Resurrection Remix Q
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Installation
Reboot to recovery
Disable Encryption
Format /system, /vendor,/data and /cache
Flash ResurrectionRemix ROM
Switch Alternative slot.
Reboot to recovery
Wipe /data & /cache
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
Reboot
First boot may take up to 5 minutes.
DownloadsRROS-Q-8.6.9-20210518-DRG_sprout-UnofficialGApps
SourceResurrectionRemixkernel Source
Thanks
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
BUGS
Battery Stats
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
XDA:DevDB Information
[ROM][10.0_r47][DRG_sprout]Resurrection Remix v8.6.4[Q][Android 10], ROM for the Nokia 6.1 Plus (Nokia X6)
Contributors
ArcherTanu, sid127, theimpulson, Sahil_Sonar,thanuj10
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Android 10
Based On: Lineage OS
Version Information
Status: Stable
Created 2020-11-26
Last Updated 2020-11-26
Screenshot
View attachment 5144425View attachment 5144427View attachment 5144429View attachment 5144431View attachment 5144433
Build Changelog
RROS-Q-8.6.4-20201117-DRG-Unofficial
Latest Rom source
November Security patch
Force encryption disabled
BT audio fixed
RROS-Q-8.6.5-20201212-DRG_sprout-Unofficial
Latest Rom source
December Security patch
Force encryption disabled
RROS-Q-8.6.5-20201228-DRG_sprout-Unofficial
Latest Rom source
Battery stat Fixed
Force encryption disabled
RROS-Q-8.6.6-20210126-DRG_sprout-Unofficial
Latest Rom source
Fingerprint issues also fixed now
Force encryption enabled this time
RROS-Q-8.6.8-20210509-DRG_sprout-Unofficial
Latest Rom source
Prepare for selinux Enforcing
RROS-Q-8.6.7-20210415-DRG_sprout-Unofficial
Latest Device Source
Final selinux Enforcing Build
RROS-Q-8.6.8-20210509-DRG_sprout-Unofficial
Latest Device Source
selinux Enforcing Build
Disabled force Encryption
Adding smart pixel QS Tile
Adding MotoAction Gestures From merlin
April Security patch
RROS-Q-8.6.9-20210518-DRG_sprout-Unofficial
Latest Device Source
selinux Enforcing Build
Disabled force Encryption
Adding smart pixel QS Tile
Adding MotoAction Gestures From merlin
May Security patch
good rom, hope this project continues
Battery stats work?
SatrioDwiPrabowo said:
Battery stats work?
Click to expand...
Click to collapse
No..Still Rip..
SatrioDwiPrabowo said:
Battery stats work?
Click to expand...
Click to collapse
Now it fixed with RROS-Q-8.6.5-20201228-DRG_sprout-Unofficial
ArcherTanu said:
Build Changelog
RROS-Q-8.6.4-20201117-DRG-Unofficial
Latest Rom source
November Security patch
Force encryption disabled
BT audio fixed
RROS-Q-8.6.5-20201212-DRG_sprout-Unofficial
Latest Rom source
December Security patch
Force encryption disabled
RROS-Q-8.6.5-20201228-DRG_sprout-Unofficial
Latest Rom source
Battery stat Fixed
Force encryption disabled
Click to expand...
Click to collapse
I use microg and not gapps, at build 12 12 notification sound bug, so i back to November build, is fixed on last build?
ArcherTanu said:
Now it fixed with RROS-Q-8.6.5-20201228-DRG_sprout-Unofficial
Click to expand...
Click to collapse
Thanks for ur hardwork
[Deleted]
@ArcherTanu Is it possible to reenable encryption after installation or the encryption is completly disabled ?
Graveen said:
@ArcherTanu Is it possible to reenable encryption after installation or the encryption is completly disabled ?
Click to expand...
Click to collapse
just force encryption is disabled
Anyone using this ROM?
Everything stable? Asking for daily use,
Finger Print issues fixed from RROS-Q-8.6.6-20210126-DRG_sprout-Unofficial this build and force encryption also enabled.
