Related
Complete Beginners Guide To Flash Custom ROM on Xperia S | 2011 Devices
This Guide Is Made Easier To Understand The Basics To Install / Flash Custom ROM (Specifically On Xperia Phones). You will not need to go to any annoying links and go on reading lengthy descriptions everything required is provided here. :victory:
Everything is Step By Step.
Just Follow Them And Everything Will Work Fine
Now Lets Get Down To Business.
This Tutorial is Specially For
For Complete Beginners
For Newcomers to Android
For Those Who Want To Learn Flashing ROM Easy Way
People who did not had any encounters with Programming
Click to expand...
Click to collapse
Thanks To All The Senior Developers For Providing Us The Knowledge In Developing Modding And Flashing And Amazing Guides Through Out XDA Forum. Without You People This Guide Would Not Have Been Complete
Click to expand...
Click to collapse
This Guide Is Covered in Next 4 Posts With Every Step As Described Below.
NOTE : I Will Explain This Thread For Flashing Custom ROM Cyanogenmod 10 for Xperia S.
Link here---> https://sites.google.com/site/projectfreexperia/
You can download any Stable ROM The Procedure is Same For All.
Step by Step Process Tree
Step 1. Rooting Xperia SStep 2. Unlocking BootloaderStep 3. Installing CWM RecoveryStep 4. Flashing A Custom ROMStep 5. That's it! You will Have The Custom Rom Running.
Click to expand...
Click to collapse
Step 1 : Rooting Your Xperia S
Step 1 : Rooting Your Xperia S
This is done by Using A Root Tool Provided by Our Senior Developer @Bin4ry. Please Press His Thanks Button For Helping Out For The Amazing TooL!
Just Download The Tool By Clicking Here : Root_with_Restore_by_Bin4ry_v30
For Xperia S 2.55 Firmware look in this thread: http://forum.xda-developers.com/show...php?p=39498268
But Don't Start Running The Tool Yet. Before That you need to Do A Couple Of Things, :angel:
Before Rooting What You Need?
1.) Install Your Phones Software Driver, ---> PC Companion Will Do The Job Just Connect The Phone And Check If It Detects!
2.) Activate USB Debugging, Setting ---> Developer Options
3.) Activate Unknown Sources, Setting ---> Security
4.) Connect Your Phone via USB
5.) Confirm That Your Device Is Connected Properly In Device Manager.
Only Then,
6.) Proceed With Rooting Tool Kit.
Click to expand...
Click to collapse
How To Use It?
1.) Download Attached File.
2.) Extract it Using Winrar
3.) Double click the RunMe.bat and follow instructions!
Xperia phones with "older" firmware = Normal mode
Sony Tablet and similar = Special mode
Xperia phones with JB Firmare = Mode 3 (Goroh_kun mode)
Click to expand...
Click to collapse
Complete Video Tutorial: https://www.youtube.com/watch?v=7EpkrCq1gfM
Just Follow The On Screen Instructions. (Its really easy like installing a game :laugh
After The Software Finishes Its Work! Your Phone Must BE Rooted By Now!
Step 2 : Unlocking Bootloader on Xperia S
Step 2 : Unlocking Bootloader on Xperia S
Procedure To Unlock Bootloader of Sony Xperia S LT26i :
1.) Installation of Fastboot USB Drivers (Xperia S)2.) Unlocking Bootloader of Xperia S
Click to expand...
Click to collapse
Now, We Will Unlock The Bootloader,
Why to Unlock Bootloader?
1.) You can flash custom ROMs/Kernels
2.) You don't need to worry if the new firmware can be rooted or not as with unlocked bootloader u can always ROOT Your device
[ Before We Begin Unlocking Bootloader ]
Get the IMEI code for ur device: type *#06# in phone dialer to find it out, note only the digits (no dashes)
Make Sure The Fastboot Drivers Are Installed.
Make sure u have a windows PC with USB cable to connect the phone
Power down ur phone and keeping the Volume Up button pressed connect the USB cable to PC this will trigger FASTBOOT mode and windows
Will start driver installation, extract the above package and point the driver install to that location (usb_driver) folder
Once drivers are installed just disconnect cable and power on device.
[ How to Unlock ] (Official Way)
Video Link ---> http://www.youtube.com/watch?v=LRH3pC7MhEA
For better understanding, I highly recommend you to watch the above video along with the instructions below:
1.) Download ‘Fastboot Drivers And Pacakges File For Xperia S’ file from → Here
2.) Extract the file you downloaded above on your PC. You’ll get the following three files:
drivers.zip
fastboot_with_Android_USB_file.zip
3.) Go to: http://unlockbootloader.sonymobile.com/ and read everything!
This will open a web page in your default browser. Scroll to the bottom of the Instructions on the page and you’ll see a link like “Continue”, click on it.
In the pop-up window click “Yes, I’m sure” and then in the next window click on both the checkboxes, and then click “I accept”.
4.) Now insert the details as per the instructions:
First 14 digits of your IMEI No. Do NOT enter the last digit (15th) in the box. To know your IMEI No. dial *#06# on your Xperia Arc.
Your Name
Your Email Address
Click Submit.
5.) You’ll get a KEY to unlock boot loader. Write it down somewhere you can remember, it will be used later.
6.) Switch off your phone.
