Welcome to my first post, hope this can help many people :victory:.
Foreword
This is based on my own experimentation and I do not take responsibility for KG blocked phones or any other issue related to the topic of this post.
WARNING
Your Samsung MUST be OEM unlocked and you MUST have the firmware of the same country of your SIM to avoid blocking the KG and preventing the phone from booting and using the recovery.
STEPS
1. Open ODIN
2. Put your phone in DOWNLOAD mode either by holding volume up and down while connecting the USB-C port or booting into your system then using ADB with the command
Code:
ADB reboot download
.
3.Select the vb meta on the AP option and flash it.
4.Before flashing have in mind that you CANNOT let the phone boot normally after flashing, so be prepared to open the recovery using volume up+power button. Either deactivate the auto reboot option in ODIN or be fast with your fingers just don't let it boot into the system as this will cause Knox to restore the stock recovery and the progress will be lost.
5. Select the TWRP on AP and flash it.
5. In TWRP go to advanced and select the file manager then access the /data/knox/ folder.
6.Delete the /data/knox/ folder.
-Format data on TWRP
-flash magisk 20.4 (optional, not tested)
-flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip module (optional, not tested)
7.Boot into the system.
8.YOU DID IT! now you should be able to boot again into twrp if you turn off and press volume up+power button.
https:// gofile. io/d/sf8xuv by Revanth Strakz
https:// gofile. io/d/lHAKhY vbmeta
I'm really sorry that I can't post the link normally because I am prevented by XDA rules of posting so it's up to you to trust me on the link, if any mod is seeing this please help me out.
If you have any issue please notify me I will respond as fast as I can!
TWRP
Sotiras said:
Welcome to my first post, hope this can help many people :victory:.
Foreword
This is based on my own experimentation and I do not take responsibility for KG blocked phones or any other issue related to the topic of this post.
WARNING
Your Samsung MUST be OEM unlocked and you MUST have the firmware of the same country of your SIM to avoid blocking the KG and preventing the phone from booting and using the recovery.
STEPS
1. Open ODIN
2. Put your phone in DOWNLOAD mode either by holding volume up and down while connecting the USB-C port or booting into your system then using ADB with the command
Code:
ADB reboot download
.
3.Select the TWRP on the AP option.
4.Before flashing have in mind that you CANNOT let the phone boot normally after flashing, so be prepared to open the recovery using volume up+power button. Either deactivate the auto reboot option in ODIN or be fast with your fingers just don't let it boot into the system as this will cause Knox to restore the stock recovery and the progress will be lost.
5. In TWRP go to advanced and select the file manager then access the /data/knox/ folder.
6.Delete the /data/knox/ folder.
7.Boot into the system.
8.YOU DID IT! now you should be able to boot again into twrp if you turn off and press volume up+power button.
If you have any issue please notify me I will respond as fast as I can!
Click to expand...
Click to collapse
Hi !!! TWRP where can I find it ??? Thanks !!!
Sotiras said:
Welcome to my first post, hope this can help many people :victory:.
Foreword
This is based on my own experimentation and I do not take responsibility for KG blocked phones or any other issue related to the topic of this post.
WARNING
Your Samsung MUST be OEM unlocked and you MUST have the firmware of the same country of your SIM to avoid blocking the KG and preventing the phone from booting and using the recovery.
STEPS
1. Open ODIN
2. Put your phone in DOWNLOAD mode either by holding volume up and down while connecting the USB-C port or booting into your system then using ADB with the command
Code:
ADB reboot download
.
3.Select the TWRP on the AP option.
4.Before flashing have in mind that you CANNOT let the phone boot normally after flashing, so be prepared to open the recovery using volume up+power button. Either deactivate the auto reboot option in ODIN or be fast with your fingers just don't let it boot into the system as this will cause Knox to restore the stock recovery and the progress will be lost.
5. In TWRP go to advanced and select the file manager then access the /data/knox/ folder.
6.Delete the /data/knox/ folder.
7.Boot into the system.
8.YOU DID IT! now you should be able to boot again into twrp if you turn off and press volume up+power button.
https:// gofile. io/d/sf8xuv by Revanth Strakz
I'm really sorry that I can't post the link normally because I am prevented by XDA rules of posting so it's up to you to trust me on the link, if any mod is seeing this please help me out.
If you have any issue please notify me I will respond as fast as I can!
Click to expand...
Click to collapse
[email protected] said:
Hi !!! TWRP where can I find it ??? Thanks !!!
Click to expand...
Click to collapse
I just updated the post with a link, I got it from Telegram from a dev and I tested it myself, I haven't found any bugs if you follow the steps correctly. Good luck, my friend. If you have any issue please reply to this message.:highfive:
Sotiras said:
I just updated the post with a link, I got it from Telegram from a dev and I tested it myself, I haven't found any bugs if you follow the steps correctly. Good luck, my friend. If you have any issue please reply to this message.:highfive:
Click to expand...
Click to collapse
I can't find the file!!!The link does not work!!!
[email protected] said:
I can't find the file!!!The link does not work!!!
Click to expand...
Click to collapse
Just delete the spaces between the link. They are there to not be detected as an actual link because I don't have enough posts to be let to post links but is super easy to just see the extra spaces I put and delete them.
Sotiras said:
Just delete the spaces between the link. They are there to not be detected as an actual link because I don't have enough posts to be let to post links but is super easy to just see the extra spaces I put and delete them.
Click to expand...
Click to collapse
Thanks !!! I managed to download the file, in the next few days I'll try it then I'll let you know how it went. For now thanks !!!
Does not work
Sotiras said:
I just updated the post with a link, I got it from Telegram from a dev and I tested it myself, I haven't found any bugs if you follow the steps correctly. Good luck, my friend. If you have any issue please reply to this message.:highfive:
Click to expand...
Click to collapse
Hi !!! So I performed these steps:
1_ installed the latest Italian firmware
2_I made the TWRP flash that you indicated to me
3_manual restart volume + and power button and it returns to me as well as in the photo that attached. Where am I wrong ???
I have tried 3 times
[email protected] said:
Hi !!! So I performed these steps:
1_ installed the latest Italian firmware
2_I made the TWRP flash that you indicated to me
3_manual restart volume + and power button and it returns to me as well as in the photo that attached. Where am I wrong ???
I have tried 3 times
Click to expand...
Click to collapse
From what I can infer, the problem is with an unpatched vbmeta. you need to flash the vbmeta in odin as well as TWRP on AP. Again can't really post the link so delete the spaces. https:// gofile. io/d/lHAKhY . The problem in theory should be solved.
Tell me how did it go when you're done so I can update the guide. Good luck!
Sotiras said:
From what I can infer, the problem is with an unpatched vbmeta. you need to flash the vbmeta in odin as well as TWRP on AP. Again can't really post the link so delete the spaces. https:// gofile. io/d/lHAKhY . The problem in theory should be solved.
Tell me how did it go when you're done so I can update the guide. Good luck!
Click to expand...
Click to collapse
Thanks !!! I will keep you informed on the progress !!! Thanks a lot !!!
Method working!!!
Sotiras said:
From what I can infer, the problem is with an unpatched vbmeta. you need to flash the vbmeta in odin as well as TWRP on AP. Again can't really post the link so delete the spaces. https:// gofile. io/d/lHAKhY . The problem in theory should be solved.
Tell me how did it go when you're done so I can update the guide. Good luck!
Click to expand...
