Hi,
Anyone has below problem which WiFi logo stays far from sim signal !!!
Sorry wrong place to post please delete admin
Related
Hi all!
I got an O2 XDA2 that hangs at the provider logo screen on start up. My problem is that i never seen this working before so i don't know any details about it. My question is if ther is any way to repair this device because i've read many posts but all the solutions i get did not work.
The device was sold in spain and the provider is amena.
Please help,
Thanks,
Marc.
Yoo
Try a hard reset .
Hi!
After many retries i've noticed that it was not hanged at the logo screen but it tooks about 30 min to boot! The problem was related to the GSM hardware. I could update both ROM and ext. ROM but no success with the radio rom. So the solution was ask the provider to repair/replace it (and they did for free ).
Thanks a lot everybody
I NEED YOUR HELP.... My qtek 9000 will not start, after new rom update with JASJAR Crossbow.... i have flashed back to orijinal rom but it stuck on boot screen.... it shows qtek logo and freeze there... I can put it on bootloader mode and reflash again with every rom but it wil not start after qtek logo on the boot screen...however my uni is stuck at the post screen with all the boot info. It is useless now, please help me...
Have a look at the "Are you having problems upgrading to Crossbow" sticky at the top of the forum, it'll take you through some steps. It's ok, it's kinda common and should be easy to get out of. Go through those steps and if you've still got problems, post back.
Regards
Spyder
rind9 said:
I NEED YOUR HELP.... My qtek 9000 will not start, after new rom update with JASJAR Crossbow.... i have flashed back to orijinal rom but it stuck on boot screen.... it shows qtek logo and freeze there... I can put it on bootloader mode and reflash again with every rom but it wil not start after qtek logo on the boot screen...however my uni is stuck at the post screen with all the boot info. It is useless now, please help me...
Click to expand...
Click to collapse
Please check your private messages, I have sent you one that should resolve your issue.
-Jwrightmcps
Also, please post if this fixes your problem...
Jwrightmcps said:
Please check your private messages, I have sent you one that should resolve your issue.
-Jwrightmcps
Also, please post if this fixes your problem...
Click to expand...
Click to collapse
Thanks for quick respons.... I have also read all this links before i wrote my thread with no succes. But, but in that link you gave i saw that
i should not use copy/paste on the screen when i use mtty1 but it should be manually inserted... I mean this command: task 28 55aa...and i am now reflashing it with orijinal rom... i hope it will help... i will be back with result
i am a happy man
It is ok now... A last Q... I really want to use/test your rom, but i am afraid of it will give the samme result. Do you think i should do it..! THANKS AGAIN...
I-mate Jasjar stuck on bootscreen
after upgrade My Jasjar is hanging at boot and i can not get him into bootloader screen anymore all the things in the forum i tryed but
it looks like my buttons are not working anymore my power buttons is not doing anything and a reset gives back a stuck bootscreen with red letters
can someone please tell me what to do now
thanks in advance
Don't ask me how but i did get him into bootloader screen and did de upgrade again now it works fine with crossbow at last
thanks for the people who where thinking how to help me but i solved it myself.
pls help my
[I NEED YOUR HELP.... My qtek 9000 will not start, after new rom update with JASJAR Crossbow.... i have flashed back to orijinal rom but it stuck on boot screen.... it shows qtek logo and freeze there... I can put it on bootloader mode and reflash again with every rom but it wil not start after qtek logo on the boot screen...however my uni is stuck at the post screen with all the boot info. It is useless now, please help me...
zac_cosmin said:
[I NEED YOUR HELP.... My qtek 9000 will not start, after new rom update with JASJAR Crossbow.... i have flashed back to orijinal rom but it stuck on boot screen.... it shows qtek logo and freeze there... I can put it on bootloader mode and reflash again with every rom but it wil not start after qtek logo on the boot screen...however my uni is stuck at the post screen with all the boot info. It is useless now, please help me...
Click to expand...
Click to collapse
Welcome
Please READ the Wiki!!