7.) Now extract the “fastboot_with_Android_USB_file.zip” file you got in Step 2.2.
8.) Pick up your phone (it must be switched off) and hold the “Menu” button (the key at the bottom right of your phone), now while holding the “Menu” button connect your phone to your PC with an USB cable.
9.) Once connected — the LED light near the phone’s USB plug will turn blue. If it doesn’t — repeat the Step 8.
10.) Now to install the drivers do the following:
Extract the “drivers.zip” file you got in Step 2.1
Open “Device Manager” on your PC and look for “S1Boot Fastboot” under the head “Other devices”
Right-click on “S1Boot Fastboot” and select “Update Driver Software…”
Now select “Browse my computer for driver software” and select the folder where you’ve extracted all the three files you got in Step 2. Once done — click Ok.
Now click Next (Make sure you’ve ticked the “Include subfolders” checkbox).
If you see any Windows security warning box, don’t worry . Just select “Install this driver software anyway”
Wait for “Windows has successfully updated your driver software” message to appear on your screen. Now click Close.
11.) Open the “fastboot” folder from the file we extracted in Step 7.
12.) Now hold Shift and press mouse right click (Shift + Mouse Right Click) anywhere on the empty white space inside the “fastboot” folder. And then select “Open command window here” from the context menu.
13.) Now in the command prompt window type/paste the following:
fastboot.exe -i 0x0fce getvar version
14.) It should return a value like “0.3”. This ensures that your device is correctly connected.
15.) Now type/paste the following line in the command prompt window:
fastboot.exe -i 0x0fce oem unlock 0xKEY
IMPORTANT! Replace the word “KEY” from the above line with the KEY that you received in Step 5. Then Hit Enter.
Click to expand...
Click to collapse
16.) Now wait for the process to complete. Command prompt will show a “Finished” message when it will be completed.
17.)Once it’s done, disconnect the USB cable from your phone and switch it ON.
18.)Your phone’s boot loader should now be Unlocked.
(The above videos and some steps are for Xperia 2011 devices, but most the steps are same for Xperia S/P/U/Sola)
Click to expand...
Click to collapse
Step 3 : Installing ClockWorkMod Recovery With RoceoverX
Step 3 : Installing ClockWorkMod Recovery With RoceoverX
We Will Install Recovery Using RecoverX Software.
Download The Software from Here ----> RecoverX v1.6.8.0
You just have to select your device and the recovery, click "Install" and RecoverX does the rest !!! It's that simple!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 4 : Flashing ROM
Step 4 : Flashing ROM
Assuming you have already downloaded your required file, let’s proceed.
ROM Flashing
1.) Copy Paste update on Phone
Copy update- copy update-xxx-xxx-xxx.zip coresponding to your device to sdcard
Copy GAPPS. Download Link [Here]
2.) Flash CM kernel
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC.
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led).
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led).
Click 6 and 7 - Select the boot.img (Extract The boot.img file from zip)
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode.
Click to expand...
Click to collapse
3.) Boot into Recovery
While FXP logo is displayed (and lights are lit) press several times volume up to enter CWM (recovery)
4.) Flash ROM
To update main rom select
Install zip from sdcard
Choose zip from sdcard
Select your update (copied at step 2)
To flash gapps redo steps a-c and select gapps package
Use gapps version designed for your android version !!! Link ---> Here, Gapps
5.Wipe device
Whip Cache
Whip Dalvik Cache (Advanced Option)
Cache Partition
If after boot you experience ForceClose then is recomended to reboot to recovery and wipe device
Click to expand...
Click to collapse
6.) Partition format
7.) Reboot and Enjoy :victory:
Troubleshooting
If you experience a bootloop (phone constantly reboots and reboots on the boot screen) or a soft brick (powering on the phone shows an orange triangle with a phone and computer), don’t be afraid. XDA to the rescue!
For a bootloop:
Take out the battery.
Wait for 3 min.
Put the battery in. Do NOT power on the phone.
Keep pressing Volume Up + Home simultaneously and press the power button to turn on the device.
Once the phone shows the model number screen, leave the buttons.
Your phone will boot into recovery.
Select “Wipe data/ Factory reset”. (Volume Up for going up and Volume down to go down)
After the reset is done, select “Reboot system now”.
The phone will reboot and you should be all fine.
For a soft brick:
You probably flashed some faulty firmware or firmware not meant for your device.
The File You Downloaded Must Be Incomplete.
Download the correct firmware and flash again.
woa! really great thread!
thnx for this step by step tutorial.. this really will help me and other begginers here in xperia forum..
there's some mistake in your guide:
first, you can't root last xperia s rom version with Bin4ry root tool
it would be better to link the main thread which then will lead people to the right place
then, i think that instead of using recoverX to install CWM, it would be better to flash advanced stock kernel (and then TWRP if you like)
and you don't need to flash FXP kernel before flashing rom
last but not least... i think that this thread would be better sitting in general section (instead of the android development one)
mirhl said:
there's some mistake in your guide:
first, you can't root last xperia s rom version with Bin4ry root tool
it would be better to link the main thread which then will lead people to the right place
then, i think that instead of using recoverX to install CWM, it would be better to flash advanced stock kernel (and then TWRP if you like)
and you don't need to flash FXP kernel before flashing rom
last but not least... i think that this thread would be better sitting in general section (instead of the android development one)
Click to expand...
