well and testpoint unlocked, and these have been working fine for me so far... although for some reason my phone stopped working with ICS ROMs. GB and JB still works however.
Phone bricked.
I flashed the Lupus JB kernal and then entered recovery menu and deleted formatted and now it just a blank screen as if the phone is off yet plugging in the usb is recognised by computer yet flashtools and Sony companion can't repair or recognise.
Any ideas?
Grover
Exactly what did you delete/format under recovery? All I did was pick the factory reset option, then wiped cache and dalvik cache, and then flashed the ROM and worked fine for me. I'm using version 8 of the kernel however for the extra data space.
Here are the ftf files for the stock original Sony firmware, which you can use to restore your device if flashing goes wrong (.79 is the latest): http://forum.xda-developers.com/showpost.php?p=43935357&postcount=2
I formatted the file as you did and it came on with a blank lit screen so I flash the default file in firmware a on flash tools to get nothing but a blank dead screen
Any help is greatly appreciated
Grover
1) Download the .79 ftf firmware and place it in Flashtool's firmware folder.
2) Open up flashtool, and plug in the Xperia PLAY in flash mode (hold back button while plugging in USB). Flashtool should report the device is in flash mode.
3) Press the flash button (lightning symbol) and select the stock .79 firmware, then confirm to flash that.
4) Wait for it to finish flashing. Flashtool will then ask you to reboot the device.
5) Unplug the phone and hold the power button until it vibrates. Let go and it should boot back into the stock Xperia software.
It should now be back to stock, and you can attempt to try custom ROMs and kernels again.
Unfortunately this is where the problem lies. Flash tools doesn't recognise that the phone is there hence can't flash it with stock firmware.
It is In a dead state. Is there anyone who offers a service to Unbrick it and what tools are required?
I am not dettered by having bricked my phone, as this is all part of my learning, although I would appreciated a possible fix to Unbrick it.
Thanks in advance
Grover
Have you installed the drivers for the phone from the flashtool driver folder? Have a check here on how to do it: http://forum.xda-developers.com/showthread.php?t=2054486
KiraYahiroz said:
Have you installed the drivers for the phone from the flashtool driver folder? Have a check here on how to do it: http://forum.xda-developers.com/showthread.php?t=2054486
Click to expand...
Click to collapse
All the drivers where installed as per instruction. The phone is in a state of being off all the time no lights or anything.
The only thing that is heard is the usb sound on the computer when it is connected.
Flashtools Sony Companion doesn't see the phone at all.
grover
TheScriptKitty said:
If you Unlock your phone with the Test Point method you will not have acces to Fastboot Mode, but you can still Flash Kernels via Flash Mode Using the FTF version of it(insted of a boot.img file).
Look in my signature if you want any FTF kernel.
Click to expand...
Click to collapse
But my bootloader was unlocked Via testpoint and i have both fastboot mode and flash mode working fine, i install kernels via .img like everyone else and im a r800X cdma user.
xdarkmario said:
But my bootloader was unlocked Via testpoint and i have both fastboot mode and flash mode working fine, i install kernels via .img like everyone else and im a r800X cdma user.
Click to expand...
Click to collapse
Yes, if you unlocked your Bootloader via the test point method for the R800x and the R800i you should have access to Fast Boot Mode. You only don't get access to Fast Boot Mode if you have "Bootloader unlock status: No"(and unlocked via the Test Point Method), witch is about 100% of R800a users.
As above. Sadly, all phones sold from O2 UK have bootloader unlock as no, so the normal way of unlocking won't work and only the tespoint method is avaliable... So no fastboot. Due to that, I buy my phones unlocked and unbranded now. Luckily thanks to the great developers on here we can still root and play around with custom ROMs.
What version of Windows are you using Grover? I'm not sure if it's related but I have problems with adb/fastboot drivers on Windows 8/8.1 with HTC devices. Everything works perfectly on 7 though.
Recently, I tried to install a custom ROM of Android L (beta), which bricked my device (Canvas A1).
My device Neither boots nor able to go to recovery mode or fastboot.
Pressing power button or Power+Volume Up isn't booting anything.
My bootloader is actually unlocked.
So I tried to flash stock ROM using SP Flashing Tool and it downloaded successsfully.
But still not booting.
Is there any other way to unbrick it rather than going to Micromax Service Center??
Thanks in Advance
Problem solved!
Actually, I had used an old version of SP Tools which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
First, Install VCOM drivers for MTK devices..