BladeRunnerA2C said:
Anyone using this ROM?
Everything stable? Asking for daily use,
Click to expand...
Click to collapse
This is, undoubtly.
is there any audio issues in RROS-Q-8.6.7-20210219-DRG_sprout-Unofficial this build..??
testing RN !
ArcherTanu said:
is there any audio issues in RROS-Q-8.6.7-20210219-DRG_sprout-Unofficial this build..??
Click to expand...
Click to collapse
Not really, perhaps a bit better.
It seems like the volume level is exponential, it saturates really quick.Even when not using internal speakers - it saturates also with bluetooth.
I should give a try at viper4android if is still exists.
ArcherTanu said:
is there any audio issues in RROS-Q-8.6.7-20210219-DRG_sprout-Unofficial this build..??
Click to expand...
Click to collapse
Anyhow @ArcherTanu your RROS build is the most polished of all. Kudos !
ArcherTanu said:
is there any audio issues in RROS-Q-8.6.7-20210219-DRG_sprout-Unofficial this build..??
Click to expand...
Click to collapse
Hi I had an issue with ringtone, notification and alarms sound not working in this build, Anyone else experiencing this issue?
I tried to install this rom but whenever i flash gapps rom did not boot
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Download
RECOVERY: Androidfilehost twrp-3.0.0-0-idol347-f2fs.img
ROM: Androidfilehost cm-12.1-20160209-UNOFFICIAL-idol347.zip
GAPPS: OpenGAPPS
Changelog
Code:
Current changelog: 2016-04-05
- Security Patchlevel April
- support 6039H
- small changes from upstream
Older changelogs:
Code:
2016-02-09
- Security Patchlevel February
- fixed some selinux denials
- removed obsolete script for variant identification
2016-01-31
- added support for 6039J (thanks @Faustop)
- lockscreen rotation toggle should now work as expected
- removed some unused services (thanks @Unjustified_Dev)
- added sepolicy (might cause some issues, please test)
2016-01-14
- fix inverted camera for those with samsung rear cam (confirmation needed)
- lockscreen rotation can be toggled now
- Security Patchlevel January
2016-12-09
- Now supports A, K,S and Y models (If you have another variant, please refer to [URL="http://forum.xda-developers.com/showpost.php?p=64000973&postcount=57"]this post[/URL])
- minor changes to camera
- Security Patchlevel December
2015-11-27
- Now supports A, K and Y models (If you have another variant, please refer to [URL="http://forum.xda-developers.com/showpost.php?p=64000973&postcount=57"]this post[/URL])
- LTE can now be chosen as preferred network
- added tethering options
- fixed writing to sd card
Detailed changelog:
https://github.com/pivoq/android_device_alcatel_idol347/compare/aa2b95e...pivoq:3df7e26
2015-11-18
- fixed regression which prevented access to bootloader
- added some missing camera blobs
- removed lots of unused stuff
- added some system.prop optimizations from upstream cm
2015-11-15
- added option to disable battery light
- added support for f2fs filesystem on /data and /cache (requires recovery that supports it, e.g [URL="https://www.androidfilehost.com/?fid=24269982086999020"]this one[/URL])
2015-11-09
- initial release
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@Unjustified Dev
@petrov.0
@ashwin007
XDA:DevDB Information
CyanogenMod 12.1 for Alcatel ONETOUCH IDOL 3 4.7, ROM for the Alcatel Onetouch Idol 3
Contributors
pivoq, Unjustified Dev, petrov.0
Source Code: https://github.com/pivoq/android_device_alcatel_idol347
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-11-09
Last Updated 2016-04-06
Reserved
As requested, here's a thread for the 4.7" device. The build runs fine on my end without any major flaws (6039Y), however I expect rough edges on other device variants, especially those featuring dual sim functionality.
So please give feedback and provide logs if you find any bugs.
I really don't want this to be a one man show, so I encourage everyone willing to build/contribute to check out my github and get involved!
Oh! great
First release going to test this
Thanks @pivoq :good:
Can someone post a fleshable kernel for this rom. I'll try to mod it a little. Maybe it can overclock a bit, just to try smth new.