Click to collapse
Thank You! I'd do the same..
And about the Last .55 Version I'd update the thread.
Next for the Advanced kernal.. Its true! but for beginners understanding CWM forms a very good base.
There were some issues with TWRP while providing null value in moving from CM10 to OPEN SEMC
So prefered CWM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.0.3 at the post number 17 !
PLEASE FOLLOW VERY CAREFULLY THE NEXT STEPS
Make sure to have installed the OTA "full_k15ta_a-ota-1484567521.zip" (201701) !
1) Download the TWRP 3.0.2 at the next link :
http://www.mediafire.com/file/ya6ql5kcqtqy1h9/Apollo_twrp_3.0.2.rar
2) Install the adb drivers and fastboot commands :
http://www.mediafire.com/file/2df821420xpdp48/ADB_1.4.2.rar
Unrar the rar. Run “adb-setup.exe”. Hit “Y” to all 3 questions.
3) Tap on Settings --> About phone --> Tap Build number seven times.
Developer options --> OEM unlocking enabled and USB debugging enabled.
4) Download SuperSU.zip and BusyBox.zip at the next link :
http://www.mediafire.com/file/g4hubpximcn2g1b/LAST_SU-BU.rar
5) Unrar the rar. Copy the 2 zips onto your microSD.
STEPS TO DO ONCE ONLY :
6) Plug your phone to PC via USB cable.
Allow the pop up request on your phone to give your PC USB debugging.
7) Open CMD (command prompt).
8) Type the next command :
adb reboot bootloader (and press enter)
9) Now type the next command :
fastboot oem unlock (and press enter)
10) Press volume up (into your phone) to confirm to unlock the bootloader.
You will see in the CMD prompt the next messages :
"Start unlock flow", and when it will be finished, you will see "OKAY".
11) Reboot in normal mode (be patient, when you unlock the bootloader, the phone reset to factory).
12) Now tap 7 times on Build number. Then Developer options, and re-enable OEM unlocking and USB debugging.
STEPS TO DO EVERY TIME YOU NEED TWRP RECOVERY :
13) Copy the TWRP (recovery.img) into the same folder of fastboot.exe and adb.exe ( c:\adb\ ).
14) Connect your phone to the PC via USB cable.
15) Open CMD (command prompt) and type the next command :
adb reboot bootloader (and press enter)
16) Now type the next command :
fastboot boot c:\adb\recovery.img (and press enter)
17) Onto TWRP, if asking you to swipe to allow modification of System, tap KEEP READ ONLY.
18) Now - the most important thing - tap on Backup.
19) Check mark on Nvram, Boot, System and Data.
20) Tap on Select Storage, tap on MicroSDCard, tap on OK.
21) Tap Swipe to Backup.
22) Return to the main menù of TWRP.
23) Tap Install. Tap on Select Storage. Tap Micro SDCard. Tap OK.
24) Tap on SuperSU zip
25) Swipe to confirm Flash.
26) Tap on Reboot.
27) Tap on POWER OFF.
28) Turn on your phone.
29) Tap on the icon of SuperSU to activate it.
30) Download an app like "Root Check" or similar, to verify if phone is rooted.
is there a stock recovery available that i can flash in case i want to reset my phone or pull ota updates without flashing any zip files? i think the ota.zip that vernee released does not include a recovery, does it?
EDIT: there might be a possibility to extract recovery.img from the phone over adb. the problem is that you need to be rooted to do this but i am not, so i will leave a link down below. could someone who rooted his apollo try to get the recovery.img ?
https://android.stackexchange.com/questions/132314/can-we-backup-the-stock-recovery-img-in-any-way
julius1504 said:
is there a stock recovery available that i can flash in case i want to reset my phone or pull ota updates without flashing any zip files? i think the ota.zip that vernee released does not include a recovery, does it?
Click to expand...
Click to collapse
You are right. There is no recovery.img inside the OTA update zip
I have made a custom recovery by myself. The pictures are the proof that my twrp works well.
This twrp method does not affect the original stock recovery.
Before to start the twrp by Fastboot, make sure you have installed the OTA 201701 update zip onto your Apollo.
Hello, the method works very well ....
Thank you very much :laugh:
Hello, Cleopatra
Just a couple of questions....
1.- In this TWRP "instalation" you ask adb to boot from an image is not in the telephone but in your PC? (Please, confirm)
2.- Instad using SuperSu for root, can Magisk take its place? Magisk seems to be a very promisory system.
Thank you very much. I do not have my piedce already to check myself. That is the reason of item 2.-
jrotaetxe said:
Hello, Cleopatra
Just a couple of questions....
1.- In this TWRP "instalation" you ask adb to boot from an image is not in the telephone but in your PC? (Please, confirm)
2.- Instad using SuperSu for root, can Magisk take its place? Magisk seems to be a very promisory system.
Thank you very much. I do not have my piedce already to check myself. That is the reason of item 2.-
Click to expand...
Click to collapse
Your first question :
Fastboot to boot the recovery.img (TWRP) inside your PC. I confirm it.
Your second question :
Regarding Magisk, please keep in mind that you need also "phh's SuperUser" and "xposed-v87.0-sdk23-topjohnwu.zip".
