(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8937-BC.12
(bootloader) product: montana
(bootloader) board: montana
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 5
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG RX64MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: MSM8937
(bootloader) serialno: ZY322Q2DZQ
(bootloader) cid: 0x00FF
(bootloader) channelid: 0x00
(bootloader) uid: 2CF0D7BF00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 359574083302191
(bootloader) meid:
(bootloader) date: 06-20-2018
(bootloader) sku: XT1795
(bootloader) carrier_sku:
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Jul 16 9:14:51 UTC 1972"
(bootloader) ro.build.fingerprint[0]: motorola/montana/montana:8.1.0/OPP
(bootloader) ro.build.fingerprint[1]: S28.65-37-7-6/4cc5a:user/release-k
(bootloader) ro.build.fingerprint[2]: eys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.28.271.7.montana.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-08600-89xx.0
(bootloader) version-baseband: M8937_37.13.03.72u MONTANA_INDIADSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g26d4309 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Wed Jun 26 06:06:58 CDT
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBC.12-0-g77d3670
(bootloader) rpm.git: git=bd76357-dirty
(bootloader) tz.git: git=9a0b157
(bootloader) devcfg.git: git=9a0b157
(bootloader) keymaster.git: git=9a0b157
(bootloader) cmnlib.git: git=9a0b157
(bootloader) cmnlib64.git: git=9a0b157
(bootloader) prov.git: git=9a0b157
(bootloader) aboot.git: git=MBM-NG-VBC.12-0-g0b9dae9
(bootloader) frp-state: protected (144)
(bootloader) ro.carrier: unknown
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.094s
deepa007 said:
(bootloader) reason: Reboot mode set to fastboot
Click to expand...
Click to collapse
this is it
did you use a script to flash stock or did you flash all parts step by step?
at the beginning there is a
fastboot oem fb_mode_set this means fastboot always reboots to bootloader/fastboot to make sure all is done before reboot to system
at the end, when all files are flashed and all /data /cache etc is erased there is a
fastboot oem fb_mode_clear to clear the lock
fastboot reboot
done
zitronenmelissa said:
this is it
did you use a script to flash stock or did you flash all parts step by step?
at the beginning there is a
fastboot oem fb_mode_set this means fastboot always reboots to bootloader/fastboot to make sure all is done before reboot to system
at the end, when all files are flashed and all /data /cache etc is erased there is a
fastboot oem fb_mode_clear to clear the lock
fastboot reboot
done
Click to expand...
Click to collapse
yeah then also i stuck stuck on fastboot
mode
Try booting the phone to bootloader from fastboot command through system. Then you can copy the rom to internal storage and then flash directly.
deepa007 said:
yeah then also i stuck stuck on fastboot
mode
Click to expand...
Click to collapse
how did you flash stock? with a script or step by step? which firmware did you choose?
here is a good HowTo: https://forum.xda-developers.com/t/...latam-ora-playpl-retail-retru-trueth.3845848/
you can boot twrp with fastboot: fastboot boot twrp-name.img
then you should backup efs / persist to sdcard first if you haven't done that already.
then format data in wipe menu (agree with YES) and reboot
rdbhadri said:
Try booting the phone to bootloader from fastboot command through system. Then you can copy the rom to internal storage and then flash directly.
Click to expand...
Click to collapse
Please tell me the steps how to do
Related
I've been trying to root and install Lineage 16.0 on my Z2 force TMO XT1789-04 for a few weeks now.
I was able to unlock the bootloader on Motorola's website no problem.
The phone has been updated to OCXS 27.1.7.
When I run getprop ro.bootloader, MBM-3.0-nash_tmo-1f35305-190705 is my result. This didn't verify if my bootloader was OCSX, so I ran the getvar all command in fastboot, and the output said I was running MBM-3.0-nash_tmo-1f35305-190705 in slot _b. I will post all the info at the end of the post.
Earlier I made the mistake of moving ahead to set the bootloader partition to slot _a. Luckilly I didn't brick my phone. I used the following commands with no luck .
fastboot set_active other
fastboot set_active a
fastboot –set-active=_aslot
fastboot –set-active=_a
What am I doing wrong? Should I give up? I'd rather sell my phone than brick it.
If someone could point me in the right direction I'd appreciate it!!!.
