Develop Bugs

Att new software update

Woke up this morning to notification of new software update from att. I'm already on the official KK update from couple of months ago. Anybody else get this? What is the update?

http://www.att.com/esupport/article.jsp?sid=KB420581&cv=820

From the above link...
"Update to android 4.4, including improved security".
So what does this mean? What exactly in 4.4 has been updated? What security updates? Anyone know?
Sent from my LG-E980 using XDA Free mobile app

Thanks for reply rom
But i actually meant did anyone know specifically the differences much like Andy's question

The update forced on my phone, crashed it because I had a custom recovery, so I had to flash back to. Jelly Bean and now I can't obtain root after re-updating.

dginsd said:
The update forced on my phone, crashed it because I had a custom recovery, so I had to flash back to. Jelly Bean and now I can't obtain root after re-updating.
Click to expand...
Click to collapse
Kingo root
2SHAYNEZ

shayneflashindaily said:
Kingo root
2SHAYNEZ
Click to expand...
Click to collapse
Have you tried it on a device thats had the new ota update installed?
Also I thought there was a security concern with the kingo root method, something about it being from China and contains malwares that sends files back to its home server, supposedly these files are the ones necessary to clone the device.

dginsd said:
Have you tried it on a device thats had the new ota update installed?
Also I thought there was a security concern with the kingo root method, something about it being from China and contains malwares that sends files back to its home server, supposedly these files are the ones necessary to clone the device.
Click to expand...
Click to collapse
Towelroot works as well, but I have no idea how to get a custom recovery installed,

freegee
dolph8886 said:
Towelroot works as well, but I have no idea how to get a custom recovery installed,
Click to expand...
Click to collapse
download the freegee app from the play store and it'll install a recovery for you. Either clockworkmod or twrp

mjoel7014 said:
download the freegee app from the play store and it'll install a recovery for you. Either clockworkmod or twrp
Click to expand...
Click to collapse
I Don't think so .did u try it . because it doesn't work for official upgrade 4.4.2 lol

lol
romrix said:
http://www.att.com/esupport/article.jsp?sid=KB420581&cv=820
Click to expand...
Click to collapse
it's looking good
---------- Post added at 10:46 PM ---------- Previous post was at 10:34 PM ----------
yijinsa said:
I Don't think so .did u try it . because it doesn't work for official upgrade 4.4.2 lol
Click to expand...
Click to collapse
Download the GPRO_Recovery_6.0.4.4.apk from this page and install it then use it to flash clockworkmod or tarphttp://forum.xda-developers.com/optimus-g-pro/development/lg-g3-port-optimus-gpro-e980-t2827464

New OTA...

New OTA incoming....
About 190mb or so...
Wifi Stability and May Security patches...

thank you. i will go try this tonight or tomorrow...

This OTA seems to break root
---------- Post added at 04:22 PM ---------- Previous post was at 04:16 PM ----------
Have 6.0.1stock rooted with BETA-SuperSU-v2.67-20160121175247 thru TWRP. Lost root and superuser yesterday after this update. Still have TWRP and reinstalling the SuperSU seems to work but isn't successful upon reboot

kbless60 said:
This OTA seems to break root
---------- Post added at 04:22 PM ---------- Previous post was at 04:16 PM ----------
Have 6.0.1stock rooted with BETA-SuperSU-v2.67-20160121175247 thru TWRP. Lost root and superuser yesterday after this update. Still have TWRP and reinstalling the SuperSU seems to work but isn't successful upon reboot
Click to expand...
Click to collapse
I installed the OTA update and then Odin TWRP and then flashed super SU. Root is working just fine for me and still sticking after reboots.

You installed the latest security update OTA (190mb) and then Odin TWRP? It didn't seem to affect my installation of TWRP or at least I was able to get into recovery as before. Install SuperSU as before with no errors. Reboot and no root or SuperSU. May have to do a complete reinstall tonight. Glad to know root can still work after this little update.
Solved: installing the latest SuperSU 2.71 worked without a hitch, root restored

Anything new in this ota?
Sent from my SM-G920P using Tapatalk

kbless60 said:
You installed the latest security update OTA (190mb) and then Odin TWRP?
Click to expand...
Click to collapse
Yes, I was on stock non-rooted with stock recovery prior to the latest OTA, then I decided to root and add TWRP
---------- Post added at 10:55 AM ---------- Previous post was at 10:53 AM ----------
edlee said:
Anything new in this ota?
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
not really. phone does seem a bit more responsive though.