Very soon I will have the Vernee Apollo in my hands to do all kinds of tests without asking anyone to be the test case.
The first most important target is to make a stock firmware flashable by SP Flash Tool.
The second most important target is to make a twrp flashable by SP Flash Tool.
Regards
We are in the same situation...
Waiting
Graccie tanto!!!
Stock firmware in Flash Tool
Cleopatra Bianchi said:
Your first question :
Fastboot to boot the recovery.img (TWRP) inside your PC. I confirm it.
Your second question :
Regarding Magisk, please keep in mind that you need also "phh's SuperUser" and "xposed-v87.0-sdk23-topjohnwu.zip".
Very soon I will have the Vernee Apollo in my hands to do all kinds of tests without asking anyone to be the test case.
The first most important target is to make a stock firmware flashable by SP Flash Tool.
The second most important target is to make a twrp flashable by SP Flash Tool.
Regards
Click to expand...
Click to collapse
I look forward to flash the stock firmware in Flash Tool. I foolishly made a phone of brick, all backups lost. Thanks!
UPDATE 01
UPDATE 01
Carliv Touch Recovery 5.7.3
The touchscreen does NOT works.
BUT :
You are able to move between the options by "volume up" and "volume down" buttons.
You are able to select any option by "power" button.
Flash it by SP Flash Tool (load the scatter file inside rar and select "Download Only" option).
On an inspired idea by Marsapa (Androidiani forum).
Download link : You will find it on Needrom
STEPS TO UNBRICK THE VERNEE APOLLO :
Make sure you have the "full_k15ta_a-ota-XXX.zip" onto your microSD.
Make sure you have "UPDATE-SuperSU-v2.79-20161211114519.zip" onto your microSD.
SuperSU.zip and BusyBox.zip link :
http://www.mediafire.com/file/g4hubpximcn2g1b/LAST_SU-BU.rar
1) Flash the recovery.img with SP Flash Tool.
2) Press "volume up" and "power" buttons simultaneously.
3) Select the first line with "volume up" button.
4) Press "volume down" to enter into Carliv 5.7.3.
5) Press "volume down" button and select "install zip".
6) Press "power" button.
7) Select "Choose zip from ExtraSD" and press "power" button.
If you do not find anything on ExtraSD, select "Choose zip from Sdcard".
8) Select "full_k15ta_a-ota-1482441792.zip" and press "power" button.
9) Select "Yes - Install full_k15ta_a-ota-1482441792.zip".
10) Press "power" button to start the flash of OTA zip.
You will see the following lines appear in sequence :
Finding update package...
Opening update package...
Installing update...
Target:
alps/full_15ta_a/k15ta_a:6.0/MRA58K/1482438895:user/release-keys
Patching system image unconditionally...
Verifying the updated system image...
Verified the updated system image.
Patching custom image unconditionally...
Verifying the updated custom image...
Verified the updated custom image.
Patching custom image unconditionally...
Verifying the updated custom image...
Verified the updated custom image.
start to update general image
start to update loader image
start to update main loader image
Install from sdcard complete.
11) Select "<<<< Go Back <<<<" and press "power" button.
12) Press "volume down" button and select "install zip".
13) "Choose zip from Sdcard".
14) Select "UPDATE-SuperSU-v2.79-20161211114519.zip" and press "power" button.
15) Select "Yes - Install UPDATE-SuperSU-v2.79-20161211114519.zip".
16) When "Install from sdcard complete", "<<<< Go Back <<<<".
17) Select "Reboot Phone".
18) Select "No".
19) Be patient. Your Apollo will reboot twice.
20) Enjoy with your unbricked Vernee Apollo.
21) Settings-->About phone-->tap 7 times on Build number.
22) Developer options-->enable OEM unlocking and USB debugging.
23) Tap on SuperSU icon to activate it (New user).
Cleopatra Bianchi said:
The first most important target is to make a stock firmware flashable by SP Flash Tool.
The second most important target is to make a twrp flashable by SP Flash Tool.
Regards
Click to expand...
Click to collapse
Agree in both
Regards
Where can I find the update zip ?
How to enter to Custom RECOVERY?
Hello
I tried two recovery
TWRP and Carliv Touch Recovery
everything is ok - Backup and Restore
But how enter to recovery?
Button "-" with "power" dont work
Button "+" with "power" and when choose Recovery - dont work
Stuck on trying to install recovery. Downloaded everything.
greeneyez15o said:
Where can I find the update zip ?
Click to expand...
Click to collapse
http://www.vernee.cc/downloads-apollo.html
There are the two next zip :
full_k15ta_a-ota-1482441792.zip
full_k15ta_a-ota-1484567521.zip
The k15ta_a is typical of Vernee Apollo Helio X25
Sracer85 said:
Hello
I tried two recovery
TWRP and Carliv Touch Recovery
everything is ok - Backup and Restore
But how enter to recovery?
Button "-" with "power" dont work
Button "+" with "power" and when choose Recovery - dont work
Click to expand...
Click to collapse
I see you on 4pda.
1) "volume plus" + "power" simultaneously.
2) select the first line with "volume plus".
3) press "volume minus" to enter into recovery.