Thanks!
fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_tmo-1f35305-190705
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA_UMTS
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224B9BP4
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 14905111
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: ****(deleted)
(bootloader) meid:
(bootloader) date: 07-26-2017
(bootloader) sku: XT1789-04
(bootloader) carrier_sku:
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 4379
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_tmo_c/nash:8.0.0/OCX
(bootloader) ro.build.fingerprint[1]: S27.109-51-14-7/12:user/release-ke
(bootloader) ro.build.fingerprint[2]: ys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.351.12.nash_tmo_c
(bootloader) ro.build.version.full[1]: .tmo.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: M8998TMO_20207.117.02.41.08R NUS
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g5b6c26aa-0177
(bootloader) kernel.version[1]: 2-g1e9c9a2 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.9.x 20150123 (prerelease) (GCC) )
(bootloader) kernel.version[3]: #1 SMP PREEMPT Fri Jul 5 12:49:00 CDT 2
(bootloader) kernel.version[4]: 019
(bootloader) git:abl: MBM-3.0-nash_tmo-1f35305-190705
(bootloader) git:xbl: MBM-3.0-nash_tmo-9869834-190705
(bootloader) gitmic: MBM-3.0-nash_tmo-9869834-190705
(bootloader) git:rpm: MBM-3.0-nash_tmo-b13e14f-190705
(bootloader) git:tz: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:hyp: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:devcfg: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:cmnlib: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:cmnlib64: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:keymaster: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:storsec: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) gitrov: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tmo
(bootloader) current-slot: _b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 3
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 6
Why do u have to do all of this to just install lineage 16?
I'm on T-Mobile too and I just simply:
1- fastboot flashed the pre-los zip
2- follow the normal procedure for flashing Los (although it took time to find the right twrp version actually working, many didn't flashed successfully) + magisk for root
3- mind my tmo Z2 force was already on Oreo...
Use twrp 3.3.0.0.img to flash with, I wouldn't worry about installing twrp since the updater uses Los recovery. If you must insstall twrp 3.3.1.0.zip is solid I believe. Not sure why 3..3.0.0.zip isn't there, but I have the zip if needed.
I tried to install TWRP 3.3.0-0 using fastboot flash boot (path to) twrp.img
I wasn't able to get TWRP installed. Am I using the wrong commands or twrp image?
Google_is_Watching said:
I tried to install TWRP 3.3.0-0 using fastboot flash boot (path to) twrp.img
I wasn't able to get TWRP installed. Am I using the wrong commands or twrp image?
Click to expand...
Click to collapse
You'll need to run fastboot boot twrp.img once it boots to TWRP you can use the install option within TWRP to install the twrp.zip file
rcmaehl said:
You'll need to run fastboot boot twrp.img once it boots to TWRP you can use the install option within TWRP to install the twrp.zip file
Click to expand...
Click to collapse
It worked!!! I feel dumb but grateful. Thank you!
Hello,
i need help trying to revive this motog8 play, i can do everything with the old models, but at the first time i tried to root those A/B systems, i bricked it and i think its ded.
Tried revive with rds, but doesnt recognice the xml file and the usb port, LSMA doesnt have the model yet, and by the fastboot still the same.
The server looks pretty empty, if no one can help i think its going to the thrash, cuz the techs here in my city doesnt flash devices, just change screens haha :')
Start Up Failed:
AP Fastboot Flash Mode (Secure)
No Bootable A/B Solt
Please, help, since i buy this stupid device i tried to install magisk and it died haha
Matiasfh01 said:
Hello,
i need help trying to revive this motog8 play, i can do everything with the old models, but at the first time i tried to root those A/B systems, i bricked it and i think its ded.
Tried revive with rds, but doesnt recognice the xml file and the usb port, LSMA doesnt have the model yet, and by the fastboot still the same.
The server looks pretty empty, if no one can help i think its going to the thrash, cuz the techs here in my city doesnt flash devices, just change screens haha :')
Start Up Failed:
AP Fastboot Flash Mode (Secure)
No Bootable A/B Solt
Please, help, since i buy this stupid device i tried to install magisk and it died haha
Click to expand...
Click to collapse
Run
Code:
fastboot getvar all
and post it here (remove the IMEI line)
See
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
sd_shadow said:
Run
Code:
fastboot getvar all
and post it here (remove the IMEI line)
See
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Click to expand...
Click to collapse
I want to follow this close. This is 2nd or 3rd thread I have seen this failed to boot problem. It makes me second guess my choice to purchase one of these devices.