Good luck,
Hello
Help me to solve this problem
I tired to upgrade ROM from RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00. 32U_5.09.00.20_release_140022_signed.exe to RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.0 0.32U_5.09.05.30_2_release_142828_signed.exe
but during the process mobile vibrated and went off.. after that I remove battery and reinsert battery .then on screen I just see black screen with htc logo and 4 error triage..
I tried to recover, relflash, root, downgrade from 0.92 to 0.80 but I failed in all things.. Kindly help to make my mobile rework...
I tried to upload ROM RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00. 32U_5.09.00.20_release_140022_signed.exe but its showing ERROR 110 .. FILE NOTE OPENING ERROR. Use right ROM..
IN the boot menu only showing RUU not other option comling like fastboot, recovery , restart etc
Here I am posting Image of my HTC Deisre screen. I hope it will help to understand problem.
VIsit Urls to see image Use http on the place h*tp
h*tp://i53.tinypic.com/s3lj0m.jpg
---
If I will plug in USB cable in mobile and remove it then this screen show..
h*tp://i53.tinypic.com/9ljq86.jpg
Moved to Q&A. Please don't post question threads in Development.
rolfd said:
Moved to Q&A. Please don't post question threads in Development.
Click to expand...
Click to collapse
ok thanks and sorry
Yeah dude, don't PM me asking for help either.
NEVER PM people asking for help.
NEVER Post in the Dev Section
Thank you
Hello everybody. I'm sorry if this has been asked anymore but I'm desperated. I made a phone exchange Galaxy S1-Htc One X 2 days ago and I didn't check if connections works. Home, I found that I get WIFI "error" and Bluetooth stucks "Turning on" when I try to turn them on(4.2.2 ROM). I understood that is a software error and I have to downgrade my firmware. Well, I did that, I've installed ViperX 4.0.6 and nothing happened. The I tried "Renovate_Final4" which is 4.1.1 ROM and still nothing happened, Please someone help me, is anything I can do to make them both work?
flashed the boot.img from the rom.zip ? if not.....do so
andrey94vl said:
Hello everybody. I'm sorry if this has been asked anymore but I'm desperated. I made a phone exchange Galaxy S1-Htc One X 2 days ago and I didn't check if connections works. Home, I found that I get WIFI "error" and Bluetooth stucks "Turning on" when I try to turn them on(4.2.2 ROM). I understood that is a software error and I have to downgrade my firmware. Well, I did that, I've installed ViperX 4.0.6 and nothing happened. The I tried "Renovate_Final4" which is 4.1.1 ROM and still nothing happened, Please someone help me, is anything I can do to make them both work?
Click to expand...
Click to collapse
No one can help me? Is this a hardware issue? Gps doesn't work too
Dude......did you flash the boot.img from the rom....it was a question ?! It seems if i didn't post anything there ^^ ......
I can go and stay away if you don't want help
Guys, good morning
I 'm ... with a Serious Problem in Zenfone 2 , Yesterday , logo What I woke up , I saw what the phone was a update via OTA available , so I sent bullet. WHEN the phone was restarted to complete an installation he was without Asus logo hair rhythm and did not leave her More ( circular infinity) , ate SO okay, I decided to give hum reset the cleaning and Another route Device Recovery itself and to solve anything , so I went and downloaded the rom site Asus Para Install through Recovery, BUT in the middle of some procedures phone rebooted and got the USB logo screen
I found a way to reverse it through xFSTK but after the procedure done the Zenfone turns on and stays on a black screen with a square with some colored strips, then disappears and the screen goes black
Sorry for not posting photos but it's because I do not have permission to the forum for this yet
I'm not sure what to do, someone could help me ?
sorry, wrong place xD
Ashnar198 said:
sorry, wrong place xD
Click to expand...
Click to collapse
Could redirect me to the place right? Sorry for the error and because I have no forum costume with
I meant i did post in the wrong place, not you. Anyway you should try to post on this thread
http://forum.xda-developers.com/zenfone2/help/help-post-questions-instead-making-t2997779
Good luck!