I suggest you to install "Quick Reboot (Root)" apk to enter more quickly into recovery mode.
stock rom flashable by SP Flash Tool
At the next thread you will find the stock rom flashable by SP Flash Tool :
https://forum.xda-developers.com/general/rooting-roms/vernee-apollo-helio-x25-roms-fix-t3561019
UPDATE 02
UPDATE 02
TWRP 3.0.3
Unfortunately the touch screen does NOT work.
Then, you will have to choose two different methods :
1) Flash the twrp 3.0.3 and use an OTG mouse.
2) Boot the twrp by Fastboot mode (please read carefully the steps at the first post).
Download link :
http://www.mediafire.com/file/274vwdo2xhm6aqm/Apollo_X25-twrp_3.0.3.rar
Cleo.
Think will be good you "edit" the first post and include this update. Thus yo do not obligue a reader to dive the whole thread to finf the most updated of your achievements...
Congrats and thank you. having TWRP for the phone is a huge step.
Regards
i just wanna say thanks alot
its working like magic on my Vernee Apollo
However, im still on
21) Tap Swipe to Backup.
took around 40 mins to Backup
i'll keep you posted of what happens
---------- Post added at 06:57 PM ---------- Previous post was at 06:12 PM ----------
Its all working just fine
Cleopatra :angel: what you did her is just beyond amazing
why666me said:
i just wanna say thanks alot
its working like magic on my Vernee Apollo
However, im still on
21) Tap Swipe to Backup.
took around 40 mins to Backup
i'll keep you posted of what happens
Click to expand...
Click to collapse
WHAT ??? 40 minutes to make a backup ???
WAIT please ! Probably you are doing it wrong.
Questions :
1) Do you have selected ONLY Nvram, Boot, System and Data ?
2) What kind of microSD are you using ? Speed class 6 or speed class 10 ?
NOTE:
this method is only for Honor6X and GR5-2017 Devices.
I am not responsable for any other damage:
**losing serial number,imei, or any other problem.**
this one will force to unlock bootloader code and FRP,and all your data will be erased.
it will help you to debrand to other regions easily.
************************************************************
you need at first this files:
-HL2BLNTMBD001051*
-HONOROEMINFO
-DRIVER HANDSET*
-IMAGE DOWNLOADER*
----------------------
1-Preparing files:
-exrtract all files below?
-then install driver :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-once installed open IDT and follow the steps :
-then browse in folder HL2BLNTMBD001051 and select :
----------------------
2-In the side of the phone :
-you have to open your phone to work on the motherboard :
-you need an object to touch the testpoints of the motherboard (Everything who's metallic can serve you)
-make sur that you press testpoints, then hold and put usb cable in the same time:
-[if phone turn on, turn it off and make sur that you contact between testpoints]
-you will see in the computer Your device is detected as(Huawei USB COM1.0)
if not, reinstall driver and reboot the computer.
----------------------
3-Runnig the work :
-now click on (play) button in IDT. [ you will see that the progression has started].
-once progression finished,go to the next step(4)
-if it fail..don't panic.
just flash SYSTEM.img manually with fastboot (system.img he is in fastbootimage folder).
----------------------
4-finishing:
-now your phone start working as factory mode,
reboot fastboot and flash any oeminfo file given or of your choice.
-once again done.
the last thing to do is update your firmware with eRecovery or by dload method (launching software upgrade app)
----------------------
Done :good: say thanks?
player615 said:
NOTE:
this method is only for Honor6X and GR5-2017 Devices.
I am not responsable for any other damage:
**losing serial number.or any other problem.**
this one will force to unlock bootloader code and FRP,and all your data will be erased.
it will help you to debrand to other regions easily.
************************************************************
you need at first this files:
-HL2BLNTMBD001051*
-HONOROEMINFO
-DRIVER HANDSET*
-IMAGE DOWNLOADER*
----------------------
1-Preparing files:
-exrtract all Zipped files below.
-then install driver :
-once installed open IDT and follow the steps :
-then browse in folder HL2BLNTMBD001051 and select :
----------------------
2-In the side of the phone :
-you have to open your phone to work on the motherboard :
-you need an object to touch the testpoints of the motherboard (Everything who's metallic can serve you)
-make sur that you press testpoints, then hold and put usb cable in the same time:
-[if phone turn on, turn it off and make sur that you contact between testpoints]
-you will see in the computer Your device is detected as(Huawei USB COM1.0) if not, reinstall driver and reboot the computer.
----------------------
3-Runnig the work :
-now click on (play)button in IDT.[ you will see that the progression has started].
-once progression finished,go to the next step(4)
-if it fail..don't panic.just flash SYSTEM.img manually with fastboot(system.img he is in fastbootimage folder)
----------------------
4-finishing:
-now your phone start working as factory mode, reboot fastboot and flash any oeminfo file given or of your choice.
-once again done.the last thing to do is update your firmware with eRecovery or by dload method (launching software upgrade app)
----------------------
Done :good:
Click to expand...
Click to collapse
Excellent guide. It will help a lot if people who are no longer under warranty (majority of us) and Don't mind Opening their phones. Great work. ???
Mannan Qamar said:
Excellent guide. It will help a lot if people who are no longer under warranty (majority of us) and Don't mind Opening their phones. Great work.
Click to expand...
Click to collapse
Thank you bro,?
player615 said:
NOTE:
this method is only for Honor6X and GR5-2017 Devices.
I am not responsable for any other damage:
**losing serial number.or any other problem.**
this one will force to unlock bootloader code and FRP,and all your data will be erased.
it will help you to debrand to other regions easily.
************************************************************
you need at first this files:
-HL2BLNTMBD001051*
-HONOROEMINFO
-DRIVER HANDSET*
-IMAGE DOWNLOADER*
----------------------
1-Preparing files:
-exrtract all Zipped files below.
-then install driver :
-once installed open IDT and follow the steps :
-then browse in folder HL2BLNTMBD001051 and select :
----------------------
2-In the side of the phone :
-you have to open your phone to work on the motherboard :
-you need an object to touch the testpoints of the motherboard (Everything who's metallic can serve you)
-make sur that you press testpoints, then hold and put usb cable in the same time:
-[if phone turn on, turn it off and make sur that you contact between testpoints]
-you will see in the computer Your device is detected as(Huawei USB COM1.0) if not, reinstall driver and reboot the computer.
----------------------
3-Runnig the work :
-now click on (play)button in IDT.[ you will see that the progression has started].
-once progression finished,go to the next step(4)
-if it fail..don't panic.just flash SYSTEM.img manually with fastboot(system.img he is in fastbootimage folder)
----------------------
4-finishing:
-now your phone start working as factory mode, reboot fastboot and flash any oeminfo file given or of your choice.
-once again done.the last thing to do is update your firmware with eRecovery or by dload method (launching software upgrade app)
----------------------
Done :good:
Click to expand...
Click to collapse
Thanks brother
Diego Intriago said:
Thanks brother
Click to expand...
Click to collapse
You are welcome?
WOW
thanks lot dear you give new life of my phone that was dead over a year. its really works
:fingers-crossed::fingers-crossed::fingers-crossed:
mirzafaisal said:
thanks lot dear you give new life of my phone that was dead over a year. its really works
:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Your welcome?
Thank you very muchhhhh. I wait 14 month to fix this. I love youu.
It will unlock bootloader?
Mohit0033 said:
It will unlock bootloader?
Click to expand...
Click to collapse
yes
i need you help
Hi, I do the steps but when it reboots, it goes into fastboot mode or downloaded in step 3, what can I do? How do I install system manually?
thanks phone back to work again
BUT HOW TO WRITE OEMINFO FROM FASTBOOT
iguana22 said:
Hi, I do the steps but when it reboots, it goes into fastboot mode or downloaded in step 3, what can I do? How do I install system manually?
Click to expand...
Click to collapse
Flash it with fastboot i puted in guide the location of this partition..
ahwak said:
thanks phone back to work again
BUT HOW TO WRITE OEMINFO FROM FASTBOOT
Click to expand...
Click to collapse
Like others commands recovery or boot... Just change the name of partition that you want to flash
Fastboot flash oeminfo ....
player615 said:
Flash it with fastboot i puted in guide the location of this partition..
Click to expand...
Click to collapse
if I flash the system that is in the folder fasbootimage with adb it says it completes but it re-enters dowload mode when it restarts my cell phone is an honor 6x bln l21 what can I do?
iguana22 said:
if I flash the system that is in the folder fasbootimage with adb it says it completes but it re-enters dowload mode when it restarts my cell phone is an honor 6x bln l21 what can I do?
Click to expand...
Click to collapse
Repeat flash steps then flash system and do factory reset
player615 said:
Repeat flash steps then flash system and do factory reset
Click to expand...
Click to collapse
hello I did all the steps again and at the end factory reset and it stays again in fastboot can I install the app from the edl mode?
iguana22 said:
hello I did all the steps again and at the end factory reset and it stays again in fastboot can I install the app from the edl mode?
Click to expand...
Click to collapse
If you can boot erecovery just update with Otg or use sdcard, system partition don't needed at all...
player615 said:
If you can boot erecovery just update with Otg or use sdcard, system partition don't needed at all...
Click to expand...
Click to collapse
I can not enter the Erecovery mode Just enter the recovery mode with the USB cable connected to the PC and the button upwards will restart continuously maybe that's why? and arrives at 5 the update by sd when I press the 3 buttons and fail
player615 said:
If you can boot erecovery just update with Otg or use sdcard, system partition don't needed at all...
Click to expand...
Click to collapse
could install the twrp and then install some rom or custom rom? which one could I use?
Requirements:
1. Unlocked Bootloader
2. You need ramdisk of current version
3. Download Stock Firmware Online firmware database ⋆ TEAM MT Developers
4. Look for the brand and model and download the update.zip
5. Use the Huawei Extractor to extract the ramdisk.img
6. Zip looks like this "http://update.dbankcdn.com/TDS/data/files/px/sxx/Gxxx/gxxx/vxxxxx/f1/full/update.zip"
7. Download TWRP and Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip from here.
8. AOSP 10.0 ROM from here
Instructions:
1.. Check correct version and download stock firmware and extract RAMDISK.img accordingly from above.
2.. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
3. Boot into Fastboot Mode.
Fastboot:
4.. Flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
5.. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. You can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
6. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
7. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
8. Reboot -> Bootloader (not System!!!)
Fastboot:
9. fastboot flash ramdisk RAMDISK.img
10. fastboot flash system system-quack-arm64-aonly-gapps.img
11. fastboot reboot
If you get stuck in a bootloop while it boots, go backin TWRP and format your data. Boot again.