Click to collapse
These are steps to take to root:
1-install latest firmware
2-flash vbmeta with odin with AP
3-flash Revanth_twrp_m31.tar with odin with AP
4-restart in twrp (no normal)
5-delete data / knox folder
6-format data
7-flash magisk 20.4
8-flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip module
9-normal restart
Now you can update the guide because it works !!! Thanks !!!
:good::good::good::good::good::good:
[email protected] said:
These are steps to take to root:
1-install latest firmware
2-flash vbmeta with odin with AP
3-flash Revanth_twrp_m31.tar with odin with AP
4-restart in twrp (no normal)
5-delete data / knox folder
6-format data
7-flash magisk 20.4
8-flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip module
9-normal restart
Now you can update the guide because it works !!! Thanks !!!
:good::good::good::good::good::good:
Click to expand...
Click to collapse
Nice, can you check if you can use camera2 api features or google camera properly, Thanks
Badr0 said:
Nice, can you check if you can use camera2 api features or google camera properly, Thanks
Click to expand...
Click to collapse
Yes, everything works normal
[email protected] said:
Yes, everything works normal
Click to expand...
Click to collapse
do you know any way i can record calls with root and without root ???, i can't see the built in recorder in the phone app settings i think it doesn't work in my country, it's a very important feature for me, thank you bro !
Call recorder
Badr0 said:
do you know any way i can record calls with root and without root ???, i can't see the built in recorder in the phone app settings i think it doesn't work in my country, it's a very important feature for me, thank you bro !
Click to expand...
Click to collapse
Native, I believe only Indian software has incorporated call recorder but with root you have two apps. In magisk modules: Axet'Call Recorder free and Call Recorder-SKVALEX which is paid. Good luck !!!
[email protected] said:
Native, I believe only Indian software has incorporated call recorder but with root you have two apps. In magisk modules: Axet'Call Recorder free and Call Recorder-SKVALEX which is paid. Good luck !!!
Click to expand...
Click to collapse
Thanks, so i've tried call recorder-skvalex it worked but the battery consumption increased while screen off, removed it and back to normal, it's maybe because it's running in the background or something, so there isn't a way to make other call recorder apps like Cube Acr work with root or without by turning them to system apps for example, i've heard of that somewhere but can't find a tutorial or an explanation.
Badr0 said:
Thanks, so i've tried call recorder-skvalex it worked but the battery consumption increased while screen off, removed it and back to normal, it's maybe because it's running in the background or something, so there isn't a way to make other call recorder apps like Cube Acr work with root or without by turning them to system apps for example, i've heard of that somewhere but can't find a tutorial or an explanation.
Click to expand...
Click to collapse
Hi !!! I can tell you that there is an application called Lucky_Patcher which is very likely to transform a normal application into a system application, on the net there are tutorials with all the explanations.
[email protected] said:
Hi !!! I can tell you that there is an application called Lucky_Patcher which is very likely to transform a normal application into a system application, on the net there are tutorials with all the explanations.
Click to expand...
Click to collapse
Thanks, so my point is, if systemise cube acr or another call recorder app will it work directly or i'll need to perform some other configurations ?
Badr0 said:
Thanks, so my point is, if systemise cube acr or another call recorder app will it work directly or i'll need to perform some other configurations ?
Click to expand...
Click to collapse
I can't help you with this, I'm sorry !!!
[email protected] said:
I can't help you with this, I'm sorry !!!
Click to expand...
Click to collapse
Nothing to be sorry about, Thank you
Badr0 said:
Nothing to be sorry about, Thank you
Click to expand...
Click to collapse
:good::good::good:
Related
The disclaimer is attached to the script file. When you open them, a disclaimer will show up with 2 choices: accept them or exit.
Hi guys
I'm here for give you a batch script (with repo) that works on all windows system without installing .net framework or other software!
The only thing that you need is WinRAR 5.30 or up! Otherwise you will aren't able to unpack all the folder.
I've made this because i see some people that wants to mod his One X, but they can't due to unknown errors with some tools.
This tool will do these functions:
*Bootloader Unlocker/Locker!
*Fastboot Recharger!
*Helps to root your device!
*Recovery Flasher! (New layout and Old layout, no need to download anything!)
*Guides to flash a custom rom!
*boot.img extractor and autoflasher!
*CID/MID Reader!
*Fastboot Emergency Recovery!
*Some accurates guides! (provided by @teemo)
*Integrated FAQ and How To!
*Fastboot&ADB status Connection Verifer!
*And much much more! Stay tuned!
Special contributors:
@teemo for providing all stuff needed like recoveries, guides and others.
Downloads and repo:
MEGA LINKS:
V1.0 Stable: https://mega.nz/#!NddVkTTb!aINZPwACwHgAYgpA4L8tR86dobJ9zGuGpY-5In3YE7E
Beta3: https://mega.nz/#!AFkEFJIL!jI3EJtJhbdiT_Q8I7tb3qnDINNj3os8CYNtB_htHGvA
Beta2: https://mega.nz/#!MUlSgZwI!SPaAKOkgt-xCHyzMwb6rJmzW0mQY66N8L87S5JbgZVs
Beta1: https://mega.nz/#!tRMDHDAZ!Cv09ijHB5WJrp5zNL4gzUyz3cv_1qy1X06Lx_e_t65k
Google Drive Links:
V1.0 Stable: https://drive.google.com/file/d/0BzLuAF-eWwH9VnIzNkxEbldsTjQ/view?usp=drivesdk
GitHub Repo: https://github.com/Giovix92/onex-modder.git
Tested OS:
*Windows 98 (Yeah, on VM )
*Windows XP (All SPs)
*Windows Vista (All SPs)
*Windows 7 (All SPs)
*Windows 8
*Windows 10
Download it and test if all works! If there is any bug, tell me! If anyone goes wrong, i'm happy to help you!
Please don't modify the batch code, or you can harm your device/pc.
Changelog:
V1.0 Stable: Added 5 more function. Check the new features pressing 11 on the menù!
V1.0b3: Added 7 more functions. Now there is 11 items + 2 hide on the menú. Check the new features pressing 11 on the menú!
V1.0b2: Added 2 new functions: Fastboot & Adb status connection verifer and Fastboot phone recharger
V1.0b1: Initial Release
Enjoy! )
How to use:
You don't need to setup anything.
You don't need .NET Framework. Simply install WinRAR 5.30 or up, download my rar package, decompress it and open the batch file. Make sure you have this tree:
|OneX_Modder (Folder)
|---OneX_Modder.bat
|---Resources
At first screen there is the disclaimer. After the disclaimer, there are some options:
If you want to unlock your bootloader, press 1. It will guides on how to. It includes an Unlock_code.bin auto flasher. )
If you want to flash a custom recovery, press 2. It will flash a custom recovery in the menú. Simply select a recovery, type Y (yes) and wait for the flashing. It's very easy. No more annoying manual-flashing
If you want to root your device, press 3. There is an explained how to.
If you want to flash a custom rom, press 4. There is an boot.img extractor and flasher and a guide provided by @teemo (thanks).
If you want to verify if the pc recognize the device, press 5, and the tool will show you the adb&fastboot status.
If you are desperatly in need to flash a rom but you haven't enough power, no more worries!! Reboot your phone in fastboot mode, connect to the pc, press 7 and your phone will be recharged!
If you want to read the about, press 9.
If you want to flash a new RUU, but you have the Bootloader unlocked and you need to flash a new RUU, press 8 and your bl will be relocked!