P.S CM rom is great, minor bugs, but it's nothing.
Nelle9900 said:
Can someone post a fleshable kernel for this rom. I'll try to mod it a little. Maybe it can overclock a bit, just to try smth new.
P.S CM rom is great, minor bugs, but it's nothing.
Click to expand...
Click to collapse
Could you please be more specific on what bugs you are talking about
too bad there is no stock camera
pivoq said:
Could you please be more specific on what bugs you are talking about
Click to expand...
Click to collapse
Sometimes terbuchet or what else, stopped working. I do factory reset today and i didn't see again that problem. Maybe it fixed the problem, consider that solved.
Personaly i do not like dbl tap on status bar to lock screen, but better that then nothing.
One thing i noticed when i place a call, that is seems to be to quiet sound. I can't sometimes clearly hear what is person talking to me. But not a big problem, it heppens sometimes.
Problem on instagram is solved with this rom. On 5.0.2 I have video problem on instagram, video do not play always.
My recommendation is kernel tweaks, maybe some minor overclocking to cpu and gpu, just for test, maybe that will speed up a lilttle bit this respectable device we have.
Best regard man and sorry for my bad english
And can someone post fleshable kernel of this rom? Thanks in advance.
Nelle9900 said:
Personaly i do not like dbl tap on status bar to lock screen, but better that then nothing.
Click to expand...
Click to collapse
You can disable it in settings
Nelle9900 said:
And can someone post fleshable kernel of this rom? Thanks in advance.
Click to expand...
Click to collapse
What do you mean exactly? You can flash the boot.img using fastboot. And the kernel source is on github.
thanks to make this for 4.7. system working faster than stock.
- nice audio equalizer but black player got better
- there is cm camera but missing some manual options like shutter speed - so i wait for change this
- double tap to on/off - there is trick to use gesture with nova launcher and app "screen off and lock" but when you are in lock screen tap working only around status bar
pivoq said:
You can disable it in settings
What do you mean exactly? You can flash the boot.img using fastboot. And the kernel source is on github.
Click to expand...
Click to collapse
I know that u can disable it, i didn't mean that, i love that option, but personaly didn't like to tap on status bar, it's better to tap on screen (midlle of screen). But it's okay man
Kernel - i don't know how to download fleshable kernel from github
I wont to mod the kernel, set a higher freq for cpu and gpu = overclock. If you know how to download and make a flashable kernel i will mod it.
First post was updated with latest build.
Current changelog: 2015-11-14
- added option to disable battery light
- added support for f2fs filesystem on /data and /cache (requires recovery that supports it, e.g this one)
Google service isn't working.
I can't login.
"Unfortunately, Google has stopped play services."
I tried opengapps pico, nano, stock, super.
Older versions work fine
Same problem here, opengapps crashing, i will try with an older version of gapps
edit: still fc, even with 04-04-2015 gapps 5.1.1 version :-s
logs or didn't happen
hope it helps
(I archived it, because it was over the 500kb limit requested from the forum..)
Scutariu said:
hope it helps
(I archived it, because it was over the 500kb limit requested from the forum..)
Click to expand...
Click to collapse
Thank you, apparently there went something wrong building chromium webview.
I will probably have a fresh build by tomorrow. In the meantime can you try if installing "Android System Webview" from play store fixes the issue?
pivoq said:
Thank you, apparently there went something wrong building chromium webview.
I will probably have a fresh build by tomorrow. In the meantime can you try if installing "Android System Webview" from play store fixes the issue?
Click to expand...
Click to collapse
I can't acces play store, when I try to add my google account, it crashes automatically
Scutariu said:
I can't acces play store, when I try to add my google account, it crashes automatically
Click to expand...