:fingers-crossed:

I Brick Phones said:
Yes, I was on stock non-rooted with stock recovery prior to the latest OTA, then I decided to root and add TWRP
---------- Post added at 10:55 AM ---------- Previous post was at 10:53 AM ----------
not really. phone does seem a bit more responsive though.
Click to expand...
Click to collapse
Which twrp version do you use?
Can you give me the link to get it? Thank you very much.

yaibakt said:
Which twrp version do you use?
Can you give me the link to get it? Thank you very much.
Click to expand...
Click to collapse
3.0.2.0 worked for me on latest OTA..

anderd said:
3.0.2.0 worked for me on latest OTA..
Click to expand...
Click to collapse
where did you get that 3.0.2.0? i have 3.0.2.0 work on PD2, but after OTA to PD3, it doesnt work anymore.

Does anyone have issues with data? I'll be browsing the internet or something, then randomly my data stops, I see the 3g or lte symbol go away then come back. It's extremely annoying.b
Sent from my SM-G920P using Tapatalk

Saafir said:
It's just Sprint. It's been mainly 3g service here in Ohio for a couple days now. Check Down Detector if your area is affected.
---------- Post added at 11:37 AM ---------- Previous post was at 11:34 AM ----------
Please stop posting in every thread available with the same problem. If you get your files from koops thread here http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
There is no reason it won't work, other than user error. Follow directions.
Click to expand...
Click to collapse
Hey, this is the forum is all about.
I did want to ask only in koops thread, but well, not much answer there. So i ask only once again here, definitely not every thread available.
Moreover, everyone's phone could have its own issues, which need troubleshoots. Not all are the same.
I have installed twrp so many times for so many phones, so that i know that might be something else.
Im using twrp 3.0.2-0 in koops thread on pd2 well, but it didnt work on pd3. So what might be wrong here?

Saafir said:
It's just Sprint. It's been mainly 3g service here in Ohio for a couple days now. Check Down Detector if your area is affected.
Click to expand...
Click to collapse
I've had this issue everywhere tho. It does seem to be related to switching from 3G to LTE. But I can't say for certain that each and every time it dropped, that when it came back it was a different service.

Saafir said:
I was troubled about it myself, but today seems to be alright thus far lol
Click to expand...
Click to collapse
So you had this issue too? Are you on the latest update PD3?
Has anyone posted the update.zip?

Saafir said:
I was troubled about it myself, but today seems to be alright thus far lol
---------- Post added at 02:33 PM ---------- Previous post was at 02:31 PM ----------
You've posted in three different threads with the same issue. You arn't following directions, or it would work. It has nothing to do with the firmware upgrade. Follow directions.
Click to expand...
Click to collapse
Ok, so may i ask you why i would successfully install twrp on PD2 if i didnt follow the steps? Or i was just lucky 1000 times before?
Dont act like a mod if you arent, please.
And if my question annoys you, use your ignore function instead.
This is my last post about this issue.

I'm on the Renegade ROM. If I wanted to install this update, I'd have to ODIN all the way back to stock, correct?
Sent from my SM-G920P using Tapatalk

Saafir said:
Yes, but it was happening for about two days before I took the update
---------- Post added at 05:10 PM ---------- Previous post was at 05:09 PM ----------
I'm perfectly fine with not blocking you. A thousand flashes is a lot. You shouldn't be having this problem.
Click to expand...
Click to collapse
Thank you. I may take the upgrade. This issue is driving me nuts.
iamterence said:
I'm on the Renegade ROM. If I wanted to install this update, I'd have to ODIN all the way back to stock, correct?
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
Yes you will. Odin to stock pd2 or pb6.
Sent from my SM-G920P using Tapatalk

elesbb said:
Thank you. I may take the upgrade. This issue is driving me nuts.
Yes you will. Odin to stock pd2 or pb6.
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
Is it even worth upgrading to, I guess is the real question here
Sent from my Nexus 5X using Tapatalk

iamterence said:
Is it even worth upgrading to, I guess is the real question here
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
If it fixes the data drop issue, then yes lol.
Saafir said:
I consider security improvements always worth upgrading for.
I believe they patched the vulnerability from Ad Blockers in this update, among other things. And don't be turned away by the couple people having issues re-rooting. I assure you, everything works fine.
Click to expand...
Click to collapse
What vulnerability was that?
Sent from my SM-G920P using Tapatalk