If you want to see the lasts changes, press 11.
If you want to flash a custom rom, but your hboot is older, press 0 and you will be guided. You need only to follow the first steps. The final process is automated!
FAQ:
Q: I have a problem with this tool! How can i do?
A: Don't worry! I will help you in any situation!
Q: Why some numbers aren't show?
A: They aren't shown because i'm working on their sections. I will add in new betas
Q: Really i need WinRAR? Why?
A: Yes, because the .rar archive is a RAR5 archive. Only WinRAR can open them.
Q: I really love it! How can i support you?
A: Simply press thanks button!
Q: How can i contact you if i have a problem with this tool?
A: Only this thread, because if a user has the same problem than you, he will find easily the solution without making a new post.
Added beta2! It has new functions: please check changelog (op post)
Thank you. Please place instructions of use/setup in op
nchc said:
Thank you. Please place instructions of use/setup in op
Click to expand...
Click to collapse
Yes, sure! There's no setup. I will add in 2nd post. Thanks for the tip.
Added an How to and FAQ. Enjoy! The beta3 is already ready for uploading! I will upload it the next week.
Guys, tell me your favourite colours for this little batch script and i will create 3 modded version with different colours! The beta3 will be published the next week due to much much work on it. It will has: HBOOT Upgrader, an how to and more more functions! The size is decreased of 30%. Sorry for this little problem
Some trouble.
Hello and thank you for your effort! I tried to flash twrp2853-endeavoru-NewLayout over the old one but while in recovery, the phone stays stuck at twrp hox welcome screen. Any idea of how can I pass this and access the twrp menu?
b12rtc said:
Hello and thank you for your effort! I tried to flash twrp2853-endeavoru-NewLayout over the old one but while in recovery, the phone stays stuck at twrp hox welcome screen. Any idea of how can I pass this and access the twrp menu?
Click to expand...
Click to collapse
Hmmm. Isn't passing at all TWRP welcome screen? The phone can boot up in fastboot? If yes, Try this: go on Resources-ADB_TOOLS. Right click on ADB_TOOLS and select command prompt. Then reboot your phone in bootloader mode and type: fastboot erase cache , press enter, type fastboot reboot bootloader or fastboot reboot-bootloader and try to access in recovery.
P.s. tomorrow i will publish beta3 with HBOOT Upgrader and much much more!
Giovix92 said:
Hmmm. Isn't passing at all TWRP welcome screen? The phone can boot up in fastboot? If yes, Try this: go on Resources-ADB_TOOLS. Right click on ADB_TOOLS and select command prompt. Then reboot your phone in bootloader mode and type: fastboot erase cache , press enter, type fastboot reboot bootloader or fastboot reboot-bootloader and try to access in recovery.
P.s. tomorrow i will publish beta3 with HBOOT Upgrader and much much more!
Click to expand...
Click to collapse
Thanks for reply! I've just tried what you suggested but in recovery I still can't pass the twrp ''hox teamwin big'' screen. If I put the old layout back everything is fine again but can't flash any newer rom.
I must tell you though, that I've tried to install it before using different ways but I had the same result There's no way to pass the twrp new layout's start scxreen. So I guess there's something wrong on my side... (I had cwmr before, it may be that?). If you have any other suggestion i'll be happy to try, If not I'll try to dig more.
Once again, thank you for your work and support.
b12rtc said:
Thanks for reply! I've just tried what you suggested but in recovery I still can't pass the twrp ''hox teamwin big'' screen. If I put the old layout back everything is fine again but can't flash any newer rom.
I must tell you though, that I've tried to install it before using different ways but I had the same result There's no way to pass the twrp new layout's start scxreen. So I guess there's something wrong on my side... (I had cwmr before, it may be that?). If you have any other suggestion i'll be happy to try, If not I'll try to dig more.
Once again, thank you for your work and support.
Click to expand...
Click to collapse
Hmmm... Probably the zip is damaged. The TWRP is flashed successfully or there are errors? No, the cwm doesn't make any problem. I will try to view if there is a problem on the code. Thanks for your test
Giovix92 said:
Hmmm... Probably the zip is damaged. The TWRP is flashed successfully or there are errors? No, the cwm doesn't make any problem. I will try to view if there is a problem on the code. Thanks for your test
Click to expand...
Click to collapse
I don't know for sure, but I rather think your zip file is ok. The flashing was ok, no errors. It's probably my phone. Of course, a double check on the code doesn't hurt, it just might be loosing time for nothing. Of course, if you will come back with something new tomorrow I will try my luck again
b12rtc said:
I don't know for sure, but I rather think your zip file is ok. The flashing was ok, no errors. It's probably my phone. Of course, a double check on the code doesn't hurt, it just might be loosing time for nothing. Of course, if you will come back with something new tomorrow I will try my luck again
Click to expand...
Click to collapse
I will check the code asap. In 10 minutes i will update you... No, if it's your phone other recoveries doesn't boot at all. Anyway, i will check. Retry and update me. Good luck!
Edit: I've checked all the code, of all recoveries.Now i will add stock HTC Recovery (if anyone wants the stock recovery). Anyway... I will add another TWRP with New Layout Support.
Edit2: Check the beta3!
Beta3 is out! Check the new version! It has 7 more functions. You can find them in OP post at Downloads section!
b12rtc said:
I don't know for sure, but I rather think your zip file is ok. The flashing was ok, no errors. It's probably my phone. Of course, a double check on the code doesn't hurt, it just might be loosing time for nothing. Of course, if you will come back with something new tomorrow I will try my luck again
Click to expand...
Click to collapse
Man, type fastboot getvar all into your cmd, and post here the result.
Guys, tell me any idea for the first stable. If you want any function on this script, tell me and i add them! (S-OFF is possible only on HTC One X+ and AT&T HTC One X)
Giovix92 said:
Guys, tell me any idea for the first stable. If you want any function on this script, tell me and i add them! (S-OFF is possible only on HTC One X+ and AT&T HTC One X)
Click to expand...
Click to collapse
Any chance of incorporating the ability to get Kali Nethunter on our One X(https://cyberkryption.wordpress.com/2014/10/13/the-quest-for-kali-nethunter-part1/)
pleomaxell said:
Any chance of incorporating the ability to get Kali Nethunter on our One X(https://cyberkryption.wordpress.com/2014/10/13/the-quest-for-kali-nethunter-part1/)
Click to expand...
Click to collapse
Hmmm... I've read all the steps... But i don't know kali nethunter. I know only Kali for pc. If you explain me because you want it i will add them in a separate batch that will be called by the main program. The main step is to build the cm... the 2nd is more difficult... The 3rd too... Please explain me. Thanks in advance.
Giovix92 said:
Hmmm... I've read all the steps... But i don't know kali nethunter. I know only Kali for pc. If you explain me because you want it i will add them in a separate batch that will be called by the main program. The main step is to build the cm... the 2nd is more difficult... The 3rd too... Please explain me. Thanks in advance.
Click to expand...
Click to collapse
I don't know how to explain it to you because I am not a programmer. I tried to follow that guide but got scared because it looked a bit complex.
pleomaxell said:
I don't know how to explain it to you because I am not a programmer. I tried to follow that guide but got scared because it looked a bit complex.
Click to expand...
Click to collapse
Okay, so... The process for me is a bit complicated because now i'm a win user, and not a linux user due to my bad pc (only 1gig of ram, single core 1.66GHz), but i can create an .sh script that can do this process automatically. Maybe if this work i will create some .sh script to build some custom rom . I need only to write the code that is in the guide (maybe with 2-3 sec of delay too and some echo) and optimizing them with some request. Anyway, stay tuned!