I have wondered if this phone, being Mtk soc, opens possibly to use sp flash tool for flashing and repair. This would be my first Moto device, but definitely not first Mtk. I am familiar and comfortable with sp flash tool. .
mrmazak said:
I want to follow this close. This is 2nd or 3rd thread I have seen this failed to boot problem. It makes me second guess my choice to purchase one of these devices.
I have wondered if this phone, being Mtk soc, opens possibly to use sp flash tool for flashing and repair. This would be my first Moto device, but definitely not first Mtk. I am familiar and comfortable with sp flash tool. .
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-d6ab3f7-190816
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=00 M8=12
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: ZY326QRN5Q
(bootloader) cid: 0x0032
(bootloader) channelid: 0x04
(bootloader) uid: 5F9D600C3FE92E5C000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 268435456
(bootloader) reason: No bootable A/B slot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 09-23-2019
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C51711
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Jan 1 22: 6: 0 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32_amx/lima:9/PMDS29
(bootloader) ro.build.fingerprint[1]: .70-70-2/ac5451:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.251.2.lima_32_amx
(bootloader) ro.build.version.full[1]: .amx.en.US
(bootloader) ro.build.version.mtk: alps-mp-p0.mp1.tc2sp-V1.47
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.146+ ([email protected]
(bootloader) kernel.version[1]: 55) (gcc version 4.9.x 20150123 (prerele
(bootloader) kernel.version[2]: ase) (GCC) ) #1 SMP PREEMPT Thu Dec 26 1
(bootloader) kernel.version[3]: 0:20:37 CST 2019
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: amxcl
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: no
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) pcb-part-no: SB28C56212
all: listed above
Matiasfh01 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-d6ab3f7-190816
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=00 M8=12
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: ZY326QRN5Q
(bootloader) cid: 0x0032
(bootloader) channelid: 0x04
(bootloader) uid: 5F9D600C3FE92E5C000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 268435456
(bootloader) reason: No bootable A/B slot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 09-23-2019
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C51711
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Jan 1 22: 6: 0 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32_amx/lima:9/PMDS29
(bootloader) ro.build.fingerprint[1]: .70-70-2/ac5451:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.251.2.lima_32_amx
(bootloader) ro.build.version.full[1]: .amx.en.US
(bootloader) ro.build.version.mtk: alps-mp-p0.mp1.tc2sp-V1.47
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.146+ ([email protected]
(bootloader) kernel.version[1]: 55) (gcc version 4.9.x 20150123 (prerele
(bootloader) kernel.version[2]: ase) (GCC) ) #1 SMP PREEMPT Thu Dec 26 1
(bootloader) kernel.version[3]: 0:20:37 CST 2019
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: amxcl
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: no
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) pcb-part-no: SB28C56212
all: listed above
Click to expand...
Click to collapse
So, based on what has been told. And the information in your post here. You need to use the boot.img from this firmware.
mirrors.lolinet.com >firmware >moto >lima_32 >official >AMXCL >XT2015-2_LIMA_32_AMX_9.0_PMDS29.70-70-2_subsidy-CLACLSL_regulatory-DEFAULT_CFC.xml.zip
https://mirrors.lolinet.com/firmwar...ubsidy-CLACLSL_regulatory-DEFAULT_CFC.xml.zip
mrmazak said:
So, based on what has been told. And the information in your post here. You need to use the boot.img from this firmware.
mirrors.lolinet.com >firmware >moto >lima_32 >official >AMXCL >XT2015-2_LIMA_32_AMX_9.0_PMDS29.70-70-2_subsidy-CLACLSL_regulatory-DEFAULT_CFC.xml.zip
https://mirrors.lolinet.com/firmwar...ubsidy-CLACLSL_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Doesnt work, or should i just flash the boot.img ?
Matiasfh01 said:
Doesnt work, or should i just flash the boot.img ?
Click to expand...
Click to collapse
Carefully, I have no experience with Moto. All I can say is from other device experience.
Based on the guide you quoted as followed. You downloaded firmware. Extracted the boot.img, patched that boot.img. then flashed it to slot_a and slot_b.
Then you had boot loop.
Was the firmware you downloaded the correct one that matches getvar output.(from before , not now). The firmware I linked matches getvar output from now.
And back to the question, yes try to just flash the boot.img from linked firmware to both boot_a and boot_b. Just like from the root guide, but with the stock images.
Matiasfh01 said:
Doesnt work, or should i just flash the boot.img ?
Click to expand...
Click to collapse
Code:
fastboot flash boot boot.img
You want to flash the same
Blur Software version
If not sure you could just
Flash the full firmware.
Edit
Sent from my ali using XDA Labs
sd_shadow said:
Code:
fastboot flash boot boot.img
You want to flash the same
Blur Software version
If not sure you could just
Flash the full firmware.
Edit
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
did both and didnt work, and no, the lsma doesnt support the device yet
(bootloader) is-logical:boot_a
(bootloader) : not found
Sending 'boot_a' (32768 KB) OKAY [ 0.720s]
Writing 'boot_a' OKAY [ 0.589s]
Finished. Total time: 1.362s
what does the not found mean?
I've never tried to unlock/root my z2 play (this one is my wife's), but it is now stuck in bootloader.
Selecting the options START, RECOVERY MODE, FACTORY MODE, BP TOOLS, and QCOM all fail with the same message:
Code:
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Since we never expected this issue to happen, usb debugging and allow oem unlock hasn't been enabled. We tried to use the "Rescue and Smart Assistant" from motorola, but it fails with:
Code:
Flashboot Flash Single Partition
Flash failed. Please try again
We are using the "ALBUS_C_OPSS27.76_12_28_20_cid50_subsidy_DEFAULT_regulatory_DEFAULT_CFC_SVC.xml" motorola suggested.
I've tried using fastboot and looking through various threads on using fastboot commands to flash stock firmware, but haven't found any success. Also tried doing the steps in the firmware's servicefile.xml with no success.
Here's the output from "fastboot getvar all":
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C0.CD
(bootloader) product: albus
(bootloader) board: albus
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SKHYNIX HCG8a4 RV=08 PV=A2 FV=00000000000000A2
(bootloader) ram: 4GB SKHYNIX LP3 DIE=8Gb M5=06 M6=03 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: ZY224WBXTH
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8d
(bootloader) uid: B4C8C53E00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 534773760
(bootloader) reason: Fall-through from normal boot mode
(bootloader) imei: --REMOVED--
(bootloader) meid:
(bootloader) date: 03-19-2018
(bootloader) sku: XT1710-01
(bootloader) carrier_sku:
(bootloader) battid: SNN5985A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 1 1:47:35 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/albus_c/albus:8.0.0/OPSS2
(bootloader) ro.build.fingerprint[1]: 7.76-12-28-20/19:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.461.19.albus_c.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8953P_41.50.07.67.03R ALBUS_NA_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gd304391 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Jun 18 07:23:48 CDT 2019
(bootloader) sbl1.git: git=MBM-NG-VC0.CD-0-g4650d8f
(bootloader) rpm.git: git=bd19194
(bootloader) tz.git: git=20bded9-dirty
(bootloader) devcfg.git: git=20bded9-dirty
(bootloader) keymaster.git: git=20bded9-dirty
(bootloader) cmnlib.git: git=20bded9-dirty
(bootloader) cmnlib64.git: git=20bded9-dirty
(bootloader) prov.git: git=20bded9-dirty
(bootloader) aboot.git: git=MBM-NG-VC0.CD-0-g361b83a
(bootloader) frp-state: protected (210)
(bootloader) ro.carrier: retus
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
(Sorry if I forgot to remove some private info... I only remember threads telling other people to remove IMEI)
edit:
We don't care about recovering any data, just want to get the phone working again. I got the bootloader unlock code from motorola, but it doesn't work. It says:
Code:
(bootloader) Check 'Allow OEM Unlock' in Android Settings > Developer
(bootloader) Options
Tried to use 2 different albus TWRP for recovery, but it can't validate (probably because I can't unlock bootloader)
bump
bump
Hello, I have this device with problems booting android 10. A red legend appears showing "
Failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot Reason: Fail-through from factory boot mode "
I have tried to flash it with various tools like RSD Lite, Odin(NOT shown), and Lenovo User Assistant, all efforts have failed the device always shows the same red legend or sometimes it goes completely black with the charging indicator led blinking. Recovery mode is not accessible.