T807T Security Error after flashing

I flashed my T-Mobile Tab S 10.5 with custom roms and the LTE didn't work so I tried flashing to stock but now it prompts with
"Security Error This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
I tried using Samsung Kies & Smart Switch to reload software with no luck. I even tried downloading from Sammobile and any other roms that were compatible with my model to try and regain LTE. Any help would be appreciated!

P5King said:
I flashed my T-Mobile Tab S 10.5 with custom roms and the LTE didn't work so I tried flashing to stock but now it prompts with
"Security Error This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
I tried using Samsung Kies & Smart Switch to reload software with no luck. I even tried downloading from Sammobile and any other roms that were compatible with my model to try and regain LTE. Any help would be appreciated!
Click to expand...
Click to collapse
Can you get to Download mode?

Nandr0idC0nsumer said:
Can you get to Download mode?
Click to expand...
Click to collapse
Yes, I've tried flashing stock firmware from odin.

P5King said:
Yes, I've tried flashing stock firmware from odin.
Click to expand...
Click to collapse
What exact error does it give off?

Nandr0idC0nsumer said:
What exact error does it give off?
Click to expand...
Click to collapse
With the stock rom it gives me. "Security Error This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
With custom roms it just wont find any signal from tmobile and say theres no sim in the device.

P5King said:
With the stock rom it gives me. "Security Error This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
With custom roms it just wont find any signal from tmobile and say theres no sim in the device.
Click to expand...
Click to collapse
can you install/boot into twrp?

Nandr0idC0nsumer said:
can you install/boot into twrp?
Click to expand...
Click to collapse
Yes I can.

P5King said:
Yes I can.
Click to expand...
Click to collapse
Get a Linux VM and convert the tar into a flashable zip, then flash that.
EDIT: I can do it if you like

Nandr0idC0nsumer said:
Get a Linux VM and convert the tar into a flashable zip, then flash that.
EDIT: I can do it if you like
Click to expand...
Click to collapse
That would be awesome if you could! I'm installing root and twrp right now.

P5King said:
That would be awesome if you could! I'm installing root and twrp right now.
Click to expand...
Click to collapse
Will do. Firmware download is very slow from sammobile so may be a little while.

Nandr0idC0nsumer said:
Will do. Firmware download is very slow from sammobile so may be a little while.
Click to expand...
Click to collapse
Don't worry you can take your time.

P5King said:
Don't worry you can take your time.
Click to expand...
Click to collapse
Thanks but I should hopefully have it done tonight

@P5King I need something from you.
What version of TWRP are you using? The build for T805?

Nandr0idC0nsumer said:
@P5King I need something from you.
What version of TWRP are you using? The build for T805?
Click to expand...
Click to collapse
Yes, it's the only one I could find.

P5King said:
Yes, it's the only one I could find.
Click to expand...
Click to collapse
Thank you. I will use the boot.img location from the T805.
---------- Post added at 04:10 PM ---------- Previous post was at 04:06 PM ----------
ROM is building now.
---------- Post added at 04:25 PM ---------- Previous post was at 04:10 PM ----------
ROM is uploading now.
---------- Post added at 04:50 PM ---------- Previous post was at 04:25 PM ----------
[MENTION]@P5King[/MENTION] it's ready:
https://drive.google.com/file/d/0BxPLAwBVP_TfNE5KUU5fSTlVTkU/view?usp=sharing
Do a full wipe and then flash this. You can also flash supersu zip if you like. then reboot and report back

P5King said:
That would be awesome if you could! I'm installing root and twrp right now.
Click to expand...
Click to collapse
No need. I have compiled twrp with factory firmware flashing support.
Just flash the system.img from the stock firmware using Twrp.