This is NOT my work (Ianmacd) and guide is written by Mr Pickles all credits to him for his install method.
Also this is just a copy and paste but the guide is well written and TWRP should cause less issues.
I'm sure Gieti94 is just perhaps busy with other commitments, credit also to him for his fantastic efforts.
Just a new space for the currently working TWRP so all don't get in a pickle.
----------------------------
Download Maintained By Pickles (best all in one convenient place) will have everything necessary for twrp functionality. Credit to pickles.....:good:
http://bit.ly/2VlcqYd
Excellent installation Guide below
Install Guide
---------------------------
- NOT A SINGLE STEP IS UNNESSECARY
- DO THEM _ALL_ EXACTLY!
- ALL YOUR DATA WILL BE GONE - BACKUP!
---------------------------------------
DO NOT INSTALL MODPACK FROM SOLDIER - IT BREAKS TWRP!
---------------------------------------
If you have any problems - contact @PiCkLeS or on Telegram by PiCkLeS or @rp4k
---------------------------------------
All development is by @ianmacd (Ian Macdonald).
---------------------------------------
0 - No matter what you have today, no root or Magisk-only solution or TWRP with Magisk-solution, do ALL the steps..
1 - Make sure you copy the "Magisk_Manager_Ian_install.apk" file and "Multidisabler-g97x_by_Ian.zip" file to your sd-card before you start!
2 - Download latest firmware via Samfirm or Frija or in any way you can, and unpack.
3 - Boot your phone to Download mode (Power+Bixby+VolDown) and remember to have the USB connected to your computer, it won't boot to DL-mode otherwise
4 - Keep autoboot etc in Odin settings, put each file in its place (AP, BL, CSC etc) and _dont_ use HOME_CSC, use CSC-only-file.
5 - After Odin is done, your phone will reboot automatically - let it! It can feel like forever, but let it do its restarts and stuff until you are in system-setup
6 - Do the setup as per usual, CONNECT TO WIFI but you can safely just say Skip on sign in and other stuff
7 - When setup says its all finished and you get to the standard launcher - go into Settings and enable Developer settings
8 - This step IS necessary.. If you don't do this step, you might get in pre-normal rrm state and you will have wait 7 days to try again: Enter Developer settings and look for the "OEM Unlock" switch - if you are rooting for the first time, Enable it. If you already have root since before or unlocked your bootloiader before, just confirm that its Enabled and graded out.
9 - If you already have an unlocked bootloader, skip to step 12. If not, continue with step 10.
10 - IF you never have unlocked your bootloader before, Power off the phone and boot into download mode again. You will see the long press volUp option for unlock bl, do that.
11 - IF you never have unlocked OEM before, boot the phone again, do the setup without signing in etc but connect to wifi, enable dev settings, go into dev settings and check that OEM now is enabled and grayed out.
12 - Reboot the phone in recovery mode (Power+Bixby+VolUp and keep holding until you are in stock recovery. Choose and do a factory reset.
13 - Reboot to bootloader with option in Recovery.
14 - Flash the tar you got (S10x-TWRP+Magisk_fixed_by_Ian.tar I Odin in the AP-slot. DISABLE auto reboot in Odin first!
15 - When the tar has flashed - Do as instructed on the phone, hold Power+VolDown for a few seconds and AS SOON AS THE SCREEN GOES BLACK -> quickly press power+bixby+volUp for a _long_ time, and I mean it can feel as if its a full minute! After a while you will see TWRP starting with its start screen, you can now let go and enter TWRP.
16 - FORMAT data, then WIPE data AND Cache. DO NOT LET IT REBOOT
17 - Flash "Multidisabler-g97x_by_Ian.zip" from SD card
18 - Go back to start screen of TWRP, Choose Reboot, Choose Recovery - YOU MUST ALWAYS CHOOSE REBOOT TO RECOVERY and _NOT_ system!
19 - Let the phone reboot into system, it will do some reboots it self, and again it will feel like it takes FOREVER - Just let it do its thing and DO NOT PRESS ANY KEYS!
20 - When your phone is finally done booting, just do the normal setup/signing for real this time.
21 - When you are done and in system/launcher, install "Magisk_Manager_Ian_install.apk" from SD card and verify that you now have Magisk Manager installed.
22 - Start Magisk Manager and say YES to what it says, it will do some stuff and then say "Rebooting in 5 seconds" - LET IT BOOT AND DO NOT TOUCH ANY KEYS this time either..
23 - Now when booted to system, start Magisk Manager and see that you have all green and its installed.
24 - Now you have root.
** Every time you reboot manually, be prepared to hold Power+Bixby+VolUP until you see the Samsung S10x-logo, then release and let it reboot, you will have root.
** Every time you power off the phone, when you power ON again, hold Power+Bixby+VolUP until you see the Samsung S10x-logo, then release and it will boot with root.
** Every time you want to enter TWRP-recovery, do as above but KEEP HOLDING THE KEYS UNTIL TWRP-start screen shows then release. Remember to choose reboot to recovery afterwards and you will boot with root.
** IF you screw up and forget or miss the key combo, just let it boot to system, immediately when system is up - reboot again and do the key combo and all is fine again.
This is me just trying to get an emergency first aid space, nothing more, I'm NOT trying to take any credits or dismiss Gieti94.
Thanks All
Duncan1982 said:
This is NOT my work (Ianmacd) and guide is written by rp4k all credits to him for his install method.
Click to expand...
Click to collapse
This is my tutorial and not r4pk. And I'd prefer that you use the download I provide here and no where else to make sure the right files gets downloaded when updated.
http://bit.ly/2VlcqYd
/P
Yea I can keep the OP updated, this is just an emergency first aid thread, thanks to Pickles for his well written guide.
I'm really not wanting to offend anyone, just for all to make life a bit easier....
very nice to have a reliable twrp solution, pitty that we don't have too many things to flash in recovery
Please remove the alternate download link, I have updated the multidisabler zip with a important update, v1.1 and the one download link for all is just for things like that, the other download link still have the old zip.
Very important that everyone uses Ian Macdonald's new v1.1 multidisabler script.
/P
I can update the mega link with the new disabler I reposted it to mega because I can't access Google @PiCkLeS
And yes I never said I wrote the guide I just added myself for helping people
rp4k said:
I can update the mega link with the new disabler I reposted it to mega because I can't access Google @PiCkLeS
Click to expand...
Click to collapse
I understand. But that doesn't seem to be a big problem for any one else and the bigger problem is that you risk having a link that is being used by the people only see it here and don't read anywhere else, or this message, and end up with old information or even worse, outdated files.
I can help you get the files on PM but please remove these links outside of my drive, which I maintain every day and keep up to date. It's not for vanity, it's for safety.
For now please edit your text and remove the link. All must use v1.1 of the multidisabler zip by Ian.
/P
Maybe this thread was a bad idea, as stated I am around and willing to keep things up to date
I know the importance, and how things are at present.
Duncan1982 said:
Maybe this thread was a bad idea, as stated I am around and willing to keep things up to date
I know the importance, and how things are at present.
Click to expand...
Click to collapse
Listen, just to be clear. I and I dont think Ian have a problem with you having this thread.
All I am worried about is the download link. Things can and are happening fast. If there are multiple sources for downloading files in this case, and today one was updated with important improvements, and there are many places to download from people can miss that and download old files that can cause big problems.