Click to collapse
https://www.apkmirror.com/apk/googl...ebview-47-0-2526-61-arm-android-apk-download/
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for unofficial LineageOS 14.1 builds for Xiaomi Mi Note 3. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
you tell me
Hint:
As Xiaomi hasn't released kernel source for the device, this ROM uses prebuilt kernel from stock
Before flashing this ROM, make sure you've installed MIUI9(the latest is recommended)
Currently kernel&blobs are pulled from miui_MINote3_8.3.8_6a211e88cf_7.1
Changelog:
2017/12/17:
Initial release
2018/02/03:
Sync latest LineageOS source
Switch to OSS kernel, based on LA.UM.6.1.r1-11600-sdm660.0
Allow swapping app switch key and back key
Pocket mode
Allow disabling capacitive keys and enabling virtual keys
Livedisplay CABC & color enhancement
sdcardfs
Switch to bfq I/O scheduler
2017/02/05:
Sync latest LineageOS source
Fix mic when recording videos
Workaround time_daemon crash after applying pti patches
2017/03/10:
Sync latest LineageOS source
Update kernel to CAF LA.UM.6.1.r1-12000-sdm660.0
Fixed unbanlanced irq for fpc fingerprint sensor
Fixed battery stats
Update proprietary blobs
2017/03/14:
Sync latest LineageOS source
Misc kernel fixes&improvements
More robust fingerprint sensor detecting
Fixed green screen in Snap video mode
Fixed NFC firmware downloading
2017/03/16:
Sync latest LineageOS source
Fixed widevine DRM
2017/03/18:
Sync latest LineageOS source
Fixed quick charge
Set GPU idle freq to 160MHz
2017/04/22:
Sync latest LineageOS source
Fixed tethering
Pulled blobs from latest MIUI dev
2017/04/23:
Fixed wifi when secure boot enabled
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (https://forum.xda-developers.com/android/development/recovery-unofficial-twrp-3-0-3-0-touch-t3716806 is recommended)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
Reboot
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
https://androidfilehost.com/?fid=746010030569970581
XDA:DevDB Information
LineageOS, ROM for all devices (see above for details)
Contributors
dianlujitao
Source Code: https://github.com/MiNote3Dev
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
Version Information
Status: Snapshot
Created 2017-12-17
Last Updated 2018-04-23
Xiaomi has released the kernel source of jason, will you continue to support this? @dianlujitao
Thank you and looking forward on your response.
chonghua said:
Xiaomi has released the kernel source of jason, will you continue to support this? @dianlujitao
Thank you and looking forward on your response.
Click to expand...
Click to collapse
I'll release a new build with OSS kernel and bug fixes&new features soon.
dianlujitao said:
I'll release a new build with OSS kernel and bug fixes&new features soon.
Click to expand...
Click to collapse
Why arent you make a thread for mokee rom? Sorry if my question isnt related with this thread.
Amazing job!
I've flashed the latest version and tested it today. Runs really really smooth. Amazing job! :good:
There is a problem with the internal mic(s). It works only for sim calls. I tried recording a video and also I did a video call but there was no audio recording from the mic(s). But instead I connected a headset, and the mic audio from the headset worked.
I'll still use this rom as my daily driver, I just can't stand MIUI!
Looking forward for future updates
Home button doesn't work
I tried this rom and the home button doesn't work.
Gabriele1311 said:
I tried this rom and the home button doesn't work.
Click to expand...
Click to collapse
For me it works, but sometimes it doesn't. I relock the phone and then it works again. Weird
LordTonoicu said:
For me it works, but sometimes it doesn't. I relock the phone and then it works again. Weird
Click to expand...
Click to collapse
Maybe pocket mode doesn't work well with fpc fingerprint sensor. My device uses goodix so I blindly implemented for fpc.
When screen is black and proximity sensor is covered, fingerprint sensor will stop work, this is expected behavior. Can be disabled in Settings->Additional buttons. goodix works as expected but idk how it works with fpc.
Thank you for making the rom. Hope Mi Note 3 will have the sub forum soon!
dianlujitao said:
My device uses goodix so I blindly implemented for fpc.
Click to expand...
Click to collapse
My fpc scanner/button does not work at all.
Also safetynet test fails on CTS profile.
dianlujitao said:
I'll release a new build with OSS kernel and bug fixes&new features soon.
Click to expand...