Features:
Gapps included, pre installed Root by SU, Dark Mode, Substratum works like charm. Fingerprint works.
Bugs:
No Bugs
IMPORTANT Note :
To use fast charging enable it in Settings -> Phh Treble Setting -> Huawei features -> Huawei fast charge -> Mid-fast
To fix display blur enable it in Settings -> Phh Treble Setting -> Huawei features -> Enable blurry UI workaround
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sadiqkarur said:
Requirements:
1. Unlocked Bootloader
2. You need ramdisk of current version
3. Download Stock Firmware Online firmware database ⋆ TEAM MT Developers
4. Look for the brand and model and download the update.zip
5. Use the Huawei Extractor to extract the ramdisk.img
6. Zip looks like this "http://update.dbankcdn.com/TDS/data/files/px/sxx/Gxxx/gxxx/vxxxxx/f1/full/update.zip"
7. Download TWRP and Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip from here.
8. AOSP 10.0 ROM from here
Instructions:
1.. Check correct version and download stock firmware and extract RAMDISK.img accordingly from above.
2.. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
3. Boot into Fastboot Mode.
Fastboot:
4.. Flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
5.. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. You can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
6. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
7. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
8. Reboot -> Bootloader (not System!!!)
Fastboot:
9. fastboot flash ramdisk RAMDISK.img
10. fastboot flash system system-quack-arm64-aonly-gapps.img
(or AOSP 10.0 v209)
11. fastboot reboot
If you get stuck in a bootloop while it boots, go backin TWRP and format your data. Boot again.
Features:
Gapps included, pre installed Root by SU, Dark Mode, Substratum works like charm.
Bugs:
Fingerprint issue.
Click to expand...
Click to collapse
Additional option to point 5:
If your stock rom or custom rom starts you can boot into twrp by typing adb reboot revovery
Be sure your device is autohorized like this:
c:\adb>adb devices
List of devices attached
82xyzabc device
Is it normal that in the screenshots, the icons are pixelized? And what was your tablet model ? Mine is c431b239.
sasuke988 said:
Is it normal that in the screenshots, the icons are pixelized? And what was your tablet model ? Mine is c431b239.
Click to expand...
Click to collapse
Yes, it is normal in screenshots and my model is bah2-l09c636
This method works on everymodel
1. Unlocked Bootloader
2. You need ramdisk of current version
3. Download Stock Firmware Online firmware database ⋆ TEAM MT Developers
4. Look for the brand and model and download the update.zip
5. Use the Huawei Extractor to extract the ramdisk.img
6. Zip looks like this "http://update.dbankcdn.com/TDS/data/files/px/sxx/Gxxx/gxxx/vxxxxx/f1/full/update.zip" ==> I can't extract ramdisk.img from update.zip. I have this error:
alex_37_Spain said:
1. Unlocked Bootloader
2. You need ramdisk of current version
3. Download Stock Firmware Online firmware database ⋆ TEAM MT Developers
4. Look for the brand and model and download the update.zip
5. Use the Huawei Extractor to extract the ramdisk.img
6. Zip looks like this "http://update.dbankcdn.com/TDS/data/files/px/sxx/Gxxx/gxxx/vxxxxx/f1/full/update.zip" ==> I can't extract ramdisk.img from update.zip. I have this error:
Click to expand...
Click to collapse
In the huawei extractor tool go to settings and uncheck 1. Verify header checksum
2. Verify file checksum
Thank you!!!!!! I will try it when I am at home. I am very excited about to change my MediaPad m5 lite rom
Is it compatible with m5 lite 8"?
Olexander said:
Is it compatible with m5 lite 8"?
Click to expand...
Click to collapse
the twrp probably not, but you can try.
May be this will help https://www.filehosting.org/file/details/764535/twrp-kirin.img
Any feedback about this rom? Any bug?
I am scared to try this ROM without reports.....
I tried it. Everything but sound worked. (BT sound worked, but speakers not)
It is a shame that Huawei has not upgraded this tablet...... Huawei: never again
hello developer.
my device model is BAH2-L09.
and CPU using Hisilcon Kirin 659.
if i download this ROM and install, that is work..?
sorry for question .... T^T;
@sadiqkarur
any updates on this ROM?
fingerprint reader and speakers are working now?
sakis_the_fraud said:
@sadiqkarur
any updates on this ROM?
fingerprint reader and speakers are working now?
Click to expand...
Click to collapse
Everything Fixed. download new update
kulio97 said:
hello developer.
my device model is BAH2-L09.
and CPU using Hisilcon Kirin 659.
if i download this ROM and install, that is work..?
sorry for question .... T^T;
Click to expand...
Click to collapse
yes will work
Hi there. I'm looking at one of these tablets as a replacement device for a now very out of date Lenovo Yoga...
Will this ROM work with BAH2-W19? The 4G / 64G UK model?
sound quality
is the speaker sound quality similar to original?
Hello Guys today we are going to see how to unlock the bootloader of realme 5pro and installation of TWRP and Custom Roms
PROCESS OF UNLOCKING THE BOOTLOADER
1. Download all the files given in the below link in pc and keep in one folder
https://drive.google.com/drive/folders/1MUEJkl25gL7zUPXNKFx_I5HLHyfCAzz7?usp
2. Copy the in depth apk file in phone and install as normal apk
3. Open the apk click on submit application and wait for 10 to 15min
4. Next once it shows success in that app goto settings then developer options and turn on usb debugging
5. Then in pc first install adb-setup-1.4.3
6. Then copy this minimal_adb_fastboot_1.4.3_portable zip file in one folder then extract the zip file
7. After completing of extraction copy the twrp and vbmeta files both into the minimal_adb_fastboot_1.4.3_portable extracted folder
8. Next connect your mobile to pc and you can see command prompt here in that folder it will open cmd prompt there type “fastboot devices” and press enter to verify that your device is being detected
9. In CMD type- “fastboot flashing unlock” and press enter to unlock the bootloader.
10. Now on phone, a message like in below image will appear. In phone select the “unlock the bootloader” menu by pressing the volume button down and then press the “power button” to finally unlock the bootloader of phone.
11. After pressing the power button your phone will boot into Color OS by wiping phone and bootloader is now unlocked.
your device is successfully unlocked boot-loader
STEPS TO INSTALL TWRP RECOVERY
1. Power off the phone then press and hold the VOLUME DOWN button with POWER button for 3 seconds and your phone will be booted into bootloader mode.
2. Open the same minimal_adb_fastboot_1.4.3_portable zip extracted folder
3. In cmd command prompt type fastboot devices
4. Copy the command and paste in the cmd fastboot flash recovery twrp_RMX1971-3.1.1.img
5. Done now in phone press volume up or down button to goto recovery.
STEPS TO FLASH CUSTOM ROMS
1. Copy the full ozip file of realme ui c.05 or other build in sdcard for safety if any issues occur we can go back to realme ui and can try again later
2. Copy the downloaded rom in sdcard in one folder along with gapps
3. Next boot in twrp and goto wipe section then select “system” “data” “vendor” cache” devlink” and swipe to wipe
4. Once that is done, tap on back and goto main page of twrp
5. Tap on install and select sdcard as location and select the rom file and flash
6. Once flashing bar completed tap on reboot to system
7. If device is in boot loop hold the volume down button it will take to twrp. There in twrp tap on wipe then tap on format data and type YES then once done tap on reboot system hola you are in custom rom
IF DEVICE STUCK ON BOOT IMAGE DESTROED DON’T PANIC USE BELOW COMMAND
“fastboot flash vbmeta vbmeta.img”
Again device in bootloop flash permisssiver zip file from the link
STEPS TO FLASH CUSTOM ROMS
2. Copy the downloaded rom in sdcard in one folder along with gapps
3. Next boot in twrp and goto wipe section then select “system” “data” “vendor” cache” devlink” and swipe to wipe
4. Once that is done, tap on back and goto main page of twrp
5. Tap on install and select sdcard as location and select the rom file and flash
6. Once flashing bar completed tap on reboot to system
Click to expand...
Click to collapse
I Unlocked Bootloader, installed twrp and rooted the device using this guide, " https://forum.xda-developers.com/re...de-newbie-resource-thread-bootloader-t3995285 ".
Now I have rooted Realme 5 Pro RMX 1971 with Realmeos Build c.07.
I downloaded Evolution X 4.7 Rom zip file and followed the instructions given in thread to flash zip file. But after flashing when I tried to reboot in system, it gave me a message on swipe screen that OS is not installed but still I swiped to boot in system. My device tried to boot a couple of time and ended up in fastboot again. Fortunately I had already made backup so I restored my backup.
Hence again I am on Rooted Relame 5 pro RMX1971 with realmeos build c.07.
What wrong did I do?
Do format data in twrp.format is not wiping data
waqar bukhari said:
I Unlocked Bootloader, installed twrp and rooted the device using this guide, " https://forum.xda-developers.com/re...de-newbie-resource-thread-bootloader-t3995285 ".
Now I have rooted Realme 5 Pro RMX 1971 with Realmeos Build c.07.
I downloaded Evolution X 4.7 Rom zip file and followed the instructions given in thread to flash zip file. But after flashing when I tried to reboot in system, it gave me a message on swipe screen that OS is not installed but still I swiped to boot in system. My device tried to boot a couple of time and ended up in fastboot again. Fortunately I had already made backup so I restored my backup.
Hence again I am on Rooted Relame 5 pro RMX1971 with realmeos build c.07.
What wrong did I do?
Click to expand...
Click to collapse
when ever happens like that remember always go to twrp or any other recovery in wipe section tap on format data and type yes and swipe then reboot. it will dam sure will boot in ur desired rom
I am stuck at sending a .img file.
what I am doing wrong?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
longnvuet said:
I am stuck at sending a .img file.
what I am doing wrong?
View attachment 5235259
Click to expand...
Click to collapse
is the name is correct what you have in cmd
can you make a video of this? btw im a beginner and i can't understand it thank youuuu
Hello I'm new to this, so can you please tell me if the steps are same for the latest version of realme 5 pro (RMX1971 11 C. 14).
Hello can I ask if I can still use the in depth test APK file in android 11 realme 5 pro. Because I want to unlock the bootloader and change my phone's rom. Thanks in advance.