Keep the downloading to one good source and everything will be fine. The thread in it self can do much good by showing that there is an alternative, it works and right now almost 100 people in 24 hours have used it. Fantastic!
So I dont think it was a bad idea, I just dont want PM:s from people in a week or two asking why their device suddenly lost data, only to find out that they downloaded from a source that didnt have the latest files.
Thats all.
//P
PiCkLeS said:
Listen, just to be clear. I and I dont think Ian have a problem with you having this thread.
All I am worried about is the download link. Things can and are happening fast. If there are multiple sources for downloading files in this case, and today one was updated with important improvements, and there are many places to download from people can miss that and download old files that can cause big problems.
Keep the downloading to one good source and everything will be fine. The thread in it self can do much good by showing that there is an alternative, it works and right now almost 100 people in 24 hours have used it. Fantastic!
So I dont think it was a bad idea, I just dont want PM:s from people in a week or two asking why their device suddenly lost data, only to find out that they downloaded from a source that didnt have the latest files.
Thats all.
//P
Click to expand...
Click to collapse
I fully appreciate and understand that, the reason I created as I have plenty of time to maintain, and will keep it up to date I have been around for quite some time, if you look at my posts (search) I have had almost every device you can think of, currently have the Vivo IQOO also, I have enough experience to understand the important and implications.
I don't want your PM's to be going crazy so I'll fully respect your decisions and will keep everything updated also. But it is better if everything is tody and not one thing here and there, OP has been updated with your direct link, is this cool?
Just thought by creating this thread that it might help, my sincere and good intentions are hopefully evident
PiCkLeS said:
Please remove the alternate download link, I have updated the multidisabler zip with a important update, v1.1 and the one download link for all is just for things like that, the other download link still have the old zip.
Very important that everyone uses Ian Macdonald's new v1.1 multidisabler script.
/P
Click to expand...
Click to collapse
Can I install multi Disabler 1.1 withouth lost data?
zubi182 said:
Can I install multi Disabler 1.1 withouth lost data?
Click to expand...
Click to collapse
Yes just flash it in twrp, nothing will be lost.
/P
I assume this is only for the Exynos version? Or does it work for Snapdragon as well?
mistermidas said:
I assume this is only for the Exynos version? Or does it work for Snapdragon as well?
Click to expand...
Click to collapse
You have a working snapdragon root? How did you get past step #9 of launching stock recovery after you flashed magisk
rp4k said:
You have a working snapdragon root? How did you get past step #9 of launching stock recovery after you flashed magisk
Click to expand...
Click to collapse
Man... did you even read my comment???
I was asking if this would work for Snapdragon, not saying I got it to work. It doesn't mention if it's a method for both versions in the OP or not.
mistermidas said:
Man... did you even read my comment???
I was asking if this would work for Snapdragon, not saying I got it to work. It doesn't mention if it's a method for both versions in the OP or not.
Click to expand...
Click to collapse
Sorry I responded when I was half asleep. My fault.
I will try this out and post and update, i had no luck with previous twrp, always boot loops regardless of what i do.
My bootloader is unlocked but not grayed out. Can i still do it?
mercifool said:
I will try this out and post and update, i had no luck with previous twrp, always boot loops regardless of what i do.
My bootloader is unlocked but not grayed out. Can i still do it?
Click to expand...
Click to collapse
Yes, just do exactly all the steps and use the new files in the link and you will be fine.
//P
deleted
Carotix said:
hi ,
do you have the OEM switched to on?
if not , you need it ..... if you can't get it because you are waiting the 7 days , you can make this trick
open settings and set the date 8 days before ... then reboot
so you can enable OEM in developer settings
Click to expand...
Click to collapse
Hi there, are these instructions for Exynos only or can I apply it to Snapdragon as well, please advise. Thank!
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CLICK HERE TO READ THE MEGATHREAD BEFORE DOING ANYTHING TO YOUR DEVICE
Here we are guys... After searching here and there i found some working ways to Root this device without getting bricked. So let's discuss about these :
1. UNLOCKING BOOTLOADER :
- Download the Mi Unlock app to PC, and sign in with your Mi Account;
- Enable Developer Option in your phone by tapping the "Build Number" 7 times
- Go to Developer Options "Settings > Additional Settings > Developer Options
- Enable USB Debugging and OEM Unlocking
- Aslo add account in Mi Unlock Status (Can be found in Developer Options
- Install all the required drivers (adb drivers, vcom drivers etc.) In your PC [I'll link these below]
- Shut down your phone manually, and hold Volume down key and Power button to enter Fastboot mode
- Connect your phone to PC using USB cable and click "Unlock". In Mi Unlock Tool
- You will be given a specific time (168 hours mostly)
- Wait until that and redo Unlock process
- Woah you have Unlocked your device
2. FLASHING TWRP :
- Install Minimal ADB and fastboot on your PC [Link will be provided below]
- Download LR Team TWRP [This work for now, I'll provide link below and will update it after we have another proper TWRP]
- Put that TWRP in the file location of ADB and Fastboot (Right click on Minimal ADB and Fastboot icon on desktop and click on Open file location)
- rename that recovery to "twrp" for convenience (optional)
- Now Connect your phone to PC With USB Debugging on (keep phone on).
- Type
Code:
adb devices
and accept the pop up on phone's screen.
- Now reboot your phone to Fastboot mode
- Type
Code:
fastboot devices
- Your device ID will be visible on Screen.
- Then type
Code:
fastboot flash recovery twrp.img
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
- Done U did it
3. ROOTING :
- In TWRP mount System
- Go to Advanced > file manager
- then go to system_root > system and delete "recovery-from-boot.p"
- Go home and again go to advanced and Select "Close AVB2.0" swipe to confirm.
- Go back and select "Install Root"
- Here you go magisk 19.4 will be installed (U can chose any other versions afterwards.)
- Reboot the device to system.
- Ah Yes you did it
In case anything goes wrong ask me here or in official telegram group
LINKS
1. Mi Unlock tool
2. Minimal ADB and Fastboot
3. ADB Drivers for MTK
4. MTK USB Drivers
5. LR Team TWRP
If this helped you then hit the Thanks Button. Good Luck
Does it work for the china edition of the phone?
These are the the same instructions as found here https://forum.xda-developers.com/showpost.php?p=80604223&postcount=2
Why create a new thread without giving any credits. It's cluttering the forum.
In case anything goes wrong ask me here or in official telegram group
Click to expand...
Click to collapse
Reported, read the FAQ about telegram.
donkyshot said:
These are the the same instructions as found here https://forum.xda-developers.com/showpost.php?p=80604223&postcount=2
Why create a new thread without giving any credits. It's cluttering the forum.
Reported, read the FAQ about telegram.
Click to expand...
Click to collapse
Ah ok...i didn't check that thread... I just searched here and there and created a simple guide...
Robstir said:
Yes it does, I just rooted mine, Chinese 8gb RAM with Chinese ROM (no Google) only problem I just found was - can't make a TWRP back up on either storage, says can't make the folder, key unavailable.
I tried a couple of other methods which didn't work, so great stuff for posting here, I don't use Telegram, so it's really helped me, even if it is a duplicate, wind your neck in with the reporting Donkeywhatever!
Thanks OP
Click to expand...
Click to collapse
I'm glad to hear that it helped you...
Robstir said:
Thanks, it did brilliantly, any advice on the TWRP can't make the backup folder?
I'm keen to start pruning the system of the useless Xiaomi bloatware but not without a backup, flashed Magisk 20.1 also, working perfectly.
Click to expand...
Click to collapse
Wait for a proper TWRP. Cuz devs are already working on it
anybody tried that with chinese phone swapped to global rom?
Robstir said:
Yes it does, I just rooted mine, Chinese 8gb RAM with Chinese ROM (no Google) only problem I just found was - can't make a TWRP back up on either storage, says can't make the folder, key unavailable.
I tried a couple of other methods which didn't work, so great stuff for posting here, I don't use Telegram, so it's really helped me, even if it is a duplicate, wind your neck in with the reporting Donkeywhatever!
Thanks OP
Click to expand...
Click to collapse
Erm the issue i have with ChinaRom is that I cant use my own homescreen launcher... even with root I cant bypass it... so I have to be on Global ROM... but china variant with global rom causes boot loop.... and seeing that you are using the only TWRP available i think the results are the same...
---------- Post added at 05:42 AM ---------- Previous post was at 05:42 AM ----------
pritish1998 said:
Wait for a proper TWRP. Cuz devs are already working on it
Click to expand...
Click to collapse
Oo really? Gee can't wait....
so always bootloop issue with china/global device?
Bricked my China Rom Phone
I just bricked my phone - story here:
https://forum.xda-developers.com/redmi-note-8-pro/help/help-to-unbrick-china-redmi-note-8-pro-t4004681
So does anyone have any idea how I can unbrick? Should I REM out the antirollback check lines in flash_all.bat?
Any help is much appreciated! Thank you!
My phone came with the Global EU (EEA) version ROM, i have flashed Global (MI) version. Will this method still work or will it cause bootloop? I don't want to brick my device so asking in advance. I was lucky to just get stuck in bootloop with my previous try using a different recovery.
P.S. I used MiFlash Tool and flashed the ROM through Fastboot.
Hey Pritish1998,
I must admit, I was a little leery, after reading all the other threads about installing twrp and rooting and the horror stories they contained. Well, your instructions seemed fairly simple. I followed them EXACTLY... and I lost my ass, everything got wiped, my imei, everything!!!
Totally kidding, everything worked perfectly, I followed your steps exactly as stated. I did not loose any data, nothing, every app, all my downloads, everything is still on my phone. THANK YOU SO MUCH!
Also, TWRP, is still installed, didn't get wiped out by the stock recovery. I have root, and oh, I am on MIUI Global, on the United States phone I ordered off of Amazon. More Specifically, MIUI Global 11.0.1.0(PGGMIXM) Android Version 9 PPR1.180610.011. I received the MIUI 11 update about 3 days ago, and was still waiting the 160 some hours out for the bootloader unlock. I just got the bootloader unlocked about 3 hours ago. Went through numerous instructions and posts and this one seemed to make the most sense. I wasn't sure about MIUI 11 working, but fudge it, I thought I would just return the phone if I had a problem, but nope, you're instructions were clear and precise and I followed them to a tee and its working great and I have Magisk and did the safetynet update, and I'm all good.
I haven't updated Magisk to 20.1 though. Didn't want to press my luck.
Thanks so much bro, really, thank you.
this procedure worked as well on an indonesian 11.0.1. rom!!!
thx!
Hello good day! I have a question about TRWP:
1) Is it safe to install this TRWP f I am on 11.0.1.0 PGGEUXM?
Has anyone else done it since rom EEA instead of Gobal (MI)?
Thank you
Thank you very much, magisk works perfectly
donkyshot said:
These are the the same instructions as found here https://forum.xda-developers.com/showpost.php?p=80604223&postcount=2
Why create a new thread without giving any credits. It's cluttering the forum.
Reported, read the FAQ about telegram.
Click to expand...
Click to collapse
NOTHING WRONG WITH THE ABOVE POST BUT MORE INFORMATIVE. The link you claimed to be original is for the Chinese device only not for the Global. TWRP is also different. Check the files.
neoxcool said:
NOTHING WRONG WITH THE ABOVE POST BUT MORE INFORMATIVE. The link you claimed to be original is for the Chinese device only not for the Global. TWRP is also different. Check the files.
Click to expand...
Click to collapse
No need for caps lock. We can read.
It was initially a double post he just edited it later and changed it to a guide, which is fine.
It's the same procedure like initial Chinese twrp which was and is already posted here.
I'm on xiaomi.eu beta Android 10 but now i can't boot the recovery, any ideas?
.
Martin213 said:
You can't boot to stock recovery?
Be careful now i think you're one step ahead brick...
Click to expand...
Click to collapse
Phone is working normally but i want to change to stable, but the recovery is not booting.
Was checking system updates and found an update.
HermesHidayat said:
Was checking system updates and found an update.
Click to expand...
Click to collapse
Yup, was posted today on telegram group...
(WW)
FOTA (incremental update from 2004.60) ;
Rename to UL-ASUS_I001_1-ASUS-17.0240.2004.9-1.1.185-user.zip
https://fota2.asus.com/delta_packag...2004.60-17.0240.2004.9-06061254-fota-user.zip
Full rom zip ;
https://dlcdnets.asus.com/pub/ASUS/...S_I001_1-ASUS-17.0240.2004.9-1.1.185-user.zip
Raw rom ;
https://drive.google.com/file/d/1T0P8CDJLjPypRAS2HDpdUn8Z-M5tfzKc/view?usp=drivesdk
Stock boot img ;
stock2004.9
Root boot img ;
root2004.9
Place rom in root of storage and reboot. Once detected click to update. Reboot again to finish.
For those with root already and wishing to keep root, simply put the rom in root of storage, reboot and click to update when prompted. BUT, DON'T reboot yet when it finishes updating. Click 'later', go to magisk manager and choose 'install magisk'. When given the options for installing, select 'after OTA' (or words like that). Once magisk is installed again, select reboot. Root will be maintained. Saving the hassle of flashing the root img via fastboot.
-----------------------------------------
For those of you who are not yet rooted but would like to be using the boot img above, see below for guidance. NOTE: if something goes wrong, I am not responsible in any way!! Also, by unlocking bootloader (which is required for root), you will void your warranty.
Also note: you must update to latest 2004.9 rom from above links before starting this process. Should you wish to do this process another time with another update, you MUST ALWAYS match the root boot img for the same rom version you are using.
1. First you need to unlock the bootloader. Download and install the apk from link, then follow instructions. NOTE: doing this wipe the device. Do not power off the device or stop the process once started. I think the device will reboot a couple of times during the process, but ican't remember sorry... Just leave it to do its thing and once finished, proceed to step 2.
Get the bootloader unlock tool, which says in the description that it's compatible with android 10, from here. You'll find it under tools/utilities.
2. Download and install Minimal ADB and Fastboot app (windows). Install it on your PC/laptop to C drive
3. Download the root2004.9 boot img from above and move/save it to (C:\Program Files (x86)\Minimal ADB and Fastboot folder)
4. Switch the phone into fastboot mode (from device being in off/powered down, hold volume up then press and hold power button). Fastboot is the first screen you see with a scrollable menu giving some other options, don't select any options... just stay in that mode. Connect the phone to pc/laptop using the SIDE port of the phone. Navigate to C:\Program Files (x86)\Minimal ADB and Fastboot folder and double click the cmd-here.exe, this will open a cmd window.
5. (optional, but recommended) Once your phone is connected in fastboot mode and you have your cmd window open, type 'fastboot devices' in the cmd window. If your device is recognised then a key/serial will be displayed. Providing this is shown, proceed to step 6.
6. Next you are going to flash the root boot img (which, if you followed the instructions, should be in the Minimal ADB folder). In the cmd window type 'fastboot flash boot magisk_patched2004.9.img'. Once completed without errors, your device will now have a rooted boot img flashed. Yey!!
7. Now you can go ahead and unplug your device and boot it up. I did this months ago when I first got the phone, so you'll have to forgive me.... I can't remember if magisk manager is installed during the above process or if you have to install it manually after. If, when you have booted to system, there is no 'magisk manager' in your app drawer, you'll need to install yourself from here scroll about half way down the page and you'll see the downloads section. Go for the latest stable (currently 7.5.1).
8. Download a root checker app from playstore to verify you have root and you're done. If you need to resort back to original boot img, download it from above and follow the same process, but instead type 'fastboot flash boot boot2004.9.img'.
reg66 said:
Yup, was posted today on telegram group...
(WW)
FOTA (incremental update from 2004.60) ;
Rename to UL-ASUS_I001_1-ASUS-17.0240.2004.9-1.1.185-user.zip
https://fota2.asus.com/delta_packag...2004.60-17.0240.2004.9-06061254-fota-user.zip
Full rom zip ;
https://dlcdnets.asus.com/pub/ASUS/...S_I001_1-ASUS-17.0240.2004.9-1.1.185-user.zip
Stock boot img ;
stock2004.9
Root boot img ;
root2004.9
Place rom in root of storage and reboot. Once detected click to update. Reboot again to finish.
For those with root already and wishing to keep root, simply put the rom in root of storage, reboot and click to update when prompted. BUT, DON'T reboot yet when it finishes updating. Click 'later', go to magisk manager and choose 'install magisk'. When given the options for installing, select 'after OTA' (or words like that). Once magisk is installed again, select reboot. Root will be maintained. Saving the hassle of flashing the root img via fastboot.
Click to expand...
Click to collapse
bro,im not saying youre disturbing or whatsoever,you should make a detailed thread.unlike me im kinda dumb,i dont understand this Root boot img and so on. and making your own thread will allow more people will see your thread as i doubt many people will come to this thread to read...
Can anyone check to confirm whether heating is still on an issue on the new version?
HermesHidayat said:
bro,im not saying youre disturbing or whatsoever,you should make a detailed thread.unlike me im kinda dumb,i dont understand this Root boot img and so on. and making your own thread will allow more people will see your thread as i doubt many people will come to this thread to read...
Click to expand...
Click to collapse
Nah, should be fine here. People will still see the update in your title and click to view content. And for those that want root who are not already rooted I'll add some instructions in a while or tomorrow about how to use the boot img's (on my phone right now, it's easier if I do it on pc). Links and details are only the second post on the page so people will still see the info they need. So yeah, if it's OK with you I'll just leave the content here rather than starting another thread with the same title
---------- Post added at 03:36 AM ---------- Previous post was at 03:35 AM ----------
TikiThePug said:
Can anyone check to confirm whether heating is still on an issue on the new version?
Click to expand...
Click to collapse
I'd like to shed some light on this for you but I'm not a heavy gamer (I assume that's when the device gets hot mainly) and have never had any heating issues with any of the builds
TikiThePug said:
Can anyone check to confirm whether heating is still on an issue on the new version?
Click to expand...
Click to collapse
i dont play games anymore on my phone but the only time it hit 74 degrees was when i left my phone in my car under the sun...
reg66 said:
Nah, should be fine here. People will still see the update in your title and click to view content. And for those that want root who are not already rooted I'll add some instructions in a while or tomorrow about how to use the boot img's (on my phone right now, it's easier if I do it on pc). Links and details are only the second post on the page so people will still see the info they need. So yeah, if it's OK with you I'll just leave the content here rather than starting another thread with the same title
Click to expand...
Click to collapse
of course its fine.i was worried people wouldnt be able to see it.
Issue with Android 10 update on tencent with WW fingerprint
@reg66 tried moving post 2 ROM into root of storage .bit the update is still failing . New update is detected and after reboot, while it initialising install it's failing at the very start
Hi I have a CN Rog2 on ww1910.64-0 and fingerprint on ww. Using Asus updater I am getting 2001.60 .but post reboot while installing it errors out in the very beginning. Any guidance would be much appreciated !
VeeJay1 said:
Hi I have a CN Rog2 on ww1910.64-0 and fingerprint on ww. Using Asus updater I am getting 2001.60 .but post reboot while installing it errors out in the very beginning. Any guidance would be much appreciated !
Click to expand...
Click to collapse
Hmm, you should be able to update from latest A9 (1910.64) to A10. I'm guessing that the updater app only downloads the small incremental updates. These will fail unless you update 1 by 1, going up one version each time.
If you wanna jump straight to latest update (currently this one) download the FULL rom zip from post 2 of this thread. Put that in root of storage and reboot. Should hopefully not fail now and you'll be on latest.
Issue with Android 10 update on tencent with WW fingerprint
@reg66 tried moving post 2 ROM into root of storage, but the update is still failing . New update is detected and after reboot, while it's initialising install it's failing at the very start
Hi I have a CN Rog2 on ww1910.64-0 and fingerprint on ww. Using Asus updater I am getting 2001.60 .but post reboot while installing it errors out in the very beginning. Any guidance would be much appreciated !
Yes, moved to 2004.9
Did the incremental update and now my tencent rog2 on ww2004.9. thanks for the pointers.They really helped.
reg66 said:
I'd like to shed some light on this for you but I'm not a heavy gamer (I assume that's when the device gets hot mainly) and have never had any heating issues with any of the builds
Click to expand...
Click to collapse
Thanks man. Basically I had issues on A10 heating up even while just browsing the web. I would open up Armory Crate > Console and the CPU temp would be around 40+ Celsius. So now I'm back on A9, which shows temps of 30 Celsius with normal use.
well, video recording while connected to usb mic still doesn't work with the asus camera app
VeeJay1 said:
Did the incremental update and now my tencent rog2 on ww2004.9. thanks for the pointers.They really helped.
Click to expand...
Click to collapse
So the incremental worked direct from 1910.64 to latest? Or you had to go through each incremental?
---------- Post added at 07:12 PM ---------- Previous post was at 07:10 PM ----------
TikiThePug said:
Thanks man. Basically I had issues on A10 heating up even while just browsing the web. I would open up Armory Crate > Console and the CPU temp would be around 40+ Celsius. So now I'm back on A9, which shows temps of 30 Celsius with normal use.
Click to expand...
Click to collapse
Man that sucks. I've had zero heating issues even with leaving X mode on permanently @120Hz
Had to do this with each incremental update!
reg66 said:
So the incremental worked direct from 1910.64 to latest? Or you had to go through each incremental?
---------- Post added at 07:12 PM ---------- Previous post was at 07:10 PM ----------
Man that sucks. I've had zero heating issues even with leaving X mode on permanently @120Hz
Click to expand...
Click to collapse
TikiThePug said:
Thanks man. Basically I had issues on A10 heating up even while just browsing the web. I would open up Armory Crate > Console and the CPU temp would be around 40+ Celsius. So now I'm back on A9, which shows temps of 30 Celsius with normal use.
Click to expand...
Click to collapse
I've also suffered from battery and performance issues in A10. A9 was just fabulous, A10 was a step back.