Click to collapse
Thank you very much for responding mate! More power!
It is possible to use stock camera with portrait mode. Google camera don't work properly
This is so great! thanks @dianlujitaon.
Great Work, Thanks @dianlujitao
dromaczek said:
It is possible to use stock camera with portrait mode. Google camera don't work properly
Click to expand...
Click to collapse
It is possible if it is ported to LOS14 of this device.
LordTonoicu said:
For me it works, but sometimes it doesn't. I relock the phone and then it works again. Weird
Click to expand...
Click to collapse
I reinstalled a lot of times this Rom, I updated to latest version (05/02) and the home button doesn't work...Are there more than one button model?
dromaczek said:
It is possible to use stock camera with portrait mode. Google camera don't work properly
Click to expand...
Click to collapse
Hey there, I flashed this https://forum.xda-developers.com/showpost.php?p=74893764&postcount=1431 and it works, kinda. I mean the portrait mode works , but right after you take the photo, the app crashes but the photo is still saved.
Update: I flashed the latest version (05/02) and the mic works. I also deactivated "Prevent accidental wake-up" and the fingerprint works all the time, and also the battery life seems to have improved, or it might be just me
Amazing job. Thanks a ton @dianlujitao !
Hi, i installed latest nightly.. Look this video i took. LTE signal bar is dropping up and down..
https://youtu.be/SWmGAbbzwi0
What is not working in the last version of the rom?
Thanks a lot
xtreme97 said:
What is not working in the last version of the rom?
Thanks a lot
Click to expand...
Click to collapse
Everythig exept photo is ok,
PHOTO: dont work portret mode, dont work zoom 2x etc. No port of Mi Camera. Unusable cause cant use photo dual camera. No sense to install then. Dont do it, cause you cant use photo dual camera!
Last Build
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway. You are responsible if anything goes wrong with your device.
CPU underclocked to 1.4ghz by default for better battery.
What is Working:
Everything.
Let me know if you find any bugs.
Downloads
Dolby Atmos:
[12/29/17] Collective Dolby Atmos® Port Thread [Unity/AML] Download
ROM
[Stable] Lineage OS 14.1 [Build 04-27-2018] Download
Open GApps
Choose ARM64 & 7.1 Download
Super User
SuperSu [STABLE][2017.05.27] SuperSU v2.82 Flashable Zip Download
[2018.1.1] Magisk v15.2 - Root & Universal Systemless Interface [Android 5.0+] Download
1. Wipe data, cache, system, and Dalvik cache
2. Flash ROM and Gapps(Pick GApps of your choice)
3.Reboot
Download the Latest Build (06/26/2018)
Added new july build with OMS.
Do share the experience.
Thanks to:
@VenkatVV
@wisniapl
@joshi1
@sscsps
@Psycho-Mods
@Abhi_
Don't post on another forum without my permission. Don't create a mirror for the file, if needed let me know.
XDA:DevDB Information
Lineage OS, ROM for the LeEco Le 1S
Contributors
superac11
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: EUI 17s+ & TWRP 3.0+
Based On: Lineage OS
Version Information
Status: Stable
Current Stable Version: K14.1_062218
Stable Release Date: 2018-03-16
Current Beta Version: 2018-02-28
Created 2018-01-07
Last Updated 2018-06-26
Reserved
Updates.....
2018-07-12
-------New testing build with OMS
2018-06-26
------June Security Patches.
------Last build of LOS 14.1
------Hotspot works fine now.
------
2018-04-27
-----April Security update
-----Underclock the CPU to 1.4ghz by default.
-----Maybe some battery improvement expected.
2018-03-16
-----Fixed the Tethering & Portable Hotspot
-----4k Recording Still not working [WIP]
2018-03-07
----Updated January security patch to February
----Changed the video decoder to HEVC for better compression.
----Changed the audio bitrate of the video recording.
----Minor changes to the source.
2018-03-01
----Fixed 720p60fps and 1080p lag Youtube Bug [1080p60fps not working]
----Added 4k recording option on camera [Can't record 4k] [WIP]
----Updated December security patch to January
----Front Camera Now support 1080p Video recording
----Added more camera resolutions.