Then install Android CDC Gadget Drivers.
Download the KitKat stock ROM.. (See instructions there)
Use SP Flash Tools v5.1424 from there to download it.
Use both 'download' and 'firmware upgrade' modes to flash.
Other issues after flashing:
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted KitKait using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
btw micromax service center isnt asking a word even if you have a custom rom..actually may be they are so dumb that they cant find it if its unlocked or not
GokulNC said:
Recently, I tried to install a custom ROM of Android L (beta), which bricked my device (Canvas A1).
My device Neither boots nor able to go to recovery mode or fastboot.
Pressing power button or Power+Volume Up isn't booting anything.
My bootloader is actually unlocked.
So I tried to flash stock ROM using SP Flashing Tool and it downloaded successsfully.
But still not booting.
Is there any other way to unbrick it rather than going to Micromax Service Center??
Thanks in Advance
Click to expand...
Click to collapse
just flash the stock backup via SP flash tool
Same problem did u find any solution for it yet ?
Press power button and and the volume button up at the same time and restore everything that how you can fix it or use a computer to fix it
Bro i can't get in recovery my phone is dead after downloading the stock rom using sp flash tool
When trying to get firmwhere upgrade it shows failed to get pmt info
Other two methods works download and format+ download only works properly without any error but still it's not booting up
aayan007 said:
Bro i can't get in recovery my phone is dead after downloading the stock rom using sp flash tool
When trying to get firmwhere upgrade it shows failed to get pmt info
Other two methods works download and format+ download only works properly without any error but still it's not booting up
Click to expand...
Click to collapse
Download the KitKat stock ROM..
Flash using latest SP Flash Tools v5.1548 (This is the latest version & highly recommended)
Use both 'download' and 'firmware upgrade' modes
GokulNC said:
Download the KitKat stock ROM..
Flash using latest SP Flash Tools v5.1548
Use both 'download' and 'firmware upgrade' modes
Click to expand...
Click to collapse
I did it after download hit firmware upgrade it shows failed to get pmt info ????
aayan007 said:
I did it after download hit firmware upgrade it shows failed to get pmt info
Click to expand...
Click to collapse
This might help: http://forum.xda-developers.com/showpost.php?p=45780613&postcount=2
Thnx bro that may help me but i don't how to connect my phone on Meta mode to pc yet
unable to switch on mobile
I tried the mentioned methods but still not able to switch on my mobile I am able to flash format or format+download but not firmware upgrade. I am not able to switch on my mobile or recovery. plz help
can you tell us how to get into META MODE....??
GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
i also have same problem. still facing the same problem after followng your instruction. help me please
---------- Post added at 07:55 AM ---------- Previous post was at 07:55 AM ----------
harkirat singhh said:
can you tell us how to get into META MODE....??
Click to expand...
Click to collapse
power botton+vol up
---------- Post added at 07:56 AM ---------- Previous post was at 07:55 AM ----------
nilesh15 said:
I tried the mentioned methods but still not able to switch on my mobile I am able to flash format or format+download but not firmware upgrade. I am not able to switch on my mobile or recovery. plz help
Click to expand...
Click to collapse
same problem im also facing, if you get solution please let me know,
Hi guys... I know this isn't correct place, but I have a bricked Canvas A1... It neither starts, nor goes to fastboot mode... Only random offline battery charging screen shows up... So I wanted to try the SP Flash Tools method.. But I can't find it... If anyone can guide me, thanks in advance!
I'm looking for Stock LP ROM of A1 flashable by SP Flash Tools
DarkSJ1998 said:
Hi guys... I know this isn't correct place, but I have a bricked Canvas A1... It neither starts, nor goes to fastboot mode... Only random offline battery charging screen shows up... So I wanted to try the SP Flash Tools method.. But I can't find it... If anyone can guide me, thanks in advance!
I'm looking for Stock LP ROM of A1 flashable by SP Flash Tools
Click to expand...
Click to collapse
Check this:
http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150
All links and procedure is given there
GokulNC said:
Actually, I had used an old version of SP Tools (v.5.13) which didn't support MTK6582 scatter configs.
Then v.5.1424 from http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150 helped me out and I successfully downloaded the stock ROM in meta-mode.
For users who encounter the problem:
To get warranty back by resetting flash counter, choose "Firmware Upgrade" in SP Tools, which will automatically lock bootloader and set flash_counter=0
You can check it by running the command "fastboot getvar all" in fastboot mode using ADB kit or tools in PC.
Also fixed IMEI issues using http://en.miui.com/thread-10061-1-1.html (Needs unlocked bootloader again)
Fixed Wi-fi error using http://forum.xda-developers.com/showthread.php?t=2730486 (Needs root access)
Rooted again using TWRP recovery and installed SuperSu 2.40 without bootloader unlock (doesnot void warranty if warranty present)
Check here: https://www.youtube.com/watch?v=DxlowF80deY
Thanks XDA
Click to expand...
Click to collapse
Will this work when i can't mount/cache
I am having the same issue formated it first with download only option then it stuck on micromax logo so I flashed it again with format all+ download and from then its not starting up. pls help
hi i am also having same problem can guys please help me
Didnt Helped me...
ive bricked my phone via flashtool while i was flashing a rom but it didnt flashed via download method, so i tried format + download and that formatted my device but didnt downloaded the rom...
now it just shows installing driver while i connect to pc and is detectable by flashtool but the device shows nothing...
everytime i try flashing a new rom via flashtool it shows illegal as the roms were third party...
please suggest me a rom that is stock and that not show illegal while flashing...
Thanks in Advance...
I flashed the wrong bootloader so fastboot does not work. I still have TWRP Working but anything I flash does not boot. I am looking for a full factory OTA that I can flash via TWRP so it will re-flash the proper bootloader and all the other factory images so I can un-brick it through fastboot. I have tried to flash many different update files but it gives an error 7 and says to be on 6.0.1 or 7.0 before installing it. Can someone please help me un-brick this or link a full OTA that I can flash via TWRP. I attached the bootloader.img so if anyone could make a flashable zip to flash the stock bootloader that would probably work.
vibraniumdroid said:
I flashed the wrong bootloader so fastboot does not work. I still have TWRP Working but anything I flash does not boot. I am looking for a full factory OTA that I can flash via TWRP so it will re-flash the proper bootloader and all the other factory images so I can un-brick it through fastboot. I have tried to flash many different update files but it gives an error 7 and says to be on 6.0.1 or 7.0 before installing it. Can someone please help me un-brick this or link a full OTA that I can flash via TWRP. I attached the bootloader.img so if anyone could make a flashable zip to flash the stock bootloader that would probably work.
Click to expand...
Click to collapse
Follow this discussion.
"https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492"
ROM_HUNTER said:
Follow this discussion.
"https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492"
Click to expand...
Click to collapse
does not work
vibraniumdroid said:
does not work
Click to expand...
Click to collapse
If fastboot works then you're not hard bricked, most likes soft brick. I would suggest flashing magisks 14 after you flash the rom as dm-verity will check if your system is modified , dm-verity needs to be disabled
flashallthetime said:
If fastboot works then you're not hard bricked, most likes soft brick. I would suggest flashing magisks 14 after you flash the rom as dm-verity will check if your system is modified , dm-verity needs to be disabled
Click to expand...
Click to collapse
I already tried flashing magisk. Also I can boot into the bootloader but the computer does not see it in fastboot anymore (probably because I flashed the bootloader.img for the moto z play droid accidentally)
vibraniumdroid said:
I already tried flashing magisk. Also I can boot into the bootloader but the computer does not see it in fastboot anymore (probably because I flashed the bootloader.img for the moto z play droid accidentally)
Click to expand...
Click to collapse
Hard bricked for sure
flashallthetime said:
Hard bricked for sure
Click to expand...
Click to collapse
not exactly because twrp works. If I could flash fastboot images through TWRP I could un-brick it. If somebody could modify the stock rom's updater-script and remove the requirement to be running a stock rom then I could flash that and I would probably be unbricked.
vibraniumdroid said:
not exactly because twrp works. If I could flash fastboot images through TWRP I could un-brick it. If somebody could modify the stock rom's updater-script and remove the requirement to be running a stock rom then I could flash that and I would probably be unbricked.
Click to expand...
Click to collapse
Bootloader can not be flashed through twrp so you'll need to flash the bootloader through fastboot. If your device is not recognized when you plug it in your computer then you're hard bricked, if fastboot is not accessable then you're hard bricked
flashallthetime said:
Bootloader can not be flashed through twrp so you'll need to flash the bootloader through fastboot. If your device is not recognized when you plug it in your computer then you're hard bricked, if fastboot is not accessable then you're hard bricked
Click to expand...
Click to collapse
so you are sure that it is impossible to make a flashable zip of bootloader. Maybe it is just my computer I'll try booting of linux on usb and then see if fastboot can see it.
flashallthetime said:
Bootloader can not be flashed through twrp so you'll need to flash the bootloader through fastboot. If your device is not recognized when you plug it in your computer then you're hard bricked, if fastboot is not accessable then you're hard bricked
Click to expand...
Click to collapse
how do you fix a hardbrick?
vibraniumdroid said:
how do you fix a hardbrick?
Click to expand...
Click to collapse
Here https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492
flashallthetime said:
Here https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492
Click to expand...
Click to collapse
I tried that does not work:crying: also I got windows to see the phone as addison fastboot s but when i do fastboot devices it does not show up
vibraniumdroid said:
I tried that does not work:crying: also I got windows to see the phone as addison fastboot s but when i do fastboot devices it does not show up
Click to expand...
Click to collapse
Do you have the correct driver,, if you use Linux there is no need for the driver just install minimal ADB and fastboot
vibraniumdroid said:
I tried that does not work:crying: also I got windows to see the phone as addison fastboot s but when i do fastboot devices it does not show up
Click to expand...
Click to collapse
Have you tried using these albus (Z2 Play) blank flashes as mentioned here to repair your bootloader? https://forum.xda-developers.com/showpost.php?p=73402033&postcount=181
https://forum.xda-developers.com/showpost.php?p=73411048&postcount=206
These may hopefully get your device to the point where it's recognised in fastboot and you can then flash the stock ROM via fastboot.
vibraniumdroid said:
how do you fix a hardbrick?
Click to expand...
Click to collapse
You don't. That's why it's called a hard brick.
flashallthetime said:
Do you have the correct driver,, if you use Linux there is no need for the driver just install minimal ADB and fastboot
Click to expand...
Click to collapse
booted of linux from a usb and that worked thanks
okay so i am pretty new still to flashing firmwares and using fastboot in general. I have the cricket version of the moto g6 play (forge) and noticed that i could not unlock the bootloader through moto's website . i noticed that the model number for the cricket version of the xt1922-9 was the same as the retail version from motorola . which on the website says has the ability to unlock . so i tried to flash the stock retail firmware for the retail and the most update verision being android pie XT1922-9_JETER_RETUS_9.0_PPPS29.118-68-3_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and ended up flashing everything succesfully other than the boot.img and all of the system.img files and when i try and reboot the phone to recovery it says failed to pass validation back to fastboot . and the baseband section in fastboot now says not found . can someone help me with how i can flash all the correct files so i can get the phone just to boot up again.
You flashed everything except the boot.img and the system.img files?? That means you mixed up two FWs on one device...
Try flashing this FW for jeter_cricket from mirrors.lolinet.com
https://mirrors.lolinet.com/firmware/moto/jeter/official/Cricket/XT1922-9_JETER_A_CRICKET_9.0_PCPS29.118-63-2_cid1_subsidy-CRICKET_regulatory-DEFAULT_CFC.xml.zip
WoKoschekk said:
You flashed everything except the boot.img and the system.img files?? That means you mixed up two FWs on one device...
Try flashing this FW for jeter_cricket from mirrors.lolinet.com
Click to expand...
Click to collapse
i tried to flash that firmware and still , im only able to succefully flash everything but the system images the bootloader the recovery and the boot image.
jesheesh said:
i tried to flash that firmware and still , im only able to succefully flash everything but the system images the bootloader the recovery and the boot image.
Click to expand...
Click to collapse
What is "not successfully"? Could you explain it more detailed, please? There's always an output message in terminal
jesheesh said:
i tried to flash that firmware and still , im only able to succefully flash everything but the system images the bootloader the recovery and the boot image.
Click to expand...
Click to collapse
You could try LMSA flash rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my ali using XDA Labs
sd_shadow said:
You could try LMSA flash rescue option
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
i'll download it and try it out
jesheesh said:
i'll download it and try it out
Click to expand...
Click to collapse
I'll also go ahead and copy and paste the output for you here as well.
Sorry it takes me so long to reply . Most of my tinkering time is eaten up with my other phone I have that just so happens to be the only model variant that can't unlock its boot loader hence no root or twrp ... :/
But anyway yeah I'm gonna try the tool and paste those lines of fast boot code for you. One sec.