Nandr0idC0nsumer said:
Thank you. I will use the boot.img location from the T805.
---------- Post added at 04:10 PM ---------- Previous post was at 04:06 PM ----------
ROM is building now.
---------- Post added at 04:25 PM ---------- Previous post was at 04:10 PM ----------
ROM is uploading now.
---------- Post added at 04:50 PM ---------- Previous post was at 04:25 PM ----------
[MENTION]@P5King[/MENTION] it's ready:
https://drive.google.com/file/d/0BxPLAwBVP_TfNE5KUU5fSTlVTkU/view?usp=sharing
Do a full wipe and then flash this. You can also flash supersu zip if you like. then reboot and report back
Click to expand...
Click to collapse
Thank you so much! I'll do it as soon as I get home. I'll keep you updated.

ashyx said:
No need. I have compiled twrp with factory firmware flashing support.
Just flash the system.img from the stock firmware using Twrp.
Click to expand...
Click to collapse
He's been trying thru Odin which is essentially the same thing in terms of flashing so maybe the zip will work better idk

Nandr0idC0nsumer said:
He's been trying thru Odin which is essentially the same thing in terms of flashing so maybe the zip will work better idk
Click to expand...
Click to collapse
It's not. Twrp doesn't communicate with the bootloader like odin does.

@P5King How'd it go? Did it succeed?

QI5 Stock and Magisk?

I'm running into a roadblock here, and I was wondering if anyone running stock QI5 has gotten Magisk to install correctly and pass SafetyNet.
ODINing QI5 down, ODINing TWRP down, and installing Magisk from TWRP does not seem to give a functioning Magisk install. Specifically, MagiskHide will not run and save its settings. This causes SafetyNet to fail.
When trying to enable MagiskHide from the commandline (magiskhide --enable), I get a message saying that logd is not running.

IBNobody said:
I'm running into a roadblock here, and I was wondering if anyone running stock QI5 has gotten Magisk to install correctly and pass SafetyNet.
ODINing QI5 down, ODINing TWRP down, and installing Magisk from TWRP does not seem to give a functioning Magisk install. Specifically, MagiskHide will not run and save its settings. This causes SafetyNet to fail.
When trying to enable MagiskHide from the commandline (magiskhide --enable), I get a message saying that logd is not running.
Click to expand...
Click to collapse
I'm on QI5, and with Magisk installed and running well.
Sent from my SM-N910P using Tapatalk

jam97 said:
I'm on QI5, and with Magisk installed and running well.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
What version? I found that QI5 is not 100% compatible with Magisk v16 due to a hard requirement of logd being enabled. v15.3 is fine.

IBNobody said:
What version? I found that QI5 is not 100% compatible with Magisk v16 due to a hard requirement of logd being enabled. v15.3 is fine.
Click to expand...
Click to collapse
I do update Magsik regularly, now I'm on v16 and haven't had any problems since v15.
Sent from my SM-N910P using Tapatalk

jam97 said:
I do update Magsik regularly, now I'm on v16 and haven't had any problems since v15.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Hmmm... And you pass SafetyNet?

IBNobody said:
Hmmm... And you pass SafetyNet?
Click to expand...
Click to collapse
I've never test it , cuz need only to be rooted!
I will try and let you know the results
Sent from my SM-N910P using Tapatalk
---------- Post added at 02:22 PM ---------- Previous post was at 02:17 PM ----------
jam97 said:
I've never test it , cuz need only to be rooted!
I will try and let you know the results
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
ok, I test it and found the following
ctsprofile:false
basicintegrity:false
Is that means anything?
Sent from my SM-N910P using Tapatalk

jam97 said:
I've never test it , cuz need only to be rooted!
I will try and let you know the results
Sent from my SM-N910P using Tapatalk
---------- Post added at 02:22 PM ---------- Previous post was at 02:17 PM ----------
ok, I test it and found the following
ctsprofile:false
basicintegrity:false
Is that means anything?
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanks for confirming!
It means that Magisk Root works, but Magisk Hide does not. That is why SafetyNet fails; you cannot hide su from SafetyNet (or any other app) without Magisk Hide. That was the problem I had with v16. I switched back to v15.3 because that is the latest version that works with our stock ROM.

IBNobody said:
Thanks for confirming!
It means that Magisk Root works, but Magisk Hide does not. That is why SafetyNet fails; you cannot hide su from SafetyNet (or any other app) without Magisk Hide. That was the problem I had with v16. I switched back to v15.3 because that is the latest version that works with our stock ROM.
Click to expand...
Click to collapse
Hmm, I see
Thanks,
Sent from my SM-N910P using Tapatalk
---------- Post added at 05:53 PM ---------- Previous post was at 05:47 PM ----------
jam97 said:
Hmm, I see
Thanks,
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Just returned back to v15.3 and run the SafetyNet check and got success!
I'm just wondering, any benefits from success safetynet check?
Sent from my SM-N910P using Tapatalk

jam97 said:
Just returned back to v15.3 and run the SafetyNet check and got success!
I'm just wondering, any benefits from success safetynet check?
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
There are many apps that won't run unless SafetyNet passes or make attempts to detect root. Android Pay is one. Magiskhide is the component that hides your root. There are some apps that Magiskhide can't fool, though.

wich TWRP goes with magisk 15.3 ?

CLaudioman2009 said:
wich TWRP goes with magisk 15.3 ?
Click to expand...
Click to collapse
Why are you using such an ancient version...? I'm using 18.2 on every phone, including my Note 4. Twrp version is 3.2.3-0.

Ace42 said:
Why are you using such an ancient version...? I'm using 18.2 on every phone, including my Note 4. Twrp version is 3.2.3-0.
Click to expand...
Click to collapse
i read that 15.3 was the last version to work well with sm-910P .. i tried 18.2 and i can`t make it work for somereason says erro when flashing. maybe i dont have stock bootloader or something. i bought the phone from some guy that modified it and dont remember wtf installed to it. i live outside usa and the phone is working and when i format it and install all stock then it doesnt work for calls etc. so i have to restore the backup .
so i dont know what to do. thats why i was trying to kind some magisk to work.
maybe i have to restore bootloader and i have QI5 formware . and i dont want to mess up the phone

IDK if this would be correct place to ask, looked everywhere and this is only thread with even close to problem I have.
Sm-n910p
Magisk 19.3
Lineage 16, latest pie version.
Root works, nothing else tho. Modules don't work, yet install. Safety net passes tho, which is weird, as nothing else works.
If someone could shed some light or perhaps point me in the right direction.

bobbyp1086 said:
IDK if this would be correct place to ask, looked everywhere and this is only thread with even close to problem I have.
Sm-n910p
Magisk 19.3
Lineage 16, latest pie version.
Root works, nothing else tho. Modules don't work, yet install. Safety net passes tho, which is weird, as nothing else works.
If someone could shed some light or perhaps point me in the right direction.
Click to expand...
Click to collapse
Thats a good question, I sure hope someone gives you the correct answers. I would also like to know as I was thinkIng of installing Lineage 16 myself

Link for 10.0.4 T-mobile Update

I've pulled a link to anyone wanting the most recent update. It's about 120mb total.
https://android.googleapis.com/pack.../d2925d6801711c64cf3096f0db7498b29874c68d.zip

corey103 said:
I've pulled a link to anyone wanting the most recent update. It's about 120mb total.
https://android.googleapis.com/pack.../d2925d6801711c64cf3096f0db7498b29874c68d.zip
Click to expand...
Click to collapse
Doing the Lord's work:angel:

do you have the boot image for the 10.0.3? don't have data after trying to update with magisk installed. thanks

imna357 said:
do you have the boot image for the 10.0.3? don't have data after trying to update with magisk installed. thanks
Click to expand...
Click to collapse
Just use a 10.0.3 boot image for any variant to boot, just don't flash.
---------- Post added at 10:35 AM ---------- Previous post was at 10:33 AM ----------
corey103 said:
I've pulled a link to anyone wanting the most recent update. It's about 120mb total.
https://android.googleapis.com/pack.../d2925d6801711c64cf3096f0db7498b29874c68d.zip
Click to expand...
Click to collapse
My OTA keeps failing over and over so is there a way to manually install this update after downloading it?

Thread closed
An existing thread already exists so please use that one for further discussions etc
https://forum.xda-developers.com/oneplus-7t/how-to/10-0-4-t-mobile-update-incoming-t4000563