----and minor changes
Which security patch does this have ?
Fighting Phantom said:
Which security patch does this have ?
Click to expand...
Click to collapse
December 2017
Found a bug, hope you help me
Hotspot isn't working, it turns on and then says 'error'
Screen brightness goes lower and lighter randomly, even with auto brightness off
When I unplug the charger, and plug it again, phone doesn't recognize it, I have to reboot phone in order to charge it normally
How to use navigation bar just lyk pixel xl .....?
Jhossweb14 said:
Found a bug, hope you help me
Hotspot isn't working, it turns on and then says 'error'
Screen brightness goes lower and lighter randomly, even with auto brightness off
When I unplug the charger, and plug it again, phone doesn't recognize it, I have to reboot phone in order to charge it normally
Click to expand...
Click to collapse
I just checked the hotspot, will work on the fix and release new build soon. But i didn't find the other bugs you mentioned. Did you do clean flash ?
[email protected] said:
How to use navigation bar just lyk pixel xl .....?
Click to expand...
Click to collapse
Goto Settings-> Buttons-> Enable on-screen nav bar, turn it on.
superac11 said:
I just checked the hotspot, will work on the fix and release new build soon. But i didn't find the other bugs you mentioned. Did you do clean flash ?
Click to expand...
Click to collapse
Yes, I did, but I'm still having those issues, it's annoying because I can't normally charge my phone, please do something if you can. Thanks for this AMAZING rom
Jhossweb14 said:
Yes, I did, but I'm still having those issues, it's annoying because I can't normally charge my phone, please do something if you can. Thanks for this AMAZING rom
Click to expand...
Click to collapse
Can you try this build and let me know if the bugs are fixed ?
https://drive.google.com/file/d/1Sh3JIMVRb-k8RRt92b36ONphYz4kDoHA/view?usp=sharing
superac11 said:
Can you try this build and let me know if the bugs are fixed ?
https://drive.google.com/file/d/1Sh3JIMVRb-k8RRt92b36ONphYz4kDoHA/view?usp=sharing
Click to expand...
Click to collapse
In this build there is the brightness slider bug where the brightness slider doesn't work even when the ambient display setting is off.
NO OS
superac11 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway. You are responsible if anything goes wrong with your device.
What is Working:
Everything except hotspot.
Stock Browser video playback show inverted color, use chrome or any other browser.
Let me know if you find any bugs.
Downloads
Dolby Atmos:
[12/29/17] Collective Dolby Atmos® Port Thread [Unity/AML] Download
ROM
[Old] Lineage OS 14.1 [Build 01-07-2018] Download
[New] Lineage OS 14.1 [Build 03-01-2018] Download
Open GApps
Choose ARM64 & 7.1 Download
Super User
SuperSu [STABLE][2017.05.27] SuperSU v2.82 Flashable Zip Download
[2018.1.1] Magisk v15.2 - Root & Universal Systemless Interface [Android 5.0+] Download
1. Wipe data, cache, system, and Dalvik cache
2. Flash ROM and Gapps(Pick GApps of your choice)
3.Reboot
Update 2017-03-01
----Fixed 720p60fps and 1080p lag Youtube Bug [1080p60fps not working]
----Added 4k recording option on camera [Can't record 4k] [WIP]
----Updated December security patch to January
----Front Camera Now support 1080p Video recording
----Added more camera resolutions.
----and minor changes
There are 2 file in the Folder
The file with name "Testing***.zip" is the new build which I am testing. (this has 1080p video recording on front cam"
The file with name "Tested***.zip" is the rom without 1080p recording on front cam.
Do share the experience.
Thanks to:
@VenkatVV
@wisniapl
@joshi1
@sscsps
@Psycho-Mods
@Abhi_
Don't post on another forum without my permission. Don't create a mirror for the file, if needed let me know.