Please help. Thanks in advance
Rainwod said:
Hello, I have this device with problems booting android 10. A red legend appears showing "
Failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
Fastboot Reason: Fail-through from factory boot mode "
I have tried to flash it with various tools like RSD Lite, Odin(NOT shown), and Lenovo User Assistant, all efforts have failed the device always shows the same red legend or sometimes it goes completely black with the charging indicator led blinking. Recovery mode is not accessible.
Please help. Thanks in advance
Click to expand...
Click to collapse
What does getvar all say? Remove imei before posting
Code:
fastboot getvar all
thanks sd_shadow
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ginna_retail-b0c61b8e633-210609
(bootloader) product: ginna
(bootloader) board: ginna
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG QD63MB RV=08 PV=01 FV=0000000000000001
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: SDM632
(bootloader) serialno: ZY22BLLKRM
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8d
(bootloader) uid: 96F6A8B300000000000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from factory boot mode
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 12-18-2020
(bootloader) sku: XT2052-1
(bootloader) carrier_sku: XT2052-1
(bootloader) battid: SB18C66368
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Sep 9 8:41:56 UTC 2021"
(bootloader) ro.build.fingerprint[0]: motorola/ginna_retail/ginna:10/QPG
(bootloader) ro.build.fingerprint[1]: S30.82-135-7/c2ede:user/release-ke
(bootloader) ro.build.fingerprint[2]: ys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.8.6.2.r1-06600-89xx.0
(bootloader) version-baseband: M632_19.00.03.50.02R GINNA_GWLC_CUST
(bootloader) kernel.version[0]: Linux version 4.9.206-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (gcc version 4.9.x 20150123 (
(bootloader) kernel.version[2]: prerelease) (GCC) ) #1 SMP PREEMPT Wed J
(bootloader) kernel.version[3]: un 9 05:43:55 CDT 2021
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-ginna_retail-b0c61b8e633-210609
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier: retus
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: No
(bootloader) slot-successful:_b: No
(bootloader) slot-bootable:_a: Yes
(bootloader) slot-bootable:_b: Yes
(bootloader) slot-retry-count:_a: 5
(bootloader) slot-retry-count:_b: 0
(bootloader) pcb-part-no: SB28C75450
(bootloader) is-userspace: no
(bootloader) is-logical:
all: listed above
Finished. Total time: 1.609s
i downloaded and try to flash this ROMs:
XT2052-1_GINNA_RETUS_10_QPGS30.82-135-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
GINNA_RETAIL_QPGS30.82_135_16_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml
XT2052-1_GINNA_RETUS_10_QPGS30.82-135-9_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
the variable (bootloader) ro.build.fingerprint[1] does not change its value, it always shows S30.82-135-7/c2ede:user/release-ke even after flashing with RSD Lite.
Thanks a lot
Rainwod said:
thanks sd_shadow
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ginna_retail-b0c61b8e633-210609
(bootloader) product: ginna
(bootloader) board: ginna
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG QD63MB RV=08 PV=01 FV=0000000000000001
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: SDM632
(bootloader) serialno: ZY22BLLKRM
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8d
(bootloader) uid: 96F6A8B300000000000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from factory boot mode
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 12-18-2020
(bootloader) sku: XT2052-1
(bootloader) carrier_sku: XT2052-1
(bootloader) battid: SB18C66368
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Sep 9 8:41:56 UTC 2021"
(bootloader) ro.build.fingerprint[0]: motorola/ginna_retail/ginna:10/QPG
(bootloader) ro.build.fingerprint[1]: S30.82-135-7/c2ede:user/release-ke
(bootloader) ro.build.fingerprint[2]: ys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.8.6.2.r1-06600-89xx.0
(bootloader) version-baseband: M632_19.00.03.50.02R GINNA_GWLC_CUST
(bootloader) kernel.version[0]: Linux version 4.9.206-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (gcc version 4.9.x 20150123 (
(bootloader) kernel.version[2]: prerelease) (GCC) ) #1 SMP PREEMPT Wed J
(bootloader) kernel.version[3]: un 9 05:43:55 CDT 2021
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-ginna_retail-b0c61b8e633-210609
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier: retus
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: No
(bootloader) slot-successful:_b: No
(bootloader) slot-bootable:_a: Yes
(bootloader) slot-bootable:_b: Yes
(bootloader) slot-retry-count:_a: 5
(bootloader) slot-retry-count:_b: 0
(bootloader) pcb-part-no: SB28C75450
(bootloader) is-userspace: no
(bootloader) is-logical:
all: listed above
Finished. Total time: 1.609s
i downloaded and try to flash this ROMs:
XT2052-1_GINNA_RETUS_10_QPGS30.82-135-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
GINNA_RETAIL_QPGS30.82_135_16_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml
XT2052-1_GINNA_RETUS_10_QPGS30.82-135-9_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
the variable (bootloader) ro.build.fingerprint[1] does not change its value, it always shows S30.82-135-7/c2ede:user/release-ke even after flashing with RSD Lite.