I'm also a heavy gamer and just updated so I'll be sure to let you know what's going on.
P.S I did manage to improve performance and some battery life by installing the only real custom kernel we have, but which is a great one - kirisakura + Naptime with doze on Google play services.
VeeJay1 said:
Had to do this with each incremental update!
Click to expand...
Click to collapse
Ahh ok, bummer!! At least it's sorted now
Hi all, I have problem with the last update, always that's stop at 9% with message error update
dracoolia said:
Hi all, I have problem with the last update, always that's stop at 9% with message error update
Click to expand...
Click to collapse
I had the same problem with the incremental update. Just use the full ROM linked in the op.
Thanks for the Rooted Image.
Hi just chasing the raw rom if anyone has it please!
Hi there,
I've combined some custom-kernel-like tweaks into a single flashable .tar file and I wanted to share it with you.
This .tar file contains:
-patched vbmeta image
-working magisk root with full Android 11 support
-magisk manager helper preinstalled
-a cleaned up boot screen + no bullsh*t on boot screen
-a cleaned up unlocked bootloader screen + no bullsh*t on unlocked bootloader screen
Prerequisites
-an unlocked bootloader
-firmware version CTL1 (A11)/BTJ3 (A10) or newer
-Odin 3.XX.X
-all data backed up
-fully functional brain
-stock recovery and firmware (this will not work if you have a custom recovery or run a custom rom)
STOCK BASED ROMS LIKE BEYONDROM WILL ALSO NOT WORK!
PLEASE NOTE:
-I am not responsible for a bricked device, please make backups and make sure to
always have the official firmware if something goes wrong
-flashing this requires you to factory reset your phone or else the phone won't boot
Instructions:
-unlock your phone's bootloader
-boot into download mode
-in Odin uncheck auto-reboot
-put the .tar file into the AP slot (If it doesn't work try USERDATA)
-after flashing boot into recovery with the key combination
-select factory reset and confirm (This will wipe everything from your phone)
-after factory reset reboot into system
-setup the phone and restore your backup (if you made one)
-Install Magisk and you're good!
If you have any problems
Please don't just comment "Doesn't work" and instead tell me about
the errors you encountered, your software info and other information
you think would be helpful.
Happy flashing!
If you still have questions make sure to ask them below
DOWNLOAD CTL1+: https://1drv.ms/u/s!AtNTTTF5vqOe73aVGDPSRGr5aria?e=dICFlS
DOWNLOAD BTJ3+: https://drive.google.com/file/d/1KqOGRbAy4fY1ghro4HoP-eDDYh4G7b5Z/view?usp=sharing
Tried it on my friend's phone,works great.Thanks
Can i flash it as my firmware version starts with QP1A.??(build number)..
Thanks in advance and cheers..
@[email protected] said:
Can i flash it as my firmware version starts with QP1A.??(build number)..
Thanks in advance and cheers..
Click to expand...
Click to collapse
This doesn't say anything. Can you tell me what custom ROM you are running? If you are on rooted stock also tell me.
Hi,yes,phone is rootedAndroid 10,,one Ui,v 2.1,build number QP1A 190711.020.G988BXXU1ATCT..
@[email protected] said:
Hi,yes,phone is rootedAndroid 10,,one Ui,v 2.1,build number QP1A 190711.020.G988BXXU1ATCT..
Click to expand...
Click to collapse
Geeeeeez! Update your phone! You have to have OneUI 2.5 BTJ3 or OneUI 3.0 CTL1 at least. What are you doing on 2.1? If you don't update, this will break your phone.
Okay buddy,ty..will do that.
Hi again m8,can i update Android 11,,One GUi 3.0,RP1A200720.012 G988B...
And ,or which file i have to use??
@[email protected] said:
And ,or which file i have to use??
Click to expand...
Click to collapse
Depends on the version. I don't want to be rude but how did you even manage to root your phone with this lack of knowledge?
If you update to Android 11/One UI 3.0 you chose the One UI 3.0 one. If you only update to 2.5 you chose 2.5. Remember to check the end of your firmware number:
There are supported firmware endings:
One UI 2.5:
-BTJ3
-BTJ4
One UI 3.0:
-CTL1
-CTL6
-Any One UI 3.0 firmware above that.
Download SM-G988B / Galaxy S20 Ultra 5G SM-G988B in Samfw - Samsung firmware download
Pick your CSC there, chose the newest one preferably (A11), press "Download on website", unzip it and flash it with Odin while in download mode. You should know how to do that.
After it's finished, complete setup (do not restore any backups yet!) and go into download mode again. Flash the file as AP or USERDATA (whatever works) and perform another factory reset. Done.
So i just reflashed stock because Beyond rom is givving me issues, says you removed all the BS from the boot screens but i still have that unlocked bootloader msg. i flashed in AP with no issues, that msg mean it didnt work?
BCityModz said:
So i just reflashed stock because Beyond rom is givving me issues, says you removed all the BS from the boot screens but i still have that unlocked bootloader msg. i flashed in AP with no issues, that msg mean it didnt work?
Click to expand...
Click to collapse
The unlackiert bootlaoder Massage Stars Tiere just wichtig Themen Bulletin
Edit: German Autocorrection sorry wait haha
JanBoyGamer23 said:
The unlackiert bootlaoder Massage Stars Tiere just wichtig Themen Bulletin
Edit: German Autocorrection sorry wait haha
Click to expand...
Click to collapse
Ok disabled the autocorrection. What I was trying to say is: The unlocked bootloader message is still there just without the bull**** about your phone being vulnerable to hackers and this other ****. It now just says that it is unlocked.
JanBoyGamer23 said:
Ok disabled the autocorrection. What I was trying to say is: The unlocked bootloader message is still there just without the bull**** about your phone being vulnerable to hackers and this other ****. It now just says that it is unlocked.
Click to expand...
Click to collapse
Ok sweet, so Im no pro at any of this but i know the basics to flash. and wasnt able to unlock my last phone because the unlock option never popped up in settings. but now my camera isnt working, i open it up and its just black, no errors or anything.
BCityModz said:
Ok sweet, so Im no pro at any of this but i know the basics to flash. and wasnt able to unlock my last phone because the unlock option never popped up in settings. but now my camera isnt working, i open it up and its just black, no errors or anything.
Click to expand...
Click to collapse
That can't be an issue with the script as it doesn't modify anything related to the camera
JanBoyGamer23 said:
That can't be an issue with the script as it doesn't modify anything related to the camera
Click to expand...
Click to collapse
Ok I may have to make a copy of my girls phone and flash original back to the phone and go again.
JanBoyGamer23 said:
That can't be an issue with the script as it doesn't modify anything related to the camera
Click to expand...
Click to collapse
yea IDK, did it all over again, even booting up to make sure the cam was working. same thing black screen when i open the camera app.
ok, i tried searching to see if this trips knox...so i am gonna ask at the risk of appearing stupid...
Does it trip knox??
frostmore said:
ok, i tried searching to see if this trips knox...so i am gonna ask at the risk of appearing stupid...
Does it trip knox??
Click to expand...
Click to collapse
Short answer: Yes
Long answer: You are unlocking your bootloader and flashing a custom image so you lose your warranty and trip knox
frostmore said:
ok, i tried searching to see if this trips knox...so i am gonna ask at the risk of appearing stupid...
Does it trip knox??
Click to expand...
Click to collapse
If you want to use s health: Download build.prop editor, grant it root access and and change the value of 'ro.config.tima' from 1 to 0