XDA:DevDB Information
Lineage OS, ROM for the LeEco Le 1S
Contributors
superac11
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: EUI 17s+ & TWRP 3.0+
Based On: Lineage OS
Version Information
Status: Stable
Current Stable Version: K14.1_030118
Stable Release Date: 2018-01-07
Created 2018-01-07
Last Updated 2018-03-01
Click to expand...
Click to collapse
I HAVE an EUI 5.5.010S and i dont have any operating system ! do you have another Lineage can work for me ?
Amrati23 said:
I HAVE an EUI 5.5.010S and i dont have any operating system ! do you have another Lineage can work for me ?
Click to expand...
Click to collapse
I don't have any for EUI 5.5.010s. You need to update to EUI 5.9.017s first to install this ROM. As well as need root and TWRP.
Hotspot
Please fix hotspot then it would be perfect.
BTW why hotspot is not working in this rom whereas there's no bug like this in other roms?
mrlos_blancos said:
Please fix hotspot then it would be perfect.
BTW why hotspot is not working in this rom whereas there's no bug like this in other roms?
Click to expand...
Click to collapse
I am working on it, using the hotspot fix from other rom makes the build unbootable so it will take some time.
Can I use it with x507, I'm Little confused
Ascoolas said:
Can I use it with x507, I'm Little confused
Click to expand...
Click to collapse
Yes you can
There are following few things I've noticed:
superac11 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway. You are responsible if anything goes wrong with your device.
Downloads
Dolby Atmos:
[12/29/17] Collective Dolby Atmos® Port Thread [Unity/AML] Download
ROM
[Old] Lineage OS 14.1 [Build 01-07-2018] Download
[New] Lineage OS 14.1 [Build 03-01 to 03-07-2018] Download
Open GApps
Choose ARM64 & 7.1 Download
Super User
SuperSu [STABLE][2017.05.27] SuperSU v2.82 Flashable Zip Download
[2018.1.1] Magisk v15.2 - Root & Universal Systemless Interface [Android 5.0+] Download
1. Wipe data, cache, system, and Dalvik cache
2. Flash ROM and Gapps(Pick GApps of your choice)
3.Reboot
Youtube 720p60fps works fine for me, i have tested it. Try to do clean install.
Bugs
Everything except hotspot.
Stock Browser video playback show inverted color, use chrome or any other browser.
Let me know if you find any bugs.
Do share the experience.
Thanks to:
@VenkatVV
@wisniapl
@joshi1
@sscsps
@Psycho-Mods
@Abhi_
Don't post on another forum without my permission. Don't create a mirror for the file, if needed let me know.
XDA:DevDB Information
Lineage OS, ROM for the LeEco Le 1S
Contributors
superac11
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: EUI 17s+ & TWRP 3.0+
Based On: Lineage OS
Version Information
Status: Stable
Current Stable Version: K14.1_030718
Stable Release Date: 2018-01-07
Created 2018-01-07
Last Updated 2018-03-07
Click to expand...
Click to collapse
1. I can't finf 'on screen navigation buttons' option in buttons menu in settings
2. I can't use mobile data, i don't know why. even when all settings are rightly done.
3. Google keyboard keeps on crashing wehn you go to personalize it
Please tell me what can be done!
his_remains said:
1. I can't finf 'on screen navigation buttons' option in buttons menu in settings
2. I can't use mobile data, i don't know why. even when all settings are rightly done.
3. Google keyboard keeps on crashing wehn you go to personalize it
Please tell me what can be done!
Click to expand...
Click to collapse
1) Use build.prop editor and add the line qemu.hw.mainkeys=1
(0 to turn off and 1 to turn on)
2) Data Works fine, check your APN setting.
3) Google keyboard works fine for me
Seems like you dirty flash the Rom. So try by wiping cache, dalvik cache and data.
OR
Clean install the rom.
Not getting fixed.
superac11 said:
1) Use build.prop editor and add the line qemu.hw.mainkeys=1
(0 to turn off and 1 to turn on)
2) Data Works fine, check your APN setting.
3) Google keyboard works fine for me
Seems like you dirty flash the Rom. So try by wiping cache, dalvik cache and data.
OR
Clean install the rom.