Thanks a lot
Click to expand...
Click to collapse
Rsd lite may not work with Windows 10.
Use Windows 7 or xp with rsd lite.
Sometimes this works flash this.
Code:
fastboot flash partition gpt.bin
fastboot reboot bootloader
Then retry LMSA if you have Windows 10 or RSD Lite if you have Windows 7 or XP
sd_shadow said:
(...)
Then retry LMSA if you have Windows 10 or RSD Lite if you have Windows 7 or XP
Click to expand...
Click to collapse
I have tried both methods that you have indicated, in both cases ( RSD lite with Windows XP ) the process ends normally without failures but the result is the same, red Startup Fail legend. Thanks for the help, do you have any other ideas?
Rainwod said:
I have tried both methods that you have indicated, in both cases ( RSD lite with Windows XP ) the process ends normally without failures but the result is the same, red Startup Fail legend. Thanks for the help, do you have any other ideas?
Click to expand...
Click to collapse
It's possible the issue is related to the Persist Partition or other secure partition.
There is a good thread in the Moto G5 Plus forum.
I don't know if any of that discussion applies to the Moto E though.
Fix Persist, resolve IMEI=0, Volte, 4G, Explanation, Requirements
I have created this thread in order to have one thread that details just the solution to fixing your persist, identifying whether or not you have an issue with your persist, and how you can restore your IMEI without hacks. This guide is written...
forum.xda-developers.com
Honestly looks like a cross flash to retus, followed by a bootloader lock. I don't think you can trust any fastboot variables if that's the case. You'd just have to flash boot.img for every model and variant of the E 2020 until you find the one that is allowed to boot.
Hello! I'm in a stupor, there's no way to revive my G7 play (XT1952-1)
P/n: PAE70020RU
The bootloader cannot be unlocked with commands, everything returns with errors. If I try to turn on phone, I see a lot of inscriptions on the screen, among them "failed to validate boot image"
If I try unlock bootloader I have
Spoiler: fastboot oem unlock
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem get_unlock_data
...
(bootloader) Unlock data:
(bootloader) read datablock error
(bootloader) Failed
OKAY [ 0.020s]
or
Spoiler: fastboot getvar all
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader[0]: MBM-2.1-channel_retail-4376d256f0a-2
(bootloader) version-bootloader[1]: 10129
(bootloader) product: channel
(bootloader) board: channel
(bootloader) secure: yes
(bootloader) hwrev: PVTB
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG QD63MB RV=08 PV=01 FV=0000000000000001
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: SDM632
(bootloader) serialno: 97a4c6b2
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: EDC9602200000000000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from normal boot mode
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-channel_retail-4376d256f0a-210129
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot: b
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _b
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: Yes
(bootloader) slot-successful:_b: Yes
(bootloader) slot-bootable:_a: Yes
(bootloader) slot-bootable:_b: Yes
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 6
(bootloader) pcb-part-no:
all: listed above
finished. total time: 0.196s
What should I do?
RSA answer: This device is not supported
upd: If I try https://forum.xda-developers.com/t/hard-bricked-moto-g7-play.4096413/post-82634585, I recieve
< waiting for device >
That's all
Try with this tool (make EFS backup if you can because after installing Stock ROM from here, you will lose signal and you will have to flash EFS again)
Rescue and Smart Assistant Tool - Motorola
<h6><span style="color:#FFFFFF"><strong>Our Rescue and Smart Assistant tool</strong><br />can help diagnose and resolve issues on your<br />Motorola phone or Lenovo phone/tablet.</span></h6>
www.motorola.com
Note: even without opening the program, it does install Bootloader/Fastboot neccesary drivers, so you can download official TWRP for Moto G7 Play (Channel) and use the command fastboot boot (recovery name).img, then do an EFS backup on SD Card, or do it on internal storage then put it on your pc when on TWRP