Click to expand...
Click to collapse
1) I tried turning on(but it worked by assigning the value '0' to it instead of '1') the mainkeys using build.prop editor and restarting the device, and it worked
2) Mobile data worked after I re-checked my APN settings.
I clean installed the ROM, but
3) While configuring google keyboard settings it still crashes.
Code:
/*
* Your warranty is now maybe void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
Near pure CAF rom with only small modifications to allow building and make device useable.
Download: here
Install instructions:
Make sure you are on firmware version 10.0.0 Hotfix 1
Clear system, vendor, data, cache, dalvik-cache
Install zip
Install Gapps
Done
Kernel source: https://github.com/Just-CAF/platform_kernel_oneplus_msm8998
XDA:DevDB Information
Just CAF, ROM for the OnePlus 5
Contributors
T1mb3, spirtix, Men_in_black007, codeworkx, LineageOS
Source Code: [url]https://github.com/Just-CAF[/URL]
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: CAF
Version Information
Status: Stable
Stable Release Date: 2019-11-04
Created 2019-10-15
Last Updated 2020-08-03
Real-life stats:
Thanks ss )
Yes, thank
wow nice caf
Ultra-lite like Slim Roms is what we have been missing for Oneplus 5, Newer android version to start with is the way to go for me. Thanks a lot.
Added to the OnePlus 5 Index Thread here.
For the first time, I read up on what CAF really means. So now I'm looking very much forward to this ROM becoming more stable!
Thank you for developing!
New build: download
Changelog 20191016:
Fix outgoing phone calls
Fix microphone in calls
Add missing package Styles and wallpapers (com.android.wallpaper)
T1mb3 said:
New build: download
Changelog 20191016:
Fix outgoing phone calls
Fix microphone in calls
Add missing package Styles and wallpapers (com.android.wallpaper)
Click to expand...
Click to collapse
thanks for update
btw any telegram grup for this rom bro?
T1mb3 said:
Issues:
Security
Sepolicy
Selinux permissive
Tri-state -key
Stock camera app
Encryption
Click to expand...
Click to collapse
I'm unsure how these issues would affect me. Can anyone explain?
Does the encryption issue mean that encryption doesn't work at all?
Rydberg1 said:
I'm unsure how these issues would affect me. Can anyone explain?
Does the encryption issue mean that encryption doesn't work at all?
Click to expand...
Click to collapse
Your device will be less secure, as there is practically no sepolicy at all to prevent bad stuff from happening.
Encryption is not working (or has not been tested) so if your data is encrypted, the rom will not boot.
T1mb3 said:
Your device will be less secure, as there is practically no sepolicy at all to prevent bad stuff from happening.
Encryption is not working (or has not been tested) so if your data is encrypted, the rom will not boot.
Click to expand...
Click to collapse
I see. Thanks for the quick reply! To be on the safe side, I think I will wait a little bit with installing the ROM.
Can anyone tell me if it is valid for daily use?
Customization?
How would one be able to do this for the 5/T?
freyrnygaard said:
How would one be able to do this for the 5/T?
Click to expand...
Click to collapse
All source are here
The ROM manifest is here
It should be doable just by including 5T's device tree and vendor files. However the device tree will probably need some modifications to work with our build system.
New build: download
Changelog 20191022:
Fix encryption. Encrypt instructions
Merge CAF-tag LA.UM.8.4.r1-04500-8x98.0
Nice work! Can you please make one for 5t too?
Flashed last build on my device decrypted : bootllop
Clean flash: rom , gapps, magisk , no-verity
morfances said:
Flashed last build on my device decrypted : bootllop
Clean flash: rom , gapps, magisk , no-verity
Click to expand...
Click to collapse
No need for no-verity yet.
Your issue is propably Magisk. Try to first boot the rom and only after that, flash Magisk.
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended
When viperos q?
Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip
Thanks for the rom, what base is needed?, is November security patch?
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
opal06, kudos for signature spoofing built-in, I can use microG.
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.
Plis build with nitrogen kernel
test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident
schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right
Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?
